HIRSCHMANN-ROUTER-MIB
62 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC1155-SMI | private |
| RFC1213-MIB | DisplayString PhysAddress |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1 | Nodeenterprises | |||
| 1.3.6.1.4.1.248 | Nodehirschmann | |||
| 1.3.6.1.4.1.248.14 | NodehmConfiguration | |||
| 1.3.6.1.4.1.248.14.6 | NodehmRouter | |||
| 1.3.6.1.4.1.248.14.6.1 | NodehmRouterMisc | |||
| 1.3.6.1.4.1.248.14.6.1.1 | ScalarhmRouterNumInterfaces | read-only | mandatory | The number of virtual router interfaces, i.e. the number of rows in hmRouterIfTable. |
| 1.3.6.1.4.1.248.14.6.1.2 | ScalarhmRouterMaxHostRouteEntries | read-only | mandatory | The maximum number of HOST entries in the routing table. |
| 1.3.6.1.4.1.248.14.6.1.3 | ScalarhmRouterMaxSubnetRouteEntries | read-only | mandatory | The maximum number of SUBNET entries in the routing table. |
| 1.3.6.1.4.1.248.14.6.1.4 | ScalarhmRouterRipEnable | read-write | mandatory | DURABLE: { false } This variable globally enables or disables RIP. Currently, RIP and OSPF cannot be enabled at the same time. |
| 1.3.6.1.4.1.248.14.6.1.5 | ScalarhmRouterOspfEnable | read-write | mandatory | DURABLE: { false } This variable globally enables or disables OSPF. Currently, RIP and OSPF cannot be enabled at the same time. |
| 1.3.6.1.4.1.248.14.6.1.6 | ScalarhmRouterDHCPServerIpAddr | read-write | mandatory | DURABLE: The IP address of the first DHCP-server to be addressed by the relay agent. If 0.0.0.0, DHCP relaying is switched off for this entry. |
| 1.3.6.1.4.1.248.14.6.1.7 | ScalarhmRouterDHCPServer2IpAddr | read-write | mandatory | DURABLE: The IP address of the second DHCP-server to be addressed by the relay agent. If 0.0.0.0, DHCP relaying is switched off for this entry. |
| 1.3.6.1.4.1.248.14.6.1.8 | ScalarhmRouterDHCPServer3IpAddr | read-write | mandatory | DURABLE: The IP address of the third DHCP-server to be addressed by the relay agent. If 0.0.0.0, DHCP relaying is switched off for this entry. |
| 1.3.6.1.4.1.248.14.6.1.9 | ScalarhmRouterDHCPServer4IpAddr | read-write | mandatory | DURABLE: The IP address of the fourth DHCP-server to be addressed by the relay agent. If 0.0.0.0, DHCP relaying is switched off for this entry. |
| 1.3.6.1.4.1.248.14.6.2 | TablehmRouterIfTable | not-accessible | mandatory | A table of interface parameters. There is one entry for each virtual router interface. |
| 1.3.6.1.4.1.248.14.6.2.1 | RowhmRouterIfEntry | not-accessible | mandatory | Parameters for a single virtual router interface. |
| 1.3.6.1.4.1.248.14.6.2.1.1 | ColumnhmRouterIfIndex | read-only | mandatory | Interface index of the virtual router interface. |
| 1.3.6.1.4.1.248.14.6.2.1.2 | ColumnhmRouterIfVlanID | read-write | mandatory | DURABLE: Vlan id to be used by the interface. |
| 1.3.6.1.4.1.248.14.6.2.1.3 | ColumnhmRouterIfIpAddr | read-write | mandatory | DURABLE: The IP address of the virtual router interface. The subnet address is calculated by logically AND'ing the IP address (hmRouterIfIpAddr) with the netma… |
| 1.3.6.1.4.1.248.14.6.2.1.4 | ColumnhmRouterIfSubnetMask | read-write | mandatory | DURABLE: Netmask of the subnet. It contains 1's in the bit positions for the subnet and 0's in the bit positions for the host. The 1's must be contiguous, star… |
| 1.3.6.1.4.1.248.14.6.2.1.5 | ColumnhmRouterIfName | read-write | mandatory | DURABLE: A user reference name for the interface. |
| 1.3.6.1.4.1.248.14.6.2.1.6 | ColumnhmRouterIfAdminStatus | read-write | mandatory | DURABLE: The desired state of the interface. Setting this object to up (down) enables (disables) the virtual router interface. |
| 1.3.6.1.4.1.248.14.6.2.1.7 | ColumnhmRouterIfOperStatus | read-only | mandatory | The current operational state of the interface. |
| 1.3.6.1.4.1.248.14.6.2.1.8 | ColumnhmRouterIfRedundantIpAddr | read-write | mandatory | DURABLE: The IP address of the redundant router interface which is residing on the partner router. If the partner router fails, the IP address is activated on … |
| 1.3.6.1.4.1.248.14.6.4 | TablehmRouterStaticTable | not-accessible | mandatory | The table of static routes (subset of the MIB-II ipRouteTable). |
| 1.3.6.1.4.1.248.14.6.4.1 | RowhmRouterStaticEntry | not-accessible | mandatory | A list of static route entries. |
| 1.3.6.1.4.1.248.14.6.4.1.1 | ColumnhmRouterStaticDestIpAddr | read-only | mandatory | DURABLE: Host or subnet IP destination address. |
| 1.3.6.1.4.1.248.14.6.4.1.2 | ColumnhmRouterStaticMask | read-write | mandatory | DURABLE: The mask for this IP destination. It contains 1's in the bit positions for the net and subnet IDs and 0's in the bit positions for host ID. The 1's mu… |
| 1.3.6.1.4.1.248.14.6.4.1.3 | ColumnhmRouterStaticNextHop | read-write | mandatory | DURABLE: The IP address of the next hop of this route. |
| 1.3.6.1.4.1.248.14.6.4.1.4 | ColumnhmRouterStaticRouteName | read-write | mandatory | DURABLE: A user reference name for this static route. |
| 1.3.6.1.4.1.248.14.6.4.1.5 | ColumnhmRouterStaticRouteType | read-write | mandatory | DURABLE: The type of route. See MIB-II, ipRouteType. Setting this object to the value invalid(2) removes the corresponding entry from hmRouterStaticTable and i… |
| 1.3.6.1.4.1.248.14.6.5 | NodehmRouterOptions | |||
| 1.3.6.1.4.1.248.14.6.5.1 | ScalarhmRouterIcmpTimeExceededMessage | read-write | mandatory | DURABLE: { enable } Controls whether an ICMP 'Time Exceeded' message will be generated when the TTL (Time To Live) field has expired. Due to RFC1812 (Router Re… |
| 1.3.6.1.4.1.248.14.6.6 | TablehmRouterStaticArpTable | not-accessible | mandatory | The table of static ARP entries |
| 1.3.6.1.4.1.248.14.6.6.1 | RowhmRouterStaticArpEntry | not-accessible | mandatory | A list of static ARP entries. |
| 1.3.6.1.4.1.248.14.6.6.1.1 | ColumnhmRouterStaticArpNetAddress | read-only | mandatory | DURABLE: The IpAddress corresponding to the media- dependent `physical' address. |
| 1.3.6.1.4.1.248.14.6.6.1.2 | ColumnhmRouterStaticArpPhysAddress | read-write | mandatory | DURABLE: The media-dependent `physical' address. |
| 1.3.6.1.4.1.248.14.6.6.1.3 | ColumnhmRouterStaticArpName | read-write | mandatory | DURABLE: A user reference name for this static ARP entry. |
| 1.3.6.1.4.1.248.14.6.6.1.4 | ColumnhmRouterStaticArpType | read-write | mandatory | DURABLE: The type of the ARP entry. See MIB-II, ipNetToMediaType. Setting this object to the value invalid(2) removes the corresponding entry from hmRouterStat… |
| 1.3.6.1.4.1.248.14.6.10 | NodehmRouterRedundancy | |||
| 1.3.6.1.4.1.248.14.6.10.1 | NodehmRouterRedConfiguration | |||
| 1.3.6.1.4.1.248.14.6.10.1 | NodehmRouterRedTransition | The Ring Redundancy mechanism has switched over | ||
| 1.3.6.1.4.1.248.14.6.10.1.1 | ScalarhmRouterRedPartnerIpAddress | read-write | mandatory | DURABLE: The IP address of the redundancy partner agent. |
| 1.3.6.1.4.1.248.14.6.10.1.2 | ScalarhmRouterRedPartnerInfo | read-only | mandatory | DURABLE: various configuration parameters of the partner agent |
| 1.3.6.1.4.1.248.14.6.10.1.3 | ScalarhmRouterRedMessageInterval | read-write | mandatory | DURABLE: time period in msec between test packets. |
| 1.3.6.1.4.1.248.14.6.10.1.4 | ScalarhmRouterRedMessageTimeout | read-write | mandatory | DURABLE: time period in msec before a failure is detected. the value should be at least 2 times the value of hmRouterRedMessageInterval. |
| 1.3.6.1.4.1.248.14.6.10.1.5 | ScalarhmRouterRedAdminStatus | read-write | mandatory | DURABLE: The desired state of the redundancy mechanism. Setting this object to enable (disable) enables (disables) the router redundancy. |
| 1.3.6.1.4.1.248.14.6.10.1.6 | ScalarhmRouterRedOperStatus | read-only | mandatory | The operational state of the redundancy mechanism. |
| 1.3.6.1.4.1.248.14.6.10.1.7 | ScalarhmRouterRedLastErrorMessage | read-only | mandatory | descripting text for the redundancy error state. |
| 1.3.6.1.4.1.248.14.6.10.1.8 | ScalarhmRouterRedErrorStatus | read-only | mandatory | The error state of the redundancy mechanism. If the value is error(2), there is an descripting error text given in hmRouterRedLastErrorMessage. |
| 1.3.6.1.4.1.248.14.6.10.2 | NodehmRouterRedConfigError | The configuration error status changed | ||
| 1.3.6.1.4.1.248.14.6.10.2 | NodehmRouterRedStats | |||
| 1.3.6.1.4.1.248.14.6.10.2.1 | ScalarhmRouterRedStatsTakeoverCount | read-only | mandatory | counts the times the redundancy switches over between the standby and active state |
| 1.3.6.1.4.1.248.14.6.10.2.2 | ScalarhmRouterRedStatsLastChange | read-only | mandatory | Time since system boot when there was a change in the operational state of the router redundancy between active and standby |
| 1.3.6.1.4.1.248.14.6.11 | NodehmRouterForwardControl | |||
| 1.3.6.1.4.1.248.14.6.11.1 | ScalarhmRouterForwardControlEnable | read-write | mandatory | DURABLE: { disable } enables or disables router interface based forwarding control. when disabled, the router forwards between all interfaces. |
| 1.3.6.1.4.1.248.14.6.11.10 | TablehmRouterForwardControlTable | not-accessible | mandatory | A table for the router interface based forwarding control. There is one entry for each virtual router interface. |
| 1.3.6.1.4.1.248.14.6.11.10.1 | RowhmRouterForwardControlEntry | not-accessible | mandatory | Parameters for a single virtual router interface. |
| 1.3.6.1.4.1.248.14.6.11.10.1.1 | ColumnhmRouterForwardControlIndex | not-accessible | mandatory | Interface index of the corresponding router interface. |
| 1.3.6.1.4.1.248.14.6.11.10.1.2 | ColumnhmRouterFCAllowedToGo | read-write | mandatory | DURABLE: interface set of the allowed destinations from this port. Each octet within the value of this object specifies a set of eight interfaces, with the fir… |
| 1.3.6.1.4.1.248.14.6.11.10.1.3 | ColumnhmRouterFCIngressRejects | read-only | mandatory | counts the frames which were received on this interface and were dropped according to the forwarding rules. |
| 1.3.6.1.4.1.248.14.6.11.10.1.4 | ColumnhmRouterFCEgressRejects | read-only | mandatory | counts the frames which were to be transmitted over this interface and werde dropped according to the forwarding rules. |