H3C-TUNNEL-MIB
76 objects
This MIB contains objects to Manage configuration and Monitor tunnel.
Imported Objects
| HUAWEI-3COM-OID-MIB | h3cCommon |
| IF-MIB | ifIndex InterfaceIndex InterfaceIndexOrZero |
| INET-ADDRESS-MIB | InetAddress InetAddressType |
| IPV6-FLOW-LABEL-MIB | IPv6FlowLabelOrAny |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | RowStatus TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2011.10.2.53 | Identityh3cTunnel | This MIB contains objects to Manage configuration and Monitor tunnel. | ||
| 1.3.6.1.4.1.2011.10.2.53.1 | Nodeh3cTunnelMIBObjects | |||
| 1.3.6.1.4.1.2011.10.2.53.1.1 | Nodeh3cTunnelTables | |||
| 1.3.6.1.4.1.2011.10.2.53.1.1.1 | Tableh3cTunnelIfTable | not-accessible | current | The (conceptual) table containing information on configured tunnels. |
| 1.3.6.1.4.1.2011.10.2.53.1.1.1.1 | Rowh3cTunnelIfEntry | not-accessible | current | An entry (conceptual row) containing the information on a particular configured tunnel. |
| 1.3.6.1.4.1.2011.10.2.53.1.1.1.1.3 | Columnh3cTunnelIfEncapsMethod | read-write | current | The encapsulation method used by the tunnel. |
| 1.3.6.1.4.1.2011.10.2.53.1.1.1.1.4 | Columnh3cTunnelIfHopLimit | read-only | current | The IPv4 TTL or IPv6 Hop Limit to use in the outer IP header. A value of 0 indicates that the value is copied from the payload's header. |
| 1.3.6.1.4.1.2011.10.2.53.1.1.1.1.5 | Columnh3cTunnelIfSecurity | read-only | current | The method used by the tunnel to secure the outer IP header. The value ipsec indicates that IPsec is used between the tunnel endpoints for authentication or en… |
| 1.3.6.1.4.1.2011.10.2.53.1.1.1.1.6 | Columnh3cTunnelIfTOS | read-only | current | The method used to set the high 6 bits (the differentiated services codepoint) of the IPv4 TOS or IPv6 Traffic Class in the outer IP header. A value of -1 indi… |
| 1.3.6.1.4.1.2011.10.2.53.1.1.1.1.7 | Columnh3cTunnelIfFlowLabel | read-only | current | The method used to set the IPv6 Flow Label value. This object need not be present in rows where h3cTunnelIfAddressType indicates the tunnel is not over IPv6. A… |
| 1.3.6.1.4.1.2011.10.2.53.1.1.1.1.8 | Columnh3cTunnelIfAddressType | read-write | current | The type of address in the corresponding h3cTunnelIfLocalInetAddress and h3cTunnelIfRemoteInetAddress objects. |
| 1.3.6.1.4.1.2011.10.2.53.1.1.1.1.9 | Columnh3cTunnelIfLocalInetAddress | read-write | current | The address of the local endpoint of the tunnel (i.e., the source address used in the outer IP header). If the address is unknown, the value is 0.0.0.0 for IPv… |
| 1.3.6.1.4.1.2011.10.2.53.1.1.1.1.10 | Columnh3cTunnelIfRemoteInetAddress | read-write | current | The address of the remote endpoint of the tunnel (i.e., the destination address used in the outer IP header). If the address is unknown or the tunnel is not a … |
| 1.3.6.1.4.1.2011.10.2.53.1.1.1.1.11 | Columnh3cTunnelIfEncapsLimit | read-only | current | The maximum number of additional encapsulations permitted for packets undergoing encapsulation at this node. A value of -1 indicates that no limit is present (… |
| 1.3.6.1.4.1.2011.10.2.53.1.1.3 | Tableh3cTunnelInetConfigTable | not-accessible | current | The (conceptual) table containing information on configured tunnels. This table can be used to map a set of tunnel endpoints to the associated ifIndex value. I… |
| 1.3.6.1.4.1.2011.10.2.53.1.1.3.1 | Rowh3cTunnelInetConfigEntry | not-accessible | current | An entry (conceptual row) containing the information on a particular configured tunnel. |
| 1.3.6.1.4.1.2011.10.2.53.1.1.3.1.1 | Columnh3cTunnelInetConfigSlot | not-accessible | current | Slot number. h3cTunnelInetConfigSlot, h3cTunnelInetConfigSubSlot and h3cTunnelInetConfigTunnNum describe a tunnel interface. For Example, interface tunnel 0/0/… |
| 1.3.6.1.4.1.2011.10.2.53.1.1.3.1.2 | Columnh3cTunnelInetConfigSubSlot | not-accessible | current | Sub slot number. As described in h3cTunnelInetConfigSlot's description. |
| 1.3.6.1.4.1.2011.10.2.53.1.1.3.1.3 | Columnh3cTunnelInetConfigTunnNum | not-accessible | current | Tunnel number. As described in h3cTunnelInetConfigSlot's description. |
| 1.3.6.1.4.1.2011.10.2.53.1.1.3.1.6 | Columnh3cTunnelInetConfigIfIndex | read-only | current | If the value of h3cTunnelInetConfigStatus for this row is active, then this object contains the value of ifIndex corresponding to the tunnel interface. A value… |
| 1.3.6.1.4.1.2011.10.2.53.1.1.3.1.7 | Columnh3cTunnelInetConfigStatus | read-create | current | The status of this row, by which new entries may be created, or old entries deleted from this table. The agent need not support setting this object to createAn… |
| 1.3.6.1.4.1.2011.10.2.53.1.1.4 | Tableh3cTunnelEviTable | not-accessible | current | The (conceptual) table containing information on configured EVI-Tunnel. |
| 1.3.6.1.4.1.2011.10.2.53.1.1.4.1 | Rowh3cTunnelEviEntry | not-accessible | current | An entry (conceptual row) containing the information on a particular configured EVI-Tunnel. |
| 1.3.6.1.4.1.2011.10.2.53.1.1.4.1.1 | Columnh3cTunnelEviTunnNum | not-accessible | current | Tunnel number. An identifier used to distinguish between multiple tunnels. |
| 1.3.6.1.4.1.2011.10.2.53.1.1.4.1.2 | Columnh3cTunnelEviIfIndex | read-only | current | A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface su… |
| 1.3.6.1.4.1.2011.10.2.53.1.1.4.1.3 | Columnh3cTunnelEviStatus | read-create | current | The status of this row, by which new entries may be created, or old entries deleted from this table. The agent need not support setting this object to createAn… |
| 1.3.6.1.4.1.2011.10.2.53.1.1.4.1.4 | Columnh3cTunnelEviAddressType | read-create | current | The type of address in the corresponding h3cTunnelEviLocalAddr objects. Can not be modified after creation. |
| 1.3.6.1.4.1.2011.10.2.53.1.1.4.1.5 | Columnh3cTunnelEviLocalAddr | read-create | current | The address of the local endpoint of the tunnel (i.e., the source address used in the outer IP header). The type of this object is given by h3cTunnelEviAddress… |
| 1.3.6.1.4.1.2011.10.2.53.1.1.4.1.6 | Columnh3cTunnelEviNetworkID | read-create | current | The method used to assign a network ID to an EVI-Tunnel interface. Assign the same network ID to the EVI-Tunnel interfaces of all edge devices in an EVI networ… |
| 1.3.6.1.4.1.2011.10.2.53.1.1.4.1.7 | Columnh3cTunnelEviKeepaliveInterval | read-create | current | The method used to assign the keepalive interval. |
| 1.3.6.1.4.1.2011.10.2.53.1.1.4.1.8 | Columnh3cTunnelEviKeepaliveTimes | read-create | current | The method used to assign the keepalive maximum number of consecutive keepalive failures that are allowed. |
| 1.3.6.1.4.1.2011.10.2.53.1.1.5 | Tableh3cTunnelEviLinkTable | not-accessible | current | The (conceptual) table containing information on configured EVI-Link. |
| 1.3.6.1.4.1.2011.10.2.53.1.1.5.1 | Rowh3cTunnelEviLinkEntry | not-accessible | current | An entry (conceptual row) containing the information on a particular configured EVI-Link. |
| 1.3.6.1.4.1.2011.10.2.53.1.1.5.1.1 | Columnh3cTunnelEviLinkNum | not-accessible | current | EVI-Link number. |
| 1.3.6.1.4.1.2011.10.2.53.1.1.5.1.2 | Columnh3cTunnelEviLinkIfIndex | read-only | current | A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface su… |
| 1.3.6.1.4.1.2011.10.2.53.1.1.5.1.3 | Columnh3cTunnelEviLinkAddressType | read-only | current | The type of address in the corresponding h3cTunnelEviLinkRemoteAddr objects. Can not be modified after creation. |
| 1.3.6.1.4.1.2011.10.2.53.1.1.5.1.4 | Columnh3cTunnelEviLinkRemoteAddr | read-only | current | The address of the remote endpoint of the tunnel (i.e., the destination address used in the outer IP header). |
| 1.3.6.1.4.1.2011.10.2.53.1.1.6 | Tableh3cTunnelGreTable | not-accessible | current | The (conceptual) table containing information on configured Gre-Tunnel. |
| 1.3.6.1.4.1.2011.10.2.53.1.1.6.1 | Rowh3cTunnelGreEntry | not-accessible | current | An entry (conceptual row) containing the information on a particular configured Gre-Tunnel. |
| 1.3.6.1.4.1.2011.10.2.53.1.1.6.1.1 | Columnh3cTunnelGreTunnNum | not-accessible | current | Tunnel number. An identifier used to distinguish between multiple tunnels. |
| 1.3.6.1.4.1.2011.10.2.53.1.1.6.1.2 | Columnh3cTunnelGreTunnIfIndex | read-only | current | A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface su… |
| 1.3.6.1.4.1.2011.10.2.53.1.1.6.1.3 | Columnh3cTunnelGreAddressType | read-create | current | The type of address in the corresponding h3cTunnelGreLocalAddr and h3cTunnelGreRemoteAddr objects. |
| 1.3.6.1.4.1.2011.10.2.53.1.1.6.1.4 | Columnh3cTunnelGreLocalAddr | read-create | current | The address of the local endpoint of the tunnel (i.e., the source address used in the outer IP header). |
| 1.3.6.1.4.1.2011.10.2.53.1.1.6.1.5 | Columnh3cTunnelGreRemoteAddr | read-create | current | The address of the remote endpoint of the tunnel (i.e., the destination address used in the outer IP header). |
| 1.3.6.1.4.1.2011.10.2.53.1.1.6.1.6 | Columnh3cTunnelGreKeepaliveEnabled | read-create | current | This MIB object specifies whether or not keepalive is used. A value of true indicates that keepalive SHOULD be used. When keepalive is not be used, the value o… |
| 1.3.6.1.4.1.2011.10.2.53.1.1.6.1.7 | Columnh3cTunnelGreKeepaliveInterval | read-create | current | The method used to assign the keepalive interval. The value is zero when keepalive is not used. The valid value is from 1 to 32767, when keepalive is used. |
| 1.3.6.1.4.1.2011.10.2.53.1.1.6.1.8 | Columnh3cTunnelGreKeepaliveTimes | read-create | current | The method used to assign the keepalive maximum number of consecutive keepalive failures that are allowed. The value is zero when keepalive is not used. The va… |
| 1.3.6.1.4.1.2011.10.2.53.1.1.6.1.9 | Columnh3cTunnelGreSlbgGroupNum | read-create | current | The method used to assign the service-loopback-group. |
| 1.3.6.1.4.1.2011.10.2.53.1.1.6.1.10 | Columnh3cTunnelGreTunnStatus | read-create | current | The status of this row, by which new entries may be created, or old entries deleted from this table. The agent need not support setting this object to createAn… |
| 1.3.6.1.4.1.2011.10.2.53.1.1.7 | Tableh3cTunnelVxlanIfTable | not-accessible | current | The (conceptual) table containing information on configured Vxlan-Tunnel. |
| 1.3.6.1.4.1.2011.10.2.53.1.1.7.1 | Rowh3cTunnelVxlanIfEntry | not-accessible | current | An entry (conceptual row) containing the information on a particular configured Vxlan-Tunnel. |
| 1.3.6.1.4.1.2011.10.2.53.1.1.7.1.1 | Columnh3cTunnelVxlanIfTunnNum | not-accessible | current | Tunnel number. An identifier used to distinguish between multiple tunnels. |
| 1.3.6.1.4.1.2011.10.2.53.1.1.7.1.2 | Columnh3cTunnelVxlanTunnIfIndex | read-only | current | A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface su… |
| 1.3.6.1.4.1.2011.10.2.53.1.1.7.1.3 | Columnh3cTunnelVxlanIfAddressType | read-create | current | The type of address in the corresponding h3cTunnelVxlanIfLocalAddr and h3cTunnelVxlanIfRemoteAddr objects. |
| 1.3.6.1.4.1.2011.10.2.53.1.1.7.1.4 | Columnh3cTunnelVxlanIfLocalAddr | read-create | current | The address of the local endpoint of the tunnel (i.e., the source address used in the outer IP header). |
| 1.3.6.1.4.1.2011.10.2.53.1.1.7.1.5 | Columnh3cTunnelVxlanIfRemoteAddr | read-create | current | The address of the remote endpoint of the tunnel (i.e., the destination address used in the outer IP header). |
| 1.3.6.1.4.1.2011.10.2.53.1.1.7.1.6 | Columnh3cTunnelVxlanIfStatus | read-create | current | The status of this row, by which new entries may be created, or old entries deleted from this table. The agent need not support setting this object to createAn… |
| 1.3.6.1.4.1.2011.10.2.53.1.1.8 | Nodeh3cTunnelVxlanConfigGroup | |||
| 1.3.6.1.4.1.2011.10.2.53.1.1.8.1 | Scalarh3cTunnelVxlanUdpPort | read-write | current | The UDP port number for Vxlan Tunnels. |
| 1.3.6.1.4.1.2011.10.2.53.1.1.8.2 | Scalarh3cTunnelVxlanDropWrongCksmPkt | read-write | current | Whether or not dropping invalid UDP chesksum Vxlan packet. |
| 1.3.6.1.4.1.2011.10.2.53.1.1.8.3 | Scalarh3cTunnelVxlanDropVlanTagPkt | read-write | current | Whether or not dropping Vxlan packet with inner VLAN tag. |
| 1.3.6.1.4.1.2011.10.2.53.1.1.9 | Nodeh3cTunnelAvailableIDGroup | |||
| 1.3.6.1.4.1.2011.10.2.53.1.1.9.1 | Scalarh3cTunnelAvailableID | read-only | current | The available tunnel ID. A value of -1 indicates that there is no available tunnel ID. |
| 1.3.6.1.4.1.2011.10.2.53.1.1.10 | Tableh3cTunnelTotalNumTable | not-accessible | current | Total number of a particular method tunnel. |
| 1.3.6.1.4.1.2011.10.2.53.1.1.10.1 | Rowh3cTunnelTotalNumEntry | not-accessible | current | Total number of a particular method tunnel. |
| 1.3.6.1.4.1.2011.10.2.53.1.1.10.1.1 | Columnh3cTunnelEncapsMethod | not-accessible | current | The encapsulation method used by the tunnel. |
| 1.3.6.1.4.1.2011.10.2.53.1.1.10.1.2 | Columnh3cTunnelTotalNum | read-only | current | Total number of a particular method tunnel. |
| 1.3.6.1.4.1.2011.10.2.53.1.1.11 | Tableh3cTunnelNvgreIfTable | not-accessible | current | The (conceptual) table containing information on configured Nvgre-Tunnel. |
| 1.3.6.1.4.1.2011.10.2.53.1.1.11.1 | Rowh3cTunnelNvgreIfEntry | not-accessible | current | An entry (conceptual row) containing the information on a particular configured Nvgre-Tunnel. |
| 1.3.6.1.4.1.2011.10.2.53.1.1.11.1.1 | Columnh3cTunnelNvgreIfTunnNum | not-accessible | current | Tunnel number. An identifier used to distinguish between multiple tunnels. |
| 1.3.6.1.4.1.2011.10.2.53.1.1.11.1.2 | Columnh3cTunnelNvgreTunnIfIndex | read-only | current | A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface su… |
| 1.3.6.1.4.1.2011.10.2.53.1.1.11.1.3 | Columnh3cTunnelNvgreIfAddressType | read-create | current | The type of address in the corresponding h3cTunnelNvgreIfLocalAddr and h3cTunnelNvgreIfRemoteAddr objects. |
| 1.3.6.1.4.1.2011.10.2.53.1.1.11.1.4 | Columnh3cTunnelNvgreIfLocalAddr | read-create | current | The address of the local endpoint of the tunnel (i.e., the source address used in the outer IP header). |
| 1.3.6.1.4.1.2011.10.2.53.1.1.11.1.5 | Columnh3cTunnelNvgreIfRemoteAddr | read-create | current | The address of the remote endpoint of the tunnel (i.e., the destination address used in the outer IP header). |
| 1.3.6.1.4.1.2011.10.2.53.1.1.11.1.6 | Columnh3cTunnelNvgreIfStatus | read-create | current | The status of this row, by which new entries may be created, or old entries deleted from this table. The agent need not support setting this object to createAn… |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| H3cTunnelType | INTEGER { other(1), direct(2), gre(3), minimal(4), l2tp(5), pptp(6), l2f(7), udp(8), atmp(9), msdp(10), sixToFour(11), sixOverFour(12), isatap(13), teredo(14), tunnelModeReserve(35), tunnelModeIPv4Gre(36), tunnelModeIPv6Gre(37), tunnelModeIPv4IPv4(38), tunnelModeIPv4IPv6Config(39), tunnelModeIPv4IPv6Auto(40), tunnelModeIPv4IPv66to4(41), tunnelModeIPv4IPv6Isatap(42), tunnelModeIPv6IPv4(43), tunnelModeIPv6IPv6(44), tunnelModeIPv4UdpDVPN(45), tunnelModeIPv4GreDVPN(46), tunnelModeIPv6UdpDVPN(47), tunnelModeIPv6GreDVPN(48), tunnelModeCrLsp(49), tunnelModeMax(50), tunnelModeIPv4UdpVxlan(51), tunnelModeIPv6UdpVxlan(52), tunnelModeIPv4NVGRE(53), tunnelModeIPv6NVGRE(54) } | current | Tunnel type definition. |