H3C-MDC-MIB
55 objects
This MIB contains objects to manage MDC (Multitenant Device Context) operations. Such as: 1. Configure MDCs for a device and display MDCs and their status. 2. Assign CPU, storage space, and memory space resources to the MDC, and display their status. 3. Authorize the MDC to use the interface cards, and assign physical interfaces to an MDC. Default MDC: A device supporting MDCs is an MDC itself, and it is called the default MDC. From the default MDC, administrators can manage the entire physical device, create and delete non-default MDCs, and assign interfaces, CPU resources, storage space, and memory space to non-default MDCs. Non-default MDC: No MDCs can be created on a non-default MDC. Administrators of non-default MDCs can only manage and maintain their respective MDCs. A non-default MDC can use only the resources assigned to it.
Imported Objects
| ENTITY-MIB | entPhysicalIndex |
| HUAWEI-3COM-OID-MIB | h3cCommon |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString RowStatus TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2011.10.2.136 | Identityh3cMDC | This MIB contains objects to manage MDC (Multitenant Device Context) operations. Such as: 1. Configure MDCs for a device and display MDCs and their status. 2. … | ||
| 1.3.6.1.4.1.2011.10.2.136.1 | Nodeh3cMDCScalarObjects | |||
| 1.3.6.1.4.1.2011.10.2.136.1.1 | Scalarh3cMDCMaxMDCNum | read-only | current | The maximum number of MDCs which the system supported to create. |
| 1.3.6.1.4.1.2011.10.2.136.1.2 | Scalarh3cMDCCurrentMDCNum | read-only | current | The current number of MDCs which the system has created. |
| 1.3.6.1.4.1.2011.10.2.136.2 | Nodeh3cMDCTables | |||
| 1.3.6.1.4.1.2011.10.2.136.2.1 | Nodeh3cMDCControl | |||
| 1.3.6.1.4.1.2011.10.2.136.2.1.1 | Tableh3cMDCControlTable | not-accessible | current | This table is used to configure MDCs for a device and show MDC's status. |
| 1.3.6.1.4.1.2011.10.2.136.2.1.1.1 | Rowh3cMDCControlEntry | not-accessible | current | An entry of the h3cMDCControlTable, every entry is corresponding with an MDC. |
| 1.3.6.1.4.1.2011.10.2.136.2.1.1.1.1 | Columnh3cMDCIndex | accessible-for-notify | current | MDC ID is used as MDCIndex, the value range of MDC ID depends on the device model. MDCIndex cannot be modified after creation. |
| 1.3.6.1.4.1.2011.10.2.136.2.1.1.1.2 | Columnh3cMDCName | read-create | current | Specifies the MDC name, a case-sensitive string of 1 to 15 characters. The MDC name cannot be modified after creation. |
| 1.3.6.1.4.1.2011.10.2.136.2.1.1.1.3 | Columnh3cMDCAction | read-write | current | State of MDC action: start/stop. After an MDC is started, administrators of the MDC can log in to the MDC for MDC configuration and maintenance. Stopping an MD… |
| 1.3.6.1.4.1.2011.10.2.136.2.1.1.1.4 | Columnh3cMDCStatus | read-only | current | Status of MDCs. |
| 1.3.6.1.4.1.2011.10.2.136.2.1.1.1.5 | Columnh3cMDCRowStatus | read-create | current | The status of this table entry. Only support active, createAndGo and destroy. |
| 1.3.6.1.4.1.2011.10.2.136.2.2 | Nodeh3cMDCResource | |||
| 1.3.6.1.4.1.2011.10.2.136.2.2.1 | Tableh3cMDCDISKResourceTable | not-accessible | current | This table is for disk resource management: Specify a disk space percentage for an MDC and display the disk space usage. Default: All MDCs share the disk space… |
| 1.3.6.1.4.1.2011.10.2.136.2.2.1.1 | Rowh3cMDCDISKResourceEntry | not-accessible | current | An entry of the h3cMDCDISKResourceTable, every entry is corresponding to disk resource of an MDC. Note that only entPhysicalIndex values that represent physica… |
| 1.3.6.1.4.1.2011.10.2.136.2.2.1.1.1 | Columnh3cMDCDISKResourceInstance | not-accessible | current | Instance index of disk resource. Different instances for disk: Flash, CF cards. |
| 1.3.6.1.4.1.2011.10.2.136.2.2.1.1.2 | Columnh3cMDCDISKResourceInstanceName | read-only | current | Instance name of disk resource. Such as: Flash, CF cards. |
| 1.3.6.1.4.1.2011.10.2.136.2.2.1.1.3 | Columnh3cMDCDISKResourceMinLimit | read-write | current | Limit minimum (reserve resources, must be all 0). |
| 1.3.6.1.4.1.2011.10.2.136.2.2.1.1.4 | Columnh3cMDCDISKResourceMaxLimit | read-write | current | Maximum of available resources of disk. Make sure the disk space amount assigned to an MDC is greater than the disk space amount the MDC is using. Non-default … |
| 1.3.6.1.4.1.2011.10.2.136.2.2.1.1.5 | Columnh3cMDCDISKResourceReserve | read-only | current | The reserve limit resources of disk. |
| 1.3.6.1.4.1.2011.10.2.136.2.2.1.1.6 | Columnh3cMDCDISKResourceQuota | read-only | current | The total limit resources of disk according to h3cMDCDiskResourceMaxLimit. |
| 1.3.6.1.4.1.2011.10.2.136.2.2.1.1.7 | Columnh3cMDCDISKResourceUsage | read-only | current | Current usage of disk resources. |
| 1.3.6.1.4.1.2011.10.2.136.2.2.1.1.8 | Columnh3cMDCDISKResourceAvailable | read-only | current | Current available resources of disk. |
| 1.3.6.1.4.1.2011.10.2.136.2.2.2 | Tableh3cMDCMemoryResourceTable | not-accessible | current | This table is for memory resource management: Specify a memory space percentage for an MDC and display the memory space usage. Default: All MDCs share the memo… |
| 1.3.6.1.4.1.2011.10.2.136.2.2.2.1 | Rowh3cMDCMemoryResourceEntry | not-accessible | current | An entry of the h3cMDCMemoryResourceTable, every entry is corresponding with memory resource of an MDC. Note that only entPhysicalIndex values that represent p… |
| 1.3.6.1.4.1.2011.10.2.136.2.2.2.1.1 | Columnh3cMDCMemoryResourceMinLimit | read-write | current | Limit minimum(reserve resources, must be all 0). Non-default MDC cannot set. |
| 1.3.6.1.4.1.2011.10.2.136.2.2.2.1.2 | Columnh3cMDCMemoryResourceMaxLimit | read-write | current | Maximum of available resources of memory, it specifies the ratio of the memory space that an MDC can use. Make sure this amount is sufficient for the MDC to op… |
| 1.3.6.1.4.1.2011.10.2.136.2.2.2.1.3 | Columnh3cMDCMemoryResourceReserve | read-only | current | The reserve limit resources of memory. |
| 1.3.6.1.4.1.2011.10.2.136.2.2.2.1.4 | Columnh3cMDCMemoryResourceQuota | read-only | current | The total limit resources of memory. |
| 1.3.6.1.4.1.2011.10.2.136.2.2.2.1.5 | Columnh3cMDCMemoryResourceUsage | read-only | current | Current usage of memory resources. |
| 1.3.6.1.4.1.2011.10.2.136.2.2.2.1.6 | Columnh3cMDCMemoryResourceAvailable | read-only | current | Current available value of memory resources. |
| 1.3.6.1.4.1.2011.10.2.136.2.2.3 | Tableh3cMDCCPUResourceTable | not-accessible | current | This table is for CPU resource management: Specify a CPU weight for an MDC and display the CPU usage. The amount of CPU resources an MDC can use depends on the… |
| 1.3.6.1.4.1.2011.10.2.136.2.2.3.1 | Rowh3cMDCCPUResourceEntry | not-accessible | current | An entry of the h3cMDCCPUResourceTable, every entry is corresponding with CPU resources of an MDC. Note that only entPhysicalIndex values that represent physic… |
| 1.3.6.1.4.1.2011.10.2.136.2.2.3.1.1 | Columnh3cMDCCPUResourceLimit | read-write | current | CPU weight-maximum of available resources of CPU, this number specifies a CPU weight for an MDC. Non-default MDC cannot set. |
| 1.3.6.1.4.1.2011.10.2.136.2.2.3.1.2 | Columnh3cMDCCPUResourceUsage | read-only | current | the CPU usage |
| 1.3.6.1.4.1.2011.10.2.136.2.3 | Nodeh3cMDCLocation | |||
| 1.3.6.1.4.1.2011.10.2.136.2.3.1 | Tableh3cMDCLocationTable | not-accessible | current | This table is for location management: Authorize an MDC to use an interface card and query state of location. To assign physical interfaces to an MDC, administ… |
| 1.3.6.1.4.1.2011.10.2.136.2.3.1.1 | Rowh3cMDCLocationEntry | not-accessible | current | An entry of the h3cMDCLocationTable, every entry is the status whether an MDC has been Authorized to use the interface cards. Note that only entPhysicalIndex v… |
| 1.3.6.1.4.1.2011.10.2.136.2.3.1.1.1 | Columnh3cMDCLocationStatus | read-write | current | To authorize the MDC to use the interface cards, set the value of this object to 'true (1)'. To cancel the authorization, set this value to 'false (2)'. Note t… |
| 1.3.6.1.4.1.2011.10.2.136.2.4 | Nodeh3cMDCAllocate | |||
| 1.3.6.1.4.1.2011.10.2.136.2.4.1 | Tableh3cMDCGroupIfTable | not-accessible | current | This table indication of relation between interfaces and groups, which helps to realize the allocation, together with h3cMDCAllocateTable. Non-default MDC cann… |
| 1.3.6.1.4.1.2011.10.2.136.2.4.1.1 | Rowh3cMDCGroupIfEntry | not-accessible | current | An entry of the h3cMDCGroupIfTable, every entry is the relationship between interfaces and groups. Due to hardware restrictions, the interfaces on some interfa… |
| 1.3.6.1.4.1.2011.10.2.136.2.4.1.1.2 | Columnh3cMDCGroupIdentity | read-only | current | The interface group ID. There are two parts for this id depicted as follows: 31 7 0 +++++++++++++++++++++++++++++++++++++++++ + entity index + group index + + … |
| 1.3.6.1.4.1.2011.10.2.136.2.4.2 | Tableh3cMDCAllocateTable | not-accessible | current | This table is used to assigning a physical interface to an MDC. It is allowed that allocate interfaces to a non-default MDC from the default MDC, and allocate … |
| 1.3.6.1.4.1.2011.10.2.136.2.4.2.1 | Rowh3cMDCAllocateEntry | not-accessible | current | An entry of the h3cMDCAllocateTable, every entry is the status whether physical interfaces have been assigned to an MDC. |
| 1.3.6.1.4.1.2011.10.2.136.2.4.2.1.1 | Columnh3cMDCAllocateGroupIndex | not-accessible | current | The interface group ID, the same as h3cMDCGroupIdentity. There are two parts for this id. depicted as follows: 31 7 0 +++++++++++++++++++++++++++++++++++++++++… |
| 1.3.6.1.4.1.2011.10.2.136.2.4.2.1.2 | Columnh3cMDCAllocateGroupDescription | read-only | current | Interfaces list Such as: GigabitEthernet4/5/0/1 to GigabitEthernet4/5/0/24, GigabitEthernet4/5/0/48 |
| 1.3.6.1.4.1.2011.10.2.136.2.4.2.1.3 | Columnh3cMDCAllocateMDCId | read-write | current | MDC ID is used as h3cMDCAllocateMDCId. Default MDC: It is allowed that allocate interfaces to non-default MDC from the default MDC, and allocate interfaces bac… |
| 1.3.6.1.4.1.2011.10.2.136.3 | Nodeh3cMDCNotification | |||
| 1.3.6.1.4.1.2011.10.2.136.3.0 | Nodeh3cMDCNotificationObjects | |||
| 1.3.6.1.4.1.2011.10.2.136.3.0.1 | Notificationh3cMDCStateChangeToActive | current | The h3cMDCStateChangeToActive trap indicates that the MDC status has changed to active. | |
| 1.3.6.1.4.1.2011.10.2.136.3.0.2 | Notificationh3cMDCStateChangeToInactive | current | The h3cMDCStateChangeToInactive trap indicates that the MDC status has changed to inactive. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| H3cMdcActionValue | INTEGER { start(1), stop(2) } | current | start: start the MDC stop: stop the MDC |
| H3cMdcRunStatus | INTEGER { inactive(1), starting(2), active(3), stopping(4), updating(5) } | current | Status of the MDC: inactive: The MDC is stopped or not started yet. starting: The device is executing the mdc start command to start the MDC. active: The MDC is operating properly. stopping: The device is executing the … |