H3C-FAILOVER-MIB
25 objects
This MIB file is to provide the definition of failover group. Such as: 1. Configure Failover Groups for a device and display Failover Groups and their status. 2. Assign CPU to the Failover Group, and display their status. Failover Group: A failover group contains a primary node and a secondary node. When a failover group is referenced by a service module, the primary node processes services and backs up service data to the secondary node. The secondary node does not process services, but it takes over the services when the primary node fails. When the primary node is recovered, traffic is switched to the primary node again.
Imported Objects
| HUAWEI-3COM-OID-MIB | h3cCommon |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString RowStatus |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2011.10.2.164 | Identityh3cFailover | This MIB file is to provide the definition of failover group. Such as: 1. Configure Failover Groups for a device and display Failover Groups and their status. … | ||
| 1.3.6.1.4.1.2011.10.2.164.1 | Nodeh3cFailoverScalarObjects | |||
| 1.3.6.1.4.1.2011.10.2.164.1.1 | Scalarh3cFailoverMaxNum | read-only | current | The maximum number of Failover groups which the system supported to create, does not include the AutoBackup. |
| 1.3.6.1.4.1.2011.10.2.164.1.2 | Scalarh3cFailoverCurrentNum | read-only | current | The current number of Failover groups which the system has created, does not include the AutoBackup. |
| 1.3.6.1.4.1.2011.10.2.164.2 | Nodeh3cFailoverTables | |||
| 1.3.6.1.4.1.2011.10.2.164.2.1 | Tableh3cFailoverCfgTable | not-accessible | current | This table is for configuration of backup group. |
| 1.3.6.1.4.1.2011.10.2.164.2.1.1 | Rowh3cFailoverCfgEntry | not-accessible | current | An entry of the h3cFailoverGroupCfgTable. |
| 1.3.6.1.4.1.2011.10.2.164.2.1.1.1 | Columnh3cFailoverIndex | accessible-for-notify | current | Failover group ID is used as group index, the value range of failover group ID depends on the device model. The failover GroupIndex cannot be modified after cr… |
| 1.3.6.1.4.1.2011.10.2.164.2.1.1.2 | Columnh3cFailoverName | read-create | current | Specifies the backup group name, a case-sensitive string of 1 to 63 characters. The failover group name cannot be modified after creation. The name can not inc… |
| 1.3.6.1.4.1.2011.10.2.164.2.1.1.3 | Columnh3cFailoverPrimaryChassisID | read-create | current | Specifies a card on an IRF member device. The chassis-number argument represents the member ID of the IRF member device. (Distributed devices In IRF mode.) On … |
| 1.3.6.1.4.1.2011.10.2.164.2.1.1.4 | Columnh3cFailoverPrimarySlotID | read-create | current | Specifies a card by its slot number. (Distributed devices In standalone mode.) Note:The -1 for delete the node. |
| 1.3.6.1.4.1.2011.10.2.164.2.1.1.5 | Columnh3cFailoverPrimaryCpuID | read-create | current | Specifies a CPU by its number. This option is available only if multiple CPUs are available on the specified slot. Note:The -1 for delete the node. |
| 1.3.6.1.4.1.2011.10.2.164.2.1.1.6 | Columnh3cFailoverSecondaryChassisID | read-create | current | Specifies a card on an IRF member device. The chassis-number argument represents the member ID of the IRF member device. (Distributed devices In IRF mode.) On … |
| 1.3.6.1.4.1.2011.10.2.164.2.1.1.7 | Columnh3cFailoverSecondarySlotID | read-create | current | Specifies a card by its slot number. (Distributed devices In standalone mode.) Note:The -1 for delete the node. |
| 1.3.6.1.4.1.2011.10.2.164.2.1.1.8 | Columnh3cFailoverSecondaryCpuID | read-create | current | Specifies a CPU by its number. This option is available only if multiple CPUs are available on the specified slot. Note:The -1 for delete the node. |
| 1.3.6.1.4.1.2011.10.2.164.2.1.1.9 | Columnh3cFailoverState | read-only | current | Backup group state: Initial: No node in the failover group is processing services. Normal: The primary node is processing services. Fault: The secondary node i… |
| 1.3.6.1.4.1.2011.10.2.164.2.1.1.10 | Columnh3cFailoverRowStatus | read-create | current | The status of this table entry. Only support active(1), createAndGo(4) and destroy(6). |
| 1.3.6.1.4.1.2011.10.2.164.3 | Nodeh3cFailoverNotification | |||
| 1.3.6.1.4.1.2011.10.2.164.3.0 | Nodeh3cFailoverTrap | |||
| 1.3.6.1.4.1.2011.10.2.164.3.0.1 | Notificationh3cFailoverCreate | current | The h3cFailoverCreate trap indicates that the failover group has created. | |
| 1.3.6.1.4.1.2011.10.2.164.3.0.2 | Notificationh3cFailoverDelete | current | The h3cFailoverDelete trap indicates that the failover group has deleted. | |
| 1.3.6.1.4.1.2011.10.2.164.3.0.3 | Notificationh3cFailoverPrimaryNodeAdd | current | The h3cFailoverPrimaryNodeAdd trap indicates that the failover group has added the primary node. | |
| 1.3.6.1.4.1.2011.10.2.164.3.0.4 | Notificationh3cFailoverPrimaryNodeRemove | current | The h3cFailoverPrimaryNodeRemove trap indicates that the failover group has removed the primary node. | |
| 1.3.6.1.4.1.2011.10.2.164.3.0.5 | Notificationh3cFailoverSecondaryNodeAdd | current | The h3cFailoverSecondaryNodeAdd trap indicates that the failover group has added the secondary node. | |
| 1.3.6.1.4.1.2011.10.2.164.3.0.6 | Notificationh3cFailoverSecondaryNodeRemove | current | The h3cFailoverSecondaryNodeRemove trap indicates that the failover group has removed the secondary node. |