MIB Viewer

HM2-DUAL-RSTP-MIB

35 objects
Hirschmann DualRSTP MIB. Copyright (C) 2019. All Rights Reserved.
OIDNameAccessStatusDescription
1.3.6.1.4.1.248.11.150Identityhm2DualRstpMibHirschmann DualRSTP MIB. Copyright (C) 2019. All Rights Reserved.
1.3.6.1.4.1.248.11.150.0Nodehm2DualRstpMibNotifications
1.3.6.1.4.1.248.11.150.1Nodehm2DualRstpMibObjects
1.3.6.1.4.1.248.11.150.1.0Nodehm2DualRstpCstConfigGroup
1.3.6.1.4.1.248.11.150.1.0.1Scalarhm2DualRstpAdminModeread-onlycurrentThe spanning tree operational status. enable(1) - enables spanning tree operational status on the switch. disable(2) - disables spanning tree operational statu…
1.3.6.1.4.1.248.11.150.1.0.2Scalarhm2DualRstpCstHelloTimeread-onlycurrentThe MSTP root port hello time for the CIST.
1.3.6.1.4.1.248.11.150.1.0.3Scalarhm2DualRstpCstMaxAgeread-onlycurrentThe MSTP root port max age for the CIST.
1.3.6.1.4.1.248.11.150.1.0.4Scalarhm2DualRstpCstRegionalRootIdread-onlycurrentThe MSTP regional root identifier for the CIST.
1.3.6.1.4.1.248.11.150.1.0.5Scalarhm2DualRstpCstRegionalRootPathCostread-onlycurrentThe MSTP regional root path cost for the CIST.
1.3.6.1.4.1.248.11.150.1.0.6Scalarhm2DualRstpCstRootFwdDelayread-onlycurrentThe MSTP root port forward delay for the CIST.
1.3.6.1.4.1.248.11.150.1.0.7Scalarhm2DualRstpCstBridgeMaxAgeread-writecurrentThe MSTP bridge max age for the CIST. The default value is 20.
1.3.6.1.4.1.248.11.150.1.0.8Scalarhm2DualRstpCstBridgeHelloTimeread-writecurrentThe MSTP bridge hello time for the CIST. The default value is 2. According to IEEE 802.1Q-REV 2005 updating hello time is disallowed
1.3.6.1.4.1.248.11.150.1.0.9Scalarhm2DualRstpCstBridgeHoldTimeread-onlycurrentThe MSTP bridge hold time for the CIST.
1.3.6.1.4.1.248.11.150.1.0.10Scalarhm2DualRstpCstBridgeFwdDelayread-writecurrentThe MSTP bridge forward delay for the CIST. The default value is 15.
1.3.6.1.4.1.248.11.150.1.0.11Scalarhm2DualRstpCstBridgeMaxHopsread-writecurrentThe MSTP bridge max hops for the CIST. The default value is 20.
1.3.6.1.4.1.248.11.150.1.0.12Scalarhm2DualRstpCstBridgePriorityread-writecurrentThe MSTP bridge priority for the CIST. The default value is 32768.
1.3.6.1.4.1.248.11.150.1.0.13Scalarhm2DualRstpCstBridgeTimeSinceTopologyChangeread-onlycurrentThe time (in hundredths of a second) since the last time a topology change was detected by the bridge entity.
1.3.6.1.4.1.248.11.150.1.0.14Scalarhm2DualRstpCstBridgeTopChangesread-onlycurrentThe total number of topology changes detected by this bridge since the management entity was last reset or initialized.
1.3.6.1.4.1.248.11.150.1.0.15Scalarhm2DualRstpCstBridgeTopologyChangeParmread-onlycurrentThe topology change parameter detected by this bridge since the management entity was last reset or initialized.
1.3.6.1.4.1.248.11.150.1.0.16Scalarhm2DualRstpCstBridgeRootCostread-onlycurrentThe cost of the path to the DualRstp root as seen from this bridge.
1.3.6.1.4.1.248.11.150.1.0.17Scalarhm2DualRstpCstBridgeRootPortread-onlycurrentThe port number of the port which offers the lowest cost path from this bridge to the DualRstp root bridge.
1.3.6.1.4.1.248.11.150.1.0.18Scalarhm2DualRstpCstBridgeHoldCountread-writecurrentThe MSTP bridge hold count for the CIST. This command sets the value of maximum bpdus that a bridge is allowed to send within a hello time window. The default …
1.3.6.1.4.1.248.11.150.1.0.19Scalarhm2DualRstpBpduGuardModeread-writecurrentThe spanning tree BPDU Guard Mode. enable(1) - enables BPDU Guard Mode on the switch. disable(2) - disables BPDU Guard Mode on the switch. The default status i…
1.3.6.1.4.1.248.11.150.1.0.20Scalarhm2DualRstpBpduFilterDefaultread-writecurrentThe spanning tree BPDU Filter Mode, it enables BPDU Filter on all edge ports. enable(1) - enables BPDU Filter Mode on the switch. disable(2) - disables BPDU Fi…
1.3.6.1.4.1.248.11.150.1.0.21Scalarhm2DualRstpBridgeIdentifierread-onlycurrentThe bridge identifier of the DualRstp instance.
1.3.6.1.4.1.248.11.150.1.0.22Scalarhm2DualRstpCstBridgeDesignatedRootread-onlycurrentThe DualRstp Designated Root like in dot1dStpDesignatedRoot.
1.3.6.1.4.1.248.11.150.1.0.23Scalarhm2DualRstpRingOnlyModeread-writecurrentWhen RSTP Ring Only Mode is enabled the switch ignores the BPDUs age on Ring Only Mode ports. The topology change BPDUs sent on Ring Only Mode ports will have …
1.3.6.1.4.1.248.11.150.1.0.24Scalarhm2DualRstpRingOnlyModeIntfOneread-writecurrentInterface index of the first interface.
1.3.6.1.4.1.248.11.150.1.0.25Scalarhm2DualRstpRingOnlyModeIntfTworead-writecurrentInterface index of the second interface.
1.3.6.1.4.1.248.11.150.1.0.26Scalarhm2DualRstpTrapModeread-writecurrentThe spanning tree trap status. enable(1) - enables spanning tree traps on the switch. disable(2) - disables spanning tree traps on the switch. The default stat…
1.3.6.1.4.1.248.11.150.1.0.27Scalarhm2DualRstpMstIdread-onlycurrentAdditional index for RSTP MST ID.
1.3.6.1.4.1.248.11.150.1.1Nodehm2DualRstpCstPortConfigGroup
1.3.6.1.4.1.248.11.150.1.1.1Tablehm2DualRstpCstPortTablenot-accessiblecurrentDualRstp CIST port table.
1.3.6.1.4.1.248.11.150.1.1.1.1Rowhm2DualRstpCstPortEntrynot-accessiblecurrentDualRstp CIST port entry.
1.3.6.1.4.1.248.11.150.1.1.1.1.1Columnhm2DualRstpCstPortDrstpInstanceread-onlycurrentMember of DRSTP if true