HMIT-SW-PORT-MGR-MIB
25 objects
Port Module
Imported Objects
| HMIT-SMI | hmITSwitchTech |
| SNMPv2-SMI | Counter64 Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString MacAddress PhysAddress RowStatus |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.248.100.1.6.3.1 | IdentityhmITSwPortMIB | Port Module | ||
| 1.3.6.1.4.1.248.100.1.6.3.1.13 | NodehmITSwPortmgrMIB | |||
| 1.3.6.1.4.1.248.100.1.6.3.1.13.2 | TablehmITPortmgrTable | not-accessible | current | The configuration table of the ports on the switch. |
| 1.3.6.1.4.1.248.100.1.6.3.1.13.2.1 | RowhmITPortmgrEntry | not-accessible | current | The configuration information of the port on the switch. |
| 1.3.6.1.4.1.248.100.1.6.3.1.13.2.1.1 | ColumnhmITPortId | not-accessible | current | The index of the port. |
| 1.3.6.1.4.1.248.100.1.6.3.1.13.2.1.2 | ColumnhmITMgrLinkStatus | read-write | current | The managed link status of the port, 1 - no shutdwon(Enable), 2 - shutdown(Disable). |
| 1.3.6.1.4.1.248.100.1.6.3.1.13.2.1.3 | ColumnhmITDescription | read-write | current | The description of the port. |
| 1.3.6.1.4.1.248.100.1.6.3.1.13.2.1.4 | ColumnhmITMgrDuplex | read-write | current | The managed duplex mode of the port, 1 - auto, 2 - half, 3 - full |
| 1.3.6.1.4.1.248.100.1.6.3.1.13.2.1.5 | ColumnhmITMgrSpeed | read-write | current | The managed speed of the port. |
| 1.3.6.1.4.1.248.100.1.6.3.1.13.2.1.6 | ColumnhmITFlowControl | read-write | current | The flow control of the port. |
| 1.3.6.1.4.1.248.100.1.6.3.1.13.2.1.7 | ColumnhmITMdix | read-write | current | The mdix mode of the port. |
| 1.3.6.1.4.1.248.100.1.6.3.1.13.2.1.8 | ColumnhmITMtu | read-write | current | The MTU length of the port, its range from 64 to 12288. |
| 1.3.6.1.4.1.248.100.1.6.3.1.13.2.1.9 | ColumnhmITLinkDelay | read-write | current | The delay time of the actual link status of the port from be down to be reported, measured by the second. When value is 0, it means to be reported immediately.… |
| 1.3.6.1.4.1.248.100.1.6.3.1.13.2.1.10 | ColumnhmITLoopBack | read-write | current | Loopback test on the port, don't save its configuration. |
| 1.3.6.1.4.1.248.100.1.6.3.1.13.2.1.11 | ColumnhmITActualLinkStatus | read-only | current | The actual link status of the port. |
| 1.3.6.1.4.1.248.100.1.6.3.1.13.2.1.12 | ColumnhmITActualDuplex | read-only | current | The actual duplex mode of the port. |
| 1.3.6.1.4.1.248.100.1.6.3.1.13.2.1.13 | ColumnhmITActualSpeed | read-only | current | The actual speed of the port, measured by Mbps |
| 1.3.6.1.4.1.248.100.1.6.3.1.13.2.1.14 | ColumnhmITPhyType | read-only | current | The physical type of the port, 1 - copper, 2 - fiber |
| 1.3.6.1.4.1.248.100.1.6.3.1.13.2.1.15 | ColumnhmITPhyMacAddress | read-only | current | The MAC address of the port. |
| 1.3.6.1.4.1.248.100.1.6.3.1.13.2.1.16 | ColumnhmITPortMgrPortAbility | read-only | current | The physical ability of the port. |
| 1.3.6.1.4.1.248.100.1.6.3.1.13.2.1.17 | ColumnhmITPortMgrPortType | read-write | current | The port mode of the port. |
| 1.3.6.1.4.1.248.100.1.6.3.1.13.2.1.18 | ColumnhmITPortMgrJumbo | read-write | current | The jumbo status of the port. |
| 1.3.6.1.4.1.248.100.1.6.3.1.13.2.1.19 | ColumnhmITPortMgrMediumType | read-write | current | The medium type of the port. |
| 1.3.6.1.4.1.248.100.1.6.3.1.13.2.1.20 | ColumnhmITPeerDescription | read-write | current | The peer description of the port. |
| 1.3.6.1.4.1.248.100.1.6.3.1.13.2.1.21 | ColumnhmITPortMgrRowStatus | read-create | current | No longer in use. |