HM2-TRACKING-MIB
63 objects
The Hirschmann Private Tracking MIB definitions for Platform devices.
Imported Objects
| HM2-TC-MIB | hm2ConfigurationMibs HmEnabledStatus HmTimeSeconds1970 |
| IF-MIB | ifEntry InterfaceIndexOrZero |
| INET-ADDRESS-MIB | InetAddress InetAddressType |
| IP-FORWARD-MIB | inetCidrRouteEntry |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE |
| SNMPv2-TC | RowStatus |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.248.11.115 | Identityhm2TrackingMib | The Hirschmann Private Tracking MIB definitions for Platform devices. | ||
| 1.3.6.1.4.1.248.11.115.0 | Nodehm2TrackingMibNotifications | |||
| 1.3.6.1.4.1.248.11.115.0.1 | Notificationhm2TrackStatusChangeEvent | current | Sent when the state of a tracking instance changes between up and down. | |
| 1.3.6.1.4.1.248.11.115.1 | Nodehm2TrackingMibObjects | |||
| 1.3.6.1.4.1.248.11.115.1.1 | Nodehm2TrackingConfigGroup | |||
| 1.3.6.1.4.1.248.11.115.1.1.1 | Tablehm2TrackingConfigTable | not-accessible | current | Tracking configuration table. This table provides the interface to setup a specific tracking instance in the tracking database. |
| 1.3.6.1.4.1.248.11.115.1.1.1.1 | Rowhm2TrackingConfigEntry | not-accessible | current | The entry of the hm2TrackingConfigTable. |
| 1.3.6.1.4.1.248.11.115.1.1.1.1.1 | Columnhm2TrackType | accessible-for-notify | current | The kind of an object being tracked. |
| 1.3.6.1.4.1.248.11.115.1.1.1.1.2 | Columnhm2TrackId | accessible-for-notify | current | The id of an object being tracked. |
| 1.3.6.1.4.1.248.11.115.1.1.1.1.3 | Columnhm2TrackName | read-only | current | The name of an object being tracked. |
| 1.3.6.1.4.1.248.11.115.1.1.1.1.4 | Columnhm2TrackDescription | read-create | current | The name of an object being tracked. |
| 1.3.6.1.4.1.248.11.115.1.1.1.1.5 | Columnhm2TrackOperState | read-only | current | Shows if the tracked object is currently up(1), down(2) or notReady(3). in case the state indicates notReady, the corresponding configuration is missing or inv… |
| 1.3.6.1.4.1.248.11.115.1.1.1.1.6 | Columnhm2TrackNumberOfChanges | read-only | current | The number of state changes after an object being tracked, entered its operational state. If the current state was entered prior to the last re-initialization … |
| 1.3.6.1.4.1.248.11.115.1.1.1.1.7 | Columnhm2TrackTimeLastChange | read-only | current | The time of the last state change of an object being tracked, measured in seconds since 00:00:00, January 1, 1970. If the current state was entered prior to th… |
| 1.3.6.1.4.1.248.11.115.1.1.1.1.8 | Columnhm2TrackSendStateChangeTrap | read-create | current | Enables or disables the sending of a trap when hm2TrackStatus changes |
| 1.3.6.1.4.1.248.11.115.1.1.1.1.9 | Columnhm2TrackStatus | read-create | current | Defines the status of the tracking database entry. Set to createAndWait(5) to create a new row. Set to destroy(6) to delete an entry. Reads as active(1) if the… |
| 1.3.6.1.4.1.248.11.115.1.2 | Nodehm2TrackingInterfaceGroup | |||
| 1.3.6.1.4.1.248.11.115.1.2.1 | Tablehm2TrackingInterfaceTable | not-accessible | current | Interface tracking configuration table. This table provides the interface to setup the parameters for an interface tracking object. |
| 1.3.6.1.4.1.248.11.115.1.2.1.1 | Rowhm2TrackingInterfaceEntry | not-accessible | current | The entry of the hm2TrackingInterfaceTable. |
| 1.3.6.1.4.1.248.11.115.1.2.1.1.1 | Columnhm2TrackInterfaceId | not-accessible | current | The identifier of the interface object being tracked. |
| 1.3.6.1.4.1.248.11.115.1.2.1.1.2 | Columnhm2TrackIfNumber | read-write | current | The number of the interface being tracked. |
| 1.3.6.1.4.1.248.11.115.1.2.1.1.3 | Columnhm2TrackIfLinkUpDelay | read-write | current | If a link-up recovers within this delay, the tracked object is not considered as up. |
| 1.3.6.1.4.1.248.11.115.1.2.1.1.4 | Columnhm2TrackIfLinkDownDelay | read-write | current | If a link-down recovers within this delay, the tracked object is not considered as down. |
| 1.3.6.1.4.1.248.11.115.1.3 | Nodehm2TrackingPingGroup | |||
| 1.3.6.1.4.1.248.11.115.1.3.1 | Tablehm2TrackingPingTable | not-accessible | current | Ping tracking configuration table. This table provides the interface to setup the parameters for a ping tracking object. |
| 1.3.6.1.4.1.248.11.115.1.3.1.1 | Rowhm2TrackingPingEntry | not-accessible | current | The entry of the hm2TrackingPingTable. |
| 1.3.6.1.4.1.248.11.115.1.3.1.1.1 | Columnhm2TrackPingId | not-accessible | current | The identifier of the ping object being tracked. |
| 1.3.6.1.4.1.248.11.115.1.3.1.1.2 | Columnhm2TrackPingIfNumber | read-write | current | The number of the source interface, the ping packets are sent. A value of Zero (0) indicates that no interface is configured. |
| 1.3.6.1.4.1.248.11.115.1.3.1.1.3 | Columnhm2TrackPingInetAddrType | read-write | current | The address type of the router being monitored. |
| 1.3.6.1.4.1.248.11.115.1.3.1.1.4 | Columnhm2TrackPingInetAddr | read-write | current | The address of the router being monitored. |
| 1.3.6.1.4.1.248.11.115.1.3.1.1.5 | Columnhm2TrackPingInterval | read-write | current | The number of milliseconds between the pings to the target router address. |
| 1.3.6.1.4.1.248.11.115.1.3.1.1.6 | Columnhm2TrackPingMiss | read-write | current | This specifies the number of consecutive ping misses until the tracked object is considered to be down. |
| 1.3.6.1.4.1.248.11.115.1.3.1.1.7 | Columnhm2TrackPingSuccess | read-write | current | This specifies the number of consecutive ping successes until the tracked object is considered to be up. |
| 1.3.6.1.4.1.248.11.115.1.3.1.1.8 | Columnhm2TrackPingTimeout | read-write | current | This specifies the timeout in milliseconds for a ping reply. After the timeout the ping reply is considered as lost. |
| 1.3.6.1.4.1.248.11.115.1.3.1.1.9 | Columnhm2TrackPingTTL | read-write | current | This specifies the time to live for a ping request packet. |
| 1.3.6.1.4.1.248.11.115.1.3.1.1.10 | Columnhm2TrackPingBestRouteIfNumber | read-only | current | This shows the number of the interface which belongs to the best route. The interface number is zero if the best route is not used to send ping packets. |
| 1.3.6.1.4.1.248.11.115.1.4 | Nodehm2TrackingLogicalGroup | |||
| 1.3.6.1.4.1.248.11.115.1.4.1 | Tablehm2TrackLogicalInstanceTable | not-accessible | current | This table contains the configuration of the tracking instances that are combined into logical tracking instances. |
| 1.3.6.1.4.1.248.11.115.1.4.1.1 | Rowhm2TrackLogicalInstanceEntry | not-accessible | current | The entry of the hm2TrackLogicalInstanceTable. |
| 1.3.6.1.4.1.248.11.115.1.4.1.1.1 | Columnhm2TrackLogicalId | not-accessible | current | The identifier of the logical object being tracked. |
| 1.3.6.1.4.1.248.11.115.1.4.1.1.2 | Columnhm2TrackLogicalOperandNameA | read-write | current | The name of the tracking object to be used as operand A in the logical operation: A operator B. |
| 1.3.6.1.4.1.248.11.115.1.4.1.1.3 | Columnhm2TrackLogicalOperandNameB | read-write | current | The name of the tracking object to be used as operand B in the logical operation: A operator B. |
| 1.3.6.1.4.1.248.11.115.1.4.1.1.4 | Columnhm2TrackLogicalOperator | read-write | current | Defines the logical operation performed on the configured operands A and B. |
| 1.3.6.1.4.1.248.11.115.1.5 | Nodehm2TrackingApplicationGroup | |||
| 1.3.6.1.4.1.248.11.115.1.5.1 | Tablehm2TrackingApplicationTable | not-accessible | current | This table contains information about registered applications, for each object being tracked. |
| 1.3.6.1.4.1.248.11.115.1.5.1.1 | Rowhm2TrackingApplicationEntry | not-accessible | current | The entry of the hm2TrackingApplicationTable. |
| 1.3.6.1.4.1.248.11.115.1.5.1.1.1 | Columnhm2TrackAppId | not-accessible | current | The id of an application which tracks an object. |
| 1.3.6.1.4.1.248.11.115.1.5.1.1.4 | Columnhm2TrackAppName | read-only | current | The name of the registered application. |
| 1.3.6.1.4.1.248.11.115.1.5.1.1.5 | Columnhm2TrackAppObjectName | read-only | current | The name of the tracking object the application registered for. |
| 1.3.6.1.4.1.248.11.115.1.6 | Nodehm2TrackingStaticRouteGroup | |||
| 1.3.6.1.4.1.248.11.115.1.6.1 | Tablehm2TrackStaticRouteTable | not-accessible | current | . |
| 1.3.6.1.4.1.248.11.115.1.6.1.1 | Rowhm2TrackStaticRouteEntry | not-accessible | current | . |
| 1.3.6.1.4.1.248.11.115.1.6.1.1.1 | Columnhm2TrackStaticRouteTrackId | read-create | current | Associate and dissociate the tracking instance to a static route. To dissociate, pass an empty string. |
| 1.3.6.1.4.1.248.11.115.1.6.1.1.2 | Columnhm2TrackStaticRouteTrackState | read-only | current | Shows if the tracked object is currently up(1), down(2) or notReady(3). in case the state indicates notReady, the corresponding configuration is missing or inv… |
| 1.3.6.1.4.1.248.11.115.1.7 | Nodehm2TrackingSNMPExtensionGroup | |||
| 1.3.6.1.4.1.248.11.115.1.7.1 | Identityhm2TrackingInvalidTrackID | current | Indicates that the entry for track id is invalid. | |
| 1.3.6.1.4.1.248.11.115.1.7.2 | Identityhm2TrackingTrackNameRegistrationErrorReturn | current | Indicates that the track name registeration is unsuccessful. | |
| 1.3.6.1.4.1.248.11.115.1.7.3 | Identityhm2TrackingTrackNameDeregisterationErrorReturn | current | Indicates that the track name deregisteration is unsuccessful. | |
| 1.3.6.1.4.1.248.11.115.1.8 | Nodehm2TrackingInterfaceStatusGroup | |||
| 1.3.6.1.4.1.248.11.115.1.8.1 | Tablehm2TrackInterfaceStatusTable | not-accessible | current | This table contains information about tracking objects associated to each interface. |
| 1.3.6.1.4.1.248.11.115.1.8.1.1 | Rowhm2TrackInterfaceStatusEntry | not-accessible | current | The entry of the hm2TrackInterfaceStatusTable. |
| 1.3.6.1.4.1.248.11.115.1.8.1.1.1 | Columnhm2TrackInterfaceStatusTrackId | read-write | current | Associate and dissociate the tracking object to an interface. To dissociate, pass an empty string. |
| 1.3.6.1.4.1.248.11.115.1.8.1.1.2 | Columnhm2TrackInterfaceStatusTrackState | read-only | current | Shows if associated tracking object is currently up(1) or down(2). In case the state indicates notReady(3), the corresponding configuration is missing or inval… |