HH3C-PPP-OVER-SONET-MIB
51 objects
This MIB manages POS(PPP Over Sonet)interfaces by providing an operational table which controls parameters of each POS interface and reports alarm conditions.
Imported Objects
| HH3C-OID-MIB | hh3cCommon |
| IF-MIB | ifDescr ifIndex |
| SNMPv2-SMI | Counter64 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE |
| SNMPv2-TC | DisplayString TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.25506.2.19 | Identityhh3cPos | This MIB manages POS(PPP Over Sonet)interfaces by providing an operational table which controls parameters of each POS interface and reports alarm conditions. | ||
| 1.3.6.1.4.1.25506.2.19.1 | Nodehh3cPosMIBObjects | |||
| 1.3.6.1.4.1.25506.2.19.1.1 | Tablehh3cPosParamTable | not-accessible | current | The pos parameter table. |
| 1.3.6.1.4.1.25506.2.19.1.1.1 | Rowhh3cPosParamTableEntry | not-accessible | current | The entry of pos table. |
| 1.3.6.1.4.1.25506.2.19.1.1.1.1 | Columnhh3cPosCRC | read-write | current | The length of CRC |
| 1.3.6.1.4.1.25506.2.19.1.1.1.2 | Columnhh3cPosMTU | read-write | current | Maximum Transfer Unit (MTU) of POS interface |
| 1.3.6.1.4.1.25506.2.19.1.1.1.3 | Columnhh3cPosScramble | read-write | current | Scrambling is used to avoid continuous 0 or 1 in signals. This object is to decide whether to scramble or not |
| 1.3.6.1.4.1.25506.2.19.1.1.1.4 | Columnhh3cPosClockSource | read-write | current | The value indicates the source of clock signal. System indicates that clock signals are from device itself and line for clock signals from remote |
| 1.3.6.1.4.1.25506.2.19.1.1.1.5 | Columnhh3cPosSdhFlagJ0 | read-write | current | The section trace byte. This node is used when the frame type is sdh. |
| 1.3.6.1.4.1.25506.2.19.1.1.1.6 | Columnhh3cPosSdhFlagJ1 | read-write | current | The path trace byte. This node is used when the frame type is sdh. |
| 1.3.6.1.4.1.25506.2.19.1.1.1.7 | Columnhh3cPosSonetFlagJ0 | read-write | current | The section trace byte. This node is used when the frame type is sonet. |
| 1.3.6.1.4.1.25506.2.19.1.1.1.8 | Columnhh3cPosSonetFlagJ1 | read-write | current | The path trace byte. This node is used when the frame type is sonet. |
| 1.3.6.1.4.1.25506.2.19.1.1.1.9 | Columnhh3cPosFlagC2 | read-write | current | The parameter for the channel signal value of C2 byte |
| 1.3.6.1.4.1.25506.2.19.1.1.1.10 | Columnhh3cPosFrameType | read-write | current | The frame type that encapsulates the packet. Default frame type is sdh(Synchronous Digital Hierarchy) It also can be configured using sonet type(Synchronous Op… |
| 1.3.6.1.4.1.25506.2.19.1.1.1.11 | Columnhh3cPosBindVlanId | read-write | current | The vlan that this pos port binds. The vlan can not include any other port, otherwise error will be returned. If the vlan has a virtual interface, the status o… |
| 1.3.6.1.4.1.25506.2.19.1.1.1.12 | Columnhh3cPosEncapsulation | read-write | current | The type of encapsulation |
| 1.3.6.1.4.1.25506.2.19.1.1.1.13 | Columnhh3cPoskeepaliveTimeout | read-write | current | The keeplive of ppp, hdlc, fr or mfr. It is the query interval of link status. Two members of a link should have same keeplive. The default 0 prohibits detecti… |
| 1.3.6.1.4.1.25506.2.19.1.1.1.14 | Columnhh3cPosBERthresholdSF | read-write | current | The bit-error rate threshold for Signal Fault. SF threshold should be greater than SD threshold. |
| 1.3.6.1.4.1.25506.2.19.1.1.1.15 | Columnhh3cPosBERthresholdSD | read-write | current | The bit-error rate threshold for Signal Degrade. SD threshold should be less than SF threshold. |
| 1.3.6.1.4.1.25506.2.19.1.1.1.16 | Columnhh3cPosB1Error | read-only | current | Counter for SBIPE(Section Bit Interleave Parity Error) |
| 1.3.6.1.4.1.25506.2.19.1.1.1.17 | Columnhh3cPosB2Error | read-only | current | Counter for LBIPE(Line Bit Interleave Parity Error) |
| 1.3.6.1.4.1.25506.2.19.1.1.1.18 | Columnhh3cPosB3Error | read-only | current | Counter for PBIPE(Path Bit Interleave Parity Error) |
| 1.3.6.1.4.1.25506.2.19.1.1.1.19 | Columnhh3cPosM1Error | read-only | current | How many times does LREI(Line Remote Error Indication) occur |
| 1.3.6.1.4.1.25506.2.19.1.1.1.20 | Columnhh3cPosG1Error | read-only | current | How many times does PREI(Path Remote Error Indication) occur |
| 1.3.6.1.4.1.25506.2.19.1.1.1.21 | Columnhh3cPosFlagJ0Type | read-write | current | The frame type that encapsulates the flag J0. Default frame type is sdh(Synchronous Digital Hierarchy). It also can be configured using sonet(Synchronous Optic… |
| 1.3.6.1.4.1.25506.2.19.1.1.1.22 | Columnhh3cPosFlagJ1Type | read-write | current | The frame type that encapsulates the flag J1. Default frame type is sdh(Synchronous Digital Hierarchy). It also can be configured using sonet(Synchronous Optic… |
| 1.3.6.1.4.1.25506.2.19.1.1.1.23 | Columnhh3cPosB1TCAThreshold | read-write | current | Threshold for B1 TCA. |
| 1.3.6.1.4.1.25506.2.19.1.1.1.24 | Columnhh3cPosB2TCAThreshold | read-write | current | Threshold for B2 TCA. |
| 1.3.6.1.4.1.25506.2.19.1.1.1.25 | Columnhh3cPosB3TCAThreshold | read-write | current | Threshold for B3 TCA. |
| 1.3.6.1.4.1.25506.2.19.1.1.1.26 | Columnhh3cPosB1TCAEnable | read-write | current | Enable traps of B1 TCA. |
| 1.3.6.1.4.1.25506.2.19.1.1.1.27 | Columnhh3cPosB2TCAEnable | read-write | current | Enable traps of B2 TCA. |
| 1.3.6.1.4.1.25506.2.19.1.1.1.28 | Columnhh3cPosB3TCAEnable | read-write | current | Enable traps of B3 TCA. |
| 1.3.6.1.4.1.25506.2.19.2 | Nodehh3cPosMIBNotificationsPrefix | |||
| 1.3.6.1.4.1.25506.2.19.2.0 | Nodehh3cPosMIBNotifications | |||
| 1.3.6.1.4.1.25506.2.19.2.0.1 | Notificationhh3cPosLOSAlarm | current | Alarm indicates loss of signal | |
| 1.3.6.1.4.1.25506.2.19.2.0.2 | Notificationhh3cPosLOFAlarm | current | Alarm indicates loss of frame | |
| 1.3.6.1.4.1.25506.2.19.2.0.3 | Notificationhh3cPosOOFAlarm | current | Alarm indicates out of frame | |
| 1.3.6.1.4.1.25506.2.19.2.0.4 | Notificationhh3cPosLAISAlarm | current | Alarm when LAIS(Line Alarm Indication Signal) arrives | |
| 1.3.6.1.4.1.25506.2.19.2.0.5 | Notificationhh3cPosLRDIAlarm | current | Alarm when LRDI(Line Remote Defect Indication) arrives | |
| 1.3.6.1.4.1.25506.2.19.2.0.6 | Notificationhh3cPosPRDIAlarm | current | Alarm when PRDI(Path Remote Defect Indication) arrives | |
| 1.3.6.1.4.1.25506.2.19.2.0.7 | Notificationhh3cPosPAISAlarm | current | Alarm when PAIS(Path Alarm Indication Signal) arrives | |
| 1.3.6.1.4.1.25506.2.19.2.0.8 | Notificationhh3cPosLOPAlarm | current | Alarm indicates loss of pointer | |
| 1.3.6.1.4.1.25506.2.19.2.0.9 | Notificationhh3cPosSTIMAlarm | current | Alarm indicates inconsistency between sent and received J0 bytes. | |
| 1.3.6.1.4.1.25506.2.19.2.0.10 | Notificationhh3cPosPTIMAlarm | current | Alarm indicates inconsistency between sent and received J1 bytes. | |
| 1.3.6.1.4.1.25506.2.19.2.0.11 | Notificationhh3cPosPSLMAlarm | current | Alarm indicates a mismatched C2 byte. | |
| 1.3.6.1.4.1.25506.2.19.2.0.12 | Notificationhh3cPosLSDAlarm | current | Alarm indicates that the B2 bit-error rate exceeds SD threshold. | |
| 1.3.6.1.4.1.25506.2.19.2.0.13 | Notificationhh3cPosLSFAlarm | current | Alarm indicates that the B2 bit-error rate exceeds SF threshold. | |
| 1.3.6.1.4.1.25506.2.19.2.0.14 | Notificationhh3cPosNormalAlarm | current | Alarm indicates that the Pos interface state returns normal. | |
| 1.3.6.1.4.1.25506.2.19.2.0.15 | Notificationhh3cPosB1TCAlarm | current | Threshold crossing alarms for B1. | |
| 1.3.6.1.4.1.25506.2.19.2.0.16 | Notificationhh3cPosB2TCAlarm | current | Threshold crossing alarms for B2. | |
| 1.3.6.1.4.1.25506.2.19.2.0.17 | Notificationhh3cPosB3TCAlarm | current | Threshold crossing alarms for B3. |