HHMSAGENT-MIB
178 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC-1215 | TRAP-TYPE |
| RFC1155-SMI | enterprises IpAddress |
| RFC1213-MIB | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3854 | Nodeakcp | |||
| 1.3.6.1.4.1.3854.1 | Nodehhmsagent | |||
| 1.3.6.1.4.1.3854.1.0 | NodehhmsUnknownStatus | hhmsagent status went to Unknown | ||
| 1.3.6.1.4.1.3854.1.1 | NodehhmsAgentSummary | |||
| 1.3.6.1.4.1.3854.1.1 | NodehhmsNormalStatus | hhmsagent status is Normal | ||
| 1.3.6.1.4.1.3854.1.1.1 | ScalarhhmsAgentLocation | read-write | mandatory | The Agent location |
| 1.3.6.1.4.1.3854.1.1.2 | ScalarhhmsAgentStatus | read-only | mandatory | The current status of this Agent. The status of the agent is the worst status of all the sensors usder the control of this agent. |
| 1.3.6.1.4.1.3854.1.1.4 | ScalarhhmsNumberBadSensors | read-only | mandatory | How many sensors controlled by this agent are not functioning properly |
| 1.3.6.1.4.1.3854.1.1.5 | ScalarhhmsLocationBadSensor | read-only | mandatory | The Location of the first bad sensor controlled by this agent. |
| 1.3.6.1.4.1.3854.1.1.6 | ScalarhhmsAgentManufName | read-only | mandatory | The manufacturers name |
| 1.3.6.1.4.1.3854.1.1.7 | ScalarhhmsAgentHelpUrl | read-only | mandatory | The URL of the web based help |
| 1.3.6.1.4.1.3854.1.1.8 | ScalarhhmsAgentHtmlView | read-write | mandatory | Which view of the sensors the user is served via the web server |
| 1.3.6.1.4.1.3854.1.1.9 | ScalarhhmsAgentHtmlStandardTitle | read-write | mandatory | The titles of the standard html view |
| 1.3.6.1.4.1.3854.1.1.10 | ScalarhhmsAgentHtmlStandardButton | read-write | mandatory | The buttons of the standard html view |
| 1.3.6.1.4.1.3854.1.2 | NodehhmsSensor | |||
| 1.3.6.1.4.1.3854.1.2 | NodehhmsWarningStatus | hhmsagent status went to Warning | ||
| 1.3.6.1.4.1.3854.1.2.2 | NodehhmsSensorArrayTable | |||
| 1.3.6.1.4.1.3854.1.2.2.1 | NodehhmsSensorArrayEntry | |||
| 1.3.6.1.4.1.3854.1.2.2.1.1 | ScalarhhmsSensorArrayHost | read-write | mandatory | The Host of this sensor, this is the IP address |
| 1.3.6.1.4.1.3854.1.2.2.1.2 | ScalarhhmsSensorArrayUseDHCP | read-write | mandatory | To use DHCP enter a 1, to use a static IP address enter a 2 |
| 1.3.6.1.4.1.3854.1.2.2.1.3 | ScalarhhmsSensorArrayMAC | read-only | mandatory | The MAC address of this sensor. |
| 1.3.6.1.4.1.3854.1.2.2.1.4 | ScalarhhmsSensorArraySetCommunity | read-write | mandatory | The sensorArray community string used for snmp Sets |
| 1.3.6.1.4.1.3854.1.2.2.1.5 | ScalarhhmsSensorArrayGetCommunity | read-write | mandatory | The sensorArray community string used for snmp Gets |
| 1.3.6.1.4.1.3854.1.2.2.1.6 | ScalarhhmsSensorArrayDescription | read-write | mandatory | A Description of this sensorArray |
| 1.3.6.1.4.1.3854.1.2.2.1.7 | ScalarhhmsSensorArrayLocation | read-write | mandatory | The description of the physical location of this sensorArray |
| 1.3.6.1.4.1.3854.1.2.2.1.8 | ScalarhhmsSensorArrayLastUpdate | read-only | mandatory | The last time the sensorArray was read |
| 1.3.6.1.4.1.3854.1.2.2.1.9 | ScalarhhmsSensorArrayStatus | read-only | mandatory | The current status of this sensorArray |
| 1.3.6.1.4.1.3854.1.2.2.1.10 | ScalarhhmsSensorArrayOnline | read-only | mandatory | If this sensorArray is currently online |
| 1.3.6.1.4.1.3854.1.2.2.1.11 | ScalarhhmsSensorArrayGoOnline | read-write | mandatory | To put online enter a 1, to take offline enter a 2 |
| 1.3.6.1.4.1.3854.1.2.2.1.12 | ScalarhhmsSensorArrayReadInterval | read-write | mandatory | How many seconds between readings of this sensor |
| 1.3.6.1.4.1.3854.1.2.2.1.13 | ScalarhhmsSensorArrayReceiveTimeout | read-write | mandatory | How many seconds to wait to receive data from the sensor |
| 1.3.6.1.4.1.3854.1.2.2.1.14 | ScalarhhmsSensorArrayReceiveRetries | read-write | mandatory | How many times to retry to receive data before giving up. A -1 means never give up trying |
| 1.3.6.1.4.1.3854.1.2.2.1.15 | ScalarhhmsSensorArrayVersion | read-only | mandatory | The version of this SensorArray |
| 1.3.6.1.4.1.3854.1.2.2.1.16 | TablehhmsSensorArrayTempTable | not-accessible | mandatory | This table contains the data for every Temperature Sensor in the SensorArray. Each row in the table contains data for a different Temperature Sensor. |
| 1.3.6.1.4.1.3854.1.2.2.1.16.1 | RowhhmsSensorArrayTempEntry | not-accessible | mandatory | This is an entry in the hhmsSensorArrayTempEntry Table |
| 1.3.6.1.4.1.3854.1.2.2.1.16.1.1 | ColumnhhmsSensorArrayTempDescription | read-write | mandatory | A Description of this sensor |
| 1.3.6.1.4.1.3854.1.2.2.1.16.1.2 | ColumnhhmsSensorArrayTempLocation | read-write | mandatory | The physical location of this sensor |
| 1.3.6.1.4.1.3854.1.2.2.1.16.1.3 | ColumnhhmsSensorArrayTempDegree | read-only | mandatory | The degrees in this sensor |
| 1.3.6.1.4.1.3854.1.2.2.1.16.1.4 | ColumnhhmsSensorArrayTempStatus | read-only | mandatory | The current status of this Sensor |
| 1.3.6.1.4.1.3854.1.2.2.1.16.1.5 | ColumnhhmsSensorArrayTempOnline | read-only | mandatory | If this Sensor is currently online |
| 1.3.6.1.4.1.3854.1.2.2.1.16.1.6 | ColumnhhmsSensorArrayTempGoOnline | read-write | mandatory | To put online enter a 1, to take offline enter a 2 |
| 1.3.6.1.4.1.3854.1.2.2.1.16.1.7 | ColumnhhmsSensorArrayTempHighWarning | read-write | mandatory | How hot this sensor gets before it sends a warning |
| 1.3.6.1.4.1.3854.1.2.2.1.16.1.8 | ColumnhhmsSensorArrayTempHighCritical | read-write | mandatory | How hot this sensor gets before it sends a critical event |
| 1.3.6.1.4.1.3854.1.2.2.1.16.1.9 | ColumnhhmsSensorArrayTempLowWarning | read-write | mandatory | How cold this sensor gets before it sends a warning |
| 1.3.6.1.4.1.3854.1.2.2.1.16.1.10 | ColumnhhmsSensorArrayTempLowCritical | read-write | mandatory | How cold this sensor gets before it sends a critical event |
| 1.3.6.1.4.1.3854.1.2.2.1.16.1.11 | ColumnhhmsSensorArrayTempRearm | read-write | mandatory | The number of degrees to rearm the status. For example if status goes from normal to warning, the temp must go down hhmsTempRearm degrees below warning before … |
| 1.3.6.1.4.1.3854.1.2.2.1.16.1.12 | ColumnhhmsSensorArrayTempDegreeType | read-write | mandatory | The degrees are in fahrenheit(0) or in celsius(1) |
| 1.3.6.1.4.1.3854.1.2.2.1.16.1.13 | ColumnhhmsSensorArrayTempSensorType | read-write | mandatory | The type of temperture sensor |
| 1.3.6.1.4.1.3854.1.2.2.1.16.1.14 | ColumnhhmsSensorArrayTempTestStatus | read-write | mandatory | Set the status for test purposes |
| 1.3.6.1.4.1.3854.1.2.2.1.16.1.15 | ColumnhhmsSensorArrayTempTestDegree | read-write | mandatory | Enter the degrees in this sensor for test purposes |
| 1.3.6.1.4.1.3854.1.2.2.1.16.1.16 | ColumnhhmsSensorArrayTempIndex | read-only | mandatory | The index into the temperature sensor table |
| 1.3.6.1.4.1.3854.1.2.2.1.17 | TablehhmsSensorArrayHumidityTable | not-accessible | mandatory | This table contains the data for every Humidity Sensor in the SensorArray. Each row in the table contains data for a different Humidity Sensor. |
| 1.3.6.1.4.1.3854.1.2.2.1.17.1 | RowhhmsSensorArrayHumidityEntry | not-accessible | mandatory | This is an entry in the hhmsSensorArrayHumidityEntry Table |
| 1.3.6.1.4.1.3854.1.2.2.1.17.1.1 | ColumnhhmsSensorArrayHumidityDescription | read-write | mandatory | A Description of this sensor |
| 1.3.6.1.4.1.3854.1.2.2.1.17.1.2 | ColumnhhmsSensorArrayHumidityLocation | read-write | mandatory | The physical location of this sensor |
| 1.3.6.1.4.1.3854.1.2.2.1.17.1.3 | ColumnhhmsSensorArrayHumidityPercent | read-only | mandatory | The relative humidity percentage measured by this sensor |
| 1.3.6.1.4.1.3854.1.2.2.1.17.1.4 | ColumnhhmsSensorArrayHumidityStatus | read-only | mandatory | The current status of this Sensor |
| 1.3.6.1.4.1.3854.1.2.2.1.17.1.5 | ColumnhhmsSensorArrayHumidityOnline | read-only | mandatory | If this Sensor is currently online |
| 1.3.6.1.4.1.3854.1.2.2.1.17.1.6 | ColumnhhmsSensorArrayHumidityGoOnline | read-write | mandatory | To put online enter a 1, to take offline enter a 2 |
| 1.3.6.1.4.1.3854.1.2.2.1.17.1.7 | ColumnhhmsSensorArrayHumidityHighWarning | read-write | mandatory | How high the relative humidity this sensor measures before it sends a warning |
| 1.3.6.1.4.1.3854.1.2.2.1.17.1.8 | ColumnhhmsSensorArrayHumidityHighCritical | read-write | mandatory | How high the relative humidity this sensor measures before it becomes critical |
| 1.3.6.1.4.1.3854.1.2.2.1.17.1.9 | ColumnhhmsSensorArrayHumidityLowWarning | read-write | mandatory | How low the relative humidity this sensor measures before it sends a warning |
| 1.3.6.1.4.1.3854.1.2.2.1.17.1.10 | ColumnhhmsSensorArrayHumidityLowCritical | read-write | mandatory | How low the relative humidity this sensor measures before it becomes critical |
| 1.3.6.1.4.1.3854.1.2.2.1.17.1.11 | ColumnhhmsSensorArrayHumidityRearm | read-write | mandatory | The percent relative humidity to rearm the status. For example if status goes from normal to warning, the humidity must go down hhmsHumidityRearm below warning… |
| 1.3.6.1.4.1.3854.1.2.2.1.17.1.12 | ColumnhhmsSensorArrayHumidityTestStatus | read-write | mandatory | Set the status for test purposes |
| 1.3.6.1.4.1.3854.1.2.2.1.17.1.13 | ColumnhhmsSensorArrayHumidityTestPercent | read-write | mandatory | Enter the percent of relative humidity in this sensor for test purposes |
| 1.3.6.1.4.1.3854.1.2.2.1.17.1.14 | ColumnhhmsSensorArrayHumidityIndex | read-only | mandatory | The index into the Humidity sensor table |
| 1.3.6.1.4.1.3854.1.2.2.1.18 | TablehhmsSensorArraySwitchTable | not-accessible | mandatory | This table contains the data for every Switch Sensor in the SensorArray. Each row in the table contains data for a different Switch Sensor. |
| 1.3.6.1.4.1.3854.1.2.2.1.18.1 | RowhhmsSensorArraySwitchEntry | not-accessible | mandatory | This is an entry in the hhmsSensorArraySwitchEntry Table |
| 1.3.6.1.4.1.3854.1.2.2.1.18.1.1 | ColumnhhmsSensorArraySwitchDescription | read-write | mandatory | A Description of this sensor Switch |
| 1.3.6.1.4.1.3854.1.2.2.1.18.1.2 | ColumnhhmsSensorArraySwitchLocation | read-write | mandatory | The physical location of this sensor Switch |
| 1.3.6.1.4.1.3854.1.2.2.1.18.1.3 | ColumnhhmsSensorArraySwitchStatus | read-only | mandatory | The current status of this Sensor, only input switches have a status |
| 1.3.6.1.4.1.3854.1.2.2.1.18.1.4 | ColumnhhmsSensorArraySwitchOnline | read-only | mandatory | If this Sensor is currently online |
| 1.3.6.1.4.1.3854.1.2.2.1.18.1.5 | ColumnhhmsSensorArraySwitchGoOnline | read-write | mandatory | To put online enter a 1, to take offline enter a 2 |
| 1.3.6.1.4.1.3854.1.2.2.1.18.1.6 | ColumnhhmsSensorArraySwitchDirection | read-write | mandatory | To set a switch to input enter 0. To set a switch to output enter 1 |
| 1.3.6.1.4.1.3854.1.2.2.1.18.1.7 | ColumnhhmsSensorArraySwitchNormalState | read-write | mandatory | The normal state of an input switch. If an input switch is in this state it is normal, else it is critical. An open switch senses +5 volts. A closed switch sen… |
| 1.3.6.1.4.1.3854.1.2.2.1.18.1.8 | ColumnhhmsSensorArraySwitchOutputLevel | read-write | mandatory | An output swith can be set to this level |
| 1.3.6.1.4.1.3854.1.2.2.1.18.1.9 | ColumnhhmsSensorArraySwitchTestState | read-only | mandatory | Enter the status of this Sensor for test purposes |
| 1.3.6.1.4.1.3854.1.2.2.1.18.1.10 | ColumnhhmsSensorArraySwitchIndex | read-only | mandatory | The index into the Switch sensor table |
| 1.3.6.1.4.1.3854.1.2.2.1.19 | TablehhmsSensorArraySerialTable | not-accessible | mandatory | This table contains the data for every Serial Port in the SensorArray. Each row in the table contains data for a different Serial Port. |
| 1.3.6.1.4.1.3854.1.2.2.1.19.1 | RowhhmsSensorArraySerialEntry | not-accessible | mandatory | This is an entry in the hhmsSensorArraySerialEntry Table |
| 1.3.6.1.4.1.3854.1.2.2.1.19.1.1 | ColumnhhmsSensorArraySerialDescription | read-write | mandatory | A Description of this Serial Port |
| 1.3.6.1.4.1.3854.1.2.2.1.19.1.2 | ColumnhhmsSensorArraySerialLocation | read-write | mandatory | The physical location of this Serial Port |
| 1.3.6.1.4.1.3854.1.2.2.1.19.1.3 | ColumnhhmsSensorArraySerialStatus | read-only | mandatory | The current status of this Serial Port |
| 1.3.6.1.4.1.3854.1.2.2.1.19.1.4 | ColumnhhmsSensorArraySerialOnline | read-only | mandatory | If this Serial Port is currently online |
| 1.3.6.1.4.1.3854.1.2.2.1.19.1.5 | ColumnhhmsSensorArraySerialGoOnline | read-write | mandatory | To put online enter a 1, to take offline enter a 2 |
| 1.3.6.1.4.1.3854.1.2.2.1.19.1.6 | ColumnhhmsSensorArraySerialData | read-write | mandatory | Write sends data, read gets data from this Serial Port |
| 1.3.6.1.4.1.3854.1.2.2.1.19.1.7 | ColumnhhmsSensorArraySerialBaud | read-write | mandatory | Choose the baud rate for this serial port |
| 1.3.6.1.4.1.3854.1.2.2.1.19.1.8 | ColumnhhmsSensorArraySerialDataBits | read-write | mandatory | Parity bit for this serial port |
| 1.3.6.1.4.1.3854.1.2.2.1.19.1.9 | ColumnhhmsSensorArraySerialParity | read-write | mandatory | Parity bit for this serial port |
| 1.3.6.1.4.1.3854.1.2.2.1.19.1.10 | ColumnhhmsSensorArraySerialStop | read-write | mandatory | Stop bits for this serial port |
| 1.3.6.1.4.1.3854.1.2.2.1.19.1.11 | ColumnhhmsSensorArraySerialCTS | read-write | mandatory | Turn CTS on or off for this serial port |
| 1.3.6.1.4.1.3854.1.2.2.1.19.1.12 | ColumnhhmsSensorArraySerialRTS | read-write | mandatory | Turn RTS on or off for this serial port |
| 1.3.6.1.4.1.3854.1.2.2.1.19.1.13 | ColumnhhmsSensorArraySerialConfig | read-write | mandatory | A Description of this Serial Port |
| 1.3.6.1.4.1.3854.1.2.2.1.19.1.14 | ColumnhhmsSensorArraySerialIndex | read-only | mandatory | The index into the Serial table |
| 1.3.6.1.4.1.3854.1.2.2.1.20 | ScalarhhmsSensorArrayDebug | read-write | mandatory | Turn on or off debug messages |
| 1.3.6.1.4.1.3854.1.2.2.1.21 | ScalarhhmsSensorArrayDebugIP | read-write | mandatory | The IP address to send debug messages to |
| 1.3.6.1.4.1.3854.1.2.2.1.22 | ScalarhhmsSensorArrayTrapResend | read-write | mandatory | If traps for Warning or Error should be resent. Traps for Normal status are sent once |
| 1.3.6.1.4.1.3854.1.2.2.1.23 | ScalarhhmsSensorArrayTrapResendInterval | read-write | mandatory | How often to resend mail or Traps. Enter the number of seconds from 15 to 65535. Mail for WARNING and ERROR are resent at this interval. Traps for Normal statu… |
| 1.3.6.1.4.1.3854.1.2.2.1.24 | ScalarhhmsSensorArraySendTraps | read-write | mandatory | Turn on or off the sending of traps |
| 1.3.6.1.4.1.3854.1.2.2.1.25 | ScalarhhmsSensorArrayTrapDestination | read-write | mandatory | The IP address of the trap destination |
| 1.3.6.1.4.1.3854.1.2.2.1.26 | ScalarhhmsSensorArrayTrapCommunity | read-write | mandatory | The community string of the trap destination |
| 1.3.6.1.4.1.3854.1.2.2.1.27 | ScalarhhmsSensorArrayTrapDefaultGateway | read-write | mandatory | If the trap destination is on another network, enter the IP address of the router |
| 1.3.6.1.4.1.3854.1.2.2.1.28 | ScalarhhmsSensorArrayTrapUseDefaultGateway | read-write | mandatory | If the trap destination uses the default gateway |
| 1.3.6.1.4.1.3854.1.2.2.1.29 | ScalarhhmsSensorArrayTrapDestinationMac | read-write | mandatory | If the trap destination MAC address |
| 1.3.6.1.4.1.3854.1.2.2.1.30 | ScalarhhmsSensorArraySendMail | read-write | mandatory | Turn on or off the sending of Mail |
| 1.3.6.1.4.1.3854.1.2.2.1.31 | ScalarhhmsSensorArrayMailRecpt | read-write | mandatory | The email address of the Recipient |
| 1.3.6.1.4.1.3854.1.2.2.1.32 | ScalarhhmsSensorArrayMailFrom | read-write | mandatory | The email address of the Sender |
| 1.3.6.1.4.1.3854.1.2.2.1.33 | ScalarhhmsSensorArrayMailSmpt | read-write | mandatory | The IP Address of the SMPT server. Note: This must be in dotted decimal form |
| 1.3.6.1.4.1.3854.1.2.2.1.34 | ScalarhhmsSensorArrayMailGateway | read-write | mandatory | If the smpt server is on another network, enter the IP address of the router |
| 1.3.6.1.4.1.3854.1.2.2.1.35 | ScalarhhmsSensorArrayMailUseGateway | read-write | mandatory | If the mail uses the default gateway |
| 1.3.6.1.4.1.3854.1.2.2.1.36 | ScalarhhmsSensorArrayMailResendInterval | read-write | mandatory | How often to resend mail or Traps. Enter the number of seconds from 10 to 65535. Mail for WARNING and ERROR are resent at this interval. Mail for Normal status… |
| 1.3.6.1.4.1.3854.1.2.2.1.37 | ScalarhhmsSensorArrayMailMaxResend | read-write | mandatory | The maximum number of times to resend mail. If set to 0 only send once. The maximum value is 25 |
| 1.3.6.1.4.1.3854.1.2.2.1.38 | ScalarhhmsSensorArrayMailDestinationMac | read-write | mandatory | If the mail destination MAC address, either the smpt server or the gateway |
| 1.3.6.1.4.1.3854.1.2.2.1.39 | ScalarhhmsSensorArrayMailLastStatus | read-only | mandatory | The status of the most recent attempt to send an email |
| 1.3.6.1.4.1.3854.1.2.2.1.40 | TablehhmsSensorArrayPowerControlTable | not-accessible | mandatory | This table contains the Power Control features in the sensorArray. |
| 1.3.6.1.4.1.3854.1.2.2.1.40.1 | RowhhmsSensorArrayPowerControlEntry | not-accessible | mandatory | This is an entry in the hhmsSensorArrayPowerControlEntry Table |
| 1.3.6.1.4.1.3854.1.2.2.1.40.1.1 | ColumnhhmsSensorArrayPowerModuleDescription | read-write | mandatory | A Description of this Power Module |
| 1.3.6.1.4.1.3854.1.2.2.1.40.1.2 | ColumnhhmsSensorArrayPowerModuleStatus | read-only | mandatory | The current status of this Sensor |
| 1.3.6.1.4.1.3854.1.2.2.1.40.1.3 | ColumnhhmsSensorArrayPowerModuleOnline | read-only | mandatory | If this Sensor is currently online |
| 1.3.6.1.4.1.3854.1.2.2.1.40.1.4 | ColumnhhmsSensorArrayPowerModuleGoOnline | read-write | mandatory | To put online enter a 1, to take offline enter a 2 |
| 1.3.6.1.4.1.3854.1.2.2.1.40.1.5 | ColumnhhmsSensorArrayPowerOutletDescription | read-write | mandatory | A Description of this Power Port |
| 1.3.6.1.4.1.3854.1.2.2.1.40.1.6 | ColumnhhmsSensorArrayPowerOutletStatus | read-only | mandatory | The current status of this Sensor |
| 1.3.6.1.4.1.3854.1.2.2.1.40.1.7 | ColumnhhmsSensorArrayPowerOutletSet | read-write | mandatory | The current status of this Sensor |
| 1.3.6.1.4.1.3854.1.2.2.1.40.1.8 | ColumnhhmsSensorArrayPowerControlIndex | read-only | mandatory | The index into the Power Control table |
| 1.3.6.1.4.1.3854.1.2.2.1.41 | TablehhmsSensorArrayPowerMonitorTable | not-accessible | mandatory | This table contains the Power Monitor features in the sensorArray. |
| 1.3.6.1.4.1.3854.1.2.2.1.41.1 | RowhhmsSensorArrayPowerMonitorEntry | not-accessible | mandatory | This is an entry in the hhmsSensorArrayPowerMonitorEntry Table |
| 1.3.6.1.4.1.3854.1.2.2.1.41.1.1 | ColumnhhmsSensorArrayPowerMonitorDescription | read-write | mandatory | A Description of this Power Monitor |
| 1.3.6.1.4.1.3854.1.2.2.1.41.1.2 | ColumnhhmsSensorArrayPowerMonitorCurrent | read-write | mandatory | The current in this sensor |
| 1.3.6.1.4.1.3854.1.2.2.1.41.1.3 | ColumnhhmsSensorArrayPowerMonitorVoltage | read-write | mandatory | The voltage in this sensor |
| 1.3.6.1.4.1.3854.1.2.2.1.41.1.4 | ColumnhhmsSensorArrayPowerMonitorPower | read-write | mandatory | The total energy measured so far by this sensor |
| 1.3.6.1.4.1.3854.1.2.2.1.41.1.5 | ColumnhhmsSensorArrayPowerMonitorStatus | read-only | mandatory | The current status of this Sensor |
| 1.3.6.1.4.1.3854.1.2.2.1.41.1.6 | ColumnhhmsSensorArrayPowerMonitorOnline | read-only | mandatory | If this Sensor is currently online |
| 1.3.6.1.4.1.3854.1.2.2.1.41.1.7 | ColumnhhmsSensorArrayPowerMonitorGoOnline | read-write | mandatory | To put online enter a 1, to take offline enter a 2 |
| 1.3.6.1.4.1.3854.1.2.2.1.41.1.8 | ColumnhhmsSensorArrayPowerMonitorHighWarning | read-write | mandatory | How many watts of power this sensor detects before the sensor status is set to warning |
| 1.3.6.1.4.1.3854.1.2.2.1.41.1.9 | ColumnhhmsSensorArrayPowerMonitorHighCritical | read-write | mandatory | How many watts of power this sensor detects before the sensor status is set to critical |
| 1.3.6.1.4.1.3854.1.2.2.1.41.1.10 | ColumnhhmsSensorArrayPowerMonitorLowWarning | read-write | mandatory | How many watts of power this sensor detects before the sensor status is set to warning |
| 1.3.6.1.4.1.3854.1.2.2.1.41.1.11 | ColumnhhmsSensorArrayPowerMonitorLowCritical | read-write | mandatory | How many watts of power this sensor detects before the sensor status is set to critical |
| 1.3.6.1.4.1.3854.1.2.2.1.41.1.12 | ColumnhhmsSensorArrayPowerMonitorRearm | read-write | mandatory | How many watts of power this sensor detects to rearm the status. For example if status goes from normal to warning, the temp must go down hhmsTempRearm degrees… |
| 1.3.6.1.4.1.3854.1.2.2.1.41.1.13 | ColumnhhmsSensorArrayPowerMonitorIndex | read-only | mandatory | The index into the Power table |
| 1.3.6.1.4.1.3854.1.2.2.1.42 | TablehhmsSensorArrayHighDriveTable | not-accessible | mandatory | This table contains the High Current Drivers in the sensorArray. |
| 1.3.6.1.4.1.3854.1.2.2.1.42.1 | RowhhmsSensorArrayHighDriveEntry | not-accessible | mandatory | This is an entry in the hhmsSensorArrayHighDriveEntry Table |
| 1.3.6.1.4.1.3854.1.2.2.1.42.1.1 | ColumnhhmsSensorArrayHighDriveDescription | read-write | mandatory | A Description of this Power Monitor |
| 1.3.6.1.4.1.3854.1.2.2.1.42.1.2 | ColumnhhmsSensorArrayHighDriveOutputLevel | read-write | mandatory | The Driver can be on or off. If closed the Open Collector will sink current. If open the Open Collector will tri state |
| 1.3.6.1.4.1.3854.1.2.2.1.42.1.3 | ColumnhhmsSensorArrayHighDriveIndex | read-only | mandatory | The index into the HighDrive table |
| 1.3.6.1.4.1.3854.1.2.2.1.43 | TablehhmsSensorArrayCameraTable | not-accessible | mandatory | This table contains the Camera features in the sensorArray. |
| 1.3.6.1.4.1.3854.1.2.2.1.43.1 | RowhhmsSensorArrayCameraEntry | not-accessible | mandatory | This is an entry in the hhmsSensorArrayCameraEntry Table |
| 1.3.6.1.4.1.3854.1.2.2.1.43.1.1 | ColumnhhmsSensorArrayCameraDescription | read-write | mandatory | A Description of this Camera |
| 1.3.6.1.4.1.3854.1.2.2.1.43.1.2 | ColumnhhmsSensorArrayCameraOnline | read-only | mandatory | If this Sensor is currently online |
| 1.3.6.1.4.1.3854.1.2.2.1.43.1.3 | ColumnhhmsSensorArrayCameraGoOnline | read-write | mandatory | To put online enter a 1, to take offline enter a 2 |
| 1.3.6.1.4.1.3854.1.2.2.1.43.1.4 | ColumnhhmsSensorArrayCameraUrlMain | read-write | mandatory | The URL of the Camera, for example http://10.1.1.7 |
| 1.3.6.1.4.1.3854.1.2.2.1.43.1.5 | ColumnhhmsSensorArrayCameraUrlExtension | read-write | mandatory | The cgi extension for the Picture from this Camera for example /webcam/server.jpg |
| 1.3.6.1.4.1.3854.1.2.2.1.43.1.6 | ColumnhhmsSensorArrayCameraRefreshRate | read-write | mandatory | How often to refresh the image on the browser in seconds from 5 to 254 |
| 1.3.6.1.4.1.3854.1.2.2.1.43.1.7 | ColumnhhmsSensorArrayCameraIndex | read-only | mandatory | The index into the Camera table |
| 1.3.6.1.4.1.3854.1.2.2.1.50 | ScalarhhmsSensorArrayTrapMailPollInterval | read-write | mandatory | How often the sensor thresholds are tested before sending traps or mail. This can vary from 3 to 15 seconds |
| 1.3.6.1.4.1.3854.1.2.2.1.51 | ScalarhhmsSensorArraySendTestMail | read-write | mandatory | Send out an email test message |
| 1.3.6.1.4.1.3854.1.2.2.1.52 | ScalarhhmsSensorArrayLastSystemError | read-only | mandatory | A text string containing the description of the last system error |
| 1.3.6.1.4.1.3854.1.2.2.1.53 | ScalarhhmsSensorArrayDataCollectionPeriod | read-write | mandatory | The number of minutes between collections of the data logger. This can vary from 1 to 60 minutes |
| 1.3.6.1.4.1.3854.1.2.2.1.54 | ScalarhhmsSensorArrayMailTimeout | read-write | mandatory | The number of seconds to wait for a timeout while sending email This can vary from 10 to 60 seconds |
| 1.3.6.1.4.1.3854.1.3 | NodehhmsCriticalStatus | hhmsagent status went to Critical | ||
| 1.3.6.1.4.1.3854.1.4 | NodehhmsDownStatus | hhmsagent status went to Disabled | ||
| 1.3.6.1.4.1.3854.1.5 | NodehhmsAgentConfig | |||
| 1.3.6.1.4.1.3854.1.5.1 | ScalarhhmsAgentVersion | read-only | mandatory | The hhms agent release version number |
| 1.3.6.1.4.1.3854.1.5.7 | TablehhmsCompressedSummaryTable | not-accessible | mandatory | This table contains a way to get summary info to the browser using minimum communication. One get contains a PDU info from multiple sensorArrays |
| 1.3.6.1.4.1.3854.1.5.7.1 | RowhhmsCompressedSummaryEntry | not-accessible | mandatory | This is an entry in the hhmsCompressedSummary Table |
| 1.3.6.1.4.1.3854.1.5.7.1.1 | ColumnhhmsCompressedSummaryGet | read-only | mandatory | Get multiple compressed summary PDU |
| 1.3.6.1.4.1.3854.1.5.7.1.2 | ColumnhhmsCompressedSummaryIndex | read-only | mandatory | The index into the compressed summary table |
| 1.3.6.1.4.1.3854.1.7 | NodehhmsAgentTraps | |||
| 1.3.6.1.4.1.3854.1.7.1 | ScalarhhmsSensorStatus | read-only | mandatory | The current integer status of the sensor causing this trap to be sent |
| 1.3.6.1.4.1.3854.1.7.2 | ScalarhhmsSensorValue | read-only | mandatory | The current integer value of the sensor causing this trap to be sent |
| 1.3.6.1.4.1.3854.1.7.3 | ScalarhhmsSensorLevelExceeded | read-only | mandatory | The integer level that was exceeded causing this trap to be sent |
| 1.3.6.1.4.1.3854.1.7.4 | ScalarhhmsSensorIndex | read-only | mandatory | The integer index of the sensor causing this trap to be sent |
| 1.3.6.1.4.1.3854.1.7.5 | ScalarhhmsSensorName | read-only | mandatory | The name of the sensor causing this trap to be sent |
| 1.3.6.1.4.1.3854.1.7.6 | ScalarhhmsSensorDescription | read-only | mandatory | The description of the sensor causing this trap to be sent |
| 1.3.6.1.4.1.3854.1.10 | NodehhmsTemperatureStatus | Temperature sensor trap | ||
| 1.3.6.1.4.1.3854.1.20 | NodehhmsHumidityStatus | Humidity sensor trap | ||
| 1.3.6.1.4.1.3854.1.30 | NodehhmsSwitchStatus | Switch sensor trap | ||
| 1.3.6.1.4.1.3854.1.40 | NodehhmsPowerMonitorStatus | Power Monitor sensor trap |