H3C-FCOE-MIB
66 objects
This MIB module is for configuring and monitoring Fibre Channel over Ethernet (FCoE) related entities. This MIB defines a Virtual FC (VFC) Interface as an object that represents either a VF_Port or a VE_Port on an FCoE Forwarder (FCF). VFC interfaces can be created either statically (by management request) or dynamically (at the time of FIP based FLOGI or ELP request). Other terminologies used in this MIB are defined by the H3c FCoE standard, as defined in the FC-BB-5 specification. This MIB also supports configuration of the following objects: - Mapping of FCoE VLAN-ID used to carry traffic for a Fabric - FC-MAP value used by the FCF operating in FPMA mode - FIP snooping related objects
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2011.10.2.120 | Identityh3cFCoE | This MIB module is for configuring and monitoring Fibre Channel over Ethernet (FCoE) related entities. This MIB defines a Virtual FC (VFC) Interface as an obje… | ||
| 1.3.6.1.4.1.2011.10.2.120.1 | Nodeh3cFCoEObjects | |||
| 1.3.6.1.4.1.2011.10.2.120.1.1 | Nodeh3cFCoEConfig | |||
| 1.3.6.1.4.1.2011.10.2.120.1.1.1 | Tableh3cFCoECfgTable | not-accessible | current | This table facilitates configuration of FCoE parameters on a per Fibre Channel management instance. |
| 1.3.6.1.4.1.2011.10.2.120.1.1.1.1 | Rowh3cFCoECfgEntry | not-accessible | current | There is one entry in this table for each Fibre Channel management instance. |
| 1.3.6.1.4.1.2011.10.2.120.1.1.1.1.1 | Columnh3cFCoECfgFcmap | read-write | current | This object configures the FC-MAP value used by the FCF when operating in FPMA mode. The default value is 0EFC00h, as written in the standard. |
| 1.3.6.1.4.1.2011.10.2.120.1.1.1.1.2 | Columnh3cFCoECfgDynamicVfcCreation | read-write | current | This object is set to 'true' to enable, or 'false' to disable, the dynamic creation of VFC interfaces on this FCF. When set to 'true', VFC interfaces are dynam… |
| 1.3.6.1.4.1.2011.10.2.120.1.1.1.1.3 | Columnh3cFCoECfgDefaultFCFPriority | read-write | current | The FIP priority value advertised by the FCF to ENodes by default. h3cFCoEStaticVfcFCFPriority configured for a VFC interface overrides this setting for the EN… |
| 1.3.6.1.4.1.2011.10.2.120.1.1.1.1.4 | Columnh3cFCoECfgDATov | read-write | current | The Discovery_Advertisement_Timeout value configured for the FCF. This is used as the timeout value in seconds by the FCF to send periodic Discovery Advertisem… |
| 1.3.6.1.4.1.2011.10.2.120.1.1.1.1.5 | Columnh3cFCoECfgAddressingMode | read-write | current | Addressing mode(s) supported by the FCF. Implementations should fail SetRequests for unsupported modes. |
| 1.3.6.1.4.1.2011.10.2.120.1.1.2 | Tableh3cFCoEVLANTable | not-accessible | current | In fabrics in which VLANs are deployed, this table facilitates configuration of VLAN and Virtual Fabric associations in an FCoE network. In such fabrics, FCoE … |
| 1.3.6.1.4.1.2011.10.2.120.1.1.2.1 | Rowh3cFCoEVLANEntry | not-accessible | current | There is one entry in this table for each VLAN that is designated to transport FCoE traffic for a given Virtual Fabric. |
| 1.3.6.1.4.1.2011.10.2.120.1.1.2.1.1 | Columnh3cFCoEVLANIndex | not-accessible | current | This object identifies the VLAN-ID that the FCoE FCF function is being enabled for. |
| 1.3.6.1.4.1.2011.10.2.120.1.1.2.1.2 | Columnh3cFCoEFabricIndex | not-accessible | current | This object identifies the Fabric Index of the Virtual Fabric traffic which is to be transported over the VLAN identified by h3cFCoEVLANIndex. |
| 1.3.6.1.4.1.2011.10.2.120.1.1.2.1.3 | Columnh3cFCoEVLANOperState | read-only | current | Operational state of this VLAN-Virtual Fabric association entry. The 'up' state is achieved when both the Virtual Fabric and VLAN are valid. |
| 1.3.6.1.4.1.2011.10.2.120.1.1.2.1.4 | Columnh3cFCoEVLANRowStatus | read-create | current | The status of this conceptual row. The RowStatus becomes active on successful creation of an entry. |
| 1.3.6.1.4.1.2011.10.2.120.1.1.3 | Tableh3cFCoEStaticVfcTable | not-accessible | current | This table facilitates the creation and deletion of static VFC interfaces. While VFCs can be dynamically created based on FIP FLOGI/ELP requests, operators may… |
| 1.3.6.1.4.1.2011.10.2.120.1.1.3.1 | Rowh3cFCoEStaticVfcEntry | not-accessible | current | There is one entry in this table for each statically created VFC Interface. |
| 1.3.6.1.4.1.2011.10.2.120.1.1.3.1.1 | Columnh3cFCoEStaticVfcIndex | not-accessible | current | This index uniquely identifies a static VFC entry in this table. |
| 1.3.6.1.4.1.2011.10.2.120.1.1.3.1.2 | Columnh3cFCoEStaticVfcFCFPriority | read-create | current | If this VFC is for a VF_Port this object is used to configure FCF priority to be advertised to the ENode associated with the VFC. |
| 1.3.6.1.4.1.2011.10.2.120.1.1.3.1.3 | Columnh3cFCoEStaticVfcBindType | read-create | current | The mechanism to identify the ENode associated with this VFC if it is of type VF_Port or to identify the remote-FCF associated with this VFC if it is of type V… |
| 1.3.6.1.4.1.2011.10.2.120.1.1.3.1.4 | Columnh3cFCoEStaticVfcBindIfIndex | read-create | current | This object is applicable only when the local FCF is directly connected to an ENode or remote-FCF over a specific Ethernet interface, in which case this object… |
| 1.3.6.1.4.1.2011.10.2.120.1.1.3.1.5 | Columnh3cFCoEStaticVfcBindMACAddress | read-create | current | This object is applicable when the ENode or remote-FCF to which the local FCF is connected is identified by a MAC address. A FIP frame from an ENode or remote-… |
| 1.3.6.1.4.1.2011.10.2.120.1.1.3.1.6 | Columnh3cFCoEStaticVfcIfIndex | read-only | current | The ifIndex of this Virtual FC interface. |
| 1.3.6.1.4.1.2011.10.2.120.1.1.3.1.7 | Columnh3cFCoEStaticVfcCreationTime | read-only | current | The timestamp of this entry's creation time. |
| 1.3.6.1.4.1.2011.10.2.120.1.1.3.1.8 | Columnh3cFCoEStaticVfcFailureCause | read-only | current | The cause of failure for the last bind operation. This object will be zero length if and only if the bind is successful. |
| 1.3.6.1.4.1.2011.10.2.120.1.1.3.1.9 | Columnh3cFCoEStaticVfcRowStatus | read-create | current | The status of this conceptual row. The RowStatus becomes active on successful creation of a VFC. The VFC does not need to be bound for the row to be active, bu… |
| 1.3.6.1.4.1.2011.10.2.120.1.1.4 | Tableh3cFCoEFIPSnoopingTable | not-accessible | current | FCoE provides increased flexibility, but with this flexibility new challenges arise in assuring highly robust Fabrics. The FCF does not have the complete contr… |
| 1.3.6.1.4.1.2011.10.2.120.1.1.4.1 | Rowh3cFCoEFIPSnoopingEntry | not-accessible | current | There is one entry in this table for each VLAN that is designated to ensure that only valid FCoE traffic is allowed. |
| 1.3.6.1.4.1.2011.10.2.120.1.1.4.1.1 | Columnh3cFCoEFIPSnoopingVLANIndex | not-accessible | current | This object identifies the VLAN-ID that the FIP Snooping function is being enabled for. |
| 1.3.6.1.4.1.2011.10.2.120.1.1.4.1.2 | Columnh3cFCoEFIPSnoopingEnable | read-write | current | This object is used to enable or disable FIP Snooping on an Ethernet Bridge. |
| 1.3.6.1.4.1.2011.10.2.120.1.1.4.1.3 | Columnh3cFCoEFIPSnoopingFcmap | read-write | current | This object configures the FC-MAP value associated with the FIP snooping Ethernet Bridge. |
| 1.3.6.1.4.1.2011.10.2.120.1.1.5 | Tableh3cFCoEVlanCfgTable | not-accessible | current | A table contains FCoE related configurations and information of VLANs. An entry in this table is created when the corresponding VLAN is created and FCoE is ena… |
| 1.3.6.1.4.1.2011.10.2.120.1.1.5.1 | Rowh3cFCoEVlanCfgEntry | not-accessible | current | An entry used for managing the FCoE related configurations of a VLAN. |
| 1.3.6.1.4.1.2011.10.2.120.1.1.5.1.1 | Columnh3cFCoEVlanCfgFcmap | read-create | current | This object configures the FC-MAP value used by the FCF in a VLAN when operating in FPMA mode. If this object is not configured, the default value is 0EFC00h. |
| 1.3.6.1.4.1.2011.10.2.120.1.1.5.1.2 | Columnh3cFCoEVlanCfgFCFPriority | read-create | current | The FIP priority value advertised by the FCF in a VLAN to ENodes by default. If this object is not configured, the default value is 128. |
| 1.3.6.1.4.1.2011.10.2.120.1.1.5.1.3 | Columnh3cFCoEVlanCfgDATov | read-create | current | The Discovery_Advertisement_Timeout value configured for the FCF in a VLAN. This is used as the timeout value in seconds by the FCF in a VLAN to send periodic … |
| 1.3.6.1.4.1.2011.10.2.120.1.1.5.1.4 | Columnh3cFCoEVlanCfgRowStatus | read-create | current | Now only three states are supported: createAndGo, active, and destroy. |
| 1.3.6.1.4.1.2011.10.2.120.1.1.6 | Tableh3cFCoEFIPSnoopingFCFTable | not-accessible | current | A table contains the remote FCF information on device. |
| 1.3.6.1.4.1.2011.10.2.120.1.1.6.1 | Rowh3cFCoEFIPSnoopingFCFEntry | not-accessible | current | Each entry contains information about a FCF for a VLAN. |
| 1.3.6.1.4.1.2011.10.2.120.1.1.6.1.1 | Columnh3cFCoEFIPSnoopingFCFVLANIndex | not-accessible | current | This object identifies the VLAN-ID whose FIP Snooping function gets ready on the FCF. |
| 1.3.6.1.4.1.2011.10.2.120.1.1.6.1.2 | Columnh3cFCoEFIPSnoopingFCFIfIndex | not-accessible | current | This index uniquely identifies an Ethernet interface that connects to the FCF. |
| 1.3.6.1.4.1.2011.10.2.120.1.1.6.1.3 | Columnh3cFCoEFIPSnoopingFCFMAC | not-accessible | current | The MAC address of the Ethernet interface on the FCF directly connected to the local device. |
| 1.3.6.1.4.1.2011.10.2.120.1.1.6.1.4 | Columnh3cFCoEFIPSnoopingFCFSwitchName | read-only | current | The switch name of the FCF. |
| 1.3.6.1.4.1.2011.10.2.120.1.1.6.1.5 | Columnh3cFCoEFIPSnoopingFCFFabricName | read-only | current | The fabric name of the FCF. |
| 1.3.6.1.4.1.2011.10.2.120.1.1.6.1.6 | Columnh3cFCoEFIPSnoopingFCFENodeCount | read-only | current | The total number of ENodes that log in through this Ethernet port. |
| 1.3.6.1.4.1.2011.10.2.120.1.1.7 | Tableh3cFCoEFIPSnoopingENodeTable | not-accessible | current | A table contains the ENode information on the local device. |
| 1.3.6.1.4.1.2011.10.2.120.1.1.7.1 | Rowh3cFCoEFIPSnoopingENodeEntry | not-accessible | current | Each entry contains information about an ENode for a VLAN. |
| 1.3.6.1.4.1.2011.10.2.120.1.1.7.1.1 | Columnh3cFCoEFIPSnoopingENodeVLANIndex | not-accessible | current | This object identifies the VLAN-ID whose FIP Snooping function gets ready on the ENode. |
| 1.3.6.1.4.1.2011.10.2.120.1.1.7.1.2 | Columnh3cFCoEFIPSnoopingENodeIfIndex | not-accessible | current | This index uniquely identifies an Ethernet interface that connects to the ENode. |
| 1.3.6.1.4.1.2011.10.2.120.1.1.7.1.3 | Columnh3cFCoEFIPSnoopingENodeMAC | not-accessible | current | The MAC address of the ENode. |
| 1.3.6.1.4.1.2011.10.2.120.1.1.7.1.4 | Columnh3cFCoEFIPSnoopingENodeName | read-only | current | The node name of the ENode. |
| 1.3.6.1.4.1.2011.10.2.120.1.1.8 | Tableh3cFCoEFIPSnoopingVNTable | not-accessible | current | A table contains the virtual N_Port information on the local device. |
| 1.3.6.1.4.1.2011.10.2.120.1.1.8.1 | Rowh3cFCoEFIPSnoopingVNEntry | not-accessible | current | Each entry contains information about a virtual N_Port. |
| 1.3.6.1.4.1.2011.10.2.120.1.1.8.1.1 | Columnh3cFCoEFIPSnoopingVNVLANIndex | not-accessible | current | This object identifies the VLAN-ID through which a virtual N_Port logs in to the FCF. |
| 1.3.6.1.4.1.2011.10.2.120.1.1.8.1.2 | Columnh3cFCoEFIPSnoopingVNENodeIfIndex | not-accessible | current | This index uniquely identifies an Ethernet interface that connects to the ENode. |
| 1.3.6.1.4.1.2011.10.2.120.1.1.8.1.3 | Columnh3cFCoEFIPSnoopingVNENodeMAC | not-accessible | current | The MAC address of the ENode. |
| 1.3.6.1.4.1.2011.10.2.120.1.1.8.1.4 | Columnh3cFCoEFIPSnoopingVNFCFMAC | not-accessible | current | The MAC address of the FCF. |
| 1.3.6.1.4.1.2011.10.2.120.1.1.8.1.5 | Columnh3cFCoEFIPSnoopingVNMAC | not-accessible | current | The MAC address of the virtual N_Port. |
| 1.3.6.1.4.1.2011.10.2.120.1.1.8.1.6 | Columnh3cFCoEFIPSnoopingVNName | read-only | current | The port name of the virtual N_Port. |
| 1.3.6.1.4.1.2011.10.2.120.1.1.8.1.7 | Columnh3cFCoEFIPSnoopingVNFCFIfIndex | read-only | current | This index uniquely identifies an Ethernet interface that connects to the FCF. |
| 1.3.6.1.4.1.2011.10.2.120.1.1.9 | Tableh3cFCoEFIPSnoopingIfCfgTable | not-accessible | current | A table is used to configure FIP Snooping working mode of the Ethernet interface on the localdevice. |
| 1.3.6.1.4.1.2011.10.2.120.1.1.9.1 | Rowh3cFCoEFIPSnoopingIfCfgEntry | not-accessible | current | Each entry contains information about FIP Snooping working mode of the Ethernet interface. |
| 1.3.6.1.4.1.2011.10.2.120.1.1.9.1.1 | Columnh3cFCoEFIPSnoopingIfCfgIfIndex | not-accessible | current | This index uniquely identifies an Ethernet interface. |
| 1.3.6.1.4.1.2011.10.2.120.1.1.9.1.2 | Columnh3cFCoEFIPSnoopingIfCfgPortType | read-write | current | The FIP Snooping working mode of an Ethernet interface on the local device. The FCF mode means that the Ethernet interface must connect to an FCF. The ENode mo… |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| H3cFCoEVfcBindType | INTEGER { interfaceIndex(1), macAddress(2) } | current | Defines the different methods to identify (or bind to) - the ENode associated with a particular VF_Port VFC - the remote-FCF associated with a particular VE_Port VFC interfaceIndex(1) - This type is used only when an EN… |