HH3C-TRANSCEIVER-INFO-MIB
51 objects
The objects in this MIB module are used to display the information of transceiver on interface.
Imported Objects
| HH3C-OID-MIB | hh3cCommon |
| IF-MIB | ifIndex |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.25506.2.70 | Identityhh3cTransceiver | The objects in this MIB module are used to display the information of transceiver on interface. | ||
| 1.3.6.1.4.1.25506.2.70.1 | Nodehh3cTransceiverInfoAdm | |||
| 1.3.6.1.4.1.25506.2.70.1.1 | Tablehh3cTransceiverInfoTable | not-accessible | current | This table shows transceiver information on an interface. |
| 1.3.6.1.4.1.25506.2.70.1.1.1 | Rowhh3cTransceiverInfoEntry | not-accessible | current | The entry of the hh3cTransceiverInfoTable. |
| 1.3.6.1.4.1.25506.2.70.1.1.1.1 | Columnhh3cTransceiverHardwareType | read-only | current | Hardware type of the interface, such as SM(single mode). |
| 1.3.6.1.4.1.25506.2.70.1.1.1.2 | Columnhh3cTransceiverType | read-only | current | Type of the interface, such as SFP/XFP/GBIC. |
| 1.3.6.1.4.1.25506.2.70.1.1.1.3 | Columnhh3cTransceiverWaveLength | read-only | current | Wave length of the interface, measured in nanometer. |
| 1.3.6.1.4.1.25506.2.70.1.1.1.4 | Columnhh3cTransceiverVendorName | read-only | current | Vendor name of the interface. |
| 1.3.6.1.4.1.25506.2.70.1.1.1.5 | Columnhh3cTransceiverSerialNumber | read-only | current | Serial number of the interface. |
| 1.3.6.1.4.1.25506.2.70.1.1.1.6 | Columnhh3cTransceiverFiberDiameterType | read-only | current | The diameter of the fiber, measured in micron. fiber9 - 9 micron multi-mode fiber fiber50 - 50 micron multi-mode fiber fiber625 - 62.5 micron multi-mode fiber … |
| 1.3.6.1.4.1.25506.2.70.1.1.1.7 | Columnhh3cTransceiverTransferDistance | read-only | current | The maximum distance which the interface can transmit, measured in meter. |
| 1.3.6.1.4.1.25506.2.70.1.1.1.8 | Columnhh3cTransceiverDiagnostic | read-only | current | Indicating the digital diagnostic monitoring function. |
| 1.3.6.1.4.1.25506.2.70.1.1.1.9 | Columnhh3cTransceiverCurTXPower | read-only | current | Indicating the current transmitted power. The unit is in hundredths of dBM. |
| 1.3.6.1.4.1.25506.2.70.1.1.1.10 | Columnhh3cTransceiverMaxTXPower | read-only | current | Indicating the maximum transmitted power. The unit is in hundredths of dBM. |
| 1.3.6.1.4.1.25506.2.70.1.1.1.11 | Columnhh3cTransceiverMinTXPower | read-only | current | Indicating the minimum transmitted power. The unit is in hundredths of dBM. |
| 1.3.6.1.4.1.25506.2.70.1.1.1.12 | Columnhh3cTransceiverCurRXPower | read-only | current | Indicating the current received power. The unit is in hundredths of dBM. |
| 1.3.6.1.4.1.25506.2.70.1.1.1.13 | Columnhh3cTransceiverMaxRXPower | read-only | current | Indicating the maximum received power. The unit is in hundredths of dBM. |
| 1.3.6.1.4.1.25506.2.70.1.1.1.14 | Columnhh3cTransceiverMinRXPower | read-only | current | Indicating the minimum received power. The unit is in hundredths of dBM. |
| 1.3.6.1.4.1.25506.2.70.1.1.1.15 | Columnhh3cTransceiverTemperature | read-only | current | Indicating the current temperature. The unit is Celsius centigrade. |
| 1.3.6.1.4.1.25506.2.70.1.1.1.16 | Columnhh3cTransceiverVoltage | read-only | current | Indicating the current voltage. The unit is in hundredths of V |
| 1.3.6.1.4.1.25506.2.70.1.1.1.17 | Columnhh3cTransceiverBiasCurrent | read-only | current | Indicating the current bias electric current. The unit is in hundredths of mA |
| 1.3.6.1.4.1.25506.2.70.1.1.1.18 | Columnhh3cTransceiverTempHiAlarm | read-only | current | Transceiver temperature high alarm threshold limit in thousandths of degrees Celsius. As an example: 49120 is 49.120 degrees Celsius. |
| 1.3.6.1.4.1.25506.2.70.1.1.1.19 | Columnhh3cTransceiverTempLoAlarm | read-only | current | Transceiver temperature low alarm threshold limit in thousandths of degrees Celsius. As an example: 49120 is 49.120 degrees Celsius. |
| 1.3.6.1.4.1.25506.2.70.1.1.1.20 | Columnhh3cTransceiverTempHiWarn | read-only | current | Transceiver temperature high warning threshold limit in thousandths of degrees Celsius. As an example: 49120 is 49.120 degrees Celsius. |
| 1.3.6.1.4.1.25506.2.70.1.1.1.21 | Columnhh3cTransceiverTempLoWarn | read-only | current | Transceiver temperature low warning threshold limit in thousandths of degrees Celsius. As an example: 49120 is 49.120 degrees Celsius. |
| 1.3.6.1.4.1.25506.2.70.1.1.1.22 | Columnhh3cTransceiverVccHiAlarm | read-only | current | Transceiver VCC high alarm threshold limit in hundreds of microvolts. As an example: 32928 is 3.2928 volts. Returns zero if not supported on the transceiver. |
| 1.3.6.1.4.1.25506.2.70.1.1.1.23 | Columnhh3cTransceiverVccLoAlarm | read-only | current | Transceiver VCC low alarm threshold limit in hundreds of microvolts. As an example: 32928 is 3.2928 volts. Returns zero if not supported on the transceiver. |
| 1.3.6.1.4.1.25506.2.70.1.1.1.24 | Columnhh3cTransceiverVccHiWarn | read-only | current | Transceiver VCC high warning threshold limit in hundreds of microvolts. As an example: 32928 is 3.2928 volts. Returns zero if not supported on the transceiver. |
| 1.3.6.1.4.1.25506.2.70.1.1.1.25 | Columnhh3cTransceiverVccLoWarn | read-only | current | Transceiver VCC low warning threshold limit in hundreds of microvolts. As an example: 32928 is 3.2928 volts. Returns zero if not supported on the transceiver. |
| 1.3.6.1.4.1.25506.2.70.1.1.1.26 | Columnhh3cTransceiverBiasHiAlarm | read-only | current | Transceiver bias high alarm threshold limit in microamps. |
| 1.3.6.1.4.1.25506.2.70.1.1.1.27 | Columnhh3cTransceiverBiasLoAlarm | read-only | current | Transceiver bias low alarm threshold limit in microamps. |
| 1.3.6.1.4.1.25506.2.70.1.1.1.28 | Columnhh3cTransceiverBiasHiWarn | read-only | current | Transceiver bias high warning threshold limit in microamps. |
| 1.3.6.1.4.1.25506.2.70.1.1.1.29 | Columnhh3cTransceiverBiasLoWarn | read-only | current | Transceiver bias low warning threshold limit in microamps. |
| 1.3.6.1.4.1.25506.2.70.1.1.1.30 | Columnhh3cTransceiverPwrOutHiAlarm | read-only | current | Transceiver transmit power high alarm threshold limit in tenths of microwatts. As an example: 10000 is 1 milliwatt. |
| 1.3.6.1.4.1.25506.2.70.1.1.1.31 | Columnhh3cTransceiverPwrOutLoAlarm | read-only | current | Transceiver transmit power low alarm threshold limit in tenths of microwatts. As an example: 10000 is 1 milliwatt. |
| 1.3.6.1.4.1.25506.2.70.1.1.1.32 | Columnhh3cTransceiverPwrOutHiWarn | read-only | current | Transceiver transmit power high warning threshold limit in tenths of microwatts As an example: 10000 is 1 milliwatt. |
| 1.3.6.1.4.1.25506.2.70.1.1.1.33 | Columnhh3cTransceiverPwrOutLoWarn | read-only | current | Transceiver transmit power low warning threshold limit in tenths of microwatts. As an example: 10000 is 1 milliwatt. |
| 1.3.6.1.4.1.25506.2.70.1.1.1.34 | Columnhh3cTransceiverRcvPwrHiAlarm | read-only | current | Transceiver receive power high alarm threshold limit in tenths of microwatts. As an example: 10000 is 1 milliwatt. |
| 1.3.6.1.4.1.25506.2.70.1.1.1.35 | Columnhh3cTransceiverRcvPwrLoAlarm | read-only | current | Transceiver receive power low alarm threshold limit in tenths of microwatts. As an example: 10000 is 1 milliwatt. |
| 1.3.6.1.4.1.25506.2.70.1.1.1.36 | Columnhh3cTransceiverRcvPwrHiWarn | read-only | current | Transceiver receive power high warning threshold limit in tenths of microwatts. As an example: 10000 is 1 milliwatt. |
| 1.3.6.1.4.1.25506.2.70.1.1.1.37 | Columnhh3cTransceiverRcvPwrLoWarn | read-only | current | Transceiver receive power low warning threshold limit in tenths of microwatts. As an example: 10000 is 1 milliwatt. |
| 1.3.6.1.4.1.25506.2.70.1.1.1.38 | Columnhh3cTransceiverErrors | read-only | current | Bitmask indicating transceiver errors. Transceiver information I/O error(0) Transceiver information checksum error(1) Transceiver type and port configuration m… |
| 1.3.6.1.4.1.25506.2.70.1.1.1.39 | Columnhh3cTransceiverVendorOUI | read-only | current | Vendor OUI of the interface. |
| 1.3.6.1.4.1.25506.2.70.1.1.1.40 | Columnhh3cTransceiverRevisionNumber | read-only | current | Revision number of the interface. |
| 1.3.6.1.4.1.25506.2.70.1.2 | Tablehh3cTransceiverChannelTable | not-accessible | current | This table provides statistics about transceiver with multi-channel. |
| 1.3.6.1.4.1.25506.2.70.1.2.1 | Rowhh3cTransceiverChannelEntry | not-accessible | current | The entry of the hh3cTransceiverChannelTable. |
| 1.3.6.1.4.1.25506.2.70.1.2.1.1 | Columnhh3cTransceiverChannelIndex | not-accessible | current | The channel index of transceiver. Indicating one channel of the interface. |
| 1.3.6.1.4.1.25506.2.70.1.2.1.2 | Columnhh3cTransceiverChannelCurTXPower | read-only | current | Indicating the current transmission power. The unit is in hundredths of dBM. |
| 1.3.6.1.4.1.25506.2.70.1.2.1.3 | Columnhh3cTransceiverChannelCurRXPower | read-only | current | Indicating the current received power. The unit is in hundredths of dBM. |
| 1.3.6.1.4.1.25506.2.70.1.2.1.4 | Columnhh3cTransceiverChannelTemperature | read-only | current | Indicating the current temperature. The unit is Celsius centigrade. |
| 1.3.6.1.4.1.25506.2.70.1.2.1.5 | Columnhh3cTransceiverChannelBiasCurrent | read-only | current | Indicating the current bias electric current. The unit is in hundredths of mA. |