H3C-MPLS-VPN-BGP-MIB
43 objects
This MIB contains managed object definitions for the Multiprotocol Label Switching (MPLS)/Border Gateway Protocol (BGP) Virtual Private Networks (VPNs) as defined in : Rosen, E., Viswanathan, A., and R. Callon, Multiprotocol Label Switching Architecture, Internet Draft <draft-ietf-mpls-arch-06.txt>, August 1999.
Imported Objects
| HUAWEI-3COM-OID-MIB | h3cCommon |
| INET-ADDRESS-MIB | InetAddressType |
| SNMPv2-SMI | Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | RowStatus TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2011.10.2.160 | Identityh3cMplsVpnBgp | This MIB contains managed object definitions for the Multiprotocol Label Switching (MPLS)/Border Gateway Protocol (BGP) Virtual Private Networks (VPNs) as defi… | ||
| 1.3.6.1.4.1.2011.10.2.160.1 | Nodeh3cMplsVpnObjects | |||
| 1.3.6.1.4.1.2011.10.2.160.1.1 | Nodeh3cMplsVpnConf | |||
| 1.3.6.1.4.1.2011.10.2.160.1.1.1 | Tableh3cMplsVpnVrfConfTable | not-accessible | current | This table specifies per-interface MPLS/BGP VPN VRF Table capability and associated information. Entries in this table define VRF routing instances associated … |
| 1.3.6.1.4.1.2011.10.2.160.1.1.1.1 | Rowh3cMplsVpnVrfConfEntry | not-accessible | current | An entry in this table is created by an LSR for every VRF capable of supporting MPLS/BGP VPN. The indexing provides an ordering of VRFs per-VPN interface. |
| 1.3.6.1.4.1.2011.10.2.160.1.1.1.1.1 | Columnh3cMplsVpnVrfName | not-accessible | current | The human-readable name of this VPN. This MAY be equivalent to the RFC2685 VPN-ID. |
| 1.3.6.1.4.1.2011.10.2.160.1.1.1.1.2 | Columnh3cMplsVpnVrfRtDistinguisher | read-create | current | The route distinguisher for this VRF. |
| 1.3.6.1.4.1.2011.10.2.160.1.1.1.1.3 | Columnh3cMplsVpnVrfNetPrefixType | read-only | current | Denotes the type of the network prefix in use for the PE-CE connections. |
| 1.3.6.1.4.1.2011.10.2.160.1.1.1.1.4 | Columnh3cMplsVpnVrfNetPrefix | read-only | current | Denotes the network prefix for the PE-CE connections. |
| 1.3.6.1.4.1.2011.10.2.160.1.1.1.1.5 | Columnh3cMplsVpnVrfIpRtRedistributeConn | read-create | current | Denotes the redistribution of directly connected networks into the VRF BGP table. |
| 1.3.6.1.4.1.2011.10.2.160.1.1.1.1.6 | Columnh3cMplsVpnVrfIpRtRedistributeStatic | read-create | current | Denotes the redistribution of static routes into the VRF BGP table. |
| 1.3.6.1.4.1.2011.10.2.160.1.1.1.1.7 | Columnh3cMplsVpnVrfIpRtRedistributeRip | read-create | current | Denotes the redistribution of RIP routes into the VRF BGP table. |
| 1.3.6.1.4.1.2011.10.2.160.1.1.1.1.8 | Columnh3cMplsVpnVrfConfHighRtThreshold | read-create | current | Denotes high-level water marker for the number of routes which this VRF may hold. |
| 1.3.6.1.4.1.2011.10.2.160.1.1.1.1.9 | Columnh3cMplsVpnVrfConfIsWarnOnly | read-create | current | Denotes the action when the amount of VPN's routes exceed the h3cMplsVpnVrfConfHighRtThreshold. |
| 1.3.6.1.4.1.2011.10.2.160.1.1.1.1.10 | Columnh3cMplsVpnVrfConfMaxRts | read-create | current | Denotes maximum number of routes which this VRF is configured to hold. This value MUST be less than or equal to h3cMplsVrfMaxPossibleRts unless it is set to 0. |
| 1.3.6.1.4.1.2011.10.2.160.1.1.1.1.11 | Columnh3cMplsVpnVrfConfRowStatus | read-create | current | This variable is used to create, modify, and/or delete a row in this table. |
| 1.3.6.1.4.1.2011.10.2.160.1.1.2 | Tableh3cMplsVpnVrfBgpNbrAddrTable | not-accessible | current | This table specifies per-interface MPLS/BGP neighbor addresses for both PEs and CEs. |
| 1.3.6.1.4.1.2011.10.2.160.1.1.2.1 | Rowh3cMplsVpnVrfBgpNbrAddrEntry | not-accessible | current | An entry in this table is created by an LSR for every VRF capable of supporting MPLS/BGP VPN. The indexing provides an ordering of VRFs per-VPN interface. |
| 1.3.6.1.4.1.2011.10.2.160.1.1.2.1.1 | Columnh3cMplsVpnVrfBgpNbrAddr | not-accessible | current | Denotes the BGP neighbor address. |
| 1.3.6.1.4.1.2011.10.2.160.1.1.2.1.2 | Columnh3cMplsVpnVrfBgpNbrRole | read-create | current | Denotes the role played by this BGP neighbor with respect to this VRF. |
| 1.3.6.1.4.1.2011.10.2.160.1.1.2.1.3 | Columnh3cMplsVpnVrfBgpNbrAsNumber | read-create | current | The Autonomous System that the BGP's neighbour in. |
| 1.3.6.1.4.1.2011.10.2.160.1.1.2.1.4 | Columnh3cMplsVpnVrfBgpNbrAdminStatus | read-create | current | The action set by SNMP client. |
| 1.3.6.1.4.1.2011.10.2.160.1.1.2.1.5 | Columnh3cMplsVpnVrfBgpNbrRowStatus | read-create | current | This variable is used to create, modify, and/or delete a row in this table. |
| 1.3.6.1.4.1.2011.10.2.160.1.1.2.1.6 | Columnh3cMplsVpnVrfBgpNbrState | read-only | current | The BGP neighbor connection state. |
| 1.3.6.1.4.1.2011.10.2.160.1.1.3 | Tableh3cMplsVpnVrfBgpNbrPrefixTable | not-accessible | current | This table specifies per-VRF vpnv4 multi-protocol prefixes supported by BGP. |
| 1.3.6.1.4.1.2011.10.2.160.1.1.3.1 | Rowh3cMplsVpnVrfBgpNbrPrefixEntry | not-accessible | current | An entry in this table is created by an LSR for every BGP prefix associated with a VRF supporting a MPLS/BGP VPN. The indexing provides an ordering of BGP pref… |
| 1.3.6.1.4.1.2011.10.2.160.1.1.3.1.1 | Columnh3cMplsVpnVrfBgpPAtrPeer | not-accessible | current | The IP address of the peer where the path information was learned. |
| 1.3.6.1.4.1.2011.10.2.160.1.1.3.1.2 | Columnh3cMplsVpnVrfBgpPAtrIpAddrPrefixLen | not-accessible | current | Length in bits of the IP address prefix in the Network Layer Reachability Information field. |
| 1.3.6.1.4.1.2011.10.2.160.1.1.3.1.3 | Columnh3cMplsVpnVrfBgpPAtrIpAddrPrefix | not-accessible | current | An IP address prefix in the Network Layer Reachability Information field. This object is an IP address containing the prefix with length specified by mplsVpnVr… |
| 1.3.6.1.4.1.2011.10.2.160.1.1.3.1.4 | Columnh3cMplsVpnVrfBgpPAtrPeerType | read-only | current | Address type of the mplsVpnVrfBgpPAtrPeer object. |
| 1.3.6.1.4.1.2011.10.2.160.1.1.3.1.5 | Columnh3cMplsVpnVrfBgpPAtrOrigin | read-only | current | The ultimate origin of the path information. |
| 1.3.6.1.4.1.2011.10.2.160.1.1.3.1.6 | Columnh3cMplsVpnVrfBgpPAtrASPathSegment | read-only | current | The sequence of AS path segments. Each AS path segment is represented by a triple <type, length, value>. The type is a 1-octet field which has two possible val… |
| 1.3.6.1.4.1.2011.10.2.160.1.1.3.1.7 | Columnh3cMplsVpnVrfBgpPAtrNextHop | read-only | current | The address of the border router that should be used for the destination network. |
| 1.3.6.1.4.1.2011.10.2.160.1.1.3.1.8 | Columnh3cMplsVpnVrfBgpPAtrMultiExitDisc | read-only | current | This metric is used to discriminate between multiple exit points to an adjacent autonomous system. A value of -1 indicates the absence of this attribute. |
| 1.3.6.1.4.1.2011.10.2.160.1.1.3.1.9 | Columnh3cMplsVpnVrfBgpPAtrLocalPref | read-only | current | The originating BGP4 speaker's degree of preference for an advertised route. A value of -1 indicates the absence of this attribute. |
| 1.3.6.1.4.1.2011.10.2.160.1.1.3.1.10 | Columnh3cMplsVpnVrfBgpPAtrAtomicAggregate | read-only | current | If the ATOMIC_AGGREGATE attribute is present in the Path Attributes then this object MUST have a value of 'lessSpecificRouteNotSelected'. If the ATOMIC_AGGREGA… |
| 1.3.6.1.4.1.2011.10.2.160.1.1.3.1.11 | Columnh3cMplsVpnVrfBgpPAtrAggregatorAS | read-only | current | The AS number of the last BGP4 speaker that performed route aggregation. A value of zero (0) indicates the absence of this attribute. |
| 1.3.6.1.4.1.2011.10.2.160.1.1.3.1.12 | Columnh3cMplsVpnVrfBgpPAtrAggregatorAddr | read-only | current | The IP address of the last BGP4 speaker that performed route aggregation. A value of 0.0.0.0 indicates the absence of this attribute. |
| 1.3.6.1.4.1.2011.10.2.160.1.1.3.1.13 | Columnh3cMplsVpnVrfBgpPAtrCalcLocalPref | read-only | current | The degree of preference calculated by the receiving BGP4 speaker for an advertised route. A value of -1 indicates the absence of this attribute. |
| 1.3.6.1.4.1.2011.10.2.160.1.1.3.1.14 | Columnh3cMplsVpnVrfBgpPAtrBest | read-only | current | An indication of whether or not this route was chosen as the best BGP4 route. |
| 1.3.6.1.4.1.2011.10.2.160.1.1.3.1.15 | Columnh3cMplsVpnVrfBgpPAtrUnknown | read-only | current | One or more path attributes not understood by this BGP4 speaker. A zero-length string indicates the absence of such attribute(s). Octets beyond the maximum siz… |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| H3cMplsVpnId | OCTET STRING(SIZE (0..31)) | current | An identifier that is assigned to each MPLS/BGP VPN and is used to uniquely identify it. This is assigned by the system operator or NMS and SHOULD be unique throughout the MPLS domain. If this is the case, then this ide… |
| H3cMplsVpnRtDistinguisher | OCTET STRING(SIZE (0..256)) | current | Syntax for a route distinguisher and route target. |