HH3C-STORAGE-SNAP-MIB
157 objects
This MIB describes the general information about snap of storage device.
Imported Objects
| ENTITY-MIB | entPhysicalIndex |
| HH3C-STORAGE-REF-MIB | Hh3cExtendSelectPolicy Hh3cLvIDType Hh3cRaidIDType Hh3cStorageActionType Hh3cStorageEnableState Hh3cStorageOnlineState hh3cStorageRef |
| INET-ADDRESS-MIB | InetAddress InetAddressType |
| SNMPv2-SMI | Counter32 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE |
| SNMPv2-TC | DateAndTime RowStatus TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.25506.10.2 | Identityhh3cStorageSnap | This MIB describes the general information about snap of storage device. | ||
| 1.3.6.1.4.1.25506.10.2.1 | Nodehh3cSnapMibObjects | |||
| 1.3.6.1.4.1.25506.10.2.1.1 | Nodehh3cGlobalSnapSettingsObject | |||
| 1.3.6.1.4.1.25506.10.2.1.1.1 | Scalarhh3cAddtionalSpaceMaxSize | read-only | current | This object identifies the maximal size of snapshot resource, safecache, and Continued replication Resource . |
| 1.3.6.1.4.1.25506.10.2.1.2 | Tablehh3cSnapConfigTable | not-accessible | current | This table contains some entity to config the snapshot resources for special logic volumes. |
| 1.3.6.1.4.1.25506.10.2.1.2.1 | Rowhh3cSnapConfigEntry | not-accessible | current | An entry containing configuration about the snapshot resource. |
| 1.3.6.1.4.1.25506.10.2.1.2.1.1 | Columnhh3cSnapLvIndex | not-accessible | current | This object identifies the index of hh3cSnapConfigTable. The object identified by this index is the same object as identified by the same value of hh3cLvIndex. |
| 1.3.6.1.4.1.25506.10.2.1.2.1.2 | Columnhh3cSnapAreaId | read-only | current | This object identifies the snapshot resource of the logic volume. |
| 1.3.6.1.4.1.25506.10.2.1.2.1.3 | Columnhh3cSnapAreaAutoExpand | read-create | current | This object describes if the space of snapshot resource can be expanded automatically. |
| 1.3.6.1.4.1.25506.10.2.1.2.1.4 | Columnhh3cSnapAreaThreshold | read-create | current | If hh3cSnapAreaAutoExpand is selected, the 'hh3cSnapAreaThreshold' means the threshold of the snapshot resource. |
| 1.3.6.1.4.1.25506.10.2.1.2.1.5 | Columnhh3cSnapAreaIncSize | read-create | current | If hh3cSnapAreaAutoExpand is selected, the 'hh3cSnapAreaIncSize' means the amount of space to be allocated for each expansion. |
| 1.3.6.1.4.1.25506.10.2.1.2.1.6 | Columnhh3cSnapAreaMaxSize | read-create | current | If hh3cSnapAreaAutoExpand is selected, the 'hh3cSnapAreaIncSize' means the max size of snapshot resource. |
| 1.3.6.1.4.1.25506.10.2.1.2.1.7 | Columnhh3cSnapAreaFullDeleteTM | read-create | current | This object identifies if the snapshot resource is out of space and expand failed, if the system delete the old timemark until enough space or not. |
| 1.3.6.1.4.1.25506.10.2.1.2.1.8 | Columnhh3cSnapAreaNotify | read-create | current | This object describes if a snapshot notification should be send to the client when the system create a timemark. |
| 1.3.6.1.4.1.25506.10.2.1.2.1.9 | Columnhh3cSnapAreaStatus | read-only | current | This object describes the state of the snapshot resource. |
| 1.3.6.1.4.1.25506.10.2.1.2.1.10 | Columnhh3cSnapRaidUuid | read-create | current | This object describes the raid where the snapshot resource is created. |
| 1.3.6.1.4.1.25506.10.2.1.2.1.11 | Columnhh3cSnapRaidSize | read-only | current | This object describes the size designated when the snapshot resource is created. |
| 1.3.6.1.4.1.25506.10.2.1.2.1.12 | Columnhh3cSnapRaidSelectPolicy | read-create | current | This object describes the policy when the snapshot resource is created automatically. Note that the value can not be 'none' when the value of associated hh3cSn… |
| 1.3.6.1.4.1.25506.10.2.1.2.1.13 | Columnhh3cSnapAreaTotalSize | read-only | current | This object identifies the current total size of the snapshot resource. |
| 1.3.6.1.4.1.25506.10.2.1.2.1.14 | Columnhh3cSnapAreaFreeSize | read-only | current | This object identifies the free size of the snapshot resource. |
| 1.3.6.1.4.1.25506.10.2.1.2.1.15 | Columnhh3cSnapExtendTimes | read-only | current | This object identifies the times the snapshot resource extended. |
| 1.3.6.1.4.1.25506.10.2.1.2.1.16 | Columnhh3cSnapRowStatus | read-create | current | This object identifies the action of snapshot resource. Note that the assocai snapshot resource can not be delete when a snapshot copy is processing or the Tim… |
| 1.3.6.1.4.1.25506.10.2.1.3 | Tablehh3cSnapExpandTable | not-accessible | current | This table contains some entity to expand a snapshot resource. |
| 1.3.6.1.4.1.25506.10.2.1.3.1 | Rowhh3cSnapExpandEntry | not-accessible | current | An entry containing expand information applicable to the snapshot resource. |
| 1.3.6.1.4.1.25506.10.2.1.3.1.1 | Columnhh3cSAExpRaidUuid | not-accessible | current | This index is identical to hh3cRaidUuid in HH3C-RAID-MIB. |
| 1.3.6.1.4.1.25506.10.2.1.3.1.2 | Columnhh3cSAExpSize | read-create | current | This object describes the increased size for snapshot resource when expanded. The units is million bytes. The value is always equal to zero when read. |
| 1.3.6.1.4.1.25506.10.2.1.3.1.3 | Columnhh3cSAExpRaidSize | read-only | current | This object describes the size for snapshot resource on the raid. The units is million bytes. The value is always equal to zero when read. |
| 1.3.6.1.4.1.25506.10.2.1.3.1.4 | Columnhh3cSnapAreaExpRowStatus | read-create | current | This object describes the actions to expand the size for snap. |
| 1.3.6.1.4.1.25506.10.2.1.4 | Tablehh3cSnapCopyTable | not-accessible | current | This table contains some entity about snapshot copy. |
| 1.3.6.1.4.1.25506.10.2.1.4.1 | Rowhh3cSnapCopyEntry | not-accessible | current | An entry containing snapshot copy information applicable. |
| 1.3.6.1.4.1.25506.10.2.1.4.1.1 | Columnhh3cSnapCopyLvIndex | read-write | current | This object identifies the index of destination logic volume for snapshot copy. |
| 1.3.6.1.4.1.25506.10.2.1.4.1.2 | Columnhh3cSnapCopyPercentage | read-only | current | This object identifies the percentage of snapshot copy. The value is equal to zero if the snapshot copy has not started. When finished, the value is always equ… |
| 1.3.6.1.4.1.25506.10.2.1.4.1.3 | Columnhh3cSnapCopyStartTime | read-only | current | This object identifies the time to start the snapshot copy. |
| 1.3.6.1.4.1.25506.10.2.1.4.1.4 | Columnhh3cSnapCopySwitch | read-write | current | This object describes the actions to start or stop the snapshot copy. When read, the value of 'none' will be get. Note that if the snapshot resource of source … |
| 1.3.6.1.4.1.25506.10.2.1.5 | Tablehh3cTimeMarkConfigTable | not-accessible | current | This table contains some entity to config a TimeMark on a special logic volume. |
| 1.3.6.1.4.1.25506.10.2.1.5.1 | Rowhh3cTimeMarkConfigEntry | not-accessible | current | An entry containing config information applicable to the TimeMark. |
| 1.3.6.1.4.1.25506.10.2.1.5.1.1 | Columnhh3cTimeMarkCounts | read-write | current | This object identifies the max num of TimeMark which can be configed. |
| 1.3.6.1.4.1.25506.10.2.1.5.1.2 | Columnhh3cTimeMarkInitializeTime | read-write | current | This object identifies the date and time when the first TimeMark is created on the logic volume. |
| 1.3.6.1.4.1.25506.10.2.1.5.1.3 | Columnhh3cTimeMarkInterval | read-write | current | This object identifies the interval when the TimeMark is created automatically if the value of this object is not equal to zero. The units is second. the min v… |
| 1.3.6.1.4.1.25506.10.2.1.5.1.4 | Columnhh3cTimeMarkLastTime | read-write | current | This object identifies the date and time when the latest TimeMark is created on the logic volume. |
| 1.3.6.1.4.1.25506.10.2.1.5.1.5 | Columnhh3cTimeMarkTotal | read-only | current | This object identifies the current num of TimeMark. |
| 1.3.6.1.4.1.25506.10.2.1.5.1.6 | Columnhh3cTimeMarkSwitch | read-create | current | This object describes enable or disable TimeMark. |
| 1.3.6.1.4.1.25506.10.2.1.6 | Tablehh3cTimeMarkCreateTable | not-accessible | current | This table contains some entity to create a TimeMark on a special logic volume. |
| 1.3.6.1.4.1.25506.10.2.1.6.1 | Rowhh3cTimeMarkCreateEntry | not-accessible | current | An entry containing create information applicable to the TimeMark. |
| 1.3.6.1.4.1.25506.10.2.1.6.1.1 | Columnhh3cTimeMarkStamp | not-accessible | current | This object identifies the date and time the TimeMark is created. |
| 1.3.6.1.4.1.25506.10.2.1.6.1.2 | Columnhh3cTimeMarkComment | read-only | current | This object identifies the comment of the TimeMark. |
| 1.3.6.1.4.1.25506.10.2.1.6.1.3 | Columnhh3cTimeMarkSize | read-only | current | This object identifies the current size of the TimeMark. |
| 1.3.6.1.4.1.25506.10.2.1.6.1.4 | Columnhh3cTimeMarkRowStatus | read-create | current | This object identifies the action to create or delete the TimeMark. Note that the TimeMark can not be deleted if it is using. |
| 1.3.6.1.4.1.25506.10.2.1.7 | Tablehh3cTimeMarkCopyTable | not-accessible | current | This table contains some entity about a TimeMark copy. |
| 1.3.6.1.4.1.25506.10.2.1.7.1 | Rowhh3cTimeMarkCopyEntry | not-accessible | current | An entry containing config information applicable to the TimeMark copy. |
| 1.3.6.1.4.1.25506.10.2.1.7.1.1 | Columnhh3cTMCopyDestLvId | read-only | current | This object identifies the index of destination logic volume for TimeMark copy. |
| 1.3.6.1.4.1.25506.10.2.1.7.1.2 | Columnhh3cTMCopyPercentage | read-only | current | This object identifies the percentage of TimeMark copy. The value is equal to zero if the TimeMark copy has not started. When finished, the value is always equ… |
| 1.3.6.1.4.1.25506.10.2.1.7.1.3 | Columnhh3cTMCopyStartTime | read-only | current | This object identifies the time to start the TimeMark copy. |
| 1.3.6.1.4.1.25506.10.2.1.7.1.4 | Columnhh3cTMCopySwitch | read-write | current | This object describes the actions to start or stop the TimeMark copy. When read, the value of 'none' will be get. |
| 1.3.6.1.4.1.25506.10.2.1.8 | Tablehh3cTimeMarkRollbackTable | not-accessible | current | This table contains some entity to use a TimeMark to rollback the logic volume. |
| 1.3.6.1.4.1.25506.10.2.1.8.1 | Rowhh3cTimeMarkRollbackEntry | not-accessible | current | An entry containing config information applicable to use a TimeMark to rollback the logic volume. |
| 1.3.6.1.4.1.25506.10.2.1.8.1.1 | Columnhh3cTMRollbackPercentage | read-only | current | This object identifies the percentage of rollback. |
| 1.3.6.1.4.1.25506.10.2.1.8.1.2 | Columnhh3cTMRollbackStartTime | read-only | current | This object identifies the time to start the rollback. |
| 1.3.6.1.4.1.25506.10.2.1.8.1.3 | Columnhh3cTMRollbackSwitch | read-write | current | This object describes the actions to use a TimeMark to rollback the logic volume. Note that once you roll back, you cannot roll forward, all the later TimeMark… |
| 1.3.6.1.4.1.25506.10.2.1.9 | Tablehh3cTimeViewTable | not-accessible | current | This table contains some entity to config a TimeView on a special TimeMark. |
| 1.3.6.1.4.1.25506.10.2.1.9.1 | Rowhh3cTimeViewEntry | not-accessible | current | An entry containing config information applicable to the TimeView. |
| 1.3.6.1.4.1.25506.10.2.1.9.1.1 | Columnhh3cTimeViewStamp | not-accessible | current | This object identifies the TimeView. The object identified by this index is the same object as identified by the same value of hh3cTimeMarkStamp. |
| 1.3.6.1.4.1.25506.10.2.1.9.1.2 | Columnhh3cTimeViewID | read-only | current | This object identifies the TimeView. |
| 1.3.6.1.4.1.25506.10.2.1.9.1.3 | Columnhh3cTimeViewName | read-create | current | This object identifies the name of the TimeView. |
| 1.3.6.1.4.1.25506.10.2.1.9.1.4 | Columnhh3cTimeViewRowStatus | read-create | current | This object describes the actions to create or delete the TimeView. |
| 1.3.6.1.4.1.25506.10.2.1.10 | Tablehh3cReplicaConfigTable | not-accessible | current | This table contains some entity to config replication for a logic volume. |
| 1.3.6.1.4.1.25506.10.2.1.10.1 | Rowhh3cReplicaConfigEntry | not-accessible | current | An entry containing config information applicable to the replication for a logic volume. |
| 1.3.6.1.4.1.25506.10.2.1.10.1.1 | Columnhh3cRepLocalLvIndex | not-accessible | current | This object identifies the local logic volume that is related with replication. The object identified by this index is the same object as identified by the sam… |
| 1.3.6.1.4.1.25506.10.2.1.10.1.2 | Columnhh3cLvRepLocalWay | read-only | current | The value of 'outgoing' means the hh3cRepLocalLvIndex is the primary logic volume of replication, and the hh3cRepRemoteLvIndex is the replica logic volume. The… |
| 1.3.6.1.4.1.25506.10.2.1.10.1.3 | Columnhh3cRepLocalServerIP | read-create | current | This object identifies the ip address of local server. |
| 1.3.6.1.4.1.25506.10.2.1.10.1.4 | Columnhh3cRepLocalServerIPType | read-create | current | This object identifies the ip address type of local server. |
| 1.3.6.1.4.1.25506.10.2.1.10.1.5 | Columnhh3cRepLocalServerName | read-only | current | This object identifies the name of local server. |
| 1.3.6.1.4.1.25506.10.2.1.10.1.6 | Columnhh3cRepLocalServerUsername | read-create | current | This object identifies the username of local server. |
| 1.3.6.1.4.1.25506.10.2.1.10.1.7 | Columnhh3cRepLocalServerPassword | read-create | current | This object identifies the password of local server. |
| 1.3.6.1.4.1.25506.10.2.1.10.1.8 | Columnhh3cRepRemoteServerIP | read-create | current | This object identifies the ip address of remote server. |
| 1.3.6.1.4.1.25506.10.2.1.10.1.9 | Columnhh3cRepRemoteServerIPType | read-create | current | This object identifies the ip address type of remote server. |
| 1.3.6.1.4.1.25506.10.2.1.10.1.10 | Columnhh3cRepRemoteServerName | read-only | current | This object identifies the name of remote server. |
| 1.3.6.1.4.1.25506.10.2.1.10.1.11 | Columnhh3cRepRemoteServerUsername | read-create | current | This object identifies the username of remote server. |
| 1.3.6.1.4.1.25506.10.2.1.10.1.12 | Columnhh3cRepRemoteServerPassword | read-create | current | This object identifies the password of remote server. |
| 1.3.6.1.4.1.25506.10.2.1.10.1.13 | Columnhh3cRepRemoteLvIndex | read-create | current | This object identifies the logic volume of remote server. |
| 1.3.6.1.4.1.25506.10.2.1.10.1.14 | Columnhh3cReplicaMode | read-create | current | This object identifies the replication mode: The value of 'adaptive' means that data from the primary resource is continuously replicated to a replica resource… |
| 1.3.6.1.4.1.25506.10.2.1.10.1.15 | Columnhh3cReplicaWatermark | read-create | current | This object identifies the size of watermark which means a replication is scheduled. |
| 1.3.6.1.4.1.25506.10.2.1.10.1.16 | Columnhh3cReplicaWatermarkRetry | read-create | current | If the 'hh3cReplicaWatermark' is set, This object identifies the interval time to retry if the last replication is failed. The units is minute. |
| 1.3.6.1.4.1.25506.10.2.1.10.1.17 | Columnhh3cReplicaInitializeTime | read-create | current | This object identifies the time to start an initial replication. |
| 1.3.6.1.4.1.25506.10.2.1.10.1.18 | Columnhh3cReplicaInterval | read-create | current | This object identifies how often the replication should be repeated after initial replication. The units is minute. |
| 1.3.6.1.4.1.25506.10.2.1.10.1.19 | Columnhh3cReplicaEncrypt | read-create | current | This object identifies the encrypt option is enable or diable. |
| 1.3.6.1.4.1.25506.10.2.1.10.1.20 | Columnhh3cReplicaCompress | read-create | current | This object identifies the compress option is enable or diable. |
| 1.3.6.1.4.1.25506.10.2.1.10.1.21 | Columnhh3cReplicaUseExistTM | read-create | current | This object identifies if using the exist TimeMark to replicate or not. |
| 1.3.6.1.4.1.25506.10.2.1.10.1.22 | Columnhh3cReplicaProtocol | read-create | current | This object identifies the protocol about replication. The value 'tcp' means Transmission Control Protocol, and 'rudp' means Reliable User Datagram Protocol. |
| 1.3.6.1.4.1.25506.10.2.1.10.1.23 | Columnhh3cReplicaScanDiff | read-create | current | This object identifies the system to scan both the primary and replica resource to determine how much data needs to be synchronized. |
| 1.3.6.1.4.1.25506.10.2.1.10.1.24 | Columnhh3cReplicaStatSwitch | read-create | current | This object identifies the action how to operate the replica. When read , a value of 'none' will be get. The value of 'promte' means remove the replication rel… |
| 1.3.6.1.4.1.25506.10.2.1.10.1.25 | Columnhh3cReplicaRowStatus | read-create | current | This object identifies the action to enable or disable the replication. |
| 1.3.6.1.4.1.25506.10.2.1.11 | Tablehh3cReplicaStateTable | not-accessible | current | This table contains some entity to show replication state. |
| 1.3.6.1.4.1.25506.10.2.1.11.1 | Rowhh3cReplicaStateEntry | not-accessible | current | An entry containing show information applicable to the replication state. |
| 1.3.6.1.4.1.25506.10.2.1.11.1.1 | Columnhh3cReplicaDelta | read-only | current | This object identifies the size of delta data after last sync. |
| 1.3.6.1.4.1.25506.10.2.1.11.1.2 | Columnhh3cReplicaLastSyncTime | read-only | current | This object identifies the date and time when last sync is taken. |
| 1.3.6.1.4.1.25506.10.2.1.11.1.3 | Columnhh3cReplicaNextSyncTime | read-only | current | This object identifies the date and time when next sync will be taken. |
| 1.3.6.1.4.1.25506.10.2.1.11.1.4 | Columnhh3cReplicaSyncTotalSize | read-only | current | This object identifies how much data need to be synchronized to the replica resource for current replication. |
| 1.3.6.1.4.1.25506.10.2.1.11.1.5 | Columnhh3cReplicaSyncCurPercentage | read-only | current | This object identifies how much data has been synchronized to the replica resource for current replication. |
| 1.3.6.1.4.1.25506.10.2.1.11.1.6 | Columnhh3cReplicaSyncPerformance | read-only | current | This object identifies the performance of the synchronize. The unit is MB/s. |
| 1.3.6.1.4.1.25506.10.2.1.11.1.7 | Columnhh3cReplicaRunStatus | read-only | current | This object identifies the state of the replica. |
| 1.3.6.1.4.1.25506.10.2.1.12 | Tablehh3cCDRConfigTable | not-accessible | current | This table contains some entity to config Continuous Replication Resource. |
| 1.3.6.1.4.1.25506.10.2.1.12.1 | Rowhh3cCDRConfigEntry | not-accessible | current | An entry containing some information applicable to Continuous Replication Resource of the logic volume. |
| 1.3.6.1.4.1.25506.10.2.1.12.1.1 | Columnhh3cCDRLvIndex | not-accessible | current | This object identifies the source logic volume of the Continuous Replication Resource. The object identified by this index is the same object as identified by … |
| 1.3.6.1.4.1.25506.10.2.1.12.1.2 | Columnhh3cCDRID | read-only | current | This object identifies the Continuous Replication Resource. |
| 1.3.6.1.4.1.25506.10.2.1.12.1.3 | Columnhh3cCDRStatus | read-only | current | This object identifies the state of the Continuous Replication Resource. |
| 1.3.6.1.4.1.25506.10.2.1.12.1.4 | Columnhh3cCDRTotalSize | read-only | current | This object identifies the total size of the Continuous Replication Resource. |
| 1.3.6.1.4.1.25506.10.2.1.12.1.5 | Columnhh3cCDRFreeSize | read-only | current | This object identifies the free size of the Continuous Replication Resource. |
| 1.3.6.1.4.1.25506.10.2.1.12.1.6 | Columnhh3cCDRSelectPolicy | read-create | current | This object describes the policy about allocating the space for Continuous Replication Resource. |
| 1.3.6.1.4.1.25506.10.2.1.12.1.7 | Columnhh3cCDRRowStatus | read-create | current | This object identifies the action to create or delete the Continuous Replication Resource. |
| 1.3.6.1.4.1.25506.10.2.1.13 | Tablehh3cCDRDistributeTable | not-accessible | current | This table contains some entity to config the distribution of Continuous Replication Resource. |
| 1.3.6.1.4.1.25506.10.2.1.13.1 | Rowhh3cCDRDistributeEntry | not-accessible | current | An entry containing some information applicable to the distribution of Continuous Replication Resource. |
| 1.3.6.1.4.1.25506.10.2.1.13.1.1 | Columnhh3cCDRDistLvIndex | not-accessible | current | This index is identical to hh3cLvIndex in HH3C-LOGIC-VOLUME-MIB. |
| 1.3.6.1.4.1.25506.10.2.1.13.1.2 | Columnhh3cCDRRaidUuid | not-accessible | current | This index is identical to hh3cRaidUuid in HH3C-RAID-MIB. |
| 1.3.6.1.4.1.25506.10.2.1.13.1.3 | Columnhh3cCDRRaidSize | read-create | current | This object identifies the size on the special raid distributed for the Continuous Replication Resource. |
| 1.3.6.1.4.1.25506.10.2.1.13.1.4 | Columnhh3cCDRExtRowStatus | read-create | current | This object identifies the action to create the distribution for the Continuous Replication Resource. |
| 1.3.6.1.4.1.25506.10.2.1.14 | Tablehh3cSafeCacheConfigTable | not-accessible | current | This table contains some entity to config SafeCache. |
| 1.3.6.1.4.1.25506.10.2.1.14.1 | Rowhh3cSafeCacheConfigEntry | not-accessible | current | An entry containing some information applicable to SafeCache of the logic volume. |
| 1.3.6.1.4.1.25506.10.2.1.14.1.1 | Columnhh3cSafeCacheLvIndex | not-accessible | current | This object identifies the source logic volume of the SafeCache. The object identified by this index is the same object as identified by the same value of hh3c… |
| 1.3.6.1.4.1.25506.10.2.1.14.1.2 | Columnhh3cSafeCacheID | read-only | current | This object identifies a SafeCache. |
| 1.3.6.1.4.1.25506.10.2.1.14.1.3 | Columnhh3cSafeCacheStatus | read-only | current | This object identifies the state of the SafeCache. |
| 1.3.6.1.4.1.25506.10.2.1.14.1.4 | Columnhh3cSafeCacheTotalSize | read-only | current | This object identifies the total size of the SafeCache. The units is million bytes. |
| 1.3.6.1.4.1.25506.10.2.1.14.1.5 | Columnhh3cSafeCacheFreeSize | read-only | current | This object identifies the free size of the SafeCache. The units is million bytes. |
| 1.3.6.1.4.1.25506.10.2.1.14.1.6 | Columnhh3cSafeCacheSelectPolicy | read-create | current | This object describes the policy about allocating the space for SafeCache. |
| 1.3.6.1.4.1.25506.10.2.1.14.1.7 | Columnhh3cSafeCacheThreshold | read-create | current | This object identifies the maximal percentage of date changed before data flushing. |
| 1.3.6.1.4.1.25506.10.2.1.14.1.8 | Columnhh3cSafeCacheFlushTime | read-create | current | This object identifies the period during which the date can stay in cache before data flushing. The units is second. |
| 1.3.6.1.4.1.25506.10.2.1.14.1.9 | Columnhh3cSafeCacheFlushCommand | read-create | current | This object identifies the number of commands when data flushing. |
| 1.3.6.1.4.1.25506.10.2.1.14.1.10 | Columnhh3cSafeCacheSkipDupWrite | read-create | current | This object identifies skip duplicate write commands or not. |
| 1.3.6.1.4.1.25506.10.2.1.14.1.11 | Columnhh3cSafeCacheRunStatus | read-only | current | This object identifies the run state of the SafeCache. |
| 1.3.6.1.4.1.25506.10.2.1.14.1.12 | Columnhh3cSafeCacheSwitch | read-create | current | This object identifies the action of the SafeCache. The value 'suspend' means suspend the SafeCache. The value 'resume' means resume the SafeCache. |
| 1.3.6.1.4.1.25506.10.2.1.14.1.13 | Columnhh3cSafeCacheRowStatus | read-create | current | This object identifies the action to create or delete the SafeCache. |
| 1.3.6.1.4.1.25506.10.2.1.15 | Tablehh3cSafeCacheDistributeTable | not-accessible | current | This table contains some entity to config the SafeCache resource. |
| 1.3.6.1.4.1.25506.10.2.1.15.1 | Rowhh3cSafeCacheDistributeEntry | not-accessible | current | An entry containing some information applicable to SafeCache resource of the logic volume. |
| 1.3.6.1.4.1.25506.10.2.1.15.1.1 | Columnhh3cSafeCacheDistLvIndex | not-accessible | current | This index is identical to hh3cLvIndex in HH3C-LOGIC-VOLUME-MIB. |
| 1.3.6.1.4.1.25506.10.2.1.15.1.2 | Columnhh3cSafeCacheRaidUuid | not-accessible | current | This index is identical to hh3cRaidUuid in HH3C-RAID-MIB. |
| 1.3.6.1.4.1.25506.10.2.1.15.1.3 | Columnhh3cSafeCacheRaidSize | read-create | current | This object identifies the size on the special raid distributed for the SafeCache resource. |
| 1.3.6.1.4.1.25506.10.2.1.15.1.4 | Columnhh3cSafeCacheExtRowStatus | read-create | current | This object identifies the action to create the distribution for the SafeCache resource. |
| 1.3.6.1.4.1.25506.10.2.1.16 | Tablehh3cMirrorConfigTable | not-accessible | current | This table contains some entity to config mirror. |
| 1.3.6.1.4.1.25506.10.2.1.16.1 | Rowhh3cMirrorConfigEntry | not-accessible | current | An entry containing some information applicable to mirror for the logic volume. |
| 1.3.6.1.4.1.25506.10.2.1.16.1.1 | Columnhh3cMirrorLvIndex | not-accessible | current | This object identifies the source logic volume of the mirror. The object identified by this index is the same object as identified by the same value of hh3cLvi… |
| 1.3.6.1.4.1.25506.10.2.1.16.1.2 | Columnhh3cMirrorType | read-only | current | This object identifies the type of the mirror. |
| 1.3.6.1.4.1.25506.10.2.1.16.1.3 | Columnhh3cMirrorStatus | read-only | current | This object identifies the state of the mirror resource. |
| 1.3.6.1.4.1.25506.10.2.1.16.1.4 | Columnhh3cMirrorName | read-create | current | This object identifies the name of the mirror resource. it is used when promote mirror resource. |
| 1.3.6.1.4.1.25506.10.2.1.16.1.5 | Columnhh3cMirrorSyncPercentage | read-only | current | This object identifies the percentage of the mirror sync. |
| 1.3.6.1.4.1.25506.10.2.1.16.1.6 | Columnhh3cMirrorSyncPerformance | read-only | current | This object identifies the performance of the mirror sync. The unit is MB/S |
| 1.3.6.1.4.1.25506.10.2.1.16.1.7 | Columnhh3cMirrorDelta | read-only | current | This object identifies size of delta data after the last mirror sync. |
| 1.3.6.1.4.1.25506.10.2.1.16.1.8 | Columnhh3cMirrorRaidType | read-create | current | This object identifies the raid type of the mirror resource. |
| 1.3.6.1.4.1.25506.10.2.1.16.1.9 | Columnhh3cMirrorSelectPolicy | read-create | current | This object describes the policy about allocating the space for mirror resource. |
| 1.3.6.1.4.1.25506.10.2.1.16.1.10 | Columnhh3cMirrorSwitch | read-create | current | This object identifies the state of the mirror. The value of 'sync' means synchronize mannually. The value of 'swap' means switch the roles of the primary reso… |
| 1.3.6.1.4.1.25506.10.2.1.16.1.11 | Columnhh3cMirrorExtendRaidUuid | read-create | current | This object identifies the raid of the mirror resource when the primary logic volume resource is extended. |
| 1.3.6.1.4.1.25506.10.2.1.16.1.12 | Columnhh3cMirrorRowStatus | read-create | current | This object identifies the action to create or delete the mirror resource. |
| 1.3.6.1.4.1.25506.10.2.1.17 | Tablehh3cMirrorDistributeTable | not-accessible | current | This table contains some entity to config the mirror resource. |
| 1.3.6.1.4.1.25506.10.2.1.17.1 | Rowhh3cMirrorDistributeEntry | not-accessible | current | An entry containing some information applicable to mirror resource for the logic volume. |
| 1.3.6.1.4.1.25506.10.2.1.17.1.1 | Columnhh3cMirrorDistLvIndex | not-accessible | current | This index is identical to hh3cLvIndex in HH3C-LOGIC-VOLUME-MIB. |
| 1.3.6.1.4.1.25506.10.2.1.17.1.2 | Columnhh3cMirrorRaidUuid | not-accessible | current | This index is identical to hh3cRaidUuid in HH3C-RAID-MIB. |
| 1.3.6.1.4.1.25506.10.2.1.17.1.3 | Columnhh3cMirrorRaidSize | read-create | current | This object identifies the size on the special raid distributed for the mirror resource. |
| 1.3.6.1.4.1.25506.10.2.1.17.1.4 | Columnhh3cMirrorExtRowStatus | read-create | current | This object identifies the action to create or delete the distribution for the mirror resource. |