MIB Viewer

HM2-WWAN-MIB

149 objects
This MIB defines the SNMP interface for Hirschmann WWAN implementation.
Imported Objects
HM2-TC-MIBhm2ConfigurationMibs HmActionValue HmEnabledStatus HmLargeDisplayString HmTimeSeconds1970
INET-ADDRESS-MIBInetAddress InetAddressType
SNMP-FRAMEWORK-MIBSnmpAdminString
SNMPv2-SMICounter64 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32
SNMPv2-TCTEXTUAL-CONVENTION
OIDNameAccessStatusDescription
1.3.6.1.4.1.248.11.125Identityhm2WwanMibThis MIB defines the SNMP interface for Hirschmann WWAN implementation.
1.3.6.1.4.1.248.11.125.0Nodehm2WwanMibNotifications
1.3.6.1.4.1.248.11.125.0.1Notificationhm2WwanRoamingActiveTrapcurrentNotification generated whenever Roaming status will become active.
1.3.6.1.4.1.248.11.125.0.2Notificationhm2WwanLtePersistenceSwitchTrapcurrentNotification generated when LTE Persistence function will perform a switch back to LTE.
1.3.6.1.4.1.248.11.125.0.3Notificationhm2WwanCelluarRegistrationFailedTrapcurrentNotification generated whenever a Cellular Network Registration failure occurs.
1.3.6.1.4.1.248.11.125.0.4Notificationhm2WwanDataConnectionSetupTrapcurrentNotification generated whenever a Cellular Data Connection will change its status.
1.3.6.1.4.1.248.11.125.0.5Notificationhm2WwanDataPlanWarningThresholdTrapcurrentNotification generated when the Data Plan Warning Threshold is reached. The trap is resent after each 25% of remaining data is consumed all the way up until th…
1.3.6.1.4.1.248.11.125.0.6Notificationhm2WwanSimCardPin1StatusTrapcurrentNotification generated whenever SIM Card PIN1 access functions are used and their status changes.
1.3.6.1.4.1.248.11.125.0.7Notificationhm2WwanBackupSimFailoverConnectionTrapcurrentNotification generated whenever a data connection on the Primary SIM Card fails and a failover to Backup SIM Card is done.
1.3.6.1.4.1.248.11.125.0.8Notificationhm2WwanBackupSimFailoverRegistrationTrapcurrentNotification generated whenever a cellular network registration the Primary SIM Card fails and a failover to Backup SIM Card is done.
1.3.6.1.4.1.248.11.125.0.9Notificationhm2WwanBackupSimFailoverRoamingTrapcurrentNotification generated whenever a cellular network registration to a Roaming Carrier is detected on the Primary SIM Card and as a result a failover to the Back…
1.3.6.1.4.1.248.11.125.0.10Notificationhm2WwanBackupSimFailoverDataLimitTrapcurrentNotification generated when the current Data Plan Limit is reached and a failover to the Backup SIM Card is done.
1.3.6.1.4.1.248.11.125.0.11Notificationhm2WwanModemResetFailoverRegistrationTrapcurrentNotification generated when cellular network registration fails on the Primary SIM Card and also the fallback to Backup SIM Card registration fails.
1.3.6.1.4.1.248.11.125.1Nodehm2WwanMibObjects
1.3.6.1.4.1.248.11.125.1.1Nodehm2WwanGeneralGroup
1.3.6.1.4.1.248.11.125.1.1.1Scalarhm2WwanAdminStatusread-writecurrentWWAN Global mode operation change.
1.3.6.1.4.1.248.11.125.1.1.2Scalarhm2WwanCellularSelectionread-writecurrentCellular network selection supported combinations. 'auto' value means all supported networks (GSM/UMTS/LTE).
1.3.6.1.4.1.248.11.125.1.1.4Scalarhm2WwanLtePersistenceread-writecurrentWhen an LTE capable device is connected to a non-LTE network it may not handover to an LTE network when one becomes available if data is being continuously tra…
1.3.6.1.4.1.248.11.125.1.1.5Scalarhm2WwanLtePersistenceIntervalread-writecurrentThe number of seconds after which LTE Persistence switch will be attempted. A 0 value means switch without waiting. This time interval is needed to avoid inter…
1.3.6.1.4.1.248.11.125.1.1.6Scalarhm2WwanFailoverTechnologyLevelread-writecurrentDesired cellular technology limit. If the current cellular network technology falls below this level then failover can be triggered. This mib node is meant to …
1.3.6.1.4.1.248.11.125.1.1.7Scalarhm2WwanBackupSimFailoverConnectionread-writecurrentSwitch to Backup SIM card when data connection fails.
1.3.6.1.4.1.248.11.125.1.1.8Scalarhm2WwanBackupSimFailoverRegistrationread-writecurrentSwitch to Backup SIM when registration fails.
1.3.6.1.4.1.248.11.125.1.1.9Scalarhm2WwanBackupSimFailoverRoamingread-writecurrentSwitch to Backup SIM when roaming is detected.
1.3.6.1.4.1.248.11.125.1.1.10Scalarhm2WwanBackupSimFailoverDataLimitread-writecurrentSwitch to Backup SIM card when data limit is reached and switch to Primary SIM when data limit is recovered.
1.3.6.1.4.1.248.11.125.1.1.11Scalarhm2WwanModemResetFailoverRegistrationread-writecurrentAttempt a Modem reset if both Primary and Backup SIM cards report registration failures. Backup SIM card registration failure might not be needed depending if …
1.3.6.1.4.1.248.11.125.1.1.12Scalarhm2WwanBackupSimTechnologyLevelread-writecurrentSwitch to Backup SIM card when current cellular technology drops bellow a limit. Configure limit with hm2WwanFailoverTechnologyLevel.
1.3.6.1.4.1.248.11.125.1.1.13Scalarhm2WwanFailoverCycleread-writecurrentBy default hm2WwanBackupSimFailoverConnection hm2WwanBackupSimFailoverRegistration will not fallback to using the Primary SIM card if failure is encountered on…
1.3.6.1.4.1.248.11.125.1.1.14Scalarhm2WwanSetTrapread-writecurrentA bitmap string serving as a enable/disable method for the trap events defined by the WWAN notifications. All traps are enabled by default.
1.3.6.1.4.1.248.11.125.1.2Nodehm2WwanDataGroup
1.3.6.1.4.1.248.11.125.1.2.1Tablehm2WwanDataConnectionTablenot-accessiblecurrentThis table contains configuration options for each WWAN Data connection per SIM card.
1.3.6.1.4.1.248.11.125.1.2.1.1Rowhm2WwanDataConnectionEntrynot-accessiblecurrentThe entries of the table.
1.3.6.1.4.1.248.11.125.1.2.1.1.1Columnhm2WwanDataConnectionSimIdnot-accessiblecurrentSIM ID for which this connection entry belongs to. Also used as the table's index.
1.3.6.1.4.1.248.11.125.1.2.1.1.2Columnhm2WwanDataConnectionAdminStatusread-writecurrentOperational mode of the connection.
1.3.6.1.4.1.248.11.125.1.2.1.1.3Columnhm2WwanDataConnectionApnread-writecurrentAccess Point Name used to identify the data connection's gateway name in the carriers network. If empty then the default APN configured on the SIM card will be…
1.3.6.1.4.1.248.11.125.1.2.1.1.4Columnhm2WwanDataConnectionApnCurrentread-onlycurrentCurrent Access Point Name used for data connections. If hm2WwanDataConnectionApn is empty then the value shown here represents the automatically detected APN s…
1.3.6.1.4.1.248.11.125.1.2.1.1.5Columnhm2WwanDataConnectionUserread-writecurrentUser name used for authentication when settting up a new data connection. Empty value means its not required.
1.3.6.1.4.1.248.11.125.1.2.1.1.6Columnhm2WwanDataConnectionPasswordread-writecurrentPasword asociated with the user name used for authentication when settting up a new data connection. Not readable by the user.
1.3.6.1.4.1.248.11.125.1.2.1.1.7Columnhm2WwanDataConnectionAuthread-writecurrentThe type of authentication used when setting up a data connection.
1.3.6.1.4.1.248.11.125.1.2.1.1.8Columnhm2WwanDataConnectionPdpTyperead-writecurrentThe IP type of the data connection to set up. It can be IPv4 or IPv6. Currently only IPv4 is supported.
1.3.6.1.4.1.248.11.125.1.2.1.1.9Columnhm2WwanDataConnectionIpAddressTyperead-writecurrenthm2WwanDataConnectionIpAddress value type, either IPv4 or IPv6.
1.3.6.1.4.1.248.11.125.1.2.1.1.10Columnhm2WwanDataConnectionIpAddressread-writecurrentManual IP address to be used for configuring a new data connection. If 0.0.0.0 then a dynamic IP Address will be assigned by the carrier.
1.3.6.1.4.1.248.11.125.1.2.1.1.11Columnhm2WwanDataConnectionDnsPrimaryTyperead-writecurrenthm2WwanDataConnectionDnsPrimary value type, either IPv4 or IPv6.
1.3.6.1.4.1.248.11.125.1.2.1.1.12Columnhm2WwanDataConnectionDnsPrimaryread-writecurrentManual IP address to be used for configuring the primary DNS server address for the data connection. If 0.0.0.0 then a dynamic DNS IP Address will be assigned …
1.3.6.1.4.1.248.11.125.1.2.1.1.13Columnhm2WwanDataConnectionDnsSecondaryTyperead-writecurrenthm2WwanDataConnectionDnsSecondary value type, either IPv4 or IPv6.
1.3.6.1.4.1.248.11.125.1.2.1.1.14Columnhm2WwanDataConnectionDnsSecondaryread-writecurrentManual IP address to be used for configuring the secondary DNS server address for the data connection. If 0.0.0.0 then a dynamic DNS IP Address will be assigne…
1.3.6.1.4.1.248.11.125.1.2.1.1.15Columnhm2WwanDataConnectionIpAddressCurrentTyperead-onlycurrenthm2WwanDataConnectionIpAddressCurrent value type, either IPv4 or IPv6.
1.3.6.1.4.1.248.11.125.1.2.1.1.16Columnhm2WwanDataConnectionIpAddressCurrentread-onlycurrentThe IP Address that the WWAN data interface is currently using.
1.3.6.1.4.1.248.11.125.1.2.1.1.17Columnhm2WwanDataConnectionDnsPrimaryCurrentTyperead-onlycurrenthm2WwanDataConnectionDnsPrimaryCurrent value type, either IPv4 or IPv6.
1.3.6.1.4.1.248.11.125.1.2.1.1.18Columnhm2WwanDataConnectionDnsPrimaryCurrentread-onlycurrentThe Primary DNS Address that the WWAN data interface is currently using.
1.3.6.1.4.1.248.11.125.1.2.1.1.19Columnhm2WwanDataConnectionDnsSecondaryCurrentTyperead-onlycurrenthm2WwanDataConnectionDnsSecondaryCurrent value type, either IPv4 or IPv6.
1.3.6.1.4.1.248.11.125.1.2.1.1.20Columnhm2WwanDataConnectionDnsSecondaryCurrentread-onlycurrentThe Secondary DNS Address that the WWAN data interface is currently using.
1.3.6.1.4.1.248.11.125.1.2.1.1.21Columnhm2WwanDataConnectionMturead-onlycurrentMaximum Transmision Unit used when sending IP packets over the WWAN data interface. The MTU value is reported by the wwan modem.
1.3.6.1.4.1.248.11.125.1.2.1.1.22Columnhm2WwanDataConnectionFailedRetryread-writecurrentHow many times should a failed WWAN data connection attempt to try reconnecting before aborting and using fallback options or logging error. A value of 0 means…
1.3.6.1.4.1.248.11.125.1.2.1.1.23Columnhm2WwanDataConnectionFailedRetryCurrentread-onlycurrentThe current number o data reconnect attempts made. Value 0 means no retries have been made.
1.3.6.1.4.1.248.11.125.1.2.1.1.24Columnhm2WwanDataConnectionStatusread-onlycurrentCurrent status of this WWAN Data connection. If in 'Error' state then a reason for the error will be found under hm2WwanDataConnectionStatusErrorReason.
1.3.6.1.4.1.248.11.125.1.2.1.1.25Columnhm2WwanDataConnectionStatusErrorReasonread-onlycurrentThe reason why this WWAN Data connection is in 'Error' state.
1.3.6.1.4.1.248.11.125.1.2.1.1.26Columnhm2WwanDataConnectionActivatedCountread-onlycurrentHow many times this WWAN Data connection was successfuly established.
1.3.6.1.4.1.248.11.125.1.2.1.1.27Columnhm2WwanDataConnectionStartTimeread-onlycurrentTime in seconds since Jan 1, 1970.
1.3.6.1.4.1.248.11.125.1.2.1.1.28Columnhm2WwanDataConnectionUpTimeread-onlycurrentTime in seconds since this connection is active.
1.3.6.1.4.1.248.11.125.1.2.1.1.29Columnhm2WwanDataConnectionTotalUpTimeread-onlycurrentTotal time in which this connection was active.
1.3.6.1.4.1.248.11.125.1.2.2Tablehm2WwanDataPlanTablenot-accessiblecurrentThis table contains configuration options for each WWAN Data Plan per SIM card.
1.3.6.1.4.1.248.11.125.1.2.2.1Rowhm2WwanDataPlanEntrynot-accessiblecurrentThe entries of the table.
1.3.6.1.4.1.248.11.125.1.2.2.1.1Columnhm2WwanDataPlanSimIdnot-accessiblecurrentSIM ID for which this connection entry belongs. Also used as the table's index.
1.3.6.1.4.1.248.11.125.1.2.2.1.2Columnhm2WwanDataPlanMonthlyLimitread-writecurrentThe amount of data that the carrier will charge as per a WWAN data contract per month. A value 0 means unlimited.
1.3.6.1.4.1.248.11.125.1.2.2.1.3Columnhm2WwanDataPlanLimitMeasureUnitread-writecurrentWhich measure unit is used to interpret the volume of the data traffic. Possible units are: Kilobytes, Megabytes, Gigabytes.
1.3.6.1.4.1.248.11.125.1.2.2.1.4Columnhm2WwanDataPlanWarningThresholdread-writecurrentThe percentage of the volume of data that when reached will generate a warning. A value of 0 will disable the warning.
1.3.6.1.4.1.248.11.125.1.2.2.1.5Columnhm2WwanDataPlanResetread-writecurrentManually reset the data plan counters. Only the value 'action(2)' can be written and when read 'noop(1)' will always be returned.
1.3.6.1.4.1.248.11.125.1.2.2.1.6Columnhm2WwanDataPlanResetDayread-writecurrentWhich day of the month will be used to auto reset the data plan counters. A value of 0 will disable the reset action. The reset action will be performed at 00:…
1.3.6.1.4.1.248.11.125.1.2.2.1.7Columnhm2WwanDataPlanLastResetread-onlycurrentTime in seconds since Jan 1st, 1970 when the last data plan counters were resetted.
1.3.6.1.4.1.248.11.125.1.2.2.1.8Columnhm2WwanDataPlanCutoffThresholdread-writecurrentThe percentage of the volume of used data that when reached will completely disable any data connections associated with this SIM ID. A value of 0 will disable…
1.3.6.1.4.1.248.11.125.1.2.2.1.9Columnhm2WwanDataPlanMonthlyUsageTxread-onlycurrentThe amount of data that was transmitted since last reset. The measure unit is the same as hm2WwanDataPlanLimitMeasureUnit.
1.3.6.1.4.1.248.11.125.1.2.2.1.10Columnhm2WwanDataPlanMonthlyUsageRxread-onlycurrentThe amount of data that was received since last reset. The measure unit is the same as hm2WwanDataPlanLimitMeasureUnit.
1.3.6.1.4.1.248.11.125.1.2.3Tablehm2WwanDataPacketStatsTablenot-accessiblecurrentThis table contains packet statistics for each WWAN Data connection per SIM card.
1.3.6.1.4.1.248.11.125.1.2.3.1Rowhm2WwanDataPacketStatsEntrynot-accessiblecurrentThe entries of the table.
1.3.6.1.4.1.248.11.125.1.2.3.1.1Columnhm2WwanDataPacketStatsSimIdnot-accessiblecurrentSIM ID for which this data connection packet statistics entry belongs to. Also used as the table's index.
1.3.6.1.4.1.248.11.125.1.2.3.1.2Columnhm2WwanDataPacketStatsTxOkread-onlycurrentThe number of successfully transmitted data packets.
1.3.6.1.4.1.248.11.125.1.2.3.1.3Columnhm2WwanDataPacketStatsRxOkread-onlycurrentThe number of successfully received data packets.
1.3.6.1.4.1.248.11.125.1.2.3.1.4Columnhm2WwanDataPacketStatsTxErrorsread-onlycurrentThe number of errors encountered during packet transmission.
1.3.6.1.4.1.248.11.125.1.2.3.1.5Columnhm2WwanDataPacketStatsRxErrorsread-onlycurrentThe number of errors encountered during packet reception.
1.3.6.1.4.1.248.11.125.1.2.3.1.6Columnhm2WwanDataPacketStatsTxOverflowsread-onlycurrentThe number of overflows encountered during packet transmission.
1.3.6.1.4.1.248.11.125.1.2.3.1.7Columnhm2WwanDataPacketStatsRxOverflowsread-onlycurrentThe number of overflows encountered during packet reception.
1.3.6.1.4.1.248.11.125.1.2.3.1.8Columnhm2WwanDataPacketStatsTxBytesOkread-onlycurrentThe number of successfully transmitted bytes.
1.3.6.1.4.1.248.11.125.1.2.3.1.9Columnhm2WwanDataPacketStatsRxBytesOkread-onlycurrentThe number of successfully received bytes.
1.3.6.1.4.1.248.11.125.1.2.3.1.10Columnhm2WwanDataPacketStatsTxDroppedread-onlycurrentThe number of packets dropped during transmission.
1.3.6.1.4.1.248.11.125.1.2.3.1.11Columnhm2WwanDataPacketStatsRxDroppedread-onlycurrentThe number of packets dropped during reception.
1.3.6.1.4.1.248.11.125.1.3Nodehm2WwanSimCardGroup
1.3.6.1.4.1.248.11.125.1.3.1Tablehm2WwanSimCardTablenot-accessiblecurrentThis table contains configuration options for each WWAN SIM card.
1.3.6.1.4.1.248.11.125.1.3.1.1Rowhm2WwanSimCardEntrynot-accessiblecurrentThe entries of the table.
1.3.6.1.4.1.248.11.125.1.3.1.1.1Columnhm2WwanSimCardSimIdnot-accessiblecurrentSIM ID for which this connection entry belongs. Also used as the table's index.
1.3.6.1.4.1.248.11.125.1.3.1.1.2Columnhm2WwanSimCardAdminStatusread-writecurrentSim Card enable/disable function.
1.3.6.1.4.1.248.11.125.1.3.1.1.3Columnhm2WwanSimCardRoleread-writecurrentThe role this Sim Card will be assigned. The role is important for failover scenarios configured under General Configuration Group. 'auto' setting will automat…
1.3.6.1.4.1.248.11.125.1.3.1.1.4Columnhm2WwanSimCardRoleCurrentread-onlycurrentThe role this Sim Card is currently using.
1.3.6.1.4.1.248.11.125.1.3.1.1.5Columnhm2WwanSimCardStatusread-onlycurrentSim Card Status information: * simPresent: the SIM is physicaly present. * simAbsent: the SIM is physicaly absent. * simLocked: the SIM is physicaly present bu…
1.3.6.1.4.1.248.11.125.1.3.1.1.6Columnhm2WwanSimCardSetActiveread-writecurrentManual operation to set the active status of this sim card. When in active state this sim card will be used for establishing data connections.
1.3.6.1.4.1.248.11.125.1.3.1.1.7Columnhm2WwanSimCardPin1read-writecurrentSim Card's PIN1 code. PIN1 is used to unlock main Sim functions which will allow Network Carrier Registration.
1.3.6.1.4.1.248.11.125.1.3.1.1.8Columnhm2WwanSimCardPin1Moderead-writecurrentAllows to enable or disable PIN1 code. With PIN1 disabled the Sim Card will automatically unlock all it's functions.
1.3.6.1.4.1.248.11.125.1.3.1.1.9Columnhm2WwanSimCardPin1Statusread-onlycurrentPin1 status information: * NotVerified: Pin1 was not verified. * Verified: Pin1 was successfuly verified. * Blocked: Wrong Pin1 was used too many times and the…
1.3.6.1.4.1.248.11.125.1.3.1.1.10Columnhm2WwanSimCardPin1VerifyTriesread-onlycurrentThe amount of times a wrong Pin1 code can be used to unlock the Sim Card until it is blocked.
1.3.6.1.4.1.248.11.125.1.3.1.1.11Columnhm2WwanSimCardPin1UnblockTriesread-onlycurrentThe amount of times a wrong PUK1 code can be entered to unblock a PIN1 code.
1.3.6.1.4.1.248.11.125.1.3.1.1.12Columnhm2WwanSimCardPuk1read-writecurrentPUK1 code is used to unblock a PIN1 code. Writing a PUK1 value will attempt to unblock a PIN1 code if the PIN1 code is in 'Blocked' state. PUK1 code will not b…
1.3.6.1.4.1.248.11.125.1.3.1.1.13Columnhm2WwanSimCardRoamingModeread-writecurrentRoaming will allow the modem to perform registration with carriers other than the one that emitted the current SIM card. Data connections established when atta…
1.3.6.1.4.1.248.11.125.1.3.1.1.14Columnhm2WwanSimCardIccidread-writecurrentIntegrated Circuit Card Identifier is the international SIM's identifier. This value is preserved over reboots so that when a new SIM is inserted the operation…
1.3.6.1.4.1.248.11.125.1.3.1.1.15Columnhm2WwanSimCardImsiread-onlycurrentInternational Mobile Subscriber Identity is an individual identifier on operator networks. Mobile network operators connect mobile phone calls and communicate …
1.3.6.1.4.1.248.11.125.1.4Nodehm2WwanInformationGroup
1.3.6.1.4.1.248.11.125.1.4.1Nodehm2WwanCellularInformationGroup
1.3.6.1.4.1.248.11.125.1.4.1.1Scalarhm2WwanCellularActiveSimIdread-onlycurrentThe Sim Card id for the current active SIM: * '0' value means no SIM Card is active. * '1' value means Primary SIM Card is active. * '2' value means Backup SIM…
1.3.6.1.4.1.248.11.125.1.4.1.2Scalarhm2WwanCellularRegistrationread-onlycurrentThe current status of the Sim's Carrier Registration.
1.3.6.1.4.1.248.11.125.1.4.1.3Scalarhm2WwanCellularOperatorread-onlycurrentNetwork Operator Name
1.3.6.1.4.1.248.11.125.1.4.1.4Scalarhm2WwanCellularNetworkread-onlycurrentCurrent Cellular Network Technology being used.
1.3.6.1.4.1.248.11.125.1.4.1.5Scalarhm2WwanCellularMccread-onlycurrentMobile Country Code is a 3 digits code used to identify the country where the Public Land Mobile Network (PLMN) resides.
1.3.6.1.4.1.248.11.125.1.4.1.6Scalarhm2WwanCellularMncread-onlycurrentMobile Network Code is a 2 to 3 digits code used to identify the Public Land Mobile Network (PLMN) in that country.
1.3.6.1.4.1.248.11.125.1.4.1.7Scalarhm2WwanCellularLacread-onlycurrentLocation area code together with PLMN (MCC + MNC) creates an internationally unique identifier known as Location Area Identity (LAI). The LAI is used for locat…
1.3.6.1.4.1.248.11.125.1.4.1.8Scalarhm2WwanCellularBsicread-onlycurrentBase Station Identity Code is a code used in WWAN networks to uniquely identify a base station.
1.3.6.1.4.1.248.11.125.1.4.1.9Scalarhm2WwanCellularCellIdread-onlycurrentThe identifier of the current used WWAN Cell.
1.3.6.1.4.1.248.11.125.1.4.1.10Scalarhm2WwanCellularBandread-onlycurrentThe current Cellular Band used for radio transmissions.
1.3.6.1.4.1.248.11.125.1.4.1.11Scalarhm2WwanCellularChannelread-onlycurrentThe current channel number within the Cellular Band used for radio transmissions. A value of 0 means the channel is not relevant to the network technology curr…
1.3.6.1.4.1.248.11.125.1.4.1.12Scalarhm2WwanCellularSignalStrengthread-onlycurrentIn GSM/UMTS mobile networks signal strength is based on RSSI (Received Signal Strength Indication) value measuring the power level being received by the antena…
1.3.6.1.4.1.248.11.125.1.4.1.13Scalarhm2WwanCellularSignalStrengthLteread-onlycurrentIn LTE mobile networks signal strength is based on RSRP (Reference Signal Received Power) value.
1.3.6.1.4.1.248.11.125.1.4.1.14Scalarhm2WwanCellularSignalQualityread-onlycurrentUMTS signal quality indicator based on ECIO (Energy to Interference Ratio).
1.3.6.1.4.1.248.11.125.1.4.1.15Scalarhm2WwanCellularSignalQualityLteread-onlycurrentLTE signal quality indicator based on RSRQ (Reference Signal Received Quality).
1.3.6.1.4.1.248.11.125.1.4.1.16Scalarhm2WwanCellularRoamingStatusread-onlycurrentCurrent Roaming status: * Home: registration done in home network. * Roaming: registration done in partner network in roaming mode. Roaming has to be admin ena…
1.3.6.1.4.1.248.11.125.1.4.1.17Scalarhm2WwanCellularBitErrorRateread-onlycurrentCellular transmission error rate displayed in hundredths of percentage units. A value of 1000 means 10% bit error ratio.
1.3.6.1.4.1.248.11.125.1.4.1.18Scalarhm2WwanCellularCurrentTxRateread-onlycurrentCurrent channel TX rate displayed in kbps.
1.3.6.1.4.1.248.11.125.1.4.1.19Scalarhm2WwanCellularCurrentRxRateread-onlycurrentCurrent channel RX rate displayed in kbps.
1.3.6.1.4.1.248.11.125.1.4.1.20Scalarhm2WwanCellularMaxTxRateread-onlycurrentMaximum channel TX rate that can be achieved, displayed in kbps.
1.3.6.1.4.1.248.11.125.1.4.1.21Scalarhm2WwanCellularMaxRxRateread-onlycurrentMaximum channel RX rate that can be achieved, displayed in kbps.
1.3.6.1.4.1.248.11.125.1.4.1.22Scalarhm2WwanCellularDataTechread-onlycurrentData technology in use for the active data connection.
1.3.6.1.4.1.248.11.125.1.4.2Nodehm2WwanModemInformationGroup
1.3.6.1.4.1.248.11.125.1.4.2.1Scalarhm2WwanModemManufacturerread-onlycurrentRadio Modem Manufacturer
1.3.6.1.4.1.248.11.125.1.4.2.2Scalarhm2WwanModemModelread-onlycurrentThe model of the Radio Modem.
1.3.6.1.4.1.248.11.125.1.4.2.3Scalarhm2WwanModemRevisionread-onlycurrentModem Software version and revision.
1.3.6.1.4.1.248.11.125.1.4.2.4Scalarhm2WwanModemImeiread-onlycurrentInternation Mobile Equipment Identity is a unique number given to mobile capable devices.
1.3.6.1.4.1.248.11.125.1.4.2.5Scalarhm2WwanModemOperationalStateread-onlycurrentONLINE: Modem is fully operational LOW_POWER: Modem has temporarily disabled RF OFFLINE: Modem has deactivated RF and is partially shutdown RESET: Modem is in …
Type Definitions
NameSyntaxStatusDescription
Hm2AuthTypeINTEGER { none (1), pap (2), chap (3), papchap (4) }currentWWAN Data Authentication list.
Hm2CellularDataTechINTEGER { unknown(0), gsm(1), umts(2), edge(3), hsdpa(4), hsupa(5), hsdpa-hsupda(6), lte(7), hsdpaplus(8), hsdpaplus-hsupa(9), dchsdpaplus(10), dchsdpaplus-hsupa(11) }currentData technology list.
Hm2CellularNetworksINTEGER { auto (1), gsm (2), umts (3), lte (4), gsmumts (5), gsmlte (6), umtslte (7), none (8) }currentCellular Networks list.
Hm2ConnectionStatusINTEGER { inactive (1), active (2), idle (3), connecting (4), reconnecting (5), failure (6) }currentWWAN Data Connection Status list.
Hm2LimitUnitINTEGER { kb (1), mb (2), gb (3) }currentWWAN Data Plan measuring unit.
Hm2ModemOperationalStateINTEGER { online(0), low-power(1), offline(2), reset(3), shutting-down(4), persistent-low-power(5), unknown(255) }currentModem power states.
Hm2PdpTypeINTEGER { ipv4 (1), ipv6 (2), ipv4v6 (3) }currentWWAN Data IP Addressing types.
Hm2Pin1StatusINTEGER { notVerified (1), verified (2), blocked (3), disabled (4), wrongCode(5) }currentWWAN Sim Card Pin1 Status.
Hm2RegistrationStatusINTEGER { notRegistered (1), registering (2), registered (3), failure (4) }currentWWAN Sim Card Registration Status.
Hm2RoamingStatusINTEGER { home (1), roaming (2), roamingDisabled (3) }currentWWAN Carrier Roaming Status.
Hm2SimCardRoleINTEGER { auto (1), primary (2), backup (3) }currentWWAN Sim Card Role.
Hm2SimCardsListActiveINTEGER { noSim (0), sim1 (1), sim2 (2), sim3 (3), sim4 (4) }currentSIM Cards list.
Hm2SimCardsListIndexINTEGER { sim1 (0), sim2 (1), sim3 (2), sim4 (3) }currentSIM Cards list.
Hm2SimCardStatusINTEGER { simPresent (1), simAbsent (2), simLocked (3), simUnlocked (4), simInactive (5), simActive (6) }currentWWAN Sim Card Status.
Hm2TechnologyLevelINTEGER { lte (1), utms (2) }currentCellular Networks Technology levels.
Hm2TrapBitsBITS { roamingActive(0), ltePersistenceSwitch(1), cellularRegistrationFailed(2), dataConnectionSetup(3), dataPlanWarningThreshold(4), simPin1Status(5), failoverConnectionBackupSim(6), failoverRegistrationBackupSim(7), failoverRoamingBackupSim(8), failoverDataLimitBackupSim(9), failoverRegistrationModemReset(10) }currentTraps enable/disable bit list.
MIB Viewer