HH3C-DOT11-REF-MIB
26 objects
No module-level DESCRIPTION found.
Imported Objects
| HH3C-OID-MIB | hh3cCommon |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | TEXTUAL-CONVENTION |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| Hh3cDot11AKMType | INTEGER { none(1), psk(2), dot1x(3), ext(4) } | current | Represents the key management mode defined by 802.11i. The following values are supported: none - No key management mode configured, psk - pre-shared key authentication, dot1x - 802.1x authentication, ext - ext. |
| Hh3cDot11AssocFailType | INTEGER { unknownfailure(1), toomanyassoc(2), invalidie(3), unsupportedrate(4), unsupportedpwrcap(5), unsupportedcap(6) } | current | Enumeration of the reasons for station association failure. including: unknownfailure - unknown failure, toomanyassoc - too many association, invalidie - information element is invalid, unsupportedrate - rate is not sup… |
| Hh3cDot11AuthenType | INTEGER { none(1), opensystem(2), sharedkey(3), all(4) } | current | Represents the Authentication mode defined by 802.11. The following values are supported: none - No authentication mode configured, opensystem - In fact,no real authentication happened, sharedkey - System will use chall… |
| Hh3cDot11AuthorFailType | INTEGER { unknownfailure(1), invalidie(2), rsnieversionunsupported(3), wpaieversionunsupported(4), groupcipherinvalid(5), pairwisecipherinvalid(6), akminvalid(7) } | current | Enumeration of the reasons for station authorization failure. including: unknownfailure - unknown failure, invalidie - information element is invalid, rsnieversionunsupported - rsn information element version is not sup… |
| Hh3cDot11ChannelScopeType | Integer32 | current | Represents the channel scope which consists of 802.11a/b/g. |
| Hh3cDot11CipherType | INTEGER { none(1), wep40(2), tkip(4), aesccmp(16), wep104(32), wpisms4(64), wep128(128) } | current | Represents the frame encryption cipher types for frames on IEEE 802.11 radio interfaces. The MIB defines TC by referring to the 802.11i protocol. The following values are supported: none - clear text or no cipher method… |
| Hh3cDot11CirMode | INTEGER { static(1), dynamic(2) } | current | The mode of committed information rate. 'static' means station will use the configured CIR separately. For example, if the CIR is 1Mbps, every station can enjoy 1Mbps. 'dynamic' means all stations will share the configu… |
| Hh3cDot11MACModeType | INTEGER { split(1), localtunnel(2), localbridge(3), fatAP(4) } | current | CAPWAP defines three kinds MAC modes for fit AP. The management packet will be exchanged between AP and AC by CAPWAP control tunnel. For data packet, the following MAC mode are supported: split - AP will tunnel 802.11 d… |
| Hh3cDot11NotifyReasonType | OCTET STRING(SIZE(0..255)) | current | The explanation string is for the event notification of dot11. |
| Hh3cDot11ObjectIDType | OCTET STRING(SIZE(0..127)) | current | Represents AP identifier value type. |
| Hh3cDot11PreambleType | INTEGER { long(1), short(2) } | current | Represents the current radio preamble type. The following values are supported: long - long preambles, short - short preambles. |
| Hh3cDot11QosAcType | INTEGER { acbk(1), acbe(2), acvi(3), acvo(4) } | current | 802.11e defines four types of access category, including: acbk - for background access category, acbe - for besteffort access category, acvi - for voice access category, acvo - for video access category |
| Hh3cDot11RadioElementIndex | Unsigned32 | current | Represents index of radio. For split architecture, It comprises two parts. The lowest 8 bits mean radio ID. The highest 8 bits are reserved. The highest 8 bits stand for AP ID. The meaning is shown as follows: 31 23 15 … |
| Hh3cDot11RadioScopeType | Integer32 | current | Represents radio value scope. |
| Hh3cDot11RadioType | INTEGER { dot11a(1), dot11b(2), dot11g(4), dot11n(8), dot11gn(16), dot11an(32), dot11ac(64), dot11gac(128), dot11ax(256), dot11gax(512) } | current | Represents AP 802.11 radio type of 802.11a/b/g/n/ac/gac as per the standard. The following values are supported: dot11a - 802.11a dot11b - 802.11b dot11g - 802.11g dot11n - 802.11n dot11gn - 802.11gn dot11an - 802.11an … |
| Hh3cDot11RadioType2 | INTEGER { dot11a(1), dot11b(2), dot11g(4), dot11an(8), dot11gn(16), dot11ac(32), dot11gac(64), dot11ax(128), dot11gax(256) } | current | Represents AP 802.11 radio type of 802.11a/b/g/an/gn/ac/gac as per the standard. The following values are supported: dot11a - 802.11a dot11b - 802.11b dot11g - 802.11g dot11an - 802.11an dot11gn - 802.11gn dot11ac - 802… |
| Hh3cDot11RFModeType | INTEGER { manual(1), auto(2) } | current | Represents RF management mode. The following values are supported: manual - Configure RF parameter by manual, auto - Automaticall configure. |
| Hh3cDot11SaIntfDevType | INTEGER { microwave(1), microwaveInverter(2), bluetooth(3), fixedFreqOthers(4), fixedFreqCordlessPhone(5), fixedFreqVideo(6), fixedFreqAudio(7), freqHopperOthers(8), freqHopperCordlessBase(9), freqHopperCordlessNetwork(10), freqHopperXbox(11), genericInterferer(12) } | current | The type of interference device. |
| Hh3cDot11SecIEStatusType | INTEGER { none(1), rsn(2), wpa(3), all(4), ext(5) } | current | To enable the WPA Information element in the beacon and probe response frames sent by AP. The following values are supported: none - both wpa and rsn are disabled, rsn - only enable rsn, wpa - only enable wpa, all - bot… |
| Hh3cDot11ServicePolicyIDType | Integer32 | current | Represents the type of service policy ID. |
| Hh3cDot11SSIDEncryptModeType | INTEGER { cleartxt(1), cipher(2), ext(3) } | current | Represents encryption mode for the specific ESS: The following values are supported: cleartxt - clear txt, cipher - WPA and 802.11i, ext - ext. |
| Hh3cDot11SSIDStringType | OCTET STRING | current | SSID is a string to identify ESS for wireless network. |
| Hh3cDot11TruthValueCM | INTEGER { dot11false(0), dot11true(1) } | current | Represents a boolean value. |
| Hh3cDot11TunnelSecSchemType | INTEGER { cleartxt(1), dtls(2), ipsec(3) } | current | Represents which security scheme option is available for CAPWAP tunnel. The following values are supported: cleartxt - No encryption protection, dtls - Encrypted by DTLS, ipsec - Encrypted by IPSEC. |
| Hh3cDot11TxPwrLevelScopeType | Integer32 | current | Represents the Tx power level scope for 802.11. |
| Hh3cDot11WorkMode | INTEGER { normal(1), monitor(2), hybrid(3) } | current | Work mode of device. In normal mode, the device will provide WLAN service. In monitor mode, the device will monitor the environment. In hybrid mode, the device will provide WLAN service while monitoring the environment. |