H3C-HPEOC-MIB
40 objects
The objects in this MIB module are used to manage and display current configuration of Ethernet Over Cable Network (EOC) which based on HomePlug(HP) AV Specification.
Imported Objects
| HUAWEI-3COM-OID-MIB | h3cCommon |
| IF-MIB | ifIndex |
| SNMPv2-SMI | Counter64 Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString MacAddress TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2011.10.2.84 | Identityh3cHPEOC | The objects in this MIB module are used to manage and display current configuration of Ethernet Over Cable Network (EOC) which based on HomePlug(HP) AV Specifi… | ||
| 1.3.6.1.4.1.2011.10.2.84.1 | Nodeh3cHPEOCSystem | |||
| 1.3.6.1.4.1.2011.10.2.84.1.1 | Scalarh3cHPEOCCltVlanType | read-write | current | Control EOC CLT's VLAN type, ieee8021q : 802.1q VLAN mode, portbased : portbased VLAN mode. |
| 1.3.6.1.4.1.2011.10.2.84.1.2 | Tableh3cHPEOCCltVlanManTable | not-accessible | current | This table implements the management of CLT(Coax Line Terminal) VLAN. |
| 1.3.6.1.4.1.2011.10.2.84.1.2.1 | Rowh3cHPEOCCltVlanManEntry | not-accessible | current | The entry of the table h3cHPEOCCltVlanManTable. |
| 1.3.6.1.4.1.2011.10.2.84.1.2.1.1 | Columnh3cHPEOCCltEthPortType | read-write | current | Control CLT ethernet ports' type, normal : port which used for normal translation, debug : port which used for debug. |
| 1.3.6.1.4.1.2011.10.2.84.1.3 | Tableh3cHPEOCCltSysManTable | not-accessible | current | This table implements the management of CLT(Coax Line Terminal). |
| 1.3.6.1.4.1.2011.10.2.84.1.3.1 | Rowh3cHPEOCCltSysManEntry | not-accessible | current | The entry of the table h3cHPEOCCltSysManTable. |
| 1.3.6.1.4.1.2011.10.2.84.1.3.1.1 | Columnh3cHPEOCCltDescr | read-write | current | Set the description of CLT. |
| 1.3.6.1.4.1.2011.10.2.84.1.3.1.2 | Columnh3cHPEOCCltFwVersion | read-only | current | EOC firmware version. If the object length is zero, it means the version is unknown. |
| 1.3.6.1.4.1.2011.10.2.84.1.4 | Tableh3cHPEOCCnuSysManTable | not-accessible | current | This table implements the management of CNUs. |
| 1.3.6.1.4.1.2011.10.2.84.1.4.1 | Rowh3cHPEOCCnuSysManEntry | not-accessible | current | The entry of the table h3cHPEOCCnuSysManTable. |
| 1.3.6.1.4.1.2011.10.2.84.1.4.1.1 | Columnh3cHPEOCCnuBcastControl | read-write | current | Broadcast storm suppression status. true(1) - Broadcast storm suppression enable. false(2) - Broadcast storm suppression disable. |
| 1.3.6.1.4.1.2011.10.2.84.1.4.1.2 | Columnh3cHPEOCCnuAnonymStatus | read-only | current | Anonymity status. true(1) - the user which uses the CNU is anonymous. false(2) - the user which uses the CNU has an account. |
| 1.3.6.1.4.1.2011.10.2.84.1.4.1.3 | Columnh3cHPEOCCnuMacLimit | read-write | current | Configure the max number of MAC address entries which can access through the CNU, it ranges from 1 to 8. Otherwise, If configure 0, the CNU won't limit the MAC… |
| 1.3.6.1.4.1.2011.10.2.84.1.5 | Scalarh3cHPEOCCltAutoUpgrade | read-write | current | Auto upgrade Status. true(1) - The firmware of the CNU will be auto changed by CLT. false(2)- The firmware of the CNU will not be auto changed. |
| 1.3.6.1.4.1.2011.10.2.84.1.6 | Scalarh3cHPEOCOnLineCnuNumber | read-only | current | The total number of the online CNU(s). |
| 1.3.6.1.4.1.2011.10.2.84.1.7 | Scalarh3cHPEOCCpuMacAddress | read-only | current | EOC CPU's MAC address. |
| 1.3.6.1.4.1.2011.10.2.84.1.8 | Scalarh3cHPEOCOffLineCnuNumber | read-only | current | The total number of the offline CNU(s). |
| 1.3.6.1.4.1.2011.10.2.84.1.9 | Scalarh3cHPEOCDownLoadCNUFWResult | accessible-for-notify | current | Download CNU firmware result. |
| 1.3.6.1.4.1.2011.10.2.84.1.10 | Scalarh3cHPEOCCltAutoUpgradeType | read-write | current | Type of auto upgrade status. It depends on h3cHPEOCCltAutoUpgrade status. flash - The CLT auto upgrade the firmware inside its flash to the CNUs. ftp - First d… |
| 1.3.6.1.4.1.2011.10.2.84.1.11 | Nodeh3cHPEOCAutoUpObjects | |||
| 1.3.6.1.4.1.2011.10.2.84.1.11.1 | Scalarh3cHPEOCServerAddress | read-write | current | The address of remote host acting as server for operation. The default value is 0.0.0.0 |
| 1.3.6.1.4.1.2011.10.2.84.1.11.2 | Scalarh3cHPEOCServerUser | read-write | current | When using ftp to transfer files, the user name must be specified through this node. It contains 1 to 30 characters. |
| 1.3.6.1.4.1.2011.10.2.84.1.11.3 | Scalarh3cHPEOCServerPassword | read-write | current | Remote user password for copying via ftp protocol. Optionally, this object may be ignored for protocols other than ftp. It contains 1 to 31 characters. |
| 1.3.6.1.4.1.2011.10.2.84.2 | Nodeh3cHPEOCCableInfo | |||
| 1.3.6.1.4.1.2011.10.2.84.2.1 | Tableh3cHPEOCCableInfoTable | not-accessible | current | This table defines the primary parameters of the cable information. |
| 1.3.6.1.4.1.2011.10.2.84.2.1.1 | Rowh3cHPEOCCableInfoEntry | not-accessible | current | The entry of the table h3cHPEOCCableInfoTable. |
| 1.3.6.1.4.1.2011.10.2.84.2.1.1.1 | Columnh3cHPEOCFECErrors | read-only | current | The cable port's FEC bits errors ratio. FEC means the payload Forward Error Correction. It's a technology of controlling errors. Packets in transmission is che… |
| 1.3.6.1.4.1.2011.10.2.84.2.1.1.2 | Columnh3cHPEOCAvgBitsPerCarrier | read-only | current | The cable port's average bits per carrier. |
| 1.3.6.1.4.1.2011.10.2.84.2.1.1.3 | Columnh3cHPEOCAvgSNRPerCarrier | read-only | current | The cable port's signal noise ratio(SNR) bits per carrier. |
| 1.3.6.1.4.1.2011.10.2.84.2.1.1.4 | Columnh3cHPEOCAvgInPBCRCErrors | read-only | current | The input PB CRC errors on average. |
| 1.3.6.1.4.1.2011.10.2.84.2.1.1.5 | Columnh3cHPEOCInTotalPkts | read-only | current | The total number of packets(including bad packets) received on this interface. |
| 1.3.6.1.4.1.2011.10.2.84.2.1.1.6 | Columnh3cHPEOCAvgOutPower | read-only | current | The cable port's power sent on average, the unit is db. |
| 1.3.6.1.4.1.2011.10.2.84.2.1.1.7 | Columnh3cHPEOCAvgOutPBCRCErrors | read-only | current | The cable port's physical block(PB) cyclic redundancy check(CRC) errors sent on average. |
| 1.3.6.1.4.1.2011.10.2.84.2.1.1.8 | Columnh3cHPEOCOutTotalPkts | read-only | current | The total count of the packets(including bad packets) sent on this interface. |
| 1.3.6.1.4.1.2011.10.2.84.2.2 | Tableh3cHPEOCBitPerSymbolTable | not-accessible | current | This table defines the bits per symbol parameters of the cable line. |
| 1.3.6.1.4.1.2011.10.2.84.2.2.1 | Rowh3cHPEOCBitPerSymbolEntry | not-accessible | current | The entry of the table h3cHPEOCBitPerSymbolTable. |
| 1.3.6.1.4.1.2011.10.2.84.2.2.1.1 | Columnh3cHPEOCBitPerSymbolIndex | not-accessible | current | The index of the h3cHPEOCBitPerSymbolTable. |
| 1.3.6.1.4.1.2011.10.2.84.2.2.1.2 | Columnh3cHPEOCBitPerSymbol | read-only | current | h3cHPEOCBitPerSymbol returns all the bits per symbol on the fixed frequency. Each 4 bits stand for one value, all the values picking-up will make up a cable bi… |