H3C-EVI-MIB
99 objects
This MIB contains the objects for managing Ethernet Virtual Interconnect(EVI).
Imported Objects
| HUAWEI-3COM-OID-MIB | h3cCommon |
| IF-MIB | -- RFC4001 ifIndex |
| INET-ADDRESS-MIB | -- RFC4363 InetAddress InetAddressType |
| ISIS-MIB | -- RFC2233 IsisSystemID |
| Q-BRIDGE-MIB | -- RFC2579 VlanId |
| SNMPv2-SMI | Counter32 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | -- RFC2578 TEXTUAL-CONVENTION DisplayString MacAddress RowStatus TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2011.10.2.132 | Identityh3cEvi | This MIB contains the objects for managing Ethernet Virtual Interconnect(EVI). | ||
| 1.3.6.1.4.1.2011.10.2.132.0 | Nodeh3cEviNotifications | |||
| 1.3.6.1.4.1.2011.10.2.132.0.1 | Notificationh3cEviNewDed | current | Notifies that a new DED has been elected. | |
| 1.3.6.1.4.1.2011.10.2.132.0.2 | Notificationh3cEviSiteEDTopoChange | current | Notifies that the EVI network topology has changed. | |
| 1.3.6.1.4.1.2011.10.2.132.0.3 | Notificationh3cEviEDLinkDisconnect | current | Notifies that all the EVI links on a tunnel are down. | |
| 1.3.6.1.4.1.2011.10.2.132.1 | Nodeh3cEviObjects | |||
| 1.3.6.1.4.1.2011.10.2.132.1.1 | Nodeh3cEviBase | |||
| 1.3.6.1.4.1.2011.10.2.132.1.1.1 | Scalarh3cEviDesignatedVlan | read-write | current | The designated VLAN is used for edge devices on a multihomed site to exchange EVI IS-IS hello packets for DED election and extended-VLAN assignment. |
| 1.3.6.1.4.1.2011.10.2.132.1.1.2 | Scalarh3cEviSiteID | read-write | current | Site ID. The edge devices in the same site must have the same site ID. |
| 1.3.6.1.4.1.2011.10.2.132.1.2 | Nodeh3cEviIf | |||
| 1.3.6.1.4.1.2011.10.2.132.1.2.1 | Tableh3cEviIfExtendVlanTable | not-accessible | current | A table that contains extended VLAN entries. A site extends extended VLANs to remote sites over an EVI tunnel. |
| 1.3.6.1.4.1.2011.10.2.132.1.2.1.1 | Rowh3cEviIfExtendVlanEntry | not-accessible | current | Detailed information about each extended VLAN. |
| 1.3.6.1.4.1.2011.10.2.132.1.2.1.1.1 | Columnh3cEviIfExtendVlanIndex | not-accessible | current | Each VLAN index specifies a VLAN ID in the range of 1 to 4094. |
| 1.3.6.1.4.1.2011.10.2.132.1.2.1.1.2 | Columnh3cEviIfExtendVlanLAV | read-only | current | Local Active VLANs (LAVs), which are active VLANs on the EVI tunnel interface. The interface can extend only active VLANs to remote sites. |
| 1.3.6.1.4.1.2011.10.2.132.1.2.1.1.3 | Columnh3cEviIfExtendVlanRowStatus | read-create | current | Entry status. |
| 1.3.6.1.4.1.2011.10.2.132.1.2.2 | Tableh3cEviIfVlanMappingTable | not-accessible | current | VLAN mapping table on the interface. |
| 1.3.6.1.4.1.2011.10.2.132.1.2.2.1 | Rowh3cEviIfVlanMappingEntry | not-accessible | current | Detailed information about each VLAN mapping. |
| 1.3.6.1.4.1.2011.10.2.132.1.2.2.1.1 | Columnh3cEviIfVlanMappingSiteId | not-accessible | current | Site ID of the interface on which the VLAN mapping is configured. If '0' is specified, the operation applies to all sites. |
| 1.3.6.1.4.1.2011.10.2.132.1.2.2.1.2 | Columnh3cEviIfVlanMappingSrc | not-accessible | current | Local VLAN ID in the mapping. |
| 1.3.6.1.4.1.2011.10.2.132.1.2.2.1.3 | Columnh3cEviIfVlanMappingDst | not-accessible | current | Remote VLAN ID in the mapping. |
| 1.3.6.1.4.1.2011.10.2.132.1.2.2.1.4 | Columnh3cEviIfVlanMappingRowStatus | read-create | current | Entry status. |
| 1.3.6.1.4.1.2011.10.2.132.1.2.3 | Tableh3cEviIfAttributeTable | not-accessible | current | A table that contains EVI tunnel attribute entries. |
| 1.3.6.1.4.1.2011.10.2.132.1.2.3.1 | Rowh3cEviIfAttributeEntry | not-accessible | current | Detailed information about the attributes of each EVI tunnel. |
| 1.3.6.1.4.1.2011.10.2.132.1.2.3.1.1 | Columnh3cEviIfFloodingMode | read-write | current | State of the EVI flooding function. The function is enabled if the value is set to true. |
| 1.3.6.1.4.1.2011.10.2.132.1.2.3.1.2 | Columnh3cEviIfARPSuppression | read-write | current | State of the ARP flooding suppression function. The function is enabled if the value is set to true. |
| 1.3.6.1.4.1.2011.10.2.132.1.2.4 | Tableh3cEviIfFloodingMacTable | not-accessible | current | A table that contains MAC addresses configured for selective flooding. |
| 1.3.6.1.4.1.2011.10.2.132.1.2.4.1 | Rowh3cEviIfFloodingMacEntry | not-accessible | current | Detailed information about each MAC address used for EVI selective flooding. |
| 1.3.6.1.4.1.2011.10.2.132.1.2.4.1.1 | Columnh3cEviIfFloodingMacAddress | not-accessible | current | MAC address used for EVI selective flooding. |
| 1.3.6.1.4.1.2011.10.2.132.1.2.4.1.2 | Columnh3cEviIfFloodMacVlanIndex | not-accessible | current | The VLAN that contains the MAC address. |
| 1.3.6.1.4.1.2011.10.2.132.1.2.4.1.3 | Columnh3cEviIfFloodingMacRowStatus | read-create | current | State of the MAC address entry. You can use this object to create or delete entries. Deleting entries does not delete this object. |
| 1.3.6.1.4.1.2011.10.2.132.1.3 | Nodeh3cEviMac | |||
| 1.3.6.1.4.1.2011.10.2.132.1.3.1 | Tableh3cEviMacCountTable | not-accessible | current | EVI MAC statistics table. The table contains MAC entry counts sorted by MAC address types, including local MACs, local MAC conflicts, remote MACs, and remote M… |
| 1.3.6.1.4.1.2011.10.2.132.1.3.1.1 | Rowh3cEviMacCountEntry | not-accessible | current | EVI MAC entry counts. |
| 1.3.6.1.4.1.2011.10.2.132.1.3.1.1.1 | Columnh3cEviMacLocalMacs | read-only | current | Number of local MACs. |
| 1.3.6.1.4.1.2011.10.2.132.1.3.1.1.2 | Columnh3cEviMacLocalConflicts | read-only | current | Number of local MACs that conflict with remote MACs. |
| 1.3.6.1.4.1.2011.10.2.132.1.3.1.1.3 | Columnh3cEviMacRemoteMacs | read-only | current | Number of remote MACs received from remote edge devices. |
| 1.3.6.1.4.1.2011.10.2.132.1.3.1.1.4 | Columnh3cEviMacRemoteConflicts | read-only | current | Number of remote MACs that conflict with local MACs. |
| 1.3.6.1.4.1.2011.10.2.132.1.3.2 | Tableh3cEviMacLocalTable | not-accessible | current | MAC address table that only contains MAC addresses at the site. |
| 1.3.6.1.4.1.2011.10.2.132.1.3.2.1 | Rowh3cEviMacLocalEntry | not-accessible | current | Detailed informaiton about each local MAC entry. |
| 1.3.6.1.4.1.2011.10.2.132.1.3.2.1.1 | Columnh3cEviMacLocalVlan | not-accessible | current | VLANs that contain the local MACs. |
| 1.3.6.1.4.1.2011.10.2.132.1.3.2.1.2 | Columnh3cEviMacLocalMacAddr | not-accessible | current | Local MAC addresses. |
| 1.3.6.1.4.1.2011.10.2.132.1.3.2.1.3 | Columnh3cEviMacLocalMacType | read-only | current | MAC address types, including: dynamic MACs, static MACs, and flood MACs (MACs configured for selective flooding). |
| 1.3.6.1.4.1.2011.10.2.132.1.3.2.1.4 | Columnh3cEviMacLocalConflict | read-only | current | Whether the MAC conflicts with any remote MAC. |
| 1.3.6.1.4.1.2011.10.2.132.1.3.2.1.5 | Columnh3cEviMacLocalFiltered | read-only | current | Whether the MAC is filtered. |
| 1.3.6.1.4.1.2011.10.2.132.1.3.3 | Tableh3cEviMacRemoteTable | not-accessible | current | A table contains MAC addresses received from remote edge devices. |
| 1.3.6.1.4.1.2011.10.2.132.1.3.3.1 | Rowh3cEviMacRemoteEntry | not-accessible | current | Detailed information about each remote MAC. |
| 1.3.6.1.4.1.2011.10.2.132.1.3.3.1.1 | Columnh3cEviMacRemoteVlan | not-accessible | current | VLANs that contain remote MAC addresses. |
| 1.3.6.1.4.1.2011.10.2.132.1.3.3.1.2 | Columnh3cEviMacRemoteMacAddr | not-accessible | current | Remote MAC address. |
| 1.3.6.1.4.1.2011.10.2.132.1.3.3.1.3 | Columnh3cEviMacRemoteMacEffect | read-only | current | Whether the MAC can be used for forwarding traffic. |
| 1.3.6.1.4.1.2011.10.2.132.1.3.3.1.4 | Columnh3cEviMacRemoteConflict | read-only | current | The remote MAC conflicts with a local MAC. |
| 1.3.6.1.4.1.2011.10.2.132.1.4 | Nodeh3cEviProcess | |||
| 1.3.6.1.4.1.2011.10.2.132.1.4.1 | Tableh3cEviProcessPolicyTable | not-accessible | current | A table that contains routing policy information for each EVI IS-IS process. |
| 1.3.6.1.4.1.2011.10.2.132.1.4.1.1 | Rowh3cEviProcessPolicyEntry | not-accessible | current | Detailed information about the routing policy for each EVI IS-IS process. |
| 1.3.6.1.4.1.2011.10.2.132.1.4.1.1.1 | Columnh3cEviProcessId | accessible-for-notify | current | EVI IS-IS process ID. |
| 1.3.6.1.4.1.2011.10.2.132.1.4.1.1.2 | Columnh3cEviProcessPolicy | read-write | current | Routing policy for the EVI IS-IS process. |
| 1.3.6.1.4.1.2011.10.2.132.1.4.2 | Tableh3cEviProcessGrTable | not-accessible | current | A table that contains graceful restart (GR) information. |
| 1.3.6.1.4.1.2011.10.2.132.1.4.2.1 | Rowh3cEviProcessGrEntry | not-accessible | current | Detailed GR information for each EVI IS-IS process. |
| 1.3.6.1.4.1.2011.10.2.132.1.4.2.1.1 | Columnh3cEviProcessGrEnable | read-write | current | Whether the GR function is enabled. |
| 1.3.6.1.4.1.2011.10.2.132.1.4.2.1.2 | Columnh3cEviProcessGrInterval | read-write | current | EVI IS-IS GR interval in the range of 30 to 1800, in seconds. |
| 1.3.6.1.4.1.2011.10.2.132.1.4.3 | Tableh3cEviProcessVSysTable | not-accessible | current | A table that contains virtual system entries. Virtual systems are associated with EVI IS-IS processes. |
| 1.3.6.1.4.1.2011.10.2.132.1.4.3.1 | Rowh3cEviProcessVSysEntry | not-accessible | current | Detailed information about each vitual system. |
| 1.3.6.1.4.1.2011.10.2.132.1.4.3.1.1 | Columnh3cEviVirtualSysId | not-accessible | current | Virtual system ID in hexadecimal notation. The virtual system ID must be unique in the EVI network. |
| 1.3.6.1.4.1.2011.10.2.132.1.4.3.1.2 | Columnh3cEviVirtualSysRowStatus | read-create | current | Entry status. |
| 1.3.6.1.4.1.2011.10.2.132.1.5 | Nodeh3cEviISIS | |||
| 1.3.6.1.4.1.2011.10.2.132.1.5.1 | Tableh3cEviISISNbrSummaryTable | not-accessible | current | EVI neighbor statistics table. |
| 1.3.6.1.4.1.2011.10.2.132.1.5.1.1 | Rowh3cEviISISNbrSummaryEntry | not-accessible | current | EVI neighbor statistics table entries. The entries contain the EVI neighbor summary for each EVI IS-IS process. |
| 1.3.6.1.4.1.2011.10.2.132.1.5.1.1.1 | Columnh3cEviISISNbrMaxMultiHomes | read-only | current | The maximum number of edge devices that the site can contain. |
| 1.3.6.1.4.1.2011.10.2.132.1.5.1.1.2 | Columnh3cEviISISNbrSiteNbrs | read-only | current | The count of neighbors that belong to the same site. |
| 1.3.6.1.4.1.2011.10.2.132.1.5.1.1.3 | Columnh3cEviISISNbrLinkNbrs | read-only | current | The count of neighbors that are in remote sites. |
| 1.3.6.1.4.1.2011.10.2.132.1.5.2 | Tableh3cEviISISNbrTable | not-accessible | current | A table that contains generic information about all neighbors. |
| 1.3.6.1.4.1.2011.10.2.132.1.5.2.1 | Rowh3cEviISISNbrEntry | not-accessible | current | Detailed information about each neighbor of the edge device. |
| 1.3.6.1.4.1.2011.10.2.132.1.5.2.1.1 | Columnh3cEviISISNbrSysId | accessible-for-notify | current | System ID of the neighbor. |
| 1.3.6.1.4.1.2011.10.2.132.1.5.2.1.2 | Columnh3cEviISISNbrMacAddr | read-only | current | MAC address of the neighbor. |
| 1.3.6.1.4.1.2011.10.2.132.1.5.2.1.3 | Columnh3cEviISISNbrSiteId | read-only | current | Site ID of the neighbor. |
| 1.3.6.1.4.1.2011.10.2.132.1.5.2.1.4 | Columnh3cEviISISNbrTransStatus | read-only | current | State of EVI transport-facing links. |
| 1.3.6.1.4.1.2011.10.2.132.1.6 | Nodeh3cEviEnable | |||
| 1.3.6.1.4.1.2011.10.2.132.1.6.1 | Tableh3cEviEnableTable | not-accessible | current | A table that contains all EVI-enabled neighboring ports of the edge device. |
| 1.3.6.1.4.1.2011.10.2.132.1.6.1.1 | Rowh3cEviEnableEntry | not-accessible | current | Detailed information about each EVI-enabled port in the EVI network. |
| 1.3.6.1.4.1.2011.10.2.132.1.6.1.1.1 | Columnh3cEviEnableStatus | read-write | current | End station service disable (trunk port) bit. When this bit is set (true), all native frames received on the port and all native frames that would have been se… |
| 1.3.6.1.4.1.2011.10.2.132.1.7 | Nodeh3cEviNbr | |||
| 1.3.6.1.4.1.2011.10.2.132.1.7.1 | Tableh3cEviNbrBaseTable | not-accessible | current | A table that contains basic information about the EVI Neighbor Discovery Protocol (ENDP). |
| 1.3.6.1.4.1.2011.10.2.132.1.7.1.1 | Rowh3cEviNbrBaseEntry | not-accessible | current | Detailed information about ENDP for each EVI tunnel. |
| 1.3.6.1.4.1.2011.10.2.132.1.7.1.1.1 | Columnh3cEviNbrSelfServerStatus | read-write | current | If the value is set to true, the EVI neighbor discovery server (ENDS) is enabled. When you enable ENDS on an EVI tunnel interface, an EVI neighbor discovery cl… |
| 1.3.6.1.4.1.2011.10.2.132.1.7.1.1.2 | Columnh3cEviNbrAuthPassword | read-write | current | ENDP authentication key. It is a zero-length string when being read. |
| 1.3.6.1.4.1.2011.10.2.132.1.7.1.1.3 | Columnh3cEviNbrClientRegisterInterval | read-write | current | Interval at which the ENDCs on an EVI tunnel interface update their registration with their ENDSs. |
| 1.3.6.1.4.1.2011.10.2.132.1.7.2 | Tableh3cEviNbrRemoteServerTable | not-accessible | current | A table that contains basic information about the remote ENDSs. |
| 1.3.6.1.4.1.2011.10.2.132.1.7.2.1 | Rowh3cEviNbrRemoteServerEntry | not-accessible | current | Detailed information about each remote ENDS. When you set the address of a remote ENDS on an EVI tunnel interface, an ENDC is enabled automatically on the EVI … |
| 1.3.6.1.4.1.2011.10.2.132.1.7.2.1.1 | Columnh3cEviNbrRemoteServerType | not-accessible | current | Address type of the remote ENDS, including ipv4 and ipv6. |
| 1.3.6.1.4.1.2011.10.2.132.1.7.2.1.2 | Columnh3cEviNbrRemoteServer | not-accessible | current | Address of the remote ENDS. The address type is specified by the h3cEviNbrRemoteServerType object. Address length (4 or 16 bytes) must be consistent with the a… |
| 1.3.6.1.4.1.2011.10.2.132.1.7.2.1.3 | Columnh3cEviNbrRemoteServerRowStatus | read-create | current | Entry status. This object is used to create or delete entries. Deleting entries does not delete this object. |
| 1.3.6.1.4.1.2011.10.2.132.1.7.3 | Tableh3cEviNbrTable | not-accessible | current | A table that contains basic information about neighbors discovered with ENDP. |
| 1.3.6.1.4.1.2011.10.2.132.1.7.3.1 | Rowh3cEviNbrEntry | not-accessible | current | Detailed information about each EVI neighbor. |
| 1.3.6.1.4.1.2011.10.2.132.1.7.3.1.1 | Columnh3cEviNbrAddressType | not-accessible | current | Address type of the neighbor, including ipv4 and ipv6. |
| 1.3.6.1.4.1.2011.10.2.132.1.7.3.1.2 | Columnh3cEviNbrAddress | not-accessible | current | Address of the neighbor. The address type is specified by the h3cEviNbrAddressType object. Address length (4 or 16 bytes) must be consistent with the address t… |
| 1.3.6.1.4.1.2011.10.2.132.1.7.3.1.3 | Columnh3cEviNbrSystemID | read-only | current | System ID of the neighbor. |
| 1.3.6.1.4.1.2011.10.2.132.1.7.3.1.4 | Columnh3cEviNbrExpireTime | read-only | current | Expiration time of the neighbor. |
| 1.3.6.1.4.1.2011.10.2.132.1.7.3.1.5 | Columnh3cEviNbrStatus | read-only | current | State of the neighbor. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| H3cEviMacType | INTEGER { other(1), dynamic(2), static(3), flood(4) } | current | MAC addresses include three types: dynamic, static, and flood (MACs configured for selective flooding). |
| H3cEviNeighborStatus | INTEGER { up(1), down(2) } | current | State of EVI neighbors. |