H3C-RRPP-MIB
55 objects
The RRPP (Rapid Ring Protection protocol) provides fast protection switching to layer 2 switches interconnected in an Ethernet ring topology. When a link in the ring breaks, the RRPP can recover the data path quickly. Its protection switching is similar to what can be achieved with the Spanning Tree Protocol (STP), but the converging time is less than a second after link failure. This MIB defines management information used on products which support RRPP.
Imported Objects
| HUAWEI-3COM-OID-MIB | h3cCommon |
| SNMPv2-SMI | Counter32 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE |
| SNMPv2-TC | RowStatus TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2011.10.2.45 | Identityh3cRrpp | The RRPP (Rapid Ring Protection protocol) provides fast protection switching to layer 2 switches interconnected in an Ethernet ring topology. When a link in th… | ||
| 1.3.6.1.4.1.2011.10.2.45.1 | Nodeh3cRrppScalarGroup | |||
| 1.3.6.1.4.1.2011.10.2.45.1.1 | Scalarh3cRrppEnableStatus | read-write | current | Indicating whether the RRPP is enabled on this switch. |
| 1.3.6.1.4.1.2011.10.2.45.1.2 | Scalarh3cRrppPassword | read-write | current | Password configured for RRPP nodes to identify the validity of a link-down message. This value must be set together with h3cRrppPasswordType which indicates wh… |
| 1.3.6.1.4.1.2011.10.2.45.1.3 | Scalarh3cRrppPasswordType | read-write | current | Indicating whether the h3cRrppPassword can be got. simple(1):h3cRrppPassword can be got. cipher(2):h3cRrppPassword can not be got. This value can not be set al… |
| 1.3.6.1.4.1.2011.10.2.45.1.4 | Scalarh3cRrppProtectVlanConfigMode | read-only | current | Indicating the mode in which the protected VLANs of an RRPP domain are configured. The value 'vlan' indicates that h3cRrppDomainProtectVlanListLow and h3cRrppD… |
| 1.3.6.1.4.1.2011.10.2.45.2 | Nodeh3cRrppTable | |||
| 1.3.6.1.4.1.2011.10.2.45.2.1 | Tableh3cRrppDomainTable | not-accessible | current | A table containing information about configurations and status of a RRPP domain. |
| 1.3.6.1.4.1.2011.10.2.45.2.1.1 | Rowh3cRrppDomainEntry | not-accessible | current | Detailed information of a specified RRPP domain. |
| 1.3.6.1.4.1.2011.10.2.45.2.1.1.1 | Columnh3cRrppDomainID | accessible-for-notify | current | An index uniquely identifies a RRPP domain, which ranges from 1~128. This value can't be modified after created. |
| 1.3.6.1.4.1.2011.10.2.45.2.1.1.2 | Columnh3cRrppDomainControlVlanID | read-create | current | Index of the control VLAN specified to a domain. The value 65535 indicates the control VLAN has not been configured. The VLAN assigned to a RRPP Domain must no… |
| 1.3.6.1.4.1.2011.10.2.45.2.1.1.3 | Columnh3cRrppDomainHelloTime | read-create | current | The value indicates the interval between two hello packets sent by master-node, and its unit is second. The value ranges from 1s~10s. |
| 1.3.6.1.4.1.2011.10.2.45.2.1.1.4 | Columnh3cRrppDomainFailTime | read-create | current | The expiration value of the fail-period timer and its unit is second. If not receiving hello packets before this expires, the master-node considers the ring is… |
| 1.3.6.1.4.1.2011.10.2.45.2.1.1.5 | Columnh3cRrppDomainRowStatus | read-create | current | This object is responsible for managing the creation, deletion and modification of rows, which support active status and CreatAndGo, destroy operation. |
| 1.3.6.1.4.1.2011.10.2.45.2.1.1.6 | Columnh3cRrppDomainInstanceListLow | read-create | current | Each octet contained in this value specifies an eight-instance group, with the first octet specifying instances 0 through 7, the second octet specifying instan… |
| 1.3.6.1.4.1.2011.10.2.45.2.1.1.7 | Columnh3cRrppDomainInstanceListHigh | read-create | current | Each octet contained in this value specifies an eight-instance group, with the first octet specifying instances 2048 through 2055, the second octet specifying … |
| 1.3.6.1.4.1.2011.10.2.45.2.1.1.8 | Columnh3cRrppDomainProtectVlanListLow | read-create | current | Each octet contained in this value specifies an eight-VLAN group, with the first octet specifying VLANs 1 through 7, the second octet specifying VLANs 8 throug… |
| 1.3.6.1.4.1.2011.10.2.45.2.1.1.9 | Columnh3cRrppDomainProtectVlanListHigh | read-create | current | Each octet contained in this value specifies an eight-VLAN group, with the first octet specifying VLANs 2048 through 2055, the second octet specifying VLANs 20… |
| 1.3.6.1.4.1.2011.10.2.45.2.2 | Tableh3cRrppRingTable | not-accessible | current | A table containing information about configurations and status of a RRPP Ring. |
| 1.3.6.1.4.1.2011.10.2.45.2.2.1 | Rowh3cRrppRingEntry | not-accessible | current | Detailed information of a specified RRPP Ring. |
| 1.3.6.1.4.1.2011.10.2.45.2.2.1.1 | Columnh3cRrppRingID | accessible-for-notify | current | An index uniquely identifies a RRPP Ring, which ranges from 1~128. This value can't be modified after created. |
| 1.3.6.1.4.1.2011.10.2.45.2.2.1.2 | Columnh3cRrppRingEnableStatus | read-create | current | Indicating whether the RRPP is enabled on this Ring. NOTE: If major-ring and sub-ring(s) of a domain coexist on a switch, major-ring must be enabled before sub… |
| 1.3.6.1.4.1.2011.10.2.45.2.2.1.3 | Columnh3cRrppRingActive | read-only | current | As both h3cRrppEnableStatus and h3cRrppRingEnableStatus are enabled, the ring is activated. Whereas either of the two items is disabled, the ring is inactive. |
| 1.3.6.1.4.1.2011.10.2.45.2.2.1.4 | Columnh3cRrppRingState | read-only | current | The status (i.e. unknown, health or fault) of the Ethernet ring. This is valid only on the master-node. |
| 1.3.6.1.4.1.2011.10.2.45.2.2.1.5 | Columnh3cRrppRingNodeMode | read-create | current | There are four RRPP node modes for the switch on a RRPP ring, such as master, transit, edge and assistant-edge. Each RRPP ring has a single designated master-n… |
| 1.3.6.1.4.1.2011.10.2.45.2.2.1.6 | Columnh3cRrppRingPrimaryPort | read-create | current | If the switch is a master-node or transit-node, this value is the primary port ifIndex; otherwise, if the switch is a edge-node or assistant-edge-node, this va… |
| 1.3.6.1.4.1.2011.10.2.45.2.2.1.7 | Columnh3cRrppRingSecondaryPort | read-create | current | If the switch is a master-node or transit-node, this value is the secondary port ifIndex; otherwise, if the switch is an edge-node or assistant-edge-node, this… |
| 1.3.6.1.4.1.2011.10.2.45.2.2.1.8 | Columnh3cRrppRingLevel | read-create | current | Level of a ring. This field should be set 1 on major-ring and 2 on the sub-ring. This value can't be modified after created. |
| 1.3.6.1.4.1.2011.10.2.45.2.2.1.9 | Columnh3cRrppRingRowStatus | read-create | current | This object is responsible for managing the creation, deletion and modification of rows, which support active status and CreatAndGo, destroy operation. To crea… |
| 1.3.6.1.4.1.2011.10.2.45.2.3 | Tableh3cRrppPortTable | not-accessible | current | A table containing information about configurations and status of a RRPP port. |
| 1.3.6.1.4.1.2011.10.2.45.2.3.1 | Rowh3cRrppPortEntry | not-accessible | current | Detailed information of a specified RRPP port. |
| 1.3.6.1.4.1.2011.10.2.45.2.3.1.1 | Columnh3cRrppPortID | not-accessible | current | ifIndex of the port. |
| 1.3.6.1.4.1.2011.10.2.45.2.3.1.2 | Columnh3cRrppPortRole | read-only | current | The RRPP role of the port. (i.e. primary, secondary, common or edge port). |
| 1.3.6.1.4.1.2011.10.2.45.2.3.1.3 | Columnh3cRrppPortState | read-only | current | State of RRPP port, including unknown, unblocked, blocked and down. |
| 1.3.6.1.4.1.2011.10.2.45.2.3.1.4 | Columnh3cRrppPortRXError | read-only | current | The statistics of illegal RRPP packets received from this port. |
| 1.3.6.1.4.1.2011.10.2.45.2.3.1.5 | Columnh3cRrppPortRXHello | read-only | current | The statistics of hello packets received from this port on specified ring. |
| 1.3.6.1.4.1.2011.10.2.45.2.3.1.6 | Columnh3cRrppPortRXLinkUp | read-only | current | The statistics of link-up packets received from this port on specified ring. |
| 1.3.6.1.4.1.2011.10.2.45.2.3.1.7 | Columnh3cRrppPortRXLinkDown | read-only | current | The statistics of link-down packets received from this port on specified ring. |
| 1.3.6.1.4.1.2011.10.2.45.2.3.1.8 | Columnh3cRrppPortRXCommonFlush | read-only | current | The statistics of common-flush packets received from this port on specified ring. Instruction When master-node receives valid link-down packets or link-up pack… |
| 1.3.6.1.4.1.2011.10.2.45.2.3.1.9 | Columnh3cRrppPortRXCompleteFlush | read-only | current | The statistics of complete-flush packets received from this port on specified ring. Instruction When the ring recovers, master-node will receive its own hello … |
| 1.3.6.1.4.1.2011.10.2.45.2.3.1.10 | Columnh3cRrppPortTXHello | read-only | current | The statistics of hello packets sent from this port on specified ring. |
| 1.3.6.1.4.1.2011.10.2.45.2.3.1.11 | Columnh3cRrppPortTXLinkUp | read-only | current | The statistics of link-up packets sent from this port on specified ring. |
| 1.3.6.1.4.1.2011.10.2.45.2.3.1.12 | Columnh3cRrppPortTXLinkDown | read-only | current | The statistics of link-down packets sent from this port on specified ring. |
| 1.3.6.1.4.1.2011.10.2.45.2.3.1.13 | Columnh3cRrppPortTXCommonFlush | read-only | current | The statistics of common-flush packets sent from this port on specified ring. |
| 1.3.6.1.4.1.2011.10.2.45.2.3.1.14 | Columnh3cRrppPortTXCompleteFlush | read-only | current | The statistics of complete-flush packets sent from this port on specified ring. |
| 1.3.6.1.4.1.2011.10.2.45.2.3.1.15 | Columnh3cRrppPortRXEdgeHello | read-only | current | The statistics of edge-hello packets received from this port on specified ring. When edge-node sends edge-hello packets, assistantEdge-node will receive its ow… |
| 1.3.6.1.4.1.2011.10.2.45.2.3.1.16 | Columnh3cRrppPortRXMajorFault | read-only | current | The statistics of major-fault packets received from this port on specified ring. When assistantEdge can't receive edge-hello packets in the specified fault-tim… |
| 1.3.6.1.4.1.2011.10.2.45.2.3.1.17 | Columnh3cRrppPortTXEdgeHello | read-only | current | The statistics of edge-hello packets sent from this port on specified ring. |
| 1.3.6.1.4.1.2011.10.2.45.2.3.1.18 | Columnh3cRrppPortTXMajorFault | read-only | current | The statistics of major-fault packets sent from this port on specified ring. |
| 1.3.6.1.4.1.2011.10.2.45.3 | Nodeh3cRrppNotifications | |||
| 1.3.6.1.4.1.2011.10.2.45.3.1 | Notificationh3cRrppRingRecover | current | Trap message is generated by master-node on the ring when the ring recovers from fault. | |
| 1.3.6.1.4.1.2011.10.2.45.3.2 | Notificationh3cRrppRingFail | current | Trap message is generated by master-node on the ring when the ring fails. | |
| 1.3.6.1.4.1.2011.10.2.45.3.3 | Notificationh3cRrppMultiMaster | current | Trap message is generated by master-node when it detects there are more than one master-node on the ring. | |
| 1.3.6.1.4.1.2011.10.2.45.3.4 | Notificationh3cRrppMajorFault | current | Trap message is generated by edge-node or assistant-edge-node when it detects major fault. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| EnabledStatus | INTEGER{enabled(1),disabled(2)} | current | A simple status value for the object. |