H3C-PROTOCOL-VLAN-MIB
34 objects
This MIB contains the objects for managing the protocol-based VLAN configurations.
Imported Objects
| HUAWEI-3COM-OID-MIB | h3cCommon |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | RowStatus TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2011.10.2.16 | Identityh3cProtocolVlan | This MIB contains the objects for managing the protocol-based VLAN configurations. | ||
| 1.3.6.1.4.1.2011.10.2.16.1 | Nodeh3cProtocolVlanOperate | |||
| 1.3.6.1.4.1.2011.10.2.16.1.1 | Scalarh3cProtocolNumAllVlan | read-only | current | The maximum number of protocols that can be configured on all VLANs. This number may vary with products. |
| 1.3.6.1.4.1.2011.10.2.16.1.2 | Scalarh3cProtocolNumPerVlan | read-only | current | The maximum number of protocols that can be configured per VLAN. This number may vary with products. |
| 1.3.6.1.4.1.2011.10.2.16.1.3 | Scalarh3cProtocolNumAllPort | read-only | current | The maximum number of protocols that can be applied on all ports. This number may vary with products. |
| 1.3.6.1.4.1.2011.10.2.16.1.4 | Scalarh3cProtocolNumPerPort | read-only | current | The maximum number of protocols that can be applied to each port. This number may vary with products. |
| 1.3.6.1.4.1.2011.10.2.16.1.5 | Tableh3cProtocolVlanTable | not-accessible | current | Protocol-based VLAN configuration table. |
| 1.3.6.1.4.1.2011.10.2.16.1.5.1 | Rowh3cProtocolVlanEntry | not-accessible | current | Protocol-based VLAN configuration entry. |
| 1.3.6.1.4.1.2011.10.2.16.1.5.1.1 | Columnh3cProtocolVlanVlanId | not-accessible | current | Vlan ID. |
| 1.3.6.1.4.1.2011.10.2.16.1.5.1.2 | Columnh3cProtocolVlanProtocolIndex | not-accessible | current | The protocol index value of a row in this table is in the range of [0..h3cProtocolNumPerVlan-1]. This object may not be provided during creation. In this case,… |
| 1.3.6.1.4.1.2011.10.2.16.1.5.1.3 | Columnh3cProtocolVlanProtocolType | read-create | current | Specify protocol types supported by a protocol-based VLAN. Now protocols supported on Layer 3 include ip, ipx, at, ipv6, etc. Now protocols supported on Layer … |
| 1.3.6.1.4.1.2011.10.2.16.1.5.1.4 | Columnh3cProtocolVlanProtocolSubType | read-create | current | See description of h3cProtocolVlanProtocolTypeValue. |
| 1.3.6.1.4.1.2011.10.2.16.1.5.1.5 | Columnh3cProtocolVlanProtocolTypeValue | read-create | current | The value of the configured protocol type. By default, semicolon(;) is used as a separator between different parts in the content of the object. The relationsh… |
| 1.3.6.1.4.1.2011.10.2.16.1.5.1.6 | Columnh3cProtocolVlanRowStatus | read-create | current | The row status of this table. |
| 1.3.6.1.4.1.2011.10.2.16.1.6 | Tableh3cProtocolVlanPortTable | not-accessible | current | Protocol-based VLAN port information table. |
| 1.3.6.1.4.1.2011.10.2.16.1.6.1 | Rowh3cProtocolVlanPortEntry | not-accessible | current | Protocol-based VLAN port information entry. |
| 1.3.6.1.4.1.2011.10.2.16.1.6.1.1 | Columnh3cProtocolVlanPortIndex | not-accessible | current | The maximum number is the total number of ports supported by device. |
| 1.3.6.1.4.1.2011.10.2.16.1.6.1.2 | Columnh3cProtocolVlanPortVlanId | not-accessible | current | The protocol-based VLAN ID. |
| 1.3.6.1.4.1.2011.10.2.16.1.6.1.3 | Columnh3cProtocolVlanPortProtocolId | not-accessible | current | The protocol index. |
| 1.3.6.1.4.1.2011.10.2.16.1.6.1.4 | Columnh3cProtocolVlanPortProtocolType | read-only | current | See the description of h3cProtocolVlanProtocolType. |
| 1.3.6.1.4.1.2011.10.2.16.1.6.1.5 | Columnh3cProtocolVlanPortProtocolSubType | read-only | current | See the description of h3cProtocolVlanProtocolSubType. |
| 1.3.6.1.4.1.2011.10.2.16.1.6.1.6 | Columnh3cProtocolVlanPortTypeValue | read-only | current | See the description of h3cProtocolVlanProtocolTypeValue. |
| 1.3.6.1.4.1.2011.10.2.16.1.6.1.7 | Columnh3cProtocolVlanPortRowStatus | read-create | current | The row status of this table. |
| 1.3.6.1.4.1.2011.10.2.16.1.6.1.8 | Columnh3cProtocolVlanPortStatus | read-only | current | The protocol VLAN status on the port. The value is active only when h3cProtocolVlanPortProtocolId has the corresponding entry in h3cProtocolVlanTable, the port… |
| 1.3.6.1.4.1.2011.10.2.16.1.7 | Scalarh3cDifferentProtocolNumAllPort | read-only | current | The maximum number of different protocols that can be applied to all ports. |
| 1.3.6.1.4.1.2011.10.2.16.2 | Nodeh3cProtocolVlanConformance | |||
| 1.3.6.1.4.1.2011.10.2.16.2.1 | Nodeh3cProtocolVlanCompliances | |||
| 1.3.6.1.4.1.2011.10.2.16.2.1.1 | Complianceh3cProtocolVlanCompliance | current | The compliance statement for protocol VLAN MIB. | |
| 1.3.6.1.4.1.2011.10.2.16.2.2 | Nodeh3cProtocolVlanGroups | |||
| 1.3.6.1.4.1.2011.10.2.16.2.2.1 | Grouph3cProtocolVlanOperateGroup | current | A group of scalar objects describing the maximum number. | |
| 1.3.6.1.4.1.2011.10.2.16.2.2.2 | Grouph3cProtocolVlanProtocolGroup | current | A group of protocol VLAN protocol. | |
| 1.3.6.1.4.1.2011.10.2.16.2.2.3 | Grouph3cProtocolVlanPortGroup | current | A group of protocol VLAN port. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| H3cvProtocolVlanProtocolSubType | INTEGER { notused(1), ethernetii(2), llc(3), raw(4), snap(5), etype(6) } | current | combine with H3cvProtocolVlanProtocolType. ethernetii(2), llc(3), raw(4), snap(5) are used when the value of H3cvProtocolVlanProtocolType is for Layer 3 protocols. etype(6) is used when the value of H3cvProtocolVlanProt… |
| H3cvProtocolVlanProtocolType | INTEGER { ip(1), ipx(2), at(3), ipv6(4), mode-llc(101), mode-snap(102), mode-ethernetii(103), notConfigure(201) } | current | Contains protocols both for Layer 3 and Layer 2. |