MIB Viewer

H3C-RMON-EXT2-MIB

21 objects
The private MIB module for managing remote monitoring device implementations.
Imported Objects
HUAWEI-3COM-OID-MIBh3cCommon
RMON-MIBEntryStatus OwnerString
SNMPv2-SMIInteger32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-IDENTITY OBJECT-TYPE
SNMPv2-TCDisplayString
OIDNameAccessStatusDescription
1.3.6.1.4.1.2011.10.2.125Identityh3cRmonExtThe private MIB module for managing remote monitoring device implementations.
1.3.6.1.4.1.2011.10.2.125.0Identityh3cRmonExtEventcurrentDefinition point for notifications.
1.3.6.1.4.1.2011.10.2.125.0.1Notificationh3cRmonExtRisingAlarmcurrentThe SNMP trap that is generated when an alarm entry crosses its rising threshold and generates an event that is configured for sending SNMP traps.
1.3.6.1.4.1.2011.10.2.125.0.2Notificationh3cRmonExtFallingAlarmcurrentThe SNMP trap that is generated when an alarm entry crosses its falling threshold and generates an event that is configured for sending SNMP traps.
1.3.6.1.4.1.2011.10.2.125.1Tableh3cRmonExtAlarmTablenot-accessiblecurrentA list of alarm entries.
1.3.6.1.4.1.2011.10.2.125.1.1Rowh3cRmonExtAlarmEntrynot-accessiblecurrentA list of parameters that set up a periodic checking for alarm conditions. For example, an instance of the alarmValue object might be named alarmValue.8
1.3.6.1.4.1.2011.10.2.125.1.1.1Columnh3cRmonExtAlarmIndexread-onlycurrentAn index that uniquely identifies an entry in the alarm table. Each such entry defines a diagnostic sample at a particular interval for an object on the device.
1.3.6.1.4.1.2011.10.2.125.1.1.2Columnh3cRmonExtAlarmIntervalread-createcurrentThe interval in seconds over which the data is sampled and compared with the rising and falling thresholds. When setting this variable, care should be taken in…
1.3.6.1.4.1.2011.10.2.125.1.1.3Columnh3cRmonExtAlarmVariableread-createcurrentThe object identifier of the particular variable to be sampled. Only variables that resolve to an ASN.1 primitive type of INTEGER (INTEGER, Integer32, Unsigned…
1.3.6.1.4.1.2011.10.2.125.1.1.4Columnh3cRmonExtAlarmSympolread-createcurrentA comment describing this alarm entry. This object may not be modified if the associated alarmStatus object is equal to valid.
1.3.6.1.4.1.2011.10.2.125.1.1.5Columnh3cRmonExtAlarmSampleTyperead-createcurrentThe method of sampling the selected variable and calculating the value to be compared against the thresholds. If the value of this object is absoluteValue, the…
1.3.6.1.4.1.2011.10.2.125.1.1.6Columnh3cRmonExtAlarmValueread-onlycurrentThe value of the statistic during the last sampling period. For example, if the sample type is deltaValue, this value will be the difference between the sample…
1.3.6.1.4.1.2011.10.2.125.1.1.7Columnh3cRmonExtAlarmStartupAlarmread-createcurrentThe alarm that may be sent when this entry is first set to valid. If the first sample after this entry becomes valid is greater than or equal to the risingThre…
1.3.6.1.4.1.2011.10.2.125.1.1.8Columnh3cRmonExtAlarmRisingThresholdread-createcurrentA threshold for the sampled statistic. When the current sampled value is greater than or equal to this threshold, and the value at the last sampling interval w…
1.3.6.1.4.1.2011.10.2.125.1.1.9Columnh3cRmonExtAlarmFallingThresholdread-createcurrentA threshold for the sampled statistic. When the current sampled value is less than or equal to this threshold, and the value at the last sampling interval was …
1.3.6.1.4.1.2011.10.2.125.1.1.10Columnh3cRmonExtAlarmRisingEvtIndexread-createcurrentThe index of the eventEntry that is used when a rising threshold is crossed. The eventEntry identified by a particular value of this index is the same as ident…
1.3.6.1.4.1.2011.10.2.125.1.1.11Columnh3cRmonExtAlarmFallingEvtIndexread-createcurrentThe index of the eventEntry that is used when a falling threshold is crossed. The eventEntry identified by a particular value of this index is the same as iden…
1.3.6.1.4.1.2011.10.2.125.1.1.12Columnh3cRmonExtAlarmStatCycleread-createcurrentThe lifetime (in seconds) starts when an alarm entry is set in valid state. If the entry has an infinite lifetime, the value of this object MUST be 0. Otherwis…
1.3.6.1.4.1.2011.10.2.125.1.1.13Columnh3cRmonExtAlarmStatTyperead-createcurrentThis object indicates whether the entry has an infinite or limited lifetime. This object may not be modified if the associated alarmStatus object is equal to v…
1.3.6.1.4.1.2011.10.2.125.1.1.14Columnh3cRmonExtAlarmOwnerread-createcurrentThe entity that configured this entry and is therefore using the resources assigned to it. The defalut value of this object is zero length string.
1.3.6.1.4.1.2011.10.2.125.1.1.15Columnh3cRmonExtAlarmStatusread-createcurrentThe status of this alarm entry.