HH3C-DOMAIN-MIB
42 objects
The MIB module is used for managing domain.
Imported Objects
| HH3C-OID-MIB | hh3cCommon |
| INET-ADDRESS-MIB | InetAddress InetAddressType |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY OBJECT-TYPE TimeTicks |
| SNMPv2-TC | RowStatus TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.25506.2.46 | Identityhh3cDomain | The MIB module is used for managing domain. | ||
| 1.3.6.1.4.1.25506.2.46.1 | Nodehh3cDomainControl | |||
| 1.3.6.1.4.1.25506.2.46.1.1 | Scalarhh3cDomainDefault | read-write | current | Specifies default domain on the equipment. Default value is 'system'. |
| 1.3.6.1.4.1.25506.2.46.2 | Nodehh3cDomainTables | |||
| 1.3.6.1.4.1.25506.2.46.2.1 | Tablehh3cDomainInfoTable | not-accessible | current | The (conceptual) table listing the domains. |
| 1.3.6.1.4.1.25506.2.46.2.1.1 | Rowhh3cDomainInfoEntry | not-accessible | current | An entry (conceptual row) representing a domain. |
| 1.3.6.1.4.1.25506.2.46.2.1.1.1 | Columnhh3cDomainName | not-accessible | current | An index uniquely identifies a domain. |
| 1.3.6.1.4.1.25506.2.46.2.1.1.2 | Columnhh3cDomainState | read-create | current | The state of the domain, which reflects whether the domain is active. Default value is active. |
| 1.3.6.1.4.1.25506.2.46.2.1.1.3 | Columnhh3cDomainMaxAccessNum | read-create | current | The maximum number which the domain allows to access. If the value is set to 0, the access limit will be disabled. |
| 1.3.6.1.4.1.25506.2.46.2.1.1.4 | Columnhh3cDomainVlanAssignMode | read-create | current | The vlan assignment mode. The mode SHOULD be the same as the mode of corresponding server. 1 (integer) - Integer Vlan assignment mode. 2 (string) - String Vlan… |
| 1.3.6.1.4.1.25506.2.46.2.1.1.5 | Columnhh3cDomainIdleCutEnable | read-create | current | The idle cut control. Setting this attribute to true, the connection will be cut when the flow is less than hh3cDomainIdleCutMinFlow and lasts hh3cDomainIdleCu… |
| 1.3.6.1.4.1.25506.2.46.2.1.1.6 | Columnhh3cDomainIdleCutMaxTime | read-create | current | The maximal time of idle-cut. The unit is minute. If the value of hh3cDomainIdleCutEnable is false, the value of hh3cDomainIdleCutMaxTime is meaningless. |
| 1.3.6.1.4.1.25506.2.46.2.1.1.7 | Columnhh3cDomainIdleCutMinFlow | read-create | current | The minimal flow of idle-cut. The unit is byte. If the value of hh3cDomainIdleCutEnable is false, the value of hh3cDomainIdleCutMinFlow is meaningless. |
| 1.3.6.1.4.1.25506.2.46.2.1.1.8 | Columnhh3cDomainMessengerEnable | read-create | current | The messenger service control. If set hh3cDomainMessengerEnable to true, hh3cDomainMessengerLimitTime and hh3cDomainMessengerSpanTime must be set to valid valu… |
| 1.3.6.1.4.1.25506.2.46.2.1.1.9 | Columnhh3cDomainMessengerLimitTime | read-create | current | The messenger service limit time. The unit is minute. If the value of hh3cDomainMessengerEnable is false, the value of hh3cDomainMessengerLimitTime is meaningl… |
| 1.3.6.1.4.1.25506.2.46.2.1.1.10 | Columnhh3cDomainMessengerSpanTime | read-create | current | The messenger service span time. The unit is minute. It must be a multiple of 5. If the value of hh3cDomainMessengerEnable is false, the value of hh3cDomainMes… |
| 1.3.6.1.4.1.25506.2.46.2.1.1.11 | Columnhh3cDomainSelfServiceEnable | read-create | current | The self service control. If set hh3cDomainSelfServiceEnable to true, hh3cDomainSelfServiceURL must be set to a valid value. Default value is FALSE. |
| 1.3.6.1.4.1.25506.2.46.2.1.1.12 | Columnhh3cDomainSelfServiceURL | read-create | current | Self-service URL(Uniform Resource Locator) of the domain. |
| 1.3.6.1.4.1.25506.2.46.2.1.1.13 | Columnhh3cDomainAccFailureAction | read-create | current | Defines the action that authentication should be taken if authentication succeeds but the associated accounting start fails. 1 (ignore) - treat as authenticati… |
| 1.3.6.1.4.1.25506.2.46.2.1.1.14 | Columnhh3cDomainRowStatus | read-create | current | This object is responsible for managing the creation, deletion and modification of rows, which supports active status and CreateAndGo, Destroy operation. To de… |
| 1.3.6.1.4.1.25506.2.46.2.1.1.15 | Columnhh3cDomainCurrentAccessNum | read-only | current | The current access number of the domain. |
| 1.3.6.1.4.1.25506.2.46.2.1.1.16 | Columnhh3cDomainIdleCutTime | read-only | current | Authentication aging time. If no packet is transmitted during the aging time, the authentication is aged out. |
| 1.3.6.1.4.1.25506.2.46.2.2 | Tablehh3cDomainSchemeTable | not-accessible | current | The (conceptual) table listing schemes of all domains. |
| 1.3.6.1.4.1.25506.2.46.2.2.1 | Rowhh3cDomainSchemeEntry | not-accessible | current | An entry (conceptual row) representing an IP pool of a domain |
| 1.3.6.1.4.1.25506.2.46.2.2.1.1 | Columnhh3cDomainSchemeIndex | not-accessible | current | The scheme index of domain, which is an identifier of a domain scheme. |
| 1.3.6.1.4.1.25506.2.46.2.2.1.2 | Columnhh3cDomainSchemeMode | read-create | current | The scheme mode of the domain. Setting hh3cDomainSchemeMode to none(1) indicates the domain has none scheme. Setting hh3cDomainSchemeMode to local(2) indicates… |
| 1.3.6.1.4.1.25506.2.46.2.2.1.3 | Columnhh3cDomainAuthSchemeName | read-create | current | The authentication scheme name of domain. If hh3cDomainSchemeMode is set to radius, tacacs or ldap, the hh3cDomainAuthSchemeName must be configured with a vali… |
| 1.3.6.1.4.1.25506.2.46.2.2.1.4 | Columnhh3cDomainAcctSchemeName | read-create | current | The accounting scheme name of the domain. If hh3cDomainSchemeMode is set to radius or tacacs, the hh3cDomainAcctSchemeName must be configured with a valid valu… |
| 1.3.6.1.4.1.25506.2.46.2.2.1.5 | Columnhh3cDomainSchemeRowStatus | read-create | current | This object is responsible for managing the creation, deletion and modification of rows, which supports active status and createAndGo, destroy operation. To cr… |
| 1.3.6.1.4.1.25506.2.46.2.2.1.6 | Columnhh3cDomainSchemeAAAType | read-create | current | Service Type of the server. |
| 1.3.6.1.4.1.25506.2.46.2.2.1.7 | Columnhh3cDomainSchemeAAAName | read-create | current | The scheme name of the domain, whether the scheme represents accounting, authentication or authorization references the object hh3cDomainSchemeAAAType. The val… |
| 1.3.6.1.4.1.25506.2.46.2.2.1.8 | Columnhh3cDomainSchemeAccessMode | read-create | current | The access mode of the domain scheme. |
| 1.3.6.1.4.1.25506.2.46.2.3 | Tablehh3cDomainIpPoolTable | not-accessible | current | The (conceptual) table listing IP pools of all domains. |
| 1.3.6.1.4.1.25506.2.46.2.3.1 | Rowhh3cDomainIpPoolEntry | not-accessible | current | An entry (conceptual row) representing an IP pool of a domain. |
| 1.3.6.1.4.1.25506.2.46.2.3.1.1 | Columnhh3cDomainIpPoolNum | not-accessible | current | The number of IP pool, which is an identifier of an IP pool. |
| 1.3.6.1.4.1.25506.2.46.2.3.1.2 | Columnhh3cDomainIpPoolLowIpAddrType | read-create | current | The low IP addresses type (IPv4 or IPv6) of IP pool. |
| 1.3.6.1.4.1.25506.2.46.2.3.1.3 | Columnhh3cDomainIpPoolLowIpAddr | read-create | current | The low IP address of IP pool. |
| 1.3.6.1.4.1.25506.2.46.2.3.1.4 | Columnhh3cDomainIpPoolLen | read-create | current | The length of IP pool. Default value is 1. |
| 1.3.6.1.4.1.25506.2.46.2.3.1.5 | Columnhh3cDomainIpPoolRowStatus | read-create | current | This object is responsible for managing the creation, deletion and modification of rows, which supports active status and CreateAndGo, Destroy operation. To cr… |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| Hh3cAAATypeDomainScheme | INTEGER { accounting(1), authentication(2), authorization(3), none(4) } | current | The service type of the server. |
| Hh3cAccessModeofDomainScheme | INTEGER { default(1), login(2), lanAccess(3), portal(4), ppp(5), gcm(6), dvpn(7), dhcp(8), voice(9), superauthen(10), command(11), reserved(12) } | current | The access mode of the domain. |
| Hh3cModeOfDomainScheme | INTEGER { none(1), local(2), radius(3), tacacs(4), ldap(5) } | current | The scheme mode of the domain. none: indicates the domain has no scheme. local:indicates the domain will use local-server as a scheme. radius:indicates the domain will use radius scheme. tacacs:indicates the domain will… |