MIB Viewer

HH3C-DOT11-WIPS-MIB

32 objects
No module-level DESCRIPTION found.
Imported Objects
HH3C-OID-MIBhh3cDot11
SNMPv2-SMIInteger32 MODULE-IDENTITY OBJECT-TYPE TimeTicks Unsigned32
SNMPv2-TCMacAddress RowStatus TEXTUAL-CONVENTION TruthValue
Type Definitions
NameSyntaxStatusDescription
Hh3cDot11WIPSAlyAPClaRuleTypeINTEGER { rogue(1), external(2), misconfigured(3), authorized(4) }currentRepresents the category of apply AP classification rule.
Hh3cDot11WIPSAPClaAuthMethodsINTEGER { none(1), dot1x(2), psk(3), other(5) }currentRepresents the type of AP classification method.
Hh3cDot11WIPSAPClaSecurityTypeINTEGER { clear(1), wpa2(2), wpa(3), wep(9) }currentRepresents the type of AP classification security. clear 1 wpa2 2 wpa 3 wep 9
Hh3cDot11WIPSAPClassifyCmpTypeINTEGER { equal(1), include(3) }currentRepresents the compare type of AP classification method. The following values are supported: equal - equal. include - include.
Hh3cDot11WIPSAPClassifyTypeINTEGER { authorized(1), misconfigured(2), rogue(3), external(4), adhoc(5), mesh(6), potentialAuthorized(7), potentialRogue(8), potentialExternal(9), uncategorized(10) }currentRepresents the category of the AP detected by WIPS.
Hh3cDot11WIPSAPClasSsidCmpTypeINTEGER { equal(1), notequal(2), include(3), notinclude(4) }currentRepresents the compare type of AP classification ssid. The following values are supported: equal - equal. not equal - not equal. include - include. not include - not include.
Hh3cDot11WIPSAPSecurityTypeInteger32 (1..255)currentRepresents the AP security type(bitmap). The following bits are supported: first bit: none, second bit: wpa2, third bit: wpa, fourth bit: wlanex fifth bit: wep
Hh3cDot11WIPSAPTypeINTEGER { normal(1), adhoc(2), mesh(3) }currentRepresents the type of AP detected by WIPS.
Hh3cDot11WIPSAuthMethodInteger32 (1..65535)currentRepresents the key management mode(bitmap), compliant with 802.11i. The following bits are supported: first bit: none - No key management mode is specified, second bit: dot1x - 802.1X authentication. third bit: psk - Pr…
Hh3cDot11WIPSChannelInteger32 (1..224)currentRepresents the channel number.
Hh3cDot11WIPSClassifyTypeINTEGER { none(1), authorizedap(2), misconfiguredap(3), rogueap(4), externalap(5), adhoc(6), meshap(7), potentialauthorizedap(8), potentialrogueap(9), potentialexternalap(10), uncategorizedap(11), authorizedclient(12), unauthorizedclient(13), misassociaionclient(14), uncategorizedclient(15) }currentRepresents the category of the device detected by WIPS.
Hh3cDot11WIPSCtmTypeINTEGER { externalAp(1), misassociationClient(2), misconfiguredAp(3), potentialAuthorizedAp(4), potentialExternalAp(5), potentialRogueAp(6), rogueAp(7), unauthorizedClient(8), uncategorizedAp(9), uncategorizedClient(10), attack(11), adhoc(12) }currentRepresents the category of countermeasure method.
Hh3cDot11WIPSDevClassifyWayINTEGER { manual(1), invalidOUI(2), trustlist(3), blocklist(4), associated(5), userdefined(6), auto(7) }currentRepresents the method that the device is categorized.
Hh3cDot11WIPSDeviceTypeINTEGER { ap(1), client(2) }currentRepresents the type of device.
Hh3cDot11WIPSDevStatusINTEGER { active(1), inactive(2) }currentRepresents the status of devices detected by WIPS.
Hh3cDot11WIPSDtcAckTypesINTEGER { apspoof(1), clientspoof(4), weakiv(6), windowsbridge(7), fortymhz(8), omerta(11), disassoc(12), deauth(13), prohibitedchannel(14), authunencryptedap(16), authunencryptedclient(17), hotspot(18), greenmode(19), tableoverflow(20), mitm(22), wirelessbridge(23), apchannelchange(25) }currentRepresents the type of attack detect.
Hh3cDot11WIPSDtcDevTimeTypesINTEGER { deviceap(1), deviceclient(2) }currentRepresents the type of device time.
Hh3cDot11WIPSEnabledStatusINTEGER { enabled(1), disabled(2) }currentThe enable status values for objects. Values include enabled and disbaled.
Hh3cDot11WIPSEncryptMethodInteger32 (1..65535)currentRepresents the frame encryption cipher types(bitmap) for frames on IEEE 802.11 radio interfaces. The MIB defines TC by referring to the 802.11i protocol. The following bits are supported: first bit: none, second bit: we…
Hh3cDot11WIPSFldDctTypeINTEGER { associationrequest(1), authentication(2), beacon(3), blockack(4), cts(5), deauthentication(6), disassociation(7), eapolstart(8), nulldata(9), proberequest(10), reassociationrequest(11), rts(12), eapollogoff(13), eapfailure(14), eapsuccess(15) }currentRepresents the type of flood detect.
Hh3cDot11WIPSMalformedTypeINTEGER { duplicatedie(1), fatajack(2), illegalibssess(3), invalidaddresscombination(4), invalidassocreq(5), invalidauth(6), invaliddeauthcode(7), invaliddisassoccode(8), invalidhtie(9), invalidielength(10), invalidpktlength(11), nullproberesp(13), overfloweapolkey(14), overflowssid(15), redundantie(16) }currentRepresents the category of malformed packet.
Hh3cDot11WIPSManualAPTypeINTEGER { authap(1), misconfiguredap(2), rogueap(3), externalap(4) }currentRepresents the type of AP manual classification.
Hh3cDot11WIPSOuiAddressOCTET STRING (SIZE (3))currentRepresents an 802 OUI address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…
Hh3cDot11WIPSPolicyTypeValueINTEGER { classification(1), countermeasure(2), detect(3), signature(4) }currentRepresents the type of policy.
Hh3cDot11WIPSRadioTypeINTEGER { dot11a(1), dot11b(2), dot11g(4), dot11n(8), dot11gn(16), dot11an(32), dot11ac(64), dot11gac(128) }currentRepresents AP 802.11 radio type of 802.11a/b/g/n as per the standard. The following values are supported: dot11a - 802.11a dot11b - 802.11b dot11g - 802.11g dot11n - 802.11n dot11gn - 802.11gn dot11an - 802.11an dot11ac…
Hh3cDot11WIPSRtLmtTypeINTEGER { ap(1), client(4) }currentRepresents the type of rate limit configuration.
Hh3cDot11WIPSRuleTypesINTEGER { signature(4), apclassfication(5) }currentRepresents the type of rule
Hh3cDot11WIPSSigFrameSubTypesINTEGER { assocerq(1), assocresp(2), probereq(3), beacon(4), disasso(5), auth(6), deauth(7) }currentRepresents the type of signature manage frame configuration.
Hh3cDot11WIPSSigFrameTypesINTEGER { management(1), control(2), data(3) }currentRepresents the type of signature frame configuration.
Hh3cDot11WIPSSigMacMacTypeINTEGER { source(1), destination(2), bssid(3) }currentRepresents the mac type of signature ssid configuration.
Hh3cDot11WIPSSigSsidMatchTypesINTEGER { equal(1), notequal(2), include(3), notinclude(4) }currentRepresents the match type of signature ssid configuration.
Hh3cDot11WIPSStaClassifyTypeINTEGER { authorized(1), unauthorized(2), misassociated(3), uncategorized(4) }currentRepresents the category of the client detected by WIPS.
MIB Viewer