HMPRIV-MAX-MIB
359 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC-1215 | TRAP-TYPE |
| RFC1155-SMI | Counter enterprises IpAddress |
| RFC1213-MIB | DisplayString PhysAddress |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.248 | Nodehirschmann | |||
| 1.3.6.1.4.1.248.70 | Nodemax | |||
| 1.3.6.1.4.1.248.70.1 | Nodebasics | |||
| 1.3.6.1.4.1.248.70.1.1 | NodesystemGroup | |||
| 1.3.6.1.4.1.248.70.1.1.1 | ScalarsystemName | read-only | mandatory | A textual description of the entity. The value of this MIB object is similar to the variable <sysDescr> in MIB-II. But, this object contains the more specific … |
| 1.3.6.1.4.1.248.70.1.1.2 | ScalarsystemVersion | read-only | mandatory | A textual description of the version of software of the managed device.This MIB object specifies the version of the agent that is currently used in this agent … |
| 1.3.6.1.4.1.248.70.1.1.3 | ScalarsystemFirmwareVersion | read-only | mandatory | A textual description of the version of the firmware of the managed device. |
| 1.3.6.1.4.1.248.70.1.1.4 | ScalarsystemMacAddress | read-only | mandatory | The MAC address of the managed device. |
| 1.3.6.1.4.1.248.70.1.1.5 | ScalardeviceReset | read-write | mandatory | This MIB object could be used to reset the device. When ever the manager reads, the value will always be resetDone |
| 1.3.6.1.4.1.248.70.1.1.6 | ScalarsystemUpTime | read-only | mandatory | This is the system uptime in string format |
| 1.3.6.1.4.1.248.70.1.1.7 | ScalarsystemLocation | read-write | mandatory | System Location. Same as sysLocation in MIB-II |
| 1.3.6.1.4.1.248.70.1.1.8 | ScalarsystemContact | read-write | mandatory | System Contact. Same as sysContact in MIB-II |
| 1.3.6.1.4.1.248.70.1.1.9 | ScalarsysIpAddress | read-write | mandatory | System IP Address. |
| 1.3.6.1.4.1.248.70.1.1.10 | ScalarsysSubnet | read-write | mandatory | System Subnet. |
| 1.3.6.1.4.1.248.70.1.1.11 | ScalarsysGateway | read-write | mandatory | System Gateway. |
| 1.3.6.1.4.1.248.70.1.1.12 | ScalarsysSerial | read-only | mandatory | System Serial Number. |
| 1.3.6.1.4.1.248.70.1.1.13 | ScalarsysOrderCode | read-only | mandatory | System Order Code. |
| 1.3.6.1.4.1.248.70.1.1.14 | ScalarsysTemperature | read-only | mandatory | System Temperature measured in 1/100 of a degree. |
| 1.3.6.1.4.1.248.70.1.1.15 | ScalarsysTempUnit | read-write | mandatory | Unit of the System Temperature |
| 1.3.6.1.4.1.248.70.1.1.16 | ScalarsysPS1Status | read-write | mandatory | System Power Supply 1 Status |
| 1.3.6.1.4.1.248.70.1.1.17 | ScalarsysPS2Status | read-only | mandatory | System Power Supply 2 Status. |
| 1.3.6.1.4.1.248.70.1.1.18 | ScalarsysCPUusage | read-only | mandatory | System CPU Usage in percentage. |
| 1.3.6.1.4.1.248.70.1.1.19 | ScalarsysMemUsage | read-only | mandatory | System Memory Usage in percentage. |
| 1.3.6.1.4.1.248.70.1.2 | NodesnmpGroup | |||
| 1.3.6.1.4.1.248.70.1.2.1 | ScalarmibsInfo | read-only | mandatory | The value of this string contains the details about MIBs supported in this version of the agent. Eg. 1213(MIB-II) : 1493(Bridge) : 1757(RMON) |
| 1.3.6.1.4.1.248.70.12 | Nodeswitch | |||
| 1.3.6.1.4.1.248.70.12.6 | Nodemax25 | |||
| 1.3.6.1.4.1.248.70.12.6.1 | Nodegeneralmx | |||
| 1.3.6.1.4.1.248.70.12.6.1.1 | ScalarslotNumber | read-only | mandatory | The number of slots/modules (regardless of their current state) present on this device. |
| 1.3.6.1.4.1.248.70.12.6.1.2 | ScalarportNumber | read-only | mandatory | The number of physical ports (regardless of their current state) present on this device. |
| 1.3.6.1.4.1.248.70.12.6.2 | TableslotTable | not-accessible | mandatory | A list of slot entries. The number of entries is given by the value of slotNumber. |
| 1.3.6.1.4.1.248.70.12.6.2.1 | RowslotEntry | not-accessible | mandatory | A slot entry containing slot details in the device. |
| 1.3.6.1.4.1.248.70.12.6.2.1.1 | ColumnslotIndex | read-only | mandatory | A unique value for each slot/module. Its value ranges between 1 and the value of slotNumber. The value for each slot must remain constant at least from one re-… |
| 1.3.6.1.4.1.248.70.12.6.2.1.2 | ColumnslotName | read-only | mandatory | A unique value for each slot/module. Its value is same as slotIndex. |
| 1.3.6.1.4.1.248.70.12.6.2.1.3 | ColumnmoduleId | read-only | mandatory | Module index of the module. |
| 1.3.6.1.4.1.248.70.12.6.2.1.4 | ColumnmoduleName | read-only | mandatory | module name will be depending upon module index. |
| 1.3.6.1.4.1.248.70.12.6.3 | NodeportControl | |||
| 1.3.6.1.4.1.248.70.12.6.3.1 | ScalarsavePortControl | read-write | mandatory | Whenever thie MIB object is set to 1, the Port Control configurations(portTable) are saved. |
| 1.3.6.1.4.1.248.70.12.6.3.2 | TableportTable | not-accessible | mandatory | A list of port entries. The number of entries is given by the value of portNumber. |
| 1.3.6.1.4.1.248.70.12.6.3.2.1 | RowportEntry | not-accessible | mandatory | A port entry containing port details(of all modules) in the device. |
| 1.3.6.1.4.1.248.70.12.6.3.2.1.1 | ColumnptSlotIndex | read-only | mandatory | A unique value for each slot/module. Its value ranges between 1 and the value of slotNumber. The value for each slot must remain constant at least from one re-… |
| 1.3.6.1.4.1.248.70.12.6.3.2.1.2 | ColumnptPortIndex | read-only | mandatory | A unique value for each port. Its value ranges between 1 and the value of portNumber. |
| 1.3.6.1.4.1.248.70.12.6.3.2.1.3 | ColumnptIfIndex | read-only | mandatory | The ifIndex of this port. This index is same as that of ifIndex variable in the ifTable of MIB-II. The value of this variable will range from 1 to <ifNumber>. |
| 1.3.6.1.4.1.248.70.12.6.3.2.1.4 | ColumnptPortName | read-write | mandatory | Name of the port. |
| 1.3.6.1.4.1.248.70.12.6.3.2.1.5 | ColumnptPortControlStatus | read-write | mandatory | Enable / disable this port. |
| 1.3.6.1.4.1.248.70.12.6.3.2.1.6 | ColumnptPortStatus | read-only | mandatory | Status of the port. |
| 1.3.6.1.4.1.248.70.12.6.3.2.1.7 | ColumnptPortDuplexStatus | read-write | mandatory | Duplexity of the port. |
| 1.3.6.1.4.1.248.70.12.6.3.2.1.8 | ColumnptPortMediaType | read-only | mandatory | Port media type. |
| 1.3.6.1.4.1.248.70.12.6.3.2.1.9 | ColumnptPortLinkStatus | read-only | mandatory | Port link status. |
| 1.3.6.1.4.1.248.70.12.6.3.2.1.10 | ColumnptPortSpeed | read-write | mandatory | Port speed. |
| 1.3.6.1.4.1.248.70.12.6.3.2.1.11 | ColumnptPortPartitionState | read-only | mandatory | State of port partition. |
| 1.3.6.1.4.1.248.70.12.6.3.2.1.12 | ColumnptPortTraffic | read-only | mandatory | This object gives the count of only received packets on this particular port. This object can be used to check the activity on this port. |
| 1.3.6.1.4.1.248.70.12.6.3.2.1.13 | ColumnptPortAutoNegotiation | read-write | mandatory | Enable/disable of port's Auto negotiation. |
| 1.3.6.1.4.1.248.70.12.6.3.2.1.14 | ColumnptPortNotify | read-write | mandatory | Notify Status. |
| 1.3.6.1.4.1.248.70.12.6.4 | NodeportMirroring | |||
| 1.3.6.1.4.1.248.70.12.6.4.1 | ScalarmonitorPort | read-write | mandatory | Monitored port number. |
| 1.3.6.1.4.1.248.70.12.6.4.2 | ScalarsnifferPort | read-write | mandatory | Sniffer port number. |
| 1.3.6.1.4.1.248.70.12.6.4.3 | ScalarportMirroringControl | read-write | mandatory | User can control port mirroring through this MIB object. |
| 1.3.6.1.4.1.248.70.12.6.4.4 | ScalarsavePortMirroring | read-write | mandatory | Whenever thie MIB object is set to 1, the Port Mirroring configurations are saved. |
| 1.3.6.1.4.1.248.70.12.6.4.5 | ScalarmonitorPortList | read-write | mandatory | Monitored port List. |
| 1.3.6.1.4.1.248.70.12.6.5 | NodepriorityQueuing | |||
| 1.3.6.1.4.1.248.70.12.6.5.1 | ScalarpriorityQueueControl | read-write | mandatory | User can control priority queueing through this MIB object. |
| 1.3.6.1.4.1.248.70.12.6.5.2 | ScalarsavePriorityQueue | read-write | mandatory | Whenever thie MIB object is set to 1, the Priority Queue configurations (priorityQueueControl + priorityQueueTable) are saved. |
| 1.3.6.1.4.1.248.70.12.6.5.3 | TablepriorityQueueTable | not-accessible | mandatory | A list of priority queue entries. The number of entries is given by the value of portNumber. |
| 1.3.6.1.4.1.248.70.12.6.5.3.1 | RowpriorityQueueEntry | not-accessible | mandatory | A priority queue values for each ports in the device. |
| 1.3.6.1.4.1.248.70.12.6.5.3.1.1 | ColumnpqPortIndex | read-only | mandatory | Port index of this port. |
| 1.3.6.1.4.1.248.70.12.6.5.3.1.2 | ColumnpqControlStatus | read-write | mandatory | Enable/disable the priority queuing on this port. |
| 1.3.6.1.4.1.248.70.12.6.5.3.1.3 | ColumnpqDefaultQueue | read-write | mandatory | Default queue for this port. If the value of this object is none(3), then the packets coming with priorities(0-7) will go to queue(low/high) as specified by th… |
| 1.3.6.1.4.1.248.70.12.6.5.3.1.4 | ColumnpriorityForUntaggedPktsOnHighQ | read-write | mandatory | Queue for untagged packets received on HIGH queue on this port. |
| 1.3.6.1.4.1.248.70.12.6.5.3.1.5 | ColumnpriorityForUntaggedPktsOnLowQ | read-write | mandatory | Queue for untagged packets received on LOW queue on this port. |
| 1.3.6.1.4.1.248.70.12.6.5.3.1.6 | ColumnqForPktsWithPriority0 | read-write | mandatory | Queue for packets with priority value zero, received on this port. |
| 1.3.6.1.4.1.248.70.12.6.5.3.1.7 | ColumnqForPktsWithPriority1 | read-write | mandatory | Queue for packets with priority value one, received on this port. |
| 1.3.6.1.4.1.248.70.12.6.5.3.1.8 | ColumnqForPktsWithPriority2 | read-write | mandatory | Queue for packets with priority value two, received on this port. |
| 1.3.6.1.4.1.248.70.12.6.5.3.1.9 | ColumnqForPktsWithPriority3 | read-write | mandatory | Queue for packets with priority value three, received on this port. |
| 1.3.6.1.4.1.248.70.12.6.5.3.1.10 | ColumnqForPktsWithPriority4 | read-write | mandatory | Queue for packets with priority value four, received on this port. |
| 1.3.6.1.4.1.248.70.12.6.5.3.1.11 | ColumnqForPktsWithPriority5 | read-write | mandatory | Queue for packets with priority value five, received on this port. |
| 1.3.6.1.4.1.248.70.12.6.5.3.1.12 | ColumnqForPktsWithPriority6 | read-write | mandatory | Queue for packets with priority value six, received on this port. |
| 1.3.6.1.4.1.248.70.12.6.5.3.1.13 | ColumnqForPktsWithPriority7 | read-write | mandatory | Queue for packets with priority value seven, received on this port. |
| 1.3.6.1.4.1.248.70.12.6.6 | Nodelayer3Qos | |||
| 1.3.6.1.4.1.248.70.12.6.6.1 | Scalarlayer3QosControl | read-write | mandatory | User can control layer 3 QOS through this MIB object. |
| 1.3.6.1.4.1.248.70.12.6.6.2 | Scalarsavelayer3Qos | read-write | mandatory | Whenever thie MIB object is set to 1, the layer 3 QOS configurations (layer3QosControl + layer3QosPortTable + layer3QosQueueTable) are saved. |
| 1.3.6.1.4.1.248.70.12.6.6.3 | Tablelayer3QosPortTable | not-accessible | mandatory | A list of ports, where user can enable/disable Layer 3 QOS per port basis. |
| 1.3.6.1.4.1.248.70.12.6.6.3.1 | Rowlayer3QosPortEntry | not-accessible | mandatory | Entry contains the layer3 QOS Control status for each ports in the device. |
| 1.3.6.1.4.1.248.70.12.6.6.3.1.1 | Columnl3qptPortIndex | read-only | mandatory | Port index of this port. |
| 1.3.6.1.4.1.248.70.12.6.6.3.1.2 | Columnl3QosControlStatus | read-write | mandatory | Enable/disable the Layer 3 QOS on this port. |
| 1.3.6.1.4.1.248.70.12.6.6.4 | Tablelayer3QosQueueTable | not-accessible | mandatory | A list of ports, where each port has 64 QOS values. |
| 1.3.6.1.4.1.248.70.12.6.6.4.1 | Rowlayer3QosQueueEntry | not-accessible | mandatory | Entry contains the Queue(High/Low) value for each DSCP id, where DSCP ids range from 1-64 for all the ports in the device. |
| 1.3.6.1.4.1.248.70.12.6.6.4.1.1 | Columnl3qqtPortIndex | read-only | mandatory | Port index of this port. |
| 1.3.6.1.4.1.248.70.12.6.6.4.1.2 | Columnl3qqtDscpIndex | read-only | mandatory | The value of DSCP Id. This object can take any value from 1 to 64. |
| 1.3.6.1.4.1.248.70.12.6.6.4.1.3 | Columnl3qqtQueueValue | read-write | mandatory | The queue for this port and dscpId. |
| 1.3.6.1.4.1.248.70.12.6.7 | NodeportSecurity | |||
| 1.3.6.1.4.1.248.70.12.6.7.1 | ScalarportSecurityControl | read-write | mandatory | User can control port security through this MIB object. |
| 1.3.6.1.4.1.248.70.12.6.7.2 | ScalarsaveportSecurity | read-write | mandatory | Whenever thie MIB object is set to 1, the portSecurity configurations (portSecurityControl + portSecurityTable + actionSignalTable) are saved. |
| 1.3.6.1.4.1.248.70.12.6.7.3 | TableportSecurityTable | not-accessible | mandatory | A list of MAC addresses which are to be allowed on these ports. |
| 1.3.6.1.4.1.248.70.12.6.7.3.1 | RowportSecurityEntry | not-accessible | mandatory | Each entry contains the MAC addresses allowed on this port. |
| 1.3.6.1.4.1.248.70.12.6.7.3.1.1 | ColumnpsPortIndex | read-only | mandatory | Port index of this port. |
| 1.3.6.1.4.1.248.70.12.6.7.3.1.2 | ColumnpsEntryIndex | read-only | mandatory | The entry index of this row in the table. |
| 1.3.6.1.4.1.248.70.12.6.7.3.1.3 | ColumnpsMacAddress | read-write | mandatory | The MAC address of the device, whose packets are to be allowed on this port. |
| 1.3.6.1.4.1.248.70.12.6.7.3.1.4 | ColumnpsEntryStatus | read-write | mandatory | Include is to add a new entry in the table. Exclude will delete the entire row in the table. |
| 1.3.6.1.4.1.248.70.12.6.7.4 | TableactionSignalTable | not-accessible | mandatory | A Table for taking the action/signal, after getting an unauthorized packet arrives on the ports of the device. |
| 1.3.6.1.4.1.248.70.12.6.7.4.1 | RowactionSignalEntry | not-accessible | mandatory | Each entry contains the action and signal methods on this port. |
| 1.3.6.1.4.1.248.70.12.6.7.4.1.1 | ColumnatPortIndex | read-only | mandatory | Port index of this port. |
| 1.3.6.1.4.1.248.70.12.6.7.4.1.2 | ColumnatAction | read-write | mandatory | The action to be taken for an unauthorized MAC address. |
| 1.3.6.1.4.1.248.70.12.6.7.4.1.3 | ColumnatSignal | read-write | mandatory | The signal to be done for an unauthorized MAC address. |
| 1.3.6.1.4.1.248.70.12.6.7.4.1.4 | ColumnatLearnMode | read-write | mandatory | To enable / disable the learn mode on this port. |
| 1.3.6.1.4.1.248.70.12.6.8 | Nodevlan | |||
| 1.3.6.1.4.1.248.70.12.6.8.1 | ScalarvlanType | read-write | mandatory | The type of VLAN. At any point of time, only one type of VLAN can be running. |
| 1.3.6.1.4.1.248.70.12.6.8.2 | NodeportBasedVLAN | |||
| 1.3.6.1.4.1.248.70.12.6.8.2.1 | ScalarmaxPVLAN | read-only | mandatory | The maximum number of port based VLANs possible. |
| 1.3.6.1.4.1.248.70.12.6.8.2.2 | ScalarpvlansCreated | read-only | mandatory | The number of port based VLANs created. This counter is incremented by one, whenever user creates a port based VLAN. |
| 1.3.6.1.4.1.248.70.12.6.8.2.3 | Scalarsavepvlan | read-write | mandatory | Whenever thie MIB object is set to 1, the port based VLAN configurations are saved. |
| 1.3.6.1.4.1.248.70.12.6.8.2.4 | ScalarpvlanControlStatus | read-write | mandatory | To start/stop port based VLAN. |
| 1.3.6.1.4.1.248.70.12.6.8.2.5 | TablepvlanTable | not-accessible | mandatory | Port based VLAN table. |
| 1.3.6.1.4.1.248.70.12.6.8.2.5.1 | RowpvlanEntry | not-accessible | mandatory | Port based VLAN entries. |
| 1.3.6.1.4.1.248.70.12.6.8.2.5.1.1 | ColumnpvlanIndex | read-only | mandatory | Port based VLAN Index. |
| 1.3.6.1.4.1.248.70.12.6.8.2.5.1.2 | ColumnpvlanName | read-write | mandatory | Port based VLAN name. |
| 1.3.6.1.4.1.248.70.12.6.8.2.5.1.3 | ColumnpvlanPortList | read-write | mandatory | Port numbers separated by comma. Eg. 1,4,6,2. |
| 1.3.6.1.4.1.248.70.12.6.8.2.5.1.4 | ColumnpvlanEntryStatus | read-write | mandatory | Entry status of this Port based VLAN. |
| 1.3.6.1.4.1.248.70.12.6.8.4 | NodetagBasedVLAN | |||
| 1.3.6.1.4.1.248.70.12.6.8.4.1 | ScalarmaxTVLAN | read-only | mandatory | The maximum number of Tag based VLANs possible. |
| 1.3.6.1.4.1.248.70.12.6.8.4.2 | ScalartvlansCreated | read-only | mandatory | The number of Tag based VLANs created. This counter is incremented by one, whenever user creates a Tag based VLAN. |
| 1.3.6.1.4.1.248.70.12.6.8.4.3 | Scalarsavetvlan | read-write | mandatory | Whenever thie MIB object is set to 1, the Tag based VLAN configurations are saved. |
| 1.3.6.1.4.1.248.70.12.6.8.4.4 | ScalartvlanControlStatus | read-write | mandatory | To start/stop Tag based VLAN. |
| 1.3.6.1.4.1.248.70.12.6.8.4.5 | TabletvlanTable | not-accessible | mandatory | Tag based VLAN table. |
| 1.3.6.1.4.1.248.70.12.6.8.4.5.1 | RowtvlanEntry | not-accessible | mandatory | Tag based VLAN entries. |
| 1.3.6.1.4.1.248.70.12.6.8.4.5.1.1 | ColumntvlanIndex | read-only | mandatory | Tag based VLAN Index. |
| 1.3.6.1.4.1.248.70.12.6.8.4.5.1.2 | ColumntvlanName | read-write | mandatory | Name for this Tag based VLAN. |
| 1.3.6.1.4.1.248.70.12.6.8.4.5.1.3 | ColumntvlanPortList | read-write | mandatory | Port numbers separated by comma. Eg. 1,4,6,2. |
| 1.3.6.1.4.1.248.70.12.6.8.4.5.1.4 | ColumntvlanEgressRules | read-write | mandatory | Egress rules. Eg. 1-t,2-u,3-t |
| 1.3.6.1.4.1.248.70.12.6.8.4.5.1.5 | ColumntvlanEntryStatus | read-write | mandatory | Entry status of this tag based VLAN entry. |
| 1.3.6.1.4.1.248.70.12.6.8.4.6 | TableingressTable | not-accessible | mandatory | Ingress Table. |
| 1.3.6.1.4.1.248.70.12.6.8.4.6.1 | RowingressEntry | not-accessible | mandatory | Ingress table entries. |
| 1.3.6.1.4.1.248.70.12.6.8.4.6.1.1 | ColumnportIndex | read-only | mandatory | Port number. |
| 1.3.6.1.4.1.248.70.12.6.8.4.6.1.2 | ColumnportDefaultId | read-write | mandatory | Port default Id. |
| 1.3.6.1.4.1.248.70.12.6.8.4.6.1.3 | ColumninCheck | read-write | mandatory | Incheck status. |
| 1.3.6.1.4.1.248.70.12.6.9 | NodemagnumStpGroup | |||
| 1.3.6.1.4.1.248.70.12.6.9.1 | TablemagnumBrStpTable | not-accessible | mandatory | Table of bridge spanning tree information. |
| 1.3.6.1.4.1.248.70.12.6.9.1.1 | RowmagnumBrStpEntry | not-accessible | mandatory | An entry in the magnumBrStpTable. |
| 1.3.6.1.4.1.248.70.12.6.9.1.1.1 | ColumnmagnumBrStpIndex | read-only | mandatory | This object uniquely identifies the lan or virtual lan. |
| 1.3.6.1.4.1.248.70.12.6.9.1.1.2 | ColumnmagnumBrStpDesignatedRoot | read-only | mandatory | STP Designated Root |
| 1.3.6.1.4.1.248.70.12.6.9.1.1.3 | ColumnmagnumBrStpRootPathCost | read-only | mandatory | This field holds the cost of the path to the Root Bridge from this Bridge . |
| 1.3.6.1.4.1.248.70.12.6.9.1.1.4 | ColumnmagnumBrStpRootPort | read-only | mandatory | The port number of the port which offers the lowest cost path from this bridge to the root bridge. |
| 1.3.6.1.4.1.248.70.12.6.9.1.1.5 | ColumnmagnumBrStpRootBridgeMaxAge | read-only | mandatory | STP Bridge MAx Age |
| 1.3.6.1.4.1.248.70.12.6.9.1.1.6 | ColumnmagnumBrStpRootBridgeHelloTime | read-only | mandatory | Root Bridge Hello Time |
| 1.3.6.1.4.1.248.70.12.6.9.1.1.7 | ColumnmagnumBrStpRootBridgeFwdDelay | read-only | mandatory | Root Bridge Fwd Delay |
| 1.3.6.1.4.1.248.70.12.6.9.1.1.8 | ColumnmagnumBrStpBridgeId | read-only | mandatory | This holds the unique bridge identifier for the Bridge. |
| 1.3.6.1.4.1.248.70.12.6.9.1.1.9 | ColumnmagnumBrStpBridgeMaxAge | read-write | mandatory | Bridge Max Age |
| 1.3.6.1.4.1.248.70.12.6.9.1.1.10 | ColumnmagnumBrStpBridgeHelloTime | read-write | mandatory | Bridge Hello time |
| 1.3.6.1.4.1.248.70.12.6.9.1.1.11 | ColumnmagnumBrStpBridgeFwdDelay | read-write | mandatory | Bridge Fwd Delay |
| 1.3.6.1.4.1.248.70.12.6.9.1.1.12 | ColumnmagnumBrStpTopChangeDetected | read-only | mandatory | This object indicates that whether a topology change has been detected/notified to the bridge. |
| 1.3.6.1.4.1.248.70.12.6.9.1.1.13 | ColumnmagnumBrStpTopChange | read-only | mandatory | This field holds the value of the topology change flag in the configuration BPDU's sent by the bridge . |
| 1.3.6.1.4.1.248.70.12.6.9.1.1.14 | ColumnmagnumBrStpHoldTime | read-only | mandatory | This time value determines the interval length during which no more than two Configuration bridge PDUs shall be transmitted by this node, in units of hundredth… |
| 1.3.6.1.4.1.248.70.12.6.9.1.1.15 | ColumnmagnumBrStpAdminStatus | read-write | mandatory | This field holds the user-defined administartive status of the spanning tree protocol operation . |
| 1.3.6.1.4.1.248.70.12.6.9.2 | TablemagnumStpPortTable | not-accessible | mandatory | A table that contains port-specific information for the Spanning Tree Protocol. |
| 1.3.6.1.4.1.248.70.12.6.9.2.1 | RowmagnumStpPortEntry | not-accessible | mandatory | A list of information maintained by every port about the Spanning Tree Protocol state for that port. |
| 1.3.6.1.4.1.248.70.12.6.9.2.1.1 | ColumnmagnumStpPort | read-only | mandatory | The port number of the port for which this entry contains Spanning Tree Protocol management information. |
| 1.3.6.1.4.1.248.70.12.6.9.2.1.2 | ColumnmagnumStpPortState | read-only | mandatory | STP Port State |
| 1.3.6.1.4.1.248.70.12.6.9.2.1.3 | ColumnmagnumStpPortPathCost | read-write | mandatory | Port Path Cost |
| 1.3.6.1.4.1.248.70.12.6.9.2.1.4 | ColumnmagnumStpPortDesignatedRoot | read-only | mandatory | The unique Bridge Identifier of the Bridge recorded as the Root in the Configuration BPDUs transmitted by the Designated Bridge for the segment to which the po… |
| 1.3.6.1.4.1.248.70.12.6.9.2.1.5 | ColumnmagnumStpPortDesignatedCost | read-only | mandatory | The path cost of the Designated Port of the segment connected to this port. This value is compared to the Root Path Cost field in received bridge PDUs. |
| 1.3.6.1.4.1.248.70.12.6.9.2.1.6 | ColumnmagnumStpPortDesignatedBridge | read-only | mandatory | The Bridge Identifier of the bridge which this port considers to be the Designated Bridge for this port's segment. |
| 1.3.6.1.4.1.248.70.12.6.9.2.1.7 | ColumnmagnumStpPortDesignatedPort | read-only | mandatory | The Port Identifier of the port on the Designated Bridge for this port's segment. |
| 1.3.6.1.4.1.248.70.12.6.9.2.1.8 | ColumnmagnumStpTopChangeAck | read-only | mandatory | This field is a flag indicating the value of the topology change. acknowledgement flag in the next configuration BPDU to be transmitted on the port. |
| 1.3.6.1.4.1.248.70.12.6.9.2.1.9 | ColumnmagnumStpConfigPending | read-only | mandatory | This filed is a flag indicating that a configuration BPDU be transmitted on expiration of the hold timer for the port. |
| 1.3.6.1.4.1.248.70.12.6.9.2.1.10 | ColumnmagnumStpPortPriority | read-write | mandatory | The priority of the port in the bridge. |
| 1.3.6.1.4.1.248.70.12.6.11 | NodemagnumBridgeGroup | |||
| 1.3.6.1.4.1.248.70.12.6.11.1 | ScalarmagnumStpBridgeAgingTime | read-write | mandatory | Bridge Aging Time |
| 1.3.6.1.4.1.248.70.12.6.11.2 | ScalarmagnumMgtBridgeTime | read-write | mandatory | Maanagement Aging Time |
| 1.3.6.1.4.1.248.70.12.6.11.3 | ScalarmagnumbridgeMacCount | read-only | mandatory | Mac Count |
| 1.3.6.1.4.1.248.70.12.6.12 | NodemagnumEventMgrGroup | |||
| 1.3.6.1.4.1.248.70.12.6.12.1 | ScalarmagnumEventsRaised | read-only | mandatory | Events Raised |
| 1.3.6.1.4.1.248.70.12.6.12.2 | ScalarmagnumSizeOfEventQueue | read-write | mandatory | Event Queue |
| 1.3.6.1.4.1.248.70.12.6.12.3 | ScalarmagnumEventLogInvalidEvents | read-only | mandatory | Invalid Events |
| 1.3.6.1.4.1.248.70.12.6.12.4 | ScalarmagnumEventLogCriticalEvents | read-only | mandatory | Critical events |
| 1.3.6.1.4.1.248.70.12.6.12.5 | ScalarmagnumEventLogDebugEvents | read-only | mandatory | Debug Events |
| 1.3.6.1.4.1.248.70.12.6.12.6 | ScalarmagnumEventLogFatalEvents | read-only | mandatory | Fatal Events |
| 1.3.6.1.4.1.248.70.12.6.12.7 | ScalarmagnumEventLogActivityEvents | read-only | mandatory | Activity Events |
| 1.3.6.1.4.1.248.70.12.6.12.8 | ScalarmagnumEventLogInfoEvents | read-only | mandatory | Informational Events |
| 1.3.6.1.4.1.248.70.12.6.12.9 | TablemagnumEventTable | not-accessible | mandatory | Event Table |
| 1.3.6.1.4.1.248.70.12.6.12.9.1 | RowmagnumEventEntry | not-accessible | mandatory | Event entry |
| 1.3.6.1.4.1.248.70.12.6.12.9.1.1 | ColumnmagnumEventIndex | read-only | mandatory | This object indicates the running serial number of the Event recorded in the Event Log Table. |
| 1.3.6.1.4.1.248.70.12.6.12.9.1.2 | ColumnmagnumEventCode | read-only | mandatory | An internal code which details the cause of the event.It is intended for use by customer service personnel only . |
| 1.3.6.1.4.1.248.70.12.6.12.9.1.3 | ColumnmagnumEventModuleId | read-only | mandatory | The module Id of the module which sent this event . |
| 1.3.6.1.4.1.248.70.12.6.12.9.1.4 | ColumnmagnumEventSeverity | read-only | mandatory | Event Severity |
| 1.3.6.1.4.1.248.70.12.6.12.9.1.5 | ColumnmagnumEventTimeStamp | read-only | mandatory | The Timestamp of the event. |
| 1.3.6.1.4.1.248.70.12.6.13 | NodemagnumTftpGroup | |||
| 1.3.6.1.4.1.248.70.12.6.13.1 | ScalarmagnumTFTPSeverIpAddress | read-write | mandatory | The ipaddress of the Tftp server. |
| 1.3.6.1.4.1.248.70.12.6.13.2 | ScalarmagnumTFTPRemoteFileName | read-write | mandatory | The field gives the file name to be downloaded. |
| 1.3.6.1.4.1.248.70.12.6.13.3 | ScalarmagnumTFTPTransferType | read-only | mandatory | This field gives the file transfer type of the TFTP. |
| 1.3.6.1.4.1.248.70.12.6.13.4 | ScalarmagnumTFTPAction | read-write | mandatory | TFTP Action |
| 1.3.6.1.4.1.248.70.12.6.13.5 | ScalarmagnumTFTPTrfrStatus | read-only | mandatory | This object returns the result of the last file transfer other - No File Transfer in progress pending - File Transfer in progress success - File Transfer is su… |
| 1.3.6.1.4.1.248.70.12.6.14 | NodemagnumSNTPGroup | |||
| 1.3.6.1.4.1.248.70.12.6.14.1 | ScalarsntpStatus | read-write | mandatory | Enables or disables SNTP feature. |
| 1.3.6.1.4.1.248.70.12.6.14.2 | ScalarsntpTimeFormat | read-write | mandatory | Time Format |
| 1.3.6.1.4.1.248.70.12.6.14.3 | ScalarsntpDateFormat | read-write | mandatory | Date Format |
| 1.3.6.1.4.1.248.70.12.6.14.4 | ScalarsntpDisplayDate | read-only | mandatory | Display Date |
| 1.3.6.1.4.1.248.70.12.6.14.5 | ScalarsntpDisplayTime | read-only | mandatory | Display Time |
| 1.3.6.1.4.1.248.70.12.6.14.6 | ScalarsntpDisplayTimeZone | read-only | mandatory | Time Zone |
| 1.3.6.1.4.1.248.70.12.6.14.7 | ScalarsntpDayLightSavings | read-write | mandatory | Daylight Savings |
| 1.3.6.1.4.1.248.70.12.6.14.8 | TablemagnumSNTPTable | not-accessible | mandatory | SNTP Table |
| 1.3.6.1.4.1.248.70.12.6.14.8.1 | RowmagnumSNTPEntry | not-accessible | mandatory | SNTP Entry |
| 1.3.6.1.4.1.248.70.12.6.14.8.1.1 | ColumnsntpIndex | read-only | mandatory | Sntp Index |
| 1.3.6.1.4.1.248.70.12.6.14.8.1.2 | ColumnsntpServerIp | read-write | mandatory | Server IP |
| 1.3.6.1.4.1.248.70.12.6.14.8.1.3 | ColumnsocketTimeout | read-write | mandatory | Timeout |
| 1.3.6.1.4.1.248.70.12.6.14.8.1.4 | ColumnnoOfRetries | read-write | mandatory | Retries |
| 1.3.6.1.4.1.248.70.12.6.14.8.1.5 | ColumnsntpOperation | read-write | mandatory | Operation |
| 1.3.6.1.4.1.248.70.12.6.15 | NodemagnumGVRPGroup | |||
| 1.3.6.1.4.1.248.70.12.6.15.1 | ScalardeviceGVRPState | read-write | mandatory | This object indicates whether GVRP feature is enabled or disable for Tag-based VLANs. |
| 1.3.6.1.4.1.248.70.12.6.15.2 | TablemagnumGVRPPortTable | not-accessible | mandatory | This table shows/sets the GVRP port states. |
| 1.3.6.1.4.1.248.70.12.6.15.2.1 | RowmagnumGVRPPortEntry | not-accessible | mandatory | GVRP Port Entry |
| 1.3.6.1.4.1.248.70.12.6.15.2.1.1 | ColumngvrpPortIndex | read-only | mandatory | GVRP Port Index |
| 1.3.6.1.4.1.248.70.12.6.15.2.1.2 | ColumngvrpPortState | read-write | mandatory | GVRP Port State |
| 1.3.6.1.4.1.248.70.12.6.16 | NodemagnumPortManagerGroup | |||
| 1.3.6.1.4.1.248.70.12.6.16.1 | TablemagnumPortManagerTable | not-accessible | mandatory | Port Manager |
| 1.3.6.1.4.1.248.70.12.6.16.1.1 | RowmagnumPortManagerEntry | not-accessible | mandatory | An entry in the magnumPortManagerTable. |
| 1.3.6.1.4.1.248.70.12.6.16.1.1.1 | ColumnmagnumPortNumber | read-only | mandatory | Port Number |
| 1.3.6.1.4.1.248.70.12.6.16.1.1.2 | ColumnmagnumPortName | read-write | mandatory | Port Name |
| 1.3.6.1.4.1.248.70.12.6.16.1.1.3 | ColumnmagnumPortSpeed | read-write | mandatory | Port Speed |
| 1.3.6.1.4.1.248.70.12.6.16.1.1.4 | ColumnmagnumPortDuplexMode | read-write | mandatory | Duplex Mode |
| 1.3.6.1.4.1.248.70.12.6.16.1.1.5 | ColumnmagnumPortAutoNegotiationMode | read-write | mandatory | AutoNeg Mode |
| 1.3.6.1.4.1.248.70.12.6.16.1.1.6 | ColumnmagnumPortFlowControl | read-write | mandatory | Flow Ctrl |
| 1.3.6.1.4.1.248.70.12.6.16.1.1.7 | ColumnmagnumPortBackPressure | read-write | mandatory | Back Pressure |
| 1.3.6.1.4.1.248.70.12.6.16.1.1.8 | ColumnmagnumPortVLANId | read-only | mandatory | Vlan Id |
| 1.3.6.1.4.1.248.70.12.6.16.1.1.9 | ColumnmagnumPortGVRPstate | read-only | mandatory | GVRP State |
| 1.3.6.1.4.1.248.70.12.6.16.1.1.10 | ColumnmagnumPortSTPstate | read-only | mandatory | STP State |
| 1.3.6.1.4.1.248.70.12.6.16.1.1.11 | ColumnmagnumPortLinkState | read-only | mandatory | Link State |
| 1.3.6.1.4.1.248.70.12.6.16.1.1.12 | ColumnmagnumPortInterfaceType | read-only | mandatory | Interface type |
| 1.3.6.1.4.1.248.70.12.6.16.1.1.13 | ColumnmagnumPortSecurityState | read-only | mandatory | PortSec State |
| 1.3.6.1.4.1.248.70.12.6.16.1.1.14 | ColumnmagnumPortTaggingState | read-only | mandatory | Tagging State |
| 1.3.6.1.4.1.248.70.12.6.16.1.1.15 | ColumnmagnumPortNotifyState | read-write | mandatory | Notify State |
| 1.3.6.1.4.1.248.70.12.6.16.2 | TablemagnumPortStatsTable | not-accessible | mandatory | Port Stats |
| 1.3.6.1.4.1.248.70.12.6.16.2.1 | RowmagnumPortStatsEntry | not-accessible | mandatory | An entry in the MagnumPortstatsTable. |
| 1.3.6.1.4.1.248.70.12.6.16.2.1.1 | ColumnportStatsIndex | read-only | mandatory | Index |
| 1.3.6.1.4.1.248.70.12.6.16.2.1.2 | ColumnportBytesReceived | read-only | mandatory | Bytes Received |
| 1.3.6.1.4.1.248.70.12.6.16.2.1.3 | ColumnportBytesSent | read-only | mandatory | Bytes Sent |
| 1.3.6.1.4.1.248.70.12.6.16.2.1.4 | ColumnportFramesReceived | read-only | mandatory | Frames Received |
| 1.3.6.1.4.1.248.70.12.6.16.2.1.5 | ColumnportFramesSent | read-only | mandatory | Frames Sent |
| 1.3.6.1.4.1.248.70.12.6.16.2.1.6 | ColumnportTotalBytesReceived | read-only | mandatory | Bytes Received |
| 1.3.6.1.4.1.248.70.12.6.16.2.1.7 | ColumnportTotalFramesReceived | read-only | mandatory | Frames Received |
| 1.3.6.1.4.1.248.70.12.6.16.2.1.8 | ColumnportBroadcastFramesReceived | read-only | mandatory | Bcast Frames Received |
| 1.3.6.1.4.1.248.70.12.6.16.2.1.9 | ColumnportMulticastFramesReceived | read-only | mandatory | Mcast Frames Received |
| 1.3.6.1.4.1.248.70.12.6.16.2.1.10 | ColumnportCrcErrors | read-only | mandatory | CRC Errors |
| 1.3.6.1.4.1.248.70.12.6.16.2.1.11 | ColumnportOversizeFrames | read-only | mandatory | Oversize Frames |
| 1.3.6.1.4.1.248.70.12.6.16.2.1.12 | ColumnportFragments | read-only | mandatory | Fragments |
| 1.3.6.1.4.1.248.70.12.6.16.2.1.13 | ColumnportJabbers | read-only | mandatory | Jabbers |
| 1.3.6.1.4.1.248.70.12.6.16.2.1.14 | ColumnportCollissions | read-only | mandatory | Collisions |
| 1.3.6.1.4.1.248.70.12.6.16.2.1.15 | ColumnportLateCollissions | read-only | mandatory | Late Collisions |
| 1.3.6.1.4.1.248.70.12.6.16.2.1.16 | ColumnportFrames67-127 | read-only | mandatory | Frames67-127 |
| 1.3.6.1.4.1.248.70.12.6.16.2.1.17 | ColumnportFrames128-255 | read-only | mandatory | Frames127-255 |
| 1.3.6.1.4.1.248.70.12.6.16.2.1.18 | ColumnportFrames256-511 | read-only | mandatory | Frames256-511 |
| 1.3.6.1.4.1.248.70.12.6.16.2.1.19 | ColumnportFrames512-1023 | read-only | mandatory | Frames512-1023 |
| 1.3.6.1.4.1.248.70.12.6.16.2.1.20 | ColumnportFrames1024-MaxSize | read-only | mandatory | Frames1024-Max |
| 1.3.6.1.4.1.248.70.12.6.16.2.1.21 | ColumnportMacRxErrors | read-only | mandatory | Mac Rx Err |
| 1.3.6.1.4.1.248.70.12.6.16.2.1.22 | ColumnportDroppedFrames | read-only | mandatory | Dropped |
| 1.3.6.1.4.1.248.70.12.6.16.2.1.23 | ColumnportOutMulticastFrames | read-only | mandatory | Multicast Frames |
| 1.3.6.1.4.1.248.70.12.6.16.2.1.24 | ColumnportOutBroadcastFrames | read-only | mandatory | Broadcast Frames |
| 1.3.6.1.4.1.248.70.12.6.16.2.1.25 | ColumnportUndersizeFrames | read-only | mandatory | Undersize |
| 1.3.6.1.4.1.248.70.12.6.16.2.1.26 | ColumnportClearStatistics | read-write | mandatory | Clear Stats |
| 1.3.6.1.4.1.248.70.12.6.16.3 | TablemagnumPortQosTable | not-accessible | mandatory | QOS |
| 1.3.6.1.4.1.248.70.12.6.16.3.1 | RowmagnumPortQosEntry | not-accessible | mandatory | An entry in the magnumPortManagerTable. |
| 1.3.6.1.4.1.248.70.12.6.16.3.1.1 | ColumnmagnumPortQosIndex | read-write | mandatory | Index |
| 1.3.6.1.4.1.248.70.12.6.16.3.1.2 | ColumnmagnumPortQosPriority | read-write | mandatory | Priority |
| 1.3.6.1.4.1.248.70.12.6.16.3.1.3 | ColumnmagnumTypeOfService | read-write | mandatory | Type |
| 1.3.6.1.4.1.248.70.12.6.16.4 | TablemagnumDeviceQosTable | not-accessible | mandatory | QOS |
| 1.3.6.1.4.1.248.70.12.6.16.4.1 | RowmagnumDeviceQosEntry | not-accessible | mandatory | An entry in the magnumPortManagerTable. |
| 1.3.6.1.4.1.248.70.12.6.16.4.1.1 | ColumnmagnumDeviceQosIndex | read-only | mandatory | Index |
| 1.3.6.1.4.1.248.70.12.6.16.4.1.2 | ColumnmagnumDefaultQos | read-write | mandatory | Default |
| 1.3.6.1.4.1.248.70.12.6.16.4.1.3 | ColumnmagnumTagQos | read-write | mandatory | TagQOS |
| 1.3.6.1.4.1.248.70.12.6.16.4.1.4 | ColumnmagnumIpQos | read-write | mandatory | IpQOS |
| 1.3.6.1.4.1.248.70.12.6.20 | NodemagnumConfigManagerGroup | |||
| 1.3.6.1.4.1.248.70.12.6.20.1 | ScalarsaveConfig | read-write | mandatory | Whenever thie MIB object is set to 1, the MAC based VLAN configurations are saved. |
| 1.3.6.1.4.1.248.70.12.6.21 | NodemagnumIGMPGroup | |||
| 1.3.6.1.4.1.248.70.12.6.21.1 | ScalardeviceIGMPState | read-write | mandatory | This object indicates whether IGMP feature is enabled or disabled. |
| 1.3.6.1.4.1.248.70.12.6.21.2 | ScalarimmediateLeave | read-write | mandatory | Enables/Disables IGMP immediate leave status. |
| 1.3.6.1.4.1.248.70.12.6.21.3 | ScalarswitchQuerier | read-write | mandatory | Enables/Disables the switch as an IGMP querier. |
| 1.3.6.1.4.1.248.70.12.6.21.4 | ScalarqueryInterval | read-write | mandatory | Sets the query interval [60-270] for router ports. |
| 1.3.6.1.4.1.248.70.12.6.21.5 | ScalarqueryResponseInterval | read-write | mandatory | Sets the query response interval for group membership ports |
| 1.3.6.1.4.1.248.70.12.6.21.6 | TablemagnumIGMPGroupTable | not-accessible | mandatory | This table shows the IGMP Multicast Groups. |
| 1.3.6.1.4.1.248.70.12.6.21.6.1 | RowmagnumIGMPGroupEntry | not-accessible | mandatory | IGMP Group Entry |
| 1.3.6.1.4.1.248.70.12.6.21.6.1.1 | ColumnigmpGroupIndex | read-only | mandatory | IGMP Group Index |
| 1.3.6.1.4.1.248.70.12.6.21.6.1.2 | ColumnigmpGroupAddress | read-only | mandatory | Group Multicast address |
| 1.3.6.1.4.1.248.70.12.6.21.6.1.3 | ColumnigmpGroupPort | read-only | mandatory | Group Port Member |
| 1.3.6.1.4.1.248.70.12.6.21.6.1.4 | ColumnigmpGroupTimer | read-only | mandatory | Group Timer |
| 1.3.6.1.4.1.248.70.12.6.21.6.1.5 | ColumnigmpGroupLeaveP | read-only | mandatory | Group Leave Pending |
| 1.3.6.1.4.1.248.70.12.6.21.7 | TablemagnumIGMPRouterTable | not-accessible | mandatory | This table shows the IGMP Router entries. |
| 1.3.6.1.4.1.248.70.12.6.21.7.1 | RowmagnumIGMPRouterEntry | not-accessible | mandatory | IGMP Router Entry |
| 1.3.6.1.4.1.248.70.12.6.21.7.1.1 | ColumnigmpRouterIndex | read-only | mandatory | IGMP Router Index |
| 1.3.6.1.4.1.248.70.12.6.21.7.1.2 | ColumnigmpRouterAddress | read-only | mandatory | Router IP address |
| 1.3.6.1.4.1.248.70.12.6.21.7.1.3 | ColumnigmpRouterPort | read-only | mandatory | Router Port Number |
| 1.3.6.1.4.1.248.70.12.6.21.7.1.4 | ColumnigmpRouterTimer | read-only | mandatory | Router Timer |
| 1.3.6.1.4.1.248.70.12.6.21.8 | TablemagnumIGMPPortTable | not-accessible | mandatory | This table shows the IGMP Port entries. |
| 1.3.6.1.4.1.248.70.12.6.21.8.1 | RowmagnumIGMPPortEntry | not-accessible | mandatory | IGMP Port Entry |
| 1.3.6.1.4.1.248.70.12.6.21.8.1.1 | ColumnigmpPortIndex | read-only | mandatory | IGMP Router Index |
| 1.3.6.1.4.1.248.70.12.6.21.8.1.2 | ColumnigmpPortMode | read-write | mandatory | Sets the IGMP port mode. |
| 1.3.6.1.4.1.248.70.12.6.21.9 | ScalarunknownMcast | read-write | mandatory | Enable/ Disables the multicasting of unknown streams. |
| 1.3.6.1.4.1.248.70.12.6.22 | Nodesring | |||
| 1.3.6.1.4.1.248.70.12.6.22.1 | ScalarsringControl | read-write | mandatory | sring Status and Control |
| 1.3.6.1.4.1.248.70.12.6.22.2 | TablesringTable | not-accessible | mandatory | A list of sring entries. The number of entries is 12 |
| 1.3.6.1.4.1.248.70.12.6.22.2.1 | RowsringEntry | not-accessible | mandatory | A port entry containing sring details in the device. |
| 1.3.6.1.4.1.248.70.12.6.22.2.1.1 | ColumnsringIndex | read-only | mandatory | A unique value for each entry. |
| 1.3.6.1.4.1.248.70.12.6.22.2.1.2 | ColumnsringPort1 | read-write | mandatory | First Port |
| 1.3.6.1.4.1.248.70.12.6.22.2.1.3 | ColumnsringPort2 | read-write | mandatory | Second Port |
| 1.3.6.1.4.1.248.70.12.6.22.2.1.4 | ColumnsringStatus | read-only | mandatory | status of this port pair |
| 1.3.6.1.4.1.248.70.12.6.23 | Nodelll | |||
| 1.3.6.1.4.1.248.70.12.6.23.1 | ScalarlllControl | read-write | mandatory | lll Status and Control |
| 1.3.6.1.4.1.248.70.12.6.23.2 | ScalarlllPortMap | read-write | mandatory | lll PortMap |
| 1.3.6.1.4.1.248.70.12.6.24 | Nodealarm | |||
| 1.3.6.1.4.1.248.70.12.6.24.1 | ScalaralarmControl | read-write | mandatory | Alarm Status and Control |
| 1.3.6.1.4.1.248.70.12.6.24.2 | ScalaralarmWidth | read-write | mandatory | Alarm Pulse Width |
| 1.3.6.1.4.1.248.70.12.6.24.3 | TablealarmTable | not-accessible | mandatory | A list of alarm entries. The number of entries is 9 |
| 1.3.6.1.4.1.248.70.12.6.24.3.1 | RowalarmEntry | not-accessible | mandatory | Anentry containing alarm details in the device. |
| 1.3.6.1.4.1.248.70.12.6.24.3.1.1 | ColumnalarmIndex | read-only | mandatory | A unique value for each entry. |
| 1.3.6.1.4.1.248.70.12.6.24.3.1.2 | ColumnalarmEvent | read-only | mandatory | Event ID |
| 1.3.6.1.4.1.248.70.12.6.24.3.1.3 | ColumnalarmType | read-only | mandatory | Type of Alarm |
| 1.3.6.1.4.1.248.70.12.6.24.3.1.4 | ColumnalarmDesc | read-only | mandatory | Alarm Description |
| 1.3.6.1.4.1.248.70.12.6.24.3.1.5 | ColumnalarmStatus | read-write | mandatory | status of this event |
| 1.3.6.1.4.1.248.70.12.6.24.3.1.6 | ColumnalarmFlag | read-write | mandatory | historical status of the event |
| 1.3.6.1.4.1.248.70.12.6.25 | Nodedualhome | |||
| 1.3.6.1.4.1.248.70.12.6.25.1 | ScalardhControl | read-write | mandatory | dh Status and Control |
| 1.3.6.1.4.1.248.70.12.6.25.2 | ScalardhMode | read-write | mandatory | dh mode |
| 1.3.6.1.4.1.248.70.12.6.25.3 | ScalardhActive | read-only | mandatory | dh Active Port |
| 1.3.6.1.4.1.248.70.12.6.25.4 | ScalardhPort1 | read-write | mandatory | dh Port1 |
| 1.3.6.1.4.1.248.70.12.6.25.5 | ScalardhPort2 | read-write | mandatory | dh Port2 |
| 1.3.6.1.4.1.248.70.12.7 | Nodemax16 | |||
| 1.3.6.1.4.1.248.70.12.8 | Nodemax32 | |||
| 1.3.6.1.4.1.248.70.12.9 | Nodemax8 | |||
| 1.3.6.1.4.1.248.70.12.10 | Nodemax32t | |||
| 1.3.6.1.4.1.248.70.12.11 | Nodemaxq | |||
| 1.3.6.1.4.1.248.70.12.12 | Nodemx-events | |||
| 1.3.6.1.4.1.248.70.12.12.1 | Nodem6kIntruderTrap | Sent out if there is an intruder mac address being blocked by port security module | ||
| 1.3.6.1.4.1.248.70.12.12.1 | NodeuserAuthFail | |||
| 1.3.6.1.4.1.248.70.12.12.1.1 | Scalarmode | read-only | mandatory | Access Mode that failed |
| 1.3.6.1.4.1.248.70.12.12.1.2 | ScalaruserIpAddress | read-only | mandatory | Access Mode that failed |
| 1.3.6.1.4.1.248.70.12.12.2 | Nodem6kSringOpenTrap | Sent out when the SRING changes from CLOSED to OPEN state | ||
| 1.3.6.1.4.1.248.70.12.12.2 | NodepowerAlarm | |||
| 1.3.6.1.4.1.248.70.12.12.2.1 | ScalarpowerSupplyFailed | read-only | mandatory | The Power Supply that is failed |
| 1.3.6.1.4.1.248.70.12.12.3 | NodefanAlarm | |||
| 1.3.6.1.4.1.248.70.12.12.3 | Nodem6kSringClosedTrap | Sent out when the SRING changes from OPEN to CLOSED state | ||
| 1.3.6.1.4.1.248.70.12.12.3.1 | ScalarfanNumber | read-only | mandatory | Fan Number being reported |
| 1.3.6.1.4.1.248.70.12.12.3.2 | ScalarfanStatus | read-only | mandatory | Fan Status Reported |
| 1.3.6.1.4.1.248.70.12.12.4 | Nodem6kLLLTrap | Sent out when the Link Loss Learn system is triggered | ||
| 1.3.6.1.4.1.248.70.12.12.5 | Nodem6kPMPTrap | Sent out when the Point to Multipoint system is triggered | ||
| 1.3.6.1.4.1.248.70.12.12.6 | Nodem6kUserAuthFailTrap | Sent out when a login fails | ||
| 1.3.6.1.4.1.248.70.12.12.7 | Nodem6kPowerAlarmTrap | Sent out when one of the dual power supplies fail | ||
| 1.3.6.1.4.1.248.70.12.12.8 | Nodem6kSTPEnabledTrap | Sent out when STP is Enabled. | ||
| 1.3.6.1.4.1.248.70.12.12.9 | Nodem6kRSTPEnabledTrap | Sent out when RSTP is Enabled. | ||
| 1.3.6.1.4.1.248.70.12.12.10 | Nodem6kSTPDisabledTrap | Sent out when STP is Disabled. | ||
| 1.3.6.1.4.1.248.70.12.12.11 | Nodem6kRSTPDisabledTrap | Sent out when RSTP is Disabled. | ||
| 1.3.6.1.4.1.248.70.12.12.12 | Nodem6kFanAlarmTrap | Sent out when Fan Status Changes. | ||
| 1.3.6.1.4.1.248.70.12.13 | Nodemax25e | |||
| 1.3.6.1.4.1.248.70.12.14 | Nodemax32f | |||
| 1.3.6.1.4.1.248.70.12.17 | Nodemax32fc | |||
| 1.3.6.1.4.1.248.70.12.18 | Nodemaxqe | |||
| 1.3.6.1.4.1.248.70.12.19 | Nodemaxl | |||
| 1.3.6.1.4.1.248.70.12.20 | Nodemagnum10kt | |||
| 1.3.6.1.4.1.248.70.12.20 | Nodemax1000 | |||
| 1.3.6.1.4.1.248.70.12.21 | Nodemax25m | |||
| 1.3.6.1.4.1.248.70.12.21 | Nodemaxm | |||
| 1.3.6.1.4.1.248.70.12.22 | Nodemagnum10kg |