HIPATH-WIRELESS-DOT11-EXTNS-MIB
180 objects
This module provides extension objects to the ieee80211 MIB.
Imported Objects
| HIPATH-WIRELESS-SMI | hiPathWirelessMgmt hiPathWirelessModules |
| IEEE802dot11-MIB | dot11WEPDefaultKeyIndex |
| IF-MIB | ifIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter64 Integer32 MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString MacAddress RowStatus TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4329.15.3.1 | Nodedot11ExtnsMib | |||
| 1.3.6.1.4.1.4329.15.3.1.1 | Nodedot11Extsmt | |||
| 1.3.6.1.4.1.4329.15.3.1.1.1 | Tabledot11ExtBSSIDTable | not-accessible | current | The dot11ExtBSSIDTable contains a list of the BSS (Basic Service Set) Identifiers supported by each radio, and associates an SSID with with each BSS. |
| 1.3.6.1.4.1.4329.15.3.1.1.1.1 | Rowdot11ExtBSSIDEntry | not-accessible | current | An entry in the BSSID table. |
| 1.3.6.1.4.1.4329.15.3.1.1.1.1.1 | Columndot11ExtBSSIndex | read-only | current | A unique value, greater than zero, that identifies each Basic Service Set Identifier (BSSID) supported by a radio. |
| 1.3.6.1.4.1.4329.15.3.1.1.1.1.2 | Columndot11ExtBSSID | read-only | current | The Basic Service Set Identifier (BSSID) uniquely identifies a wireless network adapter. In the case of the AP2620, a radio can support up to 8 distinct BSSIDs. |
| 1.3.6.1.4.1.4329.15.3.1.1.1.1.3 | Columndot11ExtSSIDID | read-write | current | SSIDID is a High Path Wireless internal numeric identifier for the SSID. This number is meaningless external to the product. |
| 1.3.6.1.4.1.4329.15.3.1.1.1.1.4 | Columndot11ExtSSID | read-write | current | The Service Set Identifier (SSID) is the network name identifying the wireless network to which this adapter belongs. |
| 1.3.6.1.4.1.4329.15.3.1.1.1.1.5 | Columndot11ExtBSSIDWEPKeyIndex | read-write | current | Specifies the WEP default key associated with this BSS from the ieee802dot11 dot11WEPDefaultKeysTable. |
| 1.3.6.1.4.1.4329.15.3.1.1.1.1.6 | Columndot11ExtSSIDSuppress | read-write | current | When True, the radio will not broadcast the SSID associated with this BSSID in the beacons. |
| 1.3.6.1.4.1.4329.15.3.1.1.1.1.7 | Columndot11ExtPriorityTrafficHandling | read-write | current | When True, priority traffic handling is enabled for this BSSID. |
| 1.3.6.1.4.1.4329.15.3.1.1.2 | Tabledot11ExtWEPKeyMappingsTable | not-accessible | deprecated | The dot11ExtWEPKeyMappingsTable supports the ability to configure a separate WEP key for each BSS/Station pairing. The WEPKeyMappingValues in this table are lo… |
| 1.3.6.1.4.1.4329.15.3.1.1.2.1 | Rowdot11ExtWEPKeyMappingsEntry | not-accessible | current | An entry in the dot11ExtWEPKeyMappingsTable. |
| 1.3.6.1.4.1.4329.15.3.1.1.2.1.1 | Columndot11ExtWEPKeyMappingIndex | read-only | current | The auxiliary variable used to identify instances of the columnar objects in the WEP Key Mappings Table. |
| 1.3.6.1.4.1.4329.15.3.1.1.2.1.2 | Columndot11ExtWEPKeyMappingAddress | read-create | current | The MAC address of the STA for which the values from this key mapping entry are to be used. |
| 1.3.6.1.4.1.4329.15.3.1.1.2.1.3 | Columndot11ExtWEPKeyMappingWEPOn | read-create | current | Boolean as to whether WEP is to be used when communicating with the dot11WEPKeyMappingAddress STA. |
| 1.3.6.1.4.1.4329.15.3.1.1.2.1.4 | Columndot11ExtWEPKeyMappingValue | read-create | current | A WEP secret key value. |
| 1.3.6.1.4.1.4329.15.3.1.1.2.1.5 | Columndot11ExtWEPKeyMappingStatus | read-create | current | The status column used for creating, modifying, and deleting instances of the columnar objects in the WEP key mapping Table. |
| 1.3.6.1.4.1.4329.15.3.1.1.3 | Tabledot11CapabilitiesTable | not-accessible | current | The dot11CapabilitiesTable contains the 802.11 protocols that each radio in the accessPoint are capable of supporting. |
| 1.3.6.1.4.1.4329.15.3.1.1.3.1 | Rowdot11CapabilitiesEntry | not-accessible | current | An entry in the dot11CapabilitiesTable. |
| 1.3.6.1.4.1.4329.15.3.1.1.3.1.1 | Columndot11Capabilities | read-write | current | Describes the capabilities of a radio, for example the protocol supported. |
| 1.3.6.1.4.1.4329.15.3.1.1.4 | Tabledot11bConfigTable | not-accessible | current | The table contains configuration elements specific to the 802.11b protocol. |
| 1.3.6.1.4.1.4329.15.3.1.1.4.1 | Rowdot11bConfigEntry | not-accessible | current | The dot11bConfigTable contains configuration elements specific to the 802.11b protocol. If an attempt to read the elements is made for a radio which does not s… |
| 1.3.6.1.4.1.4329.15.3.1.1.4.1.1 | Columndot11bEnabled | read-write | current | When true, 802.1b protocol support is active on this radio. |
| 1.3.6.1.4.1.4329.15.3.1.1.4.1.2 | Columndot11BasicB | read-write | obsolete | Specifies the basic rate set for a 11b or 11b+g radio. When set to basic11b, the radio uses all four 11b rates (1, 2, 5.5 and 11 Mbps) as basic rates. When whe… |
| 1.3.6.1.4.1.4329.15.3.1.1.5 | Tabledot11gConfigTable | not-accessible | current | The dot11gConfigTable contains configuration elements specific to the 802.11g protocol. If an attempt to read the elements is made for a radio which does not s… |
| 1.3.6.1.4.1.4329.15.3.1.1.5.1 | Rowdot11gConfigEntry | not-accessible | current | An entry in the dot11gConfigTable. |
| 1.3.6.1.4.1.4329.15.3.1.1.5.1.1 | Columndot11gEnabled | read-write | current | When true, 802.1g protocol support is active on this radio. |
| 1.3.6.1.4.1.4329.15.3.1.1.5.1.3 | Columndot11gProtectionMode | read-write | current | Configures whether and when to use Protection Mode for the 802.11g transmissions. Protection Mode helps reduce collisions with legacy 802.11b stations at the e… |
| 1.3.6.1.4.1.4329.15.3.1.1.5.1.4 | Columndot11gProtectionType | read-write | current | Determines whether 802.11g Protection Mode uses a RTS-CTS sequence or a CTS-only protection mechanism when Protection Mode is enabled. |
| 1.3.6.1.4.1.4329.15.3.1.1.5.1.5 | Columndot11gProtectionRate | read-write | current | Specifies the rate to be used by RTS or CTS in protection mode. |
| 1.3.6.1.4.1.4329.15.3.1.1.5.1.6 | Columndot11gBasicG | read-write | obsolete | Specifies the set of basic rates in 11-g-only mode. Default allows all possible basic rates (1, 2, 5.5, 11, 6, 12 and 24 Mbps). Basic11 specifies only 11 rates… |
| 1.3.6.1.4.1.4329.15.3.1.1.5.1.7 | Columndot11gProtectionModeSelected | read-write | current | Protection mode selected by Access Point. Values are: off(0) = protection mode is set to off by Access Point. on(1) = protection mode is set to on by Access Po… |
| 1.3.6.1.4.1.4329.15.3.1.1.7 | Tabledot11ExtSmtTable | not-accessible | current | Extended settings table. |
| 1.3.6.1.4.1.4329.15.3.1.1.7.1 | Rowdot11ExtSmtEntry | not-accessible | current | An entry in the Extended settings table dot11ExtSmtTable. |
| 1.3.6.1.4.1.4329.15.3.1.1.7.1.1 | ColumnsmtShortPreambleInvoked | read-write | current | Specifies the type of preamble used in an 11b/g radio: always short, always long or automatically selected. |
| 1.3.6.1.4.1.4329.15.3.1.1.7.1.2 | Columndot11ExtSmtCurrentChannel | read-write | current | Specfies the current radio channel. Value of zero means 'auto' selection. |
| 1.3.6.1.4.1.4329.15.3.1.1.7.1.3 | Columndot11ExtSmtMaxBasicRate | read-write | deprecated | Specifies the maximum basic rate. |
| 1.3.6.1.4.1.4329.15.3.1.1.7.1.4 | Columndot11ExtSmtMinBasicRate | read-write | current | Specifies the minimum basic rate which is also the minimum operational rate. |
| 1.3.6.1.4.1.4329.15.3.1.1.7.1.5 | Columndot11ExtSmtMaxOperationalRate | read-write | deprecated | Specifies the maximum operational rate. |
| 1.3.6.1.4.1.4329.15.3.1.1.7.1.6 | Columndot11ExtSmtCurChanSelectedByAP | read-write | current | Current channel selected by Access Point. |
| 1.3.6.1.4.1.4329.15.3.1.1.7.1.7 | Columndot11ExtSmtRFDomain | read-write | current | Identifies a radio as belonging to an RF Domain. This is used to provide dynamic radio management when all SSIDs are suppressed. |
| 1.3.6.1.4.1.4329.15.3.1.1.7.1.8 | Columndot11ExtSmtAutoTxPowerCtrl | read-write | current | Auto Transmission Power Control. |
| 1.3.6.1.4.1.4329.15.3.1.1.7.1.9 | Columndot11ExtSmtCurrentTxPowerLevel | read-write | current | Current transmission power level of the radio. |
| 1.3.6.1.4.1.4329.15.3.1.1.7.1.10 | Columndot11ExtSmtMaxTxPower | read-write | current | Maximum transmission power level of the radio. |
| 1.3.6.1.4.1.4329.15.3.1.1.7.1.11 | Columndot11ExtSmtMinTxPower | read-write | current | Minimum transmission power level of the radio. |
| 1.3.6.1.4.1.4329.15.3.1.1.7.1.12 | Columndot11ExtSmtAutoTxPowerCtrlAdjust | read-write | current | Auto Transmission Power Control adjust. |
| 1.3.6.1.4.1.4329.15.3.1.1.7.1.13 | Columndot11ExtSmtBGretries | read-write | deprecated | Number of retries for Background traffics. |
| 1.3.6.1.4.1.4329.15.3.1.1.7.1.14 | Columndot11ExtSmtBEretries | read-write | deprecated | Number of retries for Best Efforts traffics. |
| 1.3.6.1.4.1.4329.15.3.1.1.7.1.15 | Columndot11ExtSmtVIretries | read-write | deprecated | Number of retries for Video traffics. |
| 1.3.6.1.4.1.4329.15.3.1.1.7.1.16 | Columndot11ExtSmtVOretries | read-write | deprecated | Number of retries for Voice traffics. |
| 1.3.6.1.4.1.4329.15.3.1.1.7.1.17 | Columndot11ExtSmtTVOretries | read-write | deprecated | Number of retries for Turbo Voice traffics. |
| 1.3.6.1.4.1.4329.15.3.1.1.7.1.18 | Columndot11ExtSmtDcsMode | read-write | current | DCS operation mode. |
| 1.3.6.1.4.1.4329.15.3.1.1.7.1.19 | Columndot11ExtSmtDcsNoiseThreshold | read-write | current | DCS Nose Threshould. It determines at which interface level the AP will decide to look for a ne operating channel. The unit is dBm. It is valid only when DCS o… |
| 1.3.6.1.4.1.4329.15.3.1.1.7.1.20 | Columndot11ExtSmtDcsChlOccThreshold | read-write | current | DCS Channel Occupancy Threshold. It determines at which channel utilization the AP decides to look for a new operating channel. The unit is % percentage. It is… |
| 1.3.6.1.4.1.4329.15.3.1.1.7.1.21 | Columndot11ExtSmtDcsUpdatePeriod | read-write | current | DCS Update Period. It determines the period during which the AP averages the DCS Noise Threshold & DCS channel Occupancy Threshold measurements. The unit is mi… |
| 1.3.6.1.4.1.4329.15.3.1.1.7.1.22 | Columndot11ExtSmtDcsChannelSelection | read-write | current | DCS Channel Plan Selection.It is Bitmask of: 1 = all chls (only A), 2 = 3 chls (only BG), 4 = 4 chls (only BG), 8 = auto (only BG), 16 = custom |
| 1.3.6.1.4.1.4329.15.3.1.1.7.1.23 | Columndot11ExtSmtDcsChannelList | read-write | current | DCS Channel Plan List.It is custom channel plan. It is valid only when DCS Channel Plan Selection is set to custom |
| 1.3.6.1.4.1.4329.15.3.1.1.7.1.24 | Columndot11ExtSmtRadioAttenuation | read-write | current | Attenuation of cable between external antenna and AP in db. value -1 : not configured. |
| 1.3.6.1.4.1.4329.15.3.1.1.7.1.25 | Columndot11ExtSmtProbeSuppression | read-write | current | Enables/Disables probe suppression. Default is disabled. |
| 1.3.6.1.4.1.4329.15.3.1.1.7.1.26 | Columndot11ExtSmtForceDisassociate | read-write | current | IF force-disassoc is enabled, Clients that are associated are sent a Disassoc if the averaged RSS is < RSS-threshold -5dBm (with some hysteresis). Default is d… |
| 1.3.6.1.4.1.4329.15.3.1.1.7.1.27 | Columndot11ExtSmtRssThreshold | read-write | current | The radio probe suppression RSS threshold. The range is from -50dBm to -100dBm. Default value is -90dBm. |
| 1.3.6.1.4.1.4329.15.3.1.1.8 | Tabledot11ExtVlanSmtTable | not-accessible | current | This table contains configuration about bridging mode for the radio. |
| 1.3.6.1.4.1.4329.15.3.1.1.8.1 | Rowdot11ExtVlanSmtEntry | not-accessible | current | An entry in dot11ExtVlanSmtTable table. |
| 1.3.6.1.4.1.4329.15.3.1.1.8.1.1 | ColumnvlanBridgeMode | read-write | obsolete | When true, bridging mode is enabled on this radio. |
| 1.3.6.1.4.1.4329.15.3.1.1.8.1.2 | ColumnvlanTag | read-write | obsolete | Integer specifying the VLAN tag. If untagged, returns -1. |
| 1.3.6.1.4.1.4329.15.3.1.1.10 | Tabledot11DiversityTable | not-accessible | current | List of configuration elements specific to diversity support. |
| 1.3.6.1.4.1.4329.15.3.1.1.10.1 | Rowdot11DiversityEntry | not-accessible | current | An entry in the dot11DiversityTable. |
| 1.3.6.1.4.1.4329.15.3.1.1.10.1.1 | Columndot11DiversityRxDiversity | read-write | current | Diversity support for reception. |
| 1.3.6.1.4.1.4329.15.3.1.1.10.1.2 | Columndot11DiversityTxDiversity | read-write | current | Diversity support for transmission. |
| 1.3.6.1.4.1.4329.15.3.1.1.10.1.3 | Columndot11AntennaSelection | read-write | current | Antenna Selection for transmission and reception. |
| 1.3.6.1.4.1.4329.15.3.1.1.11 | Tabledot11nConfigTable | not-accessible | current | The dot11nConfigTable contains configuration elements specific to the 802.11n protocol. If an attempt to read the elements is made for a radio which does not s… |
| 1.3.6.1.4.1.4329.15.3.1.1.11.1 | Rowdot11nConfigEntry | not-accessible | current | An entry in the dot11nConfigTable. |
| 1.3.6.1.4.1.4329.15.3.1.1.11.1.1 | Columndot11nEnabled | read-write | current | When true, 802.1n protocol support is active on this radio. |
| 1.3.6.1.4.1.4329.15.3.1.1.11.1.2 | Columndot11nChlBonding | read-write | current | 802.11n protocol Channel Bonding. |
| 1.3.6.1.4.1.4329.15.3.1.1.11.1.3 | Columndot11nChlWidth | read-write | current | 802.11n protocol Channel Width. |
| 1.3.6.1.4.1.4329.15.3.1.1.11.1.4 | Columndot11nChlGuardInterval | read-write | current | 802.11n protocol Guard Interval. |
| 1.3.6.1.4.1.4329.15.3.1.1.11.1.5 | Columndot11nProtectEnabled | read-write | current | 802.11n protocol Channel Protectino Mode. |
| 1.3.6.1.4.1.4329.15.3.1.1.11.1.6 | Columndot11nProtectType | read-write | current | 802.11n protocol 40Mhz Channel Protection Type. |
| 1.3.6.1.4.1.4329.15.3.1.1.11.1.7 | Columndot11nProtectOffset | read-write | current | 802.11n protocol 40Mhz Channel Protection Offset. |
| 1.3.6.1.4.1.4329.15.3.1.1.11.1.8 | Columndot11nPtotectBusyThr | read-write | current | 802.11n protocol 40Mhz Channel Protection Busy Threshold. |
| 1.3.6.1.4.1.4329.15.3.1.1.11.1.9 | Columndot11nAggrMsduEnabled | read-write | current | 802.11n protocol Aggregate MSDUs. |
| 1.3.6.1.4.1.4329.15.3.1.1.11.1.10 | Columndot11nAggrMsduMaxLen | read-write | current | 802.11n protocol Aggregate MSDU Max Length. |
| 1.3.6.1.4.1.4329.15.3.1.1.11.1.11 | Columndot11nAggrMpduEnabled | read-write | current | 802.11n protocol Aggregate MPDUs. |
| 1.3.6.1.4.1.4329.15.3.1.1.11.1.12 | Columndot11nAggrMpduMaxLen | read-write | current | 802.11n protocol Aggregate MPDU Max Length. |
| 1.3.6.1.4.1.4329.15.3.1.1.11.1.13 | Columndot11nAggrMsduSubFrames | read-write | current | 802.11n protocol Aggregate MPDU Max Number of Sub-frames. |
| 1.3.6.1.4.1.4329.15.3.1.1.11.1.14 | Columndot11nAddbaSupEnabled | read-write | current | 802.11n protocol ADDBA Support. |
| 1.3.6.1.4.1.4329.15.3.1.1.11.1.15 | Columndot11nConfigLDPC | read-write | current | Advanced error-detecting coding using Low Density Parity Check codes to increase the reliability of the transmission. |
| 1.3.6.1.4.1.4329.15.3.1.1.11.1.16 | Columndot11nConfigSTBC | read-write | current | A simple transmit diversity scheme using Space Time Block Coding to provide added robustness for devices where there are more transmit chains than receiver cha… |
| 1.3.6.1.4.1.4329.15.3.1.1.11.1.17 | Columndot11nConfigTXBF | read-write | current | An advanced transmit diversity scheme performing transmit beamforming to generate signals that can be optimally received to enhance the reliability and perform… |
| 1.3.6.1.4.1.4329.15.3.1.2 | Nodedot11ExtAPObjs | |||
| 1.3.6.1.4.1.4329.15.3.1.2.2 | Tabledot1XConfigTable | not-accessible | current | Conceptual table for 802.1X settings required for wireless security. |
| 1.3.6.1.4.1.4329.15.3.1.2.2.1 | Rowdot1XConfigEntry | not-accessible | current | An entry in dot1XConfigTable table. |
| 1.3.6.1.4.1.4329.15.3.1.2.2.1.1 | Columndot1XEnabled | read-write | current | Enable 802.1X authentication for this BSSID. |
| 1.3.6.1.4.1.4329.15.3.1.2.2.1.2 | Columndot1XDynamicRekeyingInterval | read-write | current | This object defines the time period, in seconds, after which the key value must be updated. |
| 1.3.6.1.4.1.4329.15.3.1.2.2.1.3 | Columndot1XWPA1Enabled | read-write | current | Enables WPA.1 (Wi-Fi Protected Access) on this BSSID |
| 1.3.6.1.4.1.4329.15.3.1.2.2.1.4 | Columndot1XWPAPassphrase | read-write | current | Specifies the WPA passphrase for the BSSID. This element is logically write only. Any attempt to read this element will result in null or 0. |
| 1.3.6.1.4.1.4329.15.3.1.2.2.1.5 | Columndot1XWPACipherType | read-write | current | Defines the encryption algoritms allowed with WPA: only TKIP if tkipOnly or both AES and TKIP if auto. This value has meaning if WPA.1 is enabled. |
| 1.3.6.1.4.1.4329.15.3.1.2.2.1.6 | Columndot1XWPA2Enabled | read-write | current | When true, WPA v.2 support is enabled. |
| 1.3.6.1.4.1.4329.15.3.1.2.2.1.7 | Columndot1XWPA2CipherType | read-write | current | Defines the encryption algoritms allowed with WPA2: only AES if aesOnly or both AES and TKIP if auto. This value has meaning if WPA.2 is enabled. |
| 1.3.6.1.4.1.4329.15.3.1.2.2.1.8 | Columndot1XConfigKeyManagement | read-write | current | Key caching method in use. This field has meaning when dot1XEnabled is true and WPAv2 is enabled. |
| 1.3.6.1.4.1.4329.15.3.1.4 | Nodedot11ExtCounters | |||
| 1.3.6.1.4.1.4329.15.3.1.4.1 | TableassocGroupTable | not-accessible | current | STA statistics table. |
| 1.3.6.1.4.1.4329.15.3.1.4.1.1 | RowassocGroupEntry | not-accessible | current | Entry in the STA statistics table. |
| 1.3.6.1.4.1.4329.15.3.1.4.1.1.1 | ColumnassocAddress | read-only | current | MAC address associated with the client. |
| 1.3.6.1.4.1.4329.15.3.1.4.1.1.2 | ColumnassocIfIndex | read-only | current | Index of the radio mode with which the client is associated. Values are: 11A =1, 11G =2 and 11B =3. Symbols notation: modeN50 = an = n5.0Ghz, modeN24 = bgn = n… |
| 1.3.6.1.4.1.4329.15.3.1.4.1.1.3 | ColumnassocReceivedRSSI | read-only | current | RSSI - Received Signal Strength Indicator. RSS[dBm] = RSSI[dB]-Noise Floor[dBm] measured in dBm, i.e actual Rx power. RSSI is a normalized indicator of RSS in … |
| 1.3.6.1.4.1.4329.15.3.1.4.1.1.4 | ColumnassocTransmittedRSSI | read-only | current | Received signal strength averaged for the ACK packets received in response to transmitted packets for this client. |
| 1.3.6.1.4.1.4329.15.3.1.4.1.1.5 | ColumnassocReceivedRate | read-only | current | PHY rate for the packets received from this client. |
| 1.3.6.1.4.1.4329.15.3.1.4.1.1.6 | ColumnassocTransmittedRate | read-only | current | PHY rate used to transmit packets for this client. |
| 1.3.6.1.4.1.4329.15.3.1.4.1.1.7 | ColumnassocReceivedFrameCount | read-only | current | Frames received from this client. |
| 1.3.6.1.4.1.4329.15.3.1.4.1.1.8 | ColumnassocTransmittedFrameCount | read-only | current | Frames transmitted for this client. |
| 1.3.6.1.4.1.4329.15.3.1.4.1.1.9 | ColumnassocReceiveErrors | read-only | current | Frames received with errors from this client. |
| 1.3.6.1.4.1.4329.15.3.1.4.1.1.10 | ColumnassocTransmitErrors | read-only | current | Frames transmitted with errors (not acknowledged) for this cleint. |
| 1.3.6.1.4.1.4329.15.3.1.4.1.1.11 | ColumnassocTransmitBytes | read-only | current | Bytes transmitted for this client. |
| 1.3.6.1.4.1.4329.15.3.1.4.1.1.12 | ColumnassocReceiveBytes | read-only | current | Bytes received from this client. |
| 1.3.6.1.4.1.4329.15.3.1.4.1.1.13 | ColumnassocReceivedRSS | read-only | current | RSS - Received Signal Strength. RSS[dBm] = RSSI[dB]-Noise Floor[dBm] measured in dBm, i.e actual Rx power. RSS is the actual signal strength measured at the re… |
| 1.3.6.1.4.1.4329.15.3.1.4.1.1.14 | ColumnassocDLLostRetriesPackets | read-only | current | Number of downlink (the transmission path is from Access Point to client) lost packets due to excessive retries for this client. |
| 1.3.6.1.4.1.4329.15.3.1.4.1.1.15 | ColumnassocDLLostRetriesBytes | read-only | current | Number of downlink (the transmission path is from Access Point to client) lost bytes due to excessive retries for this client. |
| 1.3.6.1.4.1.4329.15.3.1.4.2 | TableassocCountersTable | not-accessible | current | STA association statistics table. |
| 1.3.6.1.4.1.4329.15.3.1.4.2.1 | RowassocCountersEntry | not-accessible | current | Entry in the STA association statistics table. |
| 1.3.6.1.4.1.4329.15.3.1.4.2.1.1 | ColumnassocAuthenticationCount | read-only | current | Number of authentications for this client. |
| 1.3.6.1.4.1.4329.15.3.1.4.2.1.2 | ColumnassocDeauthenticationCount | read-only | current | Number of deauthentications for this client. |
| 1.3.6.1.4.1.4329.15.3.1.4.2.1.3 | ColumnassocAssociationCount | read-only | current | Number of associations for this client. |
| 1.3.6.1.4.1.4329.15.3.1.4.2.1.4 | ColumnassocDeassociationCount | read-only | current | Number of deassociations for this client. |
| 1.3.6.1.4.1.4329.15.3.1.4.2.1.5 | ColumnassocReassociationCount | read-only | current | Number of reassociations for this client. |
| 1.3.6.1.4.1.4329.15.3.1.4.3 | Tabledot11ExtRadioStatsTable | not-accessible | current | Table of statistics for the dot11 radio. |
| 1.3.6.1.4.1.4329.15.3.1.4.3.1 | Rowdot11ExtRadioStatsEntry | not-accessible | current | An entry in the dot11ExtRadioStatsEntry. |
| 1.3.6.1.4.1.4329.15.3.1.4.3.1.1 | Columndot11ExtRadioType | read-only | current | Indicates the type of radio (a/an or b/g/bgn). |
| 1.3.6.1.4.1.4329.15.3.1.4.3.1.2 | Columndot11ExtRadioInUcastPkts | read-only | current | Number of unicast packets from wireless-to-wired network at this radio. |
| 1.3.6.1.4.1.4329.15.3.1.4.3.1.3 | Columndot11ExtRadioInMcastPkts | read-only | current | Number of multicast packets from wireless-to-wired network at this radio. |
| 1.3.6.1.4.1.4329.15.3.1.4.3.1.4 | Columndot11ExtRadioInBcastPkts | read-only | current | Number of broadcast packets from wireless-to-wired network at this radio. |
| 1.3.6.1.4.1.4329.15.3.1.4.3.1.5 | Columndot11ExtRadioInOctets | read-only | current | Total bytes from wireless-to-wired network at this radio. |
| 1.3.6.1.4.1.4329.15.3.1.4.3.1.6 | Columndot11ExtRadioInErrors | read-only | current | Number of error packets from wireless-to-wired network at this radio. |
| 1.3.6.1.4.1.4329.15.3.1.4.3.1.7 | Columndot11ExtRadioInDiscardsPkts | read-only | current | Number of discarded packets from wireless-to-wired network at this radio. |
| 1.3.6.1.4.1.4329.15.3.1.4.3.1.8 | Columndot11ExtRadioOutUcastPkts | read-only | current | Number of unicast packets from wired-to-wireless network at this radio. |
| 1.3.6.1.4.1.4329.15.3.1.4.3.1.9 | Columndot11ExtRadioOutMcastPkts | read-only | current | Number of multicast packets from wired-to-wireless network at this radio. |
| 1.3.6.1.4.1.4329.15.3.1.4.3.1.10 | Columndot11ExtRadioOutBcastPkts | read-only | current | Number of broadcast from wired-to-wireless network at this radio. |
| 1.3.6.1.4.1.4329.15.3.1.4.3.1.11 | Columndot11ExtRadioOutOctets | read-only | current | Total bytes from wired-to-wireless network at this radio. |
| 1.3.6.1.4.1.4329.15.3.1.4.3.1.12 | Columndot11ExtRadioOutErrors | read-only | current | Number of error packets from wired-to-wireless network at this radio. |
| 1.3.6.1.4.1.4329.15.3.1.4.3.1.13 | Columndot11ExtRadioOutDiscardsPkts | read-only | current | Number of discarded packets from wired-to-wireless network at this radio. |
| 1.3.6.1.4.1.4329.15.3.1.4.3.1.14 | Columndot11ExtRadioWepIcvErrorCount | read-only | current | Number of WEP ICV Errors. |
| 1.3.6.1.4.1.4329.15.3.1.4.3.1.15 | Columndot11ExtRadioWepExcludedCount | read-only | current | Number of WEP excluded. |
| 1.3.6.1.4.1.4329.15.3.1.4.3.1.16 | Columndot11ExtRadioRetryCount | read-only | current | Number of retry frames. |
| 1.3.6.1.4.1.4329.15.3.1.4.3.1.17 | Columndot11ExtRadioMultipleRetryCount | read-only | current | Number of multiple retries frames. |
| 1.3.6.1.4.1.4329.15.3.1.4.3.1.18 | Columndot11ExtRadioRtsSuccessCount | read-only | current | Number of successful RTS frames. |
| 1.3.6.1.4.1.4329.15.3.1.4.3.1.19 | Columndot11ExtRadioRtsFailCount | read-only | current | Number of failed RTS frames. |
| 1.3.6.1.4.1.4329.15.3.1.4.3.1.20 | Columndot11ExtRadioAckFailCount | read-only | current | Number of failed ACK frames. |
| 1.3.6.1.4.1.4329.15.3.1.4.3.1.21 | Columndot11ExtRadioFrameDupCount | read-only | current | Number of duplicated frames. |
| 1.3.6.1.4.1.4329.15.3.1.4.3.1.22 | Columndot11ExtRadioTransFragCount | read-only | current | Number of transmitted fragment. |
| 1.3.6.1.4.1.4329.15.3.1.4.3.1.23 | Columndot11ExtRadioMulTransFrameCount | read-only | current | Number of transmitted multicast fragment. |
| 1.3.6.1.4.1.4329.15.3.1.4.3.1.24 | Columndot11ExtRadioFailedCount | read-only | current | Number of failed frames. |
| 1.3.6.1.4.1.4329.15.3.1.4.3.1.25 | Columndot11ExtRadioReceivedFragCount | read-only | current | Number of received fragment. |
| 1.3.6.1.4.1.4329.15.3.1.4.3.1.26 | Columndot11ExtRadioMulRecFrameCount | read-only | current | Number of received multicast frame. |
| 1.3.6.1.4.1.4329.15.3.1.4.3.1.27 | Columndot11ExtRadioFcsErrorCount | read-only | current | Number of FCS errors frames. |
| 1.3.6.1.4.1.4329.15.3.1.4.3.1.28 | Columndot11ExtRadioWepUndecrypCount | read-only | current | Number of undecryptable WEP frames. |
| 1.3.6.1.4.1.4329.15.3.1.4.3.1.29 | Columndot11ExtRadioTransFrameCount | read-only | current | Number of transmitted frames. |
| 1.3.6.1.4.1.4329.15.3.1.4.3.1.30 | Columndot11ExtRadioDeauthCacCount | read-only | current | Number of deauthentications due to CAC. |
| 1.3.6.1.4.1.4329.15.3.1.4.3.1.31 | Columndot11ExtRadioAvgNfCount | read-only | current | Noise floor measured by the AP on the 802.11 channel. Noise floor is measured during the quiet time, between the valid transmission or reception of 802.11 fram… |
| 1.3.6.1.4.1.4329.15.3.1.4.3.1.32 | Columndot11ExtRadioMaxNfCount | read-only | current | Maximum noise floor measured by the AP on the 802.11 channel. Noise floor is measured during the quiet time, between the valid transmission or reception of 802… |
| 1.3.6.1.4.1.4329.15.3.1.4.3.1.33 | Columndot11ExtRadioAvgChlOccCount | read-only | current | Average DCS Channel Utilization by Adjacent APs [%]. |
| 1.3.6.1.4.1.4329.15.3.1.4.3.1.34 | Columndot11ExtRadioMaxChlOccCount | read-only | current | Maximum DCS Channel Utilization by Adjacent APs [%]. |
| 1.3.6.1.4.1.4329.15.3.1.4.3.1.35 | Columndot11ExtRadioAvgTxOccCount | read-only | current | TxOccupancy variable reports the time (in %) AP was transmitting during the last 100 seconds. During AP transmission all other STA/AP's has only receive access… |
| 1.3.6.1.4.1.4329.15.3.1.4.3.1.36 | Columndot11ExtRadioMaxTxOccCount | read-only | current | TxOccupancy variable reports the maximum time (in %) AP was transmitting during the last 100 seconds. During AP transmission all other STA/AP's has only receiv… |
| 1.3.6.1.4.1.4329.15.3.1.4.3.1.37 | Columndot11ExtRadioAvgRxOccCount | read-only | current | Average DCS RX Channel Utilization [%]. |
| 1.3.6.1.4.1.4329.15.3.1.4.3.1.38 | Columndot11ExtRadioMaxRxOccCount | read-only | current | Maximum DCS RX Channel Utilization [%]. |
| 1.3.6.1.4.1.4329.15.3.1.4.3.1.39 | Columndot11ExtRadioAvgBusyChPercentage | read-only | current | STA/AP performs clear channel assessment before transmitting on the 802.11 wireless channel. BusyChannel variable reports the time (in % ) that channel was bus… |
| 1.3.6.1.4.1.4329.15.3.1.4.3.1.40 | Columndot11ExtRadioMaxBusyChPercentage | read-only | current | STA/AP performs clear channel assessment before transmitting on the 802.11 wireless channel. BusyChannel variable reports the maximum time (in % ) that channel… |
| 1.3.6.1.4.1.4329.15.3.1.4.3.1.41 | Columndot11ExtRadioAvgRxChOccPercentage | read-only | current | RxOccupancy variable reports the time (in %) AP received valid 802.11 frames on the radio receiver during the last 100 seconds. Variable counts all 802.11 fram… |
| 1.3.6.1.4.1.4329.15.3.1.4.3.1.42 | Columndot11ExtRadioMaxRxChOccPercentage | read-only | current | RxOccupancy variable reports the maximum time (in %) AP received valid 802.11 frames on the radio receiver during the last 100 seconds. Variable counts all the… |
| 1.3.6.1.4.1.4329.15.3.1.5 | Nodedot11ExtConformance | |||
| 1.3.6.1.4.1.4329.15.3.1.5.1 | CompliancehiPathWirelessDot11ExtModule | current | HIPATH-WIRELESS-DOT11-EXTNS module compliance. | |
| 1.3.6.1.4.1.4329.15.3.1.5.2 | GrouphiPathWirelessDot11ExtGroups | current | High Path Wireless DOT11-EXTNS object-group. | |
| 1.3.6.1.4.1.4329.15.3.1.5.3 | GrouphiPathWirelessDot11ObsoleteGroups | obsolete | Objects in this list are obsolete. | |
| 1.3.6.1.4.1.4329.15.3.1.5.4 | Nodedot11EWCGroups | |||
| 1.3.6.1.4.1.4329.15.3.1.5.4.1 | Groupdot11nConfigGroup | current | Objects in this group contain attributes of dot11n radio. | |
| 1.3.6.1.4.1.4329.15.3.1.5.4.2 | GroupassocGroupGroup | current | Objects in this group contain information about associated MUs. | |
| 1.3.6.1.4.1.4329.15.3.1.5.4.3 | GroupassocCountersGroup | current | Objects in this group contain stats related to associated MUs. | |
| 1.3.6.1.4.1.4329.15.3.1.5.4.4 | Groupdot11ExtRadioStatsGroup | current | Objects in this group contain statistics related a radio. | |
| 1.3.6.1.4.1.4329.15.5.3 | IdentityhiPathWirelessDot11ExtnsMIB | This module provides extension objects to the ieee80211 MIB. |