HIRSCHMANN-BAT-C-MIB
48 objects
Hirschmann BAT-C
Imported Objects
| SNMPv2-SMI | enterprises Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE |
| SNMPv2-TC | DisplayString MacAddress TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.248 | Nodehirschmann | |||
| 1.3.6.1.4.1.248.1 | NodehmComponents | |||
| 1.3.6.1.4.1.248.1.1 | TablehmComponentsTable | not-accessible | current | Table of descriptive information about the available components of the product group. |
| 1.3.6.1.4.1.248.1.1.1 | RowhmComponentsEntry | not-accessible | current | An entry in the table, containing information about a single component (product). |
| 1.3.6.1.4.1.248.1.1.1.1 | ColumnhmComponentsIndex | read-only | current | This object identifies the component for which this entry contains information. |
| 1.3.6.1.4.1.248.1.1.1.2 | ColumnhmComponentsName | read-only | current | This object contains the component name. |
| 1.3.6.1.4.1.248.1.1.1.3 | ColumnhmComponentsDescr | read-only | current | This object contains the component description. |
| 1.3.6.1.4.1.248.1.1.1.4 | ColumnhmComponentsURL | read-only | current | This object contains the URL of component's web page. |
| 1.3.6.1.4.1.248.1.1.1.5 | ColumnhmComponentsOrderNumber | read-only | current | This object contains the component order number. |
| 1.3.6.1.4.1.248.2 | NodehmFirmware | |||
| 1.3.6.1.4.1.248.2.1 | ScalarhmFirmwareVersion | read-only | current | This object represents the version string of the firmware release. |
| 1.3.6.1.4.1.248.2.2 | ScalarhmFirmwareState | read-only | current | This object represent the current status string of the firmware release. |
| 1.3.6.1.4.1.248.2.3 | ScalarhmFirmwareDate | read-only | current | This object represent the compiling date string of the firmware release. |
| 1.3.6.1.4.1.248.2.4 | ScalarhmFirmwareTime | read-only | current | This object represent the compiling time string of the firmware release. |
| 1.3.6.1.4.1.248.2.5 | ScalarhmFirmwareCopyright | read-only | current | This object represent the current copyright string of the firmware release like next: 2008 Copyright by hirschmann AB |
| 1.3.6.1.4.1.248.3 | NodehmNet | |||
| 1.3.6.1.4.1.248.3.1 | ScalarhmNetPhyAddress | read-only | current | The Ethernet MAC address of the device. |
| 1.3.6.1.4.1.248.3.2 | ScalarhmNetIpAddress | read-write | current | The ip address of this device. Changing this object will not take effect until after a reset. |
| 1.3.6.1.4.1.248.3.3 | ScalarhmNetSubnetmask | read-write | current | The subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits … |
| 1.3.6.1.4.1.248.3.4 | ScalarhmNetGwIpAddress | read-write | current | IP address of the default gateway. Changing this object will not take effect until after a reset. |
| 1.3.6.1.4.1.248.3.7 | ScalarhmNetAssignment | read-write | current | Kind of the IP address assignment. Changing this object will not take effect until after a reset. |
| 1.3.6.1.4.1.248.5 | NodehmWLAN | |||
| 1.3.6.1.4.1.248.5.1 | NodehmWLANParameter | |||
| 1.3.6.1.4.1.248.5.1.1 | ScalarhmWLANParameterState | read-write | current | State of this interface. It may be enabled or disabled. |
| 1.3.6.1.4.1.248.5.1.3 | ScalarhmWLANParameterSSID | read-write | current | SSID (Service Set Identifier) for this interface. An SSID can be up to 32 characters long. Only letters, digits and the special characters: '@!$%&/()=?{}[]+*~#… |
| 1.3.6.1.4.1.248.5.1.4 | ScalarhmWLANParameterMode | read-only | current | Operation mode of this interface. 1=802.11a 2=802.11b 3=802.11b/g 4=802.11a/n 5=802.11g/n 6=802.11b/g/n 7=802.11a/b/g/n |
| 1.3.6.1.4.1.248.5.1.5 | ScalarhmWLANParameterChannel | read-write | current | Channel of this interface. This depends on your regional limitations and selected wlanMode. 0 means any channel. |
| 1.3.6.1.4.1.248.5.2 | NodehmWLANSecurity | |||
| 1.3.6.1.4.1.248.5.2.1 | ScalarhmWLANSecurityMode | read-write | current | Type of encryption of the wireless link. One of 'none', 'wpa-psk', 'wep64' or 'wep128'. If 'wpa-psk' is selected, the Encryption type will decide whether WPA o… |
| 1.3.6.1.4.1.248.5.2.2 | ScalarhmWLANSecurityWpaEncryptionAlgorithm | read-write | current | Encryption algorithm. 1=TKIP is used on old hardware not supporting AES. 2=AES is more secure and faster on station roaming. |
| 1.3.6.1.4.1.248.5.2.3 | ScalarhmWLANSecurityWpaPsk | read-write | current | Initial key for WPA encryption. NOTE: You should use a randomly generated alphanumeric sequence (up to 63 at least 8 characters) for maximum security. |
| 1.3.6.1.4.1.248.5.2.4 | ScalarhmWLANSecurityWepAuthType | read-write | current | 0=Open-System 1=Shared-Key 2=WPA-WPA2-PSK |
| 1.3.6.1.4.1.248.5.2.5 | ScalarhmWLANSecurityWepKeyEncoding | read-write | current | If this WEP passphrase is 'hex' or 'ascii'. |
| 1.3.6.1.4.1.248.5.2.6 | ScalarhmWLANSecurityWepKey | read-write | current | The WEP passphrase. |
| 1.3.6.1.4.1.248.5.3 | TablehmWLANVisibleAccessPointTable | not-accessible | current | Table of all VisibleAccessPoints to this interface. |
| 1.3.6.1.4.1.248.5.3.1 | RowhmWLANVisibleAccessPointEntry | not-accessible | current | An entry (conceptual row) in the wlanVisibleAccessPointTable. |
| 1.3.6.1.4.1.248.5.3.1.1 | ColumnhmWLANVisibleAccessPointEntryIdx | not-accessible | current | Index in the wlanVisibleAccessPointTableIf1. |
| 1.3.6.1.4.1.248.5.3.1.2 | ColumnhmWLANVisibleAccessPointEntrySNR | read-only | current | SNR of this visible access point. |
| 1.3.6.1.4.1.248.5.3.1.3 | ColumnhmWLANVisibleAccessPointEntryChannel | read-only | current | TX-Rate of this visible access point. |
| 1.3.6.1.4.1.248.5.3.1.4 | ColumnhmWLANVisibleAccessPointEntryPower | read-only | current | TX-Power of this visible access point. |
| 1.3.6.1.4.1.248.5.3.1.5 | ColumnhmWLANVisibleAccessPointEntrySSID | read-only | current | SSID of this visible access point. |
| 1.3.6.1.4.1.248.5.3.1.6 | ColumnhmWLANVisibleAccessPointEntrySecurity | read-only | current | Security of this visible access point. |
| 1.3.6.1.4.1.248.5.3.1.7 | ColumnhmWLANVisibleAccessPointEntryAddress | read-only | current | MAC address of this visible access point. |
| 1.3.6.1.4.1.248.5.3.1.8 | ColumnhmWLANVisibleAccessPointEntryConnected | read-only | current | SNR of this visible access point. |
| 1.3.6.1.4.1.248.5.3.1.9 | ColumnhmWLANVisibleAccessPointEntryRSSI | read-only | current | This object gives back the RSSI value, i.e. the signal strength of the visible AP. |
| 1.3.6.1.4.1.248.5.3.1.10 | ColumnhmWLANVisibleAccessPointEntryNoise | read-only | current | This value shows the noise floor for the connection to the visible AP. |
| 1.3.6.1.4.1.248.6 | IdentityhmModuleIdentity | Hirschmann BAT-C |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| EnabledDisabledStatus | INTEGER { disableStatus(0), enableStatus(1) } | current | This textual convention is used to some variables on the device that only permit two states. enableStatus : The status of the variable is enabled or true. disableStatus : The status of the variable is disabled or false |