HH3C-COMMON-SYSTEM-MIB
48 objects
This file describes common MIB objects implemented by both Routers and Switches.
Imported Objects
| HH3C-OID-MIB | hh3c |
| INET-ADDRESS-MIB | InetAddress InetAddressType |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks |
| SNMPv2-TC | DateAndTime DisplayString RowStatus TimeStamp |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.25506.6 | Identityhh3cSystem | clauses | clauses | This file describes common MIB objects implemented by both Routers and Switches. |
| 1.3.6.1.4.1.25506.6.5 | Scalarhh3cWriteConfig | read-write | current | Write config to router. |
| 1.3.6.1.4.1.25506.6.6 | Scalarhh3cStartFtpServer | read-write | current | Decide whether start ftp-server.enable(1) indicates to start ftp-server; disable(2) indicates to stop ftp-server. |
| 1.3.6.1.4.1.25506.6.7 | Scalarhh3cReboot | read-write | current | normal: do nothing. reboot: reboot the device. 'normal' will be returned when getting. |
| 1.3.6.1.4.1.25506.6.8 | Nodehh3cSystemNotification | |||
| 1.3.6.1.4.1.25506.6.8.1 | Notificationhh3cWriteSuccessTrap | current | Send a trap about write success. | |
| 1.3.6.1.4.1.25506.6.8.2 | Notificationhh3cWriteFailureTrap | current | Send a trap about write failure. | |
| 1.3.6.1.4.1.25506.6.8.3 | Notificationhh3cRebootSendTrap | current | If a user restarts the device with command 'reboot', this trap will be sent two seconds before the device reboots. | |
| 1.3.6.1.4.1.25506.6.8.4 | Notificationhh3cSysColdStartTrap | current | System cold start trap. | |
| 1.3.6.1.4.1.25506.6.8.5 | Notificationhh3cSysWarmStartTrap | current | System warm start trap. | |
| 1.3.6.1.4.1.25506.6.8.6 | Notificationhh3cSysLoghostUnreachableTrap | current | This notification will be sent when a loghost becomes unreachable. | |
| 1.3.6.1.4.1.25506.6.8.7 | Notificationhh3cSysDyingGaspTrap | current | This notification will be sent upon loss of power. | |
| 1.3.6.1.4.1.25506.6.9 | Scalarhh3cSoftwareVersion | read-only | current | Software version. |
| 1.3.6.1.4.1.25506.6.10 | Scalarhh3cSysBootType | read-only | current | Boot type of the system, indicates whether the last device reboot was by CLI (warm start) or power off (cold start). |
| 1.3.6.1.4.1.25506.6.11 | Nodehh3cSystemInfo | |||
| 1.3.6.1.4.1.25506.6.11.1 | Scalarhh3cSysStatisticPeriod | read-write | current | Statistic period. The device collects statistics within the period. |
| 1.3.6.1.4.1.25506.6.11.2 | Scalarhh3cSysSamplePeriod | read-write | current | Sampling period. The device takes samples periodically for statistics collection. |
| 1.3.6.1.4.1.25506.6.11.3 | Scalarhh3cSysTrapResendPeriod | read-write | current | Trap resending period. If the value is zero, the trap will not be re-sent. |
| 1.3.6.1.4.1.25506.6.11.4 | Scalarhh3cSysTrapCollectionPeriod | read-write | current | Trap collecting period. If the value is zero, the trap will not be re-sent. |
| 1.3.6.1.4.1.25506.6.11.5 | Scalarhh3cSysSnmpPort | read-only | current | UDP port for SNMP protocol entity to receive messages except Trap-PDU. |
| 1.3.6.1.4.1.25506.6.11.6 | Scalarhh3cSysSnmpTrapPort | read-only | current | UDP port for Trap-PDU to receive messages. |
| 1.3.6.1.4.1.25506.6.11.7 | Scalarhh3cSysNetID | read-write | current | System Net ID. |
| 1.3.6.1.4.1.25506.6.11.8 | Scalarhh3cSysLastSampleTime | read-only | current | Last sampling time of the system. |
| 1.3.6.1.4.1.25506.6.11.9 | Scalarhh3cSysTrapSendNum | read-write | current | Maximum number of times for sending a trap. If the value is zero, a trap will be sent at an interval continually. |
| 1.3.6.1.4.1.25506.6.11.10 | Scalarhh3cSysFirstTrapTime | accessible-for-notify | current | Time when the first trap is sent. |
| 1.3.6.1.4.1.25506.6.11.11 | Scalarhh3cSysBannerMOTD | read-write | current | An administratively configured message that is displayed to the user when the user logs in to the device through the console port or Web interface. |
| 1.3.6.1.4.1.25506.6.12 | Nodehh3cSystemNotificationInfo | |||
| 1.3.6.1.4.1.25506.6.12.1 | Scalarhh3cSysLoghostIndex | accessible-for-notify | current | Index of loghost. |
| 1.3.6.1.4.1.25506.6.12.2 | Scalarhh3cSysLoghostIpaddressType | accessible-for-notify | current | IP address type of the loghost. |
| 1.3.6.1.4.1.25506.6.12.3 | Scalarhh3cSysLoghostIpaddress | accessible-for-notify | current | IP address of the loghost. |
| 1.3.6.1.4.1.25506.6.12.4 | Scalarhh3cSysLoghostTrapVpnName | accessible-for-notify | current | VPN name of the loghost. |
| 1.3.6.1.4.1.25506.6.13 | Tablehh3cSystemDiagInfoTable | not-accessible | current | This table is used to write diagnosis-information file. |
| 1.3.6.1.4.1.25506.6.13.1 | Rowhh3cSystemDiagInfoEntry | not-accessible | current | The entry of hh3cSystemDiagInfoTable. The maximum number of entries of this table is 10. When creating a new entry if there are already 10 entries in this tabl… |
| 1.3.6.1.4.1.25506.6.13.1.1 | Columnhh3cSystemDiagInfoIndex | not-accessible | current | Specifies the index of an entry. |
| 1.3.6.1.4.1.25506.6.13.1.2 | Columnhh3cSystemDiagInfoFilename | read-create | current | Specifies the name of diagnosis-information file. When creating a row without this column, the system will generate a default filename instead. |
| 1.3.6.1.4.1.25506.6.13.1.3 | Columnhh3cSystemDiagInfoRowStatus | read-create | current | The row status of this entry. Only active, createAndGo, and destroy are supported. |
| 1.3.6.1.4.1.25506.6.13.1.4 | Columnhh3cSystemDiagInfoOperEndTime | read-only | current | The time when this operation was completed. |
| 1.3.6.1.4.1.25506.6.13.1.5 | Columnhh3cSystemDiagInfoOperState | read-only | current | The state of this operation. If the state of this operation is opFailure, the detailed information can be read by hh3cSystemDiagInfoOperFailReason. |
| 1.3.6.1.4.1.25506.6.13.1.6 | Columnhh3cSystemDiagInfoOperFailReason | read-only | current | The failure reasons of this operation. |
| 1.3.6.1.4.1.25506.6.14 | Nodehh3cSystemWorkingMode | |||
| 1.3.6.1.4.1.25506.6.14.1 | Tablehh3cSystemWorkingModeTable | not-accessible | current | This table is used to show the system operating mode information. The supported features and the specifications of the supported features vary by system operat… |
| 1.3.6.1.4.1.25506.6.14.1.1 | Rowhh3cSystemWorkingModeEntry | not-accessible | current | The entry of hh3cSystemtemWorkingModeTable. |
| 1.3.6.1.4.1.25506.6.14.1.1.1 | Columnhh3cSystemWorkingModeIndex | not-accessible | current | The unique index of hh3cSystemWorkingModeTable. The value should be a a small-incremental integer. An index value uniquely identifies a system operating mode. |
| 1.3.6.1.4.1.25506.6.14.1.1.2 | Columnhh3cSystemWorkingModeName | read-only | current | The name that uniquely identifies the system operating mode. The value should not contain blank spaces. |
| 1.3.6.1.4.1.25506.6.14.1.1.3 | Columnhh3cSystemWorkingModeDescr | read-only | current | Description of the system operating mode. |
| 1.3.6.1.4.1.25506.6.14.2 | Scalarhh3cSystemWorkingModeDefault | read-only | current | The default system operating mode. Different device devices might have different default system operating modes. The value is from hh3cSystemWorkingModeIndex. |
| 1.3.6.1.4.1.25506.6.14.3 | Scalarhh3cSystemWorkingModeCurrent | read-only | current | The current system operating mode. The value is from hh3cSystemWorkingModeIndex. |
| 1.3.6.1.4.1.25506.6.14.4 | Scalarhh3cSystemWorkingModeNext | read-write | current | The system operating mode to be used at next startup. A mode change takes effect after the running configuration is saved and the device is rebooted. The value… |