HM2-FILEMGMT-MIB
79 objects
Hirschmann File Management MIB. Copyright (C) 2011, 2017. All Rights Reserved.
Imported Objects
| HM2-TC-MIB | -- RFC4001 hm2ConfigurationMibs HmEnabledStatus HmTimeSeconds1970 |
| IF-MIB | InterfaceIndexOrZero |
| INET-ADDRESS-MIB | InetAddress InetAddressType |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | -- RFC 2578 DisplayString TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.248.11.21 | Identityhm2FileMgmtMib | Hirschmann File Management MIB. Copyright (C) 2011, 2017. All Rights Reserved. | ||
| 1.3.6.1.4.1.248.11.21.0 | Nodehm2FileMgmtNotifications | |||
| 1.3.6.1.4.1.248.11.21.0.1 | Notificationhm2ConfigurationSavedTrap | current | This trap is sent after the configuration of the agent was successfully saved. | |
| 1.3.6.1.4.1.248.11.21.0.2 | Notificationhm2ConfigurationChangedTrap | current | This trap is sent if there is a change in the synchronization status between currently running and the saved configuration so that the value of hm2FMNvmState c… | |
| 1.3.6.1.4.1.248.11.21.1 | Nodehm2FileMgmtMibObjects | |||
| 1.3.6.1.4.1.248.11.21.1.1 | Nodehm2FileMgmtProfileGroup | |||
| 1.3.6.1.4.1.248.11.21.1.1.1 | Tablehm2FMProfileTable | not-accessible | current | A list of profiles stored in NV memory. |
| 1.3.6.1.4.1.248.11.21.1.1.1.1 | Rowhm2FMProfileEntry | not-accessible | current | A profile entry. |
| 1.3.6.1.4.1.248.11.21.1.1.1.1.1 | Columnhm2FMProfileStorageType | read-only | current | Type of storage of the profile entry. |
| 1.3.6.1.4.1.248.11.21.1.1.1.1.2 | Columnhm2FMProfileIndex | read-only | current | Index of the profile entry. |
| 1.3.6.1.4.1.248.11.21.1.1.1.1.3 | Columnhm2FMProfileName | read-only | current | Name of the entry consisting of alphanumeric characters plus hyphen and underscore. |
| 1.3.6.1.4.1.248.11.21.1.1.1.1.4 | Columnhm2FMProfileDateTime | read-only | current | Time and date of last write access using the content of the variable hm2SystemTime. |
| 1.3.6.1.4.1.248.11.21.1.1.1.1.5 | Columnhm2FMProfileActive | read-write | current | Setting the variable to active(1) enables the profile so that it will be used the next time the configuration is reloaded. Setting the value to inactive(2) is … |
| 1.3.6.1.4.1.248.11.21.1.1.1.1.6 | Columnhm2FMProfileAction | read-write | current | Action to be performed on the profile entry. Setting the value to delete(2) erases the profile. It is not possible to delete the currently active profile. |
| 1.3.6.1.4.1.248.11.21.1.1.1.1.7 | Columnhm2FMProfileDeviceType | read-only | current | Manufacturer-defined product identifier (product family + product ID). Example: Object-ID 1.3.6.1.4.1.248.11.2.1.1 is the hm2ProductFamily EES and Object-ID 1.… |
| 1.3.6.1.4.1.248.11.21.1.1.1.1.8 | Columnhm2FMProfileEncryptionActive | read-only | current | The profile is encrypted if this variable is set to active(true). It is not encrypted in case of inactive(false). |
| 1.3.6.1.4.1.248.11.21.1.1.1.1.9 | Columnhm2FMProfileEncryptionVerified | read-only | current | This variable indicates true if an encrypted profile can be successfully decrypted by the device. In case of an encryption password mismatch, the verification … |
| 1.3.6.1.4.1.248.11.21.1.1.1.1.10 | Columnhm2FMProfileSwMajorRelNum | read-only | current | Shows the major release number of the firmware, the profile was created on. |
| 1.3.6.1.4.1.248.11.21.1.1.1.1.11 | Columnhm2FMProfileSwMinorRelNum | read-only | current | Shows the minor release number of the firmware, the profile was created on. |
| 1.3.6.1.4.1.248.11.21.1.1.1.1.12 | Columnhm2FMProfileSwBugfixRelNum | read-only | current | Shows the bugfix release number of the firmware, the profile was created on. |
| 1.3.6.1.4.1.248.11.21.1.1.1.1.13 | Columnhm2FMProfileFingerprint | read-only | current | HEX String representation of profile content fingerprint. Consists of characters (0..9A..F) to represent a hexadecimal number. It will contain the string inval… |
| 1.3.6.1.4.1.248.11.21.1.1.1.1.14 | Columnhm2FMProfileFingerprintVerified | read-only | current | This variable indicates true if the configuration profiles fingerprint matches the profile's configuration data. In case of a fingerprint, the variable is set … |
| 1.3.6.1.4.1.248.11.21.1.2 | Nodehm2FileMgmtActionGroup | |||
| 1.3.6.1.4.1.248.11.21.1.2.1 | Tablehm2FMActionTable | not-accessible | current | A list of profiles stored in NV memory. |
| 1.3.6.1.4.1.248.11.21.1.2.1.1 | Rowhm2FMActionEntry | not-accessible | current | A profile entry. |
| 1.3.6.1.4.1.248.11.21.1.2.1.1.1 | Columnhm2FMActionType | not-accessible | current | Type of the action to be performed. |
| 1.3.6.1.4.1.248.11.21.1.2.1.1.2 | Columnhm2FMActionItemType | not-accessible | current | Type of the item to be processed. |
| 1.3.6.1.4.1.248.11.21.1.2.1.1.3 | Columnhm2FMActionSourceType | not-accessible | current | Type of the source object to be processed. |
| 1.3.6.1.4.1.248.11.21.1.2.1.1.4 | Columnhm2FMActionDestinationType | not-accessible | current | Type of the destination object to be processed. |
| 1.3.6.1.4.1.248.11.21.1.2.1.1.5 | Columnhm2FMActionActivate | read-write | current | In case of a set operation: If the value to be written matches with the result of hm2FMActionActivateKey, the action is started. In case of a read operation, i… |
| 1.3.6.1.4.1.248.11.21.1.2.10 | Scalarhm2FMActionSourceData | read-write | current | Additional data for the source object. This could, for example, be a profile name or URL |
| 1.3.6.1.4.1.248.11.21.1.2.11 | Scalarhm2FMActionDestinationData | read-write | current | Additional data for the source object. This could be for example a profile name or URL |
| 1.3.6.1.4.1.248.11.21.1.2.12 | Scalarhm2FMActionActivateResult | read-only | current | Either returns ok(1) if the action is successfully started, param-error(2) if there is some problem with the given parameters or busy(3) if there is still an a… |
| 1.3.6.1.4.1.248.11.21.1.2.13 | Scalarhm2FMActionActivateResultText | read-only | current | Text describing why the start of the operation has failed. |
| 1.3.6.1.4.1.248.11.21.1.2.14 | Scalarhm2FMActionStatus | read-only | current | Returns the running status of the action. |
| 1.3.6.1.4.1.248.11.21.1.2.15 | Scalarhm2FMActionPercentReady | read-only | current | Estimation of how many percent of the operation is done. |
| 1.3.6.1.4.1.248.11.21.1.2.16 | Scalarhm2FMActionResult | read-only | current | Error status of the last action which has been performed. |
| 1.3.6.1.4.1.248.11.21.1.2.17 | Scalarhm2FMActionResultText | read-only | current | Either OK or a descriptive text giving a reason why the last operation failed |
| 1.3.6.1.4.1.248.11.21.1.2.18 | Scalarhm2FMActionActivateKey | read-only | current | An advisory lock used to ensure that different management entities can not interfere with each others actions. The value read from this variable must be used t… |
| 1.3.6.1.4.1.248.11.21.1.2.19 | Scalarhm2FMActionContainerPassword | read-write | current | . |
| 1.3.6.1.4.1.248.11.21.1.2.20 | Scalarhm2FMActionParameter | read-write | current | This variable contains additional information that specifies the activated action more detailed. The parameter is only respected for dedicated actions. all(2) … |
| 1.3.6.1.4.1.248.11.21.1.2.21 | Scalarhm2FMActionSourceInterface | read-write | current | This variable defines the interface from which the source IP address will be taken for the file transfer session. The frames will not necessarily be sent on th… |
| 1.3.6.1.4.1.248.11.21.1.3 | Nodehm2FileMgmtStatusGroup | |||
| 1.3.6.1.4.1.248.11.21.1.3.1 | Scalarhm2FMNvmState | read-only | current | This variable returns ok(1) if the contents of the currently used configuration is the same as that stored in NV memory or outOfsync(2) if there are any differ… |
| 1.3.6.1.4.1.248.11.21.1.3.2 | Scalarhm2FMEnvmState | read-only | current | This variable returns ok(1) if the contents of the currently used configuration on the active external non-volatile memory is the same than that stored in NV m… |
| 1.3.6.1.4.1.248.11.21.1.3.3 | Scalarhm2FMBootParamState | read-only | current | Returns outOfSync(2) if the boot parameters that were applied during startup are not in sync with the currently stored boot parameters, otherwise ok(1). |
| 1.3.6.1.4.1.248.11.21.1.4 | Nodehm2FileMgmtConfigGroup | |||
| 1.3.6.1.4.1.248.11.21.1.4.1 | Nodehm2FileMgmtConfigWatchdogControl | |||
| 1.3.6.1.4.1.248.11.21.1.4.1.1 | Scalarhm2ConfigWatchdogAdminStatus | read-write | current | Administrative status of the configuration watchdog. enable(1): start/trigger the watchdog timer disable(2): turn off the watchdog This feature provides recove… |
| 1.3.6.1.4.1.248.11.21.1.4.1.2 | Scalarhm2ConfigWatchdogOperStatus | read-only | current | Operational status of the configuration watchdog. enable(1): watchdog up and running disable(2): watchdog inactive |
| 1.3.6.1.4.1.248.11.21.1.4.1.3 | Scalarhm2ConfigWatchdogTimeInterval | read-write | current | Period of the watchdog timer in seconds. |
| 1.3.6.1.4.1.248.11.21.1.4.1.4 | Scalarhm2ConfigWatchdogTimerValue | read-only | current | Current countdown value of the watchdog timer in seconds. |
| 1.3.6.1.4.1.248.11.21.1.4.1.5 | Scalarhm2ConfigWatchdogIPAddressType | read-only | current | IP address type of station that triggers the watchdog. |
| 1.3.6.1.4.1.248.11.21.1.4.1.6 | Scalarhm2ConfigWatchdogIPAddress | read-only | current | IP address of station that currently triggers the watchdog. |
| 1.3.6.1.4.1.248.11.21.1.4.2 | Nodehm2FileMgmtServerAccessGroup | |||
| 1.3.6.1.4.1.248.11.21.1.4.2.1 | Scalarhm2FMServerUserName | read-write | current | Login name for the used file transport protocol. |
| 1.3.6.1.4.1.248.11.21.1.4.2.2 | Scalarhm2FMServerPassword | read-write | current | Password for the used file transport protocol. |
| 1.3.6.1.4.1.248.11.21.1.4.4 | Nodehm2FileMgmtSecurityGroup | |||
| 1.3.6.1.4.1.248.11.21.1.4.4.1 | Scalarhm2FileMgmtConfigPasswordStatus | read-only | current | Returns 'true' if a configuration password is set, otherwise 'false'. |
| 1.3.6.1.4.1.248.11.21.1.4.4.2 | Scalarhm2FileMgmtConfigPasswordChange | read-write | current | Password to encrypt confidential information in the configuration file. Format: '[old password]|[new password]' set password: '|[new password]' change password… |
| 1.3.6.1.4.1.248.11.21.1.4.5 | Nodehm2FileMgmtConfigRemoteSaveGroup | |||
| 1.3.6.1.4.1.248.11.21.1.4.5.1 | Scalarhm2FMConfigRemoteSaveAdminStatus | read-write | current | enable(1) or disable(2) automatic save of configuration to remote server. |
| 1.3.6.1.4.1.248.11.21.1.4.5.2 | Scalarhm2FMConfigRemoteSaveDestination | read-write | current | Remote URL to the location where the configuration file will be saved. The URL shall not contain the credentials, they will be provided in hm2FMConfigRemoteSav… |
| 1.3.6.1.4.1.248.11.21.1.4.5.3 | Scalarhm2FMConfigRemoteSaveUsername | read-write | current | Specifies the username to be used in remote save operations. This object will always return '******' when read. |
| 1.3.6.1.4.1.248.11.21.1.4.5.4 | Scalarhm2FMConfigRemoteSavePassword | read-write | current | Specifies the password to be used in remote save operations. This object will always return '******' when read. |
| 1.3.6.1.4.1.248.11.21.1.4.9 | Scalarhm2FileMgmtGlobalSourceInterface | read-write | current | This variable defines the global source-interface used by file-transfers in case hm2FMActionSourceInterface is not configured by the user. The frames will not … |
| 1.3.6.1.4.1.248.11.21.1.4.10 | Scalarhm2FileMgmtConfigCompatibilityMode | read-write | current | Set 'hiosV1V2' only if a configuration file needs to be migrated to a device running HiOS 01.x.xx / 02.x.xx software. Otherwise for normal operation it is reco… |
| 1.3.6.1.4.1.248.11.21.3 | Nodehm2FileMgmtSNMPExtensionGroup | |||
| 1.3.6.1.4.1.248.11.21.3.1 | Identityhm2FileMgmtSESCfgActivateSuccessSetFailuresReturn | current | Indicates a configuration profile was activated succesfully, but several config items failed to initialize. | |
| 1.3.6.1.4.1.248.11.21.3.2 | Identityhm2FileMgmtSESCfgActivateErrorReturn | current | Indicates a configuration profile could not be activated. | |
| 1.3.6.1.4.1.248.11.21.3.3 | Identityhm2FileMgmtSESCfgActivateIncomlpeteReturn | current | Indicates an incomlete activation of a configuration profile. | |
| 1.3.6.1.4.1.248.11.21.3.4 | Identityhm2FileMgmtSESCfgMgrCopyCommandErrorReturn | current | Indicates a failure of a COPY command given to the Config-Manager's command engine. | |
| 1.3.6.1.4.1.248.11.21.3.5 | Identityhm2FileMgmtSESCfgMgrClearCommandErrorReturn | current | Indicates a failure of a CLEAR command given to the Config-Manager's command engine. | |
| 1.3.6.1.4.1.248.11.21.3.6 | Identityhm2FileMgmtSESCfgMgrSwapCommandErrorReturn | current | Indicates a failure of a SWAP command given to the Config-Manager's command engine. | |
| 1.3.6.1.4.1.248.11.21.3.7 | Identityhm2FileMgmtSESCfgErrorReturn | current | Indicates a CFG test error. | |
| 1.3.6.1.4.1.248.11.21.3.8 | Identityhm2FileMgmtSESCfgMgrCommandActivateErrorReturn | current | Indicates a failure because other Config-Manager command is running. | |
| 1.3.6.1.4.1.248.11.21.3.9 | Identityhm2FileMgmtActionStatusErrorReturn | current | Operation failed because another operation is already in progress. | |
| 1.3.6.1.4.1.248.11.21.3.10 | Identityhm2FileMgmtConfigRemoteSaveDestinationErrorReturn | current | URL shall not contain credentials, they will be provided separately. | |
| 1.3.6.1.4.1.248.11.21.3.11 | Identityhm2FileMgmtConfigCannotDeleteActiveProfile | current | Cannot delete the active profile. |