HME621
80 objects
hme621 private MIB file rev 1.02
Imported Objects
| RFC1155-SMI | internet |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4 | Nodeprivate | |||
| 1.3.6.1.4.1 | Nodeenterprises | |||
| 1.3.6.1.4.1.60000 | NodeethernetDirect | |||
| 1.3.6.1.4.1.60000.301 | Nodegeneric | |||
| 1.3.6.1.4.1.60000.301.1 | Nodel2switch | |||
| 1.3.6.1.4.1.60000.301.1.43 | NodeHME-621 | |||
| 1.3.6.1.4.1.60000.301.1.43.0 | Identitycontact | hme621 private MIB file rev 1.02 | ||
| 1.3.6.1.4.1.60000.301.1.43.1 | NodeswitchInfo | |||
| 1.3.6.1.4.1.60000.301.1.43.1.1 | ScalarswFirmwareVer | read-only | current | Firmware version. |
| 1.3.6.1.4.1.60000.301.1.43.1.2 | ScalarswKernelVer | read-only | current | System kernel version. |
| 1.3.6.1.4.1.60000.301.1.43.1.3 | ScalarswHardwareVer | read-only | current | Hardware version. |
| 1.3.6.1.4.1.60000.301.1.43.1.4 | ScalarswMacAddress | read-only | current | The unique MAC address. |
| 1.3.6.1.4.1.60000.301.1.43.1.5 | ScalarswPowerStatus | read-only | current | Indicate the switch power status. power1OnPower2On(1), power1OnPower2Off(2), power1OffPower2On(3), power1OffPower2Off(4) |
| 1.3.6.1.4.1.60000.301.1.43.2 | NodeswitchPortMgt | |||
| 1.3.6.1.4.1.60000.301.1.43.2.1 | TableswitchPortMgtTable | not-accessible | current | Table of descriptive and status information about configuration of each switch ports(including expansion slot) in this system. |
| 1.3.6.1.4.1.60000.301.1.43.2.1.1 | RowswitchPortMgtEntry | not-accessible | current | An entry in the table, containing information about configuration in one switch port of the switch. |
| 1.3.6.1.4.1.60000.301.1.43.2.1.1.1 | ColumnswPortMgtIndex | not-accessible | current | This object identifies the port within the switch for which this entry contains information. |
| 1.3.6.1.4.1.60000.301.1.43.2.1.1.2 | ColumnswPortMgtPortType | read-only | current | Indicate the port type. |
| 1.3.6.1.4.1.60000.301.1.43.2.1.1.3 | ColumnswPortMgtSpeedDpxAdmin | read-write | current | Set the port speed and duplex mode as follows: halfDuplex10(1) - 10Mbps and half duplex mode fullDuplex10(2) - 10Mbps and full duplex mode halfDuplex100(3) - 1… |
| 1.3.6.1.4.1.60000.301.1.43.2.1.1.4 | ColumnswPortMgtSpeedDpxInUse | read-only | current | The operating speed and duplex mode of the switched port. |
| 1.3.6.1.4.1.60000.301.1.43.2.1.1.5 | ColumnswPortMgtFlowCtrlAdmin | read-write | current | |
| 1.3.6.1.4.1.60000.301.1.43.2.1.1.6 | ColumnswPortMgtFlowCtrlInUse | read-only | current | |
| 1.3.6.1.4.1.60000.301.1.43.3 | NodesystemSTAMgt | |||
| 1.3.6.1.4.1.60000.301.1.43.3.1 | ScalarsystemSTAStatus | read-write | current | Global spanning tree status. (1) Spanning tree protocol is enabled. (2) Spanning tree protocol is disabled. |
| 1.3.6.1.4.1.60000.301.1.43.4 | NodetftpDownloadMgt | |||
| 1.3.6.1.4.1.60000.301.1.43.4.1 | ScalartftpDownloadServerIP | read-write | current | The IP address of a TFTP server from which a firmware image can be downloaded. |
| 1.3.6.1.4.1.60000.301.1.43.4.2 | ScalartftpDownloadAgentBoardFwFileName | read-write | current | |
| 1.3.6.1.4.1.60000.301.1.43.4.3 | ScalartftpDownloadAgentBoardFwDownloadFunction | read-write | current | BackupConfiguration(1):Back up switch configuration to tftp server and saving as a file. RestoreConfiguration(2):Restore configuration file from tftp server to… |
| 1.3.6.1.4.1.60000.301.1.43.4.4 | ScalartftpDownloadStatus | read-write | current | Setting this object to active(1) triger the TFTP download action. Setting this object to notActive(2) has no effect. The system always returns the value notAct… |
| 1.3.6.1.4.1.60000.301.1.43.5 | NoderestartMgt | |||
| 1.3.6.1.4.1.60000.301.1.43.5.1 | ScalarrestartOptionPOST | read-write | current | Setting this object as enabled. The system will do POST when it restart |
| 1.3.6.1.4.1.60000.301.1.43.5.2 | ScalarrestartOptionReloadFactoryDefault | read-write | current | Setting this object as enabled. The system will do factory reset when it restart |
| 1.3.6.1.4.1.60000.301.1.43.5.3 | ScalarrestartOptionKeepIpSetting | read-write | current | Setting this object as enabled. The system will keep IP setting when it do factory reset. |
| 1.3.6.1.4.1.60000.301.1.43.5.4 | ScalarrestartOptionKeepUserAuthentication | read-write | current | Setting this object as enabled. The system will keep user authentication setting when it do factory reset. |
| 1.3.6.1.4.1.60000.301.1.43.5.5 | ScalarrestartAction | read-write | current | Setting this object to active(1) triger the system restart. Setting this object to notActive(2) has no effect. The system always returns the value notActive(2)… |
| 1.3.6.1.4.1.60000.301.1.43.6 | NodeportMirrorMgt | |||
| 1.3.6.1.4.1.60000.301.1.43.6.1 | ScalarportMirrorStatus | read-write | current | Port mirroring function status. (1) mirroring function is enabled. (2) mirroring function is disabled. |
| 1.3.6.1.4.1.60000.301.1.43.6.2 | ScalarportMirrorSnifferPort | read-write | current | Port Id(1~8) of sniffer port to which all frames to/from mirrored ports are sent. Frames are only mirrored if the portMirrorStatus object is set to enabled(1). |
| 1.3.6.1.4.1.60000.301.1.43.6.3 | ScalarportMirrorMirroredPort | read-write | current | The set of ports which are mirrored. The traffic of mirrored port will be 'copied' to sniffer port. |
| 1.3.6.1.4.1.60000.301.1.43.6.4 | ScalarportMirrorMode | read-write | current | Port mirroring function mode. (1) mirroring rx and tx frame. (2) mirroring tx frame. |
| 1.3.6.1.4.1.60000.301.1.43.7 | NodeigmpMgt | |||
| 1.3.6.1.4.1.60000.301.1.43.7.1 | ScalarigmpStatus | read-write | current | Parameter to enable or disable IGMP snooping on the device. When enabled, the device will examine IGMP packets and set up filters for IGMP ports. The Internet … |
| 1.3.6.1.4.1.60000.301.1.43.7.2 | ScalarigmpQuery | read-write | current | (1)Detect querier automatically. (2)Force to be a querier. (3)Be a silence snooper. The mode of querier. |
| 1.3.6.1.4.1.60000.301.1.43.7.3 | TableigmpEntriesTable | not-accessible | current | Table of descriptive information about IGMP entries. |
| 1.3.6.1.4.1.60000.301.1.43.7.3.1 | RowigmpEntriesEntry | not-accessible | current | An entry in the table, containing inforamtion about IGMP. |
| 1.3.6.1.4.1.60000.301.1.43.7.3.1.1 | ColumnigmpEntriesEntryIndex | read-only | current | Index of IGMP table. |
| 1.3.6.1.4.1.60000.301.1.43.7.3.1.2 | ColumnigmpEntriesEntryIPAddr | read-only | current | The IP address of an IGMP entry. |
| 1.3.6.1.4.1.60000.301.1.43.7.3.1.3 | ColumnigmpEntriesEntryVID | read-only | current | The VLAN ID of an IGMP entry. |
| 1.3.6.1.4.1.60000.301.1.43.7.3.1.4 | ColumnigmpEntriesEntryMembers | read-only | current | The member ports mask of IGMP entry. |
| 1.3.6.1.4.1.60000.301.1.43.8 | NodeX-RingMgt | |||
| 1.3.6.1.4.1.60000.301.1.43.8.1 | ScalarX-RingStatus | read-write | current | X- Ring funtion status. (1) X- Ring function is enabled. (2) X- Ring function is disabled. |
| 1.3.6.1.4.1.60000.301.1.43.8.2 | ScalarX-RingRingPort1 | read-write | current | Port Id(1~8) will be working port. The system will automatically decide which port is working port and which port is backup port if the X-RingStatus object is … |
| 1.3.6.1.4.1.60000.301.1.43.8.3 | ScalarX-RingRingPort2 | read-write | current | Port Id(1~8) will be working port. The system will automatically decide which port is working port and which port is backup port if the X-RingStatus object is … |
| 1.3.6.1.4.1.60000.301.1.43.8.4 | ScalarX-RingCoupleRingStatus | read-write | current | Couple Ring function status. (1) Couple Ring function is enabled. (2) Couple Ring function is disabled. This item can't be modified if X-RingStatus object is s… |
| 1.3.6.1.4.1.60000.301.1.43.8.5 | ScalarX-RingCouplingPort | read-write | current | Coupling Port. |
| 1.3.6.1.4.1.60000.301.1.43.8.6 | ScalarX-RingControlPort | read-write | current | Control Port. |
| 1.3.6.1.4.1.60000.301.1.43.8.7 | ScalarX-RingDualHomingStatus | read-write | current | Couple Ring function status. (1) Dual Homing function is enabled. (2) Dual Homing function is disabled. This item can't be modified if X-RingStatus object is s… |
| 1.3.6.1.4.1.60000.301.1.43.8.8 | ScalarX-RingHomingPort | read-write | current | Homing Port. |
| 1.3.6.1.4.1.60000.301.1.43.9 | NodeipSecurityMgt | |||
| 1.3.6.1.4.1.60000.301.1.43.9.1 | ScalaripSecurityStatus | read-write | current | IP Security funtion status. (1) IP Security function is enabled. (2) IP Security function is disabled. |
| 1.3.6.1.4.1.60000.301.1.43.9.2 | ScalaripSecuritySecurityIP1 | read-write | current | This IP address can access and manage the switch through the Web browser. |
| 1.3.6.1.4.1.60000.301.1.43.9.3 | ScalaripSecuritySecurityIP2 | read-write | current | This IP address can access and manage the switch through the Web browser. |
| 1.3.6.1.4.1.60000.301.1.43.9.4 | ScalaripSecuritySecurityIP3 | read-write | current | This IP address can access and manage the switch through the Web browser. |
| 1.3.6.1.4.1.60000.301.1.43.9.5 | ScalaripSecuritySecurityIP4 | read-write | current | This IP address can access and manage the switch through the Web browser. |
| 1.3.6.1.4.1.60000.301.1.43.9.6 | ScalaripSecuritySecurityIP5 | read-write | current | This IP address can access and manage the switch through the Web browser. |
| 1.3.6.1.4.1.60000.301.1.43.9.7 | ScalaripSecuritySecurityIP6 | read-write | current | This IP address can access and manage the switch through the Web browser. |
| 1.3.6.1.4.1.60000.301.1.43.9.8 | ScalaripSecuritySecurityIP7 | read-write | current | This IP address can access and manage the switch through the Web browser. |
| 1.3.6.1.4.1.60000.301.1.43.9.9 | ScalaripSecuritySecurityIP8 | read-write | current | This IP address can access and manage the switch through the Web browser. |
| 1.3.6.1.4.1.60000.301.1.43.9.10 | ScalaripSecuritySecurityIP9 | read-write | current | This IP address can access and manage the switch through the Web browser. |
| 1.3.6.1.4.1.60000.301.1.43.9.11 | ScalaripSecuritySecurityIP10 | read-write | current | This IP address can access and manage the switch through the Web browser. |
| 1.3.6.1.4.1.60000.301.1.43.10 | NodespecificTrap | |||
| 1.3.6.1.4.1.60000.301.1.43.10.1 | ScalartrapPowerStatus | read-only | current | Indicate the power status power1On_power2On(1), power1On_power2Off(2), power1Off_power2On(3), power1Off_power2Off(4) |
| 1.3.6.1.4.1.60000.301.1.43.10.2 | ScalartrapLinkDownAlarm | read-only | current | Indicate port link down event alarm status |
| 1.3.6.1.4.1.60000.301.1.43.10.3 | ScalartrapFaultRelay | read-only | current | Indicate fault relay status |
| 1.3.6.1.4.1.60000.301.1.43.10.4 | ScalartrapTopologyChange | read-only | current | Indicate the number of topology change event occurred |
| 1.3.6.1.4.1.60000.301.1.43.11 | NodepowerAlarmMgt | |||
| 1.3.6.1.4.1.60000.301.1.43.11.1 | Scalarpower1Alarm | read-write | current | Configure power 1 alarm enabled/disable |
| 1.3.6.1.4.1.60000.301.1.43.11.2 | Scalarpower2Alarm | read-write | current | Configure power 2 alarm enabled/disable |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| DisplayString | OCTET STRING (SIZE (0..255)) | current | |
| PortList | OCTET STRING | current | Each octet within this value specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents… |