HM2-TIMESYNC-MIB
193 objects
Hirschmann Time Sync MIB. Copyright (C) 2011. All Rights Reserved.
Imported Objects
| HM2-TC-MIB | -- RFC4001 HmEnabledStatus hm2ConfigurationMibs HmTimeSeconds1970 |
| IF-MIB | ifIndex InterfaceIndexOrZero |
| INET-ADDRESS-MIB | InetAddress InetAddressType InetPortNumber |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | -- RFC 2578 TEXTUAL-CONVENTION DisplayString RowStatus TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.248.11.50 | Identityhm2TimeSyncMib | Hirschmann Time Sync MIB. Copyright (C) 2011. All Rights Reserved. | ||
| 1.3.6.1.4.1.248.11.50.0 | Nodehm2TimeSyncMibNotifications | |||
| 1.3.6.1.4.1.248.11.50.0.1 | Notificationhm2Ptp2SynchronizationChange | current | This notification is sent if the PTP synchronization status is changed. | |
| 1.3.6.1.4.1.248.11.50.0.10 | Notificationhm2SntpClientSynchronizationChangeTrap | current | This notification is sent if the SNTP synchronization status (hm2SntpClientStatus) is changed. | |
| 1.3.6.1.4.1.248.11.50.0.20 | Notificationhm2Dot1asSynchronizationChange | current | This notification is sent if the dot1as synchronization status is changed. | |
| 1.3.6.1.4.1.248.11.50.1 | Nodehm2TimeSyncMibObjects | |||
| 1.3.6.1.4.1.248.11.50.1.1 | Nodehm2SystemTimeGroup | |||
| 1.3.6.1.4.1.248.11.50.1.1.1 | Scalarhm2SystemUtcTime | read-write | current | Time measured in seconds since 00:00:00 UTC, January 1, 1970. The clock of the device may be set using this variable. |
| 1.3.6.1.4.1.248.11.50.1.1.2 | Scalarhm2SystemTimeSource | read-only | current | Shows the source of the system time. |
| 1.3.6.1.4.1.248.11.50.1.1.3 | Scalarhm2SystemLocalTime | read-write | current | The current local time. This includes the timezone offset and if supported summertime offset. Measured in seconds since 00:00:00, January 1, 1970. |
| 1.3.6.1.4.1.248.11.50.1.1.4 | Scalarhm2SystemLocalOffset | read-write | current | The difference between the local timezone and UTC in minutes. |
| 1.3.6.1.4.1.248.11.50.1.2 | Nodehm2SntpGroup | |||
| 1.3.6.1.4.1.248.11.50.1.2.1 | Nodehm2SntpServerGroup | |||
| 1.3.6.1.4.1.248.11.50.1.2.1.1 | Scalarhm2SntpServerAdminState | read-write | current | Enables/disables SNTP server admin mode. |
| 1.3.6.1.4.1.248.11.50.1.2.1.2 | Scalarhm2SntpServerPort | read-write | current | The local port number used to listen for client requests. |
| 1.3.6.1.4.1.248.11.50.1.2.1.3 | Scalarhm2SntpServerOnlyIfSync | read-write | current | The SNTP server is enabled only if synchronized to another external time reference. (e.g. NTP or PTP). |
| 1.3.6.1.4.1.248.11.50.1.2.1.4 | Scalarhm2SntpServerStatus | read-only | current | Operational status of the SNTP server. |
| 1.3.6.1.4.1.248.11.50.1.2.1.5 | Scalarhm2SntpServerInterface | read-write | current | Interface used by the SNTP server. |
| 1.3.6.1.4.1.248.11.50.1.2.2 | Nodehm2SntpServerBroadcastGroup | |||
| 1.3.6.1.4.1.248.11.50.1.2.2.1 | Scalarhm2SntpServerBroadcastAdminState | read-write | current | Enables/disables SNTP server broadcast admin mode. |
| 1.3.6.1.4.1.248.11.50.1.2.2.2 | Scalarhm2SntpServerBroadcastAddrType | read-write | current | Address type. |
| 1.3.6.1.4.1.248.11.50.1.2.2.3 | Scalarhm2SntpServerBroadcastAddr | read-write | current | Destination address for SNTP broadcast or multicast. |
| 1.3.6.1.4.1.248.11.50.1.2.2.4 | Scalarhm2SntpServerBroadcastPort | read-write | current | The port number to send the broadcast packets to the clients. |
| 1.3.6.1.4.1.248.11.50.1.2.2.5 | Scalarhm2SntpServerBroadcastInterval | read-write | current | Interval of SNTP broadcast messages send in seconds. |
| 1.3.6.1.4.1.248.11.50.1.2.2.10 | Tablehm2SntpServerBroadcastVlanTable | not-accessible | current | This table contains all VLANs used for SNTP server broadcast or multicast messages. |
| 1.3.6.1.4.1.248.11.50.1.2.2.10.1 | Rowhm2SntpServerBroadcastVlanEntry | not-accessible | current | The SNTP broadcast server VLAN objects. |
| 1.3.6.1.4.1.248.11.50.1.2.2.10.1.1 | Columnhm2SntpServerBroadcastVlan | read-only | current | VLAN used for SNTP server broadcast or multicast messages. |
| 1.3.6.1.4.1.248.11.50.1.2.2.10.1.2 | Columnhm2SntpServerBroadcastVlanRowStatus | read-create | current | Indicates the status of an entry in this table, and is used to create/delete entries. Objects within this table can by changed while the status is 'active'. |
| 1.3.6.1.4.1.248.11.50.1.2.3 | Nodehm2SntpClientGroup | |||
| 1.3.6.1.4.1.248.11.50.1.2.3.1 | Scalarhm2SntpClientAdminState | read-write | current | Enables/disables the SNTP client admin mode. |
| 1.3.6.1.4.1.248.11.50.1.2.3.2 | Scalarhm2SntpClientOperatingMode | read-write | current | Enables/disables SNTP client operating mode. In 'unicast' mode, the client sends a request to a designated unicast server and expects a reply from that server.… |
| 1.3.6.1.4.1.248.11.50.1.2.3.3 | Scalarhm2SntpClientDisableAfterSync | read-write | current | When set to 'enable' the SNTP client is disabled after the device is synchronized the first time successfully to a SNTP server. |
| 1.3.6.1.4.1.248.11.50.1.2.3.4 | Scalarhm2SntpClientRequestInterval | read-write | current | SNTP client request interval in seconds. |
| 1.3.6.1.4.1.248.11.50.1.2.3.5 | Scalarhm2SntpClientStatus | read-only | current | Overall operational status of the SNTP client. |
| 1.3.6.1.4.1.248.11.50.1.2.3.6 | Scalarhm2SntpClientBroadcastRecvTimeout | read-write | current | Time in seconds after the client in broadcast client mode will change the status from 'synchronizedToRemoteServer' to 'notSynchronized' if no broadcast packets… |
| 1.3.6.1.4.1.248.11.50.1.2.3.7 | Scalarhm2SntpClientInterface | read-write | current | Interface used by the SNTP client. |
| 1.3.6.1.4.1.248.11.50.1.2.3.10 | Tablehm2SntpClientServerAddrTable | not-accessible | current | This table contains objects to configure SNTP client connections. |
| 1.3.6.1.4.1.248.11.50.1.2.3.10.1 | Rowhm2SntpClientServerAddrEntry | not-accessible | current | The SNTP client connection objects. |
| 1.3.6.1.4.1.248.11.50.1.2.3.10.1.1 | Columnhm2SntpClientServerIndex | not-accessible | current | Index for server table. |
| 1.3.6.1.4.1.248.11.50.1.2.3.10.1.2 | Columnhm2SntpClientServerAddrType | read-create | current | Address type. |
| 1.3.6.1.4.1.248.11.50.1.2.3.10.1.3 | Columnhm2SntpClientServerAddr | read-create | current | The address of the external time server. |
| 1.3.6.1.4.1.248.11.50.1.2.3.10.1.4 | Columnhm2SntpClientServerPort | read-create | current | The port number of the external time server. |
| 1.3.6.1.4.1.248.11.50.1.2.3.10.1.5 | Columnhm2SntpClientServerDescr | read-create | current | The description of the server configured. |
| 1.3.6.1.4.1.248.11.50.1.2.3.10.1.6 | Columnhm2SntpClientServerStatus | read-only | current | Status of the SNTP client - server connection. |
| 1.3.6.1.4.1.248.11.50.1.2.3.10.1.7 | Columnhm2SntpClientServerRowStatus | read-create | current | Indicates the status of an entry in this table, and is used to create/delete entries. Objects within this table can by changed while the status is 'active'. |
| 1.3.6.1.4.1.248.11.50.1.3 | Nodehm2NtpGroup | |||
| 1.3.6.1.4.1.248.11.50.1.3.1 | Nodehm2NtpGeneralGroup | |||
| 1.3.6.1.4.1.248.11.50.1.3.1.1 | Scalarhm2NtpOperatingState | read-only | current | Operational status of the NTP server/client. |
| 1.3.6.1.4.1.248.11.50.1.3.2 | Nodehm2NtpServerGroup | |||
| 1.3.6.1.4.1.248.11.50.1.3.2.1 | Nodehm2NtpServerConfigGroup | |||
| 1.3.6.1.4.1.248.11.50.1.3.2.1.1 | Scalarhm2NtpServerAdminState | read-write | current | Enables/disables the NTP server. |
| 1.3.6.1.4.1.248.11.50.1.3.2.1.2 | Scalarhm2NtpServerOperatingMode | read-write | current | NTP server operating mode. |
| 1.3.6.1.4.1.248.11.50.1.3.2.1.3 | Scalarhm2NtpServerLocalClockStratum | read-write | current | The stratum to be used for the case that the server is only synchronized to the local clock |
| 1.3.6.1.4.1.248.11.50.1.3.3 | Nodehm2NtpClientGroup | |||
| 1.3.6.1.4.1.248.11.50.1.3.3.1 | Nodehm2NtpClientConfigGroup | |||
| 1.3.6.1.4.1.248.11.50.1.3.3.1.1 | Scalarhm2NtpClientAdminState | read-write | current | Enables/disables the NTP client. |
| 1.3.6.1.4.1.248.11.50.1.3.3.1.2 | Scalarhm2NtpClientOperatingMode | read-write | current | NTP client operating mode. |
| 1.3.6.1.4.1.248.11.50.1.3.3.4 | Tablehm2NtpClientServerAddrTable | not-accessible | current | This table contains variables for each interface of the switch. |
| 1.3.6.1.4.1.248.11.50.1.3.3.4.1 | Rowhm2NtpClientServerAddrEntry | not-accessible | current | This entry contains variables for each interface of the switch. |
| 1.3.6.1.4.1.248.11.50.1.3.3.4.1.1 | Columnhm2NtpClientServerIndex | not-accessible | current | Index for Server table. |
| 1.3.6.1.4.1.248.11.50.1.3.3.4.1.2 | Columnhm2NtpClientServerAddressType | read-create | current | Address type for external time server. Currently, only IPv4, IPv6 and DNS are supported. |
| 1.3.6.1.4.1.248.11.50.1.3.3.4.1.3 | Columnhm2NtpClientServerAddress | read-create | current | The address of the external time server. |
| 1.3.6.1.4.1.248.11.50.1.3.3.4.1.4 | Columnhm2NtpClientServerPort | read-create | current | The port number of the external time server. Zero is not allowed as port number. |
| 1.3.6.1.4.1.248.11.50.1.3.3.4.1.5 | Columnhm2NtpClientServerInitialBurst | read-create | current | The initial burst is intended to speed up the initial synchronization. Use with caution as it can cause a overload situation on the server. |
| 1.3.6.1.4.1.248.11.50.1.3.3.4.1.6 | Columnhm2NtpClientServerBurst | read-create | current | The burst mode can be used to increase the precision on links with high jitter e.g. GSM/UMTS links |
| 1.3.6.1.4.1.248.11.50.1.3.3.4.1.7 | Columnhm2NtpClientServerPrefer | read-create | current | The prefer flag can be used to mark the peer as preferred. Among a set of correctly operating peers, this one will be chosen as synchronization source. |
| 1.3.6.1.4.1.248.11.50.1.3.3.4.1.10 | Columnhm2NtpClientServerStatus | read-only | current | Status of the NTP client server connection. |
| 1.3.6.1.4.1.248.11.50.1.3.3.4.1.11 | Columnhm2NtpClientServerRowStatus | read-create | current | Indicates the status of an entry in this table, and is used to create/delete entries. Objects within this table can be changed while the status is 'active'. |
| 1.3.6.1.4.1.248.11.50.1.3.3.5 | Tablehm2NtpClientListenAddrTable | not-accessible | current | Client table. |
| 1.3.6.1.4.1.248.11.50.1.3.3.5.1 | Rowhm2NtpClientListenAddrEntry | not-accessible | current | Client entry. |
| 1.3.6.1.4.1.248.11.50.1.3.3.5.1.1 | Columnhm2NtpClientListenAddrIndex | not-accessible | current | Index for server table. |
| 1.3.6.1.4.1.248.11.50.1.3.3.5.1.2 | Columnhm2NtpClientListenAddrAddressType | read-create | current | Address type for external time server. Currently, only IPv4, IPv6 and DNS are supported. |
| 1.3.6.1.4.1.248.11.50.1.3.3.5.1.3 | Columnhm2NtpClientListenAddrAddress | read-create | current | The address of the external time server. |
| 1.3.6.1.4.1.248.11.50.1.3.3.5.1.4 | Columnhm2NtpClientListenAddrPort | read-create | current | The port number of the external time server. Zero is not allowed as port number. |
| 1.3.6.1.4.1.248.11.50.1.3.3.5.1.10 | Columnhm2NtpClientListenAddrStatus | read-only | current | Status of the NTP client server connection. |
| 1.3.6.1.4.1.248.11.50.1.3.3.5.1.11 | Columnhm2NtpClientListenAddrRowStatus | read-create | current | Indicates the status of an entry in this table, and is used to create/delete entries. Objects within this table can by changed while the status is 'active'. |
| 1.3.6.1.4.1.248.11.50.1.4 | Nodehm2PtpGroup | |||
| 1.3.6.1.4.1.248.11.50.1.4.1 | Nodehm2PtpGlobal | |||
| 1.3.6.1.4.1.248.11.50.1.4.1.1 | Scalarhm2PtpEnable | read-write | current | Enable or disable the Precision Time Protocol (PTP) on this node. |
| 1.3.6.1.4.1.248.11.50.1.4.1.2 | Scalarhm2PtpClockMode | read-write | current | This members value shall indicate which clock mode is used. |
| 1.3.6.1.4.1.248.11.50.1.4.1.3 | Scalarhm2PtpProfile | read-write | current | Configures PTP parameters to a specific profile. Setting the object to user-defined (1) has no effect. |
| 1.3.6.1.4.1.248.11.50.1.4.1.4 | Scalarhm2PtpIsSynchronized | read-only | current | If the clock is synchronized to the current Master this object is set to true. Otherwise it is set to false. The clock sets this object to true, if the offset … |
| 1.3.6.1.4.1.248.11.50.1.4.1.5 | Scalarhm2PtpSyncLowerBound | read-write | current | This object defines when the hm2PtpIsSynchronized object is set to true. If the absolute value of the offset is smaller than hm2PtpSyncLowerBound, the hm2PtpIs… |
| 1.3.6.1.4.1.248.11.50.1.4.1.6 | Scalarhm2PtpSyncUpperBound | read-write | current | This object defines when the hm2PtpIsSynchronized object is set to false. If the absolute value of the offset is bigger than hm2PtpSyncUpperBound, the hm2PtpIs… |
| 1.3.6.1.4.1.248.11.50.1.4.1.7 | Scalarhm2PtpAbsMaxOffset | read-only | current | This members value shall indicate the absolute value for the maximum offset between its parent and this node. The value is set to zero if the offset is the fir… |
| 1.3.6.1.4.1.248.11.50.1.4.1.8 | Scalarhm2PtpTimeSeconds | read-only | current | Current PTP time in PTP timescale |
| 1.3.6.1.4.1.248.11.50.1.4.1.9 | Scalarhm2PtpManagement | read-write | current | If set to true PTP management via PTP management messages is enabled. |
| 1.3.6.1.4.1.248.11.50.1.4.2 | Nodehm2Ptp2Objects | |||
| 1.3.6.1.4.1.248.11.50.1.4.2.1 | Nodehm2Ptp2Configuration | |||
| 1.3.6.1.4.1.248.11.50.1.4.2.1.1 | Scalarhm2Ptp2TwoStepClock | read-only | current | A value of true indicates that this node is a two-step device. |
| 1.3.6.1.4.1.248.11.50.1.4.2.1.2 | Scalarhm2Ptp2ClockIdentity | read-only | current | This value is the clock identity of the local clock. |
| 1.3.6.1.4.1.248.11.50.1.4.2.1.3 | Scalarhm2Ptp2ClockQuality | read-only | current | Clock quality of the local clock. |
| 1.3.6.1.4.1.248.11.50.1.4.2.1.4 | Scalarhm2Ptp2ClockClass | read-only | current | First octet of hm2Ptp2ClockQuality. This represents the clock class of the local clock. |
| 1.3.6.1.4.1.248.11.50.1.4.2.1.5 | Scalarhm2Ptp2ClockAccuracy | read-only | current | Second octet of hm2Ptp2ClockQuality. This represents the clock accuracy of the local clock. |
| 1.3.6.1.4.1.248.11.50.1.4.2.1.6 | Scalarhm2Ptp2ClockVariance | read-only | current | Last two octets of hm2Ptp2ClockQuality. This represents the clock variance of the local clock. |
| 1.3.6.1.4.1.248.11.50.1.4.2.1.7 | Scalarhm2Ptp2Priority1 | read-write | current | Priority 1 value of the local clock |
| 1.3.6.1.4.1.248.11.50.1.4.2.1.8 | Scalarhm2Ptp2Priority2 | read-write | current | Priority 2 value of the local clock |
| 1.3.6.1.4.1.248.11.50.1.4.2.1.9 | Scalarhm2Ptp2DomainNumber | read-write | current | PTP domain number of the local clock. |
| 1.3.6.1.4.1.248.11.50.1.4.2.1.10 | Scalarhm2Ptp2StepsRemoved | read-only | current | The value of hm2Ptp2StepsRemoved is the number of communication paths traversed between the local clock and the grandmaster clock. |
| 1.3.6.1.4.1.248.11.50.1.4.2.1.11 | Scalarhm2Ptp2OffsetFromMaster | read-only | current | Current value of the time difference between master and slave measured by this clock. |
| 1.3.6.1.4.1.248.11.50.1.4.2.1.12 | Scalarhm2Ptp2MeanPathDelay | read-only | current | Current value of the mean propagation time (e2e-delay) between Master and Slave. This is only valid if hm2Ptp2DelayMechanism is set to e2e on the current slave… |
| 1.3.6.1.4.1.248.11.50.1.4.2.1.13 | Scalarhm2Ptp2ParentPortIdentity | read-only | current | The port identity value of the port on the master that issues the synchronization messages used to synchronize this clock. |
| 1.3.6.1.4.1.248.11.50.1.4.2.1.14 | Scalarhm2Ptp2ParentStats | read-only | current | A value of True indicates that the objects hm2Ptp2ObservedParentOffsetScaledLogVariance and hm2Ptp2ObservedParentClockPhaseChangeRate are valid. |
| 1.3.6.1.4.1.248.11.50.1.4.2.1.15 | Scalarhm2Ptp2ObservedParentOffsetScaledLogVariance | read-only | current | Estimate of the parent clocks PTP variance observed by this clock. |
| 1.3.6.1.4.1.248.11.50.1.4.2.1.16 | Scalarhm2Ptp2ObservedParentClockPhaseChangeRate | read-only | current | Estimate of the phase change rate (drift) observed by this clock. |
| 1.3.6.1.4.1.248.11.50.1.4.2.1.17 | Scalarhm2Ptp2GrandmasterIdentity | read-only | current | ClockIdentity of the Grandmaster clock synchronizing this clock. |
| 1.3.6.1.4.1.248.11.50.1.4.2.1.18 | Scalarhm2Ptp2GrandmasterClockQuality | read-only | current | ClockQuality of the Grandmaster clock synchronizing this clock. |
| 1.3.6.1.4.1.248.11.50.1.4.2.1.19 | Scalarhm2Ptp2GrandmasterClockClass | read-only | current | First octet of hm2Ptp2GrandmasterClockQuality. This represents the grand masters clock class. |
| 1.3.6.1.4.1.248.11.50.1.4.2.1.20 | Scalarhm2Ptp2GrandmasterClockAccuracy | read-only | current | Second octet of hm2Ptp2GrandmasterClockAccuracy. This represents the grand masters clock accuracy. |
| 1.3.6.1.4.1.248.11.50.1.4.2.1.21 | Scalarhm2Ptp2GrandmasterClockVariance | read-only | current | Last two octets of hm2Ptp2GrandmasterClockQuality. This represents the grand masters clock variance. |
| 1.3.6.1.4.1.248.11.50.1.4.2.1.22 | Scalarhm2Ptp2GrandmasterPriority1 | read-only | current | Priority 1 value of the grand master clock. |
| 1.3.6.1.4.1.248.11.50.1.4.2.1.23 | Scalarhm2Ptp2GrandmasterPriority2 | read-only | current | Priority 2 value of the grand master clock. |
| 1.3.6.1.4.1.248.11.50.1.4.2.1.24 | Scalarhm2Ptp2CurrentUtcOffset | read-write | current | Current difference between the PTP timescale (TAI) and UTC in seconds. |
| 1.3.6.1.4.1.248.11.50.1.4.2.1.25 | Scalarhm2Ptp2CurrentUtcOffsetValid | read-write | current | A value of True indicates that the hm2Ptp2CurrentUtcOffset is known to be correct. |
| 1.3.6.1.4.1.248.11.50.1.4.2.1.26 | Scalarhm2Ptp2Leap59 | read-only | current | A value of true indicates that the last minute of the current UTC day contains 59 seconds. |
| 1.3.6.1.4.1.248.11.50.1.4.2.1.27 | Scalarhm2Ptp2Leap61 | read-only | current | A value of true indicates that the last minute of the current UTC day contains 61 seconds. |
| 1.3.6.1.4.1.248.11.50.1.4.2.1.28 | Scalarhm2Ptp2TimeTraceable | read-only | current | A value of True indicates that the current time is traceable to a primary reference. |
| 1.3.6.1.4.1.248.11.50.1.4.2.1.29 | Scalarhm2Ptp2FrequencyTraceable | read-only | current | A value of True indicates that the frequency determining the timescale is traceable to a primary reference. |
| 1.3.6.1.4.1.248.11.50.1.4.2.1.30 | Scalarhm2Ptp2PtpTimescale | read-only | current | A value of True indicates that the clocks timescale is PTP. |
| 1.3.6.1.4.1.248.11.50.1.4.2.1.31 | Scalarhm2Ptp2TimeSource | read-write | current | The source of time used by the Grandmaster clock. |
| 1.3.6.1.4.1.248.11.50.1.4.2.2 | Tablehm2Ptp2PortTable | not-accessible | current | This table contains variables for each PTP2 port of the switch. |
| 1.3.6.1.4.1.248.11.50.1.4.2.2.1 | Rowhm2Ptp2PortEntry | not-accessible | current | Entry for one port. |
| 1.3.6.1.4.1.248.11.50.1.4.2.2.1.1 | Columnhm2Ptp2PortEnable | read-write | current | Enable or disable the sending and receiving / processing of PTP synchronization messages. |
| 1.3.6.1.4.1.248.11.50.1.4.2.2.1.2 | Columnhm2Ptp2PortState | read-only | current | State of the PTP2 port instance. |
| 1.3.6.1.4.1.248.11.50.1.4.2.2.1.3 | Columnhm2Ptp2LogDelayReqInterval | read-only | current | Logarithm to the base of 2 of the minimum DelayRequest interval used to measure the e2e-delay. |
| 1.3.6.1.4.1.248.11.50.1.4.2.2.1.4 | Columnhm2Ptp2PeerMeanPathDelay | read-only | current | If hm2Ptp2DelayMechanism is set to p2p this value is an estimate of the current one-way propagation delay (p2p-delay). |
| 1.3.6.1.4.1.248.11.50.1.4.2.2.1.5 | Columnhm2Ptp2LogAnnounceInterval | read-write | current | Logarithm to the base of 2 of the mean announce interval. |
| 1.3.6.1.4.1.248.11.50.1.4.2.2.1.6 | Columnhm2Ptp2AnnounceReceiptTimeout | read-write | current | Announce receipt timeout in multiples of hm2Ptp2LogAnnounceInterval. |
| 1.3.6.1.4.1.248.11.50.1.4.2.2.1.7 | Columnhm2Ptp2LogSyncInterval | read-write | current | Logarithm to the base of 2 of the mean synchronization interval. |
| 1.3.6.1.4.1.248.11.50.1.4.2.2.1.8 | Columnhm2Ptp2DelayMechanism | read-write | current | This value indicates the propagation delay measuring option used by this port. |
| 1.3.6.1.4.1.248.11.50.1.4.2.2.1.9 | Columnhm2Ptp2LogPdelayReqInterval | read-write | current | Logarithm to the base of 2 of the minimum PDelay Request interval (used for p2p-delay). |
| 1.3.6.1.4.1.248.11.50.1.4.2.2.1.10 | Columnhm2Ptp2VersionNumber | read-write | current | PTP version in use on this port (always ptpVersion2). |
| 1.3.6.1.4.1.248.11.50.1.4.2.2.1.11 | Columnhm2Ptp2NetworkProtocol | read-write | current | Current configured network transport protocol of this port. |
| 1.3.6.1.4.1.248.11.50.1.4.2.2.1.12 | Columnhm2Ptp2V1Compatibility | read-write | current | If set to on all PTPv2 messages will be padded to the length of a PTPv1 frame. This is required by some hardware. |
| 1.3.6.1.4.1.248.11.50.1.4.2.2.1.13 | Columnhm2Ptp2DelayAsymmetry | read-write | current | Asymmetry of the link connected to this port in nanoseconds. The hm2Ptp2DelayAsymmetry is positive when the master-to-slave propagation time is longer than the… |
| 1.3.6.1.4.1.248.11.50.1.4.2.2.1.14 | Columnhm2Ptp2PortCapability | read-only | current | This object shows the capability of the ptp port. |
| 1.3.6.1.4.1.248.11.50.1.4.2.2.1.15 | Columnhm2Ptp2VlanID | read-write | current | VLAN in which PTP packets are send. With a value of -1 all packets are send untagged |
| 1.3.6.1.4.1.248.11.50.1.4.2.2.1.16 | Columnhm2Ptp2VlanPriority | read-write | current | VLAN priority of tagged ptp packets |
| 1.3.6.1.4.1.248.11.50.1.4.3 | Nodehm2Ptp2TCObjects | |||
| 1.3.6.1.4.1.248.11.50.1.4.3.1 | Nodehm2Ptp2TCConfiguration | |||
| 1.3.6.1.4.1.248.11.50.1.4.3.1.1 | Scalarhm2Ptp2TCClockIdentity | read-only | current | This value is the clock identity of the transparent clock. |
| 1.3.6.1.4.1.248.11.50.1.4.3.1.2 | Scalarhm2Ptp2TCDelayMechanism | read-write | current | Configures the transparent clock to be either a e2e- or p2p-transparent clock. If supported a value of e2e-optimized sets the clock to e2e mode where delay req… |
| 1.3.6.1.4.1.248.11.50.1.4.3.1.3 | Scalarhm2Ptp2TCPrimaryDomain | read-write | current | PTP domain number of the primary syntonization domain. |
| 1.3.6.1.4.1.248.11.50.1.4.3.1.4 | Scalarhm2Ptp2TCSyntonized | read-write | current | A value of true indicates that the syntonization of the transparent clock is enabled. |
| 1.3.6.1.4.1.248.11.50.1.4.3.1.5 | Scalarhm2Ptp2TCNetworkProtocol | read-write | current | Current configured network transport protocol of the transparent clock. |
| 1.3.6.1.4.1.248.11.50.1.4.3.1.6 | Scalarhm2Ptp2TCCurrentMaster | read-only | current | The port identity value of the port on the master that issues the synchronization messages used to syntonize/synchronize this clock. |
| 1.3.6.1.4.1.248.11.50.1.4.3.1.7 | Scalarhm2Ptp2TCMultiDomainMode | read-write | current | If set to false, PTP messages from domains other than hm2Ptp2TCPrimaryDomain are ignored. |
| 1.3.6.1.4.1.248.11.50.1.4.3.1.8 | Scalarhm2Ptp2TCSyncLocalClock | read-write | current | Enable synchronisation of the local clock (TC hybrid mode). This requires syntonization to be enabled. All transparent clock operations are still done based on… |
| 1.3.6.1.4.1.248.11.50.1.4.3.1.9 | Scalarhm2Ptp2TCOffsetFromMaster | read-only | current | Current value of the time difference between Master and this clock measured by this clock. This object is only valid if hm2Ptp2TCSyncLocalClock is set to true. |
| 1.3.6.1.4.1.248.11.50.1.4.3.1.10 | Scalarhm2Ptp2TCMeanPathDelay | read-only | current | Current value of the mean propagation time (e2e-delay) between Master and Slave. This object is only valid for e2e-transparent-clock and hm2Ptp2TCSyncLocalCloc… |
| 1.3.6.1.4.1.248.11.50.1.4.3.1.11 | Scalarhm2Ptp2TCVlanID | read-write | current | VLAN in which PTP packets are send. With a value of -1 all packets are send untagged. |
| 1.3.6.1.4.1.248.11.50.1.4.3.1.12 | Scalarhm2Ptp2TCVlanPriority | read-write | current | VLAN priority of tagged PTP packets. |
| 1.3.6.1.4.1.248.11.50.1.4.3.1.13 | Scalarhm2Ptp2TCCapability | read-only | current | This object shows the capability of the TC. |
| 1.3.6.1.4.1.248.11.50.1.4.3.2 | Tablehm2Ptp2TCPortTable | not-accessible | current | This table contains variables for each PTP2 TC port of the switch. |
| 1.3.6.1.4.1.248.11.50.1.4.3.2.1 | Rowhm2Ptp2TCPortEntry | not-accessible | current | Entry for one port. |
| 1.3.6.1.4.1.248.11.50.1.4.3.2.1.1 | Columnhm2Ptp2TCPortEnable | read-write | current | Enable or disable the sending and receiving / processing of PTP synchronization messages. |
| 1.3.6.1.4.1.248.11.50.1.4.3.2.1.2 | Columnhm2Ptp2TCLogPdelayReqInterval | read-write | current | Logarithm to the base of 2 of the minimum PDelay Request interval (used for p2p-delay). |
| 1.3.6.1.4.1.248.11.50.1.4.3.2.1.3 | Columnhm2Ptp2TCFaulty | read-only | current | True if port is in Faulty state. |
| 1.3.6.1.4.1.248.11.50.1.4.3.2.1.4 | Columnhm2Ptp2TCPeerMeanPathDelay | read-only | current | This value is an estimate of the current one way propagation delay of a p2p-transparent-clock. |
| 1.3.6.1.4.1.248.11.50.1.4.3.2.1.5 | Columnhm2Ptp2TCDelayAsymmetry | read-write | current | Asymmetry of the link connected to this port in nanoseconds. The hm2Ptp2TCDelayAsymmetry is positive when the master-to-slave propagation time is longer than t… |
| 1.3.6.1.4.1.248.11.50.1.5 | Nodehm2IrigGroup | |||
| 1.3.6.1.4.1.248.11.50.1.5.1 | Scalarhm2IrigAdminStatus | read-write | current | Enables/disables the IRIG-B output. |
| 1.3.6.1.4.1.248.11.50.1.5.2 | Scalarhm2IrigMode | read-write | current | Set the IRIG Mode, allowed values: (See https://wsmrc2vger.wsmr.army.mil/rcc/manuals/200-04/TT-45.pdf) irig-b000 (0) - Mode IRIG B000, BCDtoy, CF, SBS irig-b00… |
| 1.3.6.1.4.1.248.11.50.1.5.3 | Scalarhm2IrigPpsAdminStatus | read-write | current | Enables/disables the pps output. |
| 1.3.6.1.4.1.248.11.50.1.5.4 | Scalarhm2IrigTimeMode | read-write | current | Define the IRIG-B time base (UTC or local). |
| 1.3.6.1.4.1.248.11.50.1.5.5 | Scalarhm2IrigOperStatus | read-only | current | Current operational status of the IRIG-B output. |
| 1.3.6.1.4.1.248.11.50.1.5.6 | Scalarhm2IrigTimeQuality | read-only | current | Current IRIG-B time quality according to IEEE 1344. |
| 1.3.6.1.4.1.248.11.50.1.6 | Nodehm2Dot1asGroup | |||
| 1.3.6.1.4.1.248.11.50.1.6.1 | Nodehm2Dot1asGlobal | |||
| 1.3.6.1.4.1.248.11.50.1.6.1.1 | Scalarhm2Dot1asEnable | read-write | current | Enable or disable the 802.1AS Protocol on this node. |
| 1.3.6.1.4.1.248.11.50.1.6.1.2 | Scalarhm2Dot1asIsSynchronized | read-only | current | If the clock is synchronized to the current Master this object is set to true. Otherwise it is set to false. The clock sets this object to true, if the offset … |
| 1.3.6.1.4.1.248.11.50.1.6.1.3 | Scalarhm2Dot1asSyncLowerBound | read-write | current | This object defines when the hm2dot1asIsSynchronized object is set to true. If the absolute value of the offset is smaller than hm2dot1asSyncLowerBound, the hm… |
| 1.3.6.1.4.1.248.11.50.1.6.1.4 | Scalarhm2Dot1asSyncUpperBound | read-write | current | This object defines when the hm2dot1asIsSynchronized object is set to false. If the absolute value of the offset is bigger than hm2dot1asSyncUpperBound, the hm… |
| 1.3.6.1.4.1.248.11.50.1.6.1.5 | Scalarhm2Dot1asAbsMaxOffset | read-only | current | This members value shall indicate the absolute value for the maximum offset between its parent and this node. The value is set to zero if the offset is the fir… |
| 1.3.6.1.4.1.248.11.50.3 | Nodehm2TimeSyncMibSNMPExtensionGroup | |||
| 1.3.6.1.4.1.248.11.50.3.1 | Nodehm2TimeSyncSystemTimeSESGroup | |||
| 1.3.6.1.4.1.248.11.50.3.2 | Nodehm2TimeSyncSntpSESGroup | |||
| 1.3.6.1.4.1.248.11.50.3.2.1 | Identityhm2TimeSyncSntpSESIpv4PortNumberPairInUse | current | Indicates that the given IPv4 address / port number combination is already in use. | |
| 1.3.6.1.4.1.248.11.50.3.2.2 | Identityhm2TimeSyncSntpSESDnsPortNumberPairInUse | current | Indicates that the given DNS name / port number combination is already in use. | |
| 1.3.6.1.4.1.248.11.50.3.2.3 | Identityhm2TimeSyncSntpSESIpv6PortNumberPairInUse | current | Indicates that the given IPv6 address / port number combination is already in use. | |
| 1.3.6.1.4.1.248.11.50.3.3 | Nodehm2TimeSyncNtpSESGroup | |||
| 1.3.6.1.4.1.248.11.50.3.4 | Nodehm2TimeSyncPtpSESGroup | |||
| 1.3.6.1.4.1.248.11.50.3.4.1 | Identityhm2TimeSyncPtpSESPortIsNotCapable | current | Indicates that the given port number is not PTP capable. | |
| 1.3.6.1.4.1.248.11.50.3.5 | Nodehm2TimeSyncIrigSESGroup | |||
| 1.3.6.1.4.1.248.11.50.3.6 | Nodehm2TimeSyncDot1asSESGroup |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| Hm2Ptp2LogPdelayReqIntervalTc | INTEGER { sec-1 (0), sec-2 (1), sec-4 (2), sec-8 (3), sec-16 (4), sec-32 (5) } | current | Logarithm to the base of 2 of the minimum PDelay Request interval (used for p2p-delay). |
| Hm2Ptp2LogSyncIntervalTc | INTEGER { msec-125 (-3), msec-250 (-2), msec-500 (-1), sec-1 (0), sec-2 (1) } | current | Logarithm to the base of 2 of the mean synchronization interval. |
| HmSntpClientServerStatus | INTEGER { other(1), success(2), requestTimedOut(3), badDateEncoded(4), versionNotSupported(5), serverUnsychronized(6), serverKissOfDeath(7) } | current | The status of the last received response from a configured server. other - None of the following enumeration values. success - The SNTP operation was successful and the system time was updated. requestTimedOut - An SNTP… |
| PtpClockIdentity | OCTET STRING (SIZE (8)) | current | The PtpClockIdentity type identifies a PTP clock. The PtpClockIdentity shall be in the IEEE EUI-64 format. For example: '008063FFFF000000' |
| PtpClockQuality | OCTET STRING (SIZE (4)) | current | The PtpClockQuality represents the quality of a clock. The first octet represents the clock class. The second octet represents the clockAccuracy and the last two octets represent the offsetScaledLogVariance For example: |
| PtpPortIdentity | OCTET STRING (SIZE (10)) | current | The PtpPortIdentity type identifies a PTP port. The first 8 octets within this value specifies the ClockIdentity. The last 2 octets within this value specifies the port number. For example: '00 80 63 FF FF 00 00 00 00 0… |
| PtpTimeInterval | OCTET STRING (SIZE (8)) | current | The scaledNanoseconds member is the time interval expressed in units of nanoseconds and multiplied by 2^+16. Positive or negative time intervals outside the maximum range of this data type shall be encoded as the larges… |
| PtpTimeStamp | OCTET STRING (SIZE (10)) | current | first 48 bit: seconds since 1.1.1970 last 32 bit: nanoseconds |