MIB Viewer

HIPATH-WIRELESS-HWC-MIB

1169 objects
The access controller MIB
Imported Objects
HIPATH-WIRELESS-SMIhiPathWirelessMgmt hiPathWirelessModules
IEEE802dot11-MIBWEPKeytype
IF-MIBifIndex InterfaceIndex
IPV6-TCIpv6Address
SNMPv2-CONFMODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP
SNMPv2-SMICounter32 Counter64 Gauge32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks Unsigned32
SNMPv2-TCDisplayString MacAddress RowStatus TEXTUAL-CONVENTION TruthValue
OIDNameAccessStatusDescription
1.3.6.1.4.1.4329.15.3.2NodehiPathWirelessController
1.3.6.1.4.1.4329.15.3.2.1NodesystemObjects
1.3.6.1.4.1.4329.15.3.2.1.1ScalarsysSoftwareVersionread-onlycurrentSystem software version.
1.3.6.1.4.1.4329.15.3.2.1.2ScalarsysLogLevelread-writecurrentSets the level of events which are written to the system log.
1.3.6.1.4.1.4329.15.3.2.1.3ScalarsysSerialNoread-onlycurrentSystem serial number.
1.3.6.1.4.1.4329.15.3.2.1.4NodesysLogSupport
1.3.6.1.4.1.4329.15.3.2.1.4.1ScalarhiPathWirelessAppLogFacilityread-writecurrentThe application log facility level for syslog.
1.3.6.1.4.1.4329.15.3.2.1.4.2ScalarserviceLogFacilityread-writecurrentThe service log facility level for syslog.
1.3.6.1.4.1.4329.15.3.2.1.4.3ScalarincludeAllServiceMessagesread-writecurrentIndicates if DHCP messages should also be forwarded to syslog.
1.3.6.1.4.1.4329.15.3.2.1.4.4TablesysLogServersTablenot-accessiblecurrentTable of syslog servers to forward logging messages.
1.3.6.1.4.1.4329.15.3.2.1.4.4.1RowsysLogServersEntrynot-accessiblecurrentConfiguration information for an external syslog server.
1.3.6.1.4.1.4329.15.3.2.1.4.4.1.1ColumnsysLogServerIndexread-writecurrentTable index for the syslog server.
1.3.6.1.4.1.4329.15.3.2.1.4.4.1.2ColumnsysLogServerEnabledread-writecurrentIndicates if messages are to be sent to the syslog server.
1.3.6.1.4.1.4329.15.3.2.1.4.4.1.3ColumnsysLogServerIPread-writecurrentsyslog server IP address.
1.3.6.1.4.1.4329.15.3.2.1.4.4.1.4ColumnsysLogServerPortread-writecurrentsyslog server port number.
1.3.6.1.4.1.4329.15.3.2.1.4.4.1.5ColumnsysLogServerRowStatusread-writecurrentRowStatus for operating on syslogServersTable.
1.3.6.1.4.1.4329.15.3.2.1.5ScalarsysCPUTyperead-onlycurrentWireless controller's CPU type
1.3.6.1.4.1.4329.15.3.2.1.6NodeapLogManagement
1.3.6.1.4.1.4329.15.3.2.1.6.1ScalarapLogCollectionEnableread-writecurrentIf this field is set to true, then the AP log collection feature is enabled.
1.3.6.1.4.1.4329.15.3.2.1.6.2ScalarapLogFrequencyread-writecurrentNumber of log collections performed daily. The number must be one of the following 1, 2, 4, 6.
1.3.6.1.4.1.4329.15.3.2.1.6.3ScalarapLogDestinationread-writecurrentDestination where the log file will be stored. If the local flash is not mounted, then you can not select 1. 0 : local memory. 1 : flash. 2 : remote location.
1.3.6.1.4.1.4329.15.3.2.1.6.4ScalarapLogFTProtocolread-writecurrentFile transfer protocol. This field has meaning only when apLogDestination is set to remote(2). 0 : ftp. 1 : scp.
1.3.6.1.4.1.4329.15.3.2.1.6.5ScalarapLogServerIPread-writecurrentThe IP address of the remote server. This field has meaning only when apLogDestination is set to remote(2).
1.3.6.1.4.1.4329.15.3.2.1.6.6ScalarapLogUserIdread-writecurrentThe user ID that is used for access to the remote server. This field has meaning only when apLogDestination is set to remote(2).
1.3.6.1.4.1.4329.15.3.2.1.6.7ScalarapLogPasswordread-writecurrentThe user password that is used for access to the remote server. This field has meaning only when apLogDestination is set to remote(2). This field can only be v…
1.3.6.1.4.1.4329.15.3.2.1.6.8ScalarapLogDirectoryread-writecurrentThe directory of the remote server. This field has meaning only when apLogDestination is set to remote(2).
1.3.6.1.4.1.4329.15.3.2.1.6.9TableapLogSelectedAPsTablenot-accessiblecurrentTable containing a list of APs for which log collection is supported.
1.3.6.1.4.1.4329.15.3.2.1.6.9.1RowapLogSelectedAPsEntrynot-accessiblecurrentConfiguration information of an AP which supports the AP log feature.
1.3.6.1.4.1.4329.15.3.2.1.6.9.1.1ColumnapSerialNonot-accessiblecurrentTable index for the apLogSelectedAPs. The AP's serial number serves as the index.
1.3.6.1.4.1.4329.15.3.2.1.6.9.1.2Columnselectread-writecurrentIndicates whether logs are collected from the AP.
1.3.6.1.4.1.4329.15.3.2.1.6.10ScalarapLogQuickSelectedOptionread-writecurrentThis is a quick select option for the user to perform the AP's bulk selection. This field is write-only and read access returns unknown(0) value. 0 : unknown. …
1.3.6.1.4.1.4329.15.3.2.1.7NodeapLogFileUtility
1.3.6.1.4.1.4329.15.3.2.1.7.1ScalarapLogFileUtilityLimitread-onlycurrentThe maximum number of AP log file copy requests that can be held in the apLogFileCopyTable. A value of 0 indicates no configured limit.
1.3.6.1.4.1.4329.15.3.2.1.7.2ScalarapLogFileUtilityCurrentread-onlycurrentThe number of AP log file copy requests currently in the apLogFileCopyTable.
1.3.6.1.4.1.4329.15.3.2.1.7.5TableapLogFileCopyTablenot-accessiblecurrentList of AP log file copy requests.
1.3.6.1.4.1.4329.15.3.2.1.7.5.1RowapLogFileCopyEntrynot-accessiblecurrentAn entry describing the AP log file copy request.
1.3.6.1.4.1.4329.15.3.2.1.7.5.1.1ColumnapLogFileCopyIndexnot-accessiblecurrentThe index for this AP log file copy request.
1.3.6.1.4.1.4329.15.3.2.1.7.5.1.2ColumnapLogFileCopyDestinationread-writecurrentDestination where the log file will be copied. If the local flash is not mounted, then you can not select 1. 1 : copy the local AP log file to flash. 2 : copy …
1.3.6.1.4.1.4329.15.3.2.1.7.5.1.3ColumnapLogFileCopyProtocolread-writecurrentFile transfer protocol to be used to copy the log file. 0 : ftp. 1 : scp.
1.3.6.1.4.1.4329.15.3.2.1.7.5.1.4ColumnapLogFileCopyServerIPread-writecurrentThe IP address of the remote server.
1.3.6.1.4.1.4329.15.3.2.1.7.5.1.5ColumnapLogFileCopyUserIDread-writecurrentThe user ID that is used for access to the remote server.
1.3.6.1.4.1.4329.15.3.2.1.7.5.1.6ColumnapLogFileCopyPasswordread-writecurrentThe user password that is used for access to the remote server. This field can only be viewed in SNMPv3 mode with privacy.
1.3.6.1.4.1.4329.15.3.2.1.7.5.1.7ColumnapLogFileCopyServerDirectoryread-writecurrentThe directory on the remote server.
1.3.6.1.4.1.4329.15.3.2.1.7.5.1.8ColumnapLogFileCopyOperationread-createcurrentIf this field is set to 1, then the controller will start to perform the copy action.
1.3.6.1.4.1.4329.15.3.2.1.7.5.1.9ColumnapLogFileCopyOperationStatusread-onlycurrentThe operational state of the AP log file copy request. inactive - Indicates that the RowStatus of this conceptual row is not in the `active` state. pending - I…
1.3.6.1.4.1.4329.15.3.2.1.7.5.1.10ColumnapLogFileCopyRowStatusread-createcurrentRow status variable for row operations on the apLogFileCopyTable.
1.3.6.1.4.1.4329.15.3.2.2NodednsObjects
1.3.6.1.4.1.4329.15.3.2.2.1ScalarprimaryDNSread-writecurrentPrimary DNS address configured in the Controller.
1.3.6.1.4.1.4329.15.3.2.2.2ScalarsecondaryDNSread-writecurrentSecondary DNS address configured in the Controller.
1.3.6.1.4.1.4329.15.3.2.2.3ScalartertiaryDNSread-writecurrentThird DNS address configured in the Controller.
1.3.6.1.4.1.4329.15.3.2.3NodemgmtPortObjects
1.3.6.1.4.1.4329.15.3.2.3.1ScalarmgmtPortIfIndexread-onlycurrentifIndex of the management port.
1.3.6.1.4.1.4329.15.3.2.3.2ScalarmgmtPortHostnameread-writecurrentHostname of the management port.
1.3.6.1.4.1.4329.15.3.2.3.5ScalarmgmtPortDomainread-writecurrentDomain of the management port.
1.3.6.1.4.1.4329.15.3.2.4NodephysicalPortObjects
1.3.6.1.4.1.4329.15.3.2.4.1ScalarphysicalPortCountread-onlycurrentNumber of rows in routerPortsTable.
1.3.6.1.4.1.4329.15.3.2.4.2TablephysicalPortsTablenot-accessibledeprecatedTable of router ports on the controller.
1.3.6.1.4.1.4329.15.3.2.4.2.1RowphysicalPortsEntrynot-accessibledeprecatedAn entry in routerPortsTable.
1.3.6.1.4.1.4329.15.3.2.4.2.1.1ColumnportMgmtTrafficEnableread-writedeprecatedDetermines whether controller management network traffic is allowed over this interface.
1.3.6.1.4.1.4329.15.3.2.4.2.1.2ColumnportDuplexModeread-writedeprecatedDuplex mode for the esa ports.
1.3.6.1.4.1.4329.15.3.2.4.2.1.3ColumnportFunctionread-writedeprecatedSpecifies the behavior of the EWC physical ports.
1.3.6.1.4.1.4329.15.3.2.4.2.1.4ColumnportEnabledread-writedeprecatedIf enabled, the interface administratively is enabled.
1.3.6.1.4.1.4329.15.3.2.4.2.1.5ColumnportNameread-onlydeprecatedA textual string containing information about the port.
1.3.6.1.4.1.4329.15.3.2.4.2.1.6ColumnportIpAddressread-writedeprecatedThe IP address of this port.
1.3.6.1.4.1.4329.15.3.2.4.2.1.7ColumnportMaskread-writedeprecatedThe subnet mask associated with the IP address of this port.
1.3.6.1.4.1.4329.15.3.2.4.2.1.8ColumnportMacAddressread-onlydeprecatedPort's MAC address.
1.3.6.1.4.1.4329.15.3.2.4.2.1.9ColumnportVlanIDread-writedeprecatedExternal VLAN tag for the physical port for trasmitted and received packets. Value ranges: (-1) it is not tagged, zero(0) means reserved, 1-4094 tag value.
1.3.6.1.4.1.4329.15.3.2.4.2.1.10ColumnportDHCPEnableread-writedeprecatedIf enabled, the controller is configured as default DHCP server for AP.
1.3.6.1.4.1.4329.15.3.2.4.2.1.11ColumnportDHCPGatewayread-writedeprecatedGateway address to be supplied to the wireless clients if controller is configured as default DHCP server for AP.
1.3.6.1.4.1.4329.15.3.2.4.2.1.12ColumnportDHCPDomainread-writedeprecatedDomain name to be supplied to the wireless clients if controller is configured as default DHCP server for AP.
1.3.6.1.4.1.4329.15.3.2.4.2.1.13ColumnportDHCPDefaultLeaseread-writedeprecatedDefault DHCP lease time in seconds to be supplied to the wireless clients if controller is configured as default DHCP server for AP.
1.3.6.1.4.1.4329.15.3.2.4.2.1.14ColumnportDHCPMaxLeaseread-writedeprecatedMaximum DHCP lease time in seconds to be supplied to the wireless clients if controller is configured as default DHCP server for AP.
1.3.6.1.4.1.4329.15.3.2.4.2.1.15ColumnportDHCPDnsServersread-writedeprecatedList of DNSs to be supplied to the wireless clients if controller is configured as default DHCP server for AP.
1.3.6.1.4.1.4329.15.3.2.4.2.1.16ColumnportDHCPWinsread-writedeprecatedList of WINSs to be supplied to the wireless clients if controller is configured as default DHCP server for AP.
1.3.6.1.4.1.4329.15.3.2.4.3ScalarphysicalPortsInternalVlanIDread-writecurrentInternal VLAN tag to be used for physical ports for which the exernal VLAN tag have not been configured. Value ranges: (-1) it is not tagged, zero(0) means res…
1.3.6.1.4.1.4329.15.3.2.4.4ScalarphysicalFlashread-onlycurrentFlash drive status.
1.3.6.1.4.1.4329.15.3.2.4.5TablephyDHCPRangeTablenot-accessibledeprecatedphyDHCPRangeTable contains the IP address ranges that DHCP will serve to clients associated with physical ports.
1.3.6.1.4.1.4329.15.3.2.4.5.1RowphyDHCPRangeEntrynot-accessibledeprecatedConfiguration information for a DHCP range.
1.3.6.1.4.1.4329.15.3.2.4.5.1.1ColumnphyDHCPRangeIndexread-writedeprecatedIndex for the DHCP row element.
1.3.6.1.4.1.4329.15.3.2.4.5.1.2ColumnphyDHCPRangeStartread-writedeprecatedFirst IP address in the range.
1.3.6.1.4.1.4329.15.3.2.4.5.1.3ColumnphyDHCPRangeEndread-writedeprecatedLast IP address in the range.
1.3.6.1.4.1.4329.15.3.2.4.5.1.4ColumnphyDHCPRangeTyperead-writedeprecatedDetermines whether addresses in the specified range will be included, or excluded by the DHCP server.
1.3.6.1.4.1.4329.15.3.2.4.5.1.5ColumnphyDHCPRangeStatusread-writedeprecatedRow status variable for row operations on the phyDHCPRangeTable
1.3.6.1.4.1.4329.15.3.2.4.6TablelayerTwoPortTablenot-accessiblecurrentThis table contains all layer two ports.
1.3.6.1.4.1.4329.15.3.2.4.6.1RowlayerTwoPortEntrynot-accessiblecurrentEntry for a layer two port.
1.3.6.1.4.1.4329.15.3.2.4.6.1.1ColumnlayerTwoPortNameread-onlycurrentText string identifying the port within the controller.
1.3.6.1.4.1.4329.15.3.2.4.6.1.2ColumnlayerTwoPortMgmtStateread-writecurrentThis value indicates administrator state of the port.
1.3.6.1.4.1.4329.15.3.2.4.6.1.3ColumnlayerTwoPortMacAddressread-onlycurrentPort's MAC address.
1.3.6.1.4.1.4329.15.3.2.4.7ScalarjumboFramesread-writecurrentEnables support for frames up to 1800 bytes long. jumboFrames support only applies to the controller and compatible APs.
1.3.6.1.4.1.4329.15.3.2.5NodevnManagerObjects
1.3.6.1.4.1.4329.15.3.2.5.1ScalarvnRoleread-writecurrentSpecifies the role of this EWC in inter-EWC mobility. None indicates that mobile units cannot roam to or from this EWC. In any EWC cluster, only one EWC should…
1.3.6.1.4.1.4329.15.3.2.5.2ScalarvnIfIndexread-writecurrentifIndex of the physical port where inter-EWC tunnels terminate. This field has meaning if vnRole is not none(1)
1.3.6.1.4.1.4329.15.3.2.5.3ScalarvnHeartbeatIntervalread-writecurrentThe time interval between inter-EWC polling messages. This field has meaning if vnRole is not none(1)
1.3.6.1.4.1.4329.15.3.2.5.4ScalarvnLocalClientsread-onlycurrentNumber of locally associated clients to this controller that is considered to be their home controller in the mobility zone, which this controller is part of.
1.3.6.1.4.1.4329.15.3.2.5.5ScalarvnForeignClientsread-onlycurrentNumber of clients that have registered with another controller in the mobility zone, which this controller is part of, and currently have roamed to this contro…
1.3.6.1.4.1.4329.15.3.2.5.6ScalarvnTotalClientsread-onlycurrentNumber of local and foreign clients on this controller in the Mobility zone.
1.3.6.1.4.1.4329.15.3.2.6NodentpObjects
1.3.6.1.4.1.4329.15.3.2.6.1ScalarntpEnabledread-writecurrentEnable or disables support for the Network Time Protocol (NTP).
1.3.6.1.4.1.4329.15.3.2.6.2ScalarntpTimezoneread-writecurrentSpecifies the time zone where this EWC resides.
1.3.6.1.4.1.4329.15.3.2.6.3ScalarntpTimeServer1read-writecurrentPrimary NTP server.
1.3.6.1.4.1.4329.15.3.2.6.4ScalarntpTimeServer2read-writecurrentSecondary NTP server.
1.3.6.1.4.1.4329.15.3.2.6.5ScalarntpTimeServer3read-writecurrentTertiary NTP server.
1.3.6.1.4.1.4329.15.3.2.6.6ScalarntpServerEnabledread-writecurrentEnable or disables support for controller as NTP server.
1.3.6.1.4.1.4329.15.3.2.7NodecontrollerStats
1.3.6.1.4.1.4329.15.3.2.7.1ScalartunnelsTxRxBytesread-onlycurrentSum of transmitted and received bytes over all existing tunnels.
1.3.6.1.4.1.4329.15.3.2.7.6ScalartunnelCountread-onlycurrentNumber of connections to other WirelessController controllers.
1.3.6.1.4.1.4329.15.3.2.7.7TabletunnelStatsTablenot-accessiblecurrenttunnelStatsTable contains a list of the IP tunnels connected to this EWC for use in inter-EWC mobility.
1.3.6.1.4.1.4329.15.3.2.7.7.1RowtunnelStatsEntrynot-accessiblecurrentStatistics for a mobility tunnel.
1.3.6.1.4.1.4329.15.3.2.7.7.1.1ColumntunnelStartIPread-writecurrentIP address for the start of the tunnel.
1.3.6.1.4.1.4329.15.3.2.7.7.1.2ColumntunnelStartHWCread-writecurrentName of the access controller for the start of the tunnel.
1.3.6.1.4.1.4329.15.3.2.7.7.1.3ColumntunnelEndIPread-writecurrentIP address for the end of the tunnel.
1.3.6.1.4.1.4329.15.3.2.7.7.1.4ColumntunnelEndHWCread-writecurrentName of the access controller for the end of the tunnel.
1.3.6.1.4.1.4329.15.3.2.7.7.1.5ColumntunnelStatusread-writecurrentIndicates if the mobility tunnel is up or down.
1.3.6.1.4.1.4329.15.3.2.7.7.1.6ColumntunnelStatsTxBytesread-onlycurrentNumber of bytes have been transmitted from the controller at the start of the tunnel to the controller on the other end of the tunnel.
1.3.6.1.4.1.4329.15.3.2.7.7.1.7ColumntunnelStatsRxBytesread-onlycurrentNumber of bytes have been received by the controller at the end of the tunnel from the controller at the start of the tunnel.
1.3.6.1.4.1.4329.15.3.2.7.7.1.8ColumntunnelStatsTxRxBytesread-onlycurrentSum of transmitted and received bytes over this tunnel.
1.3.6.1.4.1.4329.15.3.2.7.8ScalarclearAccessRejectMsgread-writecurrentSet this OID to one to erase the contents of the accessRejectMessage table. The OID always returns 0 when read.
1.3.6.1.4.1.4329.15.3.2.7.9TableaccessRejectMsgTablenot-accessiblecurrentThis table lists each of the reply messages returned in RADIUS Access-Reject messages and for each reply message, a count of the number of times it has been re…
1.3.6.1.4.1.4329.15.3.2.7.9.1RowaccessRejectMsgEntrynot-accessiblecurrentOne entry consisting of a unique Access-Reject Reply-Message (accessRejectReplyMessage) and count of this message.
1.3.6.1.4.1.4329.15.3.2.7.9.1.1ColumnarmIndexnot-accessiblecurrentA number uniquely identifying each conceptual row in the accessRejectMsgTable.
1.3.6.1.4.1.4329.15.3.2.7.9.1.2ColumnarmCountread-onlycurrentCount of the number of times the controller has received an Access-Reject response from a RADIUS server that contained the associated armReplyMessage.
1.3.6.1.4.1.4329.15.3.2.7.9.1.3ColumnarmReplyMessageread-onlycurrentA reply message attribute received by the controller from a RADIUS server in an Access-Reject message.
1.3.6.1.4.1.4329.15.3.2.8Nodeavailability
1.3.6.1.4.1.4329.15.3.2.8.1ScalaravailabilityStatusread-writecurrentThis field can be used to enable or disable availability. If it is set to paired(1), then availability is enabled on this controller, otherwise it is considere…
1.3.6.1.4.1.4329.15.3.2.8.2ScalarpairIPAddressread-writecurrentIP address of paired controller in availability pairing mode.
1.3.6.1.4.1.4329.15.3.2.8.3ScalarhwcAvailabilityRankread-writecurrentRank of controller in Availability pairing mode. This is legacy field and applies to releases before 5.x and in current releases it is used for reporting only.
1.3.6.1.4.1.4329.15.3.2.8.4ScalarfastFailoverread-writecurrentEnables or disables fast failover when controller operates in Availability pairing mode.
1.3.6.1.4.1.4329.15.3.2.8.5ScalardetectLinkFailureread-writecurrentTime to detect link failure between two controllers in availability pairing. The value can be set to values between 2-30 seconds
1.3.6.1.4.1.4329.15.3.2.8.6ScalarsynchronizeSystemConfigread-writecurrentIf this flag is set to enabled then system configuration is synchronized between paired controllers operating in Availabilty pairing mode.
1.3.6.1.4.1.4329.15.3.2.8.7ScalarsynchronizeGuestPortread-writecurrentIf this flag is set to enabled then Guest Portal user accounts are synchronized between paired controllers operating in Availabilty pairing mode.
1.3.6.1.4.1.4329.15.3.2.9NodesecureConnection
1.3.6.1.4.1.4329.15.3.2.9.1ScalarweakCipherEnableread-writecurrentBy default usage of weak cipher is enabled on EWC. Weak cipher can be disabled using this field.
1.3.6.1.4.1.4329.15.3.2.10Nodedashboard
1.3.6.1.4.1.4329.15.3.2.10.1NodelicensingInformation
1.3.6.1.4.1.4329.15.3.2.10.1.1ScalarlicenseRegulatoryDomainread-onlycurrentRegulatory domain that this wireless controller system has been licensed for to operate.
1.3.6.1.4.1.4329.15.3.2.10.1.2ScalarlicenseTyperead-onlycurrentType of license for the controller. Temporary lincese allows controller to operate within defined number of days after which a permanent license is required fo…
1.3.6.1.4.1.4329.15.3.2.10.1.3ScalarlicenseDaysRemainingread-onlycurrentNumber of days is left for the temporary license to expire. This value has meaning if the license type is temporary(1).
1.3.6.1.4.1.4329.15.3.2.10.1.4ScalarlicenseAvailableAPread-onlycurrentIf licenseMode is standAlone, this is the maximum number of APs that can be active on the controller without violating the licensing agreement. If licenseMode …
1.3.6.1.4.1.4329.15.3.2.10.1.5ScalarlicenseInServiceRadarAPread-onlycurrentIf licenseMode is standalone this is the maximum number of APs that can be active on this controller and can operate as Guardians or in-service Radar APs witho…
1.3.6.1.4.1.4329.15.3.2.10.1.6ScalarlicenseModeread-onlycurrentLicense mode determines how to interpret the license capacity OIDs. licenseMode is standalone if the controller is not part of an availability pair. licenseMod…
1.3.6.1.4.1.4329.15.3.2.10.1.7ScalarlicenseLocalAPread-onlycurrentThe total number of AP capacity licenses installed on this controller.
1.3.6.1.4.1.4329.15.3.2.10.1.8ScalarlicenseForeignAPread-onlycurrentThe total number of AP capacity licenses installed on this controller's availability partner.
1.3.6.1.4.1.4329.15.3.2.10.1.9ScalarlicenseLocalRadarAPread-onlycurrentThe total number of AP Radar capacity licenses installed on this controller.
1.3.6.1.4.1.4329.15.3.2.10.1.10ScalarlicenseForeignRadarAPread-onlycurrentThe total number of AP Radar capacity licenses installed on this controller's availability partner.
1.3.6.1.4.1.4329.15.3.2.10.2NodestationsByProtocol
1.3.6.1.4.1.4329.15.3.2.10.2.1ScalarstationsByProtocolAread-onlycurrentNumber of stations using 802.11a mode to access the network.
1.3.6.1.4.1.4329.15.3.2.10.2.2ScalarstationsByProtocolBread-onlycurrentNumber of stations using 802.11b mode to access the network.
1.3.6.1.4.1.4329.15.3.2.10.2.3ScalarstationsByProtocolGread-onlycurrentNumber of stations using 802.11b mode to access the network.
1.3.6.1.4.1.4329.15.3.2.10.2.4ScalarstationsByProtocolN24read-onlycurrentNumber of stations using 802.11n mode with frequency of 2.4Gig to access the network.
1.3.6.1.4.1.4329.15.3.2.10.2.5ScalarstationsByProtocolN5read-onlycurrentNumber of stations using 802.11n mode with frequency of 5Gig to access the network.
1.3.6.1.4.1.4329.15.3.2.10.2.6ScalarstationsByProtocolUnavailableread-onlycurrentThe total number of stations with sessions on this controller for which the 802.11 protocol type (a, b, g, n, ac) for which the protocol could not be determine…
1.3.6.1.4.1.4329.15.3.2.10.2.7ScalarstationsByProtocolErrorread-onlycurrentThe total number of stations with sessions on this controller for which an AP reported an invalid (out of range) value as the station's 802.11 protocol type.
1.3.6.1.4.1.4329.15.3.2.10.2.8ScalarstationsByProtocolACread-onlycurrentNumber of stations using 802.11ac mode to access the network.
1.3.6.1.4.1.4329.15.3.2.10.3TableapByChannelTablenot-accessiblecurrentList of aggregated access points that are operating on a specific wireless channels.
1.3.6.1.4.1.4329.15.3.2.10.3.1RowapByChannelEntrynot-accessiblecurrentAn entry in this table for one wireless channel and aggregated access point on that channel.
1.3.6.1.4.1.4329.15.3.2.10.3.1.1ColumnapByChannelNumbernot-accessiblecurrentThe channel on which a set of access points are presently operating. If this number is 0, this means the AP is in Guardian mode or the AP's radios are turned o…
1.3.6.1.4.1.4329.15.3.2.10.3.1.2ColumnapByChannelAPsread-onlycurrentTotal number of the access point on the channel that this row is indexed on.
1.3.6.1.4.1.4329.15.3.3NodevirtualNetworks
1.3.6.1.4.1.4329.15.3.3.1NodevnsConfigObjects
1.3.6.1.4.1.4329.15.3.3.1.1ScalarvnsCountread-onlycurrentNumber of VNSes defined in vnsConfigTable.
1.3.6.1.4.1.4329.15.3.3.1.2TablevnsConfigTablenot-accessiblecurrentContains definitions of the Virtual Network Segments defined on this WirelessController.
1.3.6.1.4.1.4329.15.3.3.1.2.1RowvnsConfigEntrynot-accessiblecurrentConfiguration elements for a specific Virtual Network Segment.
1.3.6.1.4.1.4329.15.3.3.1.2.1.1ColumnvnsDescriptionread-writecurrentTextual description of the VNS.
1.3.6.1.4.1.4329.15.3.3.1.2.1.2ColumnvnsAssignmentModeread-writeobsoleteDetermines the method by which mobile units are assigned an address within this VNS. If vnsAssignmentMode = ssid, any client with an SSID matching the VNS will…
1.3.6.1.4.1.4329.15.3.3.1.2.1.3ColumnvnsMUSessionTimeoutread-writecurrentClient session idle time out, in seconds.
1.3.6.1.4.1.4329.15.3.3.1.2.1.4ColumnvnsAllowMulticastread-writecurrentWhen true, allows IP multicast packets to be broadcast to the clients on this VNS.
1.3.6.1.4.1.4329.15.3.3.1.2.1.5ColumnvnsSSIDread-writecurrentService Set Identifier (i.e. Network Name) that will be configured on the AccessPoints associated with this VNS.
1.3.6.1.4.1.4329.15.3.3.1.2.1.6ColumnvnsDomainread-writecurrentDomain name to be supplied to the wireless clients if internal DHCP address assignment.
1.3.6.1.4.1.4329.15.3.3.1.2.1.7ColumnvnsDNSServersread-writecurrentList of DNSs to be supplied to the wireless clients if internal DHCP address assignment.
1.3.6.1.4.1.4329.15.3.3.1.2.1.8ColumnvnsWINSServersread-writecurrentList of WINSs to be supplied to the wireless clients if internal DHCP address assignment.
1.3.6.1.4.1.4329.15.3.3.1.2.1.9ColumnvnsAuthModelread-writecurrentvnsAuthModel specifies the authentication method used for clients in the VNS. None indicates that the VNS is open, and no authentication is required. vnsAuthMo…
1.3.6.1.4.1.4329.15.3.3.1.2.1.10ColumnvnsParentIfIndexread-writeobsoleteSpecifies the ifIndex of the parent VNS, if this VNS is a child. If this is a top level VNS, vnsParentIfIndex will return null or 0.
1.3.6.1.4.1.4329.15.3.3.1.2.1.11ColumnvnsMgmtTrafficEnableread-writecurrentSpecifies whether clients in the VNS have access to EWC management elements.
1.3.6.1.4.1.4329.15.3.3.1.2.1.12ColumnvnsUseDHCPRelayread-writecurrentThis variable indicates what type of DHCP is used for the VNS. none(0): No DHCP server on the VNS. dhcpRelay(1): Uses DHCP relay to reach the DHCP server. loca…
1.3.6.1.4.1.4329.15.3.3.1.2.1.13Columnvns3rdPartyAPread-writecurrentWhen true, specifies that the VNS contains 3rd party access points. Only one such VNS may be defined for a WirelessController.
1.3.6.1.4.1.4329.15.3.3.1.2.1.14ColumnvnsStatusread-writecurrentRowStatus variable for performing row operations on vnsConfigTable.
1.3.6.1.4.1.4329.15.3.3.1.2.1.15ColumnvnsModeread-writecurrentType of traffic for this VNS. routed(1): The traffic is routed at the controller. bridgeAtController(2): Traffic is bridged at controller. bridgeAtAP(3): Traff…
1.3.6.1.4.1.4329.15.3.3.1.2.1.16ColumnvnsVlanIDread-writecurrentVLAN tag for the packets trasmitted to/from of the VNS. This value has meaning if vnsMode is bridgeAtController(2) or bridgeAtAP(3). If vnsMode = bridgeAtContr…
1.3.6.1.4.1.4329.15.3.3.1.2.1.17ColumnvnsInterfaceNameread-writecurrentPhysical interface to be used in the controller for trasmitting/receiving packets for the VNS. This value has meaning if vnsMode is bridgeAtController(2).
1.3.6.1.4.1.4329.15.3.3.1.2.1.18ColumnvnsMgmIpAddressread-writecurrentIP address of the management port associated to this VNS. This value has meaning if vnsMode is bridgeAtController(2).
1.3.6.1.4.1.4329.15.3.3.1.2.1.19ColumnvnsSuppressSSIDread-writecurrentIf set to true, this prevents this SSID from appearing in the beacon message.
1.3.6.1.4.1.4329.15.3.3.1.2.1.20ColumnvnsEnable11hSupportread-writecurrentIf true, enables 802.11h support.
1.3.6.1.4.1.4329.15.3.3.1.2.1.21ColumnvnsApplyPowerBackOffread-writecurrentIndicates whether the AP will direct 802.11h-enabled clients to apply the same power back-off setting that the AP is using
1.3.6.1.4.1.4329.15.3.3.1.2.1.22ColumnvnsProcessClientIEReqread-writecurrentIf true, enables support for 802.11d client information request.
1.3.6.1.4.1.4329.15.3.3.1.2.1.23ColumnvnsDLSSupportEnableread-writecurrentIf true, enables support for DLS Support. This value has meaning only if vnsUseDHCPRelay is selected as localDhcp(2) and vnsMode is select as either routed(1) …
1.3.6.1.4.1.4329.15.3.3.1.2.1.24ColumnvnsDLSAddressread-writecurrentDNS IP Address for DLS associated to this VNS. It could be IP address or Name
1.3.6.1.4.1.4329.15.3.3.1.2.1.25ColumnvnsDLSPortread-writecurrentDNS Port for DLS associated to this VNS.
1.3.6.1.4.1.4329.15.3.3.1.2.1.26ColumnvnsRateControlProfileread-writecurrentThe Rate Control Profile that is referenced by this VNS.
1.3.6.1.4.1.4329.15.3.3.1.2.1.27ColumnvnsSessionAvailabilityEnableread-writecurrentTo indicate if Session Availability feature is enabled.
1.3.6.1.4.1.4329.15.3.3.1.2.1.28ColumnvnsEnabledread-writecurrentVNS status of being enabled or disabled.
1.3.6.1.4.1.4329.15.3.3.1.2.1.29ColumnvnsStrictSubnetAdherenceread-writecurrentSubnet adherence verification status for the VNS. Controller only learns devices whose address is within range of VNS segment definition. Disabling this field …
1.3.6.1.4.1.4329.15.3.3.1.2.1.30ColumnvnsSLPEnabledread-writecurrentStatus of SLP flag on Bridge at Controller type VNS. This field does not have any meaning for other types of VNS.
1.3.6.1.4.1.4329.15.3.3.1.2.1.31ColumnvnsConfigWLANIDread-writecurrentCreation of VNS requires existing of a free WLAN. One WLAN can only be used in one VNS only. This ID identifies the WLAN that is used for creation of VNS that …
1.3.6.1.4.1.4329.15.3.3.1.3TablevnsDHCPRangeTablenot-accessiblecurrentvnsDHCPRangeTable contains the IP address ranges that DHCP will serve to clients associated with this VNS.
1.3.6.1.4.1.4329.15.3.3.1.3.1RowvnsDHCPRangeEntrynot-accessiblecurrentConfiguration information for a DHCP range.
1.3.6.1.4.1.4329.15.3.3.1.3.1.1ColumnvnsDHCPRangeIndexread-writecurrentIndex for the DHCP row element.
1.3.6.1.4.1.4329.15.3.3.1.3.1.2ColumnvnsDHCPRangeStartread-writecurrentFirst IP address in the range.
1.3.6.1.4.1.4329.15.3.3.1.3.1.3ColumnvnsDHCPRangeEndread-writecurrentLast IP address in the range.
1.3.6.1.4.1.4329.15.3.3.1.3.1.4ColumnvnsDHCPRangeTyperead-writecurrentDetermines whether addresses in the specified range will be included, or excluded by the DHCP server.
1.3.6.1.4.1.4329.15.3.3.1.3.1.5ColumnvnsDHCPRangeStatusread-writecurrentRow status variable for row operations on the vnsDHCPRangeTable
1.3.6.1.4.1.4329.15.3.3.1.4TablevnsCaptivePortalTablenot-accessiblecurrentDetails of the Captive Portal login page for VNSes that have vnsAssignment=ssid and vnsAuthModel=captivePortal.
1.3.6.1.4.1.4329.15.3.3.1.4.1RowvnsCaptivePortalEntrynot-accessiblecurrentCaptive Portal Information for the VNS.
1.3.6.1.4.1.4329.15.3.3.1.4.1.1ColumncpURLread-writecurrentRedirect URL of the Captive Portal login page.
1.3.6.1.4.1.4329.15.3.3.1.4.1.2ColumncpLoginLabelread-writedeprecatedLabel that appears in front of the login field on the Captive Portal login page.
1.3.6.1.4.1.4329.15.3.3.1.4.1.3ColumncpPasswordLabelread-writedeprecatedLabel that appears in front of the password field on the Captive Portal login page.
1.3.6.1.4.1.4329.15.3.3.1.4.1.4ColumncpHeaderURLread-writedeprecatedURL of the Captive Portal header.
1.3.6.1.4.1.4329.15.3.3.1.4.1.5ColumncpFooterURLread-writedeprecatedURL of the Captive Portal footer.
1.3.6.1.4.1.4329.15.3.3.1.4.1.6ColumncpMessageread-writedeprecatedA welcome message, or set of instructions that is to appear on the Captive Portal login page.
1.3.6.1.4.1.4329.15.3.3.1.4.1.7ColumncpReplaceGatewayWithFQDNread-writecurrentFully Qualified Domain Name (FQDN) to be used as the gateway IP address.
1.3.6.1.4.1.4329.15.3.3.1.4.1.8ColumncpDefaultRedirectionURLread-writecurrentDefault Redirect URL of the Captive Portal login page.
1.3.6.1.4.1.4329.15.3.3.1.4.1.9ColumncpConnectionIPread-writecurrentIP address of the Controller interface for Captive Portal.
1.3.6.1.4.1.4329.15.3.3.1.4.1.10ColumncpConnectionPortread-writecurrentPort number on the cpConnectionIP interface.
1.3.6.1.4.1.4329.15.3.3.1.4.1.11ColumncpSharedSecretread-writecurrentSecret Key to be used to encrypt the information passed between the Controller and the external web server. It is the password common to both Controller and th…
1.3.6.1.4.1.4329.15.3.3.1.4.1.12ColumncpLogOffread-writecurrentToggles the display of logoff popup screen, allowing users to control their logoff.
1.3.6.1.4.1.4329.15.3.3.1.4.1.13ColumncpStatusCheckread-writecurrentToggles the display of popup window with session statistics for users to monitor their usage and time left in session.
1.3.6.1.4.1.4329.15.3.3.1.4.1.14ColumncpTyperead-writecurrentType of captive portal is enabled for the selected VNS. none(1) = no captive portal configured or type is unknown. internal(2) = internal captive portal. exter…
1.3.6.1.4.1.4329.15.3.3.1.5TablevnsRadiusServerTablenot-accessiblecurrentList of RADIUS servers to be utilized for authentication in the VNS.
1.3.6.1.4.1.4329.15.3.3.1.5.1RowvnsRadiusServerEntrynot-accessiblecurrentConfiguration information for a RADIUS server.
1.3.6.1.4.1.4329.15.3.3.1.5.1.1ColumnvnsRadiusServerNameread-writecurrentName of the RADIUS server.
1.3.6.1.4.1.4329.15.3.3.1.5.1.2ColumnvnsRadiusServerPortread-writecurrentPort number for the RADIUS server.
1.3.6.1.4.1.4329.15.3.3.1.5.1.3ColumnvnsRadiusServerRetriesread-writecurrentNumber of retries for a RADIUS authentication request.
1.3.6.1.4.1.4329.15.3.3.1.5.1.4ColumnvnsRadiusServerTimeoutread-writecurrentDelay between requests.
1.3.6.1.4.1.4329.15.3.3.1.5.1.5ColumnvnsRadiusServerSharedSecretread-writecurrentShared secret to be used between the NAS and RADIUS server.
1.3.6.1.4.1.4329.15.3.3.1.5.1.6ColumnvnsRadiusServerNASIdentifierread-writecurrentNAS identifier to be included in RADIUS request.
1.3.6.1.4.1.4329.15.3.3.1.5.1.7ColumnvnsRadiusServerAuthTyperead-writecurrentChallenge mechanism for the request.
1.3.6.1.4.1.4329.15.3.3.1.5.1.8ColumnvnsRadiusServerRowStatusread-writecurrentRowStatus value for manipulating vnsRADIUSServerTable.
1.3.6.1.4.1.4329.15.3.3.1.5.1.9ColumnvnsRadiusServerNasAddressread-writecurrentNAS address to be included in RADIUS request.
1.3.6.1.4.1.4329.15.3.3.1.6TablevnsFilterIDTablenot-accessiblecurrentTable of names filters for a VNS.
1.3.6.1.4.1.4329.15.3.3.1.6.1RowvnsFilterIDEntrynot-accessiblecurrentName of a specific filter in the VNS.
1.3.6.1.4.1.4329.15.3.3.1.6.1.1ColumnvnsFilterIDread-writecurrentFilter names.
1.3.6.1.4.1.4329.15.3.3.1.6.1.2ColumnvnsFilterIDStatusread-writecurrentRowStatus for operating on vnsFilterIDTable.
1.3.6.1.4.1.4329.15.3.3.1.7TablevnsFilterRuleTablenot-accessiblecurrentTable containing specific filters for a named filter.
1.3.6.1.4.1.4329.15.3.3.1.7.1RowvnsFilterRuleEntrynot-accessiblecurrentFilter elements for an individual VNS filter.
1.3.6.1.4.1.4329.15.3.3.1.7.1.1ColumnvnsFilterRuleOrderread-writecurrentPosition of the filter in the filter list.
1.3.6.1.4.1.4329.15.3.3.1.7.1.2ColumnvnsFilterRuleDirectionread-writecurrentTraffic direction defined by the rule.
1.3.6.1.4.1.4329.15.3.3.1.7.1.3ColumnvnsFilterRuleActionread-writecurrentAllow or deny traffic for the filter.
1.3.6.1.4.1.4329.15.3.3.1.7.1.4ColumnvnsFilterRuleIPAddressread-writecurrentIP address to apply the filter.
1.3.6.1.4.1.4329.15.3.3.1.7.1.5ColumnvnsFilterRulePortLowread-writecurrentLow port number for the filter.
1.3.6.1.4.1.4329.15.3.3.1.7.1.6ColumnvnsFilterRulePortHighread-writecurrentHigh port number for the filter.
1.3.6.1.4.1.4329.15.3.3.1.7.1.7ColumnvnsFilterRuleProtocolread-writecurrentSpecific protocol to filter.
1.3.6.1.4.1.4329.15.3.3.1.7.1.8ColumnvnsFilterRuleEtherTyperead-writecurrentSpecific ethertype to filter.
1.3.6.1.4.1.4329.15.3.3.1.7.1.9ColumnvnsFilterRuleStatusread-writecurrentRowStatus value for the vnsFilterRuleTable.
1.3.6.1.4.1.4329.15.3.3.1.8TablevnsPrivacyTablenot-accessiblecurrentTable of privacy settings for the VNS.
1.3.6.1.4.1.4329.15.3.3.1.8.1RowvnsPrivacyEntrynot-accessiblecurrentConfiguration values for a specific privacy setting.
1.3.6.1.4.1.4329.15.3.3.1.8.1.1ColumnvnsPrivWEPKeyTyperead-writecurrentType of key in use. none(1) = not cofigured, wepstatic(2) = static WEP, wpapsk(3) = WPA Pre-Shared Key, dynamic(4) = dynamically assigned, wpa(5) = WPA.
1.3.6.1.4.1.4329.15.3.3.1.8.1.2ColumnvnsPrivDynamicRekeyFrequencyread-writecurrentDynamic WEP re-keying frequency, in seconds. Setting this value to 0 disables rekeying. This value is only meaningful if vnsPrivWEPKeyType = wpapsk(3). For any…
1.3.6.1.4.1.4329.15.3.3.1.8.1.3ColumnvnsPrivWEPKeyLengthread-writecurrentWEP key length, 64, 128, or 152 bits. If vnsPrivWEPKeyType is none, reading or setting this value will return an unsuccessful status and will return a value of…
1.3.6.1.4.1.4329.15.3.3.1.8.1.4ColumnvnsPrivWPA1Enabledread-writecurrentEnables WPA.1 (Wi-Fi Protected Access).
1.3.6.1.4.1.4329.15.3.3.1.8.1.5ColumnvnsPrivUseSharedKeyread-writecurrentEnables the use of WPA shared key for this VNS.
1.3.6.1.4.1.4329.15.3.3.1.8.1.6ColumnvnsPrivWPASharedKeyread-writecurrentThe value of the WPA shared key for this VNS. This value is logically WRITE ONLY. Attempts to read this value shall return unsuccessful status and values of nu…
1.3.6.1.4.1.4329.15.3.3.1.8.1.7ColumnvnsPrivWPA2Enabledread-writecurrentWhen true, WPA v.2 support is enabled.
1.3.6.1.4.1.4329.15.3.3.1.9TablevnsWEPKeyTablenot-accessiblecurrentTable of WEP key entries for a static WEP definition.
1.3.6.1.4.1.4329.15.3.3.1.9.1RowvnsWEPKeyEntrynot-accessiblecurrentWEP key for a single entry in the table.
1.3.6.1.4.1.4329.15.3.3.1.9.1.1ColumnvnsWEPKeyIndexread-writecurrentTable index for the WEP key.
1.3.6.1.4.1.4329.15.3.3.1.9.1.2ColumnvnsWEPKeyValueread-writecurrentValue of a WEP key for this VNS. This value is logically WRITE ONLY. Attempts to read this value shall return unsuccessful status and values of null or zero.
1.3.6.1.4.1.4329.15.3.3.1.10Tablevns3rdPartyAPTablenot-accessiblecurrentContains a list of 3rd Party access points for the EWC.
1.3.6.1.4.1.4329.15.3.3.1.10.1Rowvns3rdPartyAPEntrynot-accessiblecurrentConfiguration information for a 3rd party access point.
1.3.6.1.4.1.4329.15.3.3.1.10.1.1ColumnapMacAddressread-writecurrentEthernet MAC address of the 3rd party access point.
1.3.6.1.4.1.4329.15.3.3.1.10.1.2ColumnapIpAddressread-writecurrentIP address of the 3rd party access point.
1.3.6.1.4.1.4329.15.3.3.1.11TablevnsQoSTablenot-accessiblecurrentThis table contains list of per-VNS QoS related configuration.
1.3.6.1.4.1.4329.15.3.3.1.11.1RowvnsQoSEntrynot-accessiblecurrentAn entry related to QoS configuration for the VNS indexed by vnsIfIndex.
1.3.6.1.4.1.4329.15.3.3.1.11.1.1ColumnvnsQoSWirelessLegacyFlagread-writecurrentThis variable is used to enable/disable legacy QoS feature.
1.3.6.1.4.1.4329.15.3.3.1.11.1.2ColumnvnsQoSWirelessWMMFlagread-writecurrentThis variable is used to enable/disable WMM feature.
1.3.6.1.4.1.4329.15.3.3.1.11.1.3ColumnvnsQoSWireless80211eFlagread-writecurrentThis variable is used to enable/disable 802.11e feature.
1.3.6.1.4.1.4329.15.3.3.1.11.1.4ColumnvnsQoSWirelessTurboVoiceFlagread-writecurrentThis variable is used to enable/disable turbo feature.
1.3.6.1.4.1.4329.15.3.3.1.11.1.5ColumnvnsQoSPriorityOverrideFlagread-writecurrentEnable/disable the use of DSCP to override Servic Class (SC) value.
1.3.6.1.4.1.4329.15.3.3.1.11.1.6ColumnvnsQoSPriorityOverrideSCread-writecurrentService class (SC) of the override value. This field has a meaning if vnsQoSPriorityOverrideFlag is enabled.
1.3.6.1.4.1.4329.15.3.3.1.11.1.7ColumnvnsQoSPriorityOverrideDSCPread-writecurrentDSCP override value to be used for the service class. This field has a meaning if vnsQoSPriorityOverrideFlag is enabled.
1.3.6.1.4.1.4329.15.3.3.1.11.1.8ColumnvnsQoSClassificationServiceClassread-writecurrentService Class value for the DSCP code. This field is 64-bytes long. Each byte represents mapping between DSCP and Service Class. Position of each byte in the a…
1.3.6.1.4.1.4329.15.3.3.1.11.1.9ColumnvnsQoSWirelessEnableUAPSDread-writecurrentThis variable is used to enable/disable U-APSD feature.
1.3.6.1.4.1.4329.15.3.3.1.11.1.10ColumnvnsQoSWirelessUseAdmControlVoiceread-writecurrentIf enabled, admission control for voice traffic is used.
1.3.6.1.4.1.4329.15.3.3.1.11.1.11ColumnvnsQoSWirelessUseAdmControlVideoread-writecurrentIf enabled, admission control for vedio traffic is used. This field has a meaning if vnsQoSUseGlobalAdmVoice is enabled.
1.3.6.1.4.1.4329.15.3.3.1.11.1.12ColumnvnsQoSWirelessULPolicerActionread-writecurrentIf doNothing is selected, no action is taken. This is default value. If sendDELTStoClient is selected, AP will send DELTS if a client is abusing in uplink. Thi…
1.3.6.1.4.1.4329.15.3.3.1.11.1.13ColumnvnsQoSWirelessDLPolicerActionread-writecurrentIf doNothing is selected, no action is taken. This is default value. If downgrade is selected, AP will downgrade all traffic to the highest AC that does not re…
1.3.6.1.4.1.4329.15.3.3.1.11.1.14ColumnvnsQoSWirelessUseAdmControlBestEffortread-writecurrentIf enabled, admission control for video traffic is set to Best Effort. This field has a meaning if vnsQoSUseGlobalAdmVoice is enabled.
1.3.6.1.4.1.4329.15.3.3.1.11.1.15ColumnvnsQoSWirelessUseAdmControlBackgroundread-writecurrentIf enabled, admission control for video traffic is set to Background. This field has a meaning if vnsQoSUseGlobalAdmVoice is enabled.
1.3.6.1.4.1.4329.15.3.3.1.12TablevnsWDSRFTablenot-accessibleobsoleteontains definitions of the Wireless Distirbution System (WDS) VNS defined on this Controller.
1.3.6.1.4.1.4329.15.3.3.1.12.1RowvnsWDSRFEntrynot-accessibleobsoleteConfiguration elements for a specific WDS VNS.
1.3.6.1.4.1.4329.15.3.3.1.12.1.1ColumnvnsWDSRFAPNameread-writeobsoleteAP name.
1.3.6.1.4.1.4329.15.3.3.1.12.1.2ColumnvnsWDSRFbgServiceread-writeobsoleteType of service offered by this radio.
1.3.6.1.4.1.4329.15.3.3.1.12.1.3ColumnvnsWDSRFaServiceread-writeobsoleteType of service offered by this radio.
1.3.6.1.4.1.4329.15.3.3.1.12.1.4ColumnvnsWDSRFPreferredParentread-writeobsoleteDesired preferred parent.
1.3.6.1.4.1.4329.15.3.3.1.12.1.5ColumnvnsWDSRFBackupParentread-writeobsoleteDesired backup parent.
1.3.6.1.4.1.4329.15.3.3.1.12.1.6ColumnvnsWDSRFBridgeread-writeobsoleteWDS bridge status.
1.3.6.1.4.1.4329.15.3.3.1.13TablevnsRateControlProfTablenot-accessibleobsoleteTable of Rate Control Profiles.
1.3.6.1.4.1.4329.15.3.3.1.13.1RowvnsRateControlProfEntrynot-accessibleobsoleteName of a specific Rate Control Profile.
1.3.6.1.4.1.4329.15.3.3.1.13.1.1ColumnvnsRateControlProfIndread-writeobsoleteA monotonically increasing integer which acts as index of entries within the named Rate Control Profiles.
1.3.6.1.4.1.4329.15.3.3.1.13.1.2ColumnvnsRateControlProfNameread-writeobsoleteRate Control Profile Name.
1.3.6.1.4.1.4329.15.3.3.1.13.1.3ColumnvnsRateControlCIRread-writeobsoleteRate Control Average Rate (CIR) in kbps.
1.3.6.1.4.1.4329.15.3.3.1.13.1.4ColumnvnsRateControlCBSread-writeobsoleteRate Control Burst Size (CBS) in bytes.
1.3.6.1.4.1.4329.15.3.3.1.14TablevnsAPFilterTablenot-accessiblecurrentFilters applied to Access Points via VNS settings and assignments.
1.3.6.1.4.1.4329.15.3.3.1.14.1RowvnsAPFilterEntrynot-accessiblecurrentAn entry containing filters definition for Access Points assigned to VNS that is identified by VNS index.
1.3.6.1.4.1.4329.15.3.3.1.14.1.1ColumnvnsAPFilterRuleOrderread-createcurrentPosition of the filter in the filter list.
1.3.6.1.4.1.4329.15.3.3.1.14.1.2ColumnvnsAPFilterRuleDirectionread-createcurrentTraffic direction related to the filter rule.
1.3.6.1.4.1.4329.15.3.3.1.14.1.3ColumnvnsAPFilterActionread-createcurrentAllow or deny traffic for the filter.
1.3.6.1.4.1.4329.15.3.3.1.14.1.4ColumnvnsAPFilterIPAddressread-createcurrentIP address applied to the filter.
1.3.6.1.4.1.4329.15.3.3.1.14.1.5ColumnvnsAPFilterMaskread-createcurrentThe mask, number of bits set to one in the mask, applied to filter IP address.
1.3.6.1.4.1.4329.15.3.3.1.14.1.6ColumnvnsAPFilterPortLowread-createcurrentLow port number for the filter.
1.3.6.1.4.1.4329.15.3.3.1.14.1.7ColumnvnsAPFilterPortHighread-createcurrentHigh port number for the filter.
1.3.6.1.4.1.4329.15.3.3.1.14.1.8ColumnvnsAPFilterProtocolread-createcurrentSpecific protocol for the filter.
1.3.6.1.4.1.4329.15.3.3.1.14.1.9ColumnvnsAPFilterEtherTyperead-createcurrentSpecific ethertype to the filter.
1.3.6.1.4.1.4329.15.3.3.1.14.1.10ColumnvnsAPFilterRowStatusread-createcurrentRowStatus value for this table entry.
1.3.6.1.4.1.4329.15.3.3.2NodevnsStatsObjects
1.3.6.1.4.1.4329.15.3.3.2.1ScalaractiveVNSSessionCountread-writecurrentNumber of active VNSs.
1.3.6.1.4.1.4329.15.3.3.2.2TablevnsStatTablenot-accessibleobsoleteDescription.
1.3.6.1.4.1.4329.15.3.3.2.2.1RowvnsStatEntrynot-accessibleobsoleteDescription.
1.3.6.1.4.1.4329.15.3.3.2.2.1.1ColumnvnsStatNameread-writeobsoleteName of the VNS.
1.3.6.1.4.1.4329.15.3.3.2.2.1.2ColumnvnsStatTxPktsread-onlyobsoleteTrasmitted packets.
1.3.6.1.4.1.4329.15.3.3.2.2.1.3ColumnvnsStatRxPktsread-onlyobsoleteReceived packtes.
1.3.6.1.4.1.4329.15.3.3.2.2.1.4ColumnvnsStatTxOctectsread-onlyobsoleteTrasmitted octects.
1.3.6.1.4.1.4329.15.3.3.2.2.1.5ColumnvnsStatRxOctectsread-onlyobsoleteReceived octets.
1.3.6.1.4.1.4329.15.3.3.2.2.1.6ColumnvnsStatMulticastTxPktsread-onlyobsoleteMulticast trasmitted packets.
1.3.6.1.4.1.4329.15.3.3.2.2.1.7ColumnvnsStatMulticastRxPktsread-onlyobsoleteMulticast received packets.
1.3.6.1.4.1.4329.15.3.3.2.2.1.8ColumnvnsStatBroadcastTxPktsread-onlyobsoleteBroadcast trasmitted packets.
1.3.6.1.4.1.4329.15.3.3.2.2.1.9ColumnvnsStatBroadcastRxPktsread-onlyobsoleteBroadcast received packets.
1.3.6.1.4.1.4329.15.3.3.2.2.1.10ColumnvnsStatRadiusTotRequestsread-onlyobsoleteTotal requests sent to radius server.
1.3.6.1.4.1.4329.15.3.3.2.2.1.11ColumnvnsStatRadiusReqFailedread-onlyobsoleteRequests that failed to be processed by radius server.
1.3.6.1.4.1.4329.15.3.3.2.2.1.12ColumnvnsStatRadiusReqRejectedread-onlyobsoleteRequests that have been rejected by radius server.
1.3.6.1.4.1.4329.15.3.3.2.3TablevnsExceptionStatTablenot-accessibleobsoleteDescription.
1.3.6.1.4.1.4329.15.3.3.2.3.1RowvnsExceptionStatEntrynot-accessibleobsoleteDescription.
1.3.6.1.4.1.4329.15.3.3.2.3.1.1ColumnvnsExceptionFiterNameread-writeobsoleteFilter name.
1.3.6.1.4.1.4329.15.3.3.2.3.1.2ColumnvnsExceptionStatPktsDeniedread-onlyobsoleteTotal packets that are denied by defined filters.
1.3.6.1.4.1.4329.15.3.3.2.3.1.3ColumnvnsExceptionStatPktsAllowedread-onlyobsoleteTotal packets that are allowed by defined filters.
1.3.6.1.4.1.4329.15.3.3.2.4TablevnsWDSStatTablenot-accessibleobsoleteDescription.
1.3.6.1.4.1.4329.15.3.3.2.4.1RowvnsWDSStatEntrynot-accessibleobsoleteDescription.
1.3.6.1.4.1.4329.15.3.3.2.4.1.1ColumnvnsWDSStatAPNameread-writeobsoleteAP name serving WDS VNS.
1.3.6.1.4.1.4329.15.3.3.2.4.1.2ColumnvnsWDSStatAPRoleread-writeobsoleteRole of the AP in WDS tree. All the statistics and configuration information in this table has no meaning if the role is unknown(-1).
1.3.6.1.4.1.4329.15.3.3.2.4.1.3ColumnvnsWDSStatAPRadioread-writeobsoleteRadio and freq on which uplink WDS is established, N/A if connected over etherent (value are 'a:<freq>', 'b/g:<freq>', or 'N/A')
1.3.6.1.4.1.4329.15.3.3.2.4.1.4ColumnvnsWDSStatAPParentread-writeobsoleteAP Name of the parent AP.
1.3.6.1.4.1.4329.15.3.3.2.4.1.5ColumnvnsWDSStatSSIDread-writeobsoleteSSID of the WDS VNS where parent WDS link is established.
1.3.6.1.4.1.4329.15.3.3.2.4.1.6ColumnvnsWDSStatRxFrameread-writeobsoleteReceived frames from the parent AP.
1.3.6.1.4.1.4329.15.3.3.2.4.1.7ColumnvnsWDSStatTxFrameread-writeobsoleteTransmitted frames to the parent AP.
1.3.6.1.4.1.4329.15.3.3.2.4.1.8ColumnvnsWDSStatRxErrorread-writeobsoleteReceived frames in error from the parent AP.
1.3.6.1.4.1.4329.15.3.3.2.4.1.9ColumnvnsWDSStatTxErrorread-writeobsoleteTransmitted frames in error to the parent AP.
1.3.6.1.4.1.4329.15.3.3.2.4.1.10ColumnvnsWDSStatRxRSSIread-writeobsoleteAverage Received Signal Strength Indicator (RSSI).
1.3.6.1.4.1.4329.15.3.3.2.4.1.11ColumnvnsWDSStatRxRateread-writeobsoleteAverage receive rate.
1.3.6.1.4.1.4329.15.3.3.2.4.1.12ColumnvnsWDSStatTxRateread-writeobsoleteAverage transmission rate.
1.3.6.1.4.1.4329.15.3.3.3NodevnsGlobalSetting
1.3.6.1.4.1.4329.15.3.3.3.1NodewirelessQoS
1.3.6.1.4.1.4329.15.3.3.3.1.1ScalarmaxVoiceBWforReassociationread-writecurrentMaximum voice bandwidth to be used for re-association.
1.3.6.1.4.1.4329.15.3.3.3.1.2ScalarmaxVoiceBWforAssociationread-writecurrentMaximum voice bandwidth to be used for association.
1.3.6.1.4.1.4329.15.3.3.3.1.3ScalarmaxVideoBWforReassociationread-writecurrentMaximum video bandwidth to be used for re-association.
1.3.6.1.4.1.4329.15.3.3.3.1.4ScalarmaxVideoBWforAssociationread-writecurrentMaximum video bandwidth to be used for association.
1.3.6.1.4.1.4329.15.3.3.3.1.5ScalarmaxBestEffortBWforReassociationread-writecurrentMaximum best effort bandwidth to be used for reassociation.
1.3.6.1.4.1.4329.15.3.3.3.1.6ScalarmaxBestEffortBWforAssociationread-writecurrentMaximum best effort bandwidth to be used for association.
1.3.6.1.4.1.4329.15.3.3.3.1.7ScalarmaxBackgroundBWforReassociationread-writecurrentMaximum background bandwidth to be used for reassociation.
1.3.6.1.4.1.4329.15.3.3.3.1.8ScalarmaxBackgroundBWforAssociationread-writecurrentMaximum background bandwidth to be used for association.
1.3.6.1.4.1.4329.15.3.3.3.2NoderadiusInfo
1.3.6.1.4.1.4329.15.3.3.3.2.2TableexternalRadiusServerTablenot-accessibleobsoleteTable of external RADIUS servers available for authentication services.
1.3.6.1.4.1.4329.15.3.3.3.2.2.1RowexternalRadiusServerEntrynot-accessibleobsoleteConfiguration information about the RADIUS server entry.
1.3.6.1.4.1.4329.15.3.3.3.2.2.1.1ColumnexternalRadiusServerNameread-writeobsoleteRADIUS server name.
1.3.6.1.4.1.4329.15.3.3.3.2.2.1.2ColumnexternalRadiusServerAddressread-writeobsoleteRADIUS server address, it can be either string or IP address.
1.3.6.1.4.1.4329.15.3.3.3.2.2.1.3ColumnexternalRadiusServerSharedSecretread-writeobsoleteShared secret between Radius and the client.
1.3.6.1.4.1.4329.15.3.3.3.2.2.1.4ColumnexternalRadiusServerRowStatusread-writeobsoleteRow Status for the entry.
1.3.6.1.4.1.4329.15.3.3.3.3NodedasInfo
1.3.6.1.4.1.4329.15.3.3.3.3.1ScalardasPortread-writecurrentDynamic Authorization Server (DAS) port.
1.3.6.1.4.1.4329.15.3.3.3.3.2ScalardasReplayIntervalread-writecurrentThe time window for message timeliness and replay protection for DAS packets. Packets should be dropped that their time generation is outside of this specified…
1.3.6.1.4.1.4329.15.3.3.3.4ScalaradvancedFilteringModeread-writecurrentValue of 'enabled(1)' means EWC is operating in advanced filtering configuration mode. Value of 'disabled(0)' means EWC is operating in mode that is compatible…
1.3.6.1.4.1.4329.15.3.3.3.5ScalarradiusStrictModeread-writecurrentIf this variable set to true, then assignment of RADIUS server(s) to WLAN are automatic during WLAN creation, otherwise, assignment of RADIUS server(s) to WLAN…
1.3.6.1.4.1.4329.15.3.3.3.6NoderadiusFastFailoverEvents
1.3.6.1.4.1.4329.15.3.3.3.6.1TableradiusFastFailoverEventsTablenot-accessiblecurrentTable in which to configure which RADIUS servers will be sent interim accounting reports for stations when a fast failover incident occurs
1.3.6.1.4.1.4329.15.3.3.3.6.1.1RowradiusFastFailoverEventsEntrynot-accessiblecurrentAn entry for each radius server.
1.3.6.1.4.1.4329.15.3.3.3.6.1.1.1ColumnradiusFFOEidnot-accessiblecurrentThe IP address or hostname of configured radius server. If the hostname is created from GUI/CLI and the size is bigger than 64 characters, snmp will display th…
1.3.6.1.4.1.4329.15.3.3.3.6.1.1.2ColumnfastFailoverEventsread-writecurrentIf true, send an interim accounting record to the RADIUS server for each affected station when a fast failover event occurs. This field can be modified when co…
1.3.6.1.4.1.4329.15.3.3.3.7NodedhcpRelayListeners
1.3.6.1.4.1.4329.15.3.3.3.7.1ScalardhcpRelayListenersMaxEntriesread-onlycurrentMaximum number of servers to which DHCP messages are relayed .
1.3.6.1.4.1.4329.15.3.3.3.7.2ScalardhcpRelayListenersNumEntriesread-onlycurrentThe current number of entries in the dhcpRelayListenersTable.
1.3.6.1.4.1.4329.15.3.3.3.7.3ScalardhcpRelayListenersNextIndexread-onlycurrentThis object indicates numerically lowest available index within this entity, which may be used for the value of index in the creation of new entry in dhcpRelay…
1.3.6.1.4.1.4329.15.3.3.3.7.4TabledhcpRelayListenersTablenot-accessiblecurrentA list of servers to which DHCP messages are relayed but from which no responses are expected.
1.3.6.1.4.1.4329.15.3.3.3.7.4.1RowdhcpRelayListenersEntrynot-accessiblecurrentAn entry for each dhcpRelayListeners.
1.3.6.1.4.1.4329.15.3.3.3.7.4.1.1ColumndhcpRelayListenersIDnot-accessiblecurrentThe id corresponds to the 'server number' in the controller GUI and CLI.
1.3.6.1.4.1.4329.15.3.3.3.7.4.1.2ColumndhcpRelayListenersRowStatusread-createcurrentThis object allows dynamic creation and deletion of entries within dhcpRelayListenersTable as well as activation and deactivation of these entries. For row cre…
1.3.6.1.4.1.4329.15.3.3.3.7.4.1.3ColumndestinationNameread-writecurrentText string uniquely identifying NAC Server Name. Allowable characters for this field are from the set of A-Z, a-z, -_!#$, 0-9, and space. max len is 63 chars …
1.3.6.1.4.1.4329.15.3.3.3.7.4.1.4ColumndestinationIPread-writecurrentIPv4 address to which DHCP messages are relayed.
1.3.6.1.4.1.4329.15.3.3.3.8ScalarclientAutologinOptionread-writecurrentMany devices such as those made by Apple(R) implement an autologin feature that prompts the user to login as soon as the device detects the presence of a Capti…
1.3.6.1.4.1.4329.15.3.3.3.9NodeauthenticationAdvanced
1.3.6.1.4.1.4329.15.3.3.3.9.1ScalarincludeServiceTyperead-writecurrentInclude the Service-Type attribute in client access request messages when this field is set to enable(1).
1.3.6.1.4.1.4329.15.3.3.3.9.2ScalarclientMessageDelayTimeread-writecurrentThis field specifies how long, in seconds, the notice Web page is displayed to the client when the topology changes as a result of a role change. The notice We…
1.3.6.1.4.1.4329.15.3.3.3.9.3ScalarradiusAccountingread-writecurrentThis field enables or disables RADIUS accounting. Disabling RADIUS accounting overrides the RADIUS accounting settings of individual WLAN Services. Enabling RA…
1.3.6.1.4.1.4329.15.3.3.3.9.4ScalarserverUsageModelread-writecurrentThis field specifies RADIUS server failover behavior when the primary server goes down. When the primary server is down the controller moves on to the secondar…
1.3.6.1.4.1.4329.15.3.3.3.9.5ScalarradacctStartOnIPAddrread-writecurrentWhen this OID is set to disabled (0) the controller sends a RADIUS accounting start message as soon as it receives an Access-Accept for the user from a RADIUS …
1.3.6.1.4.1.4329.15.3.3.3.9.6ScalarclientServiceTypeLoginread-writecurrentWhen this OID is set to enabled(1) the controller sets the Service-Type attribute of a station's Access-Request to 'Login'. When this OID is set to disabled(0)…
1.3.6.1.4.1.4329.15.3.3.3.9.7ScalarapplyMacAddressFormatread-writecurrentWhen this OID is set to enabled(1), the controller uses MAC-Based Authentication MAC address format (refer to radiusMacAddressFormatOption) for user authentica…
1.3.6.1.4.1.4329.15.3.3.3.10NoderadiusExtnsSetting
1.3.6.1.4.1.4329.15.3.3.3.10.1TableradiusExtnsSettingTablenot-accessiblecurrentList of RADIUS servers that will be used.
1.3.6.1.4.1.4329.15.3.3.3.10.1.1RowradiusExtnsSettingEntrynot-accessiblecurrentAn entry for each RADIUS server.
1.3.6.1.4.1.4329.15.3.3.3.10.1.1.1ColumnradiusExtnsIndexnot-accessiblecurrentA number uniquely identifying each conceptual row in the radiusExtnsSettingTable. This value also equivalent to etsysRadiusAuthServerIndex of enterasys-radius-…
1.3.6.1.4.1.4329.15.3.3.3.10.1.1.2ColumnpollingMechanismread-writecurrentThis field specifies the method to determine the health of the RADIUS server. If set to useRFC5997StatusServerRequest(1), RFC 5997 Status-Server packets will b…
1.3.6.1.4.1.4329.15.3.3.3.10.1.1.3ColumnserverPollingIntervalread-writecurrentInterval in seconds for the controller to poll the primary server.
1.3.6.1.4.1.4329.15.3.3.3.11NodenetflowAndMirrorN
1.3.6.1.4.1.4329.15.3.3.3.11.1ScalarnetflowDestinationIPread-writecurrentThe IP address for the Purview engine that will receive netflow records.
1.3.6.1.4.1.4329.15.3.3.3.11.2ScalarnetflowIntervalread-writecurrentThe netflow record sending interval.
1.3.6.1.4.1.4329.15.3.3.3.11.3ScalarmirrorFirstNread-writecurrentIf non-zero, the first N packets of a particular flow will be mirrored. If 0, all packets will be mirrored.
1.3.6.1.4.1.4329.15.3.3.3.11.4ScalarmirrorL2Portsread-writecurrentConfigure the mirror port(s) on the controller. The default value is None. Only l2ports will be allowed to be selected and only when not referred to elsewhere …
1.3.6.1.4.1.4329.15.3.3.3.12ScalarradiusMacAddressFormatOptionread-writecurrentThe controller allows configuring different kinds of Mac address format in RADIUS messages. option1: mac address format as XXXXXXXXXXXX option2: mac address fo…
1.3.6.1.4.1.4329.15.3.3.4Nodewlan
1.3.6.1.4.1.4329.15.3.3.4.1ScalarwlanMaxEntriesread-onlycurrentMaximum number of WLAN supported by the device.
1.3.6.1.4.1.4329.15.3.3.4.2ScalarwlanNumEntriesread-onlycurrentThe current number of entries in the wlanTable.
1.3.6.1.4.1.4329.15.3.3.4.3ScalarwlanTableNextAvailableIndexread-onlycurrentThis object indicates numerically lowest available index within this entity, which may be used for the value of index in the creation of new entry in wlanTable…
1.3.6.1.4.1.4329.15.3.3.4.4TablewlanTablenot-accessiblecurrentTable of configured WLAN.
1.3.6.1.4.1.4329.15.3.3.4.4.1RowwlanEntrynot-accessiblecurrentAn entry for each WLAN.
1.3.6.1.4.1.4329.15.3.3.4.4.1.1ColumnwlanIDread-onlycurrentUnique internal ID associated with WLAN.
1.3.6.1.4.1.4329.15.3.3.4.4.1.2ColumnwlanRowStatusread-writecurrentThis object allows dynamic creation and deletion of entries within wlanTable as well as activation and deactivation of these entries. For row creation, EWC onl…
1.3.6.1.4.1.4329.15.3.3.4.4.1.3ColumnwlanServiceTyperead-writecurrentService type of WLAN.
1.3.6.1.4.1.4329.15.3.3.4.4.1.4ColumnwlanNameread-writecurrentText string uniquely identifying WLAN within EWC. Allowable characters for this field are from the set of A-Z, a-z, -!#$:, 0-9, and space. Howerver, it is reco…
1.3.6.1.4.1.4329.15.3.3.4.4.1.5ColumnwlanSSIDread-writecurrentSSID (broadcast string) associated with WLAN. Allowable characters for this field are from the set of A-Z, a-z, _-.@, 0-9, and space. Howerver, it is recommend…
1.3.6.1.4.1.4329.15.3.3.4.4.1.6ColumnwlanSynchronizeread-writecurrentIf it is set to true, then WLAN will be replicated to peer controller if availability is configured and enabled.
1.3.6.1.4.1.4329.15.3.3.4.4.1.7ColumnwlanEnabledread-writecurrentThis field is used to enable or disable this WLAN. If WLAN is disabled, then no traffic will be passed on behalf of this WLAN.
1.3.6.1.4.1.4329.15.3.3.4.4.1.8ColumnwlanDefaultTopologyIDread-writecurrentThe ID of topology from topologyTable associated to this WLAN. Topology ID of -1 means no default topology is associated to this WLAN. Physical topologies cann…
1.3.6.1.4.1.4329.15.3.3.4.4.1.9ColumnwlanSessionTimeoutread-writecurrentMU session that is associated to this WLAN will be terminated after elapse of this number of minutes from the start of its current session.
1.3.6.1.4.1.4329.15.3.3.4.4.1.10ColumnwlanIdleTimeoutPreAuthread-writecurrentElapse time between association and authentication after which MU session will be terminated if the user is idle this amount of time without being authenticate…
1.3.6.1.4.1.4329.15.3.3.4.4.1.11ColumnwlanIdleSessionPostAuthread-writecurrentMU session that is associated to this WLAN will be terminated if the user is idle this amount of time after being authenticated.
1.3.6.1.4.1.4329.15.3.3.4.4.1.12ColumnwlanSupressSSIDread-writecurrentIf it is set to true then broadcast string (SSID) for this WLAN will not be broadcasted over the air.
1.3.6.1.4.1.4329.15.3.3.4.4.1.13ColumnwlanDot11hSupportread-writecurrentIf it is set to true then dot11h support is enabled for clients associated to this WLAN.
1.3.6.1.4.1.4329.15.3.3.4.4.1.14ColumnwlanDot11hClientPowerReductionread-writecurrentIf it is set to true then apply power reduction to dot11h clients associated to this WLAN. This field has meaning if wlanDot11hSupport is enabled (set to true).
1.3.6.1.4.1.4329.15.3.3.4.4.1.15ColumnwlanProcessClientIEread-writecurrentIf it is set to true then clients that are associated to this WLAN their IE requests will be processed.
1.3.6.1.4.1.4329.15.3.3.4.4.1.16ColumnwlanEngerySaveModeread-writecurrentIf it is set to true then engergy saving mode is enabled.
1.3.6.1.4.1.4329.15.3.3.4.4.1.17ColumnwlanBlockMuToMuTrafficread-writecurrentIf it is set to true then two MU associated to this WLAN cannot communicate with each other.
1.3.6.1.4.1.4329.15.3.3.4.4.1.18ColumnwlanRemoteableread-writecurrentIf it is set to true then this WLAN can be used as remote WLAN within mobility zone that this controller is partaking.
1.3.6.1.4.1.4329.15.3.3.4.4.1.19ColumnwlanVNSIDread-onlycurrentThe ID of the VNS that uses this WLAN. WLAN can be created but not used in any VNS, in that case alue of zero indicates WLAN has not been used in any VNS. The …
1.3.6.1.4.1.4329.15.3.3.4.4.1.20ColumnwlanRadioManagement11kread-writecurrentWhen this bit is set to enable, the Radio Management (802.11k) feature is enabled on those APs who have this wlan configuration and 802.11k capability.
1.3.6.1.4.1.4329.15.3.3.4.4.1.21ColumnwlanBeaconReportread-writecurrentEnable/disable AP to send out beacon report. This field is configurable only if wlanRadioManagement11k is set to enable(1).
1.3.6.1.4.1.4329.15.3.3.4.4.1.22ColumnwlanQuietIEread-writecurrentEnable/disable AP to advertise a Quiet Element. This field is configurable only if wlanRadioManagement11k is set to enable(1).
1.3.6.1.4.1.4329.15.3.3.4.4.1.23ColumnwlanMirrorNread-writecurrentprohibited(0): Mirroring is prohibited. bothDirection(1) : Both direction packets will be mirrored. rxDirectionOnly(2): Only receive direction packets will be …
1.3.6.1.4.1.4329.15.3.3.4.4.1.24ColumnwlanNetFlowread-writecurrentEnable/disable netflow on this WLAN service.
1.3.6.1.4.1.4329.15.3.3.4.4.1.25ColumnwlanAppVisibilityread-writecurrentEnable/disable both application visibility and control for this WLAN service.
1.3.6.1.4.1.4329.15.3.3.4.5TablewlanStatsTablenot-accessiblecurrentStats related to WLAN (RFS) created on EWC.
1.3.6.1.4.1.4329.15.3.3.4.5.1RowwlanStatsEntrynot-accessiblecurrentAn entery for each existing WLAN on EWC.
1.3.6.1.4.1.4329.15.3.3.4.5.1.1ColumnwlanStatsIDread-onlycurrentUnique internal ID associated with WLAN.
1.3.6.1.4.1.4329.15.3.3.4.5.1.2ColumnwlanStatsAssociatedClientsread-onlycurrentNumber of clients that are currently associated to this WLAN.
1.3.6.1.4.1.4329.15.3.3.4.5.1.3ColumnwlanStatsRadiusTotRequestsread-onlycurrentNumber of requests that were sent to RADIUS servers associated to this WLAN on behalf of MUs' requests using SSID associated to the WLAN for association, authe…
1.3.6.1.4.1.4329.15.3.3.4.5.1.4ColumnwlanStatsRadiusReqFailedread-onlycurrentNumber of requests that were sent to RADIUS servers associated to this WLAN on behalf of MUs' requests for association, authentication or authorization to this…
1.3.6.1.4.1.4329.15.3.3.4.5.1.5ColumnwlanStatsRadiusReqRejectedread-onlycurrentNumber of requests that were sent to RADIUS servers associated to this WLAN on behalf of MUs' requests for association, authentication or authorization to this…
1.3.6.1.4.1.4329.15.3.3.4.6TablewlanPrivTablenot-accessiblecurrentThis table contains configuration of privacy settings for all configured WLAN on EWC. For each of the configured WLAN on the controller one entry is added to t…
1.3.6.1.4.1.4329.15.3.3.4.6.1RowwlanPrivEntrynot-accessiblecurrentAn entry in wlanPrivTable for each configured WLAN on EWC. Each entry is indexed with corresponding wlan ID of wlanTable. The writable fields in this table can…
1.3.6.1.4.1.4329.15.3.3.4.6.1.1ColumnwlanPrivPrivacyTyperead-writecurrentType of privacy applied to the corresponding configured WLAN. Configuration of the other fields in this table depends on the value of this field, e.g. if this …
1.3.6.1.4.1.4329.15.3.3.4.6.1.2ColumnwlanPrivWEPKeyIndexread-writecurrentIndex of configured WEP. This field is required if and only if privacy type is staticWEP(1).
1.3.6.1.4.1.4329.15.3.3.4.6.1.3ColumnwlanPrivWEPKeyLengthread-writecurrentKey legnth for the configured WEP key. This field is required if and only if privacy type is staticWEP(1).
1.3.6.1.4.1.4329.15.3.3.4.6.1.4ColumnwlanPrivWEPKeyread-writecurrentThe configured WEP key length must match the wlanPrivWEPKeyLength field. Any key with length longer or shorter than that length will be rejected. This field is…
1.3.6.1.4.1.4329.15.3.3.4.6.1.5ColumnwlanPrivWPAv1EncryptionTyperead-writecurrentThe type of encryption used for WPA version 1 associations. This OID is undefined unless wlanPrivPrivacyType is wpa (3) or wpaPSK (4) and wlanPrivWPAversion is…
1.3.6.1.4.1.4329.15.3.3.4.6.1.6ColumnwlanPrivWPAv2EncryptionTyperead-writecurrentThe type of encryption used for WPA version 2 associations. This OID is undefined unless wlanPrivPrivacyType is wpa (3) or wpaPSK (4) and wlanPrivWPAversion is…
1.3.6.1.4.1.4329.15.3.3.4.6.1.7ColumnwlanPrivKeyManagementread-writecurrentKey management option available for the WPA2. This field has meaning if privacy type is WPA with WPA2 option enabled. This field can be modified only if wlanPr…
1.3.6.1.4.1.4329.15.3.3.4.6.1.8ColumnwlanPrivBroadcastRekeyingread-writecurrentBroadcast rekeying if this value is set to true. This field can be modified only if wlanPrivPrivacyType is set to wpa(3) or wpaPSK(4).
1.3.6.1.4.1.4329.15.3.3.4.6.1.9ColumnwlanPrivRekeyIntervalread-writecurrentInterval in seconds for requesting rekeying. This field has meaning if privacy type is WPA and broadcast rekeying is enabled (wlanPrivBroadcastRekeying is set …
1.3.6.1.4.1.4329.15.3.3.4.6.1.10ColumnwlanPrivGroupKPSRread-writecurrentGroup Key Power Save Retry (GKPSR) value for the WPA type of privacy. This field can be modified only if wlanPrivPrivacyType is set to wpa(3) or wpaPSK(4).
1.3.6.1.4.1.4329.15.3.3.4.6.1.11ColumnwlanPrivWPAPSKread-writecurrentWPA-PSK shared key. This field has meaning if and only if WLAN privacy type is set to WPA-PSK. Input type can be either HEX formatted string or ASCII string. I…
1.3.6.1.4.1.4329.15.3.3.4.6.1.12ColumnwlanPrivWPAversionread-writecurrentType of wpa version selected. This field can be modified only if wlanPrivPrivacyType is set to wpa(3) or wpaPSK(4). Note: wpa version v1 only is not allowed. 0…
1.3.6.1.4.1.4329.15.3.3.4.6.1.13ColumnwlanPrivfastTransitionread-writecurrentWhen this field is set to enable(1), the 802.11r (fast transition) is enabled. This field can be modified only if wlanPrivPrivacyType is set to wpa(2).
1.3.6.1.4.1.4329.15.3.3.4.6.1.14ColumnwlanPrivManagementFrameProtectionread-writecurrentDisable(0) : The AP will not encrypt any management frames. Enable(1): The AP will encrypt management frames for clients who also support this feature. If the …
1.3.6.1.4.1.4329.15.3.3.4.7TablewlanAuthTablenot-accessiblecurrentThis table contains configuration of authentication settings for all configured WLAN on EWC. For each of the configured WLAN on the controller one entry is add…
1.3.6.1.4.1.4329.15.3.3.4.7.1RowwlanAuthEntrynot-accessiblecurrentAn entry in wlanAuthTable for each configured WLAN on EWC. Each entry is indexed with corresponding wlan ID of wlanTable. The writable fields in this table can…
1.3.6.1.4.1.4329.15.3.3.4.7.1.1ColumnwlanAuthTyperead-writecurrentThe type of authentication applied to stations attempting to associate to a BSSID belonging to this WLAN Service. If the dot1x type is selected, then this WLAN…
1.3.6.1.4.1.4329.15.3.3.4.7.1.2ColumnwlanAuthMacBasedAuthread-writecurrentMAC based authorization is enabled if this field is set to true. When this field set to true, SNMP will auto configure one RADIUS server to enable MAC authoriz…
1.3.6.1.4.1.4329.15.3.3.4.7.1.3ColumnwlanAuthMACBasedAuthOnRoamread-writecurrentIf it is set to true, the client will be forced to go through MAC based authorization when the client roamed. This field has meaning only when wlanAuthMacBased…
1.3.6.1.4.1.4329.15.3.3.4.7.1.4ColumnwlanAuthAutoAuthAuthorizedUserread-writecurrentAll authorized users will be considered authenticated automatically. This field has meaning only when wlanAuthMacBasedAuth is set to true. This field can be mo…
1.3.6.1.4.1.4329.15.3.3.4.7.1.5ColumnwlanAuthAllowUnauthorizedUserread-writecurrentUnauthorized users will be allowed if this field is set to true.This field has meaning only when wlanAuthMacBasedAuth is set to true. This field can be modifie…
1.3.6.1.4.1.4329.15.3.3.4.7.1.6ColumnwlanAuthRadiusIncludeAPread-writecurrentAP serial number will be included in RADIUS request packet as VSA if this field is set to true.
1.3.6.1.4.1.4329.15.3.3.4.7.1.7ColumnwlanAuthRadiusIncludeVNSread-writecurrentVNS name will be included in RADIUS request packet as VSA if this field is set to true.
1.3.6.1.4.1.4329.15.3.3.4.7.1.8ColumnwlanAuthRadiusIncludeSSIDread-writecurrentWLAN SSID will be included in RADIUS request packet as VSA if this field is set to true.
1.3.6.1.4.1.4329.15.3.3.4.7.1.9ColumnwlanAuthRadiusIncludePolicyread-writecurrentPolicy name will be included in RADIUS request packet as VSA if this field is set to true.
1.3.6.1.4.1.4329.15.3.3.4.7.1.10ColumnwlanAuthRadiusIncludeTopologyread-writecurrentTopology name will be included in RADIUS request packet as VSA if this field is set to true.
1.3.6.1.4.1.4329.15.3.3.4.7.1.11ColumnwlanAuthRadiusIncludeIngressRCread-writecurrentIngress rate control name will be included in RADIUS request packet as VSA if this field is set to true.
1.3.6.1.4.1.4329.15.3.3.4.7.1.12ColumnwlanAuthRadiusIncludeEgressRCread-writecurrentEgress rate control name will be included in RADIUS request packet as VSA if this field is set to true.
1.3.6.1.4.1.4329.15.3.3.4.7.1.13ColumnwlanAuthCollectAcctInformationread-writecurrentAccounting information is collected for clients if this field is set to true.
1.3.6.1.4.1.4329.15.3.3.4.7.1.14ColumnwlanAuthReplaceCalledStationIDWithZoneread-writecurrentReplace called station ID with Zone if this field is set to true.
1.3.6.1.4.1.4329.15.3.3.4.7.1.15ColumnwlanAuthRadiusAcctAfterMacBaseAuthorizationread-writecurrentRADIUS accounting begins after MAC-based authorization completes if this field is set to true. This field has meaning only when wlanAuthMacBasedAuth is set to …
1.3.6.1.4.1.4329.15.3.3.4.7.1.16ColumnwlanAuthRadiusTimeoutRoleread-writecurrentApply this role to clients when the RADIUS server timed out. '-1' is treat like access reject. Any other number is the Role ID. This field has meaning only whe…
1.3.6.1.4.1.4329.15.3.3.4.7.1.17ColumnwlanAuthRadiusOperatorNameSpaceread-writecurrentwlanAuthRadiusOperatorNameSpace is the Namespace ID as defined in RFC 5580. The value within this field contains the operator namespace identifier. The Namespa…
1.3.6.1.4.1.4329.15.3.3.4.7.1.18ColumnwlanAuthRadiusOperatorNameread-writecurrentRADIUS accounting message will include this string when the wlanAuthRadiusOperatorNameSpace is not set to -1.
1.3.6.1.4.1.4329.15.3.3.4.7.1.19ColumnwlanAuthMACBasedAuthReAuthOnAreaRoamread-writecurrentIf this field is set to true, the client will be forced to go through MAC based authorization when the client roams to another area. This field has meaning and…
1.3.6.1.4.1.4329.15.3.3.4.8TablewlanRadiusTablenot-accessiblecurrentThis table contains configuration of RADIUS settings for all configured WLAN on EWC. For each of the configured WLAN on the controller there may exist one or m…
1.3.6.1.4.1.4329.15.3.3.4.8.1RowwlanRadiusEntrynot-accessiblecurrentAn entry in wlanRadiusTable for each RADIUS server used by the WLAN indexed by wlanID.
1.3.6.1.4.1.4329.15.3.3.4.8.1.1ColumnwlanRadiusIndexnot-accessiblecurrentInternally generated index and it has no external meaning.
1.3.6.1.4.1.4329.15.3.3.4.8.1.2ColumnwlanRadiusNameread-writecurrentName of the RADIUS server associated to this entry.
1.3.6.1.4.1.4329.15.3.3.4.8.1.3ColumnwlanRadiusUsageread-writecurrentUsage type associated to this entry for authentication.
1.3.6.1.4.1.4329.15.3.3.4.8.1.4ColumnwlanRadiusPriorityread-writecurrentPriority associated to this entry for authentication. RADIUS servers are contacted for authentication requests in the order of their priority defined in this f…
1.3.6.1.4.1.4329.15.3.3.4.8.1.5ColumnwlanRadiusPortread-writecurrentThe RADIUS authentication requests should be sent to this authentication port.
1.3.6.1.4.1.4329.15.3.3.4.8.1.6ColumnwlanRadiusRetriesread-writecurrentMaximum number of retries attempted for an specific authentication request.
1.3.6.1.4.1.4329.15.3.3.4.8.1.7ColumnwlanRadiusTimeoutread-writecurrentNumber of seconds to wait for a response from authentication server for each request sent to the server before considering the request as failure.
1.3.6.1.4.1.4329.15.3.3.4.8.1.8ColumnwlanRadiusNASUseVnsIPread-writecurrentIf this value is set to true, then VNS IP address associated to the WLAN indexed by wlanID to this entry is used as NAS IP address. Otherwise NAS IP address sh…
1.3.6.1.4.1.4329.15.3.3.4.8.1.9ColumnwlanRadiusNASIPread-writecurrentNAS IP associated to this RADIUS server. Configuration of this field is directly affected by the value of wlanRadiusNASUseVnsIP.
1.3.6.1.4.1.4329.15.3.3.4.8.1.10ColumnwlanRadiusNASIDUseVNSNameread-writecurrentIf this value is set to true, then use VNS name associated to the WLAN indexed by wlanID for this entry as NAS ID. Otherwise NAS ID should be configured manual…
1.3.6.1.4.1.4329.15.3.3.4.8.1.11ColumnwlanRadiusNASIDread-writecurrentNAS ID associated to this RADIUS server. Configuration of this field is directly affected by the value of wlanRadiusNASIDUseVNSName.
1.3.6.1.4.1.4329.15.3.3.4.8.1.12ColumnwlanRadiusAuthTyperead-writecurrentAuthentication type used for this WLAN when using this RADIUS server to authenticate users.
1.3.6.1.4.1.4329.15.3.3.4.9TablewlanCPTablenot-accessiblecurrentThis table contains configuration of Captive Portal settings for all configured WLAN on EWC. For each of the configured WLAN on the controller one entry is add…
1.3.6.1.4.1.4329.15.3.3.4.9.1RowwlanCPEntrynot-accessiblecurrentAn entry in wlanCPTable for each configured WLAN on EWC. Each entry is indexed with corresponding wlan ID of wlanTable. The writable fields in this table can b…
1.3.6.1.4.1.4329.15.3.3.4.9.1.1ColumnwlanCPAuthTyperead-writecurrentType of authentication applied to MU requesting association using SSID associated to this WLAN.
1.3.6.1.4.1.4329.15.3.3.4.9.1.2ColumnwlanCP802HttpRedirectread-writecurrentIf it is set to true, then CP will be redirected to configured CP. This value has meaning only for CP of the type 'dot1x(3)'.
1.3.6.1.4.1.4329.15.3.3.4.9.1.3ColumnwlanCPExtConnectionread-writecurrentIP address of the interface for this CP.
1.3.6.1.4.1.4329.15.3.3.4.9.1.4ColumnwlanCPExtPortread-writecurrentThe port associated to the CP IP address.
1.3.6.1.4.1.4329.15.3.3.4.9.1.5ColumnwlanCPExtEnableHttpsread-writecurrentHTTPS support is enabled if this field is set to true.
1.3.6.1.4.1.4329.15.3.3.4.9.1.6ColumnwlanCPExtEncryptionread-writecurrentType of encryption for the CP.
1.3.6.1.4.1.4329.15.3.3.4.9.1.7ColumnwlanCPExtSharedSecretread-writecurrentShared secret used for this captive portal.
1.3.6.1.4.1.4329.15.3.3.4.9.1.8ColumnwlanCPExtTosOverrideread-writecurrentOverride ToS of NAC server usage only.
1.3.6.1.4.1.4329.15.3.3.4.9.1.9ColumnwlanCPExtTosValueread-writedeprecatedToS value for NAC server only.
1.3.6.1.4.1.4329.15.3.3.4.9.1.10ColumnwlanCPExtAddIPtoURLread-writecurrentIf this value is set to true, then add EWC IP address and port number to the redirection URL.
1.3.6.1.4.1.4329.15.3.3.4.9.1.11ColumnwlanCPIntLogoffButtonread-writecurrentIf set to true provide 'Logoff' button to the user in CP page.
1.3.6.1.4.1.4329.15.3.3.4.9.1.12ColumnwlanCPIntStatusCheckButtonread-writecurrentIf set to true provide 'Status Check' button to the user in CP page.
1.3.6.1.4.1.4329.15.3.3.4.9.1.13ColumnwlanCPReplaceIPwithFQDNread-writecurrentReplace CP gateway IP address with FQDN.
1.3.6.1.4.1.4329.15.3.3.4.9.1.14ColumnwlanCPSendLoginToread-writecurrentThis field indicates to what URL the successful login session must be redirected. This field qualifies wlanCPRedirectURL.
1.3.6.1.4.1.4329.15.3.3.4.9.1.15ColumnwlanCPRedirectURLread-writecurrentText string identifying default redirection URL.
1.3.6.1.4.1.4329.15.3.3.4.9.1.16ColumnwlanCPGuestAccLifetimeread-writecurrentThis value indicates for how many days the guest account is valid. Value of zero indicates that there is no limit for the guest account.
1.3.6.1.4.1.4329.15.3.3.4.9.1.17ColumnwlanCPGuestAllowedLifetimeAcctread-writecurrentIf this value is set to true, then guest admin can obtain lifetime account.
1.3.6.1.4.1.4329.15.3.3.4.9.1.18ColumnwlanCPGuestSessionLifetimeread-writecurrentThe guess account session using this CP cannot last longer than this number of hours. Value of zero means there is no limit for the session.
1.3.6.1.4.1.4329.15.3.3.4.9.1.19ColumnwlanCPGuestIDPrefixread-writecurrentThe prefix used for guest portal user ID label.
1.3.6.1.4.1.4329.15.3.3.4.9.1.20ColumnwlanCPGuestMinPassLengthread-writecurrentMinimum password length for the guest user account associated to this WLAN.
1.3.6.1.4.1.4329.15.3.3.4.9.1.21ColumnwlanCPGuestMaxConcurrentSessionread-writecurrentMaximum number of the guest users can use this set of credentials to access this concurrent session.
1.3.6.1.4.1.4329.15.3.3.4.9.1.22ColumnwlanCPUseHTTPSforConnectionread-writecurrentWhen this value set to true, use HTTPS for user connection. It has meaning only when wlanCPAuthType is set to internalCP(2) or easyGuestCP(5) or guestSplash(6)
1.3.6.1.4.1.4329.15.3.3.4.9.1.23ColumnwlanCPIdentityread-writecurrentwlanCPIdentity is used to identify the EWC to the external captive portal server (ECP) and the ECP to the EWC.
1.3.6.1.4.1.4329.15.3.3.4.9.1.24ColumnwlanCPCustomSpecificURLread-writecurrentAfter a user successfully logs in, the user will be redirected to the URL as defined in the wlanCPCustomSpecificURL.
1.3.6.1.4.1.4329.15.3.3.4.9.1.25ColumnwlanCPSelectionOptionread-writecurrentAppend the above parameter(s) to the EWC captive portal redirection URL if one or more of the bits are set.
1.3.6.1.4.1.4329.15.3.3.4.10ScalarwlanUnsecuredWlanCountsread-onlycurrentTotal number of WLAN with security issues. The details of security issues can be found in wlanSecurityReportTable.
1.3.6.1.4.1.4329.15.3.3.4.11TablewlanSecurityReportTablenot-accessiblecurrentThis table contains the weak configuration settings for all configured WLAN on EWC. For each of the configured WLAN on the controller there exist one entry in …
1.3.6.1.4.1.4329.15.3.3.4.11.1RowwlanSecurityReportEntrynot-accessiblecurrentAn entry in wlanSecurityReportTable for each configured WLAN on EWC. Each entry is indexed with corresponding wlan ID of wlanTable.
1.3.6.1.4.1.4329.15.3.3.4.11.1.1ColumnwlanSecurityReportFlagread-onlycurrentValue of secureSetting(2) indicates that WLAN has secure configuration.
1.3.6.1.4.1.4329.15.3.3.4.11.1.2ColumnwlanSecurityReportUnsecureTyperead-onlycurrentbit 0: by setting this bit means this WLAN does not use any kind of encryption bit 1: by setting this bit means this WLAN uses weak WEP encryption bit 2: by se…
1.3.6.1.4.1.4329.15.3.3.4.11.1.3ColumnwlanSecurityReportNotesread-onlycurrentTextual description of any security issues related to the WLAN is reflected in this field.
1.3.6.1.4.1.4329.15.3.3.4.12TablewlanRadiusServerTablenot-accessiblecurrentThis table contains configuration of RADIUS Servers settings for all configured WLANs on the Wireless Controller. For each of the configured WLANs on the contr…
1.3.6.1.4.1.4329.15.3.3.4.12.1RowwlanRadiusServerEntrynot-accessiblecurrentAn entry in wlanRadiusServerTable for each RADIUS server used by the WLAN indexed by wlanID and radiusId. The radiusId is the controller's internal radius serv…
1.3.6.1.4.1.4329.15.3.3.4.12.1.1ColumnradiusIdnot-accessiblecurrentController's internal RADIUS index.
1.3.6.1.4.1.4329.15.3.3.4.12.1.2ColumnwlanRadiusServerNameread-onlycurrentName of the RADIUS server.
1.3.6.1.4.1.4329.15.3.3.4.12.1.3ColumnwlanRadiusServerUseread-writecurrentuse : This means that this WLAN service indexed by wlanID uses this RADIUS server which it is indexed by the radiusId.
1.3.6.1.4.1.4329.15.3.3.4.12.1.4ColumnwlanRadiusServerUsageread-writecurrentbit 0: By setting this bit, this RADIUS server is used for authentication. This bit has meaning only when wlanAuthType is set to internalCP(2), dot1x(3), or ex…
1.3.6.1.4.1.4329.15.3.3.4.12.1.5ColumnwlanRadiusServerAuthUseVNSIPAddrread-writecurrentWhen this value set to true, use the VNS's IP address as NAS IP address during the authentication.
1.3.6.1.4.1.4329.15.3.3.4.12.1.6ColumnwlanRadiusServerAuthNASIPread-writecurrentUse this IP address as the NAS IP addresss during the authentication. The default IP address is the VNS IP address. This field has meaning only when the wlanRa…
1.3.6.1.4.1.4329.15.3.3.4.12.1.7ColumnwlanRadiusServerAuthUseVNSNameread-writecurrentWhen this value set to true, use the VNS's name as the NAS identifier during the authentication.
1.3.6.1.4.1.4329.15.3.3.4.12.1.8ColumnwlanRadiusServerAuthNASIdread-writecurrentUse this name as the NAS identifier during the authentication. The default name is the VNS name. This field has meaning only when the wlanRadiusServerUsage's b…
1.3.6.1.4.1.4329.15.3.3.4.12.1.9ColumnwlanRadiusServerAuthAuthTyperead-writecurrentAuthentication type. This field has meaning only when the wlanRadiusServerUsage's bit 0 is set.
1.3.6.1.4.1.4329.15.3.3.4.12.1.10ColumnwlanRadiusServerAcctUseVNSIPAddrread-writecurrentWhen this value set to true, use the VNS's IP address as NAS IP address during the accounting.
1.3.6.1.4.1.4329.15.3.3.4.12.1.11ColumnwlanRadiusServerAcctNASIPread-writecurrentUse this IP address as the NAS IP addresss during the accounting. The default IP address is the VNS IP address. This field has meaning only when the wlanRadius…
1.3.6.1.4.1.4329.15.3.3.4.12.1.12ColumnwlanRadiusServerAcctUseVNSNameread-writecurrentWhen this value set to true, use the VNS's name as the NAS identifier during the accounting.
1.3.6.1.4.1.4329.15.3.3.4.12.1.13ColumnwlanRadiusServerAcctNASIdread-writecurrentUse this name as the NAS identifier during the accounting. The default name is the VNS name. This field has meaning only when the wlanRadiusServerUsage's bit 2…
1.3.6.1.4.1.4329.15.3.3.4.12.1.14ColumnwlanRadiusServerAcctSIARread-writecurrentIf this value is set to true, then the controller sends interrim accounting records for fast failover events. This field has meaning only when the wlanRadiusSe…
1.3.6.1.4.1.4329.15.3.3.4.12.1.15ColumnwlanRadiusServerMacUseVNSIPAddrread-writecurrentWhen this value set to true, use the VNS's IP address as NAS IP address during the MAC based authentication.
1.3.6.1.4.1.4329.15.3.3.4.12.1.16ColumnwlanRadiusServerMacNASIPread-writecurrentUse this IP address as the NAS IP addresss during the MAC based authentication. The default IP address is the VNS IP address. This field has meaning only when …
1.3.6.1.4.1.4329.15.3.3.4.12.1.17ColumnwlanRadiusServerMacUseVNSNameread-writecurrentWhen this value set to true, use the VNS's name as the NAS identifier during the MAC based authentication.
1.3.6.1.4.1.4329.15.3.3.4.12.1.18ColumnwlanRadiusServerMacNASIdread-writecurrentUse this name as the NAS identifier during the MAC based authentication. The default name is the VNS name. This field has meaning only when the wlanRadiusServe…
1.3.6.1.4.1.4329.15.3.3.4.12.1.19ColumnwlanRadiusServerMacAuthTyperead-writecurrentAuthentication type. This field has meaning only when the wlanRadiusServerUsage's bit 1 is set.
1.3.6.1.4.1.4329.15.3.3.4.12.1.20ColumnwlanRadiusServerMacPWread-writecurrentThe password is used for MAC based authentication. This field has meaning only when the wlanRadiusServerUsage's bit 1 is set.
1.3.6.1.4.1.4329.15.3.4Nodetopology
1.3.6.1.4.1.4329.15.3.4.1NodetopologyConfig
1.3.6.1.4.1.4329.15.3.4.1.1TabletopologyTablenot-accessiblecurrentList of topologies configured on EWC.
1.3.6.1.4.1.4329.15.3.4.1.1.1RowtopologyEntrynot-accessiblecurrentConfiguration information about a topology in topology table. EWC supports different types of topologies, therefore, for complete configuration of a topology n…
1.3.6.1.4.1.4329.15.3.4.1.1.1.1ColumntopologyIDnot-accessiblecurrentUnique internal identifier of the topology. This item is generated internally by EWC and has no external meaning.
1.3.6.1.4.1.4329.15.3.4.1.1.1.2ColumntopologyNameread-writecurrentName associated with topology. This name must be unique within EWC. Allowable characters for this field are from the set of A-Z, a-z, -!#$:, 0-9, and space. Ho…
1.3.6.1.4.1.4329.15.3.4.1.1.1.3ColumntopologyModeread-writecurrentType of this topology. This field implies the meaning and necessity of other attributes associated to the topology.
1.3.6.1.4.1.4329.15.3.4.1.1.1.4ColumntopologyTaggedread-writecurrentIf topology is tagged, then a VLAN ID must be assigned to the topology. Meaning associated to this field is topology specific: - For Admin topology (management…
1.3.6.1.4.1.4329.15.3.4.1.1.1.5ColumntopologyVlanIDread-writecurrentVLAN ID assigned to a tagged topology. For untagged topology this field has no meaning and it is set to -1.
1.3.6.1.4.1.4329.15.3.4.1.1.1.6ColumntopologyEgressPortread-writecurrentEgress port associated to this topology if it is tagged and VLANID defined for the topology. This field is represented as octect string: The most significant b…
1.3.6.1.4.1.4329.15.3.4.1.1.1.7ColumntopologyLayer3read-writecurrentIf set to true, then topology has layer three persence. Any topology with layer three presence must have IP address and gateway assigned to it. Meaning associa…
1.3.6.1.4.1.4329.15.3.4.1.1.1.8ColumntopologyIPAddressread-writecurrentIP address assigned to the topology as its interface. Meaning associated to this field is topology specific: - This field has meaning if topology has layer thr…
1.3.6.1.4.1.4329.15.3.4.1.1.1.9ColumntopologyIPMaskread-writecurrentMask for topology's IP address. This field is only applicable to those topologies that have IP address assigned to them, otherwise it is set either to 255.255.…
1.3.6.1.4.1.4329.15.3.4.1.1.1.10ColumntopologyMTUsizeread-writecurrentDefault MTU size for the topology. This field is only configurable for a topologies that has layer three presence.
1.3.6.1.4.1.4329.15.3.4.1.1.1.11ColumntopologyGatewayread-writecurrentGateway associated to this topology. This field has meaning for a topology that has layer three presence.
1.3.6.1.4.1.4329.15.3.4.1.1.1.12ColumntopologyDHCPUsageread-writecurrentThe type of DHCP to be used for IP address assignment to associated MU. This field has meaning only if the topology has layer three persense. Meaning associate…
1.3.6.1.4.1.4329.15.3.4.1.1.1.13ColumntopologyAPRegistrationread-writecurrentIf set to true, then AP registration can be achieved using via this topology. Meaning associated to this field is topology specific: - Always false for Admin (…
1.3.6.1.4.1.4329.15.3.4.1.1.1.14ColumntopologyManagementTrafficread-writecurrentIf set to true, then management data traffic is allowed on this topology. Meaning associated to this field is topology specific: - Always true for Admin topolo…
1.3.6.1.4.1.4329.15.3.4.1.1.1.15ColumntopologySynchronizeread-writecurrentIf set to true, then topology must be synchronized with peer controller in availability mode operation. Meaning associated to this field is topology specific: …
1.3.6.1.4.1.4329.15.3.4.1.1.1.16ColumntopologySyncGatewayread-writecurrentGateway associated to synchronized topology. This field has meaning for those topologies that their topologySynchornize field is set to true.
1.3.6.1.4.1.4329.15.3.4.1.1.1.17ColumntopologySyncMaskread-writecurrentMask of synchronized gateway IP address. This field has meaning for those topologies that their topologySynchornize field is set to true.
1.3.6.1.4.1.4329.15.3.4.1.1.1.18ColumntopologySyncIPStartread-writecurrentRange of IP addresses assigned to remote synchronized topology. This IP address represents starting IP address. This field has meaning for those topologies tha…
1.3.6.1.4.1.4329.15.3.4.1.1.1.19ColumntopologySyncIPEndread-writecurrentRange of IP addresses assigned to remote synchronized topology. This IP address represents ending IP address. This field has meaning for those topologies that …
1.3.6.1.4.1.4329.15.3.4.1.1.1.20ColumntopologyStaticIPv6Addressread-writecurrentStatically configured IPv6 address assigned to the admin port.
1.3.6.1.4.1.4329.15.3.4.1.1.1.21ColumntopologyLinkLocalIPv6Addressread-onlycurrentAutomatically generated link-local IPv6 address assigned to the admin port.
1.3.6.1.4.1.4329.15.3.4.1.1.1.22ColumntopologyPreFixLengthread-writecurrentThe prfix length of the statically configured IPv6 address of the topology.
1.3.6.1.4.1.4329.15.3.4.1.1.1.23ColumntopologyIPv6Gatewayread-writecurrentThe gateway of IPv6 address that is associated to the admin topology.
1.3.6.1.4.1.4329.15.3.4.1.1.1.24ColumntopologyDynamicEgressread-writecurrentEnable/disable dynamic egress for this topology. Dynamic egress allows a station to receive from this VLAN if it can send to this VLAN.
1.3.6.1.4.1.4329.15.3.4.1.1.1.25ColumntopologyIsGroupread-writecurrentWhen this flag is yes, this means the topology is created as a group topology.
1.3.6.1.4.1.4329.15.3.4.1.1.1.26ColumntopologyGroupMembersread-writecurrentThis field specifies the topologies for this group. This field has meaning only when topologyIsGroup is set to 1. This field is represented as octect string. T…
1.3.6.1.4.1.4329.15.3.4.1.1.1.27ColumntopologyMemberIdread-writecurrent-1 : Means this topology is not a member of a group topology. valid topology ID : Means this topology is a member of a configured group topology that has this …
1.3.6.1.4.1.4329.15.3.4.2NodetopologyStat
1.3.6.1.4.1.4329.15.3.4.2.1TabletopoStatTablenot-accessiblecurrentStatistics describing traffic transmitted or received for a single topology. This is the traffic on the topology that is coming from or going to destinations o…
1.3.6.1.4.1.4329.15.3.4.2.1.1RowtopoStatEntrynot-accessiblecurrentStatistic related an entry in topology table.
1.3.6.1.4.1.4329.15.3.4.2.1.1.1ColumntopoStatNameread-onlycurrentTopology name.
1.3.6.1.4.1.4329.15.3.4.2.1.1.2ColumntopoStatTxPktsread-onlycurrentNumber of packets transmitted to the wired network on the topology/vlan.
1.3.6.1.4.1.4329.15.3.4.2.1.1.3ColumntopoStatRxPktsread-onlycurrentNumber of packets received from the wired network on the topology/vlan.
1.3.6.1.4.1.4329.15.3.4.2.1.1.4ColumntopoStatTxOctetsread-onlycurrentNumber of octets transmitted in frames to the wired network on the topology/vlan.
1.3.6.1.4.1.4329.15.3.4.2.1.1.5ColumntopoStatRxOctetsread-onlycurrentNumber of octets received in frames from the wired network on the topology/vlan.
1.3.6.1.4.1.4329.15.3.4.2.1.1.6ColumntopoStatMulticastTxPktsread-onlycurrentNumber of multicast frames transmitted to the wired network on the topology/vlan.
1.3.6.1.4.1.4329.15.3.4.2.1.1.7ColumntopoStatMulticastRxPktsread-onlycurrentNumber of multicast frames received from the wired network on the topology/vlan.
1.3.6.1.4.1.4329.15.3.4.2.1.1.8ColumntopoStatBroadcastTxPktsread-onlycurrentNumber of broadcast frames transmitted to the wired network on the topology/vlan.
1.3.6.1.4.1.4329.15.3.4.2.1.1.9ColumntopoStatBroadcastRxPktsread-onlycurrentNumber of broadcast frames received from the wired network on the topology/vlan.
1.3.6.1.4.1.4329.15.3.4.2.1.1.10ColumntopoStatFrameChkSeqErrorsread-onlycurrentNumber of frames with checksum errors received from the wired network on the topology/vlan.
1.3.6.1.4.1.4329.15.3.4.2.1.1.11ColumntopoStatFrameTooLongErrorsread-onlycurrentNumber of oversized frames received from the wired network on the topology/vlan.
1.3.6.1.4.1.4329.15.3.4.2.2TabletopoExceptionStatTablenot-accessiblecurrentThe table contains list of exception-specific filters statistics for configured topologies in EWC.
1.3.6.1.4.1.4329.15.3.4.2.2.1RowtopoExceptionStatEntrynot-accessiblecurrentAn entry in topology exception statistic table.
1.3.6.1.4.1.4329.15.3.4.2.2.1.1ColumntopoExceptionFiterNameread-writecurrentException filter name.
1.3.6.1.4.1.4329.15.3.4.2.2.1.2ColumntopoExceptionStatPktsDeniedread-onlycurrentNumber of packets that were denied by defined filters since device's last restart.
1.3.6.1.4.1.4329.15.3.4.2.2.1.3ColumntopoExceptionStatPktsAllowedread-onlycurrentNumber packets that were allowed by defined filters since device's last restart.
1.3.6.1.4.1.4329.15.3.4.2.3TabletopoWireStatTablenot-accessibledeprecatedThe table contains statistics describing traffic transmitted or received unencapsulated (i.e. not wrapped in WASSP) for each topology
1.3.6.1.4.1.4329.15.3.4.2.3.1RowtopoWireStatEntrynot-accessibledeprecatedStatistics describing traffic transmitted or received unencapsulated (i.e. not wrapped in WASSP) for a single topology. This is the traffic on the topology tha…
1.3.6.1.4.1.4329.15.3.4.2.3.1.1ColumntopoWireStatNameread-onlydeprecatedTopology name.
1.3.6.1.4.1.4329.15.3.4.2.3.1.2ColumntopoWireStatTxPktsread-onlydeprecatedNumber of packets transmitted unencapsulated to the wired network on the topology/vlan.
1.3.6.1.4.1.4329.15.3.4.2.3.1.3ColumntopoWireStatRxPktsread-onlydeprecatedNumber of packets received unencapsulated from the wired network on the topology/vlan.
1.3.6.1.4.1.4329.15.3.4.2.3.1.4ColumntopoWireStatTxOctetsread-onlydeprecatedNumber of octets transmitted in unencapsulated frames to the wired network on the topology/vlan.
1.3.6.1.4.1.4329.15.3.4.2.3.1.5ColumntopoWireStatRxOctetsread-onlydeprecatedNumber of octets received in unencapsulated frames to the wired network on the topology/vlan.
1.3.6.1.4.1.4329.15.3.4.2.3.1.6ColumntopoWireStatMulticastTxPktsread-onlydeprecatedNumber of multicast frames transmitted unencapsulated to the wired network on the topology/vlan.
1.3.6.1.4.1.4329.15.3.4.2.3.1.7ColumntopoWireStatMulticastRxPktsread-onlydeprecatedNumber of multicast frames received unencapsulated from the wired network on the topology/vlan.
1.3.6.1.4.1.4329.15.3.4.2.3.1.8ColumntopoWireStatBroadcastTxPktsread-onlydeprecatedNumber of broadcast frames transmitted unencapsulated to the wired network on the topology/vlan.
1.3.6.1.4.1.4329.15.3.4.2.3.1.9ColumntopoWireStatBroadcastRxPktsread-onlydeprecatedNumber of broadcast frames received unencapsulated from the wired network on the topology/vlan.
1.3.6.1.4.1.4329.15.3.4.2.3.1.10ColumntopoWireStatFrameChkSeqErrorsread-onlydeprecatedNumber of unencapsulated frames with checksum errors received from the wired network on the topology/vlan.
1.3.6.1.4.1.4329.15.3.4.2.3.1.11ColumntopoWireStatFrameTooLongErrorsread-onlydeprecatedNumber of unencapsulated frames with length longer than permitted received from the wired network on the topology/vlan.
1.3.6.1.4.1.4329.15.3.4.2.4TabletopoCompleteStatTablenot-accessiblecurrentThe table contains statistics describing traffic transmitted and received for each topology on both the wired side and the wireless side.
1.3.6.1.4.1.4329.15.3.4.2.4.1RowtopoCompleteStatEntrynot-accessiblecurrentStatistics describing traffic transmitted and received on a single topology on both the wired side and the wireless side.
1.3.6.1.4.1.4329.15.3.4.2.4.1.1ColumntopoCompleteStatNameread-onlycurrentTopology name.
1.3.6.1.4.1.4329.15.3.4.2.4.1.2ColumntopoCompleteStatTxPktsread-onlycurrentNumber of packets transmitted to the wired and wireless networks on the topology/vlan.
1.3.6.1.4.1.4329.15.3.4.2.4.1.3ColumntopoCompleteStatRxPktsread-onlycurrentNumber of packets received from the wired and wireless networks on the topology/vlan.
1.3.6.1.4.1.4329.15.3.4.2.4.1.4ColumntopoCompleteStatTxOctetsread-onlycurrentNumber of octets transmitted in frames to the wired and wireless networks on the topology/vlan.
1.3.6.1.4.1.4329.15.3.4.2.4.1.5ColumntopoCompleteStatRxOctetsread-onlycurrentNumber of octets received in frames from the wired and wireless networks on the topology/vlan.
1.3.6.1.4.1.4329.15.3.4.2.4.1.6ColumntopoCompleteStatMulticastTxPktsread-onlycurrentNumber of multicast frames transmitted to the wired and wireless networks on the topology/vlan.
1.3.6.1.4.1.4329.15.3.4.2.4.1.7ColumntopoCompleteStatMulticastRxPktsread-onlycurrentNumber of multicast frames received from the wired and wireless networks on the topology/vlan.
1.3.6.1.4.1.4329.15.3.4.2.4.1.8ColumntopoCompleteStatBroadcastTxPktsread-onlycurrentNumber of broadcast frames transmitted to the wired and wireless networks on the topology/vlan.
1.3.6.1.4.1.4329.15.3.4.2.4.1.9ColumntopoCompleteStatBroadcastRxPktsread-onlycurrentNumber of broadcast frames received from the wired and wireless networks on the topology/vlan.
1.3.6.1.4.1.4329.15.3.4.2.4.1.10ColumntopoCompleteStatFrameChkSeqErrorsread-onlycurrentNumber of frames with checksum errors received from the wired and wireless networks on the topology/vlan.
1.3.6.1.4.1.4329.15.3.4.2.4.1.11ColumntopoCompleteStatFrameTooLongErrorsread-onlycurrentNumber of oversized frames received from the wired and wireless networks on the topology/vlan.
1.3.6.1.4.1.4329.15.3.5NodeaccessPoints
1.3.6.1.4.1.4329.15.3.5.1NodeapConfigObjects
1.3.6.1.4.1.4329.15.3.5.1.1ScalarapCountread-onlycurrentThe count of currently configured AccessPoints associated with this WirelessController.
1.3.6.1.4.1.4329.15.3.5.1.2TableapTablenot-accessiblecurrentContains a list of all configured APs associated with the Wireless Controller.
1.3.6.1.4.1.4329.15.3.5.1.2.1RowapEntrynot-accessiblecurrentConfiguration information for an access point.
1.3.6.1.4.1.4329.15.3.5.1.2.1.1ColumnapIndexread-writecurrentTable index for the access point.
1.3.6.1.4.1.4329.15.3.5.1.2.1.2ColumnapNameread-writecurrentAccess Point's name.
1.3.6.1.4.1.4329.15.3.5.1.2.1.3ColumnapDescread-writecurrentText description of the AP.
1.3.6.1.4.1.4329.15.3.5.1.2.1.4ColumnapSerialNumberread-onlycurrent16-character serial number of the AccessPoint.
1.3.6.1.4.1.4329.15.3.5.1.2.1.5ColumnapPortifIndexread-writecurrentifIndex of the physical port to which this AP is assigned.
1.3.6.1.4.1.4329.15.3.5.1.2.1.6ColumnapWiredIfIndexread-writecurrentifIndex of the wired interface on the AP.
1.3.6.1.4.1.4329.15.3.5.1.2.1.7ColumnapSoftwareVersionread-onlycurrentSoftware version currently installed on the AP.
1.3.6.1.4.1.4329.15.3.5.1.2.1.8ColumnapSpecificread-onlycurrentA link back to the OID under the hiPathWirelessProducts branch that identifies the specific version of this AP.
1.3.6.1.4.1.4329.15.3.5.1.2.1.9ColumnapBroadcastDisassociateread-writecurrentTrue indicates that the AP should broadcast disassociation requests, False indicates unicast.
1.3.6.1.4.1.4329.15.3.5.1.2.1.10ColumnapRowStatusread-writecurrentRowStatus for the apTable.
1.3.6.1.4.1.4329.15.3.5.1.2.1.11ColumnapVlanIDread-writecurrentVLAN tag for the packets trasmitted to/from Access Point. Value ranges: (-1) it is not tagged, zero(0) means reserved, 1-4094 tag value.
1.3.6.1.4.1.4329.15.3.5.1.2.1.12ColumnapIpAssignmentTyperead-writecurrentIP address assignment type, dhcp(1) = uses DHCP to obtain IP address, static(2) = static IP address is assigned to the access point.
1.3.6.1.4.1.4329.15.3.5.1.2.1.13ColumnapIfMACread-onlycurrentAcess Point's wired interface MAC address.
1.3.6.1.4.1.4329.15.3.5.1.2.1.14ColumnapIPAddressread-writecurrentAccess Point's wired interface IP address.
1.3.6.1.4.1.4329.15.3.5.1.2.1.17ColumnapHwVersionread-writecurrentText description of Access Point's hardware version.
1.3.6.1.4.1.4329.15.3.5.1.2.1.18ColumnapSwVersionread-writecurrentText description of Access Point's major software version.
1.3.6.1.4.1.4329.15.3.5.1.2.1.19ColumnapEnvironmentread-writecurrentAccess Point's environment.
1.3.6.1.4.1.4329.15.3.5.1.2.1.20ColumnapHomeread-writecurrentLocal session is created when access point registers directly with the controller. Foreign session is mirrored session created via availability feature.
1.3.6.1.4.1.4329.15.3.5.1.2.1.21ColumnapRoleread-writecurrentIndicates whether Access Point is a traffic fordwarder, sensor or guardian
1.3.6.1.4.1.4329.15.3.5.1.2.1.22ColumnapStateread-writecurrentActive means that access point has registered with this controller at some point of time and still has active connection with this controller. This variable ha…
1.3.6.1.4.1.4329.15.3.5.1.2.1.23ColumnapStatusread-writecurrentRegistration state for the access point at the time of query, approved(1) means the registration was completed, pending(2) means access point has registered bu…
1.3.6.1.4.1.4329.15.3.5.1.2.1.24ColumnapPollTimeoutread-writecurrentDuration after which the access point's connection to controller is considered has been lost if polling fails.
1.3.6.1.4.1.4329.15.3.5.1.2.1.25ColumnapPollIntervalread-writecurrentInterval between each poll sent to the controller.
1.3.6.1.4.1.4329.15.3.5.1.2.1.26ColumnapTelnetAccessread-writecurrentIndicates whether telnet access is enabled/disabled. This value only applys to AP26xx, W788, W786 and AP4102x APs. 1 : Enabled. 2 : Disabled. 3 : Telnet is not…
1.3.6.1.4.1.4329.15.3.5.1.2.1.27ColumnapMaintainClientSessionread-writecurrentIf true, Access Point maintains client's session in the event of poll failure.
1.3.6.1.4.1.4329.15.3.5.1.2.1.28ColumnapRestartServiceContAbsentread-writecurrentIf true, Access Point restarts the service in the absence of controller.
1.3.6.1.4.1.4329.15.3.5.1.2.1.29ColumnapHostnameread-onlycurrentHostname assigned to Access Point.
1.3.6.1.4.1.4329.15.3.5.1.2.1.30ColumnapLocationread-writecurrentText identifying location of the access point.
1.3.6.1.4.1.4329.15.3.5.1.2.1.31ColumnapStaticMTUsizeread-writecurrentConfigured MTU size for the access point. Access point will use the lower value of MTU size between statically configured MTU size and dynamically learned MTU …
1.3.6.1.4.1.4329.15.3.5.1.2.1.32ColumnapSiteIDread-writecurrentThe site ID, as defined in siteTable, that this AP is member of. The value of -1 indicates that AP is not member of any site.
1.3.6.1.4.1.4329.15.3.5.1.2.1.33ColumnapZoneread-writecurrentThe Zone to which the Access Point belongs.
1.3.6.1.4.1.4329.15.3.5.1.2.1.34ColumnapLLDPread-writecurrentEnable or disable broadcasting of LLDP information by the wireless AP.
1.3.6.1.4.1.4329.15.3.5.1.2.1.35ColumnapSSHAccessread-writedeprecatedEnable or Disable SSH access to the Wireless AP. This value only applys to AP36xx, AP37xx, W788C and W786C APs.
1.3.6.1.4.1.4329.15.3.5.1.2.1.36ColumnapLEDModeread-writecurrentLED status field for the Access Point. off(0): LED is set to off for the AP. wdsSignalStrength(1): LED conveys the strength of the singal, for the details plea…
1.3.6.1.4.1.4329.15.3.5.1.2.1.37ColumnapLocationbasedServiceread-writecurrentEnable or disable the AeroScout or Ekahau location-based service for the Wireless AP.
1.3.6.1.4.1.4329.15.3.5.1.2.1.38ColumnapSecureTunnelread-writecurrentEnable or disable Secure Tunnel between Ap and Controller
1.3.6.1.4.1.4329.15.3.5.1.2.1.39ColumnapEncryptCntTrafficread-writecurrentEnable or disable encrypt of control traffic between AP & Controller. This value has meaning only if apSecureTunnel is enabled.
1.3.6.1.4.1.4329.15.3.5.1.2.1.40ColumnapMICErrorWarningread-writecurrentEnable or disable MIC error warning generation.
1.3.6.1.4.1.4329.15.3.5.1.2.1.41ColumnapSecureDataTunnelTyperead-writecurrentsecure data tunnel status between controller and acesss point. disable(0): disable encryption of control and data traffic between AP & Controller. encryptContr…
1.3.6.1.4.1.4329.15.3.5.1.2.1.42ColumnapIPMulticastAssemblyread-writecurrentEnable or disable fragmentation/reassembly of the IP Multicast frames transmitted over the tunnel between AP and Controller. When set to true, an IP Multicast …
1.3.6.1.4.1.4329.15.3.5.1.2.1.43ColumnapSSHConnectionread-writecurrentEnable or Disable SSH access to the Wireless AP. This value only applys to AP36xx, AP37xx, W788C and W786C APs. 1 : Enabled. 2 : Disabled. 3 : SSH is not suppo…
1.3.6.1.4.1.4329.15.3.5.1.3TableapRadioTablenot-accessiblecurrentTable access point radio configuration information.
1.3.6.1.4.1.4329.15.3.5.1.3.1RowapRadioEntrynot-accessiblecurrentConfiguration information for a radio on the access point.
1.3.6.1.4.1.4329.15.3.5.1.3.1.1ColumnapRadioFrequencyread-onlycurrentThe frequency of the radio as supported by the hardware. Supported frequencies are either of 2.5Ghz or 5.0Ghz.
1.3.6.1.4.1.4329.15.3.5.1.3.1.2ColumnapRadioNumberread-onlycurrentAccess point radios are numbered from 1 in increasing order. This numbering is limited in the context of AP. This field returns the radio number of the AP inde…
1.3.6.1.4.1.4329.15.3.5.1.3.1.3ColumnapRadioTyperead-writedeprecatedIndicates the type of radio (a, a/n, a/c, n-strict, c-strict, b, g, b/g, or b/g/n) as it is configured.
1.3.6.1.4.1.4329.15.3.5.1.3.1.4ColumnapRadioProtocolread-writecurrentEnumerates the possible types of 802.11 radio protocols.
1.3.6.1.4.1.4329.15.3.5.1.4TableradioVNSTablenot-accessiblecurrentTable of VNSs the radio is participating in.
1.3.6.1.4.1.4329.15.3.5.1.4.1RowradioVNSEntrynot-accessiblecurrentInformation for a single VNS entry.
1.3.6.1.4.1.4329.15.3.5.1.4.1.1ColumnradioIfIndexread-writecurrentRadio participating in the VNS.
1.3.6.1.4.1.4329.15.3.5.1.4.1.2ColumnvnsIfIndexread-writecurrentifIndex for the VNS the radio is participating.
1.3.6.1.4.1.4329.15.3.5.1.4.1.3ColumnradioVNSRowStatusread-writecurrentRowStatus for the radioVNSTable.
1.3.6.1.4.1.4329.15.3.5.1.5ScalarapFastFailoverEnableread-writecurrentTrue indicates that Fast Failover feature is enabled at AP.
1.3.6.1.4.1.4329.15.3.5.1.6ScalarapLinkTimeoutread-writecurrentTime to deteck link failure. The value is in 1-30 seconds.
1.3.6.1.4.1.4329.15.3.5.1.7TableapAntennaTablenot-accessiblecurrentContains a list of antennas configured for each AP associated with the Wireless Controller. All elements in this table are predefined and read-only.
1.3.6.1.4.1.4329.15.3.5.1.7.1RowapAntennaEntrynot-accessiblecurrentAn entry in this table identifying attributes of one antenna for an AP.
1.3.6.1.4.1.4329.15.3.5.1.7.1.1ColumnapAntennaIndexnot-accessiblecurrentIndex of an antenna inside an AP.
1.3.6.1.4.1.4329.15.3.5.1.7.1.2ColumnapAntennanNameread-onlycurrentTextual description identifying the antenna.
1.3.6.1.4.1.4329.15.3.5.1.7.1.3ColumnapAntennaTyperead-writecurrentTextual description of antenna type selected for that antenna.
1.3.6.1.4.1.4329.15.3.5.1.8TableapRadioAntennaTablenot-accessiblecurrentContains a list of Radio configured for each AP associated with the Wireless Controller. All elements in this table are predefined and read-only.
1.3.6.1.4.1.4329.15.3.5.1.8.1RowapRadioAntennaEntrynot-accessiblecurrentAn entry in this table identifying attributes of one radio for an AP.
1.3.6.1.4.1.4329.15.3.5.1.8.1.3ColumnapRadioAntennaTyperead-onlycurrentTextual description of antenna type selected for that radio.
1.3.6.1.4.1.4329.15.3.5.1.8.1.4ColumnapRadioAntennaModelread-onlycurrentAntenna type. 0 indicates internal antenna. 1 indicates no antenna. Other value indicates specific external antenna type.
1.3.6.1.4.1.4329.15.3.5.1.8.1.5ColumnapRadioAttenuationread-writecurrentCumulative attenuation (in dB) of all components (cables, attenuators) between the radio port and the antenna. A professional installer must configure this val…
1.3.6.1.4.1.4329.15.3.5.2NodeapStatsObjects
1.3.6.1.4.1.4329.15.3.5.2.1ScalarapActiveCountread-onlycurrentThe count of active AccessPoints associated with this WirelessController.
1.3.6.1.4.1.4329.15.3.5.2.2TableapStatsTablenot-accessiblecurrentTable of statistics for the access points.
1.3.6.1.4.1.4329.15.3.5.2.2.1RowapStatsEntrynot-accessiblecurrentStatistics for an access point.
1.3.6.1.4.1.4329.15.3.5.2.2.1.1ColumnapInUcastPktsread-onlycurrentNumber of unicast packets from wireless-to-wired network.
1.3.6.1.4.1.4329.15.3.5.2.2.1.2ColumnapInNUcastPktsread-onlycurrentNumber of non-unicast packets from wireless-to-wired network.
1.3.6.1.4.1.4329.15.3.5.2.2.1.3ColumnapInOctetsread-onlycurrentNumber of octets from wireless-to-wired network.
1.3.6.1.4.1.4329.15.3.5.2.2.1.4ColumnapInErrorsread-onlycurrentNumber of error packets from wireless-to-wired network.
1.3.6.1.4.1.4329.15.3.5.2.2.1.5ColumnapInDiscardsread-onlycurrentNumber of discarded packets from wireless-to-wired network.
1.3.6.1.4.1.4329.15.3.5.2.2.1.6ColumnapOutUcastPktsread-onlycurrentNumber of unicast packets from wired-to-wireless network.
1.3.6.1.4.1.4329.15.3.5.2.2.1.7ColumnapOutNUcastPktsread-onlycurrentNumber of non-unicast packets from wired-to-wireless network.
1.3.6.1.4.1.4329.15.3.5.2.2.1.8ColumnapOutOctetsread-onlycurrentNumber of octets from wired-to-wireless network.
1.3.6.1.4.1.4329.15.3.5.2.2.1.9ColumnapOutErrorsread-onlycurrentNumber of error packets from wired-to-wireless network.
1.3.6.1.4.1.4329.15.3.5.2.2.1.10ColumnapOutDiscardsread-onlycurrentNumber of discarded packets from wired-to-wireless network.
1.3.6.1.4.1.4329.15.3.5.2.2.1.11ColumnapUpTimeread-onlycurrentThe time (in hundredths of a second) since the management portion of the access point was last re-initialized.
1.3.6.1.4.1.4329.15.3.5.2.2.1.12ColumnapCredentialTyperead-onlycurrentSupported certificate type used by AP for commnuication. none(0) = not supported, TLS(1) = Trasport Layer Security (TLS), PEAP(2) = Protected Extensible Authen…
1.3.6.1.4.1.4329.15.3.5.2.2.1.13ColumnapCertificateExpiryread-onlycurrentThe number of timeticks from January, 1st, 1970 to the date when the certificate expires (issued certificate no longer is valid).
1.3.6.1.4.1.4329.15.3.5.2.2.1.14ColumnapStatsMuCountsread-onlycurrentNumber of MUs currently associated with this AP.
1.3.6.1.4.1.4329.15.3.5.2.2.1.15ColumnapStatsSessionDurationread-onlycurrentElapse time since the access point's session has started.
1.3.6.1.4.1.4329.15.3.5.2.2.1.16ColumnapTotalStationsAread-onlycurrentNumber of MUs that are currently associated to this AP using dot11 connection mode 'a'.
1.3.6.1.4.1.4329.15.3.5.2.2.1.17ColumnapTotalStationsBread-onlycurrentNumber of MUs that are currently associated to this AP using dot11 connection mode 'b'.
1.3.6.1.4.1.4329.15.3.5.2.2.1.18ColumnapTotalStationsGread-onlycurrentNumber of MUs that are currently associated to this AP using dot11 connection mode 'g'.
1.3.6.1.4.1.4329.15.3.5.2.2.1.19ColumnapTotalStationsN50read-onlycurrentNumber of MUs that are currently associated to this AP using dot11 connection mode 'n 5.0 Ghz'.
1.3.6.1.4.1.4329.15.3.5.2.2.1.20ColumnapTotalStationsN24read-onlycurrentNumber of MUs that are currently associated to this AP using dot11 connection mode 'n 2.4 Ghz'.
1.3.6.1.4.1.4329.15.3.5.2.2.1.21ColumnapInvalidPolicyCountread-onlycurrentNumber of invalid role has been assigned to the AP
1.3.6.1.4.1.4329.15.3.5.2.2.1.22ColumnapInterfaceMTUread-onlycurrentThe AP's configured ethernet interface MTU size in bytes.
1.3.6.1.4.1.4329.15.3.5.2.2.1.23ColumnapEffectiveTunnelMTUread-onlycurrentThe AP Effective Tunnel MTU determines the maximum length of the frames that can be tunnelled without fragmentation, after subtracting the tunnel headers (WASS…
1.3.6.1.4.1.4329.15.3.5.2.2.1.24ColumnapTotalStationsACread-onlycurrentNumber of MUs that are currently associated to this AP using dot11ac connection mode.
1.3.6.1.4.1.4329.15.3.5.2.2.1.25ColumnapTotalStationsAInOctetsread-onlycurrentNumber of octets from client to AP for clients using protocol 802.11a.
1.3.6.1.4.1.4329.15.3.5.2.2.1.26ColumnapTotalStationsAOutOctetsread-onlycurrentNumber of octets from AP to client for clients using protocol 802.11a.
1.3.6.1.4.1.4329.15.3.5.2.2.1.27ColumnapTotalStationsBInOctetsread-onlycurrentNumber of octets from client to AP for clients using protocol 802.11b.
1.3.6.1.4.1.4329.15.3.5.2.2.1.28ColumnapTotalStationsBOutOctetsread-onlycurrentNumber of octets from AP to client for clients using protocol 802.11b.
1.3.6.1.4.1.4329.15.3.5.2.2.1.29ColumnapTotalStationsGInOctetsread-onlycurrentNumber of octets from client to AP for clients using protocol 802.11g.
1.3.6.1.4.1.4329.15.3.5.2.2.1.30ColumnapTotalStationsGOutOctetsread-onlycurrentNumber of octets from AP to client for clients using protocol 802.11g.
1.3.6.1.4.1.4329.15.3.5.2.2.1.31ColumnapTotalStationsN50InOctetsread-onlycurrentNumber of octets from client to AP for clients using protocol 802.11n (5Ghz).
1.3.6.1.4.1.4329.15.3.5.2.2.1.32ColumnapTotalStationsN50OutOctetsread-onlycurrentNumber of octets from AP to client for clients using protocol 802.11n (5Ghz).
1.3.6.1.4.1.4329.15.3.5.2.2.1.33ColumnapTotalStationsN24InOctetsread-onlycurrentNumber of octets from client to AP for clients using protocol 802.11n (2.4Ghz).
1.3.6.1.4.1.4329.15.3.5.2.2.1.34ColumnapTotalStationsN24OutOctetsread-onlycurrentNumber of octets from AP to client for clients using protocol 802.11n (2.4Ghz).
1.3.6.1.4.1.4329.15.3.5.2.2.1.35ColumnapTotalStationsACInOctetsread-onlycurrentNumber of octets from client to AP for clients using protocol 802.11ac.
1.3.6.1.4.1.4329.15.3.5.2.2.1.36ColumnapTotalStationsACOutOctetsread-onlycurrentNumber of octets from AP to client for clients using protocol 802.11ac.
1.3.6.1.4.1.4329.15.3.5.2.3ScalarapRegistrationRequestsread-onlycurrentTotal registration request have been received by all access points since last reboot.
1.3.6.1.4.1.4329.15.3.5.2.4TableapRadioStatusTablenot-accessiblecurrentTable of radio configuration attributes that the AP can change dynamically. It contains one entry for each radio of each active AP.
1.3.6.1.4.1.4329.15.3.5.2.4.1RowapRadioStatusEntrynot-accessiblecurrentThe configuration attributes of one AP radio that the AP can change dynamically.
1.3.6.1.4.1.4329.15.3.5.2.4.1.1ColumnapRadioStatusChannelread-onlycurrentThe lowest 20 MHz channel of the 20/40/80 MHz wide channel on which the radio is operating. This can be different from the administratively configured channel …
1.3.6.1.4.1.4329.15.3.5.2.4.1.2ColumnapRadioStatusChannelWidthread-onlycurrentMaximum width of the channel being served by the AP's radio. The AP may select a different channel width from the administratively configured width in order to…
1.3.6.1.4.1.4329.15.3.5.2.4.1.3ColumnapRadioStatusChannelOffsetread-onlycurrentThis is the offset (in 20 MHz channels) of the primary channel from the lowest 20 MHz channel within an aggregated channel. The offset can be 0 if the primary …
1.3.6.1.4.1.4329.15.3.5.2.5TableapPerformanceReportByRadioTablenot-accessiblecurrentTable of AP performance statistics by radio that the AP can change dynamically. It contains one entry for each radio of each active AP.
1.3.6.1.4.1.4329.15.3.5.2.5.1RowapPerformanceReportByRadioEntrynot-accessiblecurrentThe AP radio performance statistics of one AP radio.
1.3.6.1.4.1.4329.15.3.5.2.5.1.1ColumnapRadioIndexnot-accessiblecurrentIndex of an radio inside an AP.
1.3.6.1.4.1.4329.15.3.5.2.5.1.2ColumnapPerfRadioPrevPeakChannelUtilizationread-onlycurrentPeak channel utilization in % from last 15 minute interval.
1.3.6.1.4.1.4329.15.3.5.2.5.1.3ColumnapPerfRadioCurPeakChannelUtilizationread-onlycurrentPeak channel utilization in % of current 15 minute interval.
1.3.6.1.4.1.4329.15.3.5.2.5.1.4ColumnapPerfRadioAverageChannelUtilizationread-onlycurrentRunning average of channel utilization in hundredth of a %.
1.3.6.1.4.1.4329.15.3.5.2.5.1.5ColumnapPerfRadioCurrentChannelUtilizationread-onlycurrentChannel utilization in % from latest statistics from AP.
1.3.6.1.4.1.4329.15.3.5.2.5.1.6ColumnapPerfRadioPrevPeakRSSread-onlycurrentPeak RSS in dBm from last 15 minute interval. Value of -100 means this field is not available.
1.3.6.1.4.1.4329.15.3.5.2.5.1.7ColumnapPerfRadioCurPeakRSSread-onlycurrentPeak RSS in dBm of current 15 minute interval. Value of -100 means this field is not available.
1.3.6.1.4.1.4329.15.3.5.2.5.1.8ColumnapPerfRadioAverageRSSread-onlycurrentRunning average of RSS in hundredth of a dBm. Value of -10000 means this field is not available.
1.3.6.1.4.1.4329.15.3.5.2.5.1.9ColumnapPerfRadioCurrentRSSread-onlycurrentRSS in dBm from latest statistics from AP. Value of -100 means this field is not available.
1.3.6.1.4.1.4329.15.3.5.2.5.1.10ColumnapPerfRadioPrevPeakSNRread-onlycurrentPeak SNR in dB from last 15 minute interval. Value of -100 means this field is not available.
1.3.6.1.4.1.4329.15.3.5.2.5.1.11ColumnapPerfRadioCurPeakSNRread-onlycurrentPeak SNR in dB of current 15 minute interval. Value of -100 means this field is not available.
1.3.6.1.4.1.4329.15.3.5.2.5.1.12ColumnapPerfRadioAverageSNRread-onlycurrentRunning average of SNR in hundredth of a dB. Value of -10000 means this field is not available.
1.3.6.1.4.1.4329.15.3.5.2.5.1.13ColumnapPerfRadioCurrentSNRread-onlycurrentSNR in dB from latest statistics from AP. Value of -100 means this field is not available.
1.3.6.1.4.1.4329.15.3.5.2.5.1.14ColumnapPerfRadioPrevPeakPktRetxread-onlycurrentPeak packet retransmissions in hundredth of pps from last 15 minute interval.
1.3.6.1.4.1.4329.15.3.5.2.5.1.15ColumnapPerfRadioCurPeakPktRetxread-onlycurrentPeak packet retransmissions in hundredth of pps of current 15 minute interval.
1.3.6.1.4.1.4329.15.3.5.2.5.1.16ColumnapPerfRadioAveragePktRetxread-onlycurrentRunning average of packet retransmissions in hundredth of pps.
1.3.6.1.4.1.4329.15.3.5.2.5.1.17ColumnapPerfRadioCurrentPktRetxread-onlycurrentPacket retransmissions in hundredth of pps from latest statistics from AP.
1.3.6.1.4.1.4329.15.3.5.2.5.1.18ColumnapPerfRadioPktRetxread-onlycurrentRunning counter of number of packet retransmissions.
1.3.6.1.4.1.4329.15.3.5.2.6TableapAccessibilityTablenot-accessiblecurrentA table showing the rate of associations, reassociations and deauthentications/dissassociations from each AP radio. The table contains one row per radio per ac…
1.3.6.1.4.1.4329.15.3.5.2.6.1RowapAccessibilityEntrynot-accessiblecurrentThe accessibility statistics of one AP radio.
1.3.6.1.4.1.4329.15.3.5.2.6.1.1ColumnapAccPrevPeakAssocReqRxread-onlycurrentPeak number of association requests in hundredth of requests per second received by AP from last 15 minute interval.
1.3.6.1.4.1.4329.15.3.5.2.6.1.2ColumnapAccCurPeakAssocReqRxread-onlycurrentPeak number of association requests in hundredth of requests per second received by AP of current 15 minute interval.
1.3.6.1.4.1.4329.15.3.5.2.6.1.3ColumnapAccAverageAssocReqRxread-onlycurrentRunning average of association requests in hundredth of requests per second received by an AP radio.
1.3.6.1.4.1.4329.15.3.5.2.6.1.4ColumnapAccCurrentAssocReqRxread-onlycurrentAssociation requests in hundredth of requests per second from latest statistics from AP.
1.3.6.1.4.1.4329.15.3.5.2.6.1.5ColumnapAccAssocReqRxread-onlycurrentRunning counter of association requests.
1.3.6.1.4.1.4329.15.3.5.2.6.1.6ColumnapAccPrevPeakReassocReqRxread-onlycurrentPeak number of re-association requests in hundredth of requests per second received by an AP radio from last 15 minute interval.
1.3.6.1.4.1.4329.15.3.5.2.6.1.7ColumnapAccCurPeakReassocReqRxread-onlycurrentPeak number of re-association requests in hundredth of requests per second received by an AP radio of current 15 minute interval.
1.3.6.1.4.1.4329.15.3.5.2.6.1.8ColumnapAccAverageReassocReqRxread-onlycurrentRunning average of re-association requests in hundredth of requests per second received by an AP radio.
1.3.6.1.4.1.4329.15.3.5.2.6.1.9ColumnapAccCurrentReassocReqRxread-onlycurrentRe-association requests in hundredth of requests per second received by an AP radio from latest statistics from AP.
1.3.6.1.4.1.4329.15.3.5.2.6.1.10ColumnapAccReassocReqRxread-onlycurrentRunning counter of re-association requests received by an AP radio.
1.3.6.1.4.1.4329.15.3.5.2.6.1.11ColumnapAccPrevPeakDisassocDeauthReqTxread-onlycurrentPeak number of disassociation/deauthentication requests in hundredth of requests per second transmitted by an AP radio from last 15 minute interval.
1.3.6.1.4.1.4329.15.3.5.2.6.1.12ColumnapAccCurPeakDisassocDeauthReqTxread-onlycurrentPeak number of disassociation/deauthentication requests in hundredth of requests per second transmitted by an AP radio of current 15 minute interval.
1.3.6.1.4.1.4329.15.3.5.2.6.1.13ColumnapAccAverageDisassocDeauthReqTxread-onlycurrentRunning average of disassociation/deauthentication requests in hundredth of requests per second transmitted by an AP radio.
1.3.6.1.4.1.4329.15.3.5.2.6.1.14ColumnapAccCurrentDisassocDeauthReqTxread-onlycurrentDisassociation/deauthentication requests in hundredth of requests per second transmitted by an AP radio from latest statistics from AP.
1.3.6.1.4.1.4329.15.3.5.2.6.1.15ColumnapAccDisassocDeauthReqTxread-onlycurrentRunning counter of disassociation/deauthentication requests transmitted by an AP radio.
1.3.6.1.4.1.4329.15.3.5.2.6.1.16ColumnapAccPrevPeakDisassocDeauthReqRxread-onlycurrentPeak number of disassociation/deauthentication requests in hundredth of requests per second received by an AP radio from last 15 minute interval.
1.3.6.1.4.1.4329.15.3.5.2.6.1.17ColumnapAccCurPeakDisassocDeauthReqRxread-onlycurrentPeak number of disassociation/deauthentication requests in hundredth of requests per second received by an AP radio of current 15 minute interval.
1.3.6.1.4.1.4329.15.3.5.2.6.1.18ColumnapAccAverageDisassocDeauthReqRxread-onlycurrentRunning average of disassociation/deauthentication requests in hundredth of requests per second received by an AP radio.
1.3.6.1.4.1.4329.15.3.5.2.6.1.19ColumnapAccCurrentDisassocDeauthReqRxread-onlycurrentDisassociation/deauthentication requests in hundredth of requests per second received by an AP radio from latest statistics from AP.
1.3.6.1.4.1.4329.15.3.5.2.6.1.20ColumnapAccDisassocDeauthReqRxread-onlycurrentRunning counter of disassociation/deauthentication requests received by an AP radio.
1.3.6.1.4.1.4329.15.3.5.2.7TableapPerformanceReportbyRadioAndWlanTablenot-accessiblecurrentTable of AP performance statistics by AP, AP radio and WLAN.
1.3.6.1.4.1.4329.15.3.5.2.7.1RowapPerformanceReportbyRadioAndWlanEntrynot-accessiblecurrentThe AP performance statistics of one AP radio and WLAN.
1.3.6.1.4.1.4329.15.3.5.2.7.1.1ColumnapPerfWlanPrevPeakClientsPerSecread-onlycurrentPeak clients per second from last 15 minute interval.
1.3.6.1.4.1.4329.15.3.5.2.7.1.2ColumnapPerfWlanCurPeakClientsPerSecread-onlycurrentPeak clients per second of current 15 minute interval.
1.3.6.1.4.1.4329.15.3.5.2.7.1.3ColumnapPerfWlanAverageClientsPerSecread-onlycurrentRunning average of clients in hundredth of clients per second.
1.3.6.1.4.1.4329.15.3.5.2.7.1.4ColumnapPerfWlanCurrentClientsPerSecread-onlycurrentClients per second from latest statistics from AP.
1.3.6.1.4.1.4329.15.3.5.2.7.1.5ColumnapPerfWlanPrevPeakULOctetsPerSecread-onlycurrentPeak uplink octets in hundredth of octets per second from last 15 minute interval.
1.3.6.1.4.1.4329.15.3.5.2.7.1.6ColumnapPerfWlanCurPeakULOctetsPerSecread-onlycurrentPeak uplink octets in hundredth of octets per second of current 15 minute interval.
1.3.6.1.4.1.4329.15.3.5.2.7.1.7ColumnapPerfWlanAverageULOctetsPerSecread-onlycurrentRunning average of uplink hundredth of octets per second.
1.3.6.1.4.1.4329.15.3.5.2.7.1.8ColumnapPerfWlanCurrentULOctetsPerSecread-onlycurrentUplink octets in hundredth of octets per second from latest statistics from AP.
1.3.6.1.4.1.4329.15.3.5.2.7.1.9ColumnapPerfWlanULOctetsread-onlycurrentRunning counter of uplink octets per second.
1.3.6.1.4.1.4329.15.3.5.2.7.1.10ColumnapPerfWlanPrevPeakULPktsPerSecread-onlycurrentPeak uplink packets in hundredth of packets per second from last 15 minute interval.
1.3.6.1.4.1.4329.15.3.5.2.7.1.11ColumnapPerfWlanCurPeakULPktsPerSecread-onlycurrentPeak uplink packets in hundredth of packets per second of current 15 minute interval.
1.3.6.1.4.1.4329.15.3.5.2.7.1.12ColumnapPerfWlanAverageULPktsPerSecread-onlycurrentRunning average of uplink packets in hundredth of packets per second.
1.3.6.1.4.1.4329.15.3.5.2.7.1.13ColumnapPerfWlanCurrentULPktsPerSecread-onlycurrentUplink packets in hundredth of packets per second from latest statistics from AP.
1.3.6.1.4.1.4329.15.3.5.2.7.1.14ColumnapPerfWlanULPktsread-onlycurrentRunning counter of uplink packets per second.
1.3.6.1.4.1.4329.15.3.5.2.7.1.15ColumnapPerfWlanPrevPeakDLOctetsPerSecread-onlycurrentPeak downlink octets in hundredth of octets per second from last 15 minute interval.
1.3.6.1.4.1.4329.15.3.5.2.7.1.16ColumnapPerfWlanCurPeakDLOctetsPerSecread-onlycurrentPeak downlink octets in hundredth of octets per second of current 15 minute interval.
1.3.6.1.4.1.4329.15.3.5.2.7.1.17ColumnapPerfWlanAverageDLOctetsPerSecread-onlycurrentRunning average of downlink octets in hundredth of octets per second.
1.3.6.1.4.1.4329.15.3.5.2.7.1.18ColumnapPerfWlanCurrentDLOctetsPerSecread-onlycurrentDownlink octets in hundredth octets per second from latest statistics from AP.
1.3.6.1.4.1.4329.15.3.5.2.7.1.19ColumnapPerfWlanDLOctetsread-onlycurrentRunning counter of downlink octets per second.
1.3.6.1.4.1.4329.15.3.5.2.7.1.20ColumnapPerfWlanPrevPeakDLPktsPerSecread-onlycurrentPeak downlink packets in hundredth of packets per second from last 15 minute interval.
1.3.6.1.4.1.4329.15.3.5.2.7.1.21ColumnapPerfWlanCurPeakDLPktsPerSecread-onlycurrentPeak downlink packets in hundredth of packets per second of current 15 minute interval.
1.3.6.1.4.1.4329.15.3.5.2.7.1.22ColumnapPerfWlanAverageDLPktsPerSecread-onlycurrentRunning average of downlink packets in hundredth of packets per second.
1.3.6.1.4.1.4329.15.3.5.2.7.1.23ColumnapPerfWlanCurrentDLPktsPerSecread-onlycurrentDownlink packets in hundredth of packets per second from latest statistics from AP.
1.3.6.1.4.1.4329.15.3.5.2.7.1.24ColumnapPerfWlanDLPktsread-onlycurrentRunning counter of downlink packets per second.
1.3.6.1.4.1.4329.15.3.5.2.8TableapChannelUtilizationTablenot-accessiblecurrentTable of AP utilization by channel that the AP can change dynamically. It contains one entry for each radio and channel of each active AP.
1.3.6.1.4.1.4329.15.3.5.2.8.1RowapChannelUtilizationEntrynot-accessiblecurrentThe AP performance statistics of one AP radio and channel.
1.3.6.1.4.1.4329.15.3.5.2.8.1.1Columnchannelnot-accessiblecurrentChannel on which utilization is measured.
1.3.6.1.4.1.4329.15.3.5.2.8.1.2ColumnapChnlUtilPrevPeakUtilizationread-onlycurrentPeak channel utilization in % from last 15 minute interval.
1.3.6.1.4.1.4329.15.3.5.2.8.1.3ColumnapChnlUtilCurPeakUtilizationread-onlycurrentPeak channel utilization in % of current 15 minute interval.
1.3.6.1.4.1.4329.15.3.5.2.8.1.4ColumnapChnlUtilAverageUtilizationread-onlycurrentRunning average of channel utilization in hundredth of %.
1.3.6.1.4.1.4329.15.3.5.2.8.1.5ColumnapChnlUtilCurrentUtilizationread-onlycurrentChannel utilization in % from latest statistics from AP.
1.3.6.1.4.1.4329.15.3.5.2.9TableapNeighboursTablenot-accessiblecurrentA table showing the BSSID, RSS, operating radio channel and detailed information of a nearby AP. The table contains one row per nearby AP per radio per active …
1.3.6.1.4.1.4329.15.3.5.2.9.1RowapNeighboursEntrynot-accessiblecurrentThe configuration attributes of one nearby AP.
1.3.6.1.4.1.4329.15.3.5.2.9.1.1ColumnnearbyApIndexnot-accessiblecurrentNearby AP index.
1.3.6.1.4.1.4329.15.3.5.2.9.1.2ColumnnearbyApInforead-onlycurrentDetailed information of a nearby AP.
1.3.6.1.4.1.4329.15.3.5.2.9.1.3ColumnnearbyApBSSIDread-onlycurrentThe BSSID of a nearby AP.
1.3.6.1.4.1.4329.15.3.5.2.9.1.4ColumnnearbyApChannelread-onlycurrentThe operating radio channel of a nearby AP.
1.3.6.1.4.1.4329.15.3.5.2.9.1.5ColumnnearbyApRSSread-onlycurrentThe Received Signal Strength of a nearby AP.
1.3.6.1.4.1.4329.15.3.5.3NodesensorManagement
1.3.6.1.4.1.4329.15.3.5.3.1ScalartftpSeverread-writecurrentTFTP server that sensor image resides.
1.3.6.1.4.1.4329.15.3.5.3.2ScalarimagePath26xxread-writecurrentPath of sensor image on TFTP server.
1.3.6.1.4.1.4329.15.3.5.3.3ScalarimagePath36xxread-writecurrentPath of sensor image on TFTP server.
1.3.6.1.4.1.4329.15.3.5.3.4ScalarimageVersionOfap26xxread-writecurrentSensor's software version.
1.3.6.1.4.1.4329.15.3.5.3.5ScalarimageVersionOfngap36xxread-writecurrentSensor's softerware version for Next Generation Access Point.
1.3.6.1.4.1.4329.15.3.5.4NodeapRegistration
1.3.6.1.4.1.4329.15.3.5.4.1ScalarapRegSecurityModeread-writecurrentIndicates registration mode for an AP. If allowAll(1), then all wireless APs are allowed to register to the controlloer, otherwise only approved APs in 'Approv…
1.3.6.1.4.1.4329.15.3.5.4.2ScalarapRegDiscoveryRetriesread-writecurrentNumber of retries for discovery requests from an access point to controller. After these number of retries, the access point will start over again after some a…
1.3.6.1.4.1.4329.15.3.5.4.3ScalarapRegDiscoveryIntervalread-writecurrentInterval between two consecutive discovery requests from the same access point.
1.3.6.1.4.1.4329.15.3.5.4.4ScalarapRegTelnetPasswordread-writecurrentPassword used to access an AP via telnet. This field is write-only and read access returns empty string.
1.3.6.1.4.1.4329.15.3.5.4.5ScalarapRegSSHPasswordread-writecurrentSSH password used to access an access point. This field is write-only and read access returns empty string.
1.3.6.1.4.1.4329.15.3.5.4.6ScalarapRegUseClusterEncryptionread-writecurrentIf this field set to true, then all APs in the cluster use cluster encryption.
1.3.6.1.4.1.4329.15.3.5.4.7ScalarapRegClusterSharedSecretread-writecurrentPassword for cluster encryption. This field is write-only and read access returns empty string.
1.3.6.1.4.1.4329.15.3.5.5NodeloadBalancing
1.3.6.1.4.1.4329.15.3.5.5.1TableloadGroupTablenot-accessiblecurrentTable of configured load groups for access points. A set of access points can be grouped together and they are identified by unique name. An access point can o…
1.3.6.1.4.1.4329.15.3.5.5.1.1RowloadGroupEntrynot-accessiblecurrentAn entry containing definition of a load group. There exists two types of load group: client-balancing-group and radio-balancing-group.
1.3.6.1.4.1.4329.15.3.5.5.1.1.1ColumnloadGroupIDread-onlycurrentInternally generated ID for a group and cannot be changed externally.
1.3.6.1.4.1.4329.15.3.5.5.1.1.2ColumnloadGroupNameread-writecurrentUnique name assigned to the group.
1.3.6.1.4.1.4329.15.3.5.5.1.1.3ColumnloadGroupTyperead-writecurrentType of load balancing this group supports.
1.3.6.1.4.1.4329.15.3.5.5.1.1.4ColumnloadGroupBandPreferenceread-writecurrentBand preference is enabled for this group if this field is set to true and group type is set to radioBalancing(1).
1.3.6.1.4.1.4329.15.3.5.5.1.1.5ColumnloadGroupLoadControlread-writedeprecatedLoad balancing is enabled for this group if this field is set to true and group type is set to radioBalancing(1).
1.3.6.1.4.1.4329.15.3.5.5.1.1.6ColumnloadGroupClientCountRadio1read-writecurrentMaximum number of client on this radio. This field is only applicable to a group with radioBalancing(1) type.
1.3.6.1.4.1.4329.15.3.5.5.1.1.7ColumnloadGroupClientCountRadio2read-writecurrentMaximum number of client on this radio. This field is only applicable to a group with radioBalancing(1) type.
1.3.6.1.4.1.4329.15.3.5.5.1.1.8ColumnloadGroupLoadControlEnableR1read-writecurrentIf it is enabled then load control is applicable to radio #1 of all access points that are assigned to this load group. This field has meaning only for the loa…
1.3.6.1.4.1.4329.15.3.5.5.1.1.9ColumnloadGroupLoadControlEnableR2read-writecurrentIf it is enabled then load control is applicable to radio #2 of all access points that are assigned to this load group. This field has meaning only for the loa…
1.3.6.1.4.1.4329.15.3.5.5.1.1.10ColumnloadGroupLoadControlStrictLimitR1read-writecurrentIf it is enabled then strict limit for load control is applicable to radio #1 of all access points that are assigned to this load group. This field has meaning…
1.3.6.1.4.1.4329.15.3.5.5.1.1.11ColumnloadGroupLoadControlStrictLimitR2read-writecurrentIf it is enabled then strict limit for load control is applicable to radio #2 of all access points that are assigned to this load group. This field has meaning…
1.3.6.1.4.1.4329.15.3.5.5.2TableloadGrpRadiosTablenot-accessiblecurrentTable of radio assignment to defined load groups.
1.3.6.1.4.1.4329.15.3.5.5.2.1RowloadGrpRadiosEntrynot-accessiblecurrentAny entry defining radio assignment of AP, identified by apIndex, to a load group identified by loadGroupID.
1.3.6.1.4.1.4329.15.3.5.5.2.1.2ColumnloadGrpRadiosRadio1read-writecurrentIf this field is set to 'assigned(1)', then the radio of the AP identified by the apIndex is a member of the load balancing group identified by the loadBlanace…
1.3.6.1.4.1.4329.15.3.5.5.2.1.3ColumnloadGrpRadiosRadio2read-writecurrentIf this field is set to 'assigned(2)', then the radio of the AP identified by the apIndex is a member of the load balancing group identified by the loadBlanace…
1.3.6.1.4.1.4329.15.3.5.5.3TableloadGrpWlanTablenot-accessiblecurrentTable of WLAN assignment to defined load groups.
1.3.6.1.4.1.4329.15.3.5.5.3.1RowloadGrpWlanEntrynot-accessiblecurrentAn entry defining WLAN, identified by wlanID, assignment to a load group identified by loadGroupID.
1.3.6.1.4.1.4329.15.3.5.5.3.1.1ColumnloadGrpWlanAssignedread-writecurrentAssignement of WLAN, identified with wlanID, to the load balancing group identified bye loadGroupID.
1.3.6.1.4.1.4329.15.3.5.6NodeapMaintenanceCycle
1.3.6.1.4.1.4329.15.3.5.6.1Scalarscheduleread-writecurrentAP maintenance schedule options. 0 : never perform the maintenance action. 1 : perform the maintenance action every day. 2 : perform the maintenance action eve…
1.3.6.1.4.1.4329.15.3.5.6.2ScalarstartHourread-writecurrentMaintenance action starts at this hour of the day.
1.3.6.1.4.1.4329.15.3.5.6.3ScalarstartMinuteread-writecurrentMaintenance action starts at this minute of the hour.
1.3.6.1.4.1.4329.15.3.5.6.4Scalardurationread-writecurrentDuration of the AP maintenance cycle (how often maintenance is done) in hours.
1.3.6.1.4.1.4329.15.3.5.6.5ScalarrecurrenceDailyread-writecurrentThis field has meaning only when the maintenance schedule option is set to daily(1). Below is the recurrence option. 0 : every day. 1 : every weekday. 2 : ever…
1.3.6.1.4.1.4329.15.3.5.6.6ScalarrecurrenceWeeklyread-writecurrentThis field has meaning only when the maintenance schedule option is set to weekly(2). Below are the recurrence options. BIT 0 : Sunday. BIT 1 : Monday. BIT 2 :…
1.3.6.1.4.1.4329.15.3.5.6.7ScalarrecurrenceMonthlyread-writecurrentThis field has meaning only when the maintenance schedule option is set to monthly(3). Below are the recurrence options. BIT 0 : the first week of the month. B…
1.3.6.1.4.1.4329.15.3.5.6.8ScalarapPlatformsread-writecurrentSelect which models of the AP platforms to perform the maintenance. BIT 0 : AP2600 platform. BIT 1 : AP2605 platform. BIT 2 : AP2650 platform. BIT 3 : AP4102 p…
1.3.6.1.4.1.4329.15.3.6NodemobileUnits
1.3.6.1.4.1.4329.15.3.6.1ScalarmobileUnitCountread-writecurrentNumber of clients associated with the controller.
1.3.6.1.4.1.4329.15.3.6.2TablemuTablenot-accessiblecurrentTable of information for clients associated with the EWC.
1.3.6.1.4.1.4329.15.3.6.2.1RowmuEntrynot-accessiblecurrentInformation for a client associated with the EWC.
1.3.6.1.4.1.4329.15.3.6.2.1.1ColumnmuMACAddressread-onlycurrentClient MAC address.
1.3.6.1.4.1.4329.15.3.6.2.1.2ColumnmuIPAddressread-onlycurrentClient IP Address.
1.3.6.1.4.1.4329.15.3.6.2.1.3ColumnmuUserread-onlycurrentClient login name.
1.3.6.1.4.1.4329.15.3.6.2.1.4ColumnmuStateread-onlycurrentTrue if the client is authenticated.
1.3.6.1.4.1.4329.15.3.6.2.1.5ColumnmuAPSerialNoread-onlycurrentSerial Number of the Access Point the client is associated with.
1.3.6.1.4.1.4329.15.3.6.2.1.6ColumnmuVnsSSIDread-onlycurrentSSID of the VNS the client is associated with.
1.3.6.1.4.1.4329.15.3.6.2.1.7ColumnmuTxPacketsread-onlycurrentNumber of packets trasmitted to the client.
1.3.6.1.4.1.4329.15.3.6.2.1.8ColumnmuRxPacketsread-onlycurrentNumber of packets received from the client.
1.3.6.1.4.1.4329.15.3.6.2.1.9ColumnmuTxOctetsread-onlycurrentNumber of octets transmitted to the client.
1.3.6.1.4.1.4329.15.3.6.2.1.10ColumnmuRxOctetsread-onlycurrentNumber of octets received from the client.
1.3.6.1.4.1.4329.15.3.6.2.1.11ColumnmuDurationread-onlycurrentTime client has been associated with the EWC.
1.3.6.1.4.1.4329.15.3.6.2.1.12ColumnmuAPNameread-onlycurrentName of the Access Point the client is associated with.
1.3.6.1.4.1.4329.15.3.6.2.1.13ColumnmuTopologyNameread-onlycurrentTopology name that the MU is associated with.
1.3.6.1.4.1.4329.15.3.6.2.1.14ColumnmuPolicyNameread-onlycurrentThe name of the policy that provides filter for this MU.
1.3.6.1.4.1.4329.15.3.6.2.1.15ColumnmuDefaultCoSread-onlycurrentThe CoS that is applied to the current traffic if the defined rule for the current traffic has not specifically defined any CoS.
1.3.6.1.4.1.4329.15.3.6.2.1.16ColumnmuConnectionProtocolread-onlycurrentThe MU is using this connection protocol for current connection. Symbols notation: n50 = an = n5.0Ghz, n24 = bgn = n2.4Ghz
1.3.6.1.4.1.4329.15.3.6.2.1.17ColumnmuConnectionCapabilityread-onlydeprecatedThis field indicates what are the MU connection capability.
1.3.6.1.4.1.4329.15.3.6.2.1.18ColumnmuWLANIDread-onlycurrentID of the WLAN that the MU is associated with.
1.3.6.1.4.1.4329.15.3.6.2.1.19ColumnmuBSSIDMacread-onlycurrentClient BSSID MAC address.
1.3.6.1.4.1.4329.15.3.6.2.1.20ColumnmuDot11ConnectionCapabilityread-writecurrentThis field indicates what are the MU connection capabilities. bit 0 : If this bit is set, the client is capable to tx/rx on A radio. bit 1 : If this bit is set…
1.3.6.1.4.1.4329.15.3.6.3TablemuTSPECTablenot-accessiblecurrentTable of information for Admission Control Statistics by active client.
1.3.6.1.4.1.4329.15.3.6.3.1RowmuTSPECEntrynot-accessiblecurrentInformation for Admission Control Statistics by active client.
1.3.6.1.4.1.4329.15.3.6.3.1.1ColumntspecMuMACAddressread-onlycurrentClient MAC address.
1.3.6.1.4.1.4329.15.3.6.3.1.2ColumntspecACread-onlycurrentAccess Category, such as Best Effort, Background, Voice, Video, and Reserved.
1.3.6.1.4.1.4329.15.3.6.3.1.3ColumntspecDirectionread-onlycurrentTraffic direction, such as uplink direction, downlink direction.
1.3.6.1.4.1.4329.15.3.6.3.1.4ColumntspecApSerialNumberread-onlycurrent16-character serial number of the AccessPoint.
1.3.6.1.4.1.4329.15.3.6.3.1.5ColumntspecMuIPAddressread-onlycurrentClient IP Address.
1.3.6.1.4.1.4329.15.3.6.3.1.6ColumntspecBssMacread-onlycurrentAccess Point BSSID.
1.3.6.1.4.1.4329.15.3.6.3.1.7ColumntspecSsidread-onlycurrentVNS SSID.
1.3.6.1.4.1.4329.15.3.6.3.1.8ColumntspecMDRread-onlycurrentMean Data Rate (bytes per second).
1.3.6.1.4.1.4329.15.3.6.3.1.9ColumntspecNMSread-onlycurrentNominal MSDU size (bytes).
1.3.6.1.4.1.4329.15.3.6.3.1.10ColumntspecSBAread-onlycurrentSurplus Bandwidth Allowance.
1.3.6.1.4.1.4329.15.3.6.3.1.11ColumntspecDlRateread-onlycurrentDownlink Rate (bytes per second).
1.3.6.1.4.1.4329.15.3.6.3.1.12ColumntspecUlRateread-onlycurrentUplink Rate (bytes per second).
1.3.6.1.4.1.4329.15.3.6.3.1.13ColumntspecDlViolationsread-onlycurrentDownlink Violations (bytes per second).
1.3.6.1.4.1.4329.15.3.6.3.1.14ColumntspecUlViolationsread-onlycurrentUplink Violations (bytes per second).
1.3.6.1.4.1.4329.15.3.6.3.1.15ColumntspecProtocolread-onlycurrent802.11 radio protocol.
1.3.6.1.4.1.4329.15.3.6.4ScalarmuACLTyperead-writecurrentMUs can access EWC by sending association request and providing proper credentials. However, EWC allows creation of a master list of a blacklist or a whitelist…
1.3.6.1.4.1.4329.15.3.6.5TablemuACLTablenot-accessiblecurrentSemantics of this list is directly related to muACLType. Access Control List(ACL) is list of MUs and their access rights. An MU can either belong to 'Blacklist…
1.3.6.1.4.1.4329.15.3.6.5.1RowmuACLEntrynot-accessiblecurrentAn entry about an MU and its ACL.
1.3.6.1.4.1.4329.15.3.6.5.1.1ColumnmuACLMACAddressread-onlycurrentMAC address of MU.
1.3.6.1.4.1.4329.15.3.6.5.1.2ColumnmuACLRowStatusread-createcurrentAn MU can either be added or removed to this list, therefore, allowed set values for this field are: createAndGo, destroy.
1.3.6.1.4.1.4329.15.3.6.6TablemuAccessListTablenot-accessiblecurrentSemantics of this list is directly related to muACLType. Access List Control(ACL) list of MUs and their access rights. An MU can either belong to 'Blacklist', …
1.3.6.1.4.1.4329.15.3.6.6.1RowmuAccessListEntrynot-accessiblecurrentAn entry about about an MU and its ACL.
1.3.6.1.4.1.4329.15.3.6.6.1.1ColumnmuAccessListMACAddressread-onlycurrentMAC address of MU.
1.3.6.1.4.1.4329.15.3.6.6.1.2ColumnmuAccessListBitmaskLengthread-createcurrentLength of bitmask associated to the MAC address in the entry.
1.3.6.1.4.1.4329.15.3.6.6.1.3ColumnmuAccessListRowStatusread-createcurrentAn MU can either be added or removed to this list, therefore, allowed set values for this field are: createAndGo, destroy.
1.3.6.1.4.1.4329.15.3.7Nodeassociations
1.3.6.1.4.1.4329.15.3.7.1ScalarassocCountread-writecurrentTotal number of current client associations to the access point.
1.3.6.1.4.1.4329.15.3.7.2TableassocTablenot-accessiblecurrentTable of information about clients associated with the access point.
1.3.6.1.4.1.4329.15.3.7.2.1RowassocEntrynot-accessiblecurrentInformation for a single client in the association table.
1.3.6.1.4.1.4329.15.3.7.2.1.1ColumnassocMUMacAddressread-onlycurrentMAC address of the client.
1.3.6.1.4.1.4329.15.3.7.2.1.2ColumnassocStartSysUpTimeread-onlycurrentThe system uptime that client became associated with the access point.
1.3.6.1.4.1.4329.15.3.7.2.1.3ColumnassocTxPacketsread-onlycurrentNubmer of tx packets to the client.
1.3.6.1.4.1.4329.15.3.7.2.1.4ColumnassocRxPacketsread-onlycurrentNumber of received packets from the client.
1.3.6.1.4.1.4329.15.3.7.2.1.5ColumnassocTxOctetsread-onlycurrentNumber of octets sent to the client.
1.3.6.1.4.1.4329.15.3.7.2.1.6ColumnassocRxOctetsread-onlycurrentNumber of octets received from the client.
1.3.6.1.4.1.4329.15.3.7.2.1.7ColumnassocDurationread-writecurrentLength of time since last association.
1.3.6.1.4.1.4329.15.3.7.2.1.8ColumnassocVnsIfIndexread-onlycurrentIndex of VNS to which the MU is associated with.
1.3.6.1.4.1.4329.15.3.8Nodeprotocols
1.3.6.1.4.1.4329.15.3.8.1Nodewassp
1.3.6.1.4.1.4329.15.3.9NodelogNotifications
1.3.6.1.4.1.4329.15.3.9.1ScalarlogEventSeverityThresholdread-writecurrentSpecifies the minimum level at which the SNMP agent will send notifications for log events. I.e., setting this value to 'major' will send notifcations for crit…
1.3.6.1.4.1.4329.15.3.9.3ScalarlogEventSeverityread-onlycurrentContains the severity of the most recently trapped hiPathWirelessLogAlarm notification.
1.3.6.1.4.1.4329.15.3.9.4ScalarlogEventComponentread-onlycurrentContains the component which sent the most recently trapped hiPathWirelessLogAlarm notification.
1.3.6.1.4.1.4329.15.3.9.5ScalarlogEventDescriptionread-onlycurrentContains the description of the most recently trapped hiPathWirelessLogAlarm.
1.3.6.1.4.1.4329.15.3.9.6NotificationhiPathWirelessLogAlarmcurrentComponents of an alarm.
1.3.6.1.4.1.4329.15.3.10Nodesites
1.3.6.1.4.1.4329.15.3.10.1ScalarsiteMaxEntriesread-onlycurrentThe maximum number of entries allowed in the siteTable. This value is platform dependent.
1.3.6.1.4.1.4329.15.3.10.2ScalarsiteNumEntriesread-onlycurrentThe current number of entries in the siteTable.
1.3.6.1.4.1.4329.15.3.10.3ScalarsiteTableNextAvailableIndexread-onlycurrentThis object indicates the numerically lowest available index within this entity, which may be used for the value of siteID in the creation of a new entry in th…
1.3.6.1.4.1.4329.15.3.10.4TablesiteTablenot-accessiblecurrentA site is a logical entity that is constituted by collection of APs, CoS rules, policies, Radius server, WLAN, etc. A site is identified by a unique name.
1.3.6.1.4.1.4329.15.3.10.4.1RowsiteEntrynot-accessiblecurrentDefinition of a site.
1.3.6.1.4.1.4329.15.3.10.4.1.1ColumnsiteIDread-onlycurrentAn unique ID, identifying the site in the context of the controller. The site ID can be an integer value from 1 to the maximum number of APs supported by the E…
1.3.6.1.4.1.4329.15.3.10.4.1.2ColumnsiteRowStatusread-createcurrentRow status for the entry.
1.3.6.1.4.1.4329.15.3.10.4.1.3ColumnsiteNameread-createcurrentTextual description to identify the site in the context of the controller.
1.3.6.1.4.1.4329.15.3.10.4.1.4ColumnsiteLocalRadiusAuthenticationread-createcurrentIf this value is set to true, then the RADIUS client is on APs, otherwise the RADIUS client is on controller.
1.3.6.1.4.1.4329.15.3.10.4.1.5ColumnsiteDefaultDNSServerread-createcurrentIf the APs associated to the site uses DHCP, and DHCP server does not assign DNS server, then this entry will be used for that purpose. Otherwise, if AP is con…
1.3.6.1.4.1.4329.15.3.10.4.1.6ColumnsiteEnableSecureTunnelread-createcurrentIf set to true secure communication key sent to APs to be used to encrypt the traffic between APs within the site and the traffic between controller and APs. H…
1.3.6.1.4.1.4329.15.3.10.4.1.7ColumnsiteEncryptCommAPtoControllerread-createcurrentIf set to true, communication between APs within the site and the controller are encrypted using defined encyption. For details about encryption type, please r…
1.3.6.1.4.1.4329.15.3.10.4.1.8ColumnsiteEncryptCommBetweenAPsread-createcurrentIf set to true, communication between APs within the site are encrypted using defined encyption. For details about encryption type, please refer to user manual.
1.3.6.1.4.1.4329.15.3.10.4.1.9ColumnsiteBandPreferenceEnableread-createcurrentEnabling/disabling band preference for the site and associated APs. By enabling band preference 11a-capable clients can be moved to 11a radio and relieve the c…
1.3.6.1.4.1.4329.15.3.10.4.1.10ColumnsiteLoadControlEnableR1read-createcurrentEnabling/disabling load control for the site for this radio. Load control manages the number of clients on the Radio #1 by disallowing additional clients on th…
1.3.6.1.4.1.4329.15.3.10.4.1.11ColumnsiteLoadControlEnableR2read-createcurrentEnabling/disabling load control for the site for this radio. Load control manages the number of clients on the Radio #2 by disallowing additional clients on th…
1.3.6.1.4.1.4329.15.3.10.4.1.12ColumnsiteMaxClientR1read-createcurrentMaximum number of clients that are allowed to be associated to this radio (radio #1). If the Load Control is not enabled then the maximum for this radio uses d…
1.3.6.1.4.1.4329.15.3.10.4.1.13ColumnsiteMaxClientR2read-createcurrentMaximum number of clients that are allowed to be associated to this radio (radio #2). If the Load Control is not enabled then the maximum for this radio uses d…
1.3.6.1.4.1.4329.15.3.10.4.1.14ColumnsiteStrictLimitEnableR1read-createcurrentEnabling/disabling strict limit of load control for this radio that is assigned to the site. Eanbleing strict limit enforces configured client limit for the ra…
1.3.6.1.4.1.4329.15.3.10.4.1.15ColumnsiteStrictLimitEnableR2read-createcurrentEnabling/disabling strict limit of load control for this radio that is assigned to the site. Eanbleing strict limit enforces configured client limit for the ra…
1.3.6.1.4.1.4329.15.3.10.4.1.16ColumnsiteReplaceStnIDwithSiteNameread-createcurrentIf this value is set to true, then the called station ID will be replaced with the site name.
1.3.6.1.4.1.4329.15.3.10.5TablesitePolicyTablenot-accessiblecurrentEach site can have zero or more policies assigned to it. All policies associated to a site are pushed to the all APs belonging to the site. This table defines …
1.3.6.1.4.1.4329.15.3.10.5.1RowsitePolicyEntrynot-accessiblecurrentAn entry defining assignment of a policy, identified by sitePolicyID, to a site, identified by siteID.
1.3.6.1.4.1.4329.15.3.10.5.1.1ColumnsitePolicyIDnot-accessiblecurrentThe policy index, as defined ENTERASYS-POLICY-PROFILE-MIB::etsysPolicyProfileIndex.
1.3.6.1.4.1.4329.15.3.10.5.1.2ColumnsitePolicyMemberread-writecurrentIndicates whether the policy associated with this row is a member of the zone identified by zoneID.
1.3.6.1.4.1.4329.15.3.10.6TablesiteCosTablenot-accessiblecurrentEach site can have zero or more CoS assigned to it. All CoS associated to a site are pushed to the all APs belonging to the site. This table defines the assign…
1.3.6.1.4.1.4329.15.3.10.6.1RowsiteCosEntrynot-accessiblecurrentAn entry defining assignment of a CoS, identified by siteCoSID, to a site, identified by siteID.
1.3.6.1.4.1.4329.15.3.10.6.1.1ColumnsiteCoSIDnot-accessiblecurrentThe CoS index, as defined in ENTERASYS-POLICY-PROFILE-MIB::etsysCosIndex.
1.3.6.1.4.1.4329.15.3.10.6.1.2ColumnsiteCoSMemberread-onlycurrentIndicates whether the CoS associated with this row is a member of the site identified by siteID.
1.3.6.1.4.1.4329.15.3.10.7TablesiteAPTablenot-accessiblecurrentA site can have zero or more Access Points(AP) assigned to it. This table defines the assignment of various APs to various sites.
1.3.6.1.4.1.4329.15.3.10.7.1RowsiteAPEntrynot-accessiblecurrentAn entry defining assignment of an AP, identified by apIndex, to a site, identified by siteID.
1.3.6.1.4.1.4329.15.3.10.7.1.1ColumnsiteAPMemberread-writecurrentIndicates whether the AP associated with this row is a member of the site identified by siteID.
1.3.6.1.4.1.4329.15.3.10.8TablesiteWlanTablenot-accessiblecurrentA site can have zero or more WLAN assigned to it. All WLANs that are associated with a site are pushed to the all APs belonging to the site. This table defines…
1.3.6.1.4.1.4329.15.3.10.8.1RowsiteWlanEntrynot-accessiblecurrentAn entry defining assignment of a WLAN identified by siteWlanID, to a site, identified by siteID.
1.3.6.1.4.1.4329.15.3.10.8.1.1ColumnsiteWlanApRadioIndexnot-accessiblecurrentDescription.
1.3.6.1.4.1.4329.15.3.10.8.1.2ColumnsiteWlanApRadioAssignedread-writecurrentDescription.
1.3.6.1.4.1.4329.15.3.11NodewidsWips
1.3.6.1.4.1.4329.15.3.11.1ScalarmitigatorAnalysisEngineread-writecurrentMitigator analysis engine can be enabled/disabled using this variable. All mitigator related objects, objects defined in widsWips subtree, can only be accessed…
1.3.6.1.4.1.4329.15.3.11.2ScalarscanGroupMaxEntriesread-onlycurrentMaximum number of scan groups that can be created on the device.
1.3.6.1.4.1.4329.15.3.11.3ScalarscanGroupsCurrentEntriesread-onlycurrentNumber of scan groups currently have been created on the device.
1.3.6.1.4.1.4329.15.3.11.4ScalaractiveThreatsCountsread-onlycurrentNumber of currently active threats that have been detected.
1.3.6.1.4.1.4329.15.3.11.5ScalarfriendlyAPCountsread-onlycurrentNumber of friendly access points that have been discovered at this point.
1.3.6.1.4.1.4329.15.3.11.6ScalaruncategorizedAPCountsread-onlycurrentNumber of uncategorized access points that have been discovered. This value refers to current number not the historical value.
1.3.6.1.4.1.4329.15.3.11.11TablewidsWipsEngineTablenot-accessiblecurrentTable of Mitigators defined on set of controllers each identified by widsWipsEngineControllerIPAddress.
1.3.6.1.4.1.4329.15.3.11.11.1RowwidsWipsEngineEntrynot-accessiblecurrentOne entry in this table identifying a mitigator engine in a defined controller identified by IP address, widsWipsEngineControllerIPAddress.
1.3.6.1.4.1.4329.15.3.11.11.1.1ColumnwidsWipsEngineRowStatusread-createcurrentRowStatus for creation/deletion of mitigator engine row.
1.3.6.1.4.1.4329.15.3.11.11.1.2ColumnwidsWipsEngineControllerIPAddressread-createcurrentIp address of the controller that the defined mitigator in this row will run on.
1.3.6.1.4.1.4329.15.3.11.11.1.3ColumnwidsWipsEnginePollIntervalread-createcurrentPoll interval in seconds between successive keep alive messages between this controller and the mitigator engine to monitor status of mitigator engine.
1.3.6.1.4.1.4329.15.3.11.11.1.4ColumnwidsWipsEnginePollRetryread-createcurrentNumber of consecutive retries of failed contact to a mitigator agent before declaring mitigator engine dead.
1.3.6.1.4.1.4329.15.3.11.12TableinServiceScanGroupTablenot-accessiblecurrentIn service scan group enables the subsystem simultaneously scan for threats and performs wireless bridging based on 37xx-based APs. The threats are discovered …
1.3.6.1.4.1.4329.15.3.11.12.1RowinServiceScanGroupEntrynot-accessiblecurrentAn entry in this table that defines attributes of a in-service scan group.
1.3.6.1.4.1.4329.15.3.11.12.1.1ColumnscanGroupProfileIDnot-accessiblecurrentA internally unique identifier for a scan group. Each scan group is indexed by this value.
1.3.6.1.4.1.4329.15.3.11.12.1.2ColumninSrvScanGrpNameread-createcurrentTextual description identifying the scan group.
1.3.6.1.4.1.4329.15.3.11.12.1.3ColumninSrvScanGrpSecurityThreatsread-createcurrentEnable/disable security engine to scan for threats.
1.3.6.1.4.1.4329.15.3.11.12.1.4ColumninSrvScanGrpMaxConcurrentAttacksPerAPread-createcurrentMax number of concurrent attacks per AP
1.3.6.1.4.1.4329.15.3.11.12.1.5ColumninSrvScanGrpCounterMeasuresTyperead-createcurrentbit 0: Setting this bit prevents authorized stations from roaming to external honeypot APs. bit 1: Setting this bit prevents authorized stations from roaming t…
1.3.6.1.4.1.4329.15.3.11.12.1.6ColumninSrvScanGrpScan2400MHzSelectionread-createcurrentbit 0: by setting this bit scanning is performed on 2412 MHz frequency channel bit 1: by setting this bit scanning is performed on 2417 MHz frequency channel b…
1.3.6.1.4.1.4329.15.3.11.12.1.7ColumninSrvScanGrpScan5GHzSelectionread-createcurrentbit 0: by setting this bit scanning is performed on 5040 MHz frequency channel bit 1: by setting this bit scanning is performed on 5060 MHz frequency channel b…
1.3.6.1.4.1.4329.15.3.11.12.1.8ColumninSrvScanGrpblockAdHocClientsPeriodread-createcurrentNumber of seconds removing network access to the clients that are in ad hoc mode.
1.3.6.1.4.1.4329.15.3.11.12.1.9ColumninSrvScanGrpClassifySourceIFread-createcurrentThis variable allows to enable/disable classify sources of interference
1.3.6.1.4.1.4329.15.3.11.12.1.10ColumninSrvScanGrpRowStatusread-createcurrentRowStatus field for creation/deletion or changing row status.
1.3.6.1.4.1.4329.15.3.11.12.1.11ColumninSrvScanGrpDetectRogueAPread-createcurrentThis enables/disables rogue AP detection.
1.3.6.1.4.1.4329.15.3.11.12.1.12ColumninSrvScanGrpListeningPortread-writecurrentThis OID represents the UDP port number that APs are to listen on while performing rogue AP detection. It has meaning only when inSrvScanGrpDetectRogueAP is en…
1.3.6.1.4.1.4329.15.3.11.13TableoutOfServiceScanGroupTablenot-accessiblecurrentOut of service scan group is used to collect and classify various wireless identifiers that are discovered in the deployment environment. Legacy APs (26xx-base…
1.3.6.1.4.1.4329.15.3.11.13.1RowoutOfServiceScanGroupEntrynot-accessiblecurrentAn entry in this table that defines attributes of a out-of-service scan group.
1.3.6.1.4.1.4329.15.3.11.13.1.1ColumnoutOfSrvScanGrpNameread-createcurrentHuman readable textual description identifying scan group.
1.3.6.1.4.1.4329.15.3.11.13.1.2ColumnoutOfSrvScanGrpRadioread-createcurrentRadio selection for the scan group. Selected radio will be used in sacn group.
1.3.6.1.4.1.4329.15.3.11.13.1.3ColumnoutOfSrvScanGrpChannelListread-createcurrentIdentifying the channel(s) which will be used for the defined scan group.
1.3.6.1.4.1.4329.15.3.11.13.1.4ColumnoutOfSrvScanGrpScanTyperead-createcurrentThis field allows to select the type of scanning, active/passive, this scan group will be executing.
1.3.6.1.4.1.4329.15.3.11.13.1.5ColumnoutOfSrvScanGrpChannelDwellTimeread-createcurrentDwell time in mili-second for performing scanning.
1.3.6.1.4.1.4329.15.3.11.13.1.6ColumnoutOfSrvScanGrpScanTimeIntervalread-createcurrentTime interval between two sucssive scanning performed for this scan group.
1.3.6.1.4.1.4329.15.3.11.13.1.7ColumnoutOfSrvScanGrpSecurityScanread-createcurrentThis field allows to enable/disable security Scan.
1.3.6.1.4.1.4329.15.3.11.13.1.8ColumnoutOfSrvScanGrpScanActivityread-createcurrentScaning can be started or stopped using this field.
1.3.6.1.4.1.4329.15.3.11.13.1.9ColumnoutOfSrvScanGrpScanRowStatusread-createcurrentRowStatus field for the entry.
1.3.6.1.4.1.4329.15.3.11.14TablescanGroupAPAssignmentTablenot-accessiblecurrentThe list of APs that have been assigned to a particular scan group, which could include in-service and out-of-service scanning groups.
1.3.6.1.4.1.4329.15.3.11.14.1RowscanGroupAPAssignmentEntrynot-accessiblecurrentAn entry in this table defining an AP assignment to a group, identified by scanGroupProfileID.
1.3.6.1.4.1.4329.15.3.11.14.1.1ColumnscanGroupAPAssignApSerialread-onlycurrentUnique string of characters, a 16-character long, serial number of an access point.
1.3.6.1.4.1.4329.15.3.11.14.1.2ColumnscanGroupAPAssignGroupNameread-onlycurrentHuman readable textual description identifying scan group.
1.3.6.1.4.1.4329.15.3.11.14.1.3ColumnscanGroupAPAssignNameread-onlycurrentAccess Point (AP) name associated to this scan group.
1.3.6.1.4.1.4329.15.3.11.14.1.4ColumnscanGroupAPAssignRadio1read-writecurrentThis field allows the radio #1 of the AP to be turned on/off. this field has meaning only the AP assigned to legacy (outOfScan) scan profile
1.3.6.1.4.1.4329.15.3.11.14.1.5ColumnscanGroupAPAssignRadio2read-writecurrentThis field allows the radio #2 of the AP to be turned on/off. this field has meaning only the AP assigned to legacy (outOfScan) scan profile
1.3.6.1.4.1.4329.15.3.11.14.1.6ColumnscanGroupAPAssignInactiveAPread-writecurrentThis field allows to set the AP as active/inactive in scanning activities.
1.3.6.1.4.1.4329.15.3.11.14.1.7ColumnscanGroupAPAssignAllowScanningread-writecurrentSetting scanning to active/inactive using this AP.
1.3.6.1.4.1.4329.15.3.11.14.1.8ColumnscanGroupAPAssignAllowSpectrumAnalysisread-writecurrentSetting spectrum analysis to active/inactive using this AP.
1.3.6.1.4.1.4329.15.3.11.14.1.9ColumnscanGroupAPAssignControllerIPAddressread-writecurrentThe IP address of the controller to which the AP is connected currently.
1.3.6.1.4.1.4329.15.3.11.14.1.10ColumnscanGroupAPAssignFordwardingServiceread-onlycurrentThis OID lists the types of forwarding services that each Guardian is assigned to. A Guardian will revert to providing these services when it is removed from t…
1.3.6.1.4.1.4329.15.3.11.15TablescanAPTablenot-accessiblecurrentTable of sacn APs on each collector. This table can be viewed only in v3 mode when the mitigator analys engine is enabled.
1.3.6.1.4.1.4329.15.3.11.15.1RowscanAPEntrynot-accessiblecurrentAn entry in this table identifying one access point.
1.3.6.1.4.1.4329.15.3.11.15.1.1ColumnscanAPControllerIPAddressread-onlycurrentIP address of the controller on which the scanning executed.
1.3.6.1.4.1.4329.15.3.11.15.1.2ColumnscanAPSerialNumberread-onlycurrentSerial number of the access point, 16-character human readable text, that is assigned to this group.
1.3.6.1.4.1.4329.15.3.11.15.1.3ColumnscanAPAcessPointNameread-createcurrentName of the access point belonging to this group.
1.3.6.1.4.1.4329.15.3.11.15.1.4ColumnscanAPRowStatusread-createcurrentRow status for the entry.
1.3.6.1.4.1.4329.15.3.11.15.1.5ColumnscanAPProfileNameread-createcurrentName of the scan profile to which this access point is assigned.
1.3.6.1.4.1.4329.15.3.11.15.1.6ColumnscanAPProfileTyperead-createcurrentinServiceScan(1): access point is performed In service Scan. guardianScan(2): access point is performed Guardian Scan. outOfServiceScan(3): access point is per…
1.3.6.1.4.1.4329.15.3.11.16TablefriendlyAPTablenot-accessiblecurrentList of Access Points that have been categorized as not being any threat to the wireless network that is managed by EWC. This table can be viewed only in v3 mo…
1.3.6.1.4.1.4329.15.3.11.16.1RowfriendlyAPEntrynot-accessiblecurrentAn entry in this table identifying an access points and some of its attributes.
1.3.6.1.4.1.4329.15.3.11.16.1.1ColumnfriendlyAPMacAddressread-writecurrentEthernet MAC address of the access point.
1.3.6.1.4.1.4329.15.3.11.16.1.2ColumnfriendlyAPSSIDread-writecurrentSSID broadcasted by the access point.
1.3.6.1.4.1.4329.15.3.11.16.1.3ColumnfriendlyAPDescriptionread-writecurrentTextual description that is used to identify the access point.
1.3.6.1.4.1.4329.15.3.11.16.1.4ColumnfriendlyAPManufacturerread-onlycurrentTextual description identifying the access point manufacturer.
1.3.6.1.4.1.4329.15.3.11.17TableuncategorizedAPTablenot-accessiblecurrentList of APs that have not been categorized either as friendly, threat or authorized.
1.3.6.1.4.1.4329.15.3.11.17.1RowuncategorizedAPEntrynot-accessiblecurrentAn entry about an AP in this table.
1.3.6.1.4.1.4329.15.3.11.17.1.1ColumnuncategorizedAPMACnot-accessiblecurrentMAC address of access point.
1.3.6.1.4.1.4329.15.3.11.17.1.2ColumnuncategorizedAPDescptionread-onlycurrentTextual description of access point.
1.3.6.1.4.1.4329.15.3.11.17.1.3ColumnuncategorizedAPManufacturerread-onlycurrentAccess point manufacturer.
1.3.6.1.4.1.4329.15.3.11.17.1.4ColumnuncategorizedAPClassifyread-writecurrentBy setting this field, access point can be reclassified and moved to different group.
1.3.6.1.4.1.4329.15.3.11.17.1.5ColumnuncategorizedAPSSIDread-onlycurrentSSID broadcasted by the access point.
1.3.6.1.4.1.4329.15.3.11.18TableauthorizedAPTablenot-accessiblecurrentList of authorized access point.
1.3.6.1.4.1.4329.15.3.11.18.1RowauthorizedAPEntrynot-accessiblecurrentAn entry in this table describing an authorized AP.
1.3.6.1.4.1.4329.15.3.11.18.1.1ColumnauthorizedAPMACnot-accessiblecurrentMAC address of access point.
1.3.6.1.4.1.4329.15.3.11.18.1.2ColumnauthorizedAPDescriptionread-createcurrentDiscription of the access point.
1.3.6.1.4.1.4329.15.3.11.18.1.3ColumnauthorizedAPManufacturerread-createcurrentAccess point's manufacturer. This field is cannot be set and it is deduced by MAC addressed.
1.3.6.1.4.1.4329.15.3.11.18.1.4ColumnauthorizedAPClassifyread-createcurrentBy setting this field, access point can be reclassified and moved to different group.
1.3.6.1.4.1.4329.15.3.11.18.1.5ColumnauthorizedAPRowStatusread-createcurrentAction permitted are 'delete/add' row.
1.3.6.1.4.1.4329.15.3.11.19TableprohibitedAPTablenot-accessiblecurrentList of prohibited access points.
1.3.6.1.4.1.4329.15.3.11.19.1RowprohibitedAPEntrynot-accessiblecurrentAn entry in this table describing an access point.
1.3.6.1.4.1.4329.15.3.11.19.1.1ColumnprohibitedAPMACnot-accessiblecurrentMAC address of access point.
1.3.6.1.4.1.4329.15.3.11.19.1.2ColumnprohibitedAPCategoryread-createcurrentThe category the access point in this row belongs to.
1.3.6.1.4.1.4329.15.3.11.19.1.3ColumnprohibitedAPDescriptionread-createcurrentDescription of the access point.
1.3.6.1.4.1.4329.15.3.11.19.1.4ColumnprohibitedAPManufacturerread-createcurrentAccess point's manufacturer. This field is cannot be set and it is deduced by MAC addressed.
1.3.6.1.4.1.4329.15.3.11.19.1.5ColumnprohibitedAPClassifyread-createcurrentBy setting this field, access point can be reclassified and moved to different group.
1.3.6.1.4.1.4329.15.3.11.19.1.6ColumnprohibitedAPRowStatusread-createcurrentAction permitted are 'delete/add' row.
1.3.6.1.4.1.4329.15.3.11.20TablededicatedScanGroupTablenot-accessiblecurrentdedicated scan group enables the subsystem full time scan for threats based on 37xx-based APs. The threats are discovered and identified in the deployment envi…
1.3.6.1.4.1.4329.15.3.11.20.1RowdedicatedScanGroupEntrynot-accessiblecurrentAn entry in this table that defines attributes of a dedicated scan group.
1.3.6.1.4.1.4329.15.3.11.20.1.1ColumndedicatedScanGrpNameread-createcurrentTextual description identifying the scan group.
1.3.6.1.4.1.4329.15.3.11.20.1.2ColumndedicatedScanGrpSecurityThreatsread-createcurrentEnable/disable security engine to scan for threats.
1.3.6.1.4.1.4329.15.3.11.20.1.3ColumndedicatedScanGrpMaxConcurrentAttacksPerAPread-createcurrentMax number of concurrent attacks per AP
1.3.6.1.4.1.4329.15.3.11.20.1.4ColumndedicatedScanGrpCounterMeasuresread-createcurrentbit 0: Setting this bit prevents authorized stations from roaming to external honeypot APs. bit 1: Setting this bit prevents authorized stations from roaming t…
1.3.6.1.4.1.4329.15.3.11.20.1.5ColumndedicatedScanGrpScan2400MHzFreqread-createcurrentbit 0: by setting this bit scanning is performed on 2412 MHz frequency channel bit 1: by setting this bit scanning is performed on 2417 MHz frequency channel b…
1.3.6.1.4.1.4329.15.3.11.20.1.6ColumndedicatedScanGrpScan5GHzFreqread-createcurrentbit 0: by setting this bit scanning is performed on 5040 MHz frequency channel bit 1: by setting this bit scanning is performed on 5060 MHz frequency channel b…
1.3.6.1.4.1.4329.15.3.11.20.1.7ColumndedicatedScanGrpBlockAdHocPeriodread-createcurrentNumber of seconds removing network access to the clients that are in ad hoc mode.
1.3.6.1.4.1.4329.15.3.11.20.1.8ColumndedicatedScanGrpClassifySourceIFread-createcurrentThis variable allows to enable/disable classify sources of interference
1.3.6.1.4.1.4329.15.3.11.20.1.9ColumndedicatedScanGrpRowStatusread-createcurrentRowStatus field for creation/deletion or changing row status.
1.3.6.1.4.1.4329.15.3.11.20.1.10ColumndedicatedScanGrpDetectRogueAPread-createcurrentThis enables/disables rogue AP detection.
1.3.6.1.4.1.4329.15.3.11.20.1.11ColumndedicatedScanGrpListeningPortread-createcurrentThis variable has meaning only when dedicatedScanGrpDetectRogueAP is enabled. The port number is the port for listening for rogue AP detection.
1.3.6.1.4.1.4329.15.3.11.30NodewidsWipsReport
1.3.6.1.4.1.4329.15.3.11.30.1TableactiveThreatTablenot-accessiblecurrentList of active threats that have been discovered to this point of time.
1.3.6.1.4.1.4329.15.3.11.30.1.1RowactiveThreatEntrynot-accessiblecurrentAn entry in this table describing an idividual threat charactersitics and attributes.
1.3.6.1.4.1.4329.15.3.11.30.1.1.1ColumnactiveThreatIndexnot-accessiblecurrentInternally generated number without any significat meaning except used as indexing in this table.
1.3.6.1.4.1.4329.15.3.11.30.1.1.2ColumnactiveThreatCategoryread-onlycurrentTextual description describing the type of the threat.
1.3.6.1.4.1.4329.15.3.11.30.1.1.3ColumnactiveThreatDeviceMACread-onlycurrentMAC address of the device that the threat appears to be originated.
1.3.6.1.4.1.4329.15.3.11.30.1.1.4ColumnactiveThreatDateTimeread-onlycurrentDate and time the threat was discovered.
1.3.6.1.4.1.4329.15.3.11.30.1.1.5ColumnactiveThreatCounterMeasureread-onlycurrentCounter measure has been taken to tackle the threat.
1.3.6.1.4.1.4329.15.3.11.30.1.1.6ColumnactiveThreatAPNameread-onlycurrentName of the access point.
1.3.6.1.4.1.4329.15.3.11.30.1.1.7ColumnactiveThreatRSSread-onlycurrentSignal strength of the device considered to be a threat.
1.3.6.1.4.1.4329.15.3.11.30.1.1.8ColumnactiveThreatExtraDetailsread-onlycurrentExtra comments related to the threat.
1.3.6.1.4.1.4329.15.3.11.30.1.1.9ColumnactiveThreatThreatread-onlycurrentTextual description of the threat.
1.3.6.1.4.1.4329.15.3.11.30.2TablecountermeasureAPTablenot-accessiblecurrentList of APs engaged in countermeasure activities to thwart coming threats.
1.3.6.1.4.1.4329.15.3.11.30.2.1RowcountermeasureAPEntrynot-accessiblecurrentAn entry in this table identifying an AP engaged in countermeasure activities.
1.3.6.1.4.1.4329.15.3.11.30.2.1.1ColumncountermeasureAPThreatIndexnot-accessiblecurrentInternally generated index of the access point taking part in countermeasure.
1.3.6.1.4.1.4329.15.3.11.30.2.1.2ColumncountermeasureAPSerialread-onlycurrentSerial number of the access point taking part in countermeasure.
1.3.6.1.4.1.4329.15.3.11.30.2.1.3ColumncountermeasureAPNameread-onlycurrentName of the access point taking part in countermeasure.
1.3.6.1.4.1.4329.15.3.11.30.2.1.4ColumncountermeasureAPThreatCategoryread-onlycurrentTextual description of the threat category that countermeasure action is aimed at.
1.3.6.1.4.1.4329.15.3.11.30.2.1.5ColumncountermeasureAPCountermeasureread-onlycurrentCountermeasure has been taken to thwart the threat.
1.3.6.1.4.1.4329.15.3.11.30.2.1.6ColumncountermeasureAPTimeread-onlycurrentThe time that the countermeasure has started.
1.3.6.1.4.1.4329.15.3.11.30.3TableblacklistedClientTablenot-accessiblecurrentList of clients that have been blacklisted due to preceived threats they may pose to the safe functioning of the operating network.
1.3.6.1.4.1.4329.15.3.11.30.3.1RowblacklistedClientEntrynot-accessiblecurrentAn entry in this table pertaining information about the MU that has been blacklisted.
1.3.6.1.4.1.4329.15.3.11.30.3.1.1ColumnblacklistedClientMACread-onlycurrentMAC address of the client.
1.3.6.1.4.1.4329.15.3.11.30.3.1.2ColumnblacklistedClientStatTimeread-onlycurrentThe time blacklisting started.
1.3.6.1.4.1.4329.15.3.11.30.3.1.3ColumnblacklistedClientEndTimeread-onlycurrentThe time blacklisting ends.
1.3.6.1.4.1.4329.15.3.11.30.3.1.4ColumnblacklistedClientReasonread-onlycurrentReason for blacklisting the client.
1.3.6.1.4.1.4329.15.3.11.30.4TablethreatSummaryTablenot-accessiblecurrentSummary of all threats that have been detected in the network by wireless controller system.
1.3.6.1.4.1.4329.15.3.11.30.4.1RowthreatSummaryEntrynot-accessiblecurrentAn entry summarizing statistics about a category of a threat.
1.3.6.1.4.1.4329.15.3.11.30.4.1.1ColumnthreatSummaryIndexnot-accessiblecurrentInternally generated index.
1.3.6.1.4.1.4329.15.3.11.30.4.1.2ColumnthreatSummaryCategoryread-onlycurrentTextul description identifying the category of a threat.
1.3.6.1.4.1.4329.15.3.11.30.4.1.3ColumnthreatSummaryActiveThreatread-onlycurrentCounts of threats that are currently active.
1.3.6.1.4.1.4329.15.3.11.30.4.1.4ColumnthreatSummaryHistoricalCountsread-onlycurrentHistorical counts of such threat that were detected in the past by the wireless controller system.
1.3.6.1.4.1.4329.15.3.19NodeapNotifications
1.3.6.1.4.1.4329.15.3.19.1ScalarapEventIdread-writecurrentIdentifies event associated with AP or AP tunnel: apPollTimeout - an event triggered when the AP disconnects from the controller. apRegister - an event trigger…
1.3.6.1.4.1.4329.15.3.19.2ScalarapEventDescriptionread-onlycurrentContains the description of the most recently triggered event.
1.3.6.1.4.1.4329.15.3.19.3ScalarapEventAPSerialNumberread-onlycurrent16-character serial number of the AP.
1.3.6.1.4.1.4329.15.3.19.4NotificationapTunnelAlarmcurrentalarm associated with AP and AP interface.
1.3.6.1.4.1.4329.15.3.20NodestationSessionNotifications
1.3.6.1.4.1.4329.15.3.20.1ScalarstationEventTyperead-onlycurrentstation event type include: registration(0): MU registration. deRegistration(1): MU de-registration. stateChange(2): MU state changed. registrationFailed(3): M…
1.3.6.1.4.1.4329.15.3.20.2ScalarstationMacAddressread-onlycurrentMAC address of the station that is the subject of this event report.
1.3.6.1.4.1.4329.15.3.20.3ScalarstationIPAddressread-onlycurrentIP address of the station that is the subject of this event report.
1.3.6.1.4.1.4329.15.3.20.4ScalarstationAPNameread-onlycurrentname of the AP which station associated with
1.3.6.1.4.1.4329.15.3.20.5ScalarstationAPSSIDread-onlycurrentSSID broadcasted by the access point which station connected to
1.3.6.1.4.1.4329.15.3.20.6ScalarstationDetailEventread-onlycurrentdetail description of the station event
1.3.6.1.4.1.4329.15.3.20.7ScalarstationRoamedAPNameread-onlycurrentname of the access point which station roamed from
1.3.6.1.4.1.4329.15.3.20.8ScalarstationNameread-onlycurrentname of station
1.3.6.1.4.1.4329.15.3.20.9ScalarstationBSSIDread-onlycurrentthe Mac address of the radio which station connect to
1.3.6.1.4.1.4329.15.3.20.10ScalarstationEventTimeStampread-onlycurrentThe duration in hundredths of a second from the network agent start time to the time of generation of the station event.
1.3.6.1.4.1.4329.15.3.20.11NotificationstationEventAlarmcurrentA trap describing a significant event that happened to a station during a session on the network. A controller can sees hundreds or even thousands of these eve…
1.3.6.1.4.1.4329.15.3.20.12ScalarstationIPv6Address1read-onlycurrentOne of the IPv6 addresses of the station that is the subject of this event report.
1.3.6.1.4.1.4329.15.3.20.13ScalarstationIPv6Address2read-onlycurrentOne of the IPv6 addresses of the station that is the subject of this event report.
1.3.6.1.4.1.4329.15.3.20.14ScalarstationIPv6Address3read-onlycurrentOne of the IPv6 addresses of the station that is the subject of this event report.
1.3.6.1.4.1.4329.15.3.30NodehiPathWirelessHWCConformance
1.3.6.1.4.1.4329.15.3.30.1CompliancehiPathWirelessHWCModulecurrentConformance definition for the EWC MIB.
1.3.6.1.4.1.4329.15.3.30.2GrouphiPathWirelessHWCGroupcurrentConformance groups.
1.3.6.1.4.1.4329.15.3.30.3GrouphiPathWirelessHWCAlarmscurrentConformance information for the alarm groups.
1.3.6.1.4.1.4329.15.3.30.4GrouphiPathWirelessHWCObsoleteobsoleteList of object that EWC does not anymore support.
1.3.6.1.4.1.4329.15.3.30.5NodewirelessEWCGroups
1.3.6.1.4.1.4329.15.3.30.5.1GroupphysicalPortsGroupdeprecatedPhysical ports and their attributes.
1.3.6.1.4.1.4329.15.3.30.5.2GroupphyDHCPRangeGroupdeprecatedDHCP objects and attributes associated to physical ports.
1.3.6.1.4.1.4329.15.3.30.5.3GrouplayerTwoPortGroupcurrentCollection of layer two ports objects.
1.3.6.1.4.1.4329.15.3.30.5.4GroupmuGroupcurrentMU attributes associated to EWC.
1.3.6.1.4.1.4329.15.3.30.5.5GroupapStatsGroupcurrentCollection of objects and attributes related to AP statistics.
1.3.6.1.4.1.4329.15.3.30.5.6GroupmuACLGroupcurrentList of objects for creation of blacklist/whitelist.
1.3.6.1.4.1.4329.15.3.30.5.7GroupsiteGroupcurrentA collection of objects providing Site creation and its attributes.
1.3.6.1.4.1.4329.15.3.30.5.8GroupsitePolicyGroupcurrentObjects defining the association of policies to sites.
1.3.6.1.4.1.4329.15.3.30.5.9GroupsiteCosGroupcurrentObjects defining the association of policies to sites.
1.3.6.1.4.1.4329.15.3.30.5.10GroupsiteAPGroupcurrentObjects defining the association of policies to sites.
1.3.6.1.4.1.4329.15.3.30.5.11GroupsiteWlanGroupcurrentObjects defining the association of policies to sites.
1.3.6.1.4.1.4329.15.3.30.5.12GroupapGroupcurrentList of objects defining configuration attributes of an AP.
1.3.6.1.4.1.4329.15.3.30.5.13GroupwlanGroupcurrentList of objects defining configuration attributes of a WLAN.
1.3.6.1.4.1.4329.15.3.30.5.14GroupwlanStatsGroupcurrentList of objects defining configuration attributes of a WLAN.
1.3.6.1.4.1.4329.15.3.30.5.15GrouptopologyGroupcurrentList of objects defining configuration attributes of a WLAN.
1.3.6.1.4.1.4329.15.3.30.5.16GrouptopologyStatGroupcurrentList of objects for defining topology statics.
1.3.6.1.4.1.4329.15.3.30.5.17GrouploadGroupcurrentA collection of objects providing Load Group creation and its attributes.
1.3.6.1.4.1.4329.15.3.30.5.18GroupwidsWipsObjectsGroupcurrentObjects defining the state of WIDS-WIPS for the controller.
1.3.6.1.4.1.4329.15.3.30.5.19GroupwidsWipsEngineGroupcurrentSet of objects defining attributes of a WIDS-WIPS engine.
1.3.6.1.4.1.4329.15.3.30.5.20GroupoutOfServiceScanGroupcurrentList of objects for defining out-of-service scan group.
1.3.6.1.4.1.4329.15.3.30.5.21GroupinServiceScanGroupcurrentList of objects for defining in-service scan group.
1.3.6.1.4.1.4329.15.3.30.5.22GroupscanGroupAPAssignmentGroupcurrentList of objects for assignment of AP to scan group.
1.3.6.1.4.1.4329.15.3.30.5.23GroupscanAPGroupcurrentList of objects for defining AP scan groups in EWC.
1.3.6.1.4.1.4329.15.3.30.5.24GroupfriendlyAPGroupcurrentList of objects defining friendly APs identified during scanning time.
1.3.6.1.4.1.4329.15.3.30.5.25GroupwlanSecurityReportGroupcurrentSet of objects defining attributes of security group report.
1.3.6.1.4.1.4329.15.3.30.5.26GroupapAntennaGroupcurrentA collection of objects defining an antenna attributes for an AP.
1.3.6.1.4.1.4329.15.3.30.5.27GroupmuAccessListGroupcurrentList of objects for creation of MU access list to block MU access, case of black list, or allow access, case of white list to wireless controller resources.
1.3.6.1.4.1.4329.15.3.30.5.28GroupactiveThreatGroupcurrentList of objects defining a discovered security threat.
1.3.6.1.4.1.4329.15.3.30.5.29GroupcountermeasureAPGroupcurrentList of objects defining APs taking part in countermeasure activities to thwart incoming threats.
1.3.6.1.4.1.4329.15.3.30.5.30GroupblaclistedClientGroupcurrentList of objects identifying blacklisted clients.
1.3.6.1.4.1.4329.15.3.30.5.31GroupthreatSummaryGroupcurrentList of objects defining attributes of known discovered threat.
1.3.6.1.4.1.4329.15.3.30.5.32GrouplicensingInformationGroupcurrentList of objects providing licensing information for the controller system.
1.3.6.1.4.1.4329.15.3.30.5.33GroupstationsByProtocolGroupcurrentList of objects for aggregated MUs on a specific wireless channel.
1.3.6.1.4.1.4329.15.3.30.5.34GroupapByChannelGroupcurrentList of objects for aggregated access points on a wireless channel.
1.3.6.1.4.1.4329.15.3.30.5.35GroupuncategorizedAPGroupcurrentObjects defining uncategorized access points discovered by Radar application.
1.3.6.1.4.1.4329.15.3.30.5.36GroupauthorizedAPGroupcurrentObjects defining authorized access points discovered by Radar application.
1.3.6.1.4.1.4329.15.3.30.5.37GroupprohibitedAPGroupcurrentObjects defining prohibited access points discovered by Radar application.
1.3.6.1.4.1.4329.15.3.30.5.38GroupdedicatedScanGroupcurrentList of objects for defining dedicated scan group.
1.3.6.1.4.1.4329.15.3.30.5.39GroupapRadioAntennaGroupcurrentA collection of objects defining an antenna attributes for an AP.
1.3.6.1.4.1.4329.15.3.30.5.40GroupradiusFastFailoverEventsGroupcurrentList of objects for defining radius FastFailoverEvents.
1.3.6.1.4.1.4329.15.3.30.5.41GroupdhcpRelayListenersGroupcurrentList of objects for defining dhcpRelayListeners.
1.3.6.1.4.1.4329.15.3.30.5.42GroupauthenticationAdvancedGroupcurrentList of objects for defining authenticationAdvanced.
1.3.6.1.4.1.4329.15.3.30.5.43GroupradiusExtnsSettingGroupcurrentList of objects for defining radiusExtnsSetting.
1.3.6.1.4.1.4329.15.5.2IdentityhiPathWirelessControllerMibThe access controller MIB
Type Definitions
NameSyntaxStatusDescription
HundredthOfGauge32Gauge32currentThis textual convention represents a hundredth of a gauge number.
HundredthOfGauge64Counter64currentThis textual convention represents a hundredth of a 64-bit gauge number.
HundredthOfInt32Integer32currentThis textual convention represents a hundredth of an integer number.
LogEventSeverityINTEGER { critical(1), major(2), minor(3), information(4), trace(5) }currentThe log event severities used in the access controller.
MIB Viewer