H3C-WLAN-FLEXAPP-CFG-MIB
132 objects
This MIB provides information about WLAN application configuration.
Imported Objects
| H3C-DOT11-REF-MIB | h3cDot11 |
| SNMPv2-SMI | Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE |
| SNMPv2-TC | MacAddress TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2011.10.2.75.19 | Identityh3cWlanFlexAppCFG | This MIB provides information about WLAN application configuration. | ||
| 1.3.6.1.4.1.2011.10.2.75.19.1 | Nodeh3cWlanModuleConfigGroup | |||
| 1.3.6.1.4.1.2011.10.2.75.19.1.1 | Tableh3cWlanModuleConfigTable | not-accessible | current | Administrators must configure module parameters for a module to operate. |
| 1.3.6.1.4.1.2011.10.2.75.19.1.1.1 | Rowh3cWlanModuleConfigEntry | not-accessible | current | Each entry contains module configuration information. |
| 1.3.6.1.4.1.2011.10.2.75.19.1.1.1.1 | Columnh3cWlanAPSerialID | not-accessible | current | This object represents the serial ID of an AP. |
| 1.3.6.1.4.1.2011.10.2.75.19.1.1.1.2 | Columnh3cWlanModuleID | not-accessible | current | This object represents the module ID of a module. |
| 1.3.6.1.4.1.2011.10.2.75.19.1.1.1.3 | Columnh3cWlanModuleType | read-write | current | This object represents the type of a module. |
| 1.3.6.1.4.1.2011.10.2.75.19.1.1.1.4 | Columnh3cWlanModuleStatus | read-write | current | This object represents the enabled or disabled status of a module. |
| 1.3.6.1.4.1.2011.10.2.75.19.1.1.1.5 | Columnh3cWlanModuleReset | read-write | current | When read the value from the node none: Represents the module has been rebooted and the status of the module is normal. When write the value to the node reboot… |
| 1.3.6.1.4.1.2011.10.2.75.19.1.1.1.6 | Columnh3cWlanModuleRstFac | read-write | current | When read the value from the node none: Represents the module has been restored and the status of the module is normal. When write the value to the node restor… |
| 1.3.6.1.4.1.2011.10.2.75.19.1.1.1.7 | Columnh3cWlanModuleUpWareStatus | read-write | current | This object represents the enabled or disabled status of module auto update. |
| 1.3.6.1.4.1.2011.10.2.75.19.1.1.1.8 | Columnh3cWlanModuleTxPower | read-write | current | This object represents the packet transmit power. |
| 1.3.6.1.4.1.2011.10.2.75.19.1.1.1.9 | Columnh3cWlanModuleManualUpdate | read-write | current | This object represents the file path for module firmware updating. |
| 1.3.6.1.4.1.2011.10.2.75.19.1.2 | Tableh3cWlanModuleInfoTable | not-accessible | current | The table contains information about each module of an AP. |
| 1.3.6.1.4.1.2011.10.2.75.19.1.2.1 | Rowh3cWlanModuleInfoEntry | not-accessible | current | Each entry contains IOT module information. |
| 1.3.6.1.4.1.2011.10.2.75.19.1.2.1.1 | Columnh3cDot11IOTAPSerialID | not-accessible | current | This object represents the serial ID of an AP. |
| 1.3.6.1.4.1.2011.10.2.75.19.1.2.1.2 | Columnh3cDot11IOTModuleID | not-accessible | current | This object represents a module. |
| 1.3.6.1.4.1.2011.10.2.75.19.1.2.1.3 | Columnh3cDot11IOTModuleType | read-only | current | This object represents the type of a module. |
| 1.3.6.1.4.1.2011.10.2.75.19.1.2.1.4 | Columnh3cDot11IOTModuleModel | read-only | current | This object represents the model of a module. |
| 1.3.6.1.4.1.2011.10.2.75.19.1.2.1.5 | Columnh3cDot11IOTModuleHwVersion | read-only | current | This object represents the hardware version of a module. |
| 1.3.6.1.4.1.2011.10.2.75.19.1.2.1.6 | Columnh3cDot11IOTModuleSwVersion | read-only | current | This object represents the software version of a module. |
| 1.3.6.1.4.1.2011.10.2.75.19.1.2.1.7 | Columnh3cDot11IOTModuleSerialId | read-only | current | This object represents the sequence ID of a module. |
| 1.3.6.1.4.1.2011.10.2.75.19.2 | Nodeh3cWlanIOTConfigGroup | |||
| 1.3.6.1.4.1.2011.10.2.75.19.2.1 | Tableh3cWlanIOTConfigTable | not-accessible | current | Administrators must configure IOT parameters. |
| 1.3.6.1.4.1.2011.10.2.75.19.2.1.1 | Rowh3cWlanIOTConfigEntry | not-accessible | current | Each entry contains module configuration information. |
| 1.3.6.1.4.1.2011.10.2.75.19.2.1.1.1 | Columnh3cWlanIOTAPSerialID | not-accessible | current | This object represents the serial ID of an AP. |
| 1.3.6.1.4.1.2011.10.2.75.19.2.1.1.2 | Columnh3cWlanIOTEngineAdd | read-write | current | This object represents the IPv4 address of the location server. |
| 1.3.6.1.4.1.2011.10.2.75.19.2.1.1.3 | Columnh3cWlanIOTEnginePort | read-write | current | This object represents the UDP port to listen for IOT messages from the server. |
| 1.3.6.1.4.1.2011.10.2.75.19.3 | Nodeh3cWlanModuleNotifyGroup | |||
| 1.3.6.1.4.1.2011.10.2.75.19.3.0 | Nodeh3cWlanModuleTraps | |||
| 1.3.6.1.4.1.2011.10.2.75.19.3.0.1 | Notificationh3cWlanModuleInsertTrap | current | This notification will be generated when an IOT module is inserted. | |
| 1.3.6.1.4.1.2011.10.2.75.19.3.0.2 | Notificationh3cWlanModuleRomveTrap | current | This notification will be generated when an IOT module is removed. | |
| 1.3.6.1.4.1.2011.10.2.75.19.3.0.3 | Notificationh3cWlanModuleMissMatch | current | This notification will be generated when the configured type doesn't match the module type. | |
| 1.3.6.1.4.1.2011.10.2.75.19.3.1 | Nodeh3cWlanModuleTrapVarObjects | |||
| 1.3.6.1.4.1.2011.10.2.75.19.3.1.1 | Scalarh3cWlanTrapAPMacAddress | accessible-for-notify | current | This object represents the MAC address of an AP. |
| 1.3.6.1.4.1.2011.10.2.75.19.3.1.2 | Scalarh3cWlanTrapModuleID | accessible-for-notify | current | This object represents the ID of a module. |
| 1.3.6.1.4.1.2011.10.2.75.19.3.1.3 | Scalarh3cWlanTrapModuleCfgType | accessible-for-notify | current | This object represents the configuration type of a module. |
| 1.3.6.1.4.1.2011.10.2.75.19.3.1.4 | Scalarh3cWlanTrapModulePhyType | accessible-for-notify | current | This object represents the physical type of a module. |
| 1.3.6.1.4.1.2011.10.2.75.19.3.1.5 | Scalarh3cWlanTrapModuleModel | accessible-for-notify | current | This object represents the model of a module. |
| 1.3.6.1.4.1.2011.10.2.75.19.3.1.6 | Scalarh3cWlanTrapModuleHwVersion | accessible-for-notify | current | This object represents the hardware version of a module. |
| 1.3.6.1.4.1.2011.10.2.75.19.3.1.7 | Scalarh3cWlanTrapModuleSwVersion | accessible-for-notify | current | This object represents the software version of a module. |
| 1.3.6.1.4.1.2011.10.2.75.19.3.1.8 | Scalarh3cWlanTrapModuleSequenceId | accessible-for-notify | current | This object represents the sequence ID of a module. |
| 1.3.6.1.4.1.2011.10.2.75.19.4 | Nodeh3cWlanBLEConfigGroup | |||
| 1.3.6.1.4.1.2011.10.2.75.19.4.1 | Tableh3cWlanBLEConfigTable | not-accessible | current | Administrators must configure Bluetooth Low Energy (BLE) parameters. |
| 1.3.6.1.4.1.2011.10.2.75.19.4.1.1 | Rowh3cWlanBLEConfigEntry | not-accessible | current | Each entry contains BLE location configuration information. |
| 1.3.6.1.4.1.2011.10.2.75.19.4.1.1.1 | Columnh3cWlanBLEAPSerialID | not-accessible | current | This object represents the serial ID of an AP. |
| 1.3.6.1.4.1.2011.10.2.75.19.4.1.1.2 | Columnh3cWlanBLEStatus | read-write | current | This object represents the enabled or disabled status of BLE location. |
| 1.3.6.1.4.1.2011.10.2.75.19.4.1.1.3 | Columnh3cWlanBLEEngineAdd | read-write | current | This object represents the server's IPv4 address to which BLE messages are sent. |
| 1.3.6.1.4.1.2011.10.2.75.19.4.1.1.4 | Columnh3cWlanBLEEnginePort | read-write | current | This object represents the UDP port of the location server. |
| 1.3.6.1.4.1.2011.10.2.75.19.4.1.1.5 | Columnh3cWlanBLEVendorPort | read-write | current | This object represents the UDP port to listen for BLE messages from the server. |
| 1.3.6.1.4.1.2011.10.2.75.19.4.1.1.6 | Columnh3cWlanBLERssiStatus | read-write | current | This object represents the enabled or disabled status of BLE RSSI-based packet filtering. |
| 1.3.6.1.4.1.2011.10.2.75.19.4.1.1.7 | Columnh3cWlanBLERssiThreshold | read-write | current | This object represents the max RSSI value of clients' packets. |
| 1.3.6.1.4.1.2011.10.2.75.19.4.1.1.8 | Columnh3cWlanBLEConnectPassword | read-write | current | This object represents the BLE module connection password. |
| 1.3.6.1.4.1.2011.10.2.75.19.4.1.1.9 | Columnh3cWlanBLECommandPassword | read-write | current | This object represents the BLE module command password. |
| 1.3.6.1.4.1.2011.10.2.75.19.4.1.1.10 | Columnh3cWlanBLEReportStatus | read-write | current | This object represents the enabled or disabled status of BLE location reporting. |
| 1.3.6.1.4.1.2011.10.2.75.19.4.1.1.11 | Columnh3cWlanBLEReportInterval | read-write | current | This object represents the interval at which an AP sends BLE messages to the server. |
| 1.3.6.1.4.1.2011.10.2.75.19.4.1.1.12 | Columnh3cWlanBLEAgingTime | read-write | current | This object represents the aging time for iBeacon devices. |
| 1.3.6.1.4.1.2011.10.2.75.19.4.1.1.13 | Columnh3cWlanBLERealTimeReportStatus | read-write | current | This object represents the enabled or disabled status of BLE realtime reporting. |
| 1.3.6.1.4.1.2011.10.2.75.19.4.1.1.14 | Columnh3cWlanBLERealTimePrefix | read-write | current | This object represents the manufacturer prefix of BLE devices to be located. The prefix must be an even number. |
| 1.3.6.1.4.1.2011.10.2.75.19.4.2 | Tableh3cWlanBLEModuleConfigTable | not-accessible | current | Administrators must configure BLE module parameters. |
| 1.3.6.1.4.1.2011.10.2.75.19.4.2.1 | Rowh3cWlanBLEModuleConfigEntry | not-accessible | current | Each entry contains BLE module configuration information. |
| 1.3.6.1.4.1.2011.10.2.75.19.4.2.1.1 | Columnh3cWlanBLEModuleAPSerialID | not-accessible | current | This object represents the serial ID of an AP. |
| 1.3.6.1.4.1.2011.10.2.75.19.4.2.1.2 | Columnh3cWlanBLEModuleID | not-accessible | current | This object represents the ID of a module. |
| 1.3.6.1.4.1.2011.10.2.75.19.4.2.1.3 | Columnh3cWlanBLEAdvReportStatus | read-write | current | This object represents the enabled or disabled status of BLE advertisement reporting. |
| 1.3.6.1.4.1.2011.10.2.75.19.4.2.1.4 | Columnh3cWlanBLEAdvReportInterval | read-write | current | This object represents the interval at which a BLE module sends advertisement packets. |
| 1.3.6.1.4.1.2011.10.2.75.19.4.2.1.5 | Columnh3cWlanBLEAdvUUID | read-write | current | This object represents the UUID of BLE advertisement packets. |
| 1.3.6.1.4.1.2011.10.2.75.19.4.2.1.6 | Columnh3cWlanBLEAdvMajorID | read-write | current | This object represents the major ID of BLE advertisement packets. |
| 1.3.6.1.4.1.2011.10.2.75.19.4.2.1.7 | Columnh3cWlanBLEAdvMinorID | read-write | current | This object represents the minor ID of BLE advertisement packets. |
| 1.3.6.1.4.1.2011.10.2.75.19.5 | Nodeh3cWlanAEConfigGroup | |||
| 1.3.6.1.4.1.2011.10.2.75.19.5.1 | Tableh3cWlanAEConfigTable | not-accessible | current | Administrators must configure AeroScout (AE) parameters. |
| 1.3.6.1.4.1.2011.10.2.75.19.5.1.1 | Rowh3cWlanAEConfigEntry | not-accessible | current | Each entry contains AE location configuration information. |
| 1.3.6.1.4.1.2011.10.2.75.19.5.1.1.1 | Columnh3cWlanAEAPSerialID | not-accessible | current | This object represents the serial ID of an AP. |
| 1.3.6.1.4.1.2011.10.2.75.19.5.1.1.2 | Columnh3cWlanAEStatus | read-write | current | This object represents the enabled or disabled status of AE location. |
| 1.3.6.1.4.1.2011.10.2.75.19.5.1.1.3 | Columnh3cWlanAEEngineAddr | read-write | current | This object represents the server's IPv4 address to which AE messages are sent. |
| 1.3.6.1.4.1.2011.10.2.75.19.5.1.1.4 | Columnh3cWlanAEEnginePort | read-write | current | This object represents the UDP port of the location server. |
| 1.3.6.1.4.1.2011.10.2.75.19.5.1.1.5 | Columnh3cWlanAEVendorPort | read-write | current | This object represents the UDP port to listen for AE messages from the server. |
| 1.3.6.1.4.1.2011.10.2.75.19.5.1.1.6 | Columnh3cWlanAETimeStamp | read-write | current | This object represents the enabled or disabled status of timestamp. |
| 1.3.6.1.4.1.2011.10.2.75.19.5.1.1.7 | Columnh3cWlanAEVersion | read-write | current | This object represents the version of the AE protocol. |
| 1.3.6.1.4.1.2011.10.2.75.19.5.1.1.8 | Columnh3cWlanAETagMultiAddr | read-write | current | This object represents Tag's multicast MAC address. |
| 1.3.6.1.4.1.2011.10.2.75.19.5.1.1.9 | Columnh3cWlanAEEngineDetection | read-write | current | This object represents the location mode. |
| 1.3.6.1.4.1.2011.10.2.75.19.5.1.1.10 | Columnh3cWlanAEReportMode | read-write | current | This object represents the report mode. |
| 1.3.6.1.4.1.2011.10.2.75.19.5.2 | Tableh3cWlanAERadioConfigTable | not-accessible | current | Administrators must configure AE parameters. |
| 1.3.6.1.4.1.2011.10.2.75.19.5.2.1 | Rowh3cWlanAERadioConfigEntry | not-accessible | current | Each entry contains AE location configuration information. |
| 1.3.6.1.4.1.2011.10.2.75.19.5.2.1.1 | Columnh3cWlanAERadioAPSerialID | not-accessible | current | This object represents the serial ID of an AP. |
| 1.3.6.1.4.1.2011.10.2.75.19.5.2.1.2 | Columnh3cWlanAEAPRadioID | not-accessible | current | This object represents the ID of a radio. |
| 1.3.6.1.4.1.2011.10.2.75.19.5.2.1.3 | Columnh3cWlanAERadioStatus | read-write | current | This object represents the enabled or disabled status of radio-based location. |
| 1.3.6.1.4.1.2011.10.2.75.19.5.2.1.4 | Columnh3cWlanAEMUStatus | read-write | current | This object represents the status of MU message reporting. |
| 1.3.6.1.4.1.2011.10.2.75.19.5.2.1.5 | Columnh3cWlanAETagStatus | read-write | current | This object represents the status of Tag message reporting. |
| 1.3.6.1.4.1.2011.10.2.75.19.6 | Nodeh3cWlanCommonConfigGroup | |||
| 1.3.6.1.4.1.2011.10.2.75.19.6.1 | Tableh3cWlanCommonConfigTable | not-accessible | current | Administrators must configure common parameters. |
| 1.3.6.1.4.1.2011.10.2.75.19.6.1.1 | Rowh3cWlanCommonConfigEntry | not-accessible | current | Each entry contains common configuration information. |
| 1.3.6.1.4.1.2011.10.2.75.19.6.1.1.1 | Columnh3cWlanCommonAPSerialID | not-accessible | current | This object represents the serial ID of an AP. |
| 1.3.6.1.4.1.2011.10.2.75.19.6.1.1.2 | Columnh3cWlanDilutionStatus | read-write | current | This object represents the enabled or disabled status of packet dilution. |
| 1.3.6.1.4.1.2011.10.2.75.19.6.1.1.3 | Columnh3cWlanDilutionFactor | read-write | current | This object represents the packet dilution factor. |
| 1.3.6.1.4.1.2011.10.2.75.19.6.1.1.4 | Columnh3cWlanDilutionTimeout | read-write | current | This object represents the packet dilution timeout. |
| 1.3.6.1.4.1.2011.10.2.75.19.6.1.1.5 | Columnh3cWlanIgnoreBeacon | read-write | current | This object represents the enabled or disabled status of beacon ignoring. |
| 1.3.6.1.4.1.2011.10.2.75.19.6.1.1.6 | Columnh3cWlanRateLimitStatus | read-write | current | This object represents the enabled or disabled status of location packet rate limiting. |
| 1.3.6.1.4.1.2011.10.2.75.19.6.1.1.7 | Columnh3cWlanRateLimitCir | read-write | current | This object represents the CIR for sending location packets. |
| 1.3.6.1.4.1.2011.10.2.75.19.6.1.1.8 | Columnh3cWlanRateLimitCbs | read-write | current | This object represents the CBS for sending location packets. |
| 1.3.6.1.4.1.2011.10.2.75.19.6.1.1.9 | Columnh3cWlanClientRateLimitStatus | read-write | current | This object represents the enabled or disabled status of client packet rate limiting. |
| 1.3.6.1.4.1.2011.10.2.75.19.6.1.1.10 | Columnh3cWlanClientRateLimitCir | read-write | current | This object represents the CIR for receiving client packets. |
| 1.3.6.1.4.1.2011.10.2.75.19.6.1.1.11 | Columnh3cWlanClientRateLimitCbs | read-write | current | This object represents the CBS for receiving client packets. |
| 1.3.6.1.4.1.2011.10.2.75.19.6.1.1.12 | Columnh3cWlanRssiStatus | read-write | current | This object represents the enabled or disabled status of RSSI-based packet filtering. |
| 1.3.6.1.4.1.2011.10.2.75.19.6.1.1.13 | Columnh3cWlanRssiThreshold | read-write | current | This object represents the max RSSI value of clients' packets. |
| 1.3.6.1.4.1.2011.10.2.75.19.6.1.1.14 | Columnh3cWlanIgnoreApFrame | read-write | current | This object represents the enabled or disabled status of AP packet ignoring. |
| 1.3.6.1.4.1.2011.10.2.75.19.7 | Nodeh3cWlanCUPIDConfigGroup | |||
| 1.3.6.1.4.1.2011.10.2.75.19.7.1 | Tableh3cWlanCUPIDConfigTable | not-accessible | current | Administrators must configure CUPID parameters. |
| 1.3.6.1.4.1.2011.10.2.75.19.7.1.1 | Rowh3cWlanCUPIDConfigEntry | not-accessible | current | Each entry contains CUPID location configuration information. |
| 1.3.6.1.4.1.2011.10.2.75.19.7.1.1.1 | Columnh3cWlanCupidAPSerialID | not-accessible | current | This object represents the serial ID of an AP. |
| 1.3.6.1.4.1.2011.10.2.75.19.7.1.1.2 | Columnh3cWlanCupidStatus | read-write | current | This object represents the status of CUPID location. |
| 1.3.6.1.4.1.2011.10.2.75.19.7.1.1.3 | Columnh3cWlanCupidEngineAddr | read-write | current | This object represents the IPv4 address of the CUPID location server. |
| 1.3.6.1.4.1.2011.10.2.75.19.7.1.1.4 | Columnh3cWlanCupidEnginePort | read-write | current | This object represents the UDP port of the CUPID location server. |
| 1.3.6.1.4.1.2011.10.2.75.19.7.1.1.5 | Columnh3cWlanCupidVendorPort | read-write | current | This object represents the UDP port to listen for CUPID messages from the server. |
| 1.3.6.1.4.1.2011.10.2.75.19.7.1.1.6 | Columnh3cWlanCupidReportStatus | read-write | current | This object represents the status of CUPID location reporting. |
| 1.3.6.1.4.1.2011.10.2.75.19.7.1.1.7 | Columnh3cWlanCupidReportInterval | read-write | current | This object represents the interval for sending CUPID location packets. |
| 1.3.6.1.4.1.2011.10.2.75.19.7.1.1.8 | Columnh3cWlanCupidUnassSta | read-write | current | This object represents the status of unassociated client information reporting for CUPID location. |
| 1.3.6.1.4.1.2011.10.2.75.19.7.1.1.9 | Columnh3cWlanCupidUnassMeasureSta | read-write | current | This object represents the status of CUPID location for unassociated clients. |
| 1.3.6.1.4.1.2011.10.2.75.19.7.1.1.10 | Columnh3cWlanCupidReportMode | read-write | current | This object represents the report mode. |
| 1.3.6.1.4.1.2011.10.2.75.19.7.1.1.11 | Columnh3cWlanCUPIDReportFormat | read-write | current | This object represents the report format. |
| 1.3.6.1.4.1.2011.10.2.75.19.8 | Nodeh3cWlanFPConfigGroup | |||
| 1.3.6.1.4.1.2011.10.2.75.19.8.1 | Tableh3cWlanFPConfigTable | not-accessible | current | Administrators must configure RF fingerprinting parameters. |
| 1.3.6.1.4.1.2011.10.2.75.19.8.1.1 | Rowh3cWlanFPConfigEntry | not-accessible | current | Each entry contains RF fingerprinting configuration information. |
| 1.3.6.1.4.1.2011.10.2.75.19.8.1.1.1 | Columnh3cWlanFPAPSerialID | not-accessible | current | This object represents the serial ID of an AP. |
| 1.3.6.1.4.1.2011.10.2.75.19.8.1.1.2 | Columnh3cWlanFPStatus | read-write | current | This object represents the enabled or disabled status of RF fingerprinting. |
| 1.3.6.1.4.1.2011.10.2.75.19.8.1.1.3 | Columnh3cWlanFPEngineAddr | read-write | current | This object represents the IPv4 address of the RF fingerprinting server. |
| 1.3.6.1.4.1.2011.10.2.75.19.8.1.1.4 | Columnh3cWlanFPEnginePort | read-write | current | This object represents the UDP port of the RF fingerprinting server. |
| 1.3.6.1.4.1.2011.10.2.75.19.8.1.1.5 | Columnh3cWlanFPVendorPort | read-write | current | This object represents the UDP port to listen for RF fingerprinting packets from the server. |
| 1.3.6.1.4.1.2011.10.2.75.19.8.1.1.6 | Columnh3cWlanFPRawFrameReport | read-write | current | This object represents the status of raw frame reporting for RF fingerprinting. |
| 1.3.6.1.4.1.2011.10.2.75.19.8.1.1.7 | Columnh3cWlanFPMUReport | read-write | current | This object represents the status of MU information reporting for RF fingerprinting. |
| 1.3.6.1.4.1.2011.10.2.75.19.8.1.1.8 | Columnh3cWlanFPReportMode | read-write | current | This object represents the report mode. |
| 1.3.6.1.4.1.2011.10.2.75.19.8.1.1.9 | Columnh3cWlanFPReportFormat | read-write | current | This object represents the report format. |
| 1.3.6.1.4.1.2011.10.2.75.19.8.1.1.10 | Columnh3cWlanFPTagMultiAddr | read-write | current | This object represents Tag's multicast MAC address. |