H3C-IF-EXT-MIB
190 objects
This MIB is an extension of interface MIBs such as IF-MIB. This MIB is applicable to routers, switches, and other products. Some objects in this MIB may be used only for some specific products, so users should refer to the related documents to acquire more detailed information.
Imported Objects
| HCNUM-TC | CounterBasedGauge64 |
| HUAWEI-3COM-OID-MIB | h3cCommon |
| IF-MIB | ifDescr ifIndex InterfaceIndex |
| SNMPv2-SMI | Counter64 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks Unsigned32 |
| SNMPv2-TC | DisplayString RowStatus TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2011.10.2.40 | Identityh3cIfExt | This MIB is an extension of interface MIBs such as IF-MIB. This MIB is applicable to routers, switches, and other products. Some objects in this MIB may be use… | ||
| 1.3.6.1.4.1.2011.10.2.40.1 | Nodeh3cIfExtScalarGroup | |||
| 1.3.6.1.4.1.2011.10.2.40.1.1 | Scalarh3cIfStatGlobalFlowInterval | read-write | current | Sampling interval for in/out flow of all interfaces. Setting zero indicates closing the statistic function. |
| 1.3.6.1.4.1.2011.10.2.40.1.2 | Scalarh3cIfShutDownInterval | read-write | current | Set the port status detection timer. The device starts a port status detection timer when a port is shut down by a protocol. Once the timer expires, the device… |
| 1.3.6.1.4.1.2011.10.2.40.1.3 | Scalarh3cIfThroughputInKbps | read-only | current | Actual incoming throughput of the device in kbps. |
| 1.3.6.1.4.1.2011.10.2.40.1.4 | Scalarh3cIfThroughputOutKbps | read-only | current | Actual outgoing throughput of the device in kbps. |
| 1.3.6.1.4.1.2011.10.2.40.2 | Nodeh3cIfExtGroup | |||
| 1.3.6.1.4.1.2011.10.2.40.2.1 | Nodeh3cIfStat | |||
| 1.3.6.1.4.1.2011.10.2.40.2.1.1 | Nodeh3cIfStatScalarGroup | |||
| 1.3.6.1.4.1.2011.10.2.40.2.1.2 | Nodeh3cIfStatTable | |||
| 1.3.6.1.4.1.2011.10.2.40.2.1.2.1 | Tableh3cIfFlowStatTable | not-accessible | current | This table contains objects to get statistic information of interfaces on a device. |
| 1.3.6.1.4.1.2011.10.2.40.2.1.2.1.1 | Rowh3cIfStatEntry | not-accessible | current | Entry items |
| 1.3.6.1.4.1.2011.10.2.40.2.1.2.1.1.1 | Columnh3cIfStatFlowInterval | read-write | current | Sampling interval for in/out flow of interface. Setting zero indicates closing this statistic function and objects in this table should return 0. |
| 1.3.6.1.4.1.2011.10.2.40.2.1.2.1.1.2 | Columnh3cIfStatFlowInBits | read-only | current | In bits in the specified interval. |
| 1.3.6.1.4.1.2011.10.2.40.2.1.2.1.1.3 | Columnh3cIfStatFlowOutBits | read-only | current | Out bits in the specified interval. |
| 1.3.6.1.4.1.2011.10.2.40.2.1.2.1.1.4 | Columnh3cIfStatFlowInPkts | read-only | current | In packets in the specified interval. |
| 1.3.6.1.4.1.2011.10.2.40.2.1.2.1.1.5 | Columnh3cIfStatFlowOutPkts | read-only | current | Out packets in the specified interval. |
| 1.3.6.1.4.1.2011.10.2.40.2.1.2.1.1.6 | Columnh3cIfStatFlowInBytes | read-only | current | In bytes in the specified interval. |
| 1.3.6.1.4.1.2011.10.2.40.2.1.2.1.1.7 | Columnh3cIfStatFlowOutBytes | read-only | current | Out bytes in the specified interval. |
| 1.3.6.1.4.1.2011.10.2.40.2.1.2.2 | Tableh3cIfSpeedStatTable | not-accessible | current | This table contains objects to get average speed information in the specified interval for interfaces on a device. |
| 1.3.6.1.4.1.2011.10.2.40.2.1.2.2.1 | Rowh3cIfSpeedStatEntry | not-accessible | current | Entry items |
| 1.3.6.1.4.1.2011.10.2.40.2.1.2.2.1.1 | Columnh3cIfSpeedStatInterval | read-write | current | Sampling interval for in/out flow of interface. Setting zero indicates closing this statistic function and objects in this table should return 0. |
| 1.3.6.1.4.1.2011.10.2.40.2.1.2.2.1.2 | Columnh3cIfSpeedStatInPkts | read-only | current | Average of input packets per second in the specified interval by h3cIfSpeedStatInterval. |
| 1.3.6.1.4.1.2011.10.2.40.2.1.2.2.1.3 | Columnh3cIfSpeedStatOutPkts | read-only | current | Average of output packets per second in the specified interval by h3cIfSpeedStatInterval. |
| 1.3.6.1.4.1.2011.10.2.40.2.1.2.2.1.4 | Columnh3cIfSpeedStatInBytes | read-only | current | Average of input bytes per second in the specified interval by h3cIfSpeedStatInterval. |
| 1.3.6.1.4.1.2011.10.2.40.2.1.2.2.1.5 | Columnh3cIfSpeedStatOutBytes | read-only | current | Average of output bytes per second in the specified interval by h3cIfSpeedStatInterval. |
| 1.3.6.1.4.1.2011.10.2.40.2.1.2.3 | Tableh3cIfHCFlowStatTable | not-accessible | current | This table contains objects to get statistic information of interfaces on a device. |
| 1.3.6.1.4.1.2011.10.2.40.2.1.2.3.1 | Rowh3cIfHCFlowStatEntry | not-accessible | current | Entry items |
| 1.3.6.1.4.1.2011.10.2.40.2.1.2.3.1.1 | Columnh3cIfStatFlowHCInBits | read-only | current | In bits in the specified interval. This object is a 64-bit version of h3cIfStatFlowInBits. |
| 1.3.6.1.4.1.2011.10.2.40.2.1.2.3.1.2 | Columnh3cIfStatFlowHCOutBits | read-only | current | Out bits in the specified interval. This object is a 64-bit version of h3cIfStatFlowOutBits. |
| 1.3.6.1.4.1.2011.10.2.40.2.1.2.3.1.3 | Columnh3cIfStatFlowHCInPkts | read-only | current | In packets in the specified interval. This object is a 64-bit version of h3cIfStatFlowInPkts. |
| 1.3.6.1.4.1.2011.10.2.40.2.1.2.3.1.4 | Columnh3cIfStatFlowHCOutPkts | read-only | current | Out packets in the specified interval. This object is a 64-bit version of h3cIfStatFlowOutPkts. |
| 1.3.6.1.4.1.2011.10.2.40.2.1.2.3.1.5 | Columnh3cIfStatFlowHCInBytes | read-only | current | In bytes in the specified interval. This object is a 64-bit version of h3cIfStatFlowInBytes. |
| 1.3.6.1.4.1.2011.10.2.40.2.1.2.3.1.6 | Columnh3cIfStatFlowHCOutBytes | read-only | current | Out bytes in the specified interval. This object is a 64-bit version of h3cIfStatFlowOutBytes. |
| 1.3.6.1.4.1.2011.10.2.40.2.1.2.4 | Tableh3cIfHCSpeedStatTable | not-accessible | current | This table contains objects to get average speed information in the specified interval for interfaces on a device. This table is a 64-bit version of h3cIfSpeed… |
| 1.3.6.1.4.1.2011.10.2.40.2.1.2.4.1 | Rowh3cIfHCSpeedStatEntry | not-accessible | current | Entry items |
| 1.3.6.1.4.1.2011.10.2.40.2.1.2.4.1.1 | Columnh3cIfSpeedStatHCInPkts | read-only | current | Average of input packets per second in the specified interval by h3cIfSpeedStatInterval. This object is a 64-bit version of h3cIfSpeedStatInPkts. |
| 1.3.6.1.4.1.2011.10.2.40.2.1.2.4.1.2 | Columnh3cIfSpeedStatHCOutPkts | read-only | current | Average of output packets per second in the specified interval by h3cIfSpeedStatInterval. This object is a 64-bit version of h3cIfSpeedStatOutPkts. |
| 1.3.6.1.4.1.2011.10.2.40.2.1.2.4.1.3 | Columnh3cIfSpeedStatHCInBytes | read-only | current | Average of input bytes per second in the specified interval by h3cIfSpeedStatInterval. This object is a 64-bit version of h3cIfSpeedStatInBytes. |
| 1.3.6.1.4.1.2011.10.2.40.2.1.2.4.1.4 | Columnh3cIfSpeedStatHCOutBytes | read-only | current | Average of output bytes per second in the specified interval by h3cIfSpeedStatInterval. This object is a 64-bit version of h3cIfSpeedStatOutBytes. |
| 1.3.6.1.4.1.2011.10.2.40.2.2 | Nodeh3cIfControl | |||
| 1.3.6.1.4.1.2011.10.2.40.2.2.1 | Tableh3cRTParentIfTable | not-accessible | current | This table contains all interfaces that can create subinterfaces. |
| 1.3.6.1.4.1.2011.10.2.40.2.2.1.1 | Rowh3cRTParentIfEntry | not-accessible | current | This entry describes an interface that can create subinterfaces. |
| 1.3.6.1.4.1.2011.10.2.40.2.2.1.1.1 | Columnh3cRTParentIfIndex | not-accessible | current | The index of the interface that can create subinterfaces. The value is the same as the ifIndex value for this interface. |
| 1.3.6.1.4.1.2011.10.2.40.2.2.1.1.2 | Columnh3cRTMinSubIfOrdinal | read-only | current | The min ordinal of the subinterface. |
| 1.3.6.1.4.1.2011.10.2.40.2.2.1.1.3 | Columnh3cRTMaxSubIfOrdinal | read-only | current | The max ordinal of the subinterface. |
| 1.3.6.1.4.1.2011.10.2.40.2.2.2 | Tableh3cRTSubIfTable | not-accessible | current | This table contains objects to create or delete subinterfaces. To create a subinterface, a valid parent interface must be specified by h3cRTSubIfParentIfIndex,… |
| 1.3.6.1.4.1.2011.10.2.40.2.2.2.1 | Rowh3cRTSubIfEntry | not-accessible | current | The h3cRTSubIfTable entry items |
| 1.3.6.1.4.1.2011.10.2.40.2.2.2.1.1 | Columnh3cRTSubIfParentIfIndex | not-accessible | current | The parent interface index. The value should be the same as h3cRTParentIfIndex. |
| 1.3.6.1.4.1.2011.10.2.40.2.2.2.1.2 | Columnh3cRTSubIfOrdinal | not-accessible | current | The ordinal of the subinterface. It should between h3cRTMinSubIfOrdinal and h3cRTMaxSubIfOrdinal of the parent interface. |
| 1.3.6.1.4.1.2011.10.2.40.2.2.2.1.3 | Columnh3cRTSubIfSubIfIndex | read-only | current | The ifIndex value of the subinterface |
| 1.3.6.1.4.1.2011.10.2.40.2.2.2.1.4 | Columnh3cRTSubIfSubIfDesc | read-only | current | The name of the interface |
| 1.3.6.1.4.1.2011.10.2.40.2.2.2.1.5 | Columnh3cRTSubIfRowStatus | read-create | current | Operation status. |
| 1.3.6.1.4.1.2011.10.2.40.2.2.3 | Tableh3cIfLinkModeTable | not-accessible | current | This table contains objects to get or set the link mode of an interface. According to the layer at which the device processes received data packets, Ethernet i… |
| 1.3.6.1.4.1.2011.10.2.40.2.2.3.1 | Rowh3cIfLinkModeEntry | not-accessible | current | The interface link mode table entry |
| 1.3.6.1.4.1.2011.10.2.40.2.2.3.1.1 | Columnh3cIfLinkModeIndex | not-accessible | current | The value is the same as ifIndex. |
| 1.3.6.1.4.1.2011.10.2.40.2.2.3.1.2 | Columnh3cIfLinkMode | read-write | current | The current link mode of the interface. If h3cIfLinkModeSwitchSupport is true, writing to the object can change the link mode of the interface. |
| 1.3.6.1.4.1.2011.10.2.40.2.2.3.1.3 | Columnh3cIfLinkModeSwitchSupport | read-only | current | Whether the interface supports link mode switching. If this object is true, the interface can operate in either bridge mode or route mode. Otherwise the interf… |
| 1.3.6.1.4.1.2011.10.2.40.2.2.4 | Tableh3cIfPortTypeTable | not-accessible | current | This table contains objects to get or set the port type of an interface. |
| 1.3.6.1.4.1.2011.10.2.40.2.2.4.1 | Rowh3cIfPortTypeEntry | not-accessible | current | The interface port type table entry. |
| 1.3.6.1.4.1.2011.10.2.40.2.2.4.1.1 | Columnh3cIfPortTypeIndex | not-accessible | current | The value is the same as ifIndex. |
| 1.3.6.1.4.1.2011.10.2.40.2.2.4.1.2 | Columnh3cIfPortType | read-write | current | The current port type of the interface. Don't set the port type to other for an interface. |
| 1.3.6.1.4.1.2011.10.2.40.2.2.5 | Tableh3cIfPfcDot1pTable | not-accessible | current | This table can set the inbound and outbound rate thresholds for the specified dot1p values. |
| 1.3.6.1.4.1.2011.10.2.40.2.2.5.1 | Rowh3cIfPfcDot1pEntry | not-accessible | current | Entry items |
| 1.3.6.1.4.1.2011.10.2.40.2.2.5.1.1 | Columnh3cIfPfcDot1pValue | read-only | current | The PFC dot1p value list. |
| 1.3.6.1.4.1.2011.10.2.40.2.2.5.1.2 | Columnh3cIfPfcDot1pInPps | read-only | current | The current PFC dot1p for the inbound rate. |
| 1.3.6.1.4.1.2011.10.2.40.2.2.5.1.3 | Columnh3cIfPfcDot1pOutPps | read-only | current | The current PFC dot1p for the outbound rate. |
| 1.3.6.1.4.1.2011.10.2.40.2.2.5.1.4 | Columnh3cIfPfcDot1pInPpsThreshold | read-write | current | The threshold for the inbound rate. If the h3cIfPfcDot1pInPpsThreshold is set to 0, no h3cIfPfcInRising will be generated. |
| 1.3.6.1.4.1.2011.10.2.40.2.2.5.1.5 | Columnh3cIfPfcDot1pOutPpsThreshold | read-write | current | The threshold for the outbound rate. If the h3cIfPfcDot1pOutPpsThreshold is set to 0, no h3cIfPfcOutRising will be generated. |
| 1.3.6.1.4.1.2011.10.2.40.2.3 | Nodeh3cIfInterfaces | |||
| 1.3.6.1.4.1.2011.10.2.40.2.3.1 | Scalarh3cIfPhysicalNumber | read-only | current | Represents the number of physical interfaces on the device. |
| 1.3.6.1.4.1.2011.10.2.40.2.3.2 | Tableh3cIfTable | not-accessible | current | A list of interface entries. The number of entries is given by the value of IfNumber. |
| 1.3.6.1.4.1.2011.10.2.40.2.3.2.1 | Rowh3cIfEntry | not-accessible | current | An entry containing management information applicable to a particular interface. |
| 1.3.6.1.4.1.2011.10.2.40.2.3.2.1.1 | Columnh3cIfUpDownTimes | read-only | current | The interface's up/down times, since the device was initialized. |
| 1.3.6.1.4.1.2011.10.2.40.2.3.2.1.2 | Columnh3cIfMtu | read-write | current | The size of the largest datagram that can be sent or received on the interface, specified in octets. For interfaces that are used for transmitting network data… |
| 1.3.6.1.4.1.2011.10.2.40.2.3.2.1.3 | Columnh3cIfBandwidthRate | read-only | current | The rate of the bandwidth for an interface. |
| 1.3.6.1.4.1.2011.10.2.40.2.3.2.1.4 | Columnh3cIfDiscardPktRate | read-only | current | The rate of the discarded packets for an interface. |
| 1.3.6.1.4.1.2011.10.2.40.2.3.2.1.5 | Columnh3cIfStatusKeepTime | read-only | current | The time since the interface entered its current operational state. |
| 1.3.6.1.4.1.2011.10.2.40.2.3.2.1.6 | Columnh3cIfInNUcastPkts | read-only | current | The number of non-unicast (i.e., subnetwork- broadcast or subnetwork-multicast) packets delivered to a higher-layer protocol. |
| 1.3.6.1.4.1.2011.10.2.40.2.3.2.1.7 | Columnh3cIfOutNUcastPkts | read-only | current | The total number of packets that higher-level protocols requested be transmitted to a non- unicast (i.e., a subnetwork-broadcast or subnetwork-multicast) addre… |
| 1.3.6.1.4.1.2011.10.2.40.2.3.2.1.8 | Columnh3cIfIsPoe | read-only | current | Whether the interface supports PoE. |
| 1.3.6.1.4.1.2011.10.2.40.2.3.2.1.9 | Columnh3cIfOperStatus | read-only | current | Current status of the interface. In testing state, no operational packets can be forwarded. If ifAdminStatus is down, h3cIfOperStatus should be admindown. If i… |
| 1.3.6.1.4.1.2011.10.2.40.2.3.2.1.10 | Columnh3cIfDownTimes | read-only | current | Number of times the interface went down, since the device was initialized. |
| 1.3.6.1.4.1.2011.10.2.40.2.3.2.1.11 | Columnh3cIfPfcStatus | read-write | current | Pfc (Priority-based Flow Control) status. Forcibly enable Pfc by enable(1). Disable Pfc by disable(2). Set Pfc to auto mode by auto(3). In auto mode, the local… |
| 1.3.6.1.4.1.2011.10.2.40.2.3.2.1.12 | Columnh3cIfPfcDot1pNoDrop | read-write | current | Pfc (Priority-based Flow Control) dot1q list, bit 0 through bit 7 corresponding to priority 0 through priority 7. See h3cIfPfcStatus. |
| 1.3.6.1.4.1.2011.10.2.40.2.3.2.1.13 | Columnh3cIfDescription | read-write | current | This object is also an 'alias' name for the interface specified by a network manager, like the object of ifAlias. However, the size of this object is larger th… |
| 1.3.6.1.4.1.2011.10.2.40.2.3.2.1.14 | Columnh3cIfFwdErrDiscards | read-only | current | The number of packets that were discarded when being forwarded. |
| 1.3.6.1.4.1.2011.10.2.40.2.3.3 | Tableh3cIfUsingTable | not-accessible | current | A table containing management information applicable to splitting interfaces. To improve port density, reduce costs, and improve network flexibility, a high-ba… |
| 1.3.6.1.4.1.2011.10.2.40.2.3.3.1 | Rowh3cIfUsingEntry | not-accessible | current | An entry of h3cIfUsingTable. |
| 1.3.6.1.4.1.2011.10.2.40.2.3.3.1.1 | Columnh3cIfUsingIndex | not-accessible | current | Index of an interface that can be split into multiple low-bandwidth breakout interfaces or be restored to a high-bandwidth interface. |
| 1.3.6.1.4.1.2011.10.2.40.2.3.3.1.2 | Columnh3cIfUsingSupportType | read-only | current | This object specifies the port type which can be split into or restored to. From lowest bit, each bit corresponds to a port type ('10GE', '20GE', '40GE', '100G… |
| 1.3.6.1.4.1.2011.10.2.40.2.3.3.1.3 | Columnh3cIfUsingType | read-write | current | This object specifies the port type that can be split into or restored to. After this object is set to a non-zero value, the operation returns success in the f… |
| 1.3.6.1.4.1.2011.10.2.40.2.3.3.1.4 | Columnh3cIfUsingStatus | read-only | current | After object h3cIfUsingType is set to a non-zero value, the value for this object is needReboot(1) until you reboot the line card (for distributed devices) or … |
| 1.3.6.1.4.1.2011.10.2.40.3 | Nodeh3cIfExtTrap | |||
| 1.3.6.1.4.1.2011.10.2.40.3.0 | Nodeh3cIfExtTrapPrex | |||
| 1.3.6.1.4.1.2011.10.2.40.3.0.1 | Notificationh3cIfBandwidthUsageHigh | current | The notification is generated when the rate of the bandwidth for the interface exceeds the upper limit. | |
| 1.3.6.1.4.1.2011.10.2.40.3.0.2 | Notificationh3cIfDiscardPktRateHigh | current | The notification is generated when the rate of the discarded packets for the interface exceeds the upper limit. | |
| 1.3.6.1.4.1.2011.10.2.40.3.0.3 | Notificationh3cIfDampeningSuppressed | current | The notification is generated when the interface is suppressed via dampening. | |
| 1.3.6.1.4.1.2011.10.2.40.3.0.4 | Notificationh3cIfDampeningNotSuppressed | current | The notification is generated when the interface is resumed to not suppressed via dampening. | |
| 1.3.6.1.4.1.2011.10.2.40.3.0.5 | Notificationh3cIfPortUp | current | The notification is generated when physical state of the interface changes to up. | |
| 1.3.6.1.4.1.2011.10.2.40.3.0.6 | Notificationh3cIfPortDown | current | The notification is generated when physical state of the interface changes to down. | |
| 1.3.6.1.4.1.2011.10.2.40.3.0.7 | Notificationh3cIfPfcOutRising | current | The notification is generated when the outbound rate exceeds the threshold for the dot1p value. If the h3cIfPfcDot1pOutPpsThreshold is set to 0, no h3cIfPfcOut… | |
| 1.3.6.1.4.1.2011.10.2.40.3.0.8 | Notificationh3cIfPfcInRising | current | The notification is generated when the inbound rate exceeds the threshold for the dot1p value. If the h3cIfPfcDot1pInPpsThreshold is set to 0, no h3cIfPfcInRis… | |
| 1.3.6.1.4.1.2011.10.2.40.3.1 | Nodeh3cIfExtTrapObject | |||
| 1.3.6.1.4.1.2011.10.2.40.3.1.1 | Tableh3cIfExtTrapCfgTable | not-accessible | current | The trap configuration table. |
| 1.3.6.1.4.1.2011.10.2.40.3.1.1.1 | Rowh3cIfExtTrapCfgEntry | not-accessible | current | An entry for this table. |
| 1.3.6.1.4.1.2011.10.2.40.3.1.1.1.1 | Columnh3cIfBandwidthUpperLimit | read-write | current | The rate of the bandwidth upper limit for an interface. |
| 1.3.6.1.4.1.2011.10.2.40.3.1.1.1.2 | Columnh3cIfDiscardPktRateUpperLimit | read-write | current | The rate of the discarded packets upper limit for an interface. |
| 1.3.6.1.4.1.2011.10.2.40.4 | Nodeh3cIfMonScalarGroup | |||
| 1.3.6.1.4.1.2011.10.2.40.5 | Nodeh3cIfMonGroup | |||
| 1.3.6.1.4.1.2011.10.2.40.5.1 | Nodeh3cIfMonStat | |||
| 1.3.6.1.4.1.2011.10.2.40.5.1.1 | Tableh3cIfMonStatTable | not-accessible | current | This table is about some types of statistics. |
| 1.3.6.1.4.1.2011.10.2.40.5.1.1.1 | Rowh3cIfMonStatEntry | not-accessible | current | Entry items. |
| 1.3.6.1.4.1.2011.10.2.40.5.1.1.1.1 | Columnh3cIfMonInputRateStatistics | read-only | current | Statistics about the inbound bandwidth. |
| 1.3.6.1.4.1.2011.10.2.40.5.1.1.1.2 | Columnh3cIfMonOutputRateStatistics | read-only | current | Statistics about the outbound bandwidth. |
| 1.3.6.1.4.1.2011.10.2.40.5.1.1.1.3 | Columnh3cIfMonInputErrorAlarmStatistics | read-only | current | Statistics about the number of inbound error packets. |
| 1.3.6.1.4.1.2011.10.2.40.5.1.1.1.4 | Columnh3cIfMonOutputErrorAlarmStatistics | read-only | current | Statistics about the number of outbound error packets. |
| 1.3.6.1.4.1.2011.10.2.40.5.1.1.1.5 | Columnh3cIfMonSdhErrorStatistics | read-only | current | Statistics about the number of SDH error packets. |
| 1.3.6.1.4.1.2011.10.2.40.5.1.1.1.6 | Columnh3cIfMonSdhB1ErrorStatistics | read-only | current | Statistics about the number of SDH B1 error packets. |
| 1.3.6.1.4.1.2011.10.2.40.5.1.1.1.7 | Columnh3cIfMonSdhB2ErrorStatistics | read-only | current | Statistics about the number of SDH B2 error packets. |
| 1.3.6.1.4.1.2011.10.2.40.5.1.1.1.8 | Columnh3cIfMonCRCErrorStatistics | read-only | current | Statistics about the number of CRC error packets. |
| 1.3.6.1.4.1.2011.10.2.40.5.1.1.1.9 | Columnh3cIfMonPauseFrameStatistics | read-only | current | Statistics about the number of pause frames. |
| 1.3.6.1.4.1.2011.10.2.40.5.1.1.1.10 | Columnh3cIfMonTxPauseFrameStatistics | read-only | current | Statistics about the number of Tx-pause frames. |
| 1.3.6.1.4.1.2011.10.2.40.5.2 | Nodeh3cIfMonControl | |||
| 1.3.6.1.4.1.2011.10.2.40.5.2.1 | Tableh3cIfMonThresholdTable | not-accessible | current | This table is about the upper threshold,low-er threshold, and inspection interval. |
| 1.3.6.1.4.1.2011.10.2.40.5.2.1.1 | Rowh3cIfMonThresholdEntry | not-accessible | current | Entry items. |
| 1.3.6.1.4.1.2011.10.2.40.5.2.1.1.1 | Columnh3cIfMonInputRateLowThres | read-write | current | Low threshold for the inbound bandwidth. |
| 1.3.6.1.4.1.2011.10.2.40.5.2.1.1.2 | Columnh3cIfMonInputRateHighThres | read-write | current | Upper threshold for the inbound bandwidth. |
| 1.3.6.1.4.1.2011.10.2.40.5.2.1.1.3 | Columnh3cIfMonOutputRateLowThres | read-write | current | Lower threshold for the outbound bandwidth. |
| 1.3.6.1.4.1.2011.10.2.40.5.2.1.1.4 | Columnh3cIfMonOutputRateHighThres | read-write | current | Upper threshold for the outbound bandwidth. |
| 1.3.6.1.4.1.2011.10.2.40.5.2.1.1.5 | Columnh3cIfMonInputErrorAlarmLowThres | read-write | current | Lower threshold for the number of inbound error packets. |
| 1.3.6.1.4.1.2011.10.2.40.5.2.1.1.6 | Columnh3cIfMonInputErrorAlarmHighThres | read-write | current | Upper threshold for the number of inbound error packets. |
| 1.3.6.1.4.1.2011.10.2.40.5.2.1.1.7 | Columnh3cIfMonInputErrorAlarmInterval | read-write | current | Inspection interval for the number of inbound error packets. |
| 1.3.6.1.4.1.2011.10.2.40.5.2.1.1.8 | Columnh3cIfMonOutputErrorAlarmLowThres | read-write | current | Lower threshold for the number of outbound error packets. |
| 1.3.6.1.4.1.2011.10.2.40.5.2.1.1.9 | Columnh3cIfMonOutputErrorAlarmHighThres | read-write | current | Upper threshold for the number of outbound error packets. |
| 1.3.6.1.4.1.2011.10.2.40.5.2.1.1.10 | Columnh3cIfMonOutputErrorAlarmInterval | read-write | current | Inspection interval for the number of outbound error packets. |
| 1.3.6.1.4.1.2011.10.2.40.5.2.1.1.11 | Columnh3cIfMonSdhErrorLowThres | read-write | current | Lower threshold for the number of SDH error packets. |
| 1.3.6.1.4.1.2011.10.2.40.5.2.1.1.12 | Columnh3cIfMonSdhErrorHighThres | read-write | current | Upper threshold for the number of SDH error packets. |
| 1.3.6.1.4.1.2011.10.2.40.5.2.1.1.13 | Columnh3cIfMonSdhErrorInterval | read-write | current | Inspection interval for the number of SDH error packets. |
| 1.3.6.1.4.1.2011.10.2.40.5.2.1.1.14 | Columnh3cIfMonSdhB1ErrorLowThres | read-write | current | Lower threshold for the number of SDH B1 error packets. |
| 1.3.6.1.4.1.2011.10.2.40.5.2.1.1.15 | Columnh3cIfMonSdhB1ErrorHighThres | read-write | current | Upper threshold for the number of SDH B1 error packets. |
| 1.3.6.1.4.1.2011.10.2.40.5.2.1.1.16 | Columnh3cIfMonSdhB1ErrorInterval | read-write | current | Inspection interval for the number of SDH B1 error packets. |
| 1.3.6.1.4.1.2011.10.2.40.5.2.1.1.17 | Columnh3cIfMonSdhB2ErrorLowThres | read-write | current | Lower threshold for the number of SDH B2 error packets. |
| 1.3.6.1.4.1.2011.10.2.40.5.2.1.1.18 | Columnh3cIfMonSdhB2ErrorHighThres | read-write | current | Upper threshold for the number of SDH B2 error packets. |
| 1.3.6.1.4.1.2011.10.2.40.5.2.1.1.19 | Columnh3cIfMonSdhB2ErrorInterval | read-write | current | Inspection interval for the number of SDH B2 error packets. |
| 1.3.6.1.4.1.2011.10.2.40.5.2.1.1.20 | Columnh3cIfMonCRCErrorLowThres | read-write | current | Lower threshold for the number of CRC error packets. |
| 1.3.6.1.4.1.2011.10.2.40.5.2.1.1.21 | Columnh3cIfMonCRCErrorHighThres | read-write | current | Upper threshold for the number of CRC error packets. |
| 1.3.6.1.4.1.2011.10.2.40.5.2.1.1.22 | Columnh3cIfMonCRCErrorInterval | read-write | current | Inspection interval for the number of CRC error packets. |
| 1.3.6.1.4.1.2011.10.2.40.5.2.1.1.23 | Columnh3cIfMonCRCErrType | read-write | current | Inspection type for the CRC error packets. |
| 1.3.6.1.4.1.2011.10.2.40.5.2.1.1.24 | Columnh3cIfMonPauseFrameLowThres | read-write | current | Lower threshold for the number of inbound pause frames. |
| 1.3.6.1.4.1.2011.10.2.40.5.2.1.1.25 | Columnh3cIfMonPauseFrameHighThres | read-write | current | Upper threshold for the number of inbound pause frames. |
| 1.3.6.1.4.1.2011.10.2.40.5.2.1.1.26 | Columnh3cIfMonPauseFrameInterval | read-write | current | Inspection interval for the number of inbound pause frames. |
| 1.3.6.1.4.1.2011.10.2.40.5.2.1.1.27 | Columnh3cIfMonTxPauseFrameLowThres | read-write | current | Lower threshold for the number of inbound Tx-pause frames. |
| 1.3.6.1.4.1.2011.10.2.40.5.2.1.1.28 | Columnh3cIfMonTxPauseFrameHighThres | read-write | current | Upper threshold for the number of inbound Tx-pause frames. |
| 1.3.6.1.4.1.2011.10.2.40.5.2.1.1.29 | Columnh3cIfMonTxPauseFrameInterval | read-write | current | Inspection interval for the number of inbound Tx-pause frames. |
| 1.3.6.1.4.1.2011.10.2.40.5.2.2 | Tableh3cIfMonAlarmDownEnableTable | not-accessible | current | This table can set or get whether to enable the interface down function. |
| 1.3.6.1.4.1.2011.10.2.40.5.2.2.1 | Rowh3cIfMonAlarmDownEnableEntry | not-accessible | current | Entry items |
| 1.3.6.1.4.1.2011.10.2.40.5.2.2.1.1 | Columnh3cIfMonInputRateEnableDown | read-write | current | When the inbound bandwidth exceeds the upper threshold,the physical interface goes down. |
| 1.3.6.1.4.1.2011.10.2.40.5.2.2.1.2 | Columnh3cIfMonOutputRateEnableDown | read-write | current | When the outbound bandwidth exceeds the upper threshold,the physical interface goes down. |
| 1.3.6.1.4.1.2011.10.2.40.5.2.2.1.3 | Columnh3cIfMonInputErrorAlarmEnableDown | read-write | current | When the number of inbound error packets-exceeds the upper threshold, the physical interface goes down. |
| 1.3.6.1.4.1.2011.10.2.40.5.2.2.1.4 | Columnh3cIfMonOutputErrorAlarmEnableDown | read-write | current | When the number of outbound error packets-exceeds the upper threshold, the physical interface goes down. |
| 1.3.6.1.4.1.2011.10.2.40.5.2.2.1.5 | Columnh3cIfMonSdhErrorEnableDown | read-write | current | When the number of SDH error packets-exceeds the upper threshold, the physical interface goes down. |
| 1.3.6.1.4.1.2011.10.2.40.5.2.2.1.6 | Columnh3cIfMonSdhB1ErrorEnableDown | read-write | current | When the number of SDH B1 error packets-exceeds the upper threshold, the physical interface goes down. |
| 1.3.6.1.4.1.2011.10.2.40.5.2.2.1.7 | Columnh3cIfMonSdhB2ErrorEnableDown | read-write | current | When the number of SDH B2 error packets-exceeds the upper threshold, the physical interface goes down. |
| 1.3.6.1.4.1.2011.10.2.40.5.2.2.1.8 | Columnh3cIfMonCRCErrorEnableDown | read-write | current | When the number of CRC error packets-exceeds the upper threshold, the physical interface goes down. |
| 1.3.6.1.4.1.2011.10.2.40.5.2.2.1.9 | Columnh3cIfMonPauseFrameEnableDown | read-write | current | When the number of inbound pause frames exceeds the upper threshold, the physical interface goes down. |
| 1.3.6.1.4.1.2011.10.2.40.5.2.2.1.10 | Columnh3cIfMonTxPauseFrameEnableDown | read-write | current | When the number of inbound Tx-pause frames exceeds the upper threshold, the physical interface goes down. |
| 1.3.6.1.4.1.2011.10.2.40.6 | Nodeh3cIfMonTrap | |||
| 1.3.6.1.4.1.2011.10.2.40.6.0 | Nodeh3cIfMonTrapPrex | |||
| 1.3.6.1.4.1.2011.10.2.40.6.0.1 | Notificationh3cIfMonInputRateRising | current | The notification is generated when the inbound bandwidth exceeds the upper threshold. | |
| 1.3.6.1.4.1.2011.10.2.40.6.0.2 | Notificationh3cIfMonInputRateResume | current | The notification is generated when the inbound bandwidth drops from above the upper threshold to below the lower threshold. | |
| 1.3.6.1.4.1.2011.10.2.40.6.0.3 | Notificationh3cIfMonOutputRateRising | current | The notification is generated when the outbound bandwidth exceeds the upper threshold. | |
| 1.3.6.1.4.1.2011.10.2.40.6.0.4 | Notificationh3cIfMonOutputRateResume | current | The notification is generated when the outbound bandwidth drops from above the upper threshold to below the lower threshold. | |
| 1.3.6.1.4.1.2011.10.2.40.6.0.5 | Notificationh3cIfMonInputErrorAlarmRising | current | The notification is generated when the number of inbound error packets exceeds the upper threshold within the default interval. | |
| 1.3.6.1.4.1.2011.10.2.40.6.0.6 | Notificationh3cIfMonInputErrorAlarmResume | current | The notification is generated when the number of inbound error packets drops from above the upper threshold to below the lower threshold within the default int… | |
| 1.3.6.1.4.1.2011.10.2.40.6.0.7 | Notificationh3cIfMonOutputErrorAlarmRising | current | The notification is generated when the number of outbound error packets exceeds the upper threshold within the default interval. | |
| 1.3.6.1.4.1.2011.10.2.40.6.0.8 | Notificationh3cIfMonOutputErrorAlarmResume | current | The notification is generated when the number of outbound error packets drops from above the upper threshold to below the lower threshold within the default in… | |
| 1.3.6.1.4.1.2011.10.2.40.6.0.9 | Notificationh3cIfMonSdhErrorRising | current | The notification is generated when the number of SDH error packets exceeds the upper threshold within the default interval. | |
| 1.3.6.1.4.1.2011.10.2.40.6.0.10 | Notificationh3cIfMonSdhErrorResume | current | The notification is generated when the number of SDH error packets drops from above the upper threshold to below the lower threshold within the default interva… | |
| 1.3.6.1.4.1.2011.10.2.40.6.0.11 | Notificationh3cIfMonSdhB1ErrorRising | current | The notification is generated when the number of SDH B1 error packets exceeds the upper threshold within the default interval. | |
| 1.3.6.1.4.1.2011.10.2.40.6.0.12 | Notificationh3cIfMonSdhB1ErrorResume | current | The notification is generated when the number of SDH B1 error packets drops from above the upper threshold to below the lower threshold within the default inte… | |
| 1.3.6.1.4.1.2011.10.2.40.6.0.13 | Notificationh3cIfMonSdhB2ErrorRising | current | The notification is generated when the number of SDH B2 error packets exceeds the upper threshold within the default interval. | |
| 1.3.6.1.4.1.2011.10.2.40.6.0.14 | Notificationh3cIfMonSdhB2ErrorResume | current | The notification is generated when the number of SDH B2 error packets drops from above the upper threshold to below the lower threshold within the default inte… | |
| 1.3.6.1.4.1.2011.10.2.40.6.0.15 | Notificationh3cIfMonCRCErrorRising | current | The notification is generated when the number of CRC error packets exceeds the upper threshold within the default interval. | |
| 1.3.6.1.4.1.2011.10.2.40.6.0.16 | Notificationh3cIfMonCRCErrorResume | current | The notification is generated when the number of CRC error packets drops from above the upper threshold to below the lower threshold within the default interva… | |
| 1.3.6.1.4.1.2011.10.2.40.6.0.17 | Notificationh3cIfMonPauseFrameRising | current | The notification is generated when the number of inbound pause frames exceeds the upper threshold. | |
| 1.3.6.1.4.1.2011.10.2.40.6.0.18 | Notificationh3cIfMonPauseFrameResume | current | The notification is generated when the number of inbound pause frames drops from above the upper threshold to below the lower-threshold. | |
| 1.3.6.1.4.1.2011.10.2.40.6.0.19 | Notificationh3cIfMonTxPauseFrameRising | current | The notification is generated when the number of inbound Tx-pause frames exceeds the upper threshold. | |
| 1.3.6.1.4.1.2011.10.2.40.6.0.20 | Notificationh3cIfMonTxPauseFrameResume | current | The notification is generated when the number of inbound Tx-pause frames drops from above the upper threshold to below the lower threshold. | |
| 1.3.6.1.4.1.2011.10.2.40.6.1 | Nodeh3cIfMonTrapObject |