HM2-L2REDUNDANCY-MIB
119 objects
Hirschmann Layer 2 Redundancy MIB. Copyright (C) 2011. All Rights Reserved.
Imported Objects
| HM2-TC-MIB | hm2ConfigurationMibs HmEnabledStatus |
| IF-MIB | InterfaceIndexOrZero |
| INET-ADDRESS-MIB | InetAddress InetAddressType |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | MacAddress RowStatus TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.248.11.40 | Identityhm2L2RedundancyMib | Hirschmann Layer 2 Redundancy MIB. Copyright (C) 2011. All Rights Reserved. | ||
| 1.3.6.1.4.1.248.11.40.0 | Nodehm2L2RedundancyMibNotifications | |||
| 1.3.6.1.4.1.248.11.40.0.1 | Notificationhm2MrpReconfig | current | This notification is sent if the MRP ring has switched over. | |
| 1.3.6.1.4.1.248.11.40.0.2 | Notificationhm2SrmReconfig | current | This notification is sent if the SRM ring has switched over. | |
| 1.3.6.1.4.1.248.11.40.0.3 | Notificationhm2RingCplReconfig | current | The Ring Coupling mechanism has switched over | |
| 1.3.6.1.4.1.248.11.40.0.4 | Notificationhm2RedundantCplReconfig | current | The RCP Redundancy mechanism has switched over. | |
| 1.3.6.1.4.1.248.11.40.1 | Nodehm2L2RedundancyMibObjects | |||
| 1.3.6.1.4.1.248.11.40.1.1 | Nodehm2MrpMibGroup | |||
| 1.3.6.1.4.1.248.11.40.1.1.1 | Tablehm2MrpTable | not-accessible | current | Every entry in this table contains information about a Media Redundancy Protocol (MRP) domain, defined by IEC 62439-2. |
| 1.3.6.1.4.1.248.11.40.1.1.1.1 | Rowhm2MrpEntry | not-accessible | current | An entry in the hm2MrpTable. |
| 1.3.6.1.4.1.248.11.40.1.1.1.1.1 | Columnhm2MrpDomainID | accessible-for-notify | current | Universally unique identifier belongs to the MRP domain which represents a ring. |
| 1.3.6.1.4.1.248.11.40.1.1.1.1.2 | Columnhm2MrpDomainName | read-create | current | A logical name for the MRP domain to ease the management of MRP domains. |
| 1.3.6.1.4.1.248.11.40.1.1.1.1.3 | Columnhm2MrpRingport1GroupID | read-create | obsolete | Unique index to identify the slot number of the ringport 1 in the MRP domain. |
| 1.3.6.1.4.1.248.11.40.1.1.1.1.4 | Columnhm2MrpRingport1IfIndex | read-create | current | Interface index of the ringport 1 in the MRP domain. |
| 1.3.6.1.4.1.248.11.40.1.1.1.1.5 | Columnhm2MrpRingport1OperState | read-only | current | Operational state of ringport 1. disabled(1) indicates that all frames are dropped. blocked(2) indicates that all frames are dropped except - MRP topology chan… |
| 1.3.6.1.4.1.248.11.40.1.1.1.1.6 | Columnhm2MrpRingport2GroupID | read-create | obsolete | Unique index to identify the slot number of the ringport 2 in the MRP domain. |
| 1.3.6.1.4.1.248.11.40.1.1.1.1.7 | Columnhm2MrpRingport2IfIndex | read-create | current | Interface index of the ringport 2 in the MRP domain. |
| 1.3.6.1.4.1.248.11.40.1.1.1.1.8 | Columnhm2MrpRingport2OperState | read-only | current | Operational state of ringport 2. disabled(1) indicates that all frames are dropped. blocked(2) indicates that all frames are dropped except - MRP topology chan… |
| 1.3.6.1.4.1.248.11.40.1.1.1.1.9 | Columnhm2MrpRoleAdminState | read-create | current | Control the role of the MRP entity in the MRP domain. If the value is set to client(1) the entity will be in the role of a Media Redundancy Client (MRC). If th… |
| 1.3.6.1.4.1.248.11.40.1.1.1.1.10 | Columnhm2MrpRoleOperState | read-only | current | Operational role of the MRP entity in the MRP domain. client(1) indicates that the MRP entity is in a MRC role. manager(2) indicates that the MRP entity is the… |
| 1.3.6.1.4.1.248.11.40.1.1.1.1.11 | Columnhm2MrpRecoveryDelay | read-create | current | The MRM defines with its parameter set the maximum recovery delay of the ring recovery in the MRP domain. delay500(1) specifies the parameter set for the maxim… |
| 1.3.6.1.4.1.248.11.40.1.1.1.1.12 | Columnhm2MrpRecoveryDelaySupported | read-only | current | The 10ms and 30ms recovery time put additional restrictions on the cable length and on the reaction time of each client in the MRP ring, so these recovery time… |
| 1.3.6.1.4.1.248.11.40.1.1.1.1.13 | Columnhm2MrpVlanID | read-create | current | VLAN identifier assigned to the MRP domain. If value is set to 0 no VLAN is assigned. |
| 1.3.6.1.4.1.248.11.40.1.1.1.1.14 | Columnhm2MrpMRMPriority | read-create | current | Priority of the MRM. A lower value indicates a higher priority. |
| 1.3.6.1.4.1.248.11.40.1.1.1.1.15 | Columnhm2MrpMRMReactOnLinkChange | read-create | current | Specifies whether the MRM reacts on all MRP link change frames or not. enabled(1) indicates that the MRM reacts on all MRP link change frames. disabled(2) indi… |
| 1.3.6.1.4.1.248.11.40.1.1.1.1.16 | Columnhm2MrpMRMRingOpenCount | read-only | current | Counter will be incremented when the ring state changes to ring open. |
| 1.3.6.1.4.1.248.11.40.1.1.1.1.17 | Columnhm2MrpMRMLastRingOpenChange | read-only | current | The local time at which the ring state last changed to ring open. Measured in seconds since 00:00:00, January 1, 1970. |
| 1.3.6.1.4.1.248.11.40.1.1.1.1.18 | Columnhm2MrpMRMRoundTripDelayMax | read-only | current | The max. Round-Trip-Delay (in microseconds) which was measured by the MRM since startup or reset. A device which supports only the recovery delays 200ms and 50… |
| 1.3.6.1.4.1.248.11.40.1.1.1.1.19 | Columnhm2MrpMRMRoundTripDelayMin | read-only | current | The min. Round-Trip-Delay (in microseconds) which was measured by the MRM since startup or reset. A device which supports only the recovery delays 200ms and 50… |
| 1.3.6.1.4.1.248.11.40.1.1.1.1.20 | Columnhm2MrpMRMRoundTripDelayReset | read-write | current | A write request with reset(1) will reset the values of hm2MrpMRMRoundTripDelayMax and hm2MrpMRMRoundTripDelayMin to zero at the same time. |
| 1.3.6.1.4.1.248.11.40.1.1.1.1.21 | Columnhm2MrpMRMNonBlockingMRCSupported | read-only | current | Ability of the MRM to support MRC in the ring which have hm2MrpMRCBlockedSupported set disabled. enabled(1) indicates that the MRM is able to support MRC in th… |
| 1.3.6.1.4.1.248.11.40.1.1.1.1.22 | Columnhm2MrpMRCBlockedSupported | read-only | current | Ability of the MRC to receive and forward MRP test frames, MRP link change frames and MRP topology change frames at a ringport whose port state is blocked. ena… |
| 1.3.6.1.4.1.248.11.40.1.1.1.1.23 | Columnhm2MrpRingOperState | read-only | current | Actual ring state of the MRP redundancy domain. The ring state can only be detected by the MRM. open(1) indicates that the ring is open. closed(2) indicates th… |
| 1.3.6.1.4.1.248.11.40.1.1.1.1.24 | Columnhm2MrpRedundancyOperState | read-only | current | Operational state of ring redundancy in the MRP domain. available(1) indicates that ring redundancy exists in the MRP domain. notAvailable(2) indicates that ri… |
| 1.3.6.1.4.1.248.11.40.1.1.1.1.25 | Columnhm2MrpConfigOperState | read-only | current | Operational state of the configuration in the MRP domain. noError(1) indicates that no configuration error was detected. ringportLinkError(2) indicates that on… |
| 1.3.6.1.4.1.248.11.40.1.1.1.1.26 | Columnhm2MrpRowStatus | read-create | current | Supports creation, deletion and activation of rows. A row must not be active(1) in order to be modified. A row can be taken out of service by writing the value… |
| 1.3.6.1.4.1.248.11.40.1.1.1.1.27 | Columnhm2MrpRingport2FixedBackup | read-create | current | If value is set to enable(1) the ringport 2 at the MRM will always be the backup port. Setting is only relevant if hm2MrpRoleAdminState is set to manager(2). |
| 1.3.6.1.4.1.248.11.40.1.1.2 | Nodehm2MrpConformance | |||
| 1.3.6.1.4.1.248.11.40.1.1.2.1 | Nodehm2MrpCompliances | |||
| 1.3.6.1.4.1.248.11.40.1.1.2.1.1 | Compliancehm2MrpCompliance | current | Basic implementation requirements for MRP support. The agent shall support the monitoring and control of MRP redundancy domains. | |
| 1.3.6.1.4.1.248.11.40.1.1.2.2 | Nodehm2MrpGroups | |||
| 1.3.6.1.4.1.248.11.40.1.1.2.2.1 | Grouphm2MrpDomainBasicGroup | current | Parameters which are necessary to monitor and control the status of MRP domains. | |
| 1.3.6.1.4.1.248.11.40.1.1.2.2.2 | Grouphm2MrpDomainManagerGroup | current | Additional parameters which are necessary to monitor and control the status of a MRM. | |
| 1.3.6.1.4.1.248.11.40.1.1.2.2.3 | Grouphm2MrpDomainDiagGroup | current | Parameters which are optional to monitor and control the diagnostic status of MRP domains. | |
| 1.3.6.1.4.1.248.11.40.1.1.2.2.4 | Grouphm2MrpNotificationsGroup | current | Notifications indicate changes in the MRP ring. | |
| 1.3.6.1.4.1.248.11.40.1.1.3 | Scalarhm2MrpFastMrp | read-only | current | Fast MRP means that MRP supports also maximum recovery times of 30ms or 10ms as defined in IEC 62439-2. supported(1) indicates that the device is able to suppo… |
| 1.3.6.1.4.1.248.11.40.1.4 | Nodehm2SrmMibGroup | |||
| 1.3.6.1.4.1.248.11.40.1.4.1 | Scalarhm2SrmGlobalAdminState | read-write | current | Enables or disables the global SRM admin mode. |
| 1.3.6.1.4.1.248.11.40.1.4.2 | Scalarhm2SrmMaxInstances | read-only | current | Maximum number of supported SRM instances in the hm2SrmTable. |
| 1.3.6.1.4.1.248.11.40.1.4.3 | Tablehm2SrmTable | not-accessible | current | Every entry in this table contains information about a Sub-Ring Manager (SRM) domain. |
| 1.3.6.1.4.1.248.11.40.1.4.3.1 | Rowhm2SrmEntry | not-accessible | current | Information about a Sub-Ring Manager (SRM) domain. |
| 1.3.6.1.4.1.248.11.40.1.4.3.1.1 | Columnhm2SrmRingID | accessible-for-notify | current | Identifier of the sub-ring in the SRM domain. |
| 1.3.6.1.4.1.248.11.40.1.4.3.1.2 | Columnhm2SrmAdminState | read-create | current | Admin state of the entity in the SRM domain. If the value is set to manager(1) the entity will be in the role of a Sub-Ring Manager. If the value is set to red… |
| 1.3.6.1.4.1.248.11.40.1.4.3.1.3 | Columnhm2SrmOperState | read-only | current | Operational state of the entity in the SRM domain. manager(1) indicates that the entity is in the role of a Sub-Ring Manager. redundantManager(2) indicates tha… |
| 1.3.6.1.4.1.248.11.40.1.4.3.1.4 | Columnhm2SrmVlanID | read-create | current | VLAN identifier of the SRM domain. If value is set to 0 no VLAN is assigned. |
| 1.3.6.1.4.1.248.11.40.1.4.3.1.5 | Columnhm2SrmMRPDomainID | read-create | current | Only for MRP: Universally unique identifier belongs to the MRP domain which represents a sub- ring. |
| 1.3.6.1.4.1.248.11.40.1.4.3.1.6 | Columnhm2SrmPartnerMAC | read-only | current | The MAC address of the partner Sub-Ring Manager in the same sub-ring domain. |
| 1.3.6.1.4.1.248.11.40.1.4.3.1.7 | Columnhm2SrmSubRingProtocol | read-create | current | If the value is set to iec-62439-mrp(4) the Entity will run the MRP protocol. Note: If using iec-62439-mrp(4) all clients in The sub-ring segment must run MRP … |
| 1.3.6.1.4.1.248.11.40.1.4.3.1.8 | Columnhm2SrmSubRingName | read-create | current | Name of the sub-ring in the SRM domain. |
| 1.3.6.1.4.1.248.11.40.1.4.3.1.9 | Columnhm2SrmSubRingPortIfIndex | read-create | current | Interface index of sub-ring port in the SRM domain. |
| 1.3.6.1.4.1.248.11.40.1.4.3.1.10 | Columnhm2SrmSubRingPortOperState | read-only | current | Operational state of sub-ring port. disabled(1) indicates that all frames are dropped. blocked(2) indicates that all frames are dropped except - frames used by… |
| 1.3.6.1.4.1.248.11.40.1.4.3.1.11 | Columnhm2SrmSubRingOperState | read-only | current | Operational state of the sub-ring in the SRM domain. undefined(1) indicates an undefined sub-ring state. open(2) indicates that the sub-ring is opened. closed(… |
| 1.3.6.1.4.1.248.11.40.1.4.3.1.12 | Columnhm2SrmRedundancyOperState | read-only | current | Operational state of the ring redundancy in The SRM domain. redGuaranteed(1) indicates that ring redundancy is guaranteed in the SRM domain. redNotGuaranteed(2… |
| 1.3.6.1.4.1.248.11.40.1.4.3.1.13 | Columnhm2SrmConfigOperState | read-only | current | Operational state of the configuration in the SRM domain. noError(1) indicates that no configuration error was detected. ringPortLinkError(2) indicates that th… |
| 1.3.6.1.4.1.248.11.40.1.4.3.1.20 | Columnhm2SrmRowStatus | read-create | current | Defines the status of the SRM database entry. |
| 1.3.6.1.4.1.248.11.40.1.7 | Nodehm2RingRedMibGroup | |||
| 1.3.6.1.4.1.248.11.40.1.7.1 | Scalarhm2RingRedAdminState | read-write | current | Enables or disables the global (HIPER)Ring Redundancy admin mode. |
| 1.3.6.1.4.1.248.11.40.1.7.2 | Scalarhm2RingRedMode | read-write | current | The mode (HIPER)Ring Redundancy is configured. |
| 1.3.6.1.4.1.248.11.40.1.7.3 | Scalarhm2RingRedPrimaryIntf | read-write | current | Interface index of the primary interface. |
| 1.3.6.1.4.1.248.11.40.1.7.4 | Scalarhm2RingRedPrimaryIntfState | read-only | current | Operational state of the primary ring port. The port states are as follows, active - port is logically up and active. inactive - port is logically down. not-av… |
| 1.3.6.1.4.1.248.11.40.1.7.5 | Scalarhm2RingRedSecondaryIntf | read-write | current | Interface index of the secondary interface. |
| 1.3.6.1.4.1.248.11.40.1.7.6 | Scalarhm2RingRedSecondaryIntfState | read-only | current | Operational state of the secondary ring port. The port states are as follows, active - port is logically up and active. inactive - port is logically down. not-… |
| 1.3.6.1.4.1.248.11.40.1.8 | Nodehm2RingCouplingMibGroup | |||
| 1.3.6.1.4.1.248.11.40.1.8.1 | Tablehm2RingCouplingTable | not-accessible | current | This table contains variables to define an entry in the ring coupling database. |
| 1.3.6.1.4.1.248.11.40.1.8.1.1 | Rowhm2RingCouplingEntry | not-accessible | current | The entry of the hm2RingCouplingTable. |
| 1.3.6.1.4.1.248.11.40.1.8.1.1.1 | Columnhm2RingCplInterconnIfIndex | read-write | current | Interface index of the coupling link. Note that only those ports can be chosen which do not belong to another L2 redundancy mechanism like ring redundancy or d… |
| 1.3.6.1.4.1.248.11.40.1.8.1.1.2 | Columnhm2RingCplInterconnIfOpState | read-only | current | Operational state of the coupling interface. active(2) indicates that the port is switching. standby(3) indicates that the port is in standby mode. On the slav… |
| 1.3.6.1.4.1.248.11.40.1.8.1.1.3 | Columnhm2RingCplControlIfIndex | read-write | current | Interface index of the control link in case of outband-control. Note that only those ports can be chosen which do not belong to another L2 redundancy mechanism… |
| 1.3.6.1.4.1.248.11.40.1.8.1.1.4 | Columnhm2RingCplControlIfOpState | read-only | current | Operational state of the control interface in case of outband-control. |
| 1.3.6.1.4.1.248.11.40.1.8.1.1.5 | Columnhm2RingCplPartnerInterconnIfIndex | read-write | current | Interface index identifies the coupling link of the partner in the ring coupling. This variable can only be set if the hm2RingCplControlMode is local(4). |
| 1.3.6.1.4.1.248.11.40.1.8.1.1.6 | Columnhm2RingCplPartnerInterconnIfOpState | read-only | current | Operational state of the coupling interface of the partner in the ring coupling. active(2) indicates that the partner port is switching. standby(3) indicates t… |
| 1.3.6.1.4.1.248.11.40.1.8.1.1.7 | Columnhm2RingCplPartnerIpAddrType | read-only | current | Partner IP Address type. |
| 1.3.6.1.4.1.248.11.40.1.8.1.1.8 | Columnhm2RingCplPartnerIpAddr | read-only | current | IP Address of the partner in the ring coupling. |
| 1.3.6.1.4.1.248.11.40.1.8.1.1.9 | Columnhm2RingCplCouplingMode | read-write | current | Ring-coupling operating mode . In single(1) mode both coupling ports are local to the switch, switch performs master and slave functions. In dual-master-inband… |
| 1.3.6.1.4.1.248.11.40.1.8.1.1.10 | Columnhm2RingCplControlModeOperState | read-only | current | Control mode of the ring coupling which can only be chosen by the slave, the master just reports his current control mode. unknown(3) cannot be set. In outband… |
| 1.3.6.1.4.1.248.11.40.1.8.1.1.11 | Columnhm2RingCplModeOperState | read-only | current | Mode of operation . slaveOn(2) slave is activated. slaveOff(1) slave is deactivated, the ring coupling is disabled and the switch acts from now in normal rs mo… |
| 1.3.6.1.4.1.248.11.40.1.8.1.1.12 | Columnhm2RingCplOperState | read-only | current | Operational state of an entry. If a new entry is created by setting hm2RingCplRowStatus to create(1), the operState returns a value of underCreation(1). slave(… |
| 1.3.6.1.4.1.248.11.40.1.8.1.1.13 | Columnhm2RingCplConfigOperState | read-only | current | Operational state of the ring coupling configuration. slaveCouplingLinkError(2) indicates that the coupling link is not connected with the coupling port of the… |
| 1.3.6.1.4.1.248.11.40.1.8.1.1.14 | Columnhm2RingCplCouplingLinks | read-write | current | Maximum coupling links between two coupled rings in case of a failure in one of the coupled rings. If there is no connection starting from the switch in slave … |
| 1.3.6.1.4.1.248.11.40.1.8.1.1.15 | Columnhm2RingCplExtendedDiag | read-only | current | Additional operational states detected by the slave or in local mode. basicRedundancyInactive(2) indicates that the coupling port has been prevented from setti… |
| 1.3.6.1.4.1.248.11.40.1.8.1.1.16 | Columnhm2RingCplNetCoupling | read-write | current | Specifies the kind of the coupled net segment. If two HIPER Rings are coupled ringCoupling(1) must be used. In netCoupling(2) the coupled segment is no HIPER R… |
| 1.3.6.1.4.1.248.11.40.1.8.1.1.17 | Columnhm2RingCplRedOperState | read-only | current | Operational state of the Ring/Net coupling redundancy. redGuaranteed(1) indicates that redundancy is guaranteed in the ring coupling. redNotGuaranteed(2) indic… |
| 1.3.6.1.4.1.248.11.40.1.8.1.1.22 | Columnhm2RingCplRowStatus | read-create | current | Defines the status of a ring coupling database entry. |
| 1.3.6.1.4.1.248.11.40.1.9 | Nodehm2RedundantCplConfigMibGroup | |||
| 1.3.6.1.4.1.248.11.40.1.9.1 | Scalarhm2RedundantCplAdminState | read-write | current | Enables or disables the global RCP admin state. |
| 1.3.6.1.4.1.248.11.40.1.9.2 | Scalarhm2RedundantCplInPrimaryPort | read-write | current | The inner coupling port of the primary ring. |
| 1.3.6.1.4.1.248.11.40.1.9.3 | Scalarhm2RedundantCplOutPrimaryPort | read-write | current | The outer coupling port of the primary ring. |
| 1.3.6.1.4.1.248.11.40.1.9.4 | Scalarhm2RedundantCplInSecondaryPort | read-write | current | The inner coupling port of the secondary ring |
| 1.3.6.1.4.1.248.11.40.1.9.5 | Scalarhm2RedundantCplOutSecondaryPort | read-write | current | The outer coupling port of the secondary ring |
| 1.3.6.1.4.1.248.11.40.1.9.6 | Scalarhm2RedundantCplRole | read-write | current | Configurable role of the RCP coupler. |
| 1.3.6.1.4.1.248.11.40.1.9.7 | Scalarhm2RedundantCplCurrentRole | read-only | current | Current role of the RCP coupler. |
| 1.3.6.1.4.1.248.11.40.1.9.8 | Scalarhm2RedundantCplTimeout | read-write | current | RCP coupler timeout in milliseconds. |
| 1.3.6.1.4.1.248.11.40.1.9.9 | Scalarhm2RedundantCplPartner | read-only | current | MAC address of the coupling partner. |
| 1.3.6.1.4.1.248.11.40.1.9.10 | Scalarhm2RedundantCplPartnerPrimaryPort | read-only | current | Port of the coupling partner in the primary ring. |
| 1.3.6.1.4.1.248.11.40.1.9.11 | Scalarhm2RedundantCplPartnerSecondaryPort | read-only | current | Port of the coupling partner in the secondary ring. |
| 1.3.6.1.4.1.248.11.40.1.9.12 | Scalarhm2RedundantCplState | read-only | current | current forwarding state of the RCP coupler. |
| 1.3.6.1.4.1.248.11.40.1.9.13 | Scalarhm2RedundantCplRedundancyState | read-only | current | Indicates if coupling redundancy is available. |
| 1.3.6.1.4.1.248.11.40.1.9.14 | Scalarhm2RedundantCplPartnerIPAddrType | read-only | current | Partner IP Address type. |
| 1.3.6.1.4.1.248.11.40.1.9.15 | Scalarhm2RedundantCplPartnerIPAddr | read-only | current | IP address of the coupling partner. |
| 1.3.6.1.4.1.248.11.40.1.9.16 | Scalarhm2RedundantCplActiveProtPrimaryRing | read-only | current | Active protocol on primary redundant coupling ring ports. |
| 1.3.6.1.4.1.248.11.40.1.9.17 | Scalarhm2RedundantCplActiveProtSecondaryRing | read-only | current | Active protocol on secondary redundant coupling ring ports. |
| 1.3.6.1.4.1.248.11.40.3 | Nodehm2L2RedundancyMibSNMPExtensionGroup | |||
| 1.3.6.1.4.1.248.11.40.3.8 | Nodehm2RingCouplingMibSESGroup | |||
| 1.3.6.1.4.1.248.11.40.3.8.1 | Identityhm2RingCouplingInvalidPortConfiguration | current | Could not enable Ring/Net Coupling configuration. In {0} control mode the {1} should be selected, different from the coupling port and in the valid range. | |
| 1.3.6.1.4.1.248.11.40.3.9 | Nodehm2RedundantCplSESGroup | |||
| 1.3.6.1.4.1.248.11.40.3.9.1 | Identityhm2RedundantCplPortsMissing | current | Could not enable RCP. The required ports are not configured. | |
| 1.3.6.1.4.1.248.11.40.3.9.2 | Identityhm2RedundantCplSecondaryGroupUnitMismatched | current | Could not enable RCP. The selected RCP inner and outer secondary interfaces are not correctly configured. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| Hm2CplPortOpState | INTEGER { not-connected(1), active(2), standby(3), not-applicable(4) } | current | Current state of the port. |
| Hm2CplRingActiveProt | INTEGER { error(1), rstp(2), drstp(3), mrp(4), dlr(5), hiper-ring(6) } | current | The current active redundancy protocol running on the port. |