HM2-TRAFFICMGMT-MIB
19 objects
Hirschmann Traffic Management MIB. Copyright (C) 2011. All Rights Reserved.
Imported Objects
| HM2-TC-MIB | hm2ConfigurationMibs HmEnabledStatus |
| IF-MIB | -- RFC 2578 ifIndex |
| SNMPv2-SMI | MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.248.11.31 | Identityhm2TrafficMgmtMib | Hirschmann Traffic Management MIB. Copyright (C) 2011. All Rights Reserved. | ||
| 1.3.6.1.4.1.248.11.31.0 | Nodehm2TrafficMgmtMibNotifications | |||
| 1.3.6.1.4.1.248.11.31.1 | Nodehm2TrafficMgmtMibObjects | |||
| 1.3.6.1.4.1.248.11.31.1.1 | Tablehm2TrafficMgmtIfTable | not-accessible | current | A list of management objects for traffic control per interface. |
| 1.3.6.1.4.1.248.11.31.1.1.1 | Rowhm2TrafficMgmtIfEntry | not-accessible | current | Traffic Mgmt table entry. |
| 1.3.6.1.4.1.248.11.31.1.1.1.1 | Columnhm2TrafficMgmtIfFlowControl | read-write | current | Enables or disables flow control per port |
| 1.3.6.1.4.1.248.11.31.1.1.1.2 | Columnhm2TrafficMgmtIfEgressShapingRate | read-write | current | Maximum bandwidth allowed for this interface as a whole, typically used to shape the outbound transmission rate. The value is either specified in terms of perc… |
| 1.3.6.1.4.1.248.11.31.1.1.1.3 | Columnhm2TrafficMgmtIfEgressShapingRateUnit | read-only | current | The unit of the interface shaping value. Can be either percentage of port speed or kilobits per second (kbps). |
| 1.3.6.1.4.1.248.11.31.1.1.1.4 | Columnhm2TrafficMgmtIfIngressStormCtlThresholdUnit | read-write | current | Configures the units of the threshold value(s) to percentage of port speed or absolute packets per second. |
| 1.3.6.1.4.1.248.11.31.1.1.1.5 | Columnhm2TrafficMgmtIfIngressStormCtlBcastMode | read-write | current | If enabled, broadcast storm recovery will function on this port. When you specify Enable for Broadcast Storm Recovery and the broadcast traffic on this Etherne… |
| 1.3.6.1.4.1.248.11.31.1.1.1.6 | Columnhm2TrafficMgmtIfIngressStormCtlBcastThreshold | read-write | current | Configures the broadcast storm recovery threshold for this port as a percentage of port speed in 1% increments or as an absolute pps rate. This threshold is al… |
| 1.3.6.1.4.1.248.11.31.1.1.1.7 | Columnhm2TrafficMgmtIfIngressStormCtlMcastMode | read-write | current | If enabled, multicast storm recovery will function on this port. When you specify Enable for multicast Storm Recovery and the multicast traffic on this Etherne… |
| 1.3.6.1.4.1.248.11.31.1.1.1.8 | Columnhm2TrafficMgmtIfIngressStormCtlMcastThreshold | read-write | current | Configures the multicast storm recovery threshold for this port as a percentage of port speed in 1% increments or as an absolute pps rate. |
| 1.3.6.1.4.1.248.11.31.1.1.1.9 | Columnhm2TrafficMgmtIfIngressStormCtlUcastMode | read-write | current | If enabled, unknown unicast storm recovery will function on this port. When you specify Enable for unicast Storm Recovery and the unknown unicast traffic on th… |
| 1.3.6.1.4.1.248.11.31.1.1.1.10 | Columnhm2TrafficMgmtIfIngressStormCtlUcastThreshold | read-write | current | Configures the unicast storm recovery threshold for this port as a percentage of port speed in 1% increments or as an absolute pps rate. |
| 1.3.6.1.4.1.248.11.31.1.2 | Scalarhm2TrafficMgmtFlowControl | read-write | current | Enables or disables flow control for the switch unit. |
| 1.3.6.1.4.1.248.11.31.1.3 | Scalarhm2TrafficMgmtIngressStormBucketType | read-only | current | Enables or disables ingress storm admin state. |
| 1.3.6.1.4.1.248.11.31.3 | Nodehm2TrafficMgmtMibExtensionGroup | |||
| 1.3.6.1.4.1.248.11.31.3.1 | Identityhm2TrafficMgmtNoFlowControl | current | Do not change the flowcontrol settings for the Fast/Gigabit Ethernet SFP ports. |