HM2-DEVMGMT-MIB
223 objects
Hirschmann Device Management MIB. Copyright (C) 2012. All Rights Reserved.
Imported Objects
| HM2-TC-MIB | hm2ConfigurationMibs HmEnabledStatus HmTimeSeconds1970 |
| IANAifType-MIB | IANAifType |
| IF-MIB | ifIndex InterfaceIndexOrZero |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.248.11.10 | Identityhm2DeviceMgmtMib | Hirschmann Device Management MIB. Copyright (C) 2012. All Rights Reserved. | ||
| 1.3.6.1.4.1.248.11.10.0 | Nodehm2DeviceMgmtMibNotifications | |||
| 1.3.6.1.4.1.248.11.10.0.1 | Notificationhm2SfpChangeTrap | current | This trap is sent when a SFP has been added or removed. It is also sent for an otherwise unsupported SFP. | |
| 1.3.6.1.4.1.248.11.10.0.2 | Notificationhm2AutoDisablePortTrap | current | This trap is sent if the port has been disabled or enabled by auto disable feature. | |
| 1.3.6.1.4.1.248.11.10.0.3 | Notificationhm2ModulePluggedTrap | current | This trap is sent if a module is plugged into a unit. | |
| 1.3.6.1.4.1.248.11.10.0.4 | Notificationhm2ModuleRemovedTrap | current | This trap is sent if a module is removed from a unit. | |
| 1.3.6.1.4.1.248.11.10.0.5 | Notificationhm2SFPRxPowerChangeTrap | current | This trap is sent when the state (hm2SfpCurrentRxPowerState) of the rx power of a SFP changes. | |
| 1.3.6.1.4.1.248.11.10.1 | Nodehm2DeviceMgmtMibObjects | |||
| 1.3.6.1.4.1.248.11.10.1.1 | Nodehm2DeviceMgmtGroup | |||
| 1.3.6.1.4.1.248.11.10.1.1.1 | Scalarhm2DevMgmtProductId | read-only | current | Manufacturer-defined product identifier (product family + product ID). Example:Objekt-ID 1.3.6.1.4.1.248.11.2.1.1 is the hm2ProductFamily EES and Objekt-ID 1.3… |
| 1.3.6.1.4.1.248.11.10.1.1.2 | Scalarhm2DevMgmtProductDescr | read-only | current | Manufacturer-defined product description. |
| 1.3.6.1.4.1.248.11.10.1.1.3 | Scalarhm2DevMgmtSerialNumber | read-only | current | Manufacturer-defined serial number of the device. |
| 1.3.6.1.4.1.248.11.10.1.2 | Nodehm2DeviceMgmtActionGroup | |||
| 1.3.6.1.4.1.248.11.10.1.2.1 | Scalarhm2DevMgmtActionReset | read-write | current | Setting the object to 'reset' has the same effect as a power-on sequence (cold start) Reading the object always returns 'other'. |
| 1.3.6.1.4.1.248.11.10.1.2.2 | Scalarhm2DevMgmtActionFlushFDB | read-write | current | Setting the object to 'flushFDB' will flush the forwarding database of the switch. Reading the object always returns 'other'. |
| 1.3.6.1.4.1.248.11.10.1.2.3 | Scalarhm2DevMgmtActionFlushARP | read-write | current | Setting the object to 'flushARP' will flush the ARP cache. Reading the object always returns 'other'. |
| 1.3.6.1.4.1.248.11.10.1.2.4 | Scalarhm2DevMgmtActionFlushIGS | read-write | current | Setting the object to 'flushIGS' will flush all dynamically learnt IGMP snooping entries. Reading the object always returns 'other'. |
| 1.3.6.1.4.1.248.11.10.1.2.5 | Scalarhm2DevMgmtActionFlushPortStats | read-write | current | Setting the object to 'flushPortStats' will flush all port statistics. Reading the object always returns 'other'. |
| 1.3.6.1.4.1.248.11.10.1.2.6 | Scalarhm2DevMgmtActionFlushEmailLogStats | read-write | current | Setting the object to 'flushEmailLogCounters' will flush all email logging statistics. Reading the object always returns 'other'. |
| 1.3.6.1.4.1.248.11.10.1.2.7 | Scalarhm2DevMgmtActionFlushMMRP | read-write | current | Setting the object to 'flushMMRP' will flush all MMRP counters. Reading the object always returns 'other'. |
| 1.3.6.1.4.1.248.11.10.1.2.8 | Scalarhm2DevMgmtActionFlushMVRP | read-write | current | Setting the object to 'flushMVRP' will flush all MVRP counters. Reading the object always returns 'other'. |
| 1.3.6.1.4.1.248.11.10.1.2.9 | Scalarhm2DevMgmtActionFlushMSRP | read-write | current | Setting the object to 'flushMSRP' will flush all MSRP counters. Reading the object always returns 'other'. |
| 1.3.6.1.4.1.248.11.10.1.2.10 | Scalarhm2DevMgmtActionFlushIeee8021AS | read-write | current | Setting the object to 'flushIeee8021AS' will flush all IEEE8021AS related counters. Reading the object always returns 'other'. |
| 1.3.6.1.4.1.248.11.10.1.2.11 | Scalarhm2DevMgmtActionFlushDnsClientCache | read-write | current | Setting the object to 'flushDnsClientCache' will flush all DNS client cache records. Reading the object always returns 'other'. |
| 1.3.6.1.4.1.248.11.10.1.2.12 | Scalarhm2DevMgmtActionFlushDnsCachingServerCache | read-write | current | Setting the object to 'flushDnsCachingServerCache' will flush all DNS caching server cache records. Reading the object always returns 'other'. |
| 1.3.6.1.4.1.248.11.10.1.2.13 | Scalarhm2DevMgmtActionFlushIpUdpHelperStats | read-write | current | Setting the object to 'flushIpUdpHelperStats' will flush all ip udp helper statistics. Reading the object always returns 'other'. |
| 1.3.6.1.4.1.248.11.10.1.2.14 | Scalarhm2DevMgmtActionFlushAclStats | read-write | current | Setting the object to 'flushAclStats' will flush all acl statistics from the AgentAclRuleTable. Setting the object to 'flushAclMacStats' will flush all acl sta… |
| 1.3.6.1.4.1.248.11.10.1.2.15 | Scalarhm2DevMgmtActionFlushLdapUserCache | read-write | current | Setting the object to 'flushLdapUserCache' will flush all cached users from LDAP queries to an Active Directory Server. Reading the object always returns 'othe… |
| 1.3.6.1.4.1.248.11.10.1.2.16 | Scalarhm2DevMgmtActionFlushMgmtAccessStatistics | read-write | current | Setting the object to 'flushMgmtAccessStatistics' will flush all management access statistics. Reading the object always returns 'other'. |
| 1.3.6.1.4.1.248.11.10.1.2.17 | Scalarhm2DevMgmtActionFlushDiffServ | read-write | current | Setting the object to 'flushDiffServ' will flush all diffserv tables. Reading the object always returns 'other'. |
| 1.3.6.1.4.1.248.11.10.1.2.100 | Scalarhm2DevMgmtActionDelayPreset | read-write | current | Time in seconds until a reset that was triggered over the hm2DevMgmtActionReset object is executed. Writing a zero will cancel any scheduled reset. |
| 1.3.6.1.4.1.248.11.10.1.2.101 | Scalarhm2DevMgmtActionDelayCurrent | read-only | current | If a delayed reset is scheduled this object will decrement from the start value to zero. |
| 1.3.6.1.4.1.248.11.10.1.2.102 | Scalarhm2DevMgmtActionLanBypass | read-write | current | Enable/Disable run-time LAN Bypass mode upon software request. Run-time LAN bypass feature ensures that traffic pass freely between interface pairs, when syste… |
| 1.3.6.1.4.1.248.11.10.1.2.103 | Scalarhm2DevMgmtActionSystemoffLanBypass | read-write | current | Enable/Disable system-off LAN Bypass mode upon software request. Systemoff LAN bypass feature ensures that traffic pass freely between interface pairs in the e… |
| 1.3.6.1.4.1.248.11.10.1.3 | Nodehm2DeviceMgmtSoftwareGroup | |||
| 1.3.6.1.4.1.248.11.10.1.3.1 | Nodehm2DeviceMgmtSoftwareVersionGroup | |||
| 1.3.6.1.4.1.248.11.10.1.3.1.1 | Scalarhm2DevMgmtSwVersBootcode | read-only | current | Software version of the boot code. |
| 1.3.6.1.4.1.248.11.10.1.3.1.2 | Scalarhm2DevMgmtSwVersAllowUnsigned | read-write | current | Status Enable allows the update with an unsigned firmware Status Disable blocks the update with an unsigned firmware. |
| 1.3.6.1.4.1.248.11.10.1.3.1.7 | Tablehm2DevMgmtSwVersCertTable | not-accessible | current | This table contains all information related to the stored certificates. |
| 1.3.6.1.4.1.248.11.10.1.3.1.7.1 | Rowhm2DevMgmtSwVersCertEntry | not-accessible | current | Certificate table entry. |
| 1.3.6.1.4.1.248.11.10.1.3.1.7.1.1 | Columnhm2DevMgmtSwVersCertIndex | not-accessible | current | Certificate index. |
| 1.3.6.1.4.1.248.11.10.1.3.1.7.1.2 | Columnhm2DevMgmtSwVersCertSerialNo | read-only | current | Certificate serial number. |
| 1.3.6.1.4.1.248.11.10.1.3.1.7.1.3 | Columnhm2DevMgmtSwVersCertSubject | read-only | current | Certificate subject name. |
| 1.3.6.1.4.1.248.11.10.1.3.1.7.1.4 | Columnhm2DevMgmtSwVersCertSigAlg | read-only | current | Certificate signature algorithm. |
| 1.3.6.1.4.1.248.11.10.1.3.1.7.1.5 | Columnhm2DevMgmtSwVersCertType | read-only | current | Certificate type used for image verification. |
| 1.3.6.1.4.1.248.11.10.1.3.1.7.1.6 | Columnhm2DevMgmtSwVersCertStatus | read-only | current | Contains the revocation status of the Certificate. |
| 1.3.6.1.4.1.248.11.10.1.3.1.7.1.7 | Columnhm2DevMgmtSwVersCertFingerprint | read-only | current | SHA-256 certificate fingerprint. |
| 1.3.6.1.4.1.248.11.10.1.3.1.10 | Tablehm2DevMgmtSwVersTable | not-accessible | current | This table contains all information related to running and stored software versions on the device. The limit are 24 firmware (*.bin) files in up to 5 directory… |
| 1.3.6.1.4.1.248.11.10.1.3.1.10.1 | Rowhm2DevMgmtSwVersEntry | not-accessible | current | The entry of the hm2DevMgmtSwVersTable. |
| 1.3.6.1.4.1.248.11.10.1.3.1.10.1.1 | Columnhm2DevMgmtSwFileLocation | not-accessible | current | Indicates the file location (ram, flash, sd-card or usb). |
| 1.3.6.1.4.1.248.11.10.1.3.1.10.1.2 | Columnhm2DevMgmtSwFileType | not-accessible | current | Indicates the file type (firmware, applet, logic). |
| 1.3.6.1.4.1.248.11.10.1.3.1.10.1.3 | Columnhm2DevMgmtSwFileIdx | not-accessible | current | Indicates the index. For flash the index has the following meaning: - flash.xxx.1 = bootable version in flash (ROM) - flash.xxx.2 = backup version in flash (BA… |
| 1.3.6.1.4.1.248.11.10.1.3.1.10.1.4 | Columnhm2DevMgmtSwFileName | read-only | current | Indicates the file name. |
| 1.3.6.1.4.1.248.11.10.1.3.1.10.1.5 | Columnhm2DevMgmtSwVersion | read-only | current | Version of the stored software. |
| 1.3.6.1.4.1.248.11.10.1.3.1.10.1.6 | Columnhm2DevMgmtSwMajorRelNum | read-only | current | Shows the major release number of the firmware. |
| 1.3.6.1.4.1.248.11.10.1.3.1.10.1.7 | Columnhm2DevMgmtSwMinorRelNum | read-only | current | Shows the minor release number of the firmware. |
| 1.3.6.1.4.1.248.11.10.1.3.1.10.1.8 | Columnhm2DevMgmtSwBugfixRelNum | read-only | current | Shows the bug fix release number of the firmware. |
| 1.3.6.1.4.1.248.11.10.1.4 | Nodehm2DeviceMgmtHardwareGroup | |||
| 1.3.6.1.4.1.248.11.10.1.4.1 | Scalarhm2DevMgmtHwVersion | read-only | current | Version of the device hardware. |
| 1.3.6.1.4.1.248.11.10.1.4.2 | Scalarhm2DevMgmtSwitchingCoreVersion | read-only | current | Version of the device hardware. |
| 1.3.6.1.4.1.248.11.10.1.4.5 | Nodehm2DeviceMgmtLogicVersionGroup | |||
| 1.3.6.1.4.1.248.11.10.1.4.5.1 | Tablehm2DevMgmtLogicVersTable | not-accessible | current | The table displays all versions of supported logic modules. |
| 1.3.6.1.4.1.248.11.10.1.4.5.1.1 | Rowhm2DevMgmtLogicVersEntry | not-accessible | current | The entry of the hm2DevMgmtLogicVersTable. |
| 1.3.6.1.4.1.248.11.10.1.4.5.1.1.1 | Columnhm2DevMgmtLogicIdx | not-accessible | current | Index of the module to display. |
| 1.3.6.1.4.1.248.11.10.1.4.5.1.1.2 | Columnhm2DevMgmtLogicAddress | read-only | current | Address of the logic module in fpga. |
| 1.3.6.1.4.1.248.11.10.1.4.5.1.1.3 | Columnhm2DevMgmtLogicVersion | read-only | current | Version of the logic module in fpga. |
| 1.3.6.1.4.1.248.11.10.1.5 | Nodehm2DeviceMgmtTemperatureGroup | |||
| 1.3.6.1.4.1.248.11.10.1.5.1 | Scalarhm2DevMgmtTemperature | read-only | current | This object is used to identify the temperature within a device in units of centigrade (Celsius). |
| 1.3.6.1.4.1.248.11.10.1.5.2 | Scalarhm2DevMgmtTemperatureUpperLimit | read-write | current | This object is used to define a maximum level for the temperature within a device. If the temperature rises above this upper limit, the management station will… |
| 1.3.6.1.4.1.248.11.10.1.5.3 | Scalarhm2DevMgmtTemperatureLowerLimit | read-write | current | This object is used to define a minimum level for the temperature within a device. If the temperature falls below this lower limit, the management station will… |
| 1.3.6.1.4.1.248.11.10.1.5.10 | Tablehm2DevMgmtTemperatureExtTable | not-accessible | current | This table is used to identify the temperature settings within a device. |
| 1.3.6.1.4.1.248.11.10.1.5.10.1 | Rowhm2DevMgmtTemperatureExtEntry | not-accessible | current | The entries of the temperature table per unit. |
| 1.3.6.1.4.1.248.11.10.1.5.10.1.1 | Columnhm2DevMgmtTemperatureExtType | not-accessible | current | This object is used to identify the type of the temperature sensor. |
| 1.3.6.1.4.1.248.11.10.1.5.10.1.2 | Columnhm2DevMgmtTemperatureExtSensorId | read-only | current | This object is used to identify the sensor Id. |
| 1.3.6.1.4.1.248.11.10.1.5.10.1.3 | Columnhm2DevMgmtTemperatureExt | read-only | current | This object is used to identify the temperature within a device in units of centigrade (Celsius). |
| 1.3.6.1.4.1.248.11.10.1.5.10.1.4 | Columnhm2DevMgmtTemperatureExtUpperLimit | read-write | current | This object is used to define a maximum level for the temperature within a device. If the temperature rises above this upper limit, the management station will… |
| 1.3.6.1.4.1.248.11.10.1.5.10.1.5 | Columnhm2DevMgmtTemperatureExtLowerLimit | read-write | current | This object is used to define a minimum level for the temperature within a device. If the temperature falls below this lower limit, the management station will… |
| 1.3.6.1.4.1.248.11.10.1.6 | Nodehm2IfaceGroup | |||
| 1.3.6.1.4.1.248.11.10.1.6.1 | Tablehm2IfaceTable | not-accessible | current | This table contains extended PHY capabilities and configuration options. |
| 1.3.6.1.4.1.248.11.10.1.6.1.1 | Rowhm2IfaceEntry | not-accessible | current | Entry with the configuration options and supported features of a port. |
| 1.3.6.1.4.1.248.11.10.1.6.1.1.1 | Columnhm2IfacePhysIndex | accessible-for-notify | current | The index of the available physical interfaces. |
| 1.3.6.1.4.1.248.11.10.1.6.1.1.2 | Columnhm2IfacePortCapabilityBits | read-only | current | manual-mdix - port supports MDIX and MDI auto-mdix - port supports MDIX and Auto-MDIX auto-power-down - port can enter low power mode if no link is established… |
| 1.3.6.1.4.1.248.11.10.1.6.1.1.3 | Columnhm2IfaceCableCrossing | read-write | current | This variable configures the cable crossing on twisted pair cables. When set to 'mdi', the device does not swap the send and receive line pairs of the TP cable… |
| 1.3.6.1.4.1.248.11.10.1.6.1.1.4 | Columnhm2IfacePowerState | read-write | current | This variable configures the power on the interface. When set to 'enable' that means the interface-power is on (power up) When set to 'disable' that means the … |
| 1.3.6.1.4.1.248.11.10.1.6.1.1.5 | Columnhm2IfaceAutoPowerDown | read-write | current | This variable configures the automatic power save mode on the interface. When set to 'auto-power-down', the port goes in a low power mode if no link is detecte… |
| 1.3.6.1.4.1.248.11.10.1.6.1.1.6 | Columnhm2IfaceOperAdminStatus | read-only | current | This variable shows the operational admin state of a specific interface. The operational state could be different to the ifAdminStatus if the interface is forc… |
| 1.3.6.1.4.1.248.11.10.1.6.2 | Tablehm2IfaceLayoutTable | not-accessible | current | This table does contain the layout of the interface modules or blocks. It contains all possible physical and logical items. This table can be used to determine… |
| 1.3.6.1.4.1.248.11.10.1.6.2.1 | Rowhm2IfaceLayoutEntry | not-accessible | current | An entry of a module or block of interfaces. |
| 1.3.6.1.4.1.248.11.10.1.6.2.1.1 | Columnhm2IfaceLayoutIndex | not-accessible | current | The index used for this table. |
| 1.3.6.1.4.1.248.11.10.1.6.2.1.2 | Columnhm2IfaceLayoutStartIfIndex | read-only | current | It specifies the first interface index of this block or module. |
| 1.3.6.1.4.1.248.11.10.1.6.2.1.3 | Columnhm2IfaceLayoutEndIfIndex | read-only | current | It specifies the last interface index of this block or module that can exist for this particular device. The amount of interfaces between first and last may no… |
| 1.3.6.1.4.1.248.11.10.1.6.2.1.4 | Columnhm2IfaceLayoutModuleCapacity | read-only | current | It is the Number of modules in that block. Currently not used and it is always 0. |
| 1.3.6.1.4.1.248.11.10.1.6.2.1.5 | Columnhm2IfaceLayoutModulePortCapacity | read-only | current | Number of interfaces that one module can contain. Currently not used and it is always 0 |
| 1.3.6.1.4.1.248.11.10.1.6.2.1.6 | Columnhm2IfaceLayoutFormat | read-only | current | This specifies a format string that can be used to determine the textual representation of an interface in this block. following wildcards are supported: %i th… |
| 1.3.6.1.4.1.248.11.10.1.6.2.1.7 | Columnhm2IfaceLayoutIfIndexType | read-only | current | Type of the interfaces in that block according to IANA-Type table. |
| 1.3.6.1.4.1.248.11.10.1.6.3 | Tablehm2IfaceExtTable | not-accessible | current | This table contains additional information about the interfaces. |
| 1.3.6.1.4.1.248.11.10.1.6.3.1 | Rowhm2IfaceExtEntry | not-accessible | current | . |
| 1.3.6.1.4.1.248.11.10.1.6.3.1.1 | Columnhm2IfaceExtIfRole | read-only | current | The current role of the interface. |
| 1.3.6.1.4.1.248.11.10.1.7 | Nodehm2SfpGroup | |||
| 1.3.6.1.4.1.248.11.10.1.7.1 | Tablehm2SfpInfoTable | not-accessible | current | This table contains variables for each SFP. |
| 1.3.6.1.4.1.248.11.10.1.7.1.1 | Rowhm2SfpInfoEntry | not-accessible | current | Entry for a detected SFP. |
| 1.3.6.1.4.1.248.11.10.1.7.1.1.1 | Columnhm2SfpModuleType | read-only | current | Type of the module. SFP or SFP+ (3), XFP (6). |
| 1.3.6.1.4.1.248.11.10.1.7.1.1.2 | Columnhm2SfpMediaType | read-only | current | The SFP's Media Type |
| 1.3.6.1.4.1.248.11.10.1.7.1.1.3 | Columnhm2SfpConnector | read-only | current | The SFP's Connector Type. |
| 1.3.6.1.4.1.248.11.10.1.7.1.1.4 | Columnhm2SfpVendorName | read-only | current | The SFP's vendor name (ASCII). |
| 1.3.6.1.4.1.248.11.10.1.7.1.1.5 | Columnhm2SfpVendorOUI | read-only | current | The vendor organizationally unique identifier field (OUI). |
| 1.3.6.1.4.1.248.11.10.1.7.1.1.6 | Columnhm2SfpPartNumber | read-only | current | The part number of the module (ASCII). |
| 1.3.6.1.4.1.248.11.10.1.7.1.1.7 | Columnhm2SfpPartRev | read-only | current | The revision number of the module (ASCII). |
| 1.3.6.1.4.1.248.11.10.1.7.1.1.8 | Columnhm2SfpSerialNum | read-only | current | The SFP's serial number provided by vendor (ASCII). |
| 1.3.6.1.4.1.248.11.10.1.7.1.1.9 | Columnhm2SfpDateCode | read-only | current | The SFP's vendor manufacturing date code. Format is YY:MM:DD. |
| 1.3.6.1.4.1.248.11.10.1.7.1.1.10 | Columnhm2SfpInfoVersion | read-only | current | Version of SFP's Hirschmann information. Contains -1 in case of a device read error. |
| 1.3.6.1.4.1.248.11.10.1.7.1.1.11 | Columnhm2SfpInfoPartNumber | read-only | current | Part Number of SFP's Hirschmann information. |
| 1.3.6.1.4.1.248.11.10.1.7.1.1.12 | Columnhm2SfpInfoPartId | read-only | current | Part Identifier of SFP's Hirschmann information. |
| 1.3.6.1.4.1.248.11.10.1.7.1.1.13 | Columnhm2SfpBitRateNominal | read-only | current | The SFP's nominal bitrate in units of MBits/sec. Contains -1 in case of a device read error. |
| 1.3.6.1.4.1.248.11.10.1.7.1.1.14 | Columnhm2SfpBitRateMin | read-only | current | The minimum bit rate is specified in units of 100 Megabits per second, rounded off to the nearest 100 Megabits per second. A value of 0 indicates that the mini… |
| 1.3.6.1.4.1.248.11.10.1.7.1.1.15 | Columnhm2SfpBitRateMax | read-only | current | The maximum bit rate is specified in units of 100 Megabits per second, rounded off to the nearest 100 Megabits per second. A value of 0 indicates that the maxi… |
| 1.3.6.1.4.1.248.11.10.1.7.1.1.16 | Columnhm2SfpMaxLength-fiber-9 | read-only | current | Max. usable length for the cable type '9/125 micrometer fiber' with this SFP in units of meters. |
| 1.3.6.1.4.1.248.11.10.1.7.1.1.17 | Columnhm2SfpMaxLength-fiber-50 | read-only | current | Max. usable length for the cable type '50/125 micrometer fiber' with this SFP in units of meters. |
| 1.3.6.1.4.1.248.11.10.1.7.1.1.18 | Columnhm2SfpMaxLength-fiber-e50 | read-only | current | Max. usable length for the cable type 'EBW 50/125 micrometer fiber' with this SFP in units of meters or -1 if not supported. |
| 1.3.6.1.4.1.248.11.10.1.7.1.1.19 | Columnhm2SfpMaxLength-fiber-62-5 | read-only | current | Max. usable length for the cable type '62.5/125 micrometer fiber' with this SFP in units of meters. |
| 1.3.6.1.4.1.248.11.10.1.7.1.1.20 | Columnhm2SfpMaxLength-copper | read-only | current | Max. usable length for the cable type 'copper' with this SFP in units of meters. |
| 1.3.6.1.4.1.248.11.10.1.7.1.1.21 | Columnhm2SfpWaveLength | read-only | current | Nominal transmitter output wavelength at room temperature. The laser wavelength in nm (units of 0.05nm). |
| 1.3.6.1.4.1.248.11.10.1.7.1.1.22 | Columnhm2SfpWaveLengthTolerance | read-only | current | The +/- range of transmitter output wavelength under normal operating conditions or -1 if not supported. |
| 1.3.6.1.4.1.248.11.10.1.7.1.1.23 | Columnhm2SfpEnhancedOptions | read-only | current | Not supported. |
| 1.3.6.1.4.1.248.11.10.1.7.1.1.24 | Columnhm2SfpSupported | read-only | current | The SFP is supported by the device (true) or not (false). |
| 1.3.6.1.4.1.248.11.10.1.7.1.1.25 | Columnhm2SfpSupportedReason | read-only | current | The reason why this SFP is supported. |
| 1.3.6.1.4.1.248.11.10.1.7.2 | Tablehm2SfpDiagTable | not-accessible | current | This table contains variables for each SFP. |
| 1.3.6.1.4.1.248.11.10.1.7.2.1 | Rowhm2SfpDiagEntry | not-accessible | current | Entry for a detected SFP. |
| 1.3.6.1.4.1.248.11.10.1.7.2.1.1 | Columnhm2SfpCurrentBitRate | read-only | current | The current bit rate in units of Megabits per second. |
| 1.3.6.1.4.1.248.11.10.1.7.2.1.2 | Columnhm2SfpCurrentTemperature | read-only | current | This signed integer is used to identify the temperature within the SFP in units of centigrade (Celsius). Contains -1000 in case of a device read error. |
| 1.3.6.1.4.1.248.11.10.1.7.2.1.3 | Columnhm2SfpCurrentTxPower | read-only | current | The SFP's internally measured Tx Power in units of 1/10 microwatt or -1 if it is not supported. |
| 1.3.6.1.4.1.248.11.10.1.7.2.1.4 | Columnhm2SfpCurrentRxPower | read-only | current | The SFP's internally measured Rx Power in units of 1/10 microWatts or -10000 if not supportted. |
| 1.3.6.1.4.1.248.11.10.1.7.2.1.5 | Columnhm2SfpCurrentTxPowerdBm | read-only | current | The SFP's internally measured Tx Power in units of dBm. (ASCII representation of a floating point number). - if not supported. |
| 1.3.6.1.4.1.248.11.10.1.7.2.1.6 | Columnhm2SfpCurrentRxPowerdBm | read-only | current | The SFP's internally measured Rx Power in units of dBm. (ASCII representation of a floating point number). - if not supported. |
| 1.3.6.1.4.1.248.11.10.1.7.2.1.7 | Columnhm2SfpCurrentRxPowerState | read-only | current | The state of the SFP's internally measured Rx. |
| 1.3.6.1.4.1.248.11.10.1.7.3 | Nodehm2SfpWLGroup | |||
| 1.3.6.1.4.1.248.11.10.1.7.3.1 | Scalarhm2SfpWLStatus | read-only | current | Status of the SFP White List. present(1): a white list is present on the device absent(2): no white list is present on the device not-supported(3): white list … |
| 1.3.6.1.4.1.248.11.10.1.7.4 | Tablehm2SfpThresholdTable | not-accessible | current | This table contains the thresholds for each SFP. |
| 1.3.6.1.4.1.248.11.10.1.7.4.1 | Rowhm2SfpThresholdEntry | not-accessible | current | Entry for a detected SFP. |
| 1.3.6.1.4.1.248.11.10.1.7.4.1.1 | Columnhm2SfpTemperatureHighAlarm | read-only | current | The SFP's Temperature High Alarm threshold in units of centigrade (Celsius). It is -1000 if the SFP device does not support it or in case of a device read erro… |
| 1.3.6.1.4.1.248.11.10.1.7.4.1.2 | Columnhm2SfpTemperatureHighWarning | read-only | current | The SFP's Temperature High Warning threshold in units of centigrade (Celsius). It is -1000 if the SFP device does not support it or in case of a device read er… |
| 1.3.6.1.4.1.248.11.10.1.7.4.1.3 | Columnhm2SfpTemperatureLowAlarm | read-only | current | The SFP's Temperature Low Alarm threshold in units of centigrade (Celsius). It is -1000 if the SFP device does not support it or in case of a device read error. |
| 1.3.6.1.4.1.248.11.10.1.7.4.1.4 | Columnhm2SfpTemperatureLowWarning | read-only | current | The SFP's Temperature Low Warning threshold in units of centigrade (Celsius). It is -1000 if the SFP device does not support it or in case of a device read err… |
| 1.3.6.1.4.1.248.11.10.1.7.4.1.5 | Columnhm2SfpTxPowerHighAlarm | read-only | current | The SFP's Tx Power High Alarm threshold in units of 0.1uW. It is -10000 if the SFP device does not support it or in case of a device read error. |
| 1.3.6.1.4.1.248.11.10.1.7.4.1.6 | Columnhm2SfpTxPowerHighWarning | read-only | current | The SFP's Tx Power High Warning threshold in units of 0.1uW. It is -10000 if the SFP device does not support it or in case of a device read error. |
| 1.3.6.1.4.1.248.11.10.1.7.4.1.7 | Columnhm2SfpTxPowerLowAlarm | read-only | current | The SFP's Tx Power Low Alarm threshold in units of 0.1uW. It is -10000 if the SFP device does not support it or in case of a device read error. |
| 1.3.6.1.4.1.248.11.10.1.7.4.1.8 | Columnhm2SfpTxPowerLowWarning | read-only | current | The SFP's Tx Power Low Warning threshold in units of 0.1uW. It is -10000 if the SFP device does not support it or in case of a device read error. |
| 1.3.6.1.4.1.248.11.10.1.7.4.1.9 | Columnhm2SfpRxPowerHighAlarm | read-only | current | The SFP's Rx Power High Alarm threshold in units of 0.1uW. It is -10000 if the SFP device does not support it or in case of a device read error. |
| 1.3.6.1.4.1.248.11.10.1.7.4.1.10 | Columnhm2SfpRxPowerHighWarning | read-only | current | The SFP's Rx Power High Warning threshold in units of 0.1uW. It is -10000 if the SFP device does not support it or in case of a device read error. |
| 1.3.6.1.4.1.248.11.10.1.7.4.1.11 | Columnhm2SfpRxPowerLowAlarm | read-only | current | The SFP's Rx Power Low Alarm threshold in units of 0.1uW. It is -10000 if the SFP device does not support it or in case of a device read error. |
| 1.3.6.1.4.1.248.11.10.1.7.4.1.12 | Columnhm2SfpRxPowerLowWarning | read-only | current | The SFP's Rx Power Low Warning threshold in units of 0.1uW. It is -10000 if the SFP device does not support it or in case of a device read error. |
| 1.3.6.1.4.1.248.11.10.1.7.4.1.13 | Columnhm2SfpTxPowerdBmHighAlarm | read-only | current | The SFP's Tx Power High Alarm threshold in units of dBm (ASCII representation of floating point number). It is N/A if the SFP device does not support it or in … |
| 1.3.6.1.4.1.248.11.10.1.7.4.1.14 | Columnhm2SfpTxPowerdBmHighWarning | read-only | current | The SFP's Tx Power High Warning threshold in units of dBm (ASCII representation of floating point number). It is N/A if the SFP device does not support it or i… |
| 1.3.6.1.4.1.248.11.10.1.7.4.1.15 | Columnhm2SfpTxPowerdBmLowAlarm | read-only | current | The SFP's Tx Power Low Alarm threshold in units of dBm (ASCII representation of floating point number). It is N/A if the SFP device does not support it or in c… |
| 1.3.6.1.4.1.248.11.10.1.7.4.1.16 | Columnhm2SfpTxPowerdBmLowWarning | read-only | current | The SFP's Tx Power Low Warning threshold in units of dBm (ASCII representation of floating point number). It is N/A if the SFP device does not support it or in… |
| 1.3.6.1.4.1.248.11.10.1.7.4.1.17 | Columnhm2SfpRxPowerdBmHighAlarm | read-only | current | The SFP's Rx Power High Alarm threshold in units of dBm (ASCII representation of floating point number). It is N/A if the SFP device does not support it or in … |
| 1.3.6.1.4.1.248.11.10.1.7.4.1.18 | Columnhm2SfpRxPowerdBmHighWarning | read-only | current | The SFP's Rx Power High Warning threshold in units of dBm (ASCII representation of floating point number). It is N/A if the SFP device does not support it or i… |
| 1.3.6.1.4.1.248.11.10.1.7.4.1.19 | Columnhm2SfpRxPowerdBmLowAlarm | read-only | current | The SFP's Rx Power Low Alarm threshold in units of dBm (ASCII representation of floating point number). It is N/A if the SFP device does not support it or in c… |
| 1.3.6.1.4.1.248.11.10.1.7.4.1.20 | Columnhm2SfpRxPowerdBmLowWarning | read-only | current | The SFP's Rx Power Low Warning threshold in units of dBm (ASCII representation of floating point number). It is N/A if the SFP device does not support it or in… |
| 1.3.6.1.4.1.248.11.10.1.8 | Nodehm2ExtNvmGroup | |||
| 1.3.6.1.4.1.248.11.10.1.8.1 | Nodehm2ExtNvmGeneralGroup | |||
| 1.3.6.1.4.1.248.11.10.1.8.1.1 | Scalarhm2ExtNvmChooseActive | read-write | current | The user can choose which external NV memory to use for file operations. |
| 1.3.6.1.4.1.248.11.10.1.8.1.2 | Scalarhm2ExtNvmLogDevice | read-write | current | The user can choose which external NV memory to use for persistent logging. |
| 1.3.6.1.4.1.248.11.10.1.8.1.3 | Scalarhm2ExtNvmAdminMode | read-write | current | Switches the USB bus between High Speed (normal) and Full Speed (compatibility). This setting only takes effect after a reboot. |
| 1.3.6.1.4.1.248.11.10.1.8.1.4 | Scalarhm2ExtNvmOperMode | read-only | current | Shows the USB mode the device is currently operating in. |
| 1.3.6.1.4.1.248.11.10.1.8.2 | Tablehm2ExtNvmTable | not-accessible | current | This table contains variables for each nvram. |
| 1.3.6.1.4.1.248.11.10.1.8.2.1 | Rowhm2ExtNvmEntry | not-accessible | current | Entry for an external nvram. |
| 1.3.6.1.4.1.248.11.10.1.8.2.1.1 | Columnhm2ExtNvmTableIndex | not-accessible | current | Index |
| 1.3.6.1.4.1.248.11.10.1.8.2.1.2 | Columnhm2ExtNvmStatus | read-only | current | Status of the external non-volatile memory. notPresent(1): external non-volatile memory has not been detected. removed(2): external non-volatile memory was rem… |
| 1.3.6.1.4.1.248.11.10.1.8.2.1.3 | Columnhm2ExtNvmManufacturerId | read-only | current | The manufacturer ID. |
| 1.3.6.1.4.1.248.11.10.1.8.2.1.4 | Columnhm2ExtNvmHWRevision | read-only | current | The application ID. |
| 1.3.6.1.4.1.248.11.10.1.8.2.1.5 | Columnhm2ExtNvmProductName | read-only | current | The product name. |
| 1.3.6.1.4.1.248.11.10.1.8.2.1.6 | Columnhm2ExtNvmVersion | read-only | current | The version. |
| 1.3.6.1.4.1.248.11.10.1.8.2.1.7 | Columnhm2ExtNvmSerialNum | read-only | current | The serial number provided by vendor (ASCII). |
| 1.3.6.1.4.1.248.11.10.1.8.2.1.8 | Columnhm2ExtNvmAutomaticSoftwareLoad | read-write | current | Enable or disable Automatic loading of a software image from the external non-volatile memory. A file named 'startup.txt' must be present on the external non-v… |
| 1.3.6.1.4.1.248.11.10.1.8.2.1.9 | Columnhm2ExtNvmConfigLoadPriority | read-write | current | Set the priority of this external non-volatile memory for loading the configuration while booting. The configuration on the device with the lowest priority is … |
| 1.3.6.1.4.1.248.11.10.1.8.2.1.10 | Columnhm2ExtNvmConfigSave | read-write | current | Enable or disable Automatic saving of the configuration to the external non-volatile memory. If this is enabled, saving the configuration of the device to its … |
| 1.3.6.1.4.1.248.11.10.1.8.2.1.11 | Columnhm2ExtNvmWritable | read-only | current | Shows if writing to the device is possible, i.e. if it is write protected. |
| 1.3.6.1.4.1.248.11.10.1.8.2.1.12 | Columnhm2ExtNvmAutomaticSshKeyLoad | read-write | current | Enable or disable automatic loading of a SSH key from the external non-volatile memory. A file named 'startup.txt' must be present on the external non-volatile… |
| 1.3.6.1.4.1.248.11.10.1.9 | Nodehm2AutoDisableGroup | |||
| 1.3.6.1.4.1.248.11.10.1.9.1 | Tablehm2AutoDisableIntfTable | not-accessible | current | Port Auto Disable interface table. |
| 1.3.6.1.4.1.248.11.10.1.9.1.1 | Rowhm2AutoDisableIntfEntry | not-accessible | current | Port Auto Disable interface entry. |
| 1.3.6.1.4.1.248.11.10.1.9.1.1.1 | Columnhm2AutoDisableIntfRemainingTime | read-only | current | Remaining time in seconds until the re-activation of the port. |
| 1.3.6.1.4.1.248.11.10.1.9.1.1.2 | Columnhm2AutoDisableIntfComponentName | read-only | current | Name of the component that triggered the error |
| 1.3.6.1.4.1.248.11.10.1.9.1.1.3 | Columnhm2AutoDisableIntfErrorReason | read-only | current | Error disable reason |
| 1.3.6.1.4.1.248.11.10.1.9.1.1.4 | Columnhm2AutoDisableIntfTimer | read-write | current | Timer value in seconds after a deactivated port is activated again. Possible values are: 30-4294967295. A value of 0 disables the timer. |
| 1.3.6.1.4.1.248.11.10.1.9.1.1.5 | Columnhm2AutoDisableIntfReset | read-write | current | Port Auto Disable interface reset. |
| 1.3.6.1.4.1.248.11.10.1.9.1.1.6 | Columnhm2AutoDisableIntfOperState | read-only | current | Status of Auto Disable interface admin state. Active means that a component has encountered an error and Auto-Disable has turned off the interface. Inactive me… |
| 1.3.6.1.4.1.248.11.10.1.9.1.1.7 | Columnhm2AutoDisableIntfErrorTime | read-only | current | Local system time (hm2SystemLocalTime) when the error occured. |
| 1.3.6.1.4.1.248.11.10.1.9.2 | Tablehm2AutoDisableReasonTable | not-accessible | current | Possible reasons for Auto Disable |
| 1.3.6.1.4.1.248.11.10.1.9.2.1 | Rowhm2AutoDisableReasonEntry | not-accessible | current | Port Auto Disable interface entry. |
| 1.3.6.1.4.1.248.11.10.1.9.2.1.1 | Columnhm2AutoDisableReasons | not-accessible | current | Reason for deactivation a port |
| 1.3.6.1.4.1.248.11.10.1.9.2.1.2 | Columnhm2AutoDisableReasonOperation | read-write | current | Enables/disables recovery by resaon on this device. |
| 1.3.6.1.4.1.248.11.10.1.9.2.1.3 | Columnhm2AutoDisableReasonCategory | read-only | current | Auto Disable Reason Category |
| 1.3.6.1.4.1.248.11.10.1.10 | Nodehm2UnitGroup | |||
| 1.3.6.1.4.1.248.11.10.1.10.100 | Tablehm2UnitTable | not-accessible | current | This table contains unit capabilities and configuration options. |
| 1.3.6.1.4.1.248.11.10.1.10.100.1 | Rowhm2UnitEntry | not-accessible | current | Entry with the configuration options and supported features of a unit. |
| 1.3.6.1.4.1.248.11.10.1.10.100.1.1 | Columnhm2UnitIndex | accessible-for-notify | current | The index of the available unit. |
| 1.3.6.1.4.1.248.11.10.1.10.100.1.2 | Columnhm2UnitMaxModuleCapacity | read-only | current | Maximum number of modules that this unit can contain in this system. |
| 1.3.6.1.4.1.248.11.10.1.10.100.1.3 | Columnhm2UnitMaxModulePortCapacity | read-only | current | Maximum number of ports that a module can contain in this unit. |
| 1.3.6.1.4.1.248.11.10.1.11 | Nodehm2ModuleGroup | |||
| 1.3.6.1.4.1.248.11.10.1.11.100 | Tablehm2ModuleTable | not-accessible | current | This table contains capabilities and configuration options of device modules. |
| 1.3.6.1.4.1.248.11.10.1.11.100.1 | Rowhm2ModuleEntry | not-accessible | current | Entry with the configuration options and supported features of a device module. |
| 1.3.6.1.4.1.248.11.10.1.11.100.1.1 | Columnhm2ModuleIndex | accessible-for-notify | current | The index of the available module. |
| 1.3.6.1.4.1.248.11.10.1.11.100.1.2 | Columnhm2ModuleId | read-only | current | Manufacturer-defined product identifier (module family + product ID). Example: Object-ID 1.3.6.1.4.1.248.11.2.2.1 is the hm2ModuleFamily MSM and Object-ID 1.3.… |
| 1.3.6.1.4.1.248.11.10.1.11.100.1.3 | Columnhm2ModuleDescription | read-write | current | Description of the module. This value cannot be written by external entities (only for internal purposes). |
| 1.3.6.1.4.1.248.11.10.1.11.100.1.4 | Columnhm2ModuleProductCode | read-only | current | Product Code of the module. |
| 1.3.6.1.4.1.248.11.10.1.11.100.1.5 | Columnhm2ModuleVersion | read-only | current | Version of the module. |
| 1.3.6.1.4.1.248.11.10.1.11.100.1.6 | Columnhm2ModuleNumOfPorts | read-only | current | The numberOfPorts is the number of ports contained within the module. Within each module, the ports are uniquely numbered in the range from 1 to numberOfPorts. |
| 1.3.6.1.4.1.248.11.10.1.11.100.1.7 | Columnhm2ModuleFirstMauIndex | read-only | obsolete | Value of the first mauIndex used by the module. **NOTE: This object is obsolete in favour of hm2ModuleFirstIfIndex.** |
| 1.3.6.1.4.1.248.11.10.1.11.100.1.8 | Columnhm2ModuleStatus | read-write | current | Status of the module. If the value is physical(1), then the module is plugged in, if the value is configurable, the ports can be configured, but the card is ab… |
| 1.3.6.1.4.1.248.11.10.1.11.100.1.9 | Columnhm2ModuleSerialNum | read-only | current | The serial number provided by vendor (ASCII). |
| 1.3.6.1.4.1.248.11.10.1.11.100.1.10 | Columnhm2ModuleMinSWVersion | read-only | current | The minimum software version required to support this module. |
| 1.3.6.1.4.1.248.11.10.1.11.100.1.11 | Columnhm2ModuleCapability | read-write | current | poe - module supports Power over Ethernet, fpga - module has a FPGA, ptp - module supports PTP, io-module - module is an IO module. This value cannot be writte… |
| 1.3.6.1.4.1.248.11.10.1.11.100.1.12 | Columnhm2ModuleInternalID | read-write | current | An internal ID of the Module. This value cannot be written by external entities (only for internal purposes). |
| 1.3.6.1.4.1.248.11.10.1.11.100.1.13 | Columnhm2ModuleInternalIDVariant | read-write | obsolete | An internal variant ID of the Module. **NOTE: This object is obsolete.** |
| 1.3.6.1.4.1.248.11.10.1.11.100.1.14 | Columnhm2ModuleFirstIfIndex | read-only | current | Value of the first ifIndex used by the module. |
| 1.3.6.1.4.1.248.11.10.1.11.100.1.15 | Columnhm2ModuleAdminState | read-write | current | Enable or disable the module. If disabled, module plugged in this slot will not be activated. |
| 1.3.6.1.4.1.248.11.10.1.12 | Nodehm2DeviceMgmtHumidityGroup | |||
| 1.3.6.1.4.1.248.11.10.1.12.1 | Scalarhm2DevMgmtHumidity | read-only | current | This object is used to identify the humidity within a device. |
| 1.3.6.1.4.1.248.11.10.1.12.2 | Scalarhm2DevMgmtHumidityUpperLimit | read-write | current | This object is used to define a maximum level for the humidity within a device. If the humidity rises above this upper limit, the management station will be no… |
| 1.3.6.1.4.1.248.11.10.1.12.3 | Scalarhm2DevMgmtHumidityLowerLimit | read-write | current | This object is used to define a minimum level for the humidity within a device. If the humidity falls below this lower limit, the management station will be no… |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| Hm2DeviceExtNVMType | INTEGER { none(0), sd(1), usb(2), serial(3) } | current | Type of an external non volatile memory device. |