H3C-STORAGE-SNAP-MIB
157 objects
This MIB describes the general information about snap of storage device.
Imported Objects
| ENTITY-MIB | entPhysicalIndex |
| H3C-STORAGE-REF-MIB | H3cExtendSelectPolicy H3cLvIDType H3cRaidIDType H3cStorageActionType H3cStorageEnableState H3cStorageOnlineState h3cStorageRef |
| INET-ADDRESS-MIB | InetAddress InetAddressType |
| SNMPv2-SMI | Counter32 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE |
| SNMPv2-TC | DateAndTime RowStatus TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2011.10.10.2 | Identityh3cStorageSnap | This MIB describes the general information about snap of storage device. | ||
| 1.3.6.1.4.1.2011.10.10.2.1 | Nodeh3cSnapMibObjects | |||
| 1.3.6.1.4.1.2011.10.10.2.1.1 | Nodeh3cGlobalSnapSettingsObject | |||
| 1.3.6.1.4.1.2011.10.10.2.1.1.1 | Scalarh3cAddtionalSpaceMaxSize | read-only | current | This object identifies the maximal size of snapshot resource, safecache, and Continued replication Resource . |
| 1.3.6.1.4.1.2011.10.10.2.1.2 | Tableh3cSnapConfigTable | not-accessible | current | This table contains some entity to config the snapshot resources for special logic volumes. |
| 1.3.6.1.4.1.2011.10.10.2.1.2.1 | Rowh3cSnapConfigEntry | not-accessible | current | An entry containing configuration about the snapshot resource. |
| 1.3.6.1.4.1.2011.10.10.2.1.2.1.1 | Columnh3cSnapLvIndex | not-accessible | current | This object identifies the index of h3cSnapConfigTable. The object identified by this index is the same object as identified by the same value of h3cLvIndex. |
| 1.3.6.1.4.1.2011.10.10.2.1.2.1.2 | Columnh3cSnapAreaId | read-only | current | This object identifies the snapshot resource of the logic volume. |
| 1.3.6.1.4.1.2011.10.10.2.1.2.1.3 | Columnh3cSnapAreaAutoExpand | read-create | current | This object describes if the space of snapshot resource can be expanded automatically. |
| 1.3.6.1.4.1.2011.10.10.2.1.2.1.4 | Columnh3cSnapAreaThreshold | read-create | current | If h3cSnapAreaAutoExpand is selected, the 'h3cSnapAreaThreshold' means the threshold of the snapshot resource. |
| 1.3.6.1.4.1.2011.10.10.2.1.2.1.5 | Columnh3cSnapAreaIncSize | read-create | current | If h3cSnapAreaAutoExpand is selected, the 'h3cSnapAreaIncSize' means the amount of space to be allocated for each expansion. |
| 1.3.6.1.4.1.2011.10.10.2.1.2.1.6 | Columnh3cSnapAreaMaxSize | read-create | current | If h3cSnapAreaAutoExpand is selected, the 'h3cSnapAreaIncSize' means the max size of snapshot resource. |
| 1.3.6.1.4.1.2011.10.10.2.1.2.1.7 | Columnh3cSnapAreaFullDeleteTM | read-create | current | This object identifies if the snapshot resource is out of space and expand failed, if the system delete the old timemark until enough space or not. |
| 1.3.6.1.4.1.2011.10.10.2.1.2.1.8 | Columnh3cSnapAreaNotify | read-create | current | This object describes if a snapshot notification should be send to the client when the system create a timemark. |
| 1.3.6.1.4.1.2011.10.10.2.1.2.1.9 | Columnh3cSnapAreaStatus | read-only | current | This object describes the state of the snapshot resource. |
| 1.3.6.1.4.1.2011.10.10.2.1.2.1.10 | Columnh3cSnapRaidUuid | read-create | current | This object describes the raid where the snapshot resource is created. |
| 1.3.6.1.4.1.2011.10.10.2.1.2.1.11 | Columnh3cSnapRaidSize | read-only | current | This object describes the size designated when the snapshot resource is created. |
| 1.3.6.1.4.1.2011.10.10.2.1.2.1.12 | Columnh3cSnapRaidSelectPolicy | read-create | current | This object describes the policy when the snapshot resource is created automatically. Note that the value can not be 'none' when the value of associated h3cSna… |
| 1.3.6.1.4.1.2011.10.10.2.1.2.1.13 | Columnh3cSnapAreaTotalSize | read-only | current | This object identifies the current total size of the snapshot resource. |
| 1.3.6.1.4.1.2011.10.10.2.1.2.1.14 | Columnh3cSnapAreaFreeSize | read-only | current | This object identifies the free size of the snapshot resource. |
| 1.3.6.1.4.1.2011.10.10.2.1.2.1.15 | Columnh3cSnapExtendTimes | read-only | current | This object identifies the times the snapshot resource extended. |
| 1.3.6.1.4.1.2011.10.10.2.1.2.1.16 | Columnh3cSnapRowStatus | read-create | current | This object identifies the action of snapshot resource. Note that the assocai snapshot resource can not be delete when a snapshot copy is processing or the Tim… |
| 1.3.6.1.4.1.2011.10.10.2.1.3 | Tableh3cSnapExpandTable | not-accessible | current | This table contains some entity to expand a snapshot resource. |
| 1.3.6.1.4.1.2011.10.10.2.1.3.1 | Rowh3cSnapExpandEntry | not-accessible | current | An entry containing expand information applicable to the snapshot resource. |
| 1.3.6.1.4.1.2011.10.10.2.1.3.1.1 | Columnh3cSAExpRaidUuid | not-accessible | current | This index is identical to h3cRaidUuid in H3C-RAID-MIB. |
| 1.3.6.1.4.1.2011.10.10.2.1.3.1.2 | Columnh3cSAExpSize | read-create | current | This object describes the increased size for snapshot resource when expanded. The units is million bytes. The value is always equal to zero when read. |
| 1.3.6.1.4.1.2011.10.10.2.1.3.1.3 | Columnh3cSAExpRaidSize | read-only | current | This object describes the size for snapshot resource on the raid. The units is million bytes. The value is always equal to zero when read. |
| 1.3.6.1.4.1.2011.10.10.2.1.3.1.4 | Columnh3cSnapAreaExpRowStatus | read-create | current | This object describes the actions to expand the size for snap. |
| 1.3.6.1.4.1.2011.10.10.2.1.4 | Tableh3cSnapCopyTable | not-accessible | current | This table contains some entity about snapshot copy. |
| 1.3.6.1.4.1.2011.10.10.2.1.4.1 | Rowh3cSnapCopyEntry | not-accessible | current | An entry containing snapshot copy information applicable. |
| 1.3.6.1.4.1.2011.10.10.2.1.4.1.1 | Columnh3cSnapCopyLvIndex | read-write | current | This object identifies the index of destination logic volume for snapshot copy. |
| 1.3.6.1.4.1.2011.10.10.2.1.4.1.2 | Columnh3cSnapCopyPercentage | read-only | current | This object identifies the percentage of snapshot copy. The value is equal to zero if the snapshot copy has not started. When finished, the value is always equ… |
| 1.3.6.1.4.1.2011.10.10.2.1.4.1.3 | Columnh3cSnapCopyStartTime | read-only | current | This object identifies the time to start the snapshot copy. |
| 1.3.6.1.4.1.2011.10.10.2.1.4.1.4 | Columnh3cSnapCopySwitch | read-write | current | This object describes the actions to start or stop the snapshot copy. When read, the value of 'none' will be get. Note that if the snapshot resource of source … |
| 1.3.6.1.4.1.2011.10.10.2.1.5 | Tableh3cTimeMarkConfigTable | not-accessible | current | This table contains some entity to config a TimeMark on a special logic volume. |
| 1.3.6.1.4.1.2011.10.10.2.1.5.1 | Rowh3cTimeMarkConfigEntry | not-accessible | current | An entry containing config information applicable to the TimeMark. |
| 1.3.6.1.4.1.2011.10.10.2.1.5.1.1 | Columnh3cTimeMarkCounts | read-write | current | This object identifies the max num of TimeMark which can be configed. |
| 1.3.6.1.4.1.2011.10.10.2.1.5.1.2 | Columnh3cTimeMarkInitializeTime | read-write | current | This object identifies the date and time when the first TimeMark is created on the logic volume. |
| 1.3.6.1.4.1.2011.10.10.2.1.5.1.3 | Columnh3cTimeMarkInterval | read-write | current | This object identifies the interval when the TimeMark is created automatically if the value of this object is not equal to zero. The units is second. the min v… |
| 1.3.6.1.4.1.2011.10.10.2.1.5.1.4 | Columnh3cTimeMarkLastTime | read-write | current | This object identifies the date and time when the latest TimeMark is created on the logic volume. |
| 1.3.6.1.4.1.2011.10.10.2.1.5.1.5 | Columnh3cTimeMarkTotal | read-only | current | This object identifies the current num of TimeMark. |
| 1.3.6.1.4.1.2011.10.10.2.1.5.1.6 | Columnh3cTimeMarkSwitch | read-create | current | This object describes enable or disable TimeMark. |
| 1.3.6.1.4.1.2011.10.10.2.1.6 | Tableh3cTimeMarkCreateTable | not-accessible | current | This table contains some entity to create a TimeMark on a special logic volume. |
| 1.3.6.1.4.1.2011.10.10.2.1.6.1 | Rowh3cTimeMarkCreateEntry | not-accessible | current | An entry containing create information applicable to the TimeMark. |
| 1.3.6.1.4.1.2011.10.10.2.1.6.1.1 | Columnh3cTimeMarkStamp | not-accessible | current | This object identifies the date and time the TimeMark is created. |
| 1.3.6.1.4.1.2011.10.10.2.1.6.1.2 | Columnh3cTimeMarkComment | read-only | current | This object identifies the comment of the TimeMark. |
| 1.3.6.1.4.1.2011.10.10.2.1.6.1.3 | Columnh3cTimeMarkSize | read-only | current | This object identifies the current size of the TimeMark. |
| 1.3.6.1.4.1.2011.10.10.2.1.6.1.4 | Columnh3cTimeMarkRowStatus | read-create | current | This object identifies the action to create or delete the TimeMark. Note that the TimeMark can not be deleted if it is using. |
| 1.3.6.1.4.1.2011.10.10.2.1.7 | Tableh3cTimeMarkCopyTable | not-accessible | current | This table contains some entity about a TimeMark copy. |
| 1.3.6.1.4.1.2011.10.10.2.1.7.1 | Rowh3cTimeMarkCopyEntry | not-accessible | current | An entry containing config information applicable to the TimeMark copy. |
| 1.3.6.1.4.1.2011.10.10.2.1.7.1.1 | Columnh3cTMCopyDestLvId | read-only | current | This object identifies the index of destination logic volume for TimeMark copy. |
| 1.3.6.1.4.1.2011.10.10.2.1.7.1.2 | Columnh3cTMCopyPercentage | read-only | current | This object identifies the percentage of TimeMark copy. The value is equal to zero if the TimeMark copy has not started. When finished, the value is always equ… |
| 1.3.6.1.4.1.2011.10.10.2.1.7.1.3 | Columnh3cTMCopyStartTime | read-only | current | This object identifies the time to start the TimeMark copy. |
| 1.3.6.1.4.1.2011.10.10.2.1.7.1.4 | Columnh3cTMCopySwitch | read-write | current | This object describes the actions to start or stop the TimeMark copy. When read, the value of 'none' will be get. |
| 1.3.6.1.4.1.2011.10.10.2.1.8 | Tableh3cTimeMarkRollbackTable | not-accessible | current | This table contains some entity to use a TimeMark to rollback the logic volume. |
| 1.3.6.1.4.1.2011.10.10.2.1.8.1 | Rowh3cTimeMarkRollbackEntry | not-accessible | current | An entry containing config information applicable to use a TimeMark to rollback the logic volume. |
| 1.3.6.1.4.1.2011.10.10.2.1.8.1.1 | Columnh3cTMRollbackPercentage | read-only | current | This object identifies the percentage of rollback. |
| 1.3.6.1.4.1.2011.10.10.2.1.8.1.2 | Columnh3cTMRollbackStartTime | read-only | current | This object identifies the time to start the rollback. |
| 1.3.6.1.4.1.2011.10.10.2.1.8.1.3 | Columnh3cTMRollbackSwitch | read-write | current | This object describes the actions to use a TimeMark to rollback the logic volume. Note that once you roll back, you cannot roll forward, all the later TimeMark… |
| 1.3.6.1.4.1.2011.10.10.2.1.9 | Tableh3cTimeViewTable | not-accessible | current | This table contains some entity to config a TimeView on a special TimeMark. |
| 1.3.6.1.4.1.2011.10.10.2.1.9.1 | Rowh3cTimeViewEntry | not-accessible | current | An entry containing config information applicable to the TimeView. |
| 1.3.6.1.4.1.2011.10.10.2.1.9.1.1 | Columnh3cTimeViewStamp | not-accessible | current | This object identifies the TimeView. The object identified by this index is the same object as identified by the same value of h3cTimeMarkStamp. |
| 1.3.6.1.4.1.2011.10.10.2.1.9.1.2 | Columnh3cTimeViewID | read-only | current | This object identifies the TimeView. |
| 1.3.6.1.4.1.2011.10.10.2.1.9.1.3 | Columnh3cTimeViewName | read-create | current | This object identifies the name of the TimeView. |
| 1.3.6.1.4.1.2011.10.10.2.1.9.1.4 | Columnh3cTimeViewRowStatus | read-create | current | This object describes the actions to create or delete the TimeView. |
| 1.3.6.1.4.1.2011.10.10.2.1.10 | Tableh3cReplicaConfigTable | not-accessible | current | This table contains some entity to config replication for a logic volume. |
| 1.3.6.1.4.1.2011.10.10.2.1.10.1 | Rowh3cReplicaConfigEntry | not-accessible | current | An entry containing config information applicable to the replication for a logic volume. |
| 1.3.6.1.4.1.2011.10.10.2.1.10.1.1 | Columnh3cRepLocalLvIndex | not-accessible | current | This object identifies the local logic volume that is related with replication. The object identified by this index is the same object as identified by the sam… |
| 1.3.6.1.4.1.2011.10.10.2.1.10.1.2 | Columnh3cLvRepLocalWay | read-only | current | The value of 'outgoing' means the h3cRepLocalLvIndex is the primary logic volume of replication, and the h3cRepRemoteLvIndex is the replica logic volume. The v… |
| 1.3.6.1.4.1.2011.10.10.2.1.10.1.3 | Columnh3cRepLocalServerIP | read-create | current | This object identifies the ip address of local server. |
| 1.3.6.1.4.1.2011.10.10.2.1.10.1.4 | Columnh3cRepLocalServerIPType | read-create | current | This object identifies the ip address type of local server. |
| 1.3.6.1.4.1.2011.10.10.2.1.10.1.5 | Columnh3cRepLocalServerName | read-only | current | This object identifies the name of local server. |
| 1.3.6.1.4.1.2011.10.10.2.1.10.1.6 | Columnh3cRepLocalServerUsername | read-create | current | This object identifies the username of local server. |
| 1.3.6.1.4.1.2011.10.10.2.1.10.1.7 | Columnh3cRepLocalServerPassword | read-create | current | This object identifies the password of local server. |
| 1.3.6.1.4.1.2011.10.10.2.1.10.1.8 | Columnh3cRepRemoteServerIP | read-create | current | This object identifies the ip address of remote server. |
| 1.3.6.1.4.1.2011.10.10.2.1.10.1.9 | Columnh3cRepRemoteServerIPType | read-create | current | This object identifies the ip address type of remote server. |
| 1.3.6.1.4.1.2011.10.10.2.1.10.1.10 | Columnh3cRepRemoteServerName | read-only | current | This object identifies the name of remote server. |
| 1.3.6.1.4.1.2011.10.10.2.1.10.1.11 | Columnh3cRepRemoteServerUsername | read-create | current | This object identifies the username of remote server. |
| 1.3.6.1.4.1.2011.10.10.2.1.10.1.12 | Columnh3cRepRemoteServerPassword | read-create | current | This object identifies the password of remote server. |
| 1.3.6.1.4.1.2011.10.10.2.1.10.1.13 | Columnh3cRepRemoteLvIndex | read-create | current | This object identifies the logic volume of remote server. |
| 1.3.6.1.4.1.2011.10.10.2.1.10.1.14 | Columnh3cReplicaMode | read-create | current | This object identifies the replication mode: The value of 'adaptive' means that data from the primary resource is continuously replicated to a replica resource… |
| 1.3.6.1.4.1.2011.10.10.2.1.10.1.15 | Columnh3cReplicaWatermark | read-create | current | This object identifies the size of watermark which means a replication is scheduled. |
| 1.3.6.1.4.1.2011.10.10.2.1.10.1.16 | Columnh3cReplicaWatermarkRetry | read-create | current | If the 'h3cReplicaWatermark' is set, This object identifies the interval time to retry if the last replication is failed. The units is minute. |
| 1.3.6.1.4.1.2011.10.10.2.1.10.1.17 | Columnh3cReplicaInitializeTime | read-create | current | This object identifies the time to start an initial replication. |
| 1.3.6.1.4.1.2011.10.10.2.1.10.1.18 | Columnh3cReplicaInterval | read-create | current | This object identifies how often the replication should be repeated after initial replication. The units is minute. |
| 1.3.6.1.4.1.2011.10.10.2.1.10.1.19 | Columnh3cReplicaEncrypt | read-create | current | This object identifies the encrypt option is enable or diable. |
| 1.3.6.1.4.1.2011.10.10.2.1.10.1.20 | Columnh3cReplicaCompress | read-create | current | This object identifies the compress option is enable or diable. |
| 1.3.6.1.4.1.2011.10.10.2.1.10.1.21 | Columnh3cReplicaUseExistTM | read-create | current | This object identifies if using the exist TimeMark to replicate or not. |
| 1.3.6.1.4.1.2011.10.10.2.1.10.1.22 | Columnh3cReplicaProtocol | read-create | current | This object identifies the protocol about replication. The value 'tcp' means Transmission Control Protocol, and 'rudp' means Reliable User Datagram Protocol. |
| 1.3.6.1.4.1.2011.10.10.2.1.10.1.23 | Columnh3cReplicaScanDiff | read-create | current | This object identifies the system to scan both the primary and replica resource to determine how much data needs to be synchronized. |
| 1.3.6.1.4.1.2011.10.10.2.1.10.1.24 | Columnh3cReplicaStatSwitch | read-create | current | This object identifies the action how to operate the replica. When read , a value of 'none' will be get. The value of 'promte' means remove the replication rel… |
| 1.3.6.1.4.1.2011.10.10.2.1.10.1.25 | Columnh3cReplicaRowStatus | read-create | current | This object identifies the action to enable or disable the replication. |
| 1.3.6.1.4.1.2011.10.10.2.1.11 | Tableh3cReplicaStateTable | not-accessible | current | This table contains some entity to show replication state. |
| 1.3.6.1.4.1.2011.10.10.2.1.11.1 | Rowh3cReplicaStateEntry | not-accessible | current | An entry containing show information applicable to the replication state. |
| 1.3.6.1.4.1.2011.10.10.2.1.11.1.1 | Columnh3cReplicaDelta | read-only | current | This object identifies the size of delta data after last sync. |
| 1.3.6.1.4.1.2011.10.10.2.1.11.1.2 | Columnh3cReplicaLastSyncTime | read-only | current | This object identifies the date and time when last sync is taken. |
| 1.3.6.1.4.1.2011.10.10.2.1.11.1.3 | Columnh3cReplicaNextSyncTime | read-only | current | This object identifies the date and time when next sync will be taken. |
| 1.3.6.1.4.1.2011.10.10.2.1.11.1.4 | Columnh3cReplicaSyncTotalSize | read-only | current | This object identifies how much data need to be synchronized to the replica resource for current replication. |
| 1.3.6.1.4.1.2011.10.10.2.1.11.1.5 | Columnh3cReplicaSyncCurPercentage | read-only | current | This object identifies how much data has been synchronized to the replica resource for current replication. |
| 1.3.6.1.4.1.2011.10.10.2.1.11.1.6 | Columnh3cReplicaSyncPerformance | read-only | current | This object identifies the performance of the synchronize. The unit is MB/s. |
| 1.3.6.1.4.1.2011.10.10.2.1.11.1.7 | Columnh3cReplicaRunStatus | read-only | current | This object identifies the state of the replica. |
| 1.3.6.1.4.1.2011.10.10.2.1.12 | Tableh3cCDRConfigTable | not-accessible | current | This table contains some entity to config Continuous Replication Resource. |
| 1.3.6.1.4.1.2011.10.10.2.1.12.1 | Rowh3cCDRConfigEntry | not-accessible | current | An entry containing some information applicable to Continuous Replication Resource of the logic volume. |
| 1.3.6.1.4.1.2011.10.10.2.1.12.1.1 | Columnh3cCDRLvIndex | not-accessible | current | This object identifies the source logic volume of the Continuous Replication Resource. The object identified by this index is the same object as identified by … |
| 1.3.6.1.4.1.2011.10.10.2.1.12.1.2 | Columnh3cCDRID | read-only | current | This object identifies the Continuous Replication Resource. |
| 1.3.6.1.4.1.2011.10.10.2.1.12.1.3 | Columnh3cCDRStatus | read-only | current | This object identifies the state of the Continuous Replication Resource. |
| 1.3.6.1.4.1.2011.10.10.2.1.12.1.4 | Columnh3cCDRTotalSize | read-only | current | This object identifies the total size of the Continuous Replication Resource. |
| 1.3.6.1.4.1.2011.10.10.2.1.12.1.5 | Columnh3cCDRFreeSize | read-only | current | This object identifies the free size of the Continuous Replication Resource. |
| 1.3.6.1.4.1.2011.10.10.2.1.12.1.6 | Columnh3cCDRSelectPolicy | read-create | current | This object describes the policy about allocating the space for Continuous Replication Resource. |
| 1.3.6.1.4.1.2011.10.10.2.1.12.1.7 | Columnh3cCDRRowStatus | read-create | current | This object identifies the action to create or delete the Continuous Replication Resource. |
| 1.3.6.1.4.1.2011.10.10.2.1.13 | Tableh3cCDRDistributeTable | not-accessible | current | This table contains some entity to config the distribution of Continuous Replication Resource. |
| 1.3.6.1.4.1.2011.10.10.2.1.13.1 | Rowh3cCDRDistributeEntry | not-accessible | current | An entry containing some information applicable to the distribution of Continuous Replication Resource. |
| 1.3.6.1.4.1.2011.10.10.2.1.13.1.1 | Columnh3cCDRDistLvIndex | not-accessible | current | This index is identical to h3cLvIndex in H3C-LOGIC-VOLUME-MIB. |
| 1.3.6.1.4.1.2011.10.10.2.1.13.1.2 | Columnh3cCDRRaidUuid | not-accessible | current | This index is identical to h3cRaidUuid in H3C-RAID-MIB. |
| 1.3.6.1.4.1.2011.10.10.2.1.13.1.3 | Columnh3cCDRRaidSize | read-create | current | This object identifies the size on the special raid distributed for the Continuous Replication Resource. |
| 1.3.6.1.4.1.2011.10.10.2.1.13.1.4 | Columnh3cCDRExtRowStatus | read-create | current | This object identifies the action to create the distribution for the Continuous Replication Resource. |
| 1.3.6.1.4.1.2011.10.10.2.1.14 | Tableh3cSafeCacheConfigTable | not-accessible | current | This table contains some entity to config SafeCache. |
| 1.3.6.1.4.1.2011.10.10.2.1.14.1 | Rowh3cSafeCacheConfigEntry | not-accessible | current | An entry containing some information applicable to SafeCache of the logic volume. |
| 1.3.6.1.4.1.2011.10.10.2.1.14.1.1 | Columnh3cSafeCacheLvIndex | not-accessible | current | This object identifies the source logic volume of the SafeCache. The object identified by this index is the same object as identified by the same value of h3cL… |
| 1.3.6.1.4.1.2011.10.10.2.1.14.1.2 | Columnh3cSafeCacheID | read-only | current | This object identifies a SafeCache. |
| 1.3.6.1.4.1.2011.10.10.2.1.14.1.3 | Columnh3cSafeCacheStatus | read-only | current | This object identifies the state of the SafeCache. |
| 1.3.6.1.4.1.2011.10.10.2.1.14.1.4 | Columnh3cSafeCacheTotalSize | read-only | current | This object identifies the total size of the SafeCache. The units is million bytes. |
| 1.3.6.1.4.1.2011.10.10.2.1.14.1.5 | Columnh3cSafeCacheFreeSize | read-only | current | This object identifies the free size of the SafeCache. The units is million bytes. |
| 1.3.6.1.4.1.2011.10.10.2.1.14.1.6 | Columnh3cSafeCacheSelectPolicy | read-create | current | This object describes the policy about allocating the space for SafeCache. |
| 1.3.6.1.4.1.2011.10.10.2.1.14.1.7 | Columnh3cSafeCacheThreshold | read-create | current | This object identifies the maximal percentage of date changed before data flushing. |
| 1.3.6.1.4.1.2011.10.10.2.1.14.1.8 | Columnh3cSafeCacheFlushTime | read-create | current | This object identifies the period during which the date can stay in cache before data flushing. The units is second. |
| 1.3.6.1.4.1.2011.10.10.2.1.14.1.9 | Columnh3cSafeCacheFlushCommand | read-create | current | This object identifies the number of commands when data flushing. |
| 1.3.6.1.4.1.2011.10.10.2.1.14.1.10 | Columnh3cSafeCacheSkipDupWrite | read-create | current | This object identifies skip duplicate write commands or not. |
| 1.3.6.1.4.1.2011.10.10.2.1.14.1.11 | Columnh3cSafeCacheRunStatus | read-only | current | This object identifies the run state of the SafeCache. |
| 1.3.6.1.4.1.2011.10.10.2.1.14.1.12 | Columnh3cSafeCacheSwitch | read-create | current | This object identifies the action of the SafeCache. The value 'suspend' means suspend the SafeCache. The value 'resume' means resume the SafeCache. |
| 1.3.6.1.4.1.2011.10.10.2.1.14.1.13 | Columnh3cSafeCacheRowStatus | read-create | current | This object identifies the action to create or delete the SafeCache. |
| 1.3.6.1.4.1.2011.10.10.2.1.15 | Tableh3cSafeCacheDistributeTable | not-accessible | current | This table contains some entity to config the SafeCache resource. |
| 1.3.6.1.4.1.2011.10.10.2.1.15.1 | Rowh3cSafeCacheDistributeEntry | not-accessible | current | An entry containing some information applicable to SafeCache resource of the logic volume. |
| 1.3.6.1.4.1.2011.10.10.2.1.15.1.1 | Columnh3cSafeCacheDistLvIndex | not-accessible | current | This index is identical to h3cLvIndex in H3C-LOGIC-VOLUME-MIB. |
| 1.3.6.1.4.1.2011.10.10.2.1.15.1.2 | Columnh3cSafeCacheRaidUuid | not-accessible | current | This index is identical to h3cRaidUuid in H3C-RAID-MIB. |
| 1.3.6.1.4.1.2011.10.10.2.1.15.1.3 | Columnh3cSafeCacheRaidSize | read-create | current | This object identifies the size on the special raid distributed for the SafeCache resource. |
| 1.3.6.1.4.1.2011.10.10.2.1.15.1.4 | Columnh3cSafeCacheExtRowStatus | read-create | current | This object identifies the action to create the distribution for the SafeCache resource. |
| 1.3.6.1.4.1.2011.10.10.2.1.16 | Tableh3cMirrorConfigTable | not-accessible | current | This table contains some entity to config mirror. |
| 1.3.6.1.4.1.2011.10.10.2.1.16.1 | Rowh3cMirrorConfigEntry | not-accessible | current | An entry containing some information applicable to mirror for the logic volume. |
| 1.3.6.1.4.1.2011.10.10.2.1.16.1.1 | Columnh3cMirrorLvIndex | not-accessible | current | This object identifies the source logic volume of the mirror. The object identified by this index is the same object as identified by the same value of h3cLvin… |
| 1.3.6.1.4.1.2011.10.10.2.1.16.1.2 | Columnh3cMirrorType | read-only | current | This object identifies the type of the mirror. |
| 1.3.6.1.4.1.2011.10.10.2.1.16.1.3 | Columnh3cMirrorStatus | read-only | current | This object identifies the state of the mirror resource. |
| 1.3.6.1.4.1.2011.10.10.2.1.16.1.4 | Columnh3cMirrorName | read-create | current | This object identifies the name of the mirror resource. it is used when promote mirror resource. |
| 1.3.6.1.4.1.2011.10.10.2.1.16.1.5 | Columnh3cMirrorSyncPercentage | read-only | current | This object identifies the percentage of the mirror sync. |
| 1.3.6.1.4.1.2011.10.10.2.1.16.1.6 | Columnh3cMirrorSyncPerformance | read-only | current | This object identifies the performance of the mirror sync. The unit is MB/S |
| 1.3.6.1.4.1.2011.10.10.2.1.16.1.7 | Columnh3cMirrorDelta | read-only | current | This object identifies size of delta data after the last mirror sync. |
| 1.3.6.1.4.1.2011.10.10.2.1.16.1.8 | Columnh3cMirrorRaidType | read-create | current | This object identifies the raid type of the mirror resource. |
| 1.3.6.1.4.1.2011.10.10.2.1.16.1.9 | Columnh3cMirrorSelectPolicy | read-create | current | This object describes the policy about allocating the space for mirror resource. |
| 1.3.6.1.4.1.2011.10.10.2.1.16.1.10 | Columnh3cMirrorSwitch | read-create | current | This object identifies the state of the mirror. The value of 'sync' means synchronize mannually. The value of 'swap' means switch the roles of the primary reso… |
| 1.3.6.1.4.1.2011.10.10.2.1.16.1.11 | Columnh3cMirrorExtendRaidUuid | read-create | current | This object identifies the raid of the mirror resource when the primary logic volume resource is extended. |
| 1.3.6.1.4.1.2011.10.10.2.1.16.1.12 | Columnh3cMirrorRowStatus | read-create | current | This object identifies the action to create or delete the mirror resource. |
| 1.3.6.1.4.1.2011.10.10.2.1.17 | Tableh3cMirrorDistributeTable | not-accessible | current | This table contains some entity to config the mirror resource. |
| 1.3.6.1.4.1.2011.10.10.2.1.17.1 | Rowh3cMirrorDistributeEntry | not-accessible | current | An entry containing some information applicable to mirror resource for the logic volume. |
| 1.3.6.1.4.1.2011.10.10.2.1.17.1.1 | Columnh3cMirrorDistLvIndex | not-accessible | current | This index is identical to h3cLvIndex in H3C-LOGIC-VOLUME-MIB. |
| 1.3.6.1.4.1.2011.10.10.2.1.17.1.2 | Columnh3cMirrorRaidUuid | not-accessible | current | This index is identical to h3cRaidUuid in H3C-RAID-MIB. |
| 1.3.6.1.4.1.2011.10.10.2.1.17.1.3 | Columnh3cMirrorRaidSize | read-create | current | This object identifies the size on the special raid distributed for the mirror resource. |
| 1.3.6.1.4.1.2011.10.10.2.1.17.1.4 | Columnh3cMirrorExtRowStatus | read-create | current | This object identifies the action to create or delete the distribution for the mirror resource. |