HIRSCHMANN-PIM-MIB
76 objects
The Hirschmann Private Platform4 PIM MIB definitions for Platform devices.
Imported Objects
| HIRSCHMANN-MULTICAST-MIB | hmPlatform4Multicast |
| IF-MIB | InterfaceIndex |
| IPMROUTE-STD-MIB | ipMRouteGroup ipMRouteNextHopAddress ipMRouteNextHopGroup ipMRouteNextHopIfIndex ipMRouteNextHopSource ipMRouteNextHopSourceMask ipMRouteSource ipMRouteSourceMask |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks |
| SNMPv2-TC | RowStatus TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.248.15.4.99 | IdentityhmPIMMIB | The Hirschmann Private Platform4 PIM MIB definitions for Platform devices. | ||
| 1.3.6.1.4.1.248.15.4.99.1 | NodehmPIMMIBObjects | |||
| 1.3.6.1.4.1.248.15.4.99.1.0 | NodehmPIMTraps | |||
| 1.3.6.1.4.1.248.15.4.99.1.0.1 | NotificationhmPIMNeighborLoss | current | A hmPIMNeighborLoss trap signifies the loss of an adjacency with a neighbor. This trap should be generated when the neighbor timer expires, and the router has … | |
| 1.3.6.1.4.1.248.15.4.99.1.1 | NodehmPIM | |||
| 1.3.6.1.4.1.248.15.4.99.1.1.1 | ScalarhmPIMJoinPruneInterval | read-write | current | The default interval at which periodic PIM-SM Join/Prune messages are to be sent. |
| 1.3.6.1.4.1.248.15.4.99.1.1.2 | TablehmPIMInterfaceTable | not-accessible | current | The (conceptual) table listing the router's PIM interfaces. IGMP and PIM are enabled on all interfaces listed in this table. |
| 1.3.6.1.4.1.248.15.4.99.1.1.2.1 | RowhmPIMInterfaceEntry | not-accessible | current | An entry (conceptual row) in the hmPIMInterfaceTable. |
| 1.3.6.1.4.1.248.15.4.99.1.1.2.1.1 | ColumnhmPIMInterfaceIfIndex | not-accessible | current | The ifIndex value of this PIM interface. |
| 1.3.6.1.4.1.248.15.4.99.1.1.2.1.2 | ColumnhmPIMInterfaceAddress | read-only | current | The IP address of the PIM interface. |
| 1.3.6.1.4.1.248.15.4.99.1.1.2.1.3 | ColumnhmPIMInterfaceNetMask | read-only | current | The network mask for the IP address of the PIM interface. |
| 1.3.6.1.4.1.248.15.4.99.1.1.2.1.4 | ColumnhmPIMInterfaceMode | read-create | current | The configured mode of this PIM interface. A value of sparseDense is only valid for PIMv1. |
| 1.3.6.1.4.1.248.15.4.99.1.1.2.1.5 | ColumnhmPIMInterfaceDR | read-only | current | The Designated Router on this PIM interface. For point-to- point interfaces, this object has the value 0.0.0.0. |
| 1.3.6.1.4.1.248.15.4.99.1.1.2.1.6 | ColumnhmPIMInterfaceHelloInterval | read-create | current | The frequency at which PIM Hello messages are transmitted on this interface. |
| 1.3.6.1.4.1.248.15.4.99.1.1.2.1.7 | ColumnhmPIMInterfaceStatus | read-create | current | The status of this entry. Creating the entry enables PIM on the interface; destroying the entry disables PIM on the interface. |
| 1.3.6.1.4.1.248.15.4.99.1.1.2.1.8 | ColumnhmPIMInterfaceJoinPruneInterval | read-create | current | The frequency at which PIM Join/Prune messages are transmitted on this PIM interface. The default value of this object is the hmPIMJoinPruneInterval. |
| 1.3.6.1.4.1.248.15.4.99.1.1.2.1.9 | ColumnhmPIMInterfaceCBSRPreference | read-create | current | The preference value for the local interface as a candidate bootstrap router. The value of -1 is used to indicate that the local interface is not a candidate B… |
| 1.3.6.1.4.1.248.15.4.99.1.1.3 | TablehmPIMNeighborTable | not-accessible | current | The (conceptual) table listing the router's PIM neighbors. |
| 1.3.6.1.4.1.248.15.4.99.1.1.3.1 | RowhmPIMNeighborEntry | not-accessible | current | An entry (conceptual row) in the hmPIMNeighborTable. |
| 1.3.6.1.4.1.248.15.4.99.1.1.3.1.1 | ColumnhmPIMNeighborAddress | not-accessible | current | The IP address of the PIM neighbor for which this entry contains information. |
| 1.3.6.1.4.1.248.15.4.99.1.1.3.1.2 | ColumnhmPIMNeighborIfIndex | read-only | current | The value of ifIndex for the interface used to reach this PIM neighbor. |
| 1.3.6.1.4.1.248.15.4.99.1.1.3.1.3 | ColumnhmPIMNeighborUpTime | read-only | current | The time since this PIM neighbor (last) became a neighbor of the local router. |
| 1.3.6.1.4.1.248.15.4.99.1.1.3.1.4 | ColumnhmPIMNeighborExpiryTime | read-only | current | The minimum time remaining before this PIM neighbor will be aged out. |
| 1.3.6.1.4.1.248.15.4.99.1.1.3.1.5 | ColumnhmPIMNeighborMode | read-only | deprecated | The active PIM mode of this neighbor. This object is deprecated for PIMv2 routers since all neighbors on the interface must be either dense or sparse as determ… |
| 1.3.6.1.4.1.248.15.4.99.1.1.4 | TablehmPIMIpMRouteTable | not-accessible | current | The (conceptual) table listing PIM-specific information on a subset of the rows of the ipMRouteTable defined in the IP Multicast MIB. |
| 1.3.6.1.4.1.248.15.4.99.1.1.4.1 | RowhmPIMIpMRouteEntry | not-accessible | current | An entry (conceptual row) in the hmPIMIpMRouteTable. There is one entry per entry in the ipMRouteTable whose incoming interface is running PIM. |
| 1.3.6.1.4.1.248.15.4.99.1.1.4.1.1 | ColumnhmPIMIpMRouteUpstreamAssertTimer | read-only | current | The time remaining before the router changes its upstream neighbor back to its RPF neighbor. This timer is called the Assert timer in the PIM Sparse and Dense … |
| 1.3.6.1.4.1.248.15.4.99.1.1.4.1.2 | ColumnhmPIMIpMRouteAssertMetric | read-only | current | The metric advertised by the assert winner on the upstream interface, or 0 if no such assert is in received. |
| 1.3.6.1.4.1.248.15.4.99.1.1.4.1.3 | ColumnhmPIMIpMRouteAssertMetricPref | read-only | current | The preference advertised by the assert winner on the upstream interface, or 0 if no such assert is in effect. |
| 1.3.6.1.4.1.248.15.4.99.1.1.4.1.4 | ColumnhmPIMIpMRouteAssertRPTBit | read-only | current | The value of the RPT-bit advertised by the assert winner on the upstream interface, or false if no such assert is in effect. |
| 1.3.6.1.4.1.248.15.4.99.1.1.4.1.5 | ColumnhmPIMIpMRouteFlags | read-only | current | This object describes PIM-specific flags related to a multicast state entry. See the PIM Sparse Mode specification for the meaning of the RPT and SPT bits. |
| 1.3.6.1.4.1.248.15.4.99.1.1.5 | TablehmPIMRPTable | not-accessible | deprecated | The (conceptual) table listing PIM version 1 information for the Rendezvous Points (RPs) for IP multicast groups. This table is deprecated since its function i… |
| 1.3.6.1.4.1.248.15.4.99.1.1.5.1 | RowhmPIMRPEntry | not-accessible | deprecated | An entry (conceptual row) in the hmPIMRPTable. There is one entry per RP address for each IP multicast group. |
| 1.3.6.1.4.1.248.15.4.99.1.1.5.1.1 | ColumnhmPIMRPGroupAddress | not-accessible | deprecated | The IP multicast group address for which this entry contains information about an RP. |
| 1.3.6.1.4.1.248.15.4.99.1.1.5.1.2 | ColumnhmPIMRPAddress | not-accessible | deprecated | The unicast address of the RP. |
| 1.3.6.1.4.1.248.15.4.99.1.1.5.1.3 | ColumnhmPIMRPState | read-only | deprecated | The state of the RP. |
| 1.3.6.1.4.1.248.15.4.99.1.1.5.1.4 | ColumnhmPIMRPStateTimer | read-only | deprecated | The minimum time remaining before the next state change. When hmPIMRPState is up, this is the minimum time which must expire until it can be declared down. Whe… |
| 1.3.6.1.4.1.248.15.4.99.1.1.5.1.5 | ColumnhmPIMRPLastChange | read-only | deprecated | The value of sysUpTime at the time when the corresponding instance of hmPIMRPState last changed its value. |
| 1.3.6.1.4.1.248.15.4.99.1.1.5.1.6 | ColumnhmPIMRPRowStatus | read-create | deprecated | The status of this row, by which new entries may be created, or old entries deleted from this table. |
| 1.3.6.1.4.1.248.15.4.99.1.1.6 | TablehmPIMRPSetTable | not-accessible | current | The (conceptual) table listing PIM information for candidate Rendezvous Points (RPs) for IP multicast groups. When the local router is the BSR, this informatio… |
| 1.3.6.1.4.1.248.15.4.99.1.1.6.1 | RowhmPIMRPSetEntry | not-accessible | current | An entry (conceptual row) in the hmPIMRPSetTable. |
| 1.3.6.1.4.1.248.15.4.99.1.1.6.1.1 | ColumnhmPIMRPSetGroupAddress | not-accessible | current | The IP multicast group address which, when combined with hmPIMRPSetGroupMask, gives the group prefix for which this entry contains information about the Candid… |
| 1.3.6.1.4.1.248.15.4.99.1.1.6.1.2 | ColumnhmPIMRPSetGroupMask | not-accessible | current | The multicast group address mask which, when combined with hmPIMRPSetGroupAddress, gives the group prefix for which this entry contains information about the C… |
| 1.3.6.1.4.1.248.15.4.99.1.1.6.1.3 | ColumnhmPIMRPSetAddress | not-accessible | current | The IP address of the Candidate-RP. |
| 1.3.6.1.4.1.248.15.4.99.1.1.6.1.4 | ColumnhmPIMRPSetHoldTime | read-only | current | The holdtime of a Candidate-RP. If the local router is not the BSR, this value is 0. |
| 1.3.6.1.4.1.248.15.4.99.1.1.6.1.5 | ColumnhmPIMRPSetExpiryTime | read-only | current | The minimum time remaining before the Candidate-RP will be declared down. If the local router is not the BSR, this value is 0. |
| 1.3.6.1.4.1.248.15.4.99.1.1.6.1.6 | ColumnhmPIMRPSetComponent | not-accessible | current | A number uniquely identifying the component. Each protocol instance connected to a separate domain should have a different index value. |
| 1.3.6.1.4.1.248.15.4.99.1.1.7 | TablehmPIMIpMRouteNextHopTable | not-accessible | current | The (conceptual) table listing PIM-specific information on a subset of the rows of the ipMRouteNextHopTable defined in the IP Multicast MIB. |
| 1.3.6.1.4.1.248.15.4.99.1.1.7.1 | RowhmPIMIpMRouteNextHopEntry | not-accessible | current | An entry (conceptual row) in the hmPIMIpMRouteNextHopTable. There is one entry per entry in the ipMRouteNextHopTable whose interface is running PIM and whose i… |
| 1.3.6.1.4.1.248.15.4.99.1.1.7.1.2 | ColumnhmPIMIpMRouteNextHopPruneReason | read-only | current | This object indicates why the downstream interface was pruned, whether in response to a PIM prune message or due to PIM Assert processing. |
| 1.3.6.1.4.1.248.15.4.99.1.1.11 | TablehmPIMCandidateRPTable | not-accessible | current | The (conceptual) table listing the IP multicast groups for which the local router is to advertise itself as a Candidate-RP when the value of hmPIMComponentCRPH… |
| 1.3.6.1.4.1.248.15.4.99.1.1.11.1 | RowhmPIMCandidateRPEntry | not-accessible | current | An entry (conceptual row) in the hmPIMCandidateRPTable. |
| 1.3.6.1.4.1.248.15.4.99.1.1.11.1.1 | ColumnhmPIMCandidateRPGroupAddress | not-accessible | current | The IP multicast group address which, when combined with hmPIMCandidateRPGroupMask, identifies a group prefix for which the local router will advertise itself … |
| 1.3.6.1.4.1.248.15.4.99.1.1.11.1.2 | ColumnhmPIMCandidateRPGroupMask | not-accessible | current | The multicast group address mask which, when combined with hmPIMCandidateRPGroupMask, identifies a group prefix for which the local router will advertise itsel… |
| 1.3.6.1.4.1.248.15.4.99.1.1.11.1.3 | ColumnhmPIMCandidateRPAddress | read-create | current | The (unicast) address of the interface which will be advertised as a Candidate-RP. |
| 1.3.6.1.4.1.248.15.4.99.1.1.11.1.4 | ColumnhmPIMCandidateRPRowStatus | read-create | current | The status of this row, by which new entries may be created, or old entries deleted from this table. |
| 1.3.6.1.4.1.248.15.4.99.1.1.12 | TablehmPIMComponentTable | not-accessible | current | The (conceptual) table containing objects specific to a PIM domain. One row exists for each domain to which the router is connected. A PIM-SM domain is defined… |
| 1.3.6.1.4.1.248.15.4.99.1.1.12.1 | RowhmPIMComponentEntry | not-accessible | current | An entry (conceptual row) in the hmPIMComponentTable. |
| 1.3.6.1.4.1.248.15.4.99.1.1.12.1.1 | ColumnhmPIMComponentIndex | not-accessible | current | A number uniquely identifying the component. Each protocol instance connected to a separate domain should have a different index value. Routers that only suppo… |
| 1.3.6.1.4.1.248.15.4.99.1.1.12.1.2 | ColumnhmPIMComponentBSRAddress | read-only | current | The IP address of the bootstrap router (BSR) for the local PIM region. |
| 1.3.6.1.4.1.248.15.4.99.1.1.12.1.3 | ColumnhmPIMComponentBSRExpiryTime | read-only | current | The minimum time remaining before the bootstrap router in the local domain will be declared down. For candidate BSRs, this is the time until the component send… |
| 1.3.6.1.4.1.248.15.4.99.1.1.12.1.4 | ColumnhmPIMComponentCRPHoldTime | read-create | current | The holdtime of the component when it is a candidate RP in the local domain. The value of 0 is used to indicate that the local system is not a Candidate-RP. |
| 1.3.6.1.4.1.248.15.4.99.1.1.12.1.5 | ColumnhmPIMComponentStatus | read-create | current | The status of this entry. Creating the entry creates another protocol instance; destroying the entry disables a protocol instance. |
| 1.3.6.1.4.1.248.15.4.99.2 | NodehmPIMMIBConformance | |||
| 1.3.6.1.4.1.248.15.4.99.2.1 | NodehmPIMMIBCompliances | |||
| 1.3.6.1.4.1.248.15.4.99.2.1.1 | CompliancehmPIMV1MIBCompliance | deprecated | The compliance statement for routers running PIMv1 and implementing the PIM MIB. | |
| 1.3.6.1.4.1.248.15.4.99.2.1.2 | CompliancehmPIMSparseV2MIBCompliance | read-only | current | The compliance statement for routers running PIM Sparse Mode and implementing the PIM MIB. |
| 1.3.6.1.4.1.248.15.4.99.2.1.3 | CompliancehmPIMDenseV2MIBCompliance | read-only | current | The compliance statement for routers running PIM Dense Mode and implementing the PIM MIB. |
| 1.3.6.1.4.1.248.15.4.99.2.2 | NodehmPIMMIBGroups | |||
| 1.3.6.1.4.1.248.15.4.99.2.2.1 | GrouphmPIMNotificationGroup | current | A collection of notifications for signaling important PIM events. | |
| 1.3.6.1.4.1.248.15.4.99.2.2.2 | GrouphmPIMV2MIBGroup | current | A collection of objects to support management of PIM Sparse Mode (version 2) routers. | |
| 1.3.6.1.4.1.248.15.4.99.2.2.3 | GrouphmPIMV2CandidateRPMIBGroup | current | A collection of objects to support configuration of which groups a router is to advertise itself as a Candidate-RP. | |
| 1.3.6.1.4.1.248.15.4.99.2.2.4 | GrouphmPIMV1MIBGroup | deprecated | A collection of objects to support management of PIM (version 1) routers. | |
| 1.3.6.1.4.1.248.15.4.99.2.2.5 | GrouphmPIMDenseV2MIBGroup | current | A collection of objects to support management of PIM Dense Mode (version 2) routers. | |
| 1.3.6.1.4.1.248.15.4.99.2.2.6 | GrouphmPIMNextHopGroup | current | A collection of optional objects to provide per-next hop information for diagnostic purposes. Supporting this group may add a large number of instances to a tr… | |
| 1.3.6.1.4.1.248.15.4.99.2.2.7 | GrouphmPIMAssertGroup | current | A collection of optional objects to provide extra information about the assert election process. There is no protocol reason to keep such information, but some… |