HM2-PLATFORM-RADIUS-MIB
59 objects
The Hirschmann Private Platform2 MIB for Client Radius Authentication and Accounting. Copyright (C) 2011-2013. All Rights Reserved.
Imported Objects
| HM2-TC-MIB | hm2PlatformMibs HmEnabledStatus |
| IF-MIB | InterfaceIndexOrZero |
| INET-ADDRESS-MIB | InetAddress InetAddressType |
| SNMPv2-SMI | Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString RowStatus |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.248.12.8 | Identityhm2PlatformRadius | The Hirschmann Private Platform2 MIB for Client Radius Authentication and Accounting. Copyright (C) 2011-2013. All Rights Reserved. | ||
| 1.3.6.1.4.1.248.12.8.1 | Nodehm2AgentRadiusConfigGroup | |||
| 1.3.6.1.4.1.248.12.8.1.1 | Scalarhm2AgentRadiusMaxTransmit | read-write | current | Maximum number of retransmissions of a RADIUS request packet |
| 1.3.6.1.4.1.248.12.8.1.2 | Scalarhm2AgentRadiusTimeout | read-write | current | Time out duration (in seconds) before packets are retransmitted. |
| 1.3.6.1.4.1.248.12.8.1.3 | Scalarhm2AgentRadiusAccountingMode | read-write | current | Identifies if RADIUS accounting has been enabled or not. |
| 1.3.6.1.4.1.248.12.8.1.4 | Scalarhm2AgentRadiusStatsClear | read-write | current | When set to enable(1), all RADIUS statistics will be reset. |
| 1.3.6.1.4.1.248.12.8.1.5 | Scalarhm2AgentRadiusAccountingIndexNextValid | read-only | current | Indicates the next valid index into the hm2AgentRadiusAccountingConfigTable for creation. If no additional entries are allowed, this will be 0. |
| 1.3.6.1.4.1.248.12.8.1.6 | Tablehm2AgentRadiusAccountingConfigTable | not-accessible | current | Table with information about RADIUS accounting server IP addresses, port numbers and shared secrets. Only one entry is supported at this time. |
| 1.3.6.1.4.1.248.12.8.1.6.1 | Rowhm2AgentRadiusAccountingConfigEntry | not-accessible | current | Entry consisting of configuration data for a RADIUS accounting server. |
| 1.3.6.1.4.1.248.12.8.1.6.1.1 | Columnhm2AgentRadiusAccountingServerIndex | not-accessible | current | Unique index of the configured RADIUS accounting server. The next valid value of this object for creation is specified by hm2AgentRadiusAccountingIndexNextVali… |
| 1.3.6.1.4.1.248.12.8.1.6.1.2 | Columnhm2AgentRadiusAccountingServerAddress | read-create | deprecated | This object is deprecated in favour of hm2AgentRadiusAccountingServerAddr. IP Address of the configured RADIUS accounting server. This object cannot be changed… |
| 1.3.6.1.4.1.248.12.8.1.6.1.3 | Columnhm2AgentRadiusAccountingServerAddressType | read-create | deprecated | This object is deprecated in favour of hm2AgentRadiusAccountingServerAddrType. IP Address Type of the configured RADIUS accounting server. This object cannot b… |
| 1.3.6.1.4.1.248.12.8.1.6.1.4 | Columnhm2AgentRadiusAccountingPort | read-write | current | Port number for the RADIUS accounting server. |
| 1.3.6.1.4.1.248.12.8.1.6.1.5 | Columnhm2AgentRadiusAccountingSecret | read-write | current | Configured shared sercret for the RADIUS accounting server. |
| 1.3.6.1.4.1.248.12.8.1.6.1.6 | Columnhm2AgentRadiusAccountingStatus | read-create | current | Creates or destroys a RADIUS accounting server entry. During creation, the next available index is specified by the hm2AgentRadiusAccountingIndexNextValid obje… |
| 1.3.6.1.4.1.248.12.8.1.6.1.7 | Columnhm2AgentRadiusAccountingServerName | read-create | current | Configured identification name for the RADIUS accounting server. |
| 1.3.6.1.4.1.248.12.8.1.6.1.248 | Columnhm2AgentRadiusAccountingServerAddrType | read-create | current | Inet address type of the configured RADIUS accounting server. This object cannot be changed after creation. |
| 1.3.6.1.4.1.248.12.8.1.6.1.249 | Columnhm2AgentRadiusAccountingServerAddr | read-create | current | Inet address of the configured RADIUS accounting server. This object cannot be changed after creation. |
| 1.3.6.1.4.1.248.12.8.1.7 | Scalarhm2AgentRadiusServerIndexNextValid | read-only | current | Indicates the next valid index into the hm2AgentRadiusServerConfigTable for creation. If no additional entries are allowed, this will be 0. |
| 1.3.6.1.4.1.248.12.8.1.8 | Tablehm2AgentRadiusServerConfigTable | not-accessible | current | Table with information about RADIUS authentication server IP addresses, port numbers and shared secrets. |
| 1.3.6.1.4.1.248.12.8.1.8.1 | Rowhm2AgentRadiusServerConfigEntry | not-accessible | current | Entry consisting of configuration data for a RADIUS authentication server. |
| 1.3.6.1.4.1.248.12.8.1.8.1.1 | Columnhm2AgentRadiusServerIndex | not-accessible | current | Unique index of the configured RADIUS server |
| 1.3.6.1.4.1.248.12.8.1.8.1.3 | Columnhm2AgentRadiusServerAddressType | read-create | deprecated | This object is deprecated in favour of hm2AgentRadiusServerInetAddrType. IP Address Type of the configured RADIUS server. This object cannot be changed after c… |
| 1.3.6.1.4.1.248.12.8.1.8.1.4 | Columnhm2AgentRadiusServerPort | read-write | current | Port number for the RADIUS server. |
| 1.3.6.1.4.1.248.12.8.1.8.1.5 | Columnhm2AgentRadiusServerSecret | read-write | current | Configured shared sercret for the RADIUS server. |
| 1.3.6.1.4.1.248.12.8.1.8.1.6 | Columnhm2AgentRadiusServerPrimaryMode | read-write | current | Configure the RADIUS server to be the primary server. If there is any other server that is configured to be primary, that server is set to be a seconday server… |
| 1.3.6.1.4.1.248.12.8.1.8.1.7 | Columnhm2AgentRadiusServerCurrentMode | read-only | current | Indicate if the RADIUS server is the current server in use for authentication. |
| 1.3.6.1.4.1.248.12.8.1.8.1.8 | Columnhm2AgentRadiusServerMsgAuth | read-write | current | Enable or disable the message authenticator attribute for this RADIUS server. |
| 1.3.6.1.4.1.248.12.8.1.8.1.9 | Columnhm2AgentRadiusServerRowStatus | read-create | current | Creates or destroys a RADIUS authentication server entry. During creation, the next available index is specified by the hm2AgentRadiusServerIndexNextValid obje… |
| 1.3.6.1.4.1.248.12.8.1.8.1.10 | Columnhm2AgentRadiusServerName | read-create | current | Configured identification name for the RADIUS server. |
| 1.3.6.1.4.1.248.12.8.1.8.1.11 | Columnhm2AgentRadiusServerInetAddress | read-create | deprecated | This object is deprecated in favour of hm2AgentRadiusServerInetAddr. IP Address of the configured RADIUS server. This object cannot be changed after creation. |
| 1.3.6.1.4.1.248.12.8.1.8.1.12 | Columnhm2AgentRadiusServerTimeout | read-write | current | Time out duration (in seconds) before packets are retransmitted. Note that hm2AgentRadiusTimeout will override this MIB object: - During row creation, hm2Agent… |
| 1.3.6.1.4.1.248.12.8.1.8.1.13 | Columnhm2AgentRadiusServerRetransmit | read-write | current | Maximum number of retransmissions of a RADIUS request packet Note that hm2AgentRadiusMaxTransmit will override this MIB object: - During row creation, hm2Agent… |
| 1.3.6.1.4.1.248.12.8.1.8.1.14 | Columnhm2AgentRadiusServerDeadtime | read-write | current | Length of time (in minutes) for which a RADIUS server is skipped over by transaction requests. Note that hm2AgentRadiusDeadTime will override this MIB object: … |
| 1.3.6.1.4.1.248.12.8.1.8.1.15 | Columnhm2AgentRadiusServerSourceIPAddr | read-write | current | Source IP address that will be used for the communication with RADIUS servers. Note that hm2AgentRadiusSourceIPAddr will override this MIB object: - During row… |
| 1.3.6.1.4.1.248.12.8.1.8.1.16 | Columnhm2AgentRadiusServerPriority | read-write | current | Priority specifies the order in which the servers will be used, where 0 is the highest priority in radius server config mode. |
| 1.3.6.1.4.1.248.12.8.1.8.1.17 | Columnhm2AgentRadiusServerUsageType | read-write | current | Specify the usage type of the server. |
| 1.3.6.1.4.1.248.12.8.1.8.1.248 | Columnhm2AgentRadiusServerInetAddrType | read-create | current | Inet address type of the configured RADIUS server. This object cannot be changed after creation. |
| 1.3.6.1.4.1.248.12.8.1.8.1.249 | Columnhm2AgentRadiusServerInetAddr | read-create | current | Inet address of the configured RADIUS server. This object cannot be changed after creation. |
| 1.3.6.1.4.1.248.12.8.1.9 | Scalarhm2AgentRadiusAuthenticationServers | read-only | current | Number of RADIUS authentication servers that have been configured. |
| 1.3.6.1.4.1.248.12.8.1.10 | Scalarhm2AgentRadiusAccountingServers | read-only | current | Number of RADIUS accounting servers that have been configured. |
| 1.3.6.1.4.1.248.12.8.1.11 | Scalarhm2AgentRadiusNamedAuthenticationServerGroups | read-only | current | Number of configured RADIUS named authentication server groups. |
| 1.3.6.1.4.1.248.12.8.1.12 | Scalarhm2AgentRadiusNamedAccountingServerGroups | read-only | current | Number of configured RADIUS named accounting server groups. |
| 1.3.6.1.4.1.248.12.8.1.13 | Scalarhm2AgentRadiusDeadTime | read-write | current | Length of time (in minutes) for which a RADIUS server is skipped over by transaction requests. |
| 1.3.6.1.4.1.248.12.8.1.15 | Scalarhm2AgentRadiusSourceIPAddr | read-write | current | Source IP address that will be used for the communication with RADIUS servers. |
| 1.3.6.1.4.1.248.12.8.1.16 | Scalarhm2AgentRadiusNasIpAddress | read-write | current | Used to set the NAS-IP address for the radius server. |
| 1.3.6.1.4.1.248.12.8.1.17 | Scalarhm2AgentAuthorizationNetworkRadiusMode | read-write | current | Used to enable/disable VLAN assignment mode. |
| 1.3.6.1.4.1.248.12.8.1.18 | Scalarhm2AgentRadiusSourceInterface | read-write | current | A source-interface selection on an Interface Index (like vlan based routing interface, port based routing interface, loopback interface). A non-zero value indi… |
| 1.3.6.1.4.1.248.12.8.2 | Nodehm2SNMPExtensionRadiusGroup | |||
| 1.3.6.1.4.1.248.12.8.2.1 | Identityhm2SNMPExtensionRadiusVLANAssignModeInvalid | current | Indicates that the VLAN assignment mode contains an invalid value. It can only be enabled or disabled. | |
| 1.3.6.1.4.1.248.12.8.2.2 | Identityhm2SNMPExtensionRadiusServerDeadTimeInvalid | current | Indicates that the radius authentication server entry contains an invalid value for dead time that cannot be processed. | |
| 1.3.6.1.4.1.248.12.8.2.3 | Identityhm2SNMPExtensionRadiusServerSecretInvalid | current | Indicates that the radius authentication server entry contains an invalid value for secret that cannot be processed. | |
| 1.3.6.1.4.1.248.12.8.2.4 | Identityhm2SNMPExtensionRadiusServerPrimaryModeInvalid | current | Indicates that the radius authentication server entry contains an invalid value for primary server that cannot be processed. | |
| 1.3.6.1.4.1.248.12.8.2.5 | Identityhm2SNMPExtensionRadiusServerNameInvalid | current | Indicates that the radius authentication server entry contains an invalid value for server name that cannot be processed. | |
| 1.3.6.1.4.1.248.12.8.2.6 | Identityhm2SNMPExtensionRadiusRetransmitInvalid | current | Indicates that the radius global entry contains an invalid value for retransmits (max.) that cannot be processed. | |
| 1.3.6.1.4.1.248.12.8.2.7 | Identityhm2SNMPExtensionRadiusTimeoutInvalid | current | Indicates that the radius global entry contains an invalid value for timeout(s) that cannot be processed. | |
| 1.3.6.1.4.1.248.12.8.2.8 | Identityhm2SNMPExtensionRadiusNASIPAddrInvalid | current | Indicates that the radius global entry contains an invalid value for NAS IP address(attribute 4) that cannot be processed. | |
| 1.3.6.1.4.1.248.12.8.2.9 | Identityhm2SNMPExtensionRadiusServerMSGAuthInvalid | current | Indicates that the message authenticator contains an invalid value. It can only be enabled or disabled. | |
| 1.3.6.1.4.1.248.12.8.2.10 | Identityhm2SNMPExtensionRadiusServerUsageTypeInvalid | current | Indicates that the entry for server usage type is invalid. It can only have values 'all' or 'login'. |