H3C-TE-TUNNEL-MIB
49 objects
This MIB contains managed object definitions for the Multiprotocol Label Switching (MPLS) Te Tunnel.
Imported Objects
| A3COM-HUAWEI-OID-MIB | h3cCommon |
| MPLS-TC-STD-MIB | MplsExtendedTunnelId MplsLabel MplsTunnelIndex MplsTunnelInstanceIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | RowPointer |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.43.45.1.10.2.115 | Identityh3cTeTunnel | This MIB contains managed object definitions for the Multiprotocol Label Switching (MPLS) Te Tunnel. | ||
| 1.3.6.1.4.1.43.45.1.10.2.115.1 | Nodeh3cTeTunnelScalars | |||
| 1.3.6.1.4.1.43.45.1.10.2.115.1.1 | Scalarh3cTeTunnelMaxTunnelIndex | read-only | current | The max value of tunnel id is permitted configure on the device. |
| 1.3.6.1.4.1.43.45.1.10.2.115.2 | Nodeh3cTeTunnelObjects | |||
| 1.3.6.1.4.1.43.45.1.10.2.115.2.1 | Tableh3cTeTunnelStaticCrlspTable | not-accessible | current | This table contains information for static-crlsp, and through this to get detail information about this static-crlsp. Only support transit LSR and egress LSR. |
| 1.3.6.1.4.1.43.45.1.10.2.115.2.1.1 | Rowh3cTeTunnelStaticCrlspEntry | not-accessible | current | The entry in this table describes static-crlsp information. |
| 1.3.6.1.4.1.43.45.1.10.2.115.2.1.1.1 | Columnh3cTeTunnelStaticCrlspInLabel | not-accessible | current | This is unique label value that manualy assigned. Uniquely identifies a static-crlsp. Managers should use this to obtain detail static-crlsp information. |
| 1.3.6.1.4.1.43.45.1.10.2.115.2.1.1.2 | Columnh3cTeTunnelStaticCrlspName | read-only | current | The unique name assigned to the static-crlsp. |
| 1.3.6.1.4.1.43.45.1.10.2.115.2.1.1.3 | Columnh3cTeTunnelStaticCrlspStatus | read-only | current | Indicates the actual status of this static-crlsp, The value must be up when the static-crlsp status is up and the value must be down when the static-crlsp stat… |
| 1.3.6.1.4.1.43.45.1.10.2.115.2.1.1.4 | Columnh3cTeTunnelStaticCrlspRole | read-only | current | This value indicate the role of this static-crlsp. This value must be transit at transit point of the tunnel, and tail at terminating point of the tunnel. |
| 1.3.6.1.4.1.43.45.1.10.2.115.2.1.1.5 | Columnh3cTeTunnelStaticCrlspXCPointer | read-only | current | This pointer unique identify a row of mplsXCTable. This value should be zeroDotZero when the static-crlsp is down. The mplsXCTable identifies the segments that… |
| 1.3.6.1.4.1.43.45.1.10.2.115.2.2 | Tableh3cTeTunnelCoTable | not-accessible | current | This table contains information for Co-routed reverse crlsp and infomation of Co-routed bidirectional Tunnel Interface. If h3cCorouteTunnelLspInstance is zero,… |
| 1.3.6.1.4.1.43.45.1.10.2.115.2.2.1 | Rowh3cTeTunnelCoEntry | not-accessible | current | The entry in this table describes Co-routed infomation of bidirectional Tunnel Interface and reserver lsp information. |
| 1.3.6.1.4.1.43.45.1.10.2.115.2.2.1.1 | Columnh3cTeTunnelCoIndex | not-accessible | current | Uniquely identifies a set of tunnel instances between a pair of ingress and egress LSRs that specified at originating point. This value should be equal to the … |
| 1.3.6.1.4.1.43.45.1.10.2.115.2.2.1.2 | Columnh3cTeTunnelCoLspInstance | not-accessible | current | When obtain infomation of Co-routed bidirectional Tunnel Interface, this vlaue should be zero. And this value must be LspID to obtain reverse crlsp information… |
| 1.3.6.1.4.1.43.45.1.10.2.115.2.2.1.3 | Columnh3cTeTunnelCoIngressLSRId | not-accessible | current | Identity the ingress LSR associated with this tunnel instance. This vlaue is equal to the LsrID of originating endpoint. |
| 1.3.6.1.4.1.43.45.1.10.2.115.2.2.1.4 | Columnh3cTeTunnelCoEgressLSRId | not-accessible | current | Identity of the egress LSR associated with this tunnel instance. This vlaue is equal to the LsrID of terminating point. |
| 1.3.6.1.4.1.43.45.1.10.2.115.2.2.1.5 | Columnh3cTeTunnelCoBiMode | read-only | current | This vlaue indicated the bidirection mode of tunnel interface. The valuemust be coroutedActive at the originating point of the tunnel and coroutedPassive at th… |
| 1.3.6.1.4.1.43.45.1.10.2.115.2.2.1.6 | Columnh3cTeTunnelCoReverseLspInstance | read-only | current | This value indicated the reverse lsp instance, and should be equal to obverse lsp instance. |
| 1.3.6.1.4.1.43.45.1.10.2.115.2.2.1.7 | Columnh3cTeTunnelCoReverseLspXCPointer | read-only | current | This pointer unique index to mplsXCTable of the reverse lsp. The mplsXCTable identifies the segments that compose this tunnel, their characteristics, and relat… |
| 1.3.6.1.4.1.43.45.1.10.2.115.2.3 | Tableh3cTeTunnelPsTable | not-accessible | current | This table defines some objects for managers to obtain TE tunnel Protection Switching group current status information. |
| 1.3.6.1.4.1.43.45.1.10.2.115.2.3.1 | Rowh3cTeTunnelPsEntry | not-accessible | current | The entry in this table describes TE tunnel Protection Switching group infromation. |
| 1.3.6.1.4.1.43.45.1.10.2.115.2.3.1.1 | Columnh3cTeTunnelPsIndex | not-accessible | current | Uniquely identifies a TE tunnel Protection Switching group instance. This value must be equal to the tunnel id of work tunnel instance. |
| 1.3.6.1.4.1.43.45.1.10.2.115.2.3.1.2 | Columnh3cTeTunnelPsIngressLSRId | not-accessible | current | Identity the ingress LSR associated with work tunnel instance. |
| 1.3.6.1.4.1.43.45.1.10.2.115.2.3.1.3 | Columnh3cTeTunnelPsEgressLSRId | not-accessible | current | Identity of the egress LSR associated with work tunnel instance. |
| 1.3.6.1.4.1.43.45.1.10.2.115.2.3.1.4 | Columnh3cTeTunnelPsProtectIndex | read-only | current | Uniquely identifies a TE tunnel Protection Switching group instance. This value must be equal to the tunnel id of TE tunnel Protection Switching group instance. |
| 1.3.6.1.4.1.43.45.1.10.2.115.2.3.1.5 | Columnh3cTeTunnelPsProtectIngressLSRId | read-only | current | Identity the ingress LSR associated with TE tunnel Protection Switching group instance. |
| 1.3.6.1.4.1.43.45.1.10.2.115.2.3.1.6 | Columnh3cTeTunnelPsProtectEgressLSRId | read-only | current | Identity of the egress LSR associated with TE tunnel Protection Switching group instance. |
| 1.3.6.1.4.1.43.45.1.10.2.115.2.3.1.7 | Columnh3cTeTunnelPsProtectType | read-only | current | This value indicated TE tunnel Protection Switching group type. The default value is oneToOne. |
| 1.3.6.1.4.1.43.45.1.10.2.115.2.3.1.8 | Columnh3cTeTunnelPsRevertiveMode | read-only | current | This value indicated protect switch mode. The value must be revertive or nonRevertive, default value is revertive. |
| 1.3.6.1.4.1.43.45.1.10.2.115.2.3.1.9 | Columnh3cTeTunnelPsWtrTime | read-only | current | The cycle time that switch to protect tunnel. |
| 1.3.6.1.4.1.43.45.1.10.2.115.2.3.1.10 | Columnh3cTeTunnelPsHoldOffTime | read-only | current | This value is switchback delay time. When detected the work path fault, switch to protect path after this time. |
| 1.3.6.1.4.1.43.45.1.10.2.115.2.3.1.11 | Columnh3cTeTunnelPsSwitchMode | read-only | current | This value indicated TE tunnel Protection Switching group switch mode. |
| 1.3.6.1.4.1.43.45.1.10.2.115.2.3.1.12 | Columnh3cTeTunnelPsWorkPathStatus | read-only | current | This value indicates work path status. none, noDefect, inDefect will be used. |
| 1.3.6.1.4.1.43.45.1.10.2.115.2.3.1.13 | Columnh3cTeTunnelPsProtectPathStatus | read-only | current | This value indicates protect path status. none, noDefect, inDefect(3) will be used. |
| 1.3.6.1.4.1.43.45.1.10.2.115.2.3.1.14 | Columnh3cTeTunnelPsSwitchResult | read-only | current | This value indicated current using path is work path or protect path. |
| 1.3.6.1.4.1.43.45.1.10.2.115.3 | Nodeh3cTeTunnelNotifications | |||
| 1.3.6.1.4.1.43.45.1.10.2.115.3.0 | Nodeh3cTeTunnelNotificationsPrefix | |||
| 1.3.6.1.4.1.43.45.1.10.2.115.3.0.1 | Notificationh3cTeTunnelPsSwitchWtoP | current | This notification is generated when protect workgroup switch from work tunnel to protect tunnel. | |
| 1.3.6.1.4.1.43.45.1.10.2.115.3.0.2 | Notificationh3cTeTunnelPsSwitchPtoW | current | This notification is generated when protect workgroup switch from protect tunnel to work tunnel. | |
| 1.3.6.1.4.1.43.45.1.10.2.115.4 | Nodeh3cTeTunnelConformance | |||
| 1.3.6.1.4.1.43.45.1.10.2.115.4.1 | Nodeh3cTeTunnelCompliances | |||
| 1.3.6.1.4.1.43.45.1.10.2.115.4.1.1 | Complianceh3cTeTunnelCompliance | current | The compliance statement for SNMP. | |
| 1.3.6.1.4.1.43.45.1.10.2.115.4.2 | Nodeh3cTeTunnelGroups | |||
| 1.3.6.1.4.1.43.45.1.10.2.115.4.2.1 | Grouph3cTeTunnelNotificationsGroup | current | This group contains MPLS Te Tunnel traps. | |
| 1.3.6.1.4.1.43.45.1.10.2.115.4.2.2 | Grouph3cTeTunnelScalarsGroup | current | Scalar object needed to implement MPLS te tunnels. | |
| 1.3.6.1.4.1.43.45.1.10.2.115.4.2.3 | Grouph3cTeTunnelStaticCrlspGroup | current | Objects for quering static-crlsp information. | |
| 1.3.6.1.4.1.43.45.1.10.2.115.4.2.4 | Grouph3cTeTunnelCorouteGroup | current | Objects for quering Co-routed reverse crlsp information. | |
| 1.3.6.1.4.1.43.45.1.10.2.115.4.2.5 | Grouph3cTeTunnelPsGroup | current | Objects for quering protect workgroup information. |