HMPRIV-MGMT-SNMP-MIB
990 objects
The Hirschmann Private MIB definitions for Platform devices.
Imported Objects
| BRIDGE-MIB | -- RFC4001 dot1dStaticAddress |
| IANA-ADDRESS-FAMILY-NUMBERS-MIB | AddressFamilyNumbers |
| IF-MIB | ifIndex InterfaceIndexOrZero |
| INET-ADDRESS-MIB | InetAddress InetAddressType |
| RMON2-MIB | TimeFilter |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-SMI | Counter32 enterprises Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-IDENTITY OBJECT-TYPE TimeTicks |
| SNMPv2-TC | DisplayString MacAddress RowStatus TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.248 | Nodehirschmann | |||
| 1.3.6.1.4.1.248.14 | IdentityhmConfiguration | The Hirschmann Private MIB definitions for Platform devices. | ||
| 1.3.6.1.4.1.248.14.1 | NodehmChassis | |||
| 1.3.6.1.4.1.248.14.1.0 | IdentityhmChassisEvent | current | The events of hmChassis. | |
| 1.3.6.1.4.1.248.14.1.0.1 | NotificationhmGroupMapChange | current | This trap is sent when a change occurs in the group structure of a switch. This occurs only when a group is logically removed from or added to a switch. The va… | |
| 1.3.6.1.4.1.248.14.1.0.2 | NotificationhmPowerSupply | current | This trap is sent if the state of a power supply unit changes. | |
| 1.3.6.1.4.1.248.14.1.0.3 | NotificationhmFan | current | This trap is sent if the value of hmFanCtrl changes. | |
| 1.3.6.1.4.1.248.14.1.0.4 | NotificationhmSignallingRelay | current | This trap is sent if the value of hmRS2SigRelayState changes its value. Variables included in this trap are hmRS2SigRelayState, hmSigTrapReason, hmSigReasonInd… | |
| 1.3.6.1.4.1.248.14.1.0.5 | NotificationhmStandby | current | This trap is sent if the value of hmRS2OperMode changes. | |
| 1.3.6.1.4.1.248.14.1.0.6 | NotificationhmSelftestError | current | This trap is sent if the value of one of the selftest results is not zero or if a value changes while the agent is running. | |
| 1.3.6.1.4.1.248.14.1.0.7 | NotificationhmModuleMapChange | current | This trap is sent when a change occurs in the module structure of a switch. This occurs only when a module is logically removed from or added to a switch. The … | |
| 1.3.6.1.4.1.248.14.1.0.8 | NotificationhmBPDUGuardTrap | current | This trap is sent if on this port an BPDU guard functionality is enabled (globally or only for this port) and an (R)STP BPDU are received on this port. That me… | |
| 1.3.6.1.4.1.248.14.1.0.10 | NotificationhmSigConRelayChange | current | This trap is sent if the value of hmSigConOperState changes its value. Variables included in this trap are hmSigConOperState, hmSigConTrapCause, hmSigConTrapCa… | |
| 1.3.6.1.4.1.248.14.1.0.11 | NotificationhmSFPChangeTrap | current | This trap is sent when a SFP has been added or removed. It is also sent for an otherwise unsupported SFP. | |
| 1.3.6.1.4.1.248.14.1.0.12 | NotificationhmIfaceUtilizationTrap | current | This trap is sent if the value of hmIfaceUtilization exceeds or falls back below the interface untilization threshholds hmIfaceUtilizationAlarmConditionThresho… | |
| 1.3.6.1.4.1.248.14.1.0.13 | NotificationhmDevMonStateChange | current | This trap is sent if the value of hmDevMonSwitchState changes its value. Variables included in this trap are hmDevMonSwitchState, hmDevMonTrapCause, hmDevMonTr… | |
| 1.3.6.1.4.1.248.14.1.0.14 | NotificationhmSFPRxPowerChangeTrap | current | This trap is sent when the state of the rx power of a SFP changes. | |
| 1.3.6.1.4.1.248.14.1.0.15 | NotificationhmSysSelftestRebootOnErrorTrap | current | This trap is sent when the agent wants to reboot due to an internal circumstance. | |
| 1.3.6.1.4.1.248.14.1.1 | NodehmSystemTable | |||
| 1.3.6.1.4.1.248.14.1.1.1 | ScalarhmSysProduct | read-only | current | Manufacturer-defined product identifier. |
| 1.3.6.1.4.1.248.14.1.1.2 | ScalarhmSysVersion | read-only | current | This value is a string that contains at least the following data : SW: Version number of software CH: Version number of chassis BP: Version number of backplane |
| 1.3.6.1.4.1.248.14.1.1.3 | ScalarhmSysGroupCapacity | read-only | current | The hmSysGroupCapacity is the number of groups that can be contained within the chassis. Within each managed chassis/switch, the groups are uniquely numbered i… |
| 1.3.6.1.4.1.248.14.1.1.4 | ScalarhmSysGroupMap | read-only | current | This string represents the current configuration of the chassis, encoded as an octet string. Each module is represented by a single octet. If the value of a si… |
| 1.3.6.1.4.1.248.14.1.1.5 | ScalarhmSysMaxPowerSupply | read-only | current | Maximum number of power supplies for this chassis. Within each managed chassis/switch, the groups are uniquely numbered in the range from 1 to hmSysMaxPowerSup… |
| 1.3.6.1.4.1.248.14.1.1.6 | ScalarhmSysMaxFan | read-only | current | Maximum number of fans for this chassis. Within each managed chassis/switch, the fans are uniquely numbered in the range from 0 to hmSysMaxFan. |
| 1.3.6.1.4.1.248.14.1.1.7 | ScalarhmSysGroupModuleCapacity | read-only | current | Maximum number of modules that an individual group can contain in this system. |
| 1.3.6.1.4.1.248.14.1.1.8 | ScalarhmSysModulePortCapacity | read-only | current | Maximum number of ports that an individual module can contain in this system. |
| 1.3.6.1.4.1.248.14.1.1.9 | TablehmSysGroupTable | not-accessible | current | This table contains variables for a closer description of a group. |
| 1.3.6.1.4.1.248.14.1.1.9.1 | RowhmSysGroupEntry | not-accessible | current | The entry of the hmSysGroupTable. |
| 1.3.6.1.4.1.248.14.1.1.9.1.1 | ColumnhmSysGroupID | read-only | current | index to identify an interface card. This value is never greater than hmSysGroupCapacity. |
| 1.3.6.1.4.1.248.14.1.1.9.1.2 | ColumnhmSysGroupType | read-only | current | Type of interface card. |
| 1.3.6.1.4.1.248.14.1.1.9.1.3 | ColumnhmSysGroupDescription | read-only | current | Description of interface card. |
| 1.3.6.1.4.1.248.14.1.1.9.1.4 | ColumnhmSysGroupHwVersion | read-only | current | Hardware version of interface card. |
| 1.3.6.1.4.1.248.14.1.1.9.1.5 | ColumnhmSysGroupSwVersion | read-only | current | Software version of interface card. |
| 1.3.6.1.4.1.248.14.1.1.9.1.6 | ColumnhmSysGroupModuleMap | read-only | current | This string represents the current configuration of a group, encoded as an octet string. Each module is represented by a single octet. If the value of a single… |
| 1.3.6.1.4.1.248.14.1.1.9.1.7 | ColumnhmSysGroupAction | read-write | current | This object, when read, always returns a value of other(1). A value of reset(2) has the same effect as a power-on sequence (coldstart). When set to resetStats(… |
| 1.3.6.1.4.1.248.14.1.1.9.1.8 | ColumnhmSysGroupActionResult | read-only | current | Result of the last activated action. A value of zero indicates that the result is ok. Bits set in the result indicate error conditions. |
| 1.3.6.1.4.1.248.14.1.1.9.1.9 | ColumnhmSysGroupIsolateMode | read-write | current | Setting this variable to enable(1) separates the group from the rest of the chassis, so that it will act like a standalone-switch. |
| 1.3.6.1.4.1.248.14.1.1.9.1.10 | ColumnhmSysGroupSerialNum | read-only | current | The serial number provided by vendor (ASCII). |
| 1.3.6.1.4.1.248.14.1.1.9.1.11 | ColumnhmSysGroupActionDelayPreset | read-write | current | Time in seconds until a reset(2) or hotRestart(10) that was triggered over the hmSysGroupAction object is executed. Writing a zero will cancel any scheduled re… |
| 1.3.6.1.4.1.248.14.1.1.9.1.12 | ColumnhmSysGroupActionDelayCurrent | read-only | current | If a delayed reset is scheduled this object will incrementing from the start value to zero. |
| 1.3.6.1.4.1.248.14.1.1.10 | TablehmSysModuleTable | not-accessible | current | This table contains variables for a closer description of a module. |
| 1.3.6.1.4.1.248.14.1.1.10.1 | RowhmSysModuleEntry | not-accessible | current | The entry of the hmSysModuleTable. |
| 1.3.6.1.4.1.248.14.1.1.10.1.1 | ColumnhmSysModGroupID | read-only | current | index to identify an interface card. This value is never greater than hmSysGroupCapacity. |
| 1.3.6.1.4.1.248.14.1.1.10.1.2 | ColumnhmSysModID | read-only | current | index to identify a module on an interface card. This value is never greater than hmSysGroupModuleCapacity. |
| 1.3.6.1.4.1.248.14.1.1.10.1.3 | ColumnhmSysModType | read-only | current | Type of a module. |
| 1.3.6.1.4.1.248.14.1.1.10.1.4 | ColumnhmSysModDescription | read-only | current | Description of the module. |
| 1.3.6.1.4.1.248.14.1.1.10.1.5 | ColumnhmSysModVersion | read-only | current | version of the module. |
| 1.3.6.1.4.1.248.14.1.1.10.1.6 | ColumnhmSysModNumOfPorts | read-only | current | The numberOfPorts is the number of ports contained within the module. Within each module, the ports are uniquely numbered in the range from 1 to numberOfPorts. |
| 1.3.6.1.4.1.248.14.1.1.10.1.7 | ColumnhmSysModFirstMauIndex | read-only | current | value of the first mauIndex used by the module. |
| 1.3.6.1.4.1.248.14.1.1.10.1.8 | ColumnhmSysModStatus | read-write | current | status of hot-pluggable modules, only for PowerMICE. If the value is physical(1), then the module is plugged in, if the value is configurable, the ports can be… |
| 1.3.6.1.4.1.248.14.1.1.10.1.9 | ColumnhmSysModSerialNum | read-only | current | The serial number provided by vendor (ASCII). |
| 1.3.6.1.4.1.248.14.1.1.10.1.10 | ColumnhmSysModAdminState | read-write | current | Enable or disable the module. If disabled, module plugged in this slot will not be activated. |
| 1.3.6.1.4.1.248.14.1.1.11 | TablehmInterfaceTable | not-accessible | current | This table contains variables for each interface of the switch. |
| 1.3.6.1.4.1.248.14.1.1.11.1 | RowhmInterfaceEntry | not-accessible | current | The entry of the hmInterfaceTable. |
| 1.3.6.1.4.1.248.14.1.1.11.1.1 | ColumnhmIfaceGroupID | read-only | current | index to identify an interface card. This value is never greater than hmSysGroupCapacity. |
| 1.3.6.1.4.1.248.14.1.1.11.1.2 | ColumnhmIfaceID | read-only | current | index to identify an interface within an interface card. |
| 1.3.6.1.4.1.248.14.1.1.11.1.3 | ColumnhmIfaceStpEnable | read-write | current | Enable or disable spanning tree protocol. |
| 1.3.6.1.4.1.248.14.1.1.11.1.4 | ColumnhmIfaceLinkType | read-write | current | Describes the link type of the interface. |
| 1.3.6.1.4.1.248.14.1.1.11.1.5 | ColumnhmIfaceAction | read-write | current | This object, when read, always returns a value of noAction(1). When set to resetStats(2), a reset of all statistic counters within this interfacecard will be f… |
| 1.3.6.1.4.1.248.14.1.1.11.1.6 | ColumnhmIfaceNextHopMacAddress | read-only | current | The macaddress of the next switch agent reachable via this interface. If the value is 0:0:0:0:0:0, no other switch is seen via this interface. |
| 1.3.6.1.4.1.248.14.1.1.11.1.7 | ColumnhmIfaceFlowControl | read-write | current | Enables or disables flow control per port |
| 1.3.6.1.4.1.248.14.1.1.11.1.8 | ColumnhmIfacePriorityThreshold | read-write | current | This object is used to support the dot1dTrafficClassTable. It defines the thresholds of the available priority-classes. Starting at MACH Release 2.20 this vari… |
| 1.3.6.1.4.1.248.14.1.1.11.1.9 | ColumnhmIfaceName | read-write | current | User configurable textual description of the interface. On devices which support Power over Ethernet (IEEE 802.af), this object is mapped to pethPsePortType of… |
| 1.3.6.1.4.1.248.14.1.1.11.1.10 | ColumnhmIfaceTrunkID | read-write | current | If the value of this variable is greater 0 then it belongs to the link aggregation instance with the same index. If the value is 0 no link aggregation uses thi… |
| 1.3.6.1.4.1.248.14.1.1.11.1.11 | ColumnhmIfacePrioTOSEnable | read-write | current | Enable or disable Priority setting from IP TOS field. |
| 1.3.6.1.4.1.248.14.1.1.11.1.12 | ColumnhmIfaceBcastLimit | read-write | current | Broadcast rate: maximum number of broadcasts to be sent on this port within one second, use 0 for no limitation. |
| 1.3.6.1.4.1.248.14.1.1.11.1.13 | ColumnhmIfaceUtilization | read-only | current | The best estimate of the mean physical layer network utilization on this interface during the last sampling interval, in hundredths of a percent. The first his… |
| 1.3.6.1.4.1.248.14.1.1.11.1.14 | ColumnhmIfaceUtilizationControlInterval | read-only | current | The interval in seconds over which the data is sampled for hmIfaceUtilization. This interval can be any number of seconds between 1 and 3600 (1 hour). The firs… |
| 1.3.6.1.4.1.248.14.1.1.11.1.15 | ColumnhmIfaceStpBpduGuardEnable | read-write | current | Enabled or disabled the BPDU guard functionality per port. If BPDU guard functionality are global enabled (hmSysStpBPDUGuardEnable=enable(1)), and BPDU guard a… |
| 1.3.6.1.4.1.248.14.1.1.11.1.16 | ColumnhmIfaceStpBpduGuardStatus | read-only | current | Advertised the state of BPDU guard functionality for this port. If BPDU guard functionality fot this port is disabled or guard functionality is enabled, but no… |
| 1.3.6.1.4.1.248.14.1.1.11.1.17 | ColumnhmIfaceCapability | read-only | current | Capability of the interface coded as an integer value with each bit representing a special capability. Meaning of the bits: Bit 0: cabletest capability Bit 1: … |
| 1.3.6.1.4.1.248.14.1.1.11.1.18 | ColumnhmIfaceIngressLimiterMode | read-write | current | The ingress limiter can work in different modes. Mode all limits the complete ingress traffic. Mode bc limits only the ingress broadcast traffic. Mode bc_mc li… |
| 1.3.6.1.4.1.248.14.1.1.11.1.19 | ColumnhmIfaceIngressLimiterCalculationMode | read-write | current | The ingress limiter can measure the traffic on a bytes per second or on a packets per second basis. The limiter calculation mode is hardware dependend. Not all… |
| 1.3.6.1.4.1.248.14.1.1.11.1.20 | ColumnhmIfaceIngressLimiterRate | read-write | current | The rate of the ingress limiter. The value 0 disables the limiter. |
| 1.3.6.1.4.1.248.14.1.1.11.1.21 | ColumnhmIfaceEgressLimiterMode | read-write | current | The egress limiter can work in different modes. Mode all limits the complete egress traffic. Mode bc limits only the egress broadcast traffic. Mode bc_mc limit… |
| 1.3.6.1.4.1.248.14.1.1.11.1.22 | ColumnhmIfaceEgressLimiterCalculationMode | read-write | current | The egress limiter can measure the traffic on a bytes per second or on a packets per second basis. The limiter calculation mode is hardware dependend. Not all … |
| 1.3.6.1.4.1.248.14.1.1.11.1.23 | ColumnhmIfaceEgressLimiterRate | read-write | current | The rate of the egress limiter. The value 0 disables the limiter. |
| 1.3.6.1.4.1.248.14.1.1.11.1.24 | ColumnhmIfaceUtilizationAlarmUpperThreshold | read-write | current | Surveys the interface utilization hmIfaceUtilization and generates an alarm for this interfaces, if the given limit is exceeded. A value of 0 disables the alar… |
| 1.3.6.1.4.1.248.14.1.1.11.1.25 | ColumnhmIfaceUtilizationAlarmLowerThreshold | read-write | current | Surveys the interface utilization hmInfaceUtilization and removes the alarm condition for this interfaces, if the utilization value is below the given limit. A… |
| 1.3.6.1.4.1.248.14.1.1.11.1.26 | ColumnhmIfaceUtilizationAlarmCondition | read-only | current | The alarm condition is given (true), if the given hmIfaceUtilizationAlarmUpperThreshold limit is exceeded by the interface utilization. The alarm condition wil… |
| 1.3.6.1.4.1.248.14.1.1.11.1.27 | ColumnhmIfaceCableCrossing | read-write | current | This variable configures the cable crossing on twisted pair cables. When set to 'enable', the port uses the crossover mode. When set to 'disable', the port doe… |
| 1.3.6.1.4.1.248.14.1.1.11.1.28 | ColumnhmIfacePhyFastLinkDetection | read-write | current | This variable configures the PHY specific fast link detection feature on this port. 'Unsupported' is shown, if a port does not support this feature. It is not … |
| 1.3.6.1.4.1.248.14.1.1.11.1.29 | ColumnhmIfaceAcceptableFrameTypes | read-write | obsolete | This object is 'obsolete' and is replaced by hmIfaceExtAcceptableFrameTypes. When this is admitOnlyVlanTagged(2) the device will discard untagged frames receiv… |
| 1.3.6.1.4.1.248.14.1.1.12 | TablehmTrunkTable | not-accessible | current | This table contains variables for each trunk of the switch. |
| 1.3.6.1.4.1.248.14.1.1.12.1 | RowhmTrunkEntry | not-accessible | current | The entry of the hmTrunkTable. |
| 1.3.6.1.4.1.248.14.1.1.12.1.1 | ColumnhmTrunkID | read-only | current | Index to identify a link aggregation instance |
| 1.3.6.1.4.1.248.14.1.1.12.1.2 | ColumnhmTrunkInterfaces | read-only | current | List of interfaces which are aggregated in the trunk. each octet pair contains the slotID and interfaceID. Interfaces are added or deleteted using the variable… |
| 1.3.6.1.4.1.248.14.1.1.12.1.3 | ColumnhmTrunkName | read-write | current | Textual description of the trunk |
| 1.3.6.1.4.1.248.14.1.1.12.1.4 | ColumnhmTrunkAction | read-write | current | action according to hmIfaceAction which is performed for all interfaces in the trunk |
| 1.3.6.1.4.1.248.14.1.1.12.1.5 | ColumnhmTrunkAdminStatus | read-write | current | The desired state of the trunk. if this variable is set to down(2), all interfaces which are aggregated in the trunk are switched off simultaneously. Reading t… |
| 1.3.6.1.4.1.248.14.1.1.12.1.6 | ColumnhmTrunkOperStatus | read-only | current | The operational state of the trunk. Reading this variable returns up(1) if at least one interface of the trunk is operational (up). |
| 1.3.6.1.4.1.248.14.1.1.12.1.7 | ColumnhmTrunkLastChange | read-only | current | Time since system boot when there was a change in either the operational state of the trunk or the list of aggregated interfaces. |
| 1.3.6.1.4.1.248.14.1.1.13 | TablehmSFPTable | not-accessible | current | This table contains variables for each SFP. |
| 1.3.6.1.4.1.248.14.1.1.13.1 | RowhmSFPEntry | not-accessible | current | Entry for a detected SFP. |
| 1.3.6.1.4.1.248.14.1.1.13.1.1 | ColumnhmSfpGroupID | not-accessible | current | Index to identify a module. This value is never greater than hmSysGroupModuleCapacity. |
| 1.3.6.1.4.1.248.14.1.1.13.1.2 | ColumnhmSfpID | not-accessible | current | Index to identify an interface within a module. This value is never greater than hmSysModulePortCapacity. |
| 1.3.6.1.4.1.248.14.1.1.13.1.3 | ColumnhmSfpConnector | read-only | current | The SFP's Connector Type. |
| 1.3.6.1.4.1.248.14.1.1.13.1.4 | ColumnhmSfpTransceiver | read-only | current | The SFP's Transceiver type. |
| 1.3.6.1.4.1.248.14.1.1.13.1.5 | ColumnhmSfpVendorOUI | read-only | current | The SFP's vendor IEEE company ID (OUI). |
| 1.3.6.1.4.1.248.14.1.1.13.1.6 | ColumnhmSfpVendorName | read-only | current | The SFP's vendor name (ASCII). |
| 1.3.6.1.4.1.248.14.1.1.13.1.7 | ColumnhmSfpPartNumber | read-only | current | The SFP's part description number (ASCII). |
| 1.3.6.1.4.1.248.14.1.1.13.1.8 | ColumnhmSfpPartRev | read-only | current | The SFP's part revision number (ASCII). |
| 1.3.6.1.4.1.248.14.1.1.13.1.9 | ColumnhmSfpSerialNum | read-only | current | The SFP's serial number provided by vendor (ASCII). |
| 1.3.6.1.4.1.248.14.1.1.13.1.10 | ColumnhmSfpDateCode | read-only | current | The SFP's vendor manufacturing date code. Format is YY:MM:DD. |
| 1.3.6.1.4.1.248.14.1.1.13.1.11 | ColumnhmSfpBitRate | read-only | current | The SFP's nominal bitrate in units of MBits/sec. Contains -1 in case of a device read error. |
| 1.3.6.1.4.1.248.14.1.1.13.1.12 | ColumnhmSfpTemperature | read-only | current | This signed integer is used to identify the temperature within the SFP in units of centigrade (celsius). Contains -1000 in case of a device read error. |
| 1.3.6.1.4.1.248.14.1.1.13.1.13 | ColumnhmSfpTxPower | read-only | current | The SFP's internally measured Tx Power in units of milliWatts. (ASCII representation of floating point number). |
| 1.3.6.1.4.1.248.14.1.1.13.1.14 | ColumnhmSfpRxPower | read-only | current | The SFP's internally measured Rx Power in units of milliWatts. (ASCII representation of floating point number). |
| 1.3.6.1.4.1.248.14.1.1.13.1.15 | ColumnhmSfpTxPowerInt | read-only | current | The SFP's internally measured Tx Power in units of 1/10 microWatts. |
| 1.3.6.1.4.1.248.14.1.1.13.1.16 | ColumnhmSfpRxPowerInt | read-only | current | The SFP's internally measured Rx Power in units of 1/10 microWatts. |
| 1.3.6.1.4.1.248.14.1.1.13.1.17 | ColumnhmSfpRxPowerState | read-only | current | The state of the SFP's internally measured Rx. |
| 1.3.6.1.4.1.248.14.1.1.13.1.20 | ColumnhmSfpInfoVersion | read-only | current | Version of SFP's Hirschmann Information. Contains -1 in case of a device read error. |
| 1.3.6.1.4.1.248.14.1.1.13.1.21 | ColumnhmSfpInfoPartNumber | read-only | current | Part Number of SFP's Hirschmann Information. |
| 1.3.6.1.4.1.248.14.1.1.13.1.22 | ColumnhmSfpInfoPartId | read-only | current | Part Identifier of SFP's Hirschmann Information. |
| 1.3.6.1.4.1.248.14.1.1.13.1.23 | ColumnhmSfpInfoMagic | read-only | current | 1, if SFP contains vendor specific information by Hirschmann, otherwise 0. |
| 1.3.6.1.4.1.248.14.1.1.13.1.24 | ColumnhmSfpSupported | read-only | current | Indicates if the local agent supports this SFP. |
| 1.3.6.1.4.1.248.14.1.1.13.1.30 | ColumnhmSfpMaxLength-fiber-9 | read-only | current | Max. usable length for the cable type '9/125 micrometer fiber' with this SFP in units of meters. |
| 1.3.6.1.4.1.248.14.1.1.13.1.31 | ColumnhmSfpMaxLength-fiber-50 | read-only | current | Max. usable length for the cable type '50/125 micrometer fiber' with this SFP in units of meters. |
| 1.3.6.1.4.1.248.14.1.1.13.1.32 | ColumnhmSfpMaxLength-fiber-62-5 | read-only | current | Max. usable length for the cable type '62.5/125 micrometer fiber' with this SFP in units of meters. |
| 1.3.6.1.4.1.248.14.1.1.13.1.33 | ColumnhmSfpMaxLength-copper | read-only | current | Max. usable length for the cable type 'copper' with this SFP in units of meters. |
| 1.3.6.1.4.1.248.14.1.1.13.1.34 | ColumnhmSfpTxPowerdBm | read-only | current | The SFP's internally measured Tx Power in units of dBm. (ASCII representation of floating point number). |
| 1.3.6.1.4.1.248.14.1.1.13.1.35 | ColumnhmSfpRxPowerdBm | read-only | current | The SFP's internally measured Rx Power in units of dBm. (ASCII representation of floating point number). |
| 1.3.6.1.4.1.248.14.1.1.19 | ScalarhmSysBootVersion | read-only | current | This value is a string that contains the version of the Bootcode |
| 1.3.6.1.4.1.248.14.1.1.20 | ScalarhmSysChassisName | read-write | current | This displaystring represents the name of the Chassis. Any change of this variable will cause an automatically update of this value on each Basic Board in this… |
| 1.3.6.1.4.1.248.14.1.1.21 | ScalarhmSysStpEnable | read-write | current | This variable controls the STP operation of the entire switch. To control the STP function of each port use hmIfaceStpEnable |
| 1.3.6.1.4.1.248.14.1.1.22 | ScalarhmSysFlowControl | read-write | current | enables or disables flow control for the switch unit. |
| 1.3.6.1.4.1.248.14.1.1.23 | ScalarhmSysBOOTPEnable | read-write | current | Enable/Disable BOOTP operation. A (1) enables, a (2) disables. When disabled, no BOOTPs are transmitted by the system. When enabled, the system sends BOOTP req… |
| 1.3.6.1.4.1.248.14.1.1.24 | ScalarhmSysDHCPEnable | read-write | current | Enable/Disable DHCP operation. A (1) enables, a (2) disables. When disabled, no DHCPs are transmitted by the system. When enabled, the system sends DHCP reques… |
| 1.3.6.1.4.1.248.14.1.1.25 | ScalarhmSysTelnetEnable | read-write | current | Enable/Disable Telnet operation. A (1) enables, a (2) disables. When disabled, no Telnet sessions are allowed by the system. |
| 1.3.6.1.4.1.248.14.1.1.26 | ScalarhmSysHTTPEnable | read-write | current | Enable/Disable HTTP connection. A (1) enables, a (2) disables. When disabled, no HTTP is allowed by the system. |
| 1.3.6.1.4.1.248.14.1.1.27 | ScalarhmSysPlugAndPlay | read-write | current | Enable/Disable Plug&Play feature. A (1) enables, a (2) disables. if this variable is set to enable(1), special Plug&Play actions are performed at boot time and… |
| 1.3.6.1.4.1.248.14.1.1.29 | ScalarhmBcastLimiterMode | read-write | current | Global configuration of feature broadcast limiter. If enabled, for each port the maximum rate of broadcasts can be specified. |
| 1.3.6.1.4.1.248.14.1.1.30 | ScalarhmSystemTime | read-write | current | Time measured in seconds since 00:00:00 UTC, January 1, 1970. The clock of the agents may be set using this variable. Changing this variable on one agent autom… |
| 1.3.6.1.4.1.248.14.1.1.31 | ScalarhmSystemTimeSource | read-only | current | Shows the source of the system time. |
| 1.3.6.1.4.1.248.14.1.1.32 | ScalarhmSysStpBPDUGuardEnable | read-write | current | This variable controls the BPDU Guard operation of the entire switch (globally). To control the BPDU Guard function of each port use hmIfaceStpBpduGuardEnable.… |
| 1.3.6.1.4.1.248.14.1.1.33 | ScalarhmSysSTPErrorNumber | read-only | current | Advertised the reason why (R)STP could not be switched on. Error reasons are coded as OR operation bit by bit, see values: 0x00 - no errors - (R)STP is switche… |
| 1.3.6.1.4.1.248.14.1.1.34 | ScalarhmSysSoftwareCapability | read-only | current | This variable shows the capability of the running software. The string is formated as follow: Byte 1 : Always L (for Layer) Byte 2 : 2 or 3 (dependend if the s… |
| 1.3.6.1.4.1.248.14.1.1.35 | NodehmLEDGroup | |||
| 1.3.6.1.4.1.248.14.1.1.35.1 | NodehmLEDRSGroup | |||
| 1.3.6.1.4.1.248.14.1.1.35.1.1 | ScalarhmLEDRSPowerSupply | read-only | current | Status from the PowerSupply LED. |
| 1.3.6.1.4.1.248.14.1.1.35.1.2 | ScalarhmLEDRStandby | read-only | current | Status from the Standby LED. |
| 1.3.6.1.4.1.248.14.1.1.35.1.3 | ScalarhmLEDRSRedundancyManager | read-only | current | Status from the RM LED. |
| 1.3.6.1.4.1.248.14.1.1.35.1.4 | ScalarhmLEDRSFault | read-only | current | Status from the Fault LED. |
| 1.3.6.1.4.1.248.14.1.1.35.2 | NodehmLEDOctGroup | |||
| 1.3.6.1.4.1.248.14.1.1.35.2.1 | ScalarhmLEDOctPowerSupply1 | read-only | current | Status from the PowerSupply 1 LED. |
| 1.3.6.1.4.1.248.14.1.1.35.2.2 | ScalarhmLEDOctPowerSupply2 | read-only | current | Status from the PowerSupply 2 LED. |
| 1.3.6.1.4.1.248.14.1.1.35.2.3 | ScalarhmLEDOctRedundancyManager | read-only | current | Status from the RM LED. |
| 1.3.6.1.4.1.248.14.1.1.35.2.4 | ScalarhmLEDOctFault | read-only | current | Status from the Fault LED. |
| 1.3.6.1.4.1.248.14.1.1.35.3 | NodehmLEDRSRGroup | |||
| 1.3.6.1.4.1.248.14.1.1.35.3.1 | ScalarhmLEDRSRPowerSupply | read-only | current | Status from the PowerSupply LED. |
| 1.3.6.1.4.1.248.14.1.1.35.3.2 | ScalarhmLEDRSRStandby | read-only | current | Status from the Standby LED. |
| 1.3.6.1.4.1.248.14.1.1.35.3.3 | ScalarhmLEDRSRRedundancyManager | read-only | current | Status from the RM LED. |
| 1.3.6.1.4.1.248.14.1.1.35.3.4 | ScalarhmLEDRSRFault | read-only | current | Status from the Fault LED. |
| 1.3.6.1.4.1.248.14.1.1.35.3.5 | ScalarhmLEDRSRRelay1 | read-only | current | Status from the Relay1 LED. |
| 1.3.6.1.4.1.248.14.1.1.35.3.6 | ScalarhmLEDRSRRelay2 | read-only | current | Status from the Relay2 LED. |
| 1.3.6.1.4.1.248.14.1.1.35.4 | NodehmLEDMarGroup | |||
| 1.3.6.1.4.1.248.14.1.1.35.4.1 | ScalarhmLEDMarPowerSupply | read-only | current | Status from the PowerSupply LED. |
| 1.3.6.1.4.1.248.14.1.1.35.4.2 | ScalarhmLEDMarStandby | read-only | current | Status from the Standby LED. |
| 1.3.6.1.4.1.248.14.1.1.35.4.3 | ScalarhmLEDMarRedundancyManager | read-only | current | Status from the RM LED. |
| 1.3.6.1.4.1.248.14.1.1.35.4.4 | ScalarhmLEDMarFault | read-only | current | Status from the Fault LED. |
| 1.3.6.1.4.1.248.14.1.1.35.4.5 | ScalarhmLEDMarRelay1 | read-only | current | Status from the Relay1 LED. |
| 1.3.6.1.4.1.248.14.1.1.35.4.6 | ScalarhmLEDMarRelay2 | read-only | current | Status from the Relay2 LED. |
| 1.3.6.1.4.1.248.14.1.1.36 | NodehmDIPSwitchGroup | |||
| 1.3.6.1.4.1.248.14.1.1.36.1 | NodehmDIPSwitchRSGroup | |||
| 1.3.6.1.4.1.248.14.1.1.36.1.1 | ScalarhmDIPSwitchRSRedundancyManager | read-only | current | Status from redundancy manager DIP switch. |
| 1.3.6.1.4.1.248.14.1.1.36.1.2 | ScalarhmDIPSwitchRSStandby | read-only | current | Status from Standby DIP switch. |
| 1.3.6.1.4.1.248.14.1.1.36.2 | NodehmDIPSwitchMICEGroup | |||
| 1.3.6.1.4.1.248.14.1.1.36.2.1 | ScalarhmDIPSwitchMICERedundancyManager | read-only | current | Status from redundancy manager DIP switch. |
| 1.3.6.1.4.1.248.14.1.1.36.2.2 | ScalarhmDIPSwitchMICERingPort | read-only | current | Status from ring ports DIP switch. on (1) indicates port 1 on module 1 and port 1 on module 2 are used as ring ports. off (2) indicates port 1 and 2 on module … |
| 1.3.6.1.4.1.248.14.1.1.36.2.3 | ScalarhmDIPSwitchMICEStandby | read-only | current | Status from Standby DIP switch. |
| 1.3.6.1.4.1.248.14.1.1.36.2.4 | ScalarhmDIPSwitchMICEConfig | read-only | current | Status from DIP switch configuration. on (1) indicates DIP switch configuration is enabled. off (2) indicates DIP switch configuration is disabled. |
| 1.3.6.1.4.1.248.14.1.1.36.10 | ScalarhmDIPSwitchAdminState | read-write | current | Enable or Disable the DIP switch configuration. If set to disable DIP switches are ignored. |
| 1.3.6.1.4.1.248.14.1.1.36.11 | ScalarhmDIPSwitchConflict | read-only | current | TRUE if hmDIPSwitchAdminState is set to disable and hardware DIP switch setting is enabled. |
| 1.3.6.1.4.1.248.14.1.1.37 | ScalarhmSysMaxTrunks | read-only | current | Maximum number of trunks for this chassis. |
| 1.3.6.1.4.1.248.14.1.1.38 | NodehmLimiterGroup | |||
| 1.3.6.1.4.1.248.14.1.1.38.1 | NodehmIngressLimiterGroup | |||
| 1.3.6.1.4.1.248.14.1.1.38.1.1 | ScalarhmIngressLimiterEnable | read-write | current | The global ingress limiter can be enabled or disabled. |
| 1.3.6.1.4.1.248.14.1.1.38.1.2 | ScalarhmIngressLimiterMode | read-write | current | The global ingress limiter can work in different modes. Mode all limits the complete ingress traffic. Mode bc limits only the ingress broadcast traffic. Mode b… |
| 1.3.6.1.4.1.248.14.1.1.38.1.3 | NodehmIngressUnknUcLimiterGroup | |||
| 1.3.6.1.4.1.248.14.1.1.38.1.3.1 | ScalarhmIngressUnknUcLimiterMode | read-write | current | The global unknown unicast ingress limiter can be enabled or disabled. The limiter is hardware dependend. |
| 1.3.6.1.4.1.248.14.1.1.38.1.3.2 | ScalarhmIngressUnknUcLimiterCalculationMode | read-write | current | The global unknown unicast ingress limiter can measure the traffic on a bytes per second or on a packets per second basis. The limiter calculation mode is hard… |
| 1.3.6.1.4.1.248.14.1.1.38.1.3.3 | ScalarhmIngressUnknUcLimiterRate | read-write | current | The rate of the global unknown unicast ingress limiter. The value 0 disables the limiter. |
| 1.3.6.1.4.1.248.14.1.1.38.2 | NodehmEgressLimiterGroup | |||
| 1.3.6.1.4.1.248.14.1.1.38.2.1 | ScalarhmEgressLimiterEnable | read-write | current | The global egress limiter can be enabled or disabled. |
| 1.3.6.1.4.1.248.14.1.1.39 | NodehmSysUSBGroup | |||
| 1.3.6.1.4.1.248.14.1.1.39.1 | ScalarhmSysMaxUSBPorts | read-only | current | Maximum number of USB ports in this chassis. |
| 1.3.6.1.4.1.248.14.1.1.40 | NodehmSysSwitchGroup | |||
| 1.3.6.1.4.1.248.14.1.1.40.1 | ScalarhmSysSwitchLearning | read-write | current | Controls address learning by the switch. When disabled the address database of the switch will not be updated with dynamic filtering entries. Static Filtering … |
| 1.3.6.1.4.1.248.14.1.1.40.2 | ScalarhmSysSwitchMRU | read-write | current | The Maximum Receive Unit MRU that can be received by the switch. |
| 1.3.6.1.4.1.248.14.1.1.40.3 | ScalarhmSysSwitchFastLinkDetection | read-write | current | Controls if the fast link detection is enabled or not. |
| 1.3.6.1.4.1.248.14.1.1.40.4 | ScalarhmSysSwitchAddressRelearnDetection | read-write | current | Controls if detection of address relearns is enabled or not. |
| 1.3.6.1.4.1.248.14.1.1.40.5 | ScalarhmSysSwitchAddressRelearnThreshold | read-write | current | The value of relearnd addresses to signal address relearn threshold exceeded. |
| 1.3.6.1.4.1.248.14.1.1.40.6 | ScalarhmSysSwitchDuplexMismatchDetection | read-write | current | Controls if duplex mismatch detection is enabled or not. |
| 1.3.6.1.4.1.248.14.1.1.40.7 | ScalarhmSysSwitchFDBFullCounter | read-only | current | The number of FDB Full indications that the agent has detected since reboot. |
| 1.3.6.1.4.1.248.14.1.1.40.8 | ScalarhmSysSwitchFDBHashOptimizingMode | read-write | current | Mode to optimize the MAC address table hashing algorithm. Which modes can be configured is hardware dependend. After configuration a reboot is needed. |
| 1.3.6.1.4.1.248.14.1.1.40.9 | ScalarhmSysSwitchFDBHashOptimizingStatus | read-only | current | Shows the current hash mode of this device. |
| 1.3.6.1.4.1.248.14.1.1.40.10 | NodehmSysSwitchVLANGroup | |||
| 1.3.6.1.4.1.248.14.1.1.40.10.1 | ScalarhmSysSwitchVLANLearningMode | read-write | current | Controls the VLAN learning mode by the switch. When set to IVL Independend VLAN Learning is active. When set to SVL Shared VLAN Learning is active. After setti… |
| 1.3.6.1.4.1.248.14.1.1.40.10.2 | ScalarhmSysSwitchVLANLearningStatus | read-only | current | Shows the current VLAN learning mode. When set to IVL Independend VLAN Learning is active. When set to SVL Shared VLAN Learning is active. |
| 1.3.6.1.4.1.248.14.1.1.40.11 | NodehmSysSwitchServiceModeGroup | |||
| 1.3.6.1.4.1.248.14.1.1.40.11.1 | ScalarhmSysSwitchServiceMode | read-write | current | Enables the service mode. If enabled, the switch can be separated into two switching areas with the redundant power supply. The two HIPER Ring ports are in are… |
| 1.3.6.1.4.1.248.14.1.1.40.11.2 | ScalarhmSysSwitchServiceVlan | read-write | current | Defined the Vlan for the service mode. The Vlan must be a valid Vlan and neither Vlan 0 (mgmt vlan) nor Vlan 1 (Default Vlan). |
| 1.3.6.1.4.1.248.14.1.1.40.11.3 | ScalarhmSysSwitchServiceModeOperState | read-only | current | If enabled, the switch has been separated into two switching areas with the redundant power supply. The two HIPER Ring ports are in area one. The other ports a… |
| 1.3.6.1.4.1.248.14.1.1.40.20 | NodehmSysSwitchRedundancyGroup | |||
| 1.3.6.1.4.1.248.14.1.1.40.20.1 | ScalarhmSysSwitchRedundancyRstpMrpMode | read-write | current | Rstp Mrp is enabled if this object is set to enable(1). Rstp Mrp is disabled if this object is set to disable(2). |
| 1.3.6.1.4.1.248.14.1.1.40.20.2 | ScalarhmSysSwitchRedundancyRstpMrpConfigError | read-only | current | This object indicates a Rstp Mrp fail configuration if the value true is shown. |
| 1.3.6.1.4.1.248.14.1.1.40.20.3 | ScalarhmSysSwitchRedundancyRstpMrpConfigErrorBridge | read-only | current | The identifier of the device which has a Rstp Mrp fail configuration or Null if there is no fail configuration. |
| 1.3.6.1.4.1.248.14.1.1.41 | NodehmSysSelftestGroup | |||
| 1.3.6.1.4.1.248.14.1.1.41.1 | ScalarhmSysSelftestRAM | read-write | current | Controls RAM selftest on coldstart of the device. When disabled the device booting time is reduced. |
| 1.3.6.1.4.1.248.14.1.1.41.2 | ScalarhmSysSelftestRebootOnError | read-write | current | If enabled the software does make a reboot if there is a serious error detected. |
| 1.3.6.1.4.1.248.14.1.1.41.3 | ScalarhmSysSelftestMMUStatus | read-only | current | Status of the memory managment unit. |
| 1.3.6.1.4.1.248.14.1.1.41.4 | ScalarhmSysSelftestRebootOnHdxError | read-write | current | If enabled the software does a reboot if there is a Half duplex mismatch error is detected. The option depends on hmSysSelftestRebootOnError. |
| 1.3.6.1.4.1.248.14.1.1.41.5 | ScalarhmSysSelftestSysMon | read-write | current | Enable or disable the System Monitor access during the boot phase. Please note: If the System Monitor is disabled, it is possible to lose access to the device … |
| 1.3.6.1.4.1.248.14.1.1.42 | NodehmSysOEMGroup | |||
| 1.3.6.1.4.1.248.14.1.1.42.1 | ScalarhmSysOEMID | read-only | current | Unique OEM ID. |
| 1.3.6.1.4.1.248.14.1.1.43 | ScalarhmSysMaxSignalContacts | read-only | current | Maximum number of signal contacts for this chassis. Within each managed chassis/switch, the groups are uniquely numbered in the range from 1 to hmSysMaxSignalC… |
| 1.3.6.1.4.1.248.14.1.1.44 | ScalarhmSysHttpsEnable | read-write | current | Enables/Disables HTTPS access to the device. A (1) enables, a (2) disables. |
| 1.3.6.1.4.1.248.14.1.1.45 | ScalarhmSysHttpsPortNumber | read-write | current | The port number of the HTTPS web server. |
| 1.3.6.1.4.1.248.14.1.1.46 | ScalarhmSysSkipAcaOnBoot | read-write | current | Enable/disable loading from ACA on startup. |
| 1.3.6.1.4.1.248.14.1.1.47 | ScalarhmSysConsoleServiceShellAdminState | read-write | current | Admin State of service shell. (1=enable, 2=disable). |
| 1.3.6.1.4.1.248.14.1.1.48 | ScalarhmSysHttpsCertFingerPrintType | read-write | current | Controls HTTPS certificate fingerprint generation. If set to 'sha1' hmSysHttpsCertFingerPrint will show the SHA1 fingerprint of the certificate. |
| 1.3.6.1.4.1.248.14.1.1.49 | ScalarhmSysHttpsCertFingerPrint | read-only | current | The HTTPS certificate fingerprint as hash. The type of the hash is defined with hmSysHttpsCertFingerPrintType. |
| 1.3.6.1.4.1.248.14.1.1.100 | TablehmInterfaceExtTable | not-accessible | current | This table contains variables for each interface of the switch. |
| 1.3.6.1.4.1.248.14.1.1.100.1 | RowhmInterfaceExtEntry | not-accessible | current | The entry of the hmInterfaceExtTable. |
| 1.3.6.1.4.1.248.14.1.1.100.1.1 | ColumnhmIfaceExtAcceptableFrameTypes | read-write | current | When this is admitOnlyVlanTagged(2) the device will discard untagged frames received on this port. When admitOnlyUntagged(3), the device will discard any frame… |
| 1.3.6.1.4.1.248.14.1.2 | TablehmPSTable | not-accessible | current | This table contains all variables related to the power supply units of the chassis/switch. For each power supply slot exists one instance. |
| 1.3.6.1.4.1.248.14.1.2.1 | RowhmPSEntry | not-accessible | current | The entry of the hmPSTable. |
| 1.3.6.1.4.1.248.14.1.2.1.1 | ColumnhmPSSysID | read-only | current | The value of SysID is assigned so as to uniquely identify a chassis/switch among the subordinate managed objects of the system. |
| 1.3.6.1.4.1.248.14.1.2.1.2 | ColumnhmPSID | read-only | current | This Index is used to identify the associated power supply unit. |
| 1.3.6.1.4.1.248.14.1.2.1.3 | ColumnhmPSState | read-only | current | Indicates the operational state of the associated power supply. If the value of this variable changes, a hmPowerSupply trap is sent. |
| 1.3.6.1.4.1.248.14.1.2.1.4 | ColumnhmPSType | read-only | current | Type of the associated power supply. |
| 1.3.6.1.4.1.248.14.1.2.1.5 | ColumnhmPSVersion | read-only | current | Version of the associated power supply. |
| 1.3.6.1.4.1.248.14.1.2.1.6 | ColumnhmPSDescription | read-only | current | Description of the associated power supply. |
| 1.3.6.1.4.1.248.14.1.2.1.7 | ColumnhmPSSerialNumber | read-only | current | Serial number of the associated power supply. |
| 1.3.6.1.4.1.248.14.1.2.1.8 | ColumnhmPSProductCode | read-only | current | Product code of the associated power supply. |
| 1.3.6.1.4.1.248.14.1.2.1.9 | ColumnhmPSPowerBudget | read-only | current | Power budget of the associated power supply. |
| 1.3.6.1.4.1.248.14.1.3 | TablehmFanTable | not-accessible | current | This table contains all variables related to the fan units of the chassis/switch. For each fan slot exists one instance. |
| 1.3.6.1.4.1.248.14.1.3.1 | RowhmFanEntry | not-accessible | current | The entry of the hmFanTable. |
| 1.3.6.1.4.1.248.14.1.3.1.1 | ColumnhmFanSysID | read-only | current | The value of SysID is assigned so as to uniquely identify a chassis among the subordinate managed objects of the system. |
| 1.3.6.1.4.1.248.14.1.3.1.2 | ColumnhmFanID | read-only | current | This Index is used to identify the associated fan. |
| 1.3.6.1.4.1.248.14.1.3.1.3 | ColumnhmFanState | read-only | current | Indicates the operational state of the associated fan. |
| 1.3.6.1.4.1.248.14.1.4 | NodehmFwdPriorityConfiguration | |||
| 1.3.6.1.4.1.248.14.1.4.1 | ScalarhmPrioTOSEnable | read-write | current | Global configuration of feature IP-TOS priority to 802.1D-1998 priority. If enabled, the priority of the TOS field is mapped to 802.1D priority |
| 1.3.6.1.4.1.248.14.1.4.2 | ScalarhmPrioMACAddressEnable | read-write | current | Global configuration of feature priority by MAC address. If enabled, for each static MAC address a priority could be specified |
| 1.3.6.1.4.1.248.14.1.4.3 | ScalarhmPrioVlan0TagTransparentMode | read-write | current | enables or disables the transparent mode for priority tagged frames (frames with VLAN-ID 0) for the switch unit. |
| 1.3.6.1.4.1.248.14.1.4.10 | TablehmPrioMACAddressTable | not-accessible | current | Table for assigning priority to MAC addresses |
| 1.3.6.1.4.1.248.14.1.4.10.1 | RowhmPrioMACAddressEntry | not-accessible | current | The entry of the hmPrioMACAddressTable. |
| 1.3.6.1.4.1.248.14.1.4.10.1.1 | ColumnhmPrioMACAddress | read-only | current | same as dot1dStaticAddress |
| 1.3.6.1.4.1.248.14.1.4.10.1.2 | ColumnhmPrioMACReceivePort | read-only | current | to be compatible with dot1dStaticTable |
| 1.3.6.1.4.1.248.14.1.4.10.1.3 | ColumnhmPrioMACPriority | read-write | current | priority value for the frame with the specific destination MAC address. 0..7: priority 8 : disabled (no priority by MAC address) 9 : discard the frame |
| 1.3.6.1.4.1.248.14.1.4.10.1.4 | ColumnhmPrioMACStatus | read-write | current | status flag according to dot1dStaticStatus |
| 1.3.6.1.4.1.248.14.1.4.11 | TablehmPrioTrafficClassTable | not-accessible | current | Translation table for traffic classes to 802.1D-1998 priority |
| 1.3.6.1.4.1.248.14.1.4.11.1 | RowhmPrioTrafficClassEntry | not-accessible | current | The entry of the hmPrioTrafficClassTable. |
| 1.3.6.1.4.1.248.14.1.4.11.1.1 | ColumnhmPrioTrafficClassID | read-only | current | This index is used to identify the associated traffic class |
| 1.3.6.1.4.1.248.14.1.4.11.1.2 | ColumnhmPrioTrafficClassWeight | read-write | current | With this parameter the queue mode of each traffic class can be set. 2..99: weight for WFQ (Weighted-Fair-Queuing) 100: strict priority |
| 1.3.6.1.4.1.248.14.1.4.12 | TablehmPrioTosToPrioTable | not-accessible | current | Translation table IP-TOS priority to 802.1D-1998 priority |
| 1.3.6.1.4.1.248.14.1.4.12.1 | RowhmPrioTosToPrioEntry | not-accessible | current | The entry of the hmPrioTosToPrioEntry. |
| 1.3.6.1.4.1.248.14.1.4.12.1.1 | ColumnhmPrioTTPTos | read-only | current | This index is used to identify the associated TOS value |
| 1.3.6.1.4.1.248.14.1.4.12.1.2 | ColumnhmPrioTTPPrio | read-only | current | This index is used to identify the associated 802.1D priority |
| 1.3.6.1.4.1.248.14.1.5 | TablehmCurrentAddressTable | not-accessible | current | A table containing filtering information configured into the bridge by (local or network) management or dynamic by GMRP or IGMP Snooping specifying the set of … |
| 1.3.6.1.4.1.248.14.1.5.1 | RowhmCurrentAddressEntry | not-accessible | current | Filtering information configured into the bridge by (local or network) management specifying the set of ports to which frames received from a specific port and… |
| 1.3.6.1.4.1.248.14.1.5.1.1 | ColumnhmCurrentAddress | read-only | current | The destination MAC address in a frame to which this entry's filtering information applies. This object can take the value of a unicast address, a group addres… |
| 1.3.6.1.4.1.248.14.1.5.1.2 | ColumnhmCurrentAddressReceivePort | read-only | current | Either the value '0', or the port number of the port from which a frame must be received in order for this entry's filtering information to apply. A value of z… |
| 1.3.6.1.4.1.248.14.1.5.1.3 | ColumnhmCurrentAddressStaticEgressPorts | read-only | current | The set of ports to which frames received from a specific port and destined for a specific MAC address, are allowed to be forwarded. Each octet within the valu… |
| 1.3.6.1.4.1.248.14.1.5.1.4 | ColumnhmCurrentAddressEgressPorts | read-only | current | The complete set of ports, to which frames destined for this Group MAC Address are currently being forwarded. This includes Group MAC Addresses which were set … |
| 1.3.6.1.4.1.248.14.1.5.1.5 | ColumnhmCurrentAddressStatus | read-only | current | This object indicates the status of this entry. The default value is permanent(3). other(1) - this entry is currently in use but the conditions under which it … |
| 1.3.6.1.4.1.248.14.1.10 | NodehmRS2ext | |||
| 1.3.6.1.4.1.248.14.1.10.1 | ScalarhmRS2OperMode | read-only | current | hmRS2OperMode shows the operational mode of the system: normal: normal mode, standby-active: standby mode, but switch is active, because the master switch is e… |
| 1.3.6.1.4.1.248.14.1.10.2 | ScalarhmRS2ConfigError | read-only | current | RS2hmConfigError indicates a configuration error of the system: no error: no configuration error, error: in normal mode hmConfigError indicates failure of cont… |
| 1.3.6.1.4.1.248.14.1.10.3 | ScalarhmRS2SigRelayState | read-only | current | hmRS2SigRelayState shows the state of the (non potential) signalling relay in standard mode: off: ok, on: powersupply not ok or linkstate of a port not ok or c… |
| 1.3.6.1.4.1.248.14.1.10.4 | TablehmSigLinkTable | not-accessible | current | This table contains all variables to mask an alarm for the signalling relay, produced by a link. The index for a link corresponds with ifMauIfIndex. |
| 1.3.6.1.4.1.248.14.1.10.4.1 | RowhmSigLinkEntry | not-accessible | current | The entry of the hmSigLinkTable. |
| 1.3.6.1.4.1.248.14.1.10.4.1.1 | ColumnhmSigLinkID | read-only | current | This index is used to identify the associated link and corresponds with ifMauIfIndex. |
| 1.3.6.1.4.1.248.14.1.10.4.1.2 | ColumnhmSigLinkAlarm | read-write | current | Indicates whether an alarm for the signalling relay of the associated link will be produced or not, so you can mask the value of ifMauMediaAvailable. |
| 1.3.6.1.4.1.248.14.1.10.5 | ScalarhmSigTrapReason | read-only | current | This object identifies the reason for a trap. There are three reasons for a trap: hmRS2ConfigError ifMauMediaAvailable hmPSState The entity which produces the … |
| 1.3.6.1.4.1.248.14.1.10.6 | ScalarhmSigReasonIndex | read-only | current | This attribute specifies the entity which produces the trap. 1 - n: index of powersupply table / interfaces table 0: config-error. |
| 1.3.6.1.4.1.248.14.1.10.7 | NodehmRS2TopologyGroup | |||
| 1.3.6.1.4.1.248.14.1.10.7.1 | ScalarhmRS2PartnerIpAddress | read-write | current | This variable can be used to set manually the redundancy partner of the RS2 agent. |
| 1.3.6.1.4.1.248.14.1.10.7.2 | TablehmRS2TopologyTable | not-accessible | current | This table describes the topology of rs2-rings. |
| 1.3.6.1.4.1.248.14.1.10.7.2.1 | RowhmRS2TopologyEntry | not-accessible | current | The entry of the hmRS2TopologyTable. |
| 1.3.6.1.4.1.248.14.1.10.7.2.1.1 | ColumnhmRS2TopologyLinkID | read-only | current | This index is used to identify the associated link and corresponds with ifMauIfIndex. |
| 1.3.6.1.4.1.248.14.1.10.7.2.1.2 | ColumnhmRS2TopologyIpAddress | read-write | current | This variable can be used to set manually the next RS2 agent. |
| 1.3.6.1.4.1.248.14.1.10.8 | NodehmRS2ConnectionMirroringGroup | |||
| 1.3.6.1.4.1.248.14.1.10.8.1 | ScalarhmRS2ConnectionMirroringStatus | read-write | current | Set this variable to configure the status of the connection mirroring functionality. The definition of a destination port is not required. |
| 1.3.6.1.4.1.248.14.1.10.8.2 | ScalarhmRS2ConnectionMirroringPortOne | read-write | current | Set this variable to the first port to be mirrored. |
| 1.3.6.1.4.1.248.14.1.10.8.3 | ScalarhmRS2ConnectionMirroringPortTwo | read-write | current | Set this variable to the second port to be mirrored. |
| 1.3.6.1.4.1.248.14.1.10.9 | NodehmRS2DisableLearningGroup | |||
| 1.3.6.1.4.1.248.14.1.10.9.1 | ScalarhmRS2DisableLearningStatus | read-write | current | When set to active the Learning Process is disabled, no new Dynamic Filtering Entries are created and exsisting Dynamic Filtering Entries are removed from the … |
| 1.3.6.1.4.1.248.14.1.10.10 | NodehmRS2SigRelayGroup | |||
| 1.3.6.1.4.1.248.14.1.10.10.1 | ScalarhmRS2SigRelayMode | read-write | current | When set to standard, this is the default, the signalling relay shows the state of hmRS2SigRelayState. When set to manual, the relay is controlled by hmRS2SigR… |
| 1.3.6.1.4.1.248.14.1.10.10.2 | ScalarhmRS2SigRelayManualState | read-write | current | When set to on, this is the default, the signalling relay is opened. When set to off the relay is closed. |
| 1.3.6.1.4.1.248.14.1.10.11 | NodehmRS2VlanGroup | |||
| 1.3.6.1.4.1.248.14.1.10.11.1 | ScalarhmRS2VlanMode | read-write | current | Enables/disables the VLAN mode on this device. When enabled the switch will operate in 802.1Q mode, else in 802.1d mode. After setting this variable the switch… |
| 1.3.6.1.4.1.248.14.1.10.11.2 | ScalarhmRS2VlanStatus | read-only | current | Shows the current VLAN mode of this device. When enabled the switch operates in 802.1Q mode, else in 802.1d mode. |
| 1.3.6.1.4.1.248.14.1.10.12 | NodehmRS2SelftestGroup | |||
| 1.3.6.1.4.1.248.14.1.10.12.1 | ScalarhmRS2SelftestResult | read-only | current | Result of the selftest coded as an integer value with each bit representing the result of a different sub part test. Bits set in the result indicate error cond… |
| 1.3.6.1.4.1.248.14.1.10.12.2 | ScalarhmRS2SelftestMode | read-write | current | Mode of the selftest coded as an integer value with each bit representing a special behaviour of the tests. Meaning of the bits: Bit 0: reboot on failure Bit 1… |
| 1.3.6.1.4.1.248.14.1.10.13 | NodehmRS2PSGroup | |||
| 1.3.6.1.4.1.248.14.1.10.13.1 | ScalarhmRS2PSAlarm | read-write | current | Enables/disables an alarm for the signalling relay of the powersupply state. |
| 1.3.6.1.4.1.248.14.1.10.14 | NodehmRS2RedundancyGroup | |||
| 1.3.6.1.4.1.248.14.1.10.14.1 | ScalarhmRS2RedNotGuaranteedAlarm | read-write | current | When enabled the message 'redundancy not guaranteed' will be signalled on the signalling relay. |
| 1.3.6.1.4.1.248.14.1.10.15 | NodehmRS4RGroup | |||
| 1.3.6.1.4.1.248.14.1.10.15.1 | NodehmRS4RVlanGroup | |||
| 1.3.6.1.4.1.248.14.1.10.15.1.1 | TablehmRS4RVlanPortTable | not-accessible | current | This table describes private vlan enhancements of rs2-4r devices. |
| 1.3.6.1.4.1.248.14.1.10.15.1.1.1 | RowhmRS4RVlanPortEntry | not-accessible | current | The entry of the hmRS4RVlanPortTable. |
| 1.3.6.1.4.1.248.14.1.10.15.1.1.1.1 | ColumnhmRS4RVlanPortID | not-accessible | current | This index is used to identify the port. |
| 1.3.6.1.4.1.248.14.1.10.15.1.1.1.2 | ColumnhmRS4RVlanPortTagFormatRstp | read-write | current | When enabled all tags are removed when sending packets on the port (egress). When disabled tag format is not changed, but RSTP frames are sent tagged. This var… |
| 1.3.6.1.4.1.248.14.1.10.16 | NodehmRS2FDBGroup | |||
| 1.3.6.1.4.1.248.14.1.10.16.1 | NodehmRS2FDBHashGroup | |||
| 1.3.6.1.4.1.248.14.1.10.16.1.1 | ScalarhmRS2FDBHashOptimizingMode | read-write | current | Enables/disables the hash optimizing mode on this device. When enabled the switch will use another hash algorithm optimized for incrementing addresses. After s… |
| 1.3.6.1.4.1.248.14.1.10.16.1.2 | ScalarhmRS2FDBHashOptimizingStatus | read-only | current | Shows the current hash mode of this device. When enabled the switch uses the optimized hash mode, else the normal mode. |
| 1.3.6.1.4.1.248.14.1.11 | NodehmMACH3ChassisExt | |||
| 1.3.6.1.4.1.248.14.1.11.1 | NodehmSelfTestResults | |||
| 1.3.6.1.4.1.248.14.1.11.1.1 | ScalarhmSelfTestCpuResult | read-only | current | Result of the selftest coded as an integer value with each bit representing the result of a different sub part test. Bits 0..15 set in the result indicate warn… |
| 1.3.6.1.4.1.248.14.1.11.1.2 | ScalarhmSelfTestBBResult | read-only | current | Result of the selftest coded as an integer value with each bit representing the result of a different sub part test. Bits set in the result indicate error cond… |
| 1.3.6.1.4.1.248.14.1.11.1.3 | ScalarhmSelfTestBPResult | read-only | current | Result of the selftest coded as an integer value with each bit representing the result of a different sub part test. Bits set in the result indicate error cond… |
| 1.3.6.1.4.1.248.14.1.11.1.4 | ScalarhmSelfTestM1Result | read-only | current | Result of the selftest coded as an integer value with each bit representing the result of a different sub part test. Bits set in the result indicate error cond… |
| 1.3.6.1.4.1.248.14.1.11.1.5 | ScalarhmSelfTestM2Result | read-only | current | Result of the selftest coded as an integer value with each bit representing the result of a different sub part test. Bits set in the result indicate error cond… |
| 1.3.6.1.4.1.248.14.1.11.1.6 | ScalarhmSelfTestM3Result | read-only | current | Result of the selftest coded as an integer value with each bit representing the result of a different sub part test. Bits set in the result indicate error cond… |
| 1.3.6.1.4.1.248.14.1.11.1.7 | ScalarhmSelfTestM4Result | read-only | current | Result of the selftest coded as an integer value with each bit representing the result of a different sub part test. Bits set in the result indicate error cond… |
| 1.3.6.1.4.1.248.14.1.11.1.8 | ScalarhmSelfTestMode | read-write | current | Setting this variable to enable(1) results in a full report of all detected selftest errors. The default value is disable(2). |
| 1.3.6.1.4.1.248.14.1.11.2 | ScalarhmMgmtBusSelected | read-only | current | this variable indicates which management bus is selected. |
| 1.3.6.1.4.1.248.14.1.11.3 | NodehmSerialNumbers | |||
| 1.3.6.1.4.1.248.14.1.11.3.1 | ScalarhmSerialNumCpu | read-only | current | Serial Number of the CPU board. |
| 1.3.6.1.4.1.248.14.1.11.3.2 | ScalarhmSerialNumBB | read-only | current | Serial Number of the basic board. |
| 1.3.6.1.4.1.248.14.1.11.3.3 | ScalarhmSerialNumBP | read-only | current | Serial Number of the packplane unit. |
| 1.3.6.1.4.1.248.14.1.11.3.4 | ScalarhmSerialNumM1 | read-only | current | Serial Number of module 1. |
| 1.3.6.1.4.1.248.14.1.11.3.5 | ScalarhmSerialNumM2 | read-only | current | Serial Number of module 2. |
| 1.3.6.1.4.1.248.14.1.11.3.6 | ScalarhmSerialNumM3 | read-only | current | Serial Number of module 3. |
| 1.3.6.1.4.1.248.14.1.11.3.7 | ScalarhmSerialNumM4 | read-only | current | Serial Number of module 4. |
| 1.3.6.1.4.1.248.14.1.11.4 | NodehmPlugAndPlay | |||
| 1.3.6.1.4.1.248.14.1.11.4.1 | ScalarhmAutoConfigState | read-only | current | state of the configuration retrieval from a neighbour card |
| 1.3.6.1.4.1.248.14.1.11.5 | NodehmMACH3Misc | |||
| 1.3.6.1.4.1.248.14.1.11.5.1 | ScalarhmUserGroupStatus | read-only | current | state of the user group configuration |
| 1.3.6.1.4.1.248.14.1.12 | NodehmAUIGroup | |||
| 1.3.6.1.4.1.248.14.1.12.10 | TablehmAUIModuleTable | not-accessible | current | This table contains all AUI variables that are module dependend. |
| 1.3.6.1.4.1.248.14.1.12.10.1 | RowhmAUIModuleEntry | not-accessible | current | The entry of the hmAUIModuleTable. |
| 1.3.6.1.4.1.248.14.1.12.10.1.1 | ColumnhmAUIModuleID | read-only | current | This index is used to identify a specific module. |
| 1.3.6.1.4.1.248.14.1.12.10.1.2 | ColumnhmAUIModuleDTEPowerMonitor | read-only | current | This variable shows the DTE Power Monitor DIP switch setting on the AUI module. |
| 1.3.6.1.4.1.248.14.1.12.11 | TablehmAUIPortTable | not-accessible | current | This table contains all AUI variables that are port dependend. |
| 1.3.6.1.4.1.248.14.1.12.11.1 | RowhmAUIPortEntry | not-accessible | current | The entry of the hmAUIPortTable. |
| 1.3.6.1.4.1.248.14.1.12.11.1.1 | ColumnhmAUIPortID | read-only | current | This index is used to identify a specific port. |
| 1.3.6.1.4.1.248.14.1.12.11.1.2 | ColumnhmAUIPortDTEPower | read-only | current | This variable shows the DTE Power value of the AUI port. |
| 1.3.6.1.4.1.248.14.1.12.11.1.3 | ColumnhmAUIPortSQETest | read-only | current | This variable shows the SQE Test DIP switch setting on the AUI port. |
| 1.3.6.1.4.1.248.14.2 | NodehmAgent | |||
| 1.3.6.1.4.1.248.14.2.0 | IdentityhmAgentEvent | current | The events of hmAgent. | |
| 1.3.6.1.4.1.248.14.2.0.1 | NotificationhmTemperatureTrap | current | This trap is sent if the value of hmTemperature leaves or enters the range of the agent temperature threshholds hmTempUprLimit and hmTempLwrLimit. | |
| 1.3.6.1.4.1.248.14.2.0.2 | NotificationhmLoginTrap | current | This trap is sent if a user attemps to login via telnet or serial connection. hmLastIpAddr contains the IP address of the login request. the value is 0.0.0.0, … | |
| 1.3.6.1.4.1.248.14.2.0.3 | NotificationhmDuplicateStaticAddressTrap | current | This trap is sent if a user attemps to set the same static unicast address at more than one agent of a chassis | |
| 1.3.6.1.4.1.248.14.2.0.4 | NotificationhmAutoconfigAdapterTrap | current | This trap reports a status change of the Autoconfiguration Adapter. | |
| 1.3.6.1.4.1.248.14.2.0.5 | NotificationhmRelayDuplicateIPTrap | current | This trap reports the detection of a duplicate ip address by the relay agent. | |
| 1.3.6.1.4.1.248.14.2.0.6 | NotificationhmSNTPTrap | current | This trap reports SNTP error conditions. For a list of possible error conditions refer to hmNetSNTPOperStatus. | |
| 1.3.6.1.4.1.248.14.2.0.7 | NotificationhmNetACDNotification | current | This trap reports an address conflict detection. | |
| 1.3.6.1.4.1.248.14.2.0.8 | NotificationhmConfigurationSavedTrap | current | This trap is sent after the configuration of the agent was successfully saved. | |
| 1.3.6.1.4.1.248.14.2.0.9 | NotificationhmConfigurationChangedTrap | current | This trap is sent if the local and the running configuration doesn't match. | |
| 1.3.6.1.4.1.248.14.2.0.10 | NotificationhmAddressRelearnDetectTrap | current | This trap is sent if the relearn threshold is exceeded. | |
| 1.3.6.1.4.1.248.14.2.0.11 | NotificationhmDuplexMismatchTrap | current | This trap indicates a possible serious situation. Check for duplex mismatch, or EMI, or too many cascaded hubs, or exceeded maximum distance at HDX port. | |
| 1.3.6.1.4.1.248.14.2.0.12 | NotificationhmNTPTrap | current | This trap reports NTP error conditions. For a list of possible error conditions refer to hmNetNTPStatusCode. | |
| 1.3.6.1.4.1.248.14.2.0.13 | NotificationhmPortMonitorPortDisabledTrap | current | This trap is sent if a port has been disabled by port disable action by port monitor. | |
| 1.3.6.1.4.1.248.14.2.0.14 | NotificationhmPOEModulePowerUsageOnNotification | current | This trap reports POE error condition. This Notification indicate PSE Threshold usage indication is on, the usage power is above the threshold. At least 500 ms… | |
| 1.3.6.1.4.1.248.14.2.0.15 | NotificationhmPOEModulePowerUsageOffNotification | current | This trap reports POE error condition. This Notification indicate PSE Threshold usage indication is on, the usage power is below the threshold. At least 500 ms… | |
| 1.3.6.1.4.1.248.14.2.0.16 | NotificationhmSysSelftestPortError | current | This trap is sent when the agent wants to reboot due to Opal Workaround 4. It shows that the specific port is in an error state and a device reboot is needed. | |
| 1.3.6.1.4.1.248.14.2.0.17 | NotificationhmMACNotificationTrap | current | This trap is sent when a MAC address has been added to or removed from the FDB on a specific interface. | |
| 1.3.6.1.4.1.248.14.2.0.18 | NotificationhmPOEPortMaxConfiguredPowerLimitExceeded | current | This trap reports an exceeding of the configured power limit. This notification indicates that a PD consumes more power that the maximum configured on the port… | |
| 1.3.6.1.4.1.248.14.2.0.19 | NotificationhmNetMacACDNotification | current | This trap reports a MAC address conflict with it's own MAC address. | |
| 1.3.6.1.4.1.248.14.2.1 | ScalarhmAction | read-write | current | This object, when read, always returns a value of other(1). A value of reset(2) has the same effect as a power-on sequence (coldstart). Writing a value of hotR… |
| 1.3.6.1.4.1.248.14.2.2 | ScalarhmActionResult | read-only | current | Result of the last activated action. A value of zero indicates that the result is ok. Bits set in the result indicate error conditions. |
| 1.3.6.1.4.1.248.14.2.3 | NodehmNetwork | |||
| 1.3.6.1.4.1.248.14.2.3.1 | ScalarhmNetLocalIPAddr | read-write | current | IP address of the management agent board. Changing this value will take effect after activating with hmNetAction. |
| 1.3.6.1.4.1.248.14.2.3.2 | ScalarhmNetLocalPhysAddr | read-only | current | Physical base address (MAC-address) of the agent. |
| 1.3.6.1.4.1.248.14.2.3.3 | ScalarhmNetGatewayIPAddr | read-write | current | IP address of the default gateway. Changing this value will take effect after activating with hmNetAction. |
| 1.3.6.1.4.1.248.14.2.3.4 | ScalarhmNetMask | read-write | current | Subnet mask. Changing this value will take effect after activating with hmNetAction. |
| 1.3.6.1.4.1.248.14.2.3.5 | ScalarhmNetPPPBaseIPAddr | read-write | current | Base address of the IP address range used by the point-to-point protocol. The IP addresses hmNetPPPBaseAddress..hmNetPPPBaseAddress+4 are assigned to the clien… |
| 1.3.6.1.4.1.248.14.2.3.6 | ScalarhmNetPPPNetMask | read-write | current | Subnet mask used by the point-to-point protocol. Changing this variable on one agent automatically updates the value on the other agents in the same chassis. |
| 1.3.6.1.4.1.248.14.2.3.7 | ScalarhmNetAction | read-write | current | This object, when read, always returns a value of other(1). Setting the object to activate(2) causes a reconfiguration of the IP protocol stack with the curren… |
| 1.3.6.1.4.1.248.14.2.3.8 | ScalarhmNetVlanID | read-write | current | Vlan ID of the IP protocol stack. If the value is 0, Traffic from all Vlans is accepted. Every other value means that only traffic of the appropriate Vlan is a… |
| 1.3.6.1.4.1.248.14.2.3.9 | ScalarhmNetLocalPhysAddrRange | read-only | current | The number of MAC addresses reserved for this device, starting from hmNetLocalPhysAddr. |
| 1.3.6.1.4.1.248.14.2.3.10 | ScalarhmNetVlanPriority | read-write | current | Vlan Priority which is used in management replies. |
| 1.3.6.1.4.1.248.14.2.3.11 | ScalarhmNetIpDscpPriority | read-write | current | IP DSCP value which is used in management replies. |
| 1.3.6.1.4.1.248.14.2.3.12 | NodehmNetACDGroup | |||
| 1.3.6.1.4.1.248.14.2.3.12.1 | ScalarhmNetACDStatus | read-write | current | Sets the mode of the ip address conflict detection mechanism on this device. enable(1): Both active and passive detection are active. disable(2): No detection … |
| 1.3.6.1.4.1.248.14.2.3.12.3 | ScalarhmNetACDOngoingProbeStatus | read-write | current | If enabled, the device sends periodic arp probes. |
| 1.3.6.1.4.1.248.14.2.3.12.5 | ScalarhmNetACDDelay | read-write | current | The maximum detection delay time in milliseconds. Time gap between arp probes. |
| 1.3.6.1.4.1.248.14.2.3.12.7 | ScalarhmNetACDReleaseDelay | read-write | current | Delay in seconds to the next arp probe cycle after an ip address conflict was detected. |
| 1.3.6.1.4.1.248.14.2.3.12.9 | ScalarhmNetACDMaxProtection | read-write | current | Maximum number of frequent address protections. |
| 1.3.6.1.4.1.248.14.2.3.12.11 | ScalarhmNetACDProtectInterval | read-write | current | Delay in milliseconds between two protections. |
| 1.3.6.1.4.1.248.14.2.3.12.13 | ScalarhmNetACDFaultState | read-only | current | true(1) if an active address conflict is detected. false(2) if no present address conflict. |
| 1.3.6.1.4.1.248.14.2.3.12.20 | TablehmNetACDAddrTable | not-accessible | current | This table contains address conflict detection information on the local system known to this agent. |
| 1.3.6.1.4.1.248.14.2.3.12.20.1 | RowhmNetACDAddrEntry | not-accessible | current | IP Address conflict detection information about a particular address on the local system kown to this agent. There may be multiple addresses configured on the … |
| 1.3.6.1.4.1.248.14.2.3.12.20.1.1 | ColumnhmNetACDTimeMark | read-only | current | A TimeFilter for this entry. See the TimeFilter textual convention in IETF RFC 2021 and http://www.ietf.org/IESG/Implementations/RFC2021-Implementation.txt to … |
| 1.3.6.1.4.1.248.14.2.3.12.20.1.3 | ColumnhmNetACDAddrSubtype | read-only | current | The type of management address identifier encoding used in the associated 'hmNetACDAddr' object. |
| 1.3.6.1.4.1.248.14.2.3.12.20.1.5 | ColumnhmNetACDAddr | read-only | current | The string value used to identify the management address component associated with the local system. |
| 1.3.6.1.4.1.248.14.2.3.12.20.1.7 | ColumnhmNetACDMAC | read-only | current | The physical address of the device that was detected causing the ip address conflict. |
| 1.3.6.1.4.1.248.14.2.3.12.20.1.9 | ColumnhmNetACDIfId | read-only | current | The integer value used to identify the interface number on the local system where the ip address conflict was detected. |
| 1.3.6.1.4.1.248.14.2.3.13 | NodehmNetMacACDGroup | |||
| 1.3.6.1.4.1.248.14.2.3.13.1 | ScalarhmNetMacACDStatus | read-write | current | Sets the status of the MAC address conflict detection mechanism on this device. |
| 1.3.6.1.4.1.248.14.2.3.13.2 | ScalarhmNetMacACDConflictAddress | read-only | current | MAC address in case of a conflict. |
| 1.3.6.1.4.1.248.14.2.3.20 | NodehmNetHiDiscoveryGroup | |||
| 1.3.6.1.4.1.248.14.2.3.20.1 | ScalarhmNetHiDiscoveryStatus | read-write | current | Enables/disables the HiDiscovery protocol on this device. This protocol allows a remote host to detect devices without an ip configuration. It also allows the … |
| 1.3.6.1.4.1.248.14.2.3.20.2 | ScalarhmNetHiDiscoveryRelay | read-write | current | Relay/bridge HiDiscovery frames. |
| 1.3.6.1.4.1.248.14.2.3.20.3 | ScalarhmNetHiDiscoveryProtocol | read-only | current | Shows the HiDiscovery protocols supported by the device. |
| 1.3.6.1.4.1.248.14.2.3.30 | NodehmNetSNTPGroup | |||
| 1.3.6.1.4.1.248.14.2.3.30.1 | ScalarhmNetSNTPStatus | read-write | current | Enables/disables the Simple Network Time Protocol on this device. |
| 1.3.6.1.4.1.248.14.2.3.30.2 | ScalarhmNetSNTPServer | read-write | current | The IP Address of an external Time Server. |
| 1.3.6.1.4.1.248.14.2.3.30.3 | ScalarhmNetSNTPTime | read-write | current | The time in seconds since 01/01/1900 UTC. |
| 1.3.6.1.4.1.248.14.2.3.30.4 | ScalarhmNetSNTPLocalOffset | read-write | current | The difference between local time and UTC in minutes. |
| 1.3.6.1.4.1.248.14.2.3.30.5 | ScalarhmNetSNTPServer2 | read-write | current | IP address of a secondary (backup) time server. |
| 1.3.6.1.4.1.248.14.2.3.30.6 | ScalarhmNetSNTPSyncInterval | read-write | current | SNTP synchronisation interval in seconds. |
| 1.3.6.1.4.1.248.14.2.3.30.7 | ScalarhmNetSNTPAcceptBroadcasts | read-write | current | This MIB variable specifies whether SNTP broadcasts will be allowed to synchronize the local clock. If hmNetSNTPStatus is enabled, this variable will be ignore… |
| 1.3.6.1.4.1.248.14.2.3.30.8 | ScalarhmNetSNTPAnycastAddr | read-write | current | Destination address for SNTP broadcasts. A broadcast, multicast or unicast address may be specified. Setting the address to 0.0.0.0 disables SNTP broadcasts. |
| 1.3.6.1.4.1.248.14.2.3.30.9 | ScalarhmNetSNTPAnycastVlan | read-write | current | Vlan for anycast mode. |
| 1.3.6.1.4.1.248.14.2.3.30.10 | ScalarhmNetSNTPAnycastInterval | read-write | current | Interval of SNTP broadcast messages in seconds. |
| 1.3.6.1.4.1.248.14.2.3.30.11 | ScalarhmNetSNTPOperStatus | read-only | current | Operational status of the SNTP sub-system. The value is a bit mask: 0 SNTP disabled 1 local system clock synchronized 2 SNTP loop detected 4 generic error 8 on… |
| 1.3.6.1.4.1.248.14.2.3.30.12 | ScalarhmNetSNTPTimeAdjustThreshold | read-write | current | The threshold in milli-seconds whether to decide to set the received SNTP time directly to the local clock or not. If the hmNetSNTPTimeAdjustThreshold value is… |
| 1.3.6.1.4.1.248.14.2.3.30.13 | ScalarhmNetSNTPOnceAtStartup | read-write | current | If enabled, SNTP ist automaticaly disabled after once synchronized to an SNTP Server. |
| 1.3.6.1.4.1.248.14.2.3.30.14 | ScalarhmNetSNTPServerOnlyIfSync | read-write | current | The SNTP server is enabled only if synchronized to another external time reference. (e.g. SNTP or PTP) |
| 1.3.6.1.4.1.248.14.2.3.30.15 | ScalarhmNetSNTPServerStatus | read-write | current | Enables/disables the SNTP server on this device if hmNetSNTPStatus is enabled. |
| 1.3.6.1.4.1.248.14.2.3.30.16 | ScalarhmNetSNTPClientStatus | read-write | current | Enables/disables the SNTP client on this device if hmNetSNTPStatus is enabled. |
| 1.3.6.1.4.1.248.14.2.3.31 | NodehmNetNTPGroup | |||
| 1.3.6.1.4.1.248.14.2.3.31.1 | ScalarhmNetNTPOperation | read-write | current | Selects operation mode for NTP. |
| 1.3.6.1.4.1.248.14.2.3.31.2 | ScalarhmNetNTPServer1AddrType | read-write | current | Address type for server 1. Currently, only ipv4 is supported. |
| 1.3.6.1.4.1.248.14.2.3.31.3 | ScalarhmNetNTPServer1Address | read-write | current | The address of the first external time server. |
| 1.3.6.1.4.1.248.14.2.3.31.4 | ScalarhmNetNTPServer2AddrType | read-write | current | Address type for server 2. Currently, only ipv4 is supported. |
| 1.3.6.1.4.1.248.14.2.3.31.5 | ScalarhmNetNTPServer2Address | read-write | current | The address of the second external time server. |
| 1.3.6.1.4.1.248.14.2.3.31.6 | ScalarhmNetNTPSyncInterval | read-write | current | NTP synchronisation interval in seconds. NTP will round down the value to a power of 2. The protocol will use an interval between the rounded value and the nex… |
| 1.3.6.1.4.1.248.14.2.3.31.7 | ScalarhmNetNTPAnycastAddrType | read-write | current | Address type for anycasts. Currently, only ipv4 is supported. |
| 1.3.6.1.4.1.248.14.2.3.31.8 | ScalarhmNetNTPAnycastAddress | read-write | current | Destination address for NTP broadcasts. A broadcast, multicast or unicast address may be specified. Setting the address to 0.0.0.0 disables NTP broadcasts. |
| 1.3.6.1.4.1.248.14.2.3.31.9 | ScalarhmNetNTPAnycastInterval | read-write | current | Interval of NTP broadcast messages in seconds. NTP will round down the value to a power of 2. |
| 1.3.6.1.4.1.248.14.2.3.31.10 | ScalarhmNetNTPStatusText | read-only | current | Operational status of the NTP sub-system. |
| 1.3.6.1.4.1.248.14.2.3.31.11 | ScalarhmNetNTPStatusCode | read-only | current | Operational status of the NTP sub-system. The value is a bit mask: 1 local system clock synchronized 2 generic error (see hmNetNTPStatusText) 100 server 1 not … |
| 1.3.6.1.4.1.248.14.2.3.40 | NodehmNetPTPGroup | |||
| 1.3.6.1.4.1.248.14.2.3.40.1 | NodehmNetPTPConfiguration | |||
| 1.3.6.1.4.1.248.14.2.3.40.1.1 | ScalarhmNetPTPEnable | read-write | current | Enable or disable the Precision Time Protocol on this node. |
| 1.3.6.1.4.1.248.14.2.3.40.1.2 | ScalarhmNetPTPAction | read-write | current | Initialize the PTP Clock. Value 2: The specification initialization set shall be used. Value 3: The initialization set stored in nonvolatile storage for recove… |
| 1.3.6.1.4.1.248.14.2.3.40.1.3 | ScalarhmNetPTPClockMode | read-write | current | This members value shall indicate which clock mode is used. The ptp-mode-boundary-clock mode specifies the mode as described in the IEEE1588 standard. In the '… |
| 1.3.6.1.4.1.248.14.2.3.40.1.4 | ScalarhmNetPTPSlavePort | read-write | current | This members value shall indicate the slave port where this clock is synchronized in the ptp-mode-static-boundary-clock mode. The default value is 0 (i.e. cloc… |
| 1.3.6.1.4.1.248.14.2.3.40.1.5 | ScalarhmNetPTPIsSynchronized | read-only | current | If the clock is synchronized to the current Master this object is set to true. Otherwise it is set to false. The clock sets this object to true, if the offset … |
| 1.3.6.1.4.1.248.14.2.3.40.1.6 | ScalarhmNetPTPSyncLowerBound | read-write | current | This object defines when the hmNetPTPIsSynchronized object is set to true. If the absolute value of the offset is smaller than hmNetPTPSyncLowerBound, the hmNe… |
| 1.3.6.1.4.1.248.14.2.3.40.1.7 | ScalarhmNetPTPSyncUpperBound | read-write | current | This object defines when the hmNetPTPIsSynchronized object is set to false. If the absolute value of the offset is bigger than hmNetPTPSyncUpperBound, the hmNe… |
| 1.3.6.1.4.1.248.14.2.3.40.1.8 | ScalarhmNetPTPClockStratum | read-only | current | The clock stratum, or stratum number, describes one measure of the quality of a clock. Each clock shall be characterized by a stratum number to be used by the … |
| 1.3.6.1.4.1.248.14.2.3.40.1.9 | ScalarhmNetPTPClockIdentifier | read-only | current | The clock identifier indicates the nature and expected absolute accuracy and epoch of a given clock. Possible values are ATOM, GPS, NTP, HAND, INIT, DFLT. Valu… |
| 1.3.6.1.4.1.248.14.2.3.40.1.10 | ScalarhmNetPTPClockVariance | read-write | current | The clock variance reflects the inherent characteristics of the clock. It is an estimate of the local clock from a linear time scale when it is not synchronize… |
| 1.3.6.1.4.1.248.14.2.3.40.1.11 | ScalarhmNetPTPPreferredMaster | read-write | current | A clock may be administratively designated as part of a preferred master clock set. This creates a set of clocks that will be favored over those not so designa… |
| 1.3.6.1.4.1.248.14.2.3.40.1.12 | ScalarhmNetPTPSyncInterval | read-write | current | The sync interval shall be the interval in seconds between successive Sync messages issued by master clocks. It shall have the same value for all clocks in a s… |
| 1.3.6.1.4.1.248.14.2.3.40.1.13 | ScalarhmNetPTPSubdomainName | read-write | current | Each subdomain shall be characterized by a name recognized by all PTP clocks in the subdomain as the basis for sending and receiving PTP communications. Change… |
| 1.3.6.1.4.1.248.14.2.3.40.1.14 | ScalarhmNetPTPOffsetFromMasterNanoSecs | read-only | current | Current offset between its parent and this node in nanoseconds. Values greater than 1 second or less than -1 second are indicated by the maximum or minimum INT… |
| 1.3.6.1.4.1.248.14.2.3.40.1.15 | ScalarhmNetPTPAbsMaxOffset | read-only | current | This members value shall indicate the absolute value for the maximum offset between its parent and this node. The value is set to zero if the offset is the fir… |
| 1.3.6.1.4.1.248.14.2.3.40.1.16 | ScalarhmNetPTPOneWayDelayNanoSecs | read-only | current | Current one_way_delay between its parent and this node in nanoseconds. Values greater than 1 second or less than -1 second are indicated by the maximum or mini… |
| 1.3.6.1.4.1.248.14.2.3.40.1.17 | ScalarhmNetPTPTimeSeconds | read-only | current | This members value shall indicate PTP time in seconds since 1.1.1970. |
| 1.3.6.1.4.1.248.14.2.3.40.1.18 | ScalarhmNetPTPObservedDrift | read-only | current | Relative rate (frequency or drift) between its parent and this node in nanoseconds. Values greater than 1 second or less than -1 second are indicated by the ma… |
| 1.3.6.1.4.1.248.14.2.3.40.1.19 | ScalarhmNetPTPPiIntegral | read-write | current | A digital PI servo has the following difference equation y(k) = y(k-1) + (Kp + Ki* T )* x(k) + Kp * x(k-1). This object specifies the Ki* 100000 term (integral… |
| 1.3.6.1.4.1.248.14.2.3.40.1.20 | ScalarhmNetPTPParentUUID | read-only | current | The UUID of its Parent. For Ethernet this is the MAC address of the management agent. |
| 1.3.6.1.4.1.248.14.2.3.40.1.21 | ScalarhmNetPTPGrandmasterUUID | read-only | current | The UUID of its Grandmaster. For Ethernet this is the MAC address of the management agent. |
| 1.3.6.1.4.1.248.14.2.3.40.1.22 | ScalarhmNetPTPCurrentUTCOffset | read-only | current | UTC time differs from the TAI time by a constant offset. This offset is modified on occasion by adding or subtracting leap seconds. The current number of leap … |
| 1.3.6.1.4.1.248.14.2.3.40.1.23 | ScalarhmNetPTPleap59 | read-only | current | When TRUE the last minute of the current day will contain 59 seconds. |
| 1.3.6.1.4.1.248.14.2.3.40.1.24 | ScalarhmNetPTPleap61 | read-only | current | When TRUE the last minute of the current day will contain 61 seconds. |
| 1.3.6.1.4.1.248.14.2.3.40.1.25 | ScalarhmNetPTPStepsRemoved | read-only | current | This members value shall be the number of communication paths traversed between the local clock and the grandmaster clock. For example, steps_removed in a slav… |
| 1.3.6.1.4.1.248.14.2.3.40.1.26 | ScalarhmNetPTPEpochNumber | read-only | current | The PTP epoch began at 0 hours on 1 January 1970. Times measured since this epoch are designated in this standard as PTP Seconds. When the epoch is the PTP epo… |
| 1.3.6.1.4.1.248.14.2.3.40.1.27 | ScalarhmNetPTPStaticDrift | read-write | current | Relative rate (frequency or drift) between a reference clock and this node in nanoseconds per second (ns/s). This value is only applied if no port is in slave … |
| 1.3.6.1.4.1.248.14.2.3.40.2 | TablehmNetPTPPortTable | not-accessible | current | This table contains variables for each PTP port of the switch. |
| 1.3.6.1.4.1.248.14.2.3.40.2.1 | RowhmNetPTPPortEntry | not-accessible | current | Entry for one port. |
| 1.3.6.1.4.1.248.14.2.3.40.2.1.1 | ColumnhmNetPTPPortID | read-only | current | Index to identify a port of the switch unit. This value is never greater than hmSysGroupCapacity. |
| 1.3.6.1.4.1.248.14.2.3.40.2.1.2 | ColumnhmNetPTPPortState | read-only | current | State of the PTP port intance. |
| 1.3.6.1.4.1.248.14.2.3.40.2.1.3 | ColumnhmNetPTPPortBurstEnable | read-write | current | Controls the burst enable flag. |
| 1.3.6.1.4.1.248.14.2.3.40.2.1.4 | ColumnhmNetPTPPortEnable | read-write | current | The respective PTP Port of the Boundary Clock can be set to true (enabled) or set to false (disabled). If the port is disabled no PTP packets will be processed… |
| 1.3.6.1.4.1.248.14.2.3.41 | NodehmNetPTP2Group | |||
| 1.3.6.1.4.1.248.14.2.3.41.1 | NodehmNetPTP2Configuration | |||
| 1.3.6.1.4.1.248.14.2.3.41.1.1 | ScalarhmNetPTP2TwoStepClock | read-only | current | |
| 1.3.6.1.4.1.248.14.2.3.41.1.2 | ScalarhmNetPTP2ClockIdentity | read-only | current | |
| 1.3.6.1.4.1.248.14.2.3.41.1.3 | ScalarhmNetPTP2Priority1 | read-write | current | |
| 1.3.6.1.4.1.248.14.2.3.41.1.4 | ScalarhmNetPTP2Priority2 | read-write | current | |
| 1.3.6.1.4.1.248.14.2.3.41.1.5 | ScalarhmNetPTP2DomainNumber | read-write | current | |
| 1.3.6.1.4.1.248.14.2.3.41.1.6 | ScalarhmNetPTP2StepsRemoved | read-only | current | |
| 1.3.6.1.4.1.248.14.2.3.41.1.7 | ScalarhmNetPTP2OffsetFromMaster | read-only | current | |
| 1.3.6.1.4.1.248.14.2.3.41.1.8 | ScalarhmNetPTP2MeanPathDelay | read-only | current | |
| 1.3.6.1.4.1.248.14.2.3.41.1.9 | ScalarhmNetPTP2ParentPortIdentity | read-only | current | |
| 1.3.6.1.4.1.248.14.2.3.41.1.10 | ScalarhmNetPTP2ParentStats | read-only | current | |
| 1.3.6.1.4.1.248.14.2.3.41.1.11 | ScalarhmNetPTP2ObservedParentOffsetScaledLogVariance | read-only | current | |
| 1.3.6.1.4.1.248.14.2.3.41.1.12 | ScalarhmNetPTP2ObservedParentClockPhaseChangeRate | read-only | current | |
| 1.3.6.1.4.1.248.14.2.3.41.1.13 | ScalarhmNetPTP2GrandmasterIdentity | read-only | current | |
| 1.3.6.1.4.1.248.14.2.3.41.1.14 | ScalarhmNetPTP2GrandmasterClockQuality | read-only | current | |
| 1.3.6.1.4.1.248.14.2.3.41.1.15 | ScalarhmNetPTP2GrandmasterPriority1 | read-only | current | |
| 1.3.6.1.4.1.248.14.2.3.41.1.16 | ScalarhmNetPTP2GrandmasterPriority2 | read-only | current | |
| 1.3.6.1.4.1.248.14.2.3.41.1.17 | ScalarhmNetPTP2CurrentUtcOffset | read-write | current | |
| 1.3.6.1.4.1.248.14.2.3.41.1.18 | ScalarhmNetPTP2CurrentUtcOffsetValid | read-write | current | |
| 1.3.6.1.4.1.248.14.2.3.41.1.19 | ScalarhmNetPTP2Leap59 | read-only | current | |
| 1.3.6.1.4.1.248.14.2.3.41.1.20 | ScalarhmNetPTP2Leap61 | read-only | current | |
| 1.3.6.1.4.1.248.14.2.3.41.1.21 | ScalarhmNetPTP2TimeTraceable | read-write | current | |
| 1.3.6.1.4.1.248.14.2.3.41.1.22 | ScalarhmNetPTP2FrequencyTraceable | read-write | current | |
| 1.3.6.1.4.1.248.14.2.3.41.1.23 | ScalarhmNetPTP2PtpTimescale | read-write | current | |
| 1.3.6.1.4.1.248.14.2.3.41.1.24 | ScalarhmNetPTP2TimeSource | read-write | current | |
| 1.3.6.1.4.1.248.14.2.3.41.1.25 | ScalarhmNetPTP2GrandmasterClockClass | read-only | current | |
| 1.3.6.1.4.1.248.14.2.3.41.1.26 | ScalarhmNetPTP2GrandmasterClockAccuracy | read-only | current | |
| 1.3.6.1.4.1.248.14.2.3.41.1.27 | ScalarhmNetPTP2GrandmasterClockVariance | read-only | current | |
| 1.3.6.1.4.1.248.14.2.3.41.2 | TablehmNetPTP2PortTable | not-accessible | current | This table contains variables for each PTP2 port of the switch. |
| 1.3.6.1.4.1.248.14.2.3.41.2.1 | RowhmNetPTP2PortEntry | not-accessible | current | Entry for one port. |
| 1.3.6.1.4.1.248.14.2.3.41.2.1.1 | ColumnhmNetPTP2PortEnable | read-write | current | |
| 1.3.6.1.4.1.248.14.2.3.41.2.1.2 | ColumnhmNetPTP2PortState | read-only | current | State of the PTP2 port intance. |
| 1.3.6.1.4.1.248.14.2.3.41.2.1.3 | ColumnhmNetPTP2LogDelayReqInterval | read-only | current | |
| 1.3.6.1.4.1.248.14.2.3.41.2.1.4 | ColumnhmNetPTP2PeerMeanPathDelay | read-only | current | |
| 1.3.6.1.4.1.248.14.2.3.41.2.1.5 | ColumnhmNetPTP2LogAnnounceInterval | read-write | current | |
| 1.3.6.1.4.1.248.14.2.3.41.2.1.6 | ColumnhmNetPTP2AnnounceReceiptTimeout | read-write | current | |
| 1.3.6.1.4.1.248.14.2.3.41.2.1.7 | ColumnhmNetPTP2LogSyncInterval | read-write | current | |
| 1.3.6.1.4.1.248.14.2.3.41.2.1.8 | ColumnhmNetPTP2DelayMechanism | read-write | current | |
| 1.3.6.1.4.1.248.14.2.3.41.2.1.9 | ColumnhmNetPTP2LogPdelayReqInterval | read-write | current | |
| 1.3.6.1.4.1.248.14.2.3.41.2.1.10 | ColumnhmNetPTP2VersionNumber | read-write | current | |
| 1.3.6.1.4.1.248.14.2.3.41.2.1.11 | ColumnhmNetPTP2NetworkProtocol | read-write | current | |
| 1.3.6.1.4.1.248.14.2.3.41.2.1.12 | ColumnhmNetPTP2V1Compatibility | read-write | current | |
| 1.3.6.1.4.1.248.14.2.3.41.2.1.13 | ColumnhmNetPTP2DelayAsymmetry | read-write | current | |
| 1.3.6.1.4.1.248.14.2.3.41.2.1.14 | ColumnhmNetPTP2PortCapability | read-only | current | This object shows the capability of the ptp port. |
| 1.3.6.1.4.1.248.14.2.3.41.2.1.15 | ColumnhmNetPTP2VlanID | read-write | current | VLAN in which PTP packets are send. With a value of -1 all packets are send untagged |
| 1.3.6.1.4.1.248.14.2.3.41.2.1.16 | ColumnhmNetPTP2VlanPriority | read-write | current | VLAN priority of tagged ptp packets |
| 1.3.6.1.4.1.248.14.2.3.42 | NodehmNetPTP2TCGroup | |||
| 1.3.6.1.4.1.248.14.2.3.42.1 | NodehmNetPTP2TCConfiguration | |||
| 1.3.6.1.4.1.248.14.2.3.42.1.1 | ScalarhmNetPTP2TCClockIdentity | read-only | current | |
| 1.3.6.1.4.1.248.14.2.3.42.1.2 | ScalarhmNetPTP2TCDelayMechanism | read-write | current | |
| 1.3.6.1.4.1.248.14.2.3.42.1.3 | ScalarhmNetPTP2TCPrimaryDomain | read-write | current | |
| 1.3.6.1.4.1.248.14.2.3.42.1.4 | ScalarhmNetPTP2TCSyntonized | read-write | current | |
| 1.3.6.1.4.1.248.14.2.3.42.1.5 | ScalarhmNetPTP2TCNetworkProtocol | read-write | current | |
| 1.3.6.1.4.1.248.14.2.3.42.1.6 | ScalarhmNetPTP2TCCurrentMaster | read-only | current | |
| 1.3.6.1.4.1.248.14.2.3.42.1.7 | ScalarhmNetPTP2TCManagement | read-write | current | |
| 1.3.6.1.4.1.248.14.2.3.42.1.8 | ScalarhmNetPTP2TCMultiDomainMode | read-write | current | |
| 1.3.6.1.4.1.248.14.2.3.42.1.9 | ScalarhmNetPTP2TCSyncLocalClock | read-write | current | Enable synchronisation of the local clock. This is only valid if syntonization is enabled |
| 1.3.6.1.4.1.248.14.2.3.42.1.10 | ScalarhmNetPTP2TCVlanID | read-write | current | VLAN in which PTP packets are send. With a value of -1 all packets are send untagged |
| 1.3.6.1.4.1.248.14.2.3.42.1.11 | ScalarhmNetPTP2TCVlanPriority | read-write | current | VLAN priority of tagged ptp packets |
| 1.3.6.1.4.1.248.14.2.3.42.1.12 | ScalarhmNetPTP2TCProfile | read-write | current | Configures PTP parameters to a specific profile. Setting the object to user-defined (1) has no effect. |
| 1.3.6.1.4.1.248.14.2.3.42.1.13 | ScalarhmNetPTP2TCPowerTLVCheck | read-write | current | If set to true only Announce messages including the TLVs specified in the Power Profile (C37.238) are accepted for syntonization |
| 1.3.6.1.4.1.248.14.2.3.42.2 | TablehmNetPTP2TCPortTable | not-accessible | current | This table contains variables for each PTP2 TC port of the switch. |
| 1.3.6.1.4.1.248.14.2.3.42.2.1 | RowhmNetPTP2TCPortEntry | not-accessible | current | Entry for one port. |
| 1.3.6.1.4.1.248.14.2.3.42.2.1.1 | ColumnhmNetPTP2TCPortEnable | read-write | current | |
| 1.3.6.1.4.1.248.14.2.3.42.2.1.2 | ColumnhmNetPTP2TCLogPdelayReqInterval | read-write | current | |
| 1.3.6.1.4.1.248.14.2.3.42.2.1.3 | ColumnhmNetPTP2TCFaulty | read-only | current | |
| 1.3.6.1.4.1.248.14.2.3.42.2.1.4 | ColumnhmNetPTP2TCPeerMeanPathDelay | read-only | current | |
| 1.3.6.1.4.1.248.14.2.3.42.2.1.5 | ColumnhmNetPTP2TCDelayAsymmetry | read-write | current | |
| 1.3.6.1.4.1.248.14.2.3.50 | NodehmNetSNMPGroup | |||
| 1.3.6.1.4.1.248.14.2.3.50.1 | ScalarhmNetSNMPv1Status | read-write | current | Enables/disables the SNMP Version 1 protocol. |
| 1.3.6.1.4.1.248.14.2.3.50.2 | ScalarhmNetSNMPv2Status | read-write | current | Enables/disables the SNMP Version 2 protocol. |
| 1.3.6.1.4.1.248.14.2.3.50.3 | ScalarhmNetSNMPv3Status | read-write | current | Enables/disables the SNMP Version 3 protocol. |
| 1.3.6.1.4.1.248.14.2.3.50.4 | ScalarhmNetSNMPAccessStatus | read-write | current | Enables/disables the SNMP protocol access on this device. If only read access is allowed set this object to readOnly(3). |
| 1.3.6.1.4.1.248.14.2.3.50.5 | ScalarhmNetSNMPSynchronizeV1V3Status | read-write | current | Enables/disables the synchronization between the SNMPv1 community and the SNMPv3 password. If enabled the first read-write community in hmAuthCommTable is used… |
| 1.3.6.1.4.1.248.14.2.3.50.6 | ScalarhmNetSNMPPortNumber | read-write | current | The port number of the snmp server. To activate the port number the device has to be restarted. |
| 1.3.6.1.4.1.248.14.2.3.50.7 | ScalarhmNetSNMPRadiusAuthenticate | read-write | current | Enables/disables authentication of SNMPv3 users via RADIUS server |
| 1.3.6.1.4.1.248.14.2.3.50.8 | ScalarhmNetSNMPv3EncryptionReadWriteStatus | read-write | current | Enables/disables the SNMPv3 admin Data Encryption. |
| 1.3.6.1.4.1.248.14.2.3.50.9 | ScalarhmNetSNMPv3EncryptionReadOnlyStatus | read-write | current | Enables/disables the SNMPv3 user Data Encryption. |
| 1.3.6.1.4.1.248.14.2.3.50.11 | ScalarhmNetSNMPSynchronizeV3V1Status | read-write | current | Enables/disables the synchronization between the SNMPv3 password table (hmAgentUserConfigTable) and the SNMPv1/v2 community table (hmAgentSnmpCommunityConfigTa… |
| 1.3.6.1.4.1.248.14.2.3.60 | NodehmNetGPSGroup | |||
| 1.3.6.1.4.1.248.14.2.3.60.1 | ScalarhmNetGPSIsAvailable | read-only | current | Indicates if a GPS module is available. |
| 1.3.6.1.4.1.248.14.2.3.60.2 | ScalarhmNetGPSIsSynchronized | read-only | current | Indicates if the GPS module is synchronized to the GPS signal. |
| 1.3.6.1.4.1.248.14.2.3.60.3 | ScalarhmNetGPSMode | read-write | current | Shows the mode of the GPS module. If hmNetGPSMode is gpsIn(1), the GPS module reads the signal from a GPS receiver in the format given in hmNetGPSTimeStringFor… |
| 1.3.6.1.4.1.248.14.2.3.60.4 | ScalarhmNetGPSTimeStringFormat | read-write | current | These are the GPS time string formats which a GPS module can read or write. |
| 1.3.6.1.4.1.248.14.2.3.70 | NodehmRestrictedMgtAccessGroup | |||
| 1.3.6.1.4.1.248.14.2.3.70.1 | ScalarhmRMAOperation | read-write | current | Enables/disables Management Access globally |
| 1.3.6.1.4.1.248.14.2.3.70.2 | TablehmRMATable | not-accessible | current | A list of Management Access Entries (Rules) to increase security |
| 1.3.6.1.4.1.248.14.2.3.70.2.1 | RowhmRMAEntry | not-accessible | current | An entry contains a rule for the Management Access. |
| 1.3.6.1.4.1.248.14.2.3.70.2.1.1 | ColumnhmRMAIndex | read-only | current | The unique index used for each row in the RMA Table |
| 1.3.6.1.4.1.248.14.2.3.70.2.1.2 | ColumnhmRMARowStatus | read-create | current | Describes the status of a row in this table if it is active or not available ... |
| 1.3.6.1.4.1.248.14.2.3.70.2.1.3 | ColumnhmRMAIpAddr | read-write | current | Allowed IP address |
| 1.3.6.1.4.1.248.14.2.3.70.2.1.4 | ColumnhmRMANetMask | read-write | current | Network Mask |
| 1.3.6.1.4.1.248.14.2.3.70.2.1.5 | ColumnhmRMASrvHttp | read-write | current | Enables/disables HTTP access |
| 1.3.6.1.4.1.248.14.2.3.70.2.1.6 | ColumnhmRMASrvSnmp | read-write | current | Enables/disbales SNMP access |
| 1.3.6.1.4.1.248.14.2.3.70.2.1.7 | ColumnhmRMASrvTelnet | read-write | current | Enables/disables Telnet access |
| 1.3.6.1.4.1.248.14.2.3.70.2.1.8 | ColumnhmRMASrvSsh | read-write | current | Enables/disables SSH access |
| 1.3.6.1.4.1.248.14.2.3.70.2.1.9 | ColumnhmRMASrvHttps | read-write | current | Enables/disables HTTPS access |
| 1.3.6.1.4.1.248.14.2.4 | NodehmFSTable | |||
| 1.3.6.1.4.1.248.14.2.4.1 | ScalarhmFSUpdFileName | read-write | current | Full specified filename of the update file e.g. tftp://192.9.200.1/upd/bootrom.v3 . |
| 1.3.6.1.4.1.248.14.2.4.2 | ScalarhmFSConfFileName | read-write | current | Full specified name of the configuration file e.g. tftp://192.9.200.1/cfg/config1.sav . |
| 1.3.6.1.4.1.248.14.2.4.3 | ScalarhmFSLogFileName | read-write | current | Local or full specified url of the log file. If value is local, the log will be written to the flash. e.g. tftp://192.9.200.1/log/log300599.log or local. |
| 1.3.6.1.4.1.248.14.2.4.4 | ScalarhmFSUserName | read-write | current | login name for the used file transport protocol. |
| 1.3.6.1.4.1.248.14.2.4.5 | ScalarhmFSTPPassword | read-write | current | password for the used file transport protocol. |
| 1.3.6.1.4.1.248.14.2.4.6 | ScalarhmFSAction | read-write | current | This object, when read, always returns a value of other (1). When set to update (2), the updatefile specified by hmFSUpdFileName will be loaded. config-load (3… |
| 1.3.6.1.4.1.248.14.2.4.8 | ScalarhmFSActionResult | read-only | current | Result of the last activated action. |
| 1.3.6.1.4.1.248.14.2.4.9 | ScalarhmFSBootConfiguration | read-write | current | By setting this MIB variable the user can control which configuration should be read during system initialization: default(1) : boot with factory settings loca… |
| 1.3.6.1.4.1.248.14.2.4.10 | ScalarhmFSRunningConfiguration | read-write | current | By setting this MIB variable the user can control which configuration should be read after switch initialization: boot(1) : the one which is selected by hmFSBo… |
| 1.3.6.1.4.1.248.14.2.4.11 | ScalarhmFSLastMessage | read-only | current | error message of the last hmFSAction performed. If there was no error encountered, the value of this variable will be 'OK' |
| 1.3.6.1.4.1.248.14.2.4.12 | ScalarhmConfigurationStatus | read-only | current | Status of the local configuration. ok(1): Local and running configuration match. notInSync(2): Local and running configuration don't match, configuration has n… |
| 1.3.6.1.4.1.248.14.2.4.13 | ScalarhmConfigurationSignature | read-only | current | Signature of the stored configuration. The signature changes each time the configuration is saved. |
| 1.3.6.1.4.1.248.14.2.4.100 | TablehmFSFileTable | not-accessible | current | a directory of the internal file system |
| 1.3.6.1.4.1.248.14.2.4.100.1 | RowhmFSFileEntry | not-accessible | current | The entry of the hmFSFileTable. |
| 1.3.6.1.4.1.248.14.2.4.100.1.1 | ColumnhmFSFileID | read-only | current | This index is used to identify the associated file |
| 1.3.6.1.4.1.248.14.2.4.100.1.2 | ColumnhmFSFileName | read-only | current | file name excluding path |
| 1.3.6.1.4.1.248.14.2.4.100.1.3 | ColumnhmFSFileSize | read-only | current | file size in bytes |
| 1.3.6.1.4.1.248.14.2.4.100.1.4 | ColumnhmFSFileDate | read-only | current | date in UNIX format (seconds since 1 jan 1970) |
| 1.3.6.1.4.1.248.14.2.4.200 | NodehmAutoconfigGroup | |||
| 1.3.6.1.4.1.248.14.2.4.200.1 | ScalarhmAutoconfigAdapterStatus | read-only | current | Status of the AutoConfiguration Adapter. notPresent(1): AutoConfiguration Adapter has not been detected. removed(2): Configuration was loaded from adapter, but… |
| 1.3.6.1.4.1.248.14.2.4.200.2 | ScalarhmAutoconfigAdapterSerialNum | read-only | current | The serial number provided by vendor (ASCII). |
| 1.3.6.1.4.1.248.14.2.4.201 | NodehmConfigWatchdogGroup | |||
| 1.3.6.1.4.1.248.14.2.4.201.1 | ScalarhmConfigWatchdogAdminStatus | read-write | current | Administrative status of the configuration watchdog. enable(1): start/trigger the watchdog timer disable(2): turn off the watchdog This feature provides recove… |
| 1.3.6.1.4.1.248.14.2.4.201.2 | ScalarhmConfigWatchdogOperStatus | read-only | current | Operational status of the configuration watchdog. enable(1): watchdog up and running disable(2): watchdog inactive |
| 1.3.6.1.4.1.248.14.2.4.201.3 | ScalarhmConfigWatchdogTimeInterval | read-write | current | Period of the watchdog timer in seconds. |
| 1.3.6.1.4.1.248.14.2.4.201.4 | ScalarhmConfigWatchdogTimerValue | read-only | current | Current count-down value of the watchdog timer in seconds. |
| 1.3.6.1.4.1.248.14.2.4.201.5 | ScalarhmConfigWatchdogIPAddress | read-only | current | Current IP Adress of station that triggers the watchdog. |
| 1.3.6.1.4.1.248.14.2.5 | NodehmTempTable | |||
| 1.3.6.1.4.1.248.14.2.5.1 | ScalarhmTemperature | read-only | current | This signed integer is used to identify the temperature within the agent in units of centigrade (celsius). |
| 1.3.6.1.4.1.248.14.2.5.2 | ScalarhmTempUprLimit | read-write | current | This value is used to define a maximum level for the temperature within an agent. If the temperature rises above this upper limit, the management station will … |
| 1.3.6.1.4.1.248.14.2.5.3 | ScalarhmTempLwrLimit | read-write | current | This value is used to define a minimum level for the temperature within a concentrator. If the temperature falls below this lower limit, the management station… |
| 1.3.6.1.4.1.248.14.2.6 | TablehmNeighbourAgentTable | not-accessible | current | A list of the neighbour agents in a chassis |
| 1.3.6.1.4.1.248.14.2.6.1 | RowhmNeighbourAgentEntry | not-accessible | current | The entry of the hmNeighbourAgentTable. |
| 1.3.6.1.4.1.248.14.2.6.1.1 | ColumnhmNeighbourSlot | read-only | current | An index that uniquely identifies an agent by the slot in the chassis. |
| 1.3.6.1.4.1.248.14.2.6.1.2 | ColumnhmNeighbourIpAddress | read-only | current | The IP Address of the agent. |
| 1.3.6.1.4.1.248.14.2.7 | NodehmAuthGroup | |||
| 1.3.6.1.4.1.248.14.2.7.1 | ScalarhmAuthHostTableEntriesMax | read-only | current | The maximum possible number of entries in the hmAuthHostTable. This value equates to the total number of trusted Hosts which potentially may be recognized. |
| 1.3.6.1.4.1.248.14.2.7.2 | ScalarhmAuthCommTableEntriesMax | read-only | current | The maximum possible number of entries in the hmAuthCommTable. This value equates to the total number of communities which ly may be recognized. |
| 1.3.6.1.4.1.248.14.2.7.3 | TablehmAuthCommTable | not-accessible | current | A list of valid SNMP Community Entries. |
| 1.3.6.1.4.1.248.14.2.7.3.1 | RowhmAuthCommEntry | not-accessible | current | A list of SNMP Community properties. |
| 1.3.6.1.4.1.248.14.2.7.3.1.1 | ColumnhmAuthCommIndex | read-only | current | An index that uniquely identifies an ordered entry in the SNMP Community Table. |
| 1.3.6.1.4.1.248.14.2.7.3.1.2 | ColumnhmAuthCommName | read-write | current | The name of this SNMP Community Entry, e.g. public. This object can only be written. |
| 1.3.6.1.4.1.248.14.2.7.3.1.3 | ColumnhmAuthCommPerm | read-write | current | The Read/Write (GET/SET) permission for the community. A (1) indicates perm-ro (GET) permission. A (2) indicates perm-wr (GET/SET) permission. |
| 1.3.6.1.4.1.248.14.2.7.3.1.4 | ColumnhmAuthCommState | read-write | current | The state of this community entry. Enable (1) defines an entry that is valid. Disable (2) defines an entry that is valid but not enabled. Delete (3) removes an… |
| 1.3.6.1.4.1.248.14.2.7.4 | TablehmAuthHostTable | not-accessible | current | A list of valid SNMP Trusted Host Entries. |
| 1.3.6.1.4.1.248.14.2.7.4.1 | RowhmAuthHostEntry | not-accessible | current | A list of SNMP Host properties. |
| 1.3.6.1.4.1.248.14.2.7.4.1.1 | ColumnhmAuthHostIndex | read-only | current | An index that uniquely identifies an ordered entry in the SNMP Trusted Host Table. |
| 1.3.6.1.4.1.248.14.2.7.4.1.2 | ColumnhmAuthHostName | read-write | current | The name of this SNMP Trusted Host Entry, e.g. host1. |
| 1.3.6.1.4.1.248.14.2.7.4.1.3 | ColumnhmAuthHostCommIndex | read-write | current | The index of this SNMP Trusted Host Entry's community entry in the hmAuthCommTable. |
| 1.3.6.1.4.1.248.14.2.7.4.1.4 | ColumnhmAuthHostIpAddress | read-write | current | The IP Address for the host. This identified host has permission to access information in this device's MIB tables, providing the SNMP security toggle is on (s… |
| 1.3.6.1.4.1.248.14.2.7.4.1.5 | ColumnhmAuthHostIpMask | read-write | current | The Network Mask for the trusted Host entry. |
| 1.3.6.1.4.1.248.14.2.7.4.1.6 | ColumnhmAuthHostState | read-write | current | The state of this trusted host entry. Enable (1) defines an entry that is valid. Disable (2) defines an entry that is valid but not enabled. Delete (3) removes… |
| 1.3.6.1.4.1.248.14.2.8 | NodehmTrapGroup | |||
| 1.3.6.1.4.1.248.14.2.8.1 | ScalarhmTrapCommTableEntriesMax | read-only | current | The total number of entries in the hmTrapCommTable. This value equates to the total number of communities which potentially can be recognized. |
| 1.3.6.1.4.1.248.14.2.8.2 | ScalarhmTrapDestTableEntriesMax | read-only | current | The total number of entries in the hmTrapDestTable. This equates to the total number of hosts which can potentially be sent SNMP traps. |
| 1.3.6.1.4.1.248.14.2.8.3 | TablehmTrapCommTable | not-accessible | current | A list of valid SNMP Community Entries used for Traps. |
| 1.3.6.1.4.1.248.14.2.8.3.1 | RowhmTrapCommEntry | not-accessible | current | A list of SNMP Trap Community properties. |
| 1.3.6.1.4.1.248.14.2.8.3.1.1 | ColumnhmTrapCommIndex | read-only | current | An index that uniquely identifies an ordered entry in the SNMP Community Trap Table. |
| 1.3.6.1.4.1.248.14.2.8.3.1.2 | ColumnhmTrapCommCommIndex | read-write | current | The communities entry index of this SNMP Trap Community Entry. |
| 1.3.6.1.4.1.248.14.2.8.3.1.3 | ColumnhmTrapCommColdStart | read-write | current | Enable (1) or Disable (2) the SNMP ColdStart Trap for this SNMP community. |
| 1.3.6.1.4.1.248.14.2.8.3.1.4 | ColumnhmTrapCommLinkDown | read-write | current | Enable (1) or Disable (2) the SNMP Link Down traps for this SNMP community. |
| 1.3.6.1.4.1.248.14.2.8.3.1.5 | ColumnhmTrapCommLinkUp | read-write | current | Enable (1) or Disable (2) the SNMP Link Up traps for this SNMP community. |
| 1.3.6.1.4.1.248.14.2.8.3.1.6 | ColumnhmTrapCommAuthentication | read-write | current | Enable (1) or Disable (2) the SNMP Authentication traps for this SNMP community. |
| 1.3.6.1.4.1.248.14.2.8.3.1.7 | ColumnhmTrapCommBridge | read-write | current | Enable (1) or Disable (2) the SNMP Bridge MIB traps for this SNMP community. Available Traps: newRoot (MACH) topologyChange (MACH) |
| 1.3.6.1.4.1.248.14.2.8.3.1.8 | ColumnhmTrapCommRMON | read-write | current | Enable (1) or Disable (2) the SNMP RMON traps for this SNMP community. Available Traps: risingAlarm (MACH, MICE, RS2) fallingAlarm (MACH, MICE, RS2) |
| 1.3.6.1.4.1.248.14.2.8.3.1.9 | ColumnhmTrapCommUsergroup | read-write | current | Enable (1) or Disable (2) the SNMP Enterprise usergroup traps for this SNMP community. Available Traps: hmNewUserTrap (MACH) hmPortSecurityTrap (MACH, MICE, RS… |
| 1.3.6.1.4.1.248.14.2.8.3.1.10 | ColumnhmTrapCommDualHoming | read-write | current | Enable (1) or Disable (2) the SNMP Enterprise dual homing traps for this SNMP community. Available Traps: hmDuHmReconfig (MACH) hmDuHmRedundancy (MACH) hmRingR… |
| 1.3.6.1.4.1.248.14.2.8.3.1.11 | ColumnhmTrapCommChassis | read-write | current | Enable (1) or Disable (2) the SNMP Enterprise chassis traps for this SNMP community. Available Traps: hmGroupMapChange (MACH) hmPowerSupply (MACH, MICE, RS2) h… |
| 1.3.6.1.4.1.248.14.2.8.3.1.12 | ColumnhmTrapCommState | read-write | current | The state of this community entry. Enable (1) defines an entry that is valid. Disable (2) defines an entry that is valid but not enabled. Delete (3) removes an… |
| 1.3.6.1.4.1.248.14.2.8.4 | TablehmTrapDestTable | not-accessible | current | A list of valid SNMP Trap Trusted Host Destination entries. |
| 1.3.6.1.4.1.248.14.2.8.4.1 | RowhmTrapDestEntry | not-accessible | current | A list of SNMP Trap Trusted Host Destination properties. |
| 1.3.6.1.4.1.248.14.2.8.4.1.1 | ColumnhmTrapDestIndex | read-only | current | An index that uniquely identifies an ordered entry in the SNMP Trusted Host Destination Table. |
| 1.3.6.1.4.1.248.14.2.8.4.1.2 | ColumnhmTrapDestName | read-write | current | The name of this SNMP Trusted Host Destination Entry, e.g. Admin. |
| 1.3.6.1.4.1.248.14.2.8.4.1.3 | ColumnhmTrapDestCommIndex | read-write | current | The communities entry index of this SNMP Trusted Host Destination Entry's community. |
| 1.3.6.1.4.1.248.14.2.8.4.1.4 | ColumnhmTrapDestIpAddress | read-write | current | The IP Address for the host. This identified host has permission to access information in this device's MIB tables, providing the SNMP security toggle is on (s… |
| 1.3.6.1.4.1.248.14.2.8.4.1.5 | ColumnhmTrapDestIpMask | read-write | obsolete | The Network Mask for the trusted Host Destination entry. |
| 1.3.6.1.4.1.248.14.2.8.4.1.6 | ColumnhmTrapDestState | read-write | current | The state of this trusted trap destination entry. Enable (1) defines an entry that is valid. Disable (2) defines an entry that is valid but not enabled. Delete… |
| 1.3.6.1.4.1.248.14.2.9 | NodehmLastAccessGroup | |||
| 1.3.6.1.4.1.248.14.2.9.1 | ScalarhmLastIpAddr | read-only | current | IP Address specified in the last request. |
| 1.3.6.1.4.1.248.14.2.9.2 | ScalarhmLastPort | read-only | current | UDP port specified in the last request. |
| 1.3.6.1.4.1.248.14.2.9.3 | ScalarhmLastCommunity | read-only | current | Last community string used. |
| 1.3.6.1.4.1.248.14.2.9.4 | ScalarhmLastLoginUserName | read-only | current | Last login user name used. |
| 1.3.6.1.4.1.248.14.2.10 | NodehmMulticast | |||
| 1.3.6.1.4.1.248.14.2.10.1 | NodehmIGMPGroup | |||
| 1.3.6.1.4.1.248.14.2.10.1.2 | NodehmIGMPSnoop | |||
| 1.3.6.1.4.1.248.14.2.10.1.2.1 | ScalarhmIGMPSnoopStatus | read-write | current | Enables/disables IGMP Snooping on this device. The default value is disable. |
| 1.3.6.1.4.1.248.14.2.10.1.2.2 | ScalarhmIGMPSnoopAgingTime | read-write | current | The timeout period in seconds for aging out Multicast Groups dynamically learned with IGMP Snooping. Note that aging operates on a per interface per multicast … |
| 1.3.6.1.4.1.248.14.2.10.1.2.3 | ScalarhmIGMPSnoopUnknownMode | read-write | current | Sets the mode how unknown Multicast packets will be treated. The default value is flood(2). |
| 1.3.6.1.4.1.248.14.2.10.1.2.4 | ScalarhmIGMPSnoopUnknownAgingTime | read-write | current | The timeout period in seconds approximately for aging out Unknown Multicast Groups dynamically learned with traffic snooping. The exactly value is UnknownLooku… |
| 1.3.6.1.4.1.248.14.2.10.1.2.5 | ScalarhmIGMPSnoopUnknownLookupInterval | read-write | current | The frequency at which Unknown Multicast Groups dynamically learned with traffic snooping are traffic checked by the switch in seconds. So this is the time bet… |
| 1.3.6.1.4.1.248.14.2.10.1.2.6 | ScalarhmIGMPSnoopUnknownLookupResponseTime | read-write | current | The unknown lookup response time in seconds in which Unknown Multicast Groups dynamically learned with traffic snooping are traffic checked. So this is the tim… |
| 1.3.6.1.4.1.248.14.2.10.1.2.7 | ScalarhmIGMPSnoopQuerierToPortmask | read-write | current | Enables or disables the addition of query ports to multicast filter portmasks. |
| 1.3.6.1.4.1.248.14.2.10.1.2.8 | ScalarhmIGMPSnoopQuerierIPAddress | read-only | current | Shows the IP address of the active querier. |
| 1.3.6.1.4.1.248.14.2.10.1.2.10 | TablehmIGMPSnoopQueryTable | not-accessible | current | A table displaying the IGMP Router Query PDU ports. |
| 1.3.6.1.4.1.248.14.2.10.1.2.10.1 | RowhmIGMPSnoopQueryEntry | not-accessible | current | A table displaying the IGMP Router Query PDU ports. These are maintained on a per VLAN basis. |
| 1.3.6.1.4.1.248.14.2.10.1.2.10.1.1 | ColumnhmIGMPSnoopQueryVlanIndex | not-accessible | current | This is the VLAN index for which this entry is valid. If the switch only supports shared vlan learning (SVL), the value is always 1 and there is only 1 instanc… |
| 1.3.6.1.4.1.248.14.2.10.1.2.10.1.2 | ColumnhmIGMPSnoopQueryPorts | read-only | current | This read-only object displays the set of ports that have received IGMP Router Query PDUs for this VLAN as determined by the IGMP Snooping task. |
| 1.3.6.1.4.1.248.14.2.10.1.2.11 | TablehmIGMPSnoopFilterTable | not-accessible | current | A table containing the multicast filtering information on a per vlan basis learned with IGMP Snooping. |
| 1.3.6.1.4.1.248.14.2.10.1.2.11.1 | RowhmIGMPSnoopFilterEntry | not-accessible | current | The entry of the hmIGMPSnoopFilterTable. |
| 1.3.6.1.4.1.248.14.2.10.1.2.11.1.1 | ColumnhmIGMPSnoopFilterVlanIndex | not-accessible | current | This is the VLAN index for which this entry is valid. If the switch only supports shared vlan learning (SVL), the value is always 1 and there is only 1 instanc… |
| 1.3.6.1.4.1.248.14.2.10.1.2.11.1.2 | ColumnhmIGMPSnoopFilterAddress | not-accessible | current | The multicast destination MAC address in a frame to which this entry's filtering information applies. |
| 1.3.6.1.4.1.248.14.2.10.1.2.11.1.3 | ColumnhmIGMPSnoopFilterLearntPorts | read-only | current | The set of ports, to which frames destined for this Group MAC Address learned by IGMP Snooping are currently being forwarded. Each octet within the value of th… |
| 1.3.6.1.4.1.248.14.2.10.1.2.12 | TablehmIGMPSnoopForwardAllTable | not-accessible | current | A table containing forwarding information for each VLAN, specifying the set of ports to which forwarding of all multicasts applies, configured statically by ma… |
| 1.3.6.1.4.1.248.14.2.10.1.2.12.1 | RowhmIGMPSnoopForwardAllEntry | not-accessible | current | Forwarding information for a VLAN, specifying the set of ports to which all multicasts should be forwarded, configured statically by management. |
| 1.3.6.1.4.1.248.14.2.10.1.2.12.1.1 | ColumnhmIGMPSnoopForwardAllVlanIndex | not-accessible | current | This is the VLAN index for which this entry is valid. If the switch only supports shared vlan learning (SVL), the value is always 1 and there is only 1 instanc… |
| 1.3.6.1.4.1.248.14.2.10.1.2.12.1.2 | ColumnhmIGMPSnoopForwardAllStaticPorts | read-write | current | The set of ports configured by management in this VLAN to which all multicast group-addressed frames learned by IGMP are to be forwarded. This value will be re… |
| 1.3.6.1.4.1.248.14.2.10.1.2.13 | TablehmIGMPSnoopQueryStaticTable | not-accessible | current | A table displaying the IGMP Static Query ports. |
| 1.3.6.1.4.1.248.14.2.10.1.2.13.1 | RowhmIGMPSnoopQueryStaticEntry | not-accessible | current | The entry of the hmIGMPSnoopQueryStaticTable. |
| 1.3.6.1.4.1.248.14.2.10.1.2.13.1.1 | ColumnhmIGMPSnoopQueryStaticVlanIndex | not-accessible | current | This is the VLAN index for which this entry is valid. If the switch only supports shared vlan learning (SVL), the value is always 1 and there is only 1 instanc… |
| 1.3.6.1.4.1.248.14.2.10.1.2.13.1.2 | ColumnhmIGMPSnoopQueryStaticPorts | read-write | current | The set of ports explicitly configured by management to be IGMP-forwarding ports. |
| 1.3.6.1.4.1.248.14.2.10.1.2.13.1.3 | ColumnhmIGMPSnoopQueryStaticAutomaticPorts | read-only | current | The set of ports that are automatically learned by LLDP protocol to be IGMP-forwarding ports. |
| 1.3.6.1.4.1.248.14.2.10.1.2.13.1.4 | ColumnhmIGMPSnoopQueryStaticAutomaticPortsEnable | read-write | current | The set of ports that are allowed to be learned automatically by LLDP protocol to be IGMP-forwarding ports. |
| 1.3.6.1.4.1.248.14.2.10.1.2.100 | NodehmIGMPQuerierGroup | |||
| 1.3.6.1.4.1.248.14.2.10.1.2.100.1 | ScalarhmIGMPQuerierStatus | read-write | current | Enables/disables IGMP Querier on this device. IGMP queries are only sent when hmIGMPSnoopStatus is also set. The default value is disable. |
| 1.3.6.1.4.1.248.14.2.10.1.2.100.2 | ScalarhmIGMPQuerierMode | read-only | current | Shows the current mode of the IGMP Querier. |
| 1.3.6.1.4.1.248.14.2.10.1.2.100.3 | ScalarhmIGMPQuerierTransmitInterval | read-write | current | The frequency at which IGMP general query packets are transmitted by the querying switch in seconds. So this is the time between general periodic queries being… |
| 1.3.6.1.4.1.248.14.2.10.1.2.100.4 | ScalarhmIGMPQuerierMaxResponseTime | read-write | current | The maximum query response time in seconds advertised in IGMP v2 queries on this VLAN if the switch is the querier. Smaller values allow a switch to prune grou… |
| 1.3.6.1.4.1.248.14.2.10.1.2.100.5 | ScalarhmIGMPQuerierProtocolVersion | read-write | current | The Querier protocol version. The default is version 2. |
| 1.3.6.1.4.1.248.14.2.10.2 | NodehmGMRPGroup | |||
| 1.3.6.1.4.1.248.14.2.10.2.1 | NodehmGMRP | |||
| 1.3.6.1.4.1.248.14.2.10.2.1.1 | ScalarhmGmrpUnknownMode | read-write | current | Sets the mode how unknown multicast packets will be treated. The default value is flood(2). |
| 1.3.6.1.4.1.248.14.2.11 | NodehmRelayGroup | |||
| 1.3.6.1.4.1.248.14.2.11.1 | ScalarhmRelayOption82Status | read-write | current | Enables/disables the DHCP Option 82 defined in RFC 3046 on this device. |
| 1.3.6.1.4.1.248.14.2.11.2 | ScalarhmRelayOptionRemoteIDType | read-write | current | This option determines the content of the Agent Remote ID (sub-option 2). ip(1) inserts the ip address of the relay's mgmt-interface and encodes it with sub op… |
| 1.3.6.1.4.1.248.14.2.11.3 | ScalarhmRelayOptionRemoteID | read-only | current | Displays the actual content of the Remote ID sub option for this relay agent. The value is encoded in TLV (Type-Length-Value) format. The following type values… |
| 1.3.6.1.4.1.248.14.2.11.4 | ScalarhmRelayOptionRemoteIDValue | read-write | current | Contains an octet string to be used as value for Agent Remote ID Sub-option type A3 |
| 1.3.6.1.4.1.248.14.2.11.10 | NodehmRelayServerGroup | |||
| 1.3.6.1.4.1.248.14.2.11.10.1 | ScalarhmRelayDHCPServerIpAddr | read-write | obsolete | This object is 'obsolete' and is replaced by hmRelayServerAddrEntry. The IP address of the first DHCP-server to be addressed by the relay agent. If 0.0.0.0, DH… |
| 1.3.6.1.4.1.248.14.2.11.10.2 | ScalarhmRelayDHCPServer2IpAddr | read-write | obsolete | This object is 'obsolete' and is replaced by hmRelayServerAddrEntry. The IP address of the second DHCP-server to be addressed by the relay agent. If 0.0.0.0, D… |
| 1.3.6.1.4.1.248.14.2.11.10.3 | ScalarhmRelayDHCPServer3IpAddr | read-write | obsolete | This object is 'obsolete' and is replaced by hmRelayServerAddrEntry. The IP address of the third DHCP-server to be addressed by the relay agent. If 0.0.0.0, DH… |
| 1.3.6.1.4.1.248.14.2.11.10.4 | ScalarhmRelayDHCPServer4IpAddr | read-write | obsolete | This object is 'obsolete' and is replaced by hmRelayServerAddrEntry. The IP address of the fourth DHCP-server to be addressed by the relay agent. If 0.0.0.0, D… |
| 1.3.6.1.4.1.248.14.2.11.11 | TablehmRelayInterfaceTable | not-accessible | current | This table contains variables for each interface of the switch. |
| 1.3.6.1.4.1.248.14.2.11.11.1 | RowhmRelayInterfaceEntry | not-accessible | current | The entry of the hmRelayInterfaceTable. |
| 1.3.6.1.4.1.248.14.2.11.11.1.1 | ColumnhmRelayIfaceGroupID | read-only | current | index to identify an interface card. This value is never greater than hmSysGroupCapacity. |
| 1.3.6.1.4.1.248.14.2.11.11.1.2 | ColumnhmRelayIfaceID | read-only | current | index to identify an interface within an interface card. |
| 1.3.6.1.4.1.248.14.2.11.11.1.3 | ColumnhmRelayIfaceOption82Enable | read-write | current | Enable or disable DHCP Option 82 on this physical port. |
| 1.3.6.1.4.1.248.14.2.11.11.1.4 | ColumnhmRelayIfaceBCRequestFwd | read-write | current | Enable or disable relaying of incoming broadcasted BOOTP/DHCP request packets on this physical port. Hirschmann Multicast BOOTP/DHCP requests will always be re… |
| 1.3.6.1.4.1.248.14.2.11.11.1.5 | ColumnhmRelayIfaceCircuitID | read-only | current | Contains the actual Circuit ID sub option for this interface of the relay agent. It is a best guess value, since some information is not known before the actua… |
| 1.3.6.1.4.1.248.14.2.11.11.1.6 | ColumnhmRelayIfaceDhcpRelayAdminState | read-write | current | Enable or disable DHCP Relay Agent on this physical port. |
| 1.3.6.1.4.1.248.14.2.11.11.1.7 | ColumnhmRelayIfaceDhcpRelayOperState | read-only | current | Current active DHCP protocol on this physical port. |
| 1.3.6.1.4.1.248.14.2.11.12 | TablehmRelayServerAddrTable | not-accessible | current | This table contains objects to configure DHCP Servers. |
| 1.3.6.1.4.1.248.14.2.11.12.1 | RowhmRelayServerAddrEntry | not-accessible | current | The DHCP Server objects. |
| 1.3.6.1.4.1.248.14.2.11.12.1.1 | ColumnhmRelayServerAddrIndex | not-accessible | current | Index for server table. |
| 1.3.6.1.4.1.248.14.2.11.12.1.2 | ColumnhmRelayServerAddr | read-create | current | The address of the external DHCP server. |
| 1.3.6.1.4.1.248.14.2.11.12.1.3 | ColumnhmRelayServerInterface | read-create | current | If an Interface is set, only DHCP packets from this interface are relayed to the server. |
| 1.3.6.1.4.1.248.14.2.11.12.1.4 | ColumnhmRelayServerRowStatus | read-create | current | Indicates the status of an entry in this table, and is used to create/delete entries. Objects within this table can by changed while the status is 'active'. |
| 1.3.6.1.4.1.248.14.2.11.20 | ScalarhmRelayBCPktInCnt | read-only | current | The number of BOOTP/DHCP broadcast request packets received by the relay agent. |
| 1.3.6.1.4.1.248.14.2.11.21 | ScalarhmRelayMCPktInCnt | read-only | current | The number of BOOTP/DHCP multicast request packets received by the relay agent. |
| 1.3.6.1.4.1.248.14.2.11.22 | ScalarhmRelayPktServerRelayCnt | read-only | current | The number of BOOTP/DHCP requests relayed to the DHCP Server. |
| 1.3.6.1.4.1.248.14.2.11.23 | ScalarhmRelayPktClientRelayCnt | read-only | current | The number of BOOTP/DHCP replies relayed to the Client. |
| 1.3.6.1.4.1.248.14.2.11.24 | ScalarhmRelayErrCnt | read-only | current | The number of errors encountered within the relay agent. |
| 1.3.6.1.4.1.248.14.2.11.25 | ScalarhmRelayLastDuplicateIP | read-only | current | The last duplicate ip address encounterd by the relay agent. |
| 1.3.6.1.4.1.248.14.2.12 | NodehmDeviceMonitoringGroup | |||
| 1.3.6.1.4.1.248.14.2.12.1 | TablehmSigConConfigTable | not-accessible | current | This table contains all variables to configure the behaviour of the signalling contacts. |
| 1.3.6.1.4.1.248.14.2.12.1.1 | RowhmSigConConfigEntry | not-accessible | current | The entry of the hmSigConConfigTable. |
| 1.3.6.1.4.1.248.14.2.12.1.1.1 | ColumnhmSigConID | read-only | current | This index is used to identify the associated signalling contact. |
| 1.3.6.1.4.1.248.14.2.12.1.1.2 | ColumnhmSigConTrapEnable | read-write | current | Determines wether a trap shall be sent or not, when the signal contact operating state changes. |
| 1.3.6.1.4.1.248.14.2.12.1.1.3 | ColumnhmSigConTrapCause | read-only | current | This object identifies the cause for a trap. The index of the entity which produces the trap is specified by hmSigConTrapCauseIndex. |
| 1.3.6.1.4.1.248.14.2.12.1.1.4 | ColumnhmSigConTrapCauseIndex | read-only | current | This attribute specifies the entity which produces the trap. 1 - n: index of powersupply table / interfaces table 0: other errors |
| 1.3.6.1.4.1.248.14.2.12.1.1.5 | ColumnhmSigConMode | read-write | current | This attribute specifies the behaviour of the relay contact. The factory settings for signal contact 1 is monitoring the correct operation of entries specified… |
| 1.3.6.1.4.1.248.14.2.12.1.1.6 | ColumnhmSigConManualActivate | read-write | current | When operating in manual mode, the signal contact state can be set by this attribute. |
| 1.3.6.1.4.1.248.14.2.12.1.1.7 | ColumnhmSigConOperState | read-only | current | This attribute shows the current operating state of the signal contact. |
| 1.3.6.1.4.1.248.14.2.12.1.1.8 | ColumnhmSigConSenseLinkFailure | read-write | current | Sets the monitoring of the network connection(s). |
| 1.3.6.1.4.1.248.14.2.12.1.1.9 | ColumnhmSigConSenseControlLine | read-write | current | Sets the monitoring of the ring/network coupling. |
| 1.3.6.1.4.1.248.14.2.12.1.1.10 | ColumnhmSigConSenseRedNotGuaranteed | read-write | current | Sets the monitoring of the HIPER-Ring, MRP-Ring or Fast HIPER-Ring. |
| 1.3.6.1.4.1.248.14.2.12.1.1.11 | ColumnhmSigConSensePS1State | read-write | current | Sets the monitoring of the power supply 1. |
| 1.3.6.1.4.1.248.14.2.12.1.1.12 | ColumnhmSigConSensePS2State | read-write | current | Sets the monitoring of the power supply 2. |
| 1.3.6.1.4.1.248.14.2.12.1.1.13 | ColumnhmSigConSenseTemperature | read-write | current | Sets the monitoring of the device temperature. |
| 1.3.6.1.4.1.248.14.2.12.1.1.14 | ColumnhmSigConSenseModuleRemoval | read-write | current | Sets the monitoring of module removal (platform dependant). |
| 1.3.6.1.4.1.248.14.2.12.1.1.15 | ColumnhmSigConSenseACARemoval | read-write | current | Sets the monitoring of the auto configuration adapter removal. |
| 1.3.6.1.4.1.248.14.2.12.1.1.16 | ColumnhmSigConSensePS3State | read-write | current | Sets the monitoring of the power supply 3 (platform dependant). |
| 1.3.6.1.4.1.248.14.2.12.1.1.17 | ColumnhmSigConSensePS4State | read-write | current | Sets the monitoring of the power supply 4 (platform dependant). |
| 1.3.6.1.4.1.248.14.2.12.1.1.18 | ColumnhmSigConSenseFan1State | read-write | current | Sets the monitoring of the cooling fan (platform dependant). |
| 1.3.6.1.4.1.248.14.2.12.1.1.19 | ColumnhmSigConSensePS5State | read-write | current | Sets the monitoring of the power supply 5 (platform dependant). |
| 1.3.6.1.4.1.248.14.2.12.1.1.20 | ColumnhmSigConSensePS6State | read-write | current | Sets the monitoring of the power supply 6 (platform dependant). |
| 1.3.6.1.4.1.248.14.2.12.1.1.21 | ColumnhmSigConSensePS7State | read-write | current | Sets the monitoring of the power supply 7 (platform dependant). |
| 1.3.6.1.4.1.248.14.2.12.1.1.22 | ColumnhmSigConSensePS8State | read-write | current | Sets the monitoring of the power supply 8 (platform dependant). |
| 1.3.6.1.4.1.248.14.2.12.1.1.23 | ColumnhmSigConSenseACANotInSync | read-write | current | Sets the monitoring whether the configuration on ACA is in sync with the configuration in NVRAM. |
| 1.3.6.1.4.1.248.14.2.12.1.1.24 | ColumnhmSigConSenseSRedNotGuaranteed | read-write | current | Sets the monitoring of sub-rings if configured and activated on the device. |
| 1.3.6.1.4.1.248.14.2.12.2 | TablehmSigConLinkTable | not-accessible | current | This table contains all variables to mask an alarm for the signalling relay, produced by a link. The index for a link corresponds with ifMauIfIndex. The table … |
| 1.3.6.1.4.1.248.14.2.12.2.1 | RowhmSigConLinkEntry | not-accessible | current | The entry of the hmSigConLinkTable. |
| 1.3.6.1.4.1.248.14.2.12.2.1.1 | ColumnhmSigConLinkID | read-only | current | This index is used to identify the associated link and corresponds with ifMauIfIndex. |
| 1.3.6.1.4.1.248.14.2.12.2.1.2 | ColumnhmSigConLinkAlarm | read-write | current | Indicates whether an alarm for the signalling relay of the associated link will be produced or not, so you can mask the value of ifMauMediaAvailable. |
| 1.3.6.1.4.1.248.14.2.12.3 | TablehmDevMonConfigTable | not-accessible | current | This table contains all variables to configure the behaviour of the device state. |
| 1.3.6.1.4.1.248.14.2.12.3.1 | RowhmDevMonConfigEntry | not-accessible | current | Configuration of the device monitoring. |
| 1.3.6.1.4.1.248.14.2.12.3.1.1 | ColumnhmDevMonID | read-only | current | This index is used to identify the associated device status (currently only one). |
| 1.3.6.1.4.1.248.14.2.12.3.1.2 | ColumnhmDevMonTrapEnable | read-write | current | Determines wether a trap shall be sent or not, when the device monitoring state changes. |
| 1.3.6.1.4.1.248.14.2.12.3.1.3 | ColumnhmDevMonTrapCause | read-only | current | This object identifies the cause for a trap. The index of the entity which produces the trap is specified by hmDevMonTrapCauseIndex. |
| 1.3.6.1.4.1.248.14.2.12.3.1.4 | ColumnhmDevMonTrapCauseIndex | read-only | current | This attribute specifies the entity which produces the trap. 1 - n: index of powersupply table / interfaces table 0: other errors |
| 1.3.6.1.4.1.248.14.2.12.3.1.5 | ColumnhmDevMonSwitchState | read-only | current | This attribute shows the current state of the device monitoring. |
| 1.3.6.1.4.1.248.14.2.12.3.1.6 | ColumnhmDevMonSenseLinkFailure | read-write | current | Sets the monitoring of the network connection(s). |
| 1.3.6.1.4.1.248.14.2.12.3.1.7 | ColumnhmDevMonSenseControlLine | read-write | current | Sets the monitoring of the ring/network coupling. |
| 1.3.6.1.4.1.248.14.2.12.3.1.8 | ColumnhmDevMonSenseRedNotGuaranteed | read-write | current | Sets the monitoring of the HIPER-Ring, MRP-Ring or Fast HIPER-Ring. |
| 1.3.6.1.4.1.248.14.2.12.3.1.9 | ColumnhmDevMonSensePS1State | read-write | current | Sets the monitoring of the power supply 1. |
| 1.3.6.1.4.1.248.14.2.12.3.1.10 | ColumnhmDevMonSensePS2State | read-write | current | Sets the monitoring of the power supply 2. |
| 1.3.6.1.4.1.248.14.2.12.3.1.11 | ColumnhmDevMonSenseTemperature | read-write | current | Sets the monitoring of the device temperature. |
| 1.3.6.1.4.1.248.14.2.12.3.1.12 | ColumnhmDevMonSenseModuleRemoval | read-write | current | Sets the monitoring of module removal (platform dependant). |
| 1.3.6.1.4.1.248.14.2.12.3.1.13 | ColumnhmDevMonSenseACARemoval | read-write | current | Sets the monitoring of the auto configuration adapter removal. |
| 1.3.6.1.4.1.248.14.2.12.3.1.14 | ColumnhmDevMonSensePS3State | read-write | current | Sets the monitoring of the power supply 3 (platform dependant). |
| 1.3.6.1.4.1.248.14.2.12.3.1.15 | ColumnhmDevMonSensePS4State | read-write | current | Sets the monitoring of the power supply 4 (platform dependant). |
| 1.3.6.1.4.1.248.14.2.12.3.1.16 | ColumnhmDevMonSenseFan1State | read-write | current | Sets the monitoring of the cooling fan (platform dependant). |
| 1.3.6.1.4.1.248.14.2.12.3.1.17 | ColumnhmDevMonSensePS5State | read-write | current | Sets the monitoring of the power supply 5 (platform dependant). |
| 1.3.6.1.4.1.248.14.2.12.3.1.18 | ColumnhmDevMonSensePS6State | read-write | current | Sets the monitoring of the power supply 6 (platform dependant). |
| 1.3.6.1.4.1.248.14.2.12.3.1.19 | ColumnhmDevMonSensePS7State | read-write | current | Sets the monitoring of the power supply 7 (platform dependant). |
| 1.3.6.1.4.1.248.14.2.12.3.1.20 | ColumnhmDevMonSensePS8State | read-write | current | Sets the monitoring of the power supply 8 (platform dependant). |
| 1.3.6.1.4.1.248.14.2.12.3.1.21 | ColumnhmDevMonSenseACANotInSync | read-write | current | Sets the monitoring whether the configuration on ACA is in sync with the configuration in NVRAM. |
| 1.3.6.1.4.1.248.14.2.12.3.1.22 | ColumnhmDevMonSenseSRedNotGuaranteed | read-write | current | Sets the monitoring of sub-rings if configured and activated on the device. |
| 1.3.6.1.4.1.248.14.2.13 | NodehmAgentSnmpConfigGroup | |||
| 1.3.6.1.4.1.248.14.2.13.1 | ScalarhmAgentSnmpCommunityCreate | read-write | current | Creates a new SNMP Community entry. Defaults: IPAddress 0.0.0.0 IpMask 0.0.0.0 AccessMode read-only Status config |
| 1.3.6.1.4.1.248.14.2.13.2 | TablehmAgentSnmpCommunityConfigTable | not-accessible | current | A table of the switch's SNMP Config entries |
| 1.3.6.1.4.1.248.14.2.13.2.1 | RowhmAgentSnmpCommunityConfigEntry | not-accessible | current | Switch's SNMP Config entry |
| 1.3.6.1.4.1.248.14.2.13.2.1.1 | ColumnhmAgentSnmpCommunityIndex | read-only | current | The switch's Snmp Community Index |
| 1.3.6.1.4.1.248.14.2.13.2.1.2 | ColumnhmAgentSnmpCommunityName | read-write | current | The switch's Snmp Community Name This name identifies each SNMP community; the name can be up to 32 characters, and it is case-sensitive. Community names in th… |
| 1.3.6.1.4.1.248.14.2.13.2.1.3 | ColumnhmAgentSnmpCommunityIPAddress | read-write | current | The switch's Snmp Community IP Address Client IP Address - This attribute is an IP address (or portion thereof) from which this device will accept SNMP packets… |
| 1.3.6.1.4.1.248.14.2.13.2.1.4 | ColumnhmAgentSnmpCommunityIPMask | read-write | current | The switch's Snmp Community IP Mask Client IP Mask - This attribute is a mask to be logical-ANDed with the requesting entity's IP address before comparison wit… |
| 1.3.6.1.4.1.248.14.2.13.2.1.5 | ColumnhmAgentSnmpCommunityAccessMode | read-write | current | The switch's Snmp Community Access Mode Access Mode - This value can be read-only or read/write. A community with a read-only access allows for switch informat… |
| 1.3.6.1.4.1.248.14.2.13.2.1.6 | ColumnhmAgentSnmpCommunityStatus | read-write | current | The switch's Snmp Community Status. active(1) - This community is active, allowing SNMP managers associated with this community to manage the switch according … |
| 1.3.6.1.4.1.248.14.2.13.3 | ScalarhmAgentSnmpTrapReceiverCreate | read-write | current | Creates a new trap receiver entry. Defaults: IPAddress 0.0.0.0 status config |
| 1.3.6.1.4.1.248.14.2.13.4 | TablehmAgentSnmpTrapReceiverConfigTable | not-accessible | current | Trap messages are sent across a network to an SNMP Network Manager. These messages alert the manager to events occurring within the switch or on the network. U… |
| 1.3.6.1.4.1.248.14.2.13.4.1 | RowhmAgentSnmpTrapReceiverConfigEntry | not-accessible | current | Switch's Snmp Trace Receiver Config entry |
| 1.3.6.1.4.1.248.14.2.13.4.1.1 | ColumnhmAgentSnmpTrapReceiverIndex | read-only | current | The switch's Snmp Trap Receiver Index |
| 1.3.6.1.4.1.248.14.2.13.4.1.2 | ColumnhmAgentSnmpTrapReceiverCommunityName | read-write | current | The switch's Snmp Trap Receiver Community Name. This is the SNMP community name of the remote network manager; the name can be up to 16 characters, and is case… |
| 1.3.6.1.4.1.248.14.2.13.4.1.3 | ColumnhmAgentSnmpTrapReceiverIPAddress | read-write | current | IP Address - Each IP address parameter is four integer numbers. The numbers range from 0 to 255. |
| 1.3.6.1.4.1.248.14.2.13.4.1.4 | ColumnhmAgentSnmpTrapReceiverStatus | read-write | current | The switch's Snmp Trap Reciever Status. active(1) - This trap receiver is active, allowing SNMP Traps to be sent to this receiver. notInService(2) - This trap … |
| 1.3.6.1.4.1.248.14.2.13.5 | NodehmAgentSnmpTrapFlagsConfigGroup | |||
| 1.3.6.1.4.1.248.14.2.13.5.1 | ScalarhmAgentSnmpAuthenticationTrapFlag | read-write | current | Authentication Flag - Enable/Disable authentication Flag. |
| 1.3.6.1.4.1.248.14.2.13.5.2 | ScalarhmAgentSnmpLinkUpDownTrapFlag | read-write | current | Link Up/Down Flag - Enable/Disable Link Up/Link Down traps for the entire switch. When set to Enable, the Link Up/Down traps will be sent only if the Link Trap… |
| 1.3.6.1.4.1.248.14.2.13.5.3 | ScalarhmAgentSnmpMultipleUsersTrapFlag | read-write | current | Multiple Users Flag - Enable/Disable Multiple User traps. When the value is set to Enable, a Multiple User Trap is sent whenever someone logs in to the termina… |
| 1.3.6.1.4.1.248.14.2.13.5.4 | ScalarhmAgentSnmpSpanningTreeTrapFlag | read-write | current | Spanning Tree Flag - This flag enables the sending of new root traps and topology change notification traps. |
| 1.3.6.1.4.1.248.14.2.13.5.5 | ScalarhmAgentSnmpBroadcastStormTrapFlag | read-write | current | Broadcast Storm Flag - This flag enables or disables the broadcast storm trap. You must also enable Broadcast Storm Recovery Mode (see the Switch Configuration… |
| 1.3.6.1.4.1.248.14.2.13.5.6 | ScalarhmAgentSnmpChassisTrapFlag | read-write | current | Chassis Flag - Enable/Disable traps for hmTemperatureTrap hmModuleMapChange hmPowerSupplyTrap hmAutoconfigAdapterTrap |
| 1.3.6.1.4.1.248.14.2.13.5.7 | ScalarhmAgentSnmpL2RedundancyTrapFlag | read-write | current | Chassis Flag - Enable/Disable traps hmRingRedReconfig and hmRingCplReconfig |
| 1.3.6.1.4.1.248.14.2.13.5.8 | ScalarhmAgentSnmpPortSecurityTrapFlag | read-write | current | PortSecurity Flag - enable/disable all port security traps. |
| 1.3.6.1.4.1.248.14.2.13.6 | ScalarhmAgentSnmpCommunityMaxEntries | read-only | current | Max number of Entries in hmAgentSnmpCommunityConfigEntry |
| 1.3.6.1.4.1.248.14.2.13.7 | ScalarhmAgentSnmpTrapReceiverMaxEntries | read-only | current | Max number of Entries in hmAgentSnmpTrapReceiverConfigEntry |
| 1.3.6.1.4.1.248.14.2.13.8 | NodehmAgentSnmpLoggingGroup | |||
| 1.3.6.1.4.1.248.14.2.13.8.1 | ScalarhmAgentSnmpLogGetRequest | read-write | current | Enable logging of SNMP GET requests. |
| 1.3.6.1.4.1.248.14.2.13.8.2 | ScalarhmAgentSnmpLogSetRequest | read-write | current | Enable logging of SNMP SET requests. |
| 1.3.6.1.4.1.248.14.2.13.8.3 | ScalarhmAgentSnmpLogGetSeverity | read-write | current | Define the log severity for SNMP GET requests. |
| 1.3.6.1.4.1.248.14.2.13.8.4 | ScalarhmAgentSnmpLogSetSeverity | read-write | current | Define the log severity for SNMP SET requests. |
| 1.3.6.1.4.1.248.14.2.14 | NodehmPOEGroup | |||
| 1.3.6.1.4.1.248.14.2.14.1 | NodehmPOEGlobalGroup | |||
| 1.3.6.1.4.1.248.14.2.14.1.1 | ScalarhmPOEStatus | read-write | current | Enables/disables Power over Ethernet on this device. The default value is enable. |
| 1.3.6.1.4.1.248.14.2.14.1.2 | ScalarhmPOEScanning | read-write | current | Enables/disables port scanning on this device. The default value is enable. |
| 1.3.6.1.4.1.248.14.2.14.1.3 | ScalarhmPOEReservedPower | read-only | current | Reserved system power for active Power over Ethernet ports in Watts. |
| 1.3.6.1.4.1.248.14.2.14.1.4 | ScalarhmPOEFastStartup | read-write | current | Enables/disables Fast Power over Ethernet on this device. The default value is disabled. |
| 1.3.6.1.4.1.248.14.2.14.2 | TablehmPOEPortTable | not-accessible | current | This table contains variables for each Power over Ethernet interface of the switch. |
| 1.3.6.1.4.1.248.14.2.14.2.1 | RowhmPOEPortEntry | not-accessible | current | The entry of the hmPOEPortTable. |
| 1.3.6.1.4.1.248.14.2.14.2.1.1 | ColumnhmPOEPortIndex | read-only | current | Index to identify an Power over Ethernet interface. |
| 1.3.6.1.4.1.248.14.2.14.2.1.2 | ColumnhmPOEPortConsumptionPower | read-only | current | Measured usage power per interface expressed in Milliwatts. |
| 1.3.6.1.4.1.248.14.2.14.2.1.3 | ColumnhmPOEPortMaxConsumptionPower | read-only | current | The maximum observed power consumption (hmPOEPortConsumptionPower) value expressed in milliwatts used by the PD. The value is reset to 0 if the PoE admin state… |
| 1.3.6.1.4.1.248.14.2.14.2.1.4 | ColumnhmPOEPortPowerLimit | read-write | current | The power limit per port expressed in milliwatts. If set to zero the power consumption limitation is disabled. |
| 1.3.6.1.4.1.248.14.2.14.3 | TablehmPOEModuleTable | not-accessible | current | This table contains objects for each plugged PoE+ module of the switch. If the device is non-modular and supports PoE+ it contains only one entry. |
| 1.3.6.1.4.1.248.14.2.14.3.1 | RowhmPOEModuleEntry | not-accessible | current | The entries of the hmPOEModuleTable. |
| 1.3.6.1.4.1.248.14.2.14.3.1.1 | ColumnhmPOEModuleIndex | read-only | current | Slot number of the plugged PoE+ module. |
| 1.3.6.1.4.1.248.14.2.14.3.1.2 | ColumnhmPOEModulePower | read-write | current | Configurable power budget per module expressed in Watts. The default value is hmPOEModuleMaximumPower and depends on the hardware. |
| 1.3.6.1.4.1.248.14.2.14.3.1.3 | ColumnhmPOEModuleMaximumPower | read-only | current | Maximum available power budget per module expressed in Watts. This value depends on the device or module. |
| 1.3.6.1.4.1.248.14.2.14.3.1.4 | ColumnhmPOEModuleReservedPower | read-only | current | The reserved power (depending on actual power classes) per module expressed in Watts. |
| 1.3.6.1.4.1.248.14.2.14.3.1.5 | ColumnhmPOEModuleDeliveredPower | read-only | current | The measured usage power per module expressed in Watts. |
| 1.3.6.1.4.1.248.14.2.14.3.1.6 | ColumnhmPOEModuleUsageThreshold | read-write | current | The usage power threshold per module expressed in percent. If this threshold is exceeded a alarm is initiated. |
| 1.3.6.1.4.1.248.14.2.14.3.1.7 | ColumnhmPOEModuleNotificationControlEnable | read-write | current | This object controls, on a per-module basis, whether or not notifications from the agent are enabled. |
| 1.3.6.1.4.1.248.14.2.15 | NodehmSwitchResources | |||
| 1.3.6.1.4.1.248.14.2.15.1 | ScalarhmEnableMeasurement | read-write | current | Enable or disable the resources measurement If disabled, the task - needed for measurement - is also deleted. |
| 1.3.6.1.4.1.248.14.2.15.2 | NodehmCpuResources | |||
| 1.3.6.1.4.1.248.14.2.15.2.1 | ScalarhmCpuUtilization | read-only | current | The current cpu utilization of the switch in percent. |
| 1.3.6.1.4.1.248.14.2.15.2.2 | ScalarhmCpuAverageUtilization | read-only | current | The average cpu utilization of the switch in percent, max. measured over the last 30 minutes. |
| 1.3.6.1.4.1.248.14.2.15.2.3 | ScalarhmCpuRunningProcesses | read-only | current | The current number of processes running. |
| 1.3.6.1.4.1.248.14.2.15.2.4 | ScalarhmCpuMaxRunningProcesses | read-only | current | The maximum number of processes running, max. since the last 30 minutes. |
| 1.3.6.1.4.1.248.14.2.15.3 | NodehmMemoryResources | |||
| 1.3.6.1.4.1.248.14.2.15.3.1 | ScalarhmMemoryAllocated | read-only | current | The current allocated memory of the switch in kBytes. |
| 1.3.6.1.4.1.248.14.2.15.3.2 | ScalarhmMemoryFree | read-only | current | The current free memory of the switch in kBytes. |
| 1.3.6.1.4.1.248.14.2.15.3.3 | ScalarhmMemoryAllocatedAverage | read-only | current | The average allocated memory of the switch in kBytes, measured over the last 30 minutes. |
| 1.3.6.1.4.1.248.14.2.15.3.4 | ScalarhmMemoryFreeAverage | read-only | current | The average free memory of the switch in kBytes, measured over the last 30 minutes. |
| 1.3.6.1.4.1.248.14.2.15.4 | NodehmNetworkResources | |||
| 1.3.6.1.4.1.248.14.2.15.4.1 | ScalarhmNetworkCpuIfUtilization | read-only | current | The current network utilization of the internal cpu interface in percent. |
| 1.3.6.1.4.1.248.14.2.15.4.2 | ScalarhmNetworkCpuIfAverageUtilization | read-only | current | The average network utilization of the internal cpu interface in percent, measured over the last 30 minutes. |
| 1.3.6.1.4.1.248.14.2.16 | NodehmIndustrialEthernetProtocols | |||
| 1.3.6.1.4.1.248.14.2.16.1 | NodehmProfinetIOConfigGroup | |||
| 1.3.6.1.4.1.248.14.2.16.1.1 | ScalarhmPNIOAdminStatus | read-write | current | Enables/disables the ProfinetIO functionality on this device. If disabled(2), the ProfinetIO protocol is inactive, but the ProfinetIO MIBs can be accessed. The… |
| 1.3.6.1.4.1.248.14.2.16.1.2 | ScalarhmPNIODeviceID | read-only | current | Identifier of the device family. Values 1 .. 65635 are valid device IDs. |
| 1.3.6.1.4.1.248.14.2.16.1.3 | ScalarhmPNIOModuleIdentNumber | read-only | current | Identifier ID of the device of port or module. |
| 1.3.6.1.4.1.248.14.2.16.1.4 | ScalarhmPNIOOrderID | read-only | current | Product (switch) order ID. The size is restricted to 64 characters. |
| 1.3.6.1.4.1.248.14.2.16.1.5 | ScalarhmPNIODeviceTypeDetails | read-only | current | Switch device type details, for example: 4 Port Rail Switch. |
| 1.3.6.1.4.1.248.14.2.16.1.6 | ScalarhmPNIOSoftwareRelease | read-only | current | This value is a string that contains Version number of software in profinetio format, for example: 01.0.03. |
| 1.3.6.1.4.1.248.14.2.16.1.7 | ScalarhmPNIOHardwareRelease | read-only | current | Version number of switch hardware in profinetio format. |
| 1.3.6.1.4.1.248.14.2.16.1.8 | ScalarhmPNIOOrderID9th | read-only | current | Product (switch) order ID. The size is restricted to 32 characters (In the form of the 9-th numbers). |
| 1.3.6.1.4.1.248.14.2.16.1.10 | TablehmPNIODcpModeTable | not-accessible | current | Table of DCP mode entries |
| 1.3.6.1.4.1.248.14.2.16.1.10.1 | RowhmPNIODcpModeEntry | not-accessible | current | DCP mode entry |
| 1.3.6.1.4.1.248.14.2.16.1.10.1.1 | ColumnhmPNIODcpModePortID | read-only | current | Port ID for the DCP mode table entry |
| 1.3.6.1.4.1.248.14.2.16.1.10.1.2 | ColumnhmPNIODcpMode | read-write | current | DCP mode for one port. Allowed values none(0), ingress(1), egress(2) or both(3) which is default. |
| 1.3.6.1.4.1.248.14.2.16.1.11 | ScalarhmPNIONameOfStation | read-write | current | Device name. The size is restricted to 240 characters. It must be conform to the restrictions as decribed in PNIO protocol specification. |
| 1.3.6.1.4.1.248.14.2.16.1.12 | ScalarhmPNIONumActiveApplicationRelations | read-only | current | Returns the number of active application relations. |
| 1.3.6.1.4.1.248.14.2.16.1.100 | NodehmPNIOMgmtSEEErrorIDGroup | |||
| 1.3.6.1.4.1.248.14.2.16.1.100.1 | IdentityhmPNIOApplicationRelationActive | current | Set not allowed, a Profinet application relation is active. | |
| 1.3.6.1.4.1.248.14.2.16.2 | NodehmProfinetIOStatisticsGroup | |||
| 1.3.6.1.4.1.248.14.2.16.3 | NodehmEthernetIPConfigGroup | |||
| 1.3.6.1.4.1.248.14.2.16.3.1 | ScalarhmEtherNetIPAdminStatus | read-write | current | Enables/disables the EtherNet/IP(TM) functionality on this device. If disabled(2), the EtherNet/IP protocol is deactivated, but the EtherNet/IP MIBs can be acc… |
| 1.3.6.1.4.1.248.14.2.16.3.2 | ScalarhmEtherNetIPErrorCode | read-only | current | Read the error code within EtherNet/IP(TM) action. |
| 1.3.6.1.4.1.248.14.2.16.3.3 | ScalarhmEtherNetIPProductCode | read-only | current | Read the Product Code as shown in the Identity Object of EtherNet/IP(TM). Values 1 .. 65635 are valid product codes. |
| 1.3.6.1.4.1.248.14.2.16.3.4 | ScalarhmEtherNetIPRevisionMajor | read-only | current | Read the major revision number as shown in the Identity Object of EtherNet/IP(TM). Values 1 .. 255 are valid revisions. |
| 1.3.6.1.4.1.248.14.2.16.3.5 | ScalarhmEtherNetIPRevisionMinor | read-only | current | Read the minor revision number as shown in the Identity Object of EtherNet/IP(TM). Values 1 .. 255 are valid revisions. |
| 1.3.6.1.4.1.248.14.2.16.3.6 | ScalarhmEtherNetIPProductName | read-only | current | Read the product name as shown in the Identity Object of EtherNet/IP(TM). The size is restricted to 32 Characters. |
| 1.3.6.1.4.1.248.14.2.16.3.7 | ScalarhmEtherNetIPCatalogName | read-only | current | Read the catolog name as provided in the EDS file for EtherNet/IP(TM). The size is restricted to 255 Characters. |
| 1.3.6.1.4.1.248.14.2.16.4 | NodehmEthernetIPStatisticsGroup | |||
| 1.3.6.1.4.1.248.14.2.16.4.1 | ScalarhmEtherNetIPConnEstablished | read-only | current | Statistics: number of connections that have been established within EtherNet/IP. |
| 1.3.6.1.4.1.248.14.2.16.4.2 | ScalarhmEtherNetIPConnTimeouts | read-only | current | Statistics: number of connection timeouts that have been occurred within EtherNet/IP. |
| 1.3.6.1.4.1.248.14.2.16.4.3 | ScalarhmEtherNetIPVendorObjRequests | read-only | current | Statistics: number of requests to the vendor specific objects within EtherNet/IP. |
| 1.3.6.1.4.1.248.14.2.16.5 | NodehmIEC61850ConfigGroup | |||
| 1.3.6.1.4.1.248.14.2.16.5.1 | ScalarhmIEC61850MMSServerAdminStatus | read-write | current | Enables/disables the IEC61850 MMS server functionality on this device. If disabled(2), the MMS Server is deactivated, but the IEC61850 MIBs can be accessed. Th… |
| 1.3.6.1.4.1.248.14.2.16.5.2 | ScalarhmIEC61850MMSServerWriteAccessStatus | read-write | current | Enables/disables the Read/Write capability of the IEC61850 MMS. If disabled(2), the MMS Server is accessible Read-Only, if enabled(2) the devices configuration… |
| 1.3.6.1.4.1.248.14.2.16.5.3 | ScalarhmIEC61850MMSServerTechnicalKey | read-write | current | The IEC61850 MMS server technical key setting corresponds to the IEC61850 IED name. This name is used to identify the device via a IEC61850 MMS client. The siz… |
| 1.3.6.1.4.1.248.14.2.16.6 | NodehmIEC61850StatisticsGroup | |||
| 1.3.6.1.4.1.248.14.2.17 | NodehmAgentLoginGroup | |||
| 1.3.6.1.4.1.248.14.2.17.1 | ScalarhmAgentLoginBanner | read-write | current | The text added in this variable by the user will be displayed in the system login page as banner on every login into the CLI (local or remote) or when performi… |
| 1.3.6.1.4.1.248.14.2.17.2 | ScalarhmAgentLoginBannerAdminStatus | read-write | current | Enables/disables the display of the pre login banner text. |
| 1.3.6.1.4.1.248.14.2.17.3 | ScalarhmAgentCliBannerText | read-write | current | The text added in this variable by the user will be displayed in the system login page (local or remote) instead of the systemoverview. The default value is an… |
| 1.3.6.1.4.1.248.14.2.17.4 | ScalarhmAgentCliBannerAdminStatus | read-write | current | Enables/disables the display of the cli login banner text instead of the standard login banner. |
| 1.3.6.1.4.1.248.14.2.18 | NodehmPortMonitorGroup | |||
| 1.3.6.1.4.1.248.14.2.18.1 | ScalarhmPortMonitorAdminMode | read-write | current | Global switch to enable / disable the port state actions, which are performed if a condition becomes true |
| 1.3.6.1.4.1.248.14.2.18.2 | TablehmPortMonitorIntfTable | not-accessible | current | Port state mode interface table. |
| 1.3.6.1.4.1.248.14.2.18.2.1 | RowhmPortMonitorIntfEntry | not-accessible | current | Port state mode interface entry. |
| 1.3.6.1.4.1.248.14.2.18.2.1.1 | ColumnhmPortMonitorIntfMode | read-write | current | Port monitor interface mode. |
| 1.3.6.1.4.1.248.14.2.18.2.1.2 | ColumnhmPortMonitorIntfReset | read-write | current | Port monitor interface reset. |
| 1.3.6.1.4.1.248.14.2.18.2.1.3 | ColumnhmPortMonitorIntfAction | read-write | current | Interface link disable state. |
| 1.3.6.1.4.1.248.14.2.18.3 | NodehmPortMonitorConditionGroup | |||
| 1.3.6.1.4.1.248.14.2.18.3.1 | TablehmPortMonitorConditionIntfTable | not-accessible | current | Port state condition interface table. |
| 1.3.6.1.4.1.248.14.2.18.3.1.1 | RowhmPortMonitorConditionIntfEntry | not-accessible | current | Port state action interface entry. |
| 1.3.6.1.4.1.248.14.2.18.3.1.1.1 | ColumnhmPortMonitorConditionLinkFlapMode | read-write | current | Interface link flap mode. |
| 1.3.6.1.4.1.248.14.2.18.3.1.1.2 | ColumnhmPortMonitorConditionCrcFragmentsMode | read-write | current | Interface CrcFragments mode. |
| 1.3.6.1.4.1.248.14.2.18.3.1.1.3 | ColumnhmPortMonitorConditionField | read-only | current | Condition type field. |
| 1.3.6.1.4.1.248.14.2.18.3.1.1.4 | ColumnhmPortMonitorConditionOverloadDetectionMode | read-write | current | Interface Overload Detection mode. |
| 1.3.6.1.4.1.248.14.2.18.3.1.1.5 | ColumnhmPortMonitorConditionSpeedDuplexMode | read-write | current | Interface Speed and Duplex monitor mode. |
| 1.3.6.1.4.1.248.14.2.18.3.2 | NodehmPortMonitorConditionLinkFlapGroup | |||
| 1.3.6.1.4.1.248.14.2.18.3.2.1 | ScalarhmPortMonitorConditionLinkFlapInterval | read-write | current | Measure interval in seconds (1-180s) for link flap detection. |
| 1.3.6.1.4.1.248.14.2.18.3.2.2 | ScalarhmPortMonitorConditionLinkFlapCount | read-write | current | Link flap counter (1-100). |
| 1.3.6.1.4.1.248.14.2.18.3.2.3 | TablehmPortMonitorConditionLinkFlapIntfTable | not-accessible | current | Port condition link flap interface table. |
| 1.3.6.1.4.1.248.14.2.18.3.2.3.1 | RowhmPortMonitorConditionLinkFlapIntfEntry | not-accessible | current | Port condition link flap interface entry. |
| 1.3.6.1.4.1.248.14.2.18.3.2.3.1.1 | ColumnhmPortMonitorConditionLinkFlapCountInterval | read-only | current | Link flap count that occured in last interval. |
| 1.3.6.1.4.1.248.14.2.18.3.2.3.1.2 | ColumnhmPortMonitorConditionLinkFlapCountTotal | read-only | current | Total link flap count. |
| 1.3.6.1.4.1.248.14.2.18.3.3 | NodehmPortMonitorConditionCrcFragmentsGroup | |||
| 1.3.6.1.4.1.248.14.2.18.3.3.1 | ScalarhmPortMonitorConditionCrcFragmentsInterval | read-write | current | Measure interval in seconds (5-180s) for CrcFragments detection. |
| 1.3.6.1.4.1.248.14.2.18.3.3.2 | ScalarhmPortMonitorConditionCrcFragmentsCount | read-write | current | CrcFragments counter (1-1000000). |
| 1.3.6.1.4.1.248.14.2.18.3.3.3 | TablehmPortMonitorConditionCrcFragmentsIntfTable | not-accessible | current | Port condition CrcFragments interface table. |
| 1.3.6.1.4.1.248.14.2.18.3.3.3.1 | RowhmPortMonitorConditionCrcFragmentsIntfEntry | not-accessible | current | Port condition CrcFragments interface entry. |
| 1.3.6.1.4.1.248.14.2.18.3.3.3.1.1 | ColumnhmPortMonitorConditionCrcFragmentsCountInterval | read-only | current | CrcFragments count that occured in last interval. |
| 1.3.6.1.4.1.248.14.2.18.3.3.3.1.2 | ColumnhmPortMonitorConditionCrcFragmentsCountTotal | read-only | current | Total CrcFragments count. |
| 1.3.6.1.4.1.248.14.2.18.3.4 | NodehmPortMonitorConditionOverloadDetectionGroup | |||
| 1.3.6.1.4.1.248.14.2.18.3.4.1 | ScalarhmPortMonitorConditionOverloadDetectionInterval | read-write | current | Measure interval in seconds (1-20s) for overload detection. |
| 1.3.6.1.4.1.248.14.2.18.3.4.2 | TablehmPortMonitorConditionOverloadDetectionIntfTable | not-accessible | current | Port condition overload detection interface table. |
| 1.3.6.1.4.1.248.14.2.18.3.4.2.1 | RowhmPortMonitorConditionOverloadDetectionIntfEntry | not-accessible | current | Port condition overload detection interface entry. |
| 1.3.6.1.4.1.248.14.2.18.3.4.2.1.1 | ColumnhmPortMonitorConditionOverloadDetectionTrafficType | read-write | current | Overload detection conditon traffic type. |
| 1.3.6.1.4.1.248.14.2.18.3.4.2.1.2 | ColumnhmPortMonitorConditionOverloadDetectionThresholdType | read-write | current | Overload detection conditon threshold type. |
| 1.3.6.1.4.1.248.14.2.18.3.4.2.1.3 | ColumnhmPortMonitorConditionOverloadDetectionLowerThresholdValue | read-write | current | Overload detection conditon lower threshold value. |
| 1.3.6.1.4.1.248.14.2.18.3.4.2.1.4 | ColumnhmPortMonitorConditionOverloadDetectionUpperThresholdValue | read-write | current | Overload detection condition upper threshold value. |
| 1.3.6.1.4.1.248.14.2.18.3.5 | NodehmPortMonitorConditionSpeedDuplexGroup | |||
| 1.3.6.1.4.1.248.14.2.18.3.5.1 | TablehmPortMonitorConditionSpeedDuplexTable | not-accessible | current | Port condition speed-duplex interface table. |
| 1.3.6.1.4.1.248.14.2.18.3.5.1.1 | RowhmPortMonitorConditionSpeedDuplexEntry | not-accessible | current | Port condition speed-duplex interface entry. |
| 1.3.6.1.4.1.248.14.2.18.3.5.1.1.1 | ColumnhmPortMonitorConditionSpeedDuplexValue | read-write | current | Speed and duplex combination allowed by port-monitor. |
| 1.3.6.1.4.1.248.14.2.19 | NodehmAutoDisGroup | |||
| 1.3.6.1.4.1.248.14.2.19.1 | TablehmAutoDisIntfTable | not-accessible | current | Port Auto Disable interface table. |
| 1.3.6.1.4.1.248.14.2.19.1.1 | RowhmAutoDisIntfEntry | not-accessible | current | Port Auto Disable interface entry. |
| 1.3.6.1.4.1.248.14.2.19.1.1.1 | ColumnhmAutoDisIntfRemainingTime | read-only | current | Remaining time in seconds until the activation of the port. |
| 1.3.6.1.4.1.248.14.2.19.1.1.2 | ColumnhmAutoDisIntfComponentName | read-only | current | Name of the component that triggered the error |
| 1.3.6.1.4.1.248.14.2.19.1.1.3 | ColumnhmAutoDisIntfErrorReason | read-only | current | Error disable reason |
| 1.3.6.1.4.1.248.14.2.19.1.1.4 | ColumnhmAutoDisIntfTimer | read-write | current | Timer value in seconds after which a deactivated port is activated again. Possible values are: 30-2147483. A value of 0 disables the timer. |
| 1.3.6.1.4.1.248.14.2.19.1.1.5 | ColumnhmAutoDisIntfReset | read-write | current | Port Auto Disable interface reset. |
| 1.3.6.1.4.1.248.14.2.19.1.1.6 | ColumnhmAutoDisIntfOperState | read-only | current | Status of Auto Disable interface admin state |
| 1.3.6.1.4.1.248.14.2.19.2 | TablehmAutoDisReasonTable | not-accessible | current | Possible reasons for Auto Disable |
| 1.3.6.1.4.1.248.14.2.19.2.1 | RowhmAutoDisReasonEntry | not-accessible | current | Port Auto Disable interface entry. |
| 1.3.6.1.4.1.248.14.2.19.2.1.1 | ColumnhmAutoDisReasons | not-accessible | current | Reason for deactivation a port |
| 1.3.6.1.4.1.248.14.2.19.2.1.2 | ColumnhmAutoDisReasonOperation | read-write | current | Enables/disables recovery by reason on this device. |
| 1.3.6.1.4.1.248.14.10 | NodehmProducts | |||
| 1.3.6.1.4.1.248.14.10.2 | Noders2 | |||
| 1.3.6.1.4.1.248.14.10.3 | Nodemach3000 | |||
| 1.3.6.1.4.1.248.14.10.4 | Nodems2108-2 | |||
| 1.3.6.1.4.1.248.14.10.5 | Nodems3124-4 | |||
| 1.3.6.1.4.1.248.14.10.6 | Noders2-16 | |||
| 1.3.6.1.4.1.248.14.10.7 | Noders2-4r | |||
| 1.3.6.1.4.1.248.14.10.10 | Nodems4128-5 | |||
| 1.3.6.1.4.1.248.14.10.20 | Nodeeagle | |||
| 1.3.6.1.4.1.248.14.10.21 | Noderr-epl | |||
| 1.3.6.1.4.1.248.14.10.22 | Nodeeagle-mguard | |||
| 1.3.6.1.4.1.248.14.10.23 | Nodeeagle20 | |||
| 1.3.6.1.4.1.248.14.10.24 | Nodeeagleone | |||
| 1.3.6.1.4.1.248.14.10.30 | Nodems20 | |||
| 1.3.6.1.4.1.248.14.10.31 | Nodems30 | |||
| 1.3.6.1.4.1.248.14.10.40 | Noders20 | |||
| 1.3.6.1.4.1.248.14.10.41 | Noders30 | |||
| 1.3.6.1.4.1.248.14.10.44 | Nodersb20 | |||
| 1.3.6.1.4.1.248.14.10.45 | Nodeosb20 | |||
| 1.3.6.1.4.1.248.14.10.50 | Nodemach4002-48-4G | |||
| 1.3.6.1.4.1.248.14.10.60 | Nodeoctopus | |||
| 1.3.6.1.4.1.248.14.10.70 | Nodemach4002-24G | |||
| 1.3.6.1.4.1.248.14.10.71 | Nodemach4002-24G-3X | |||
| 1.3.6.1.4.1.248.14.10.75 | Nodemach4002-48G | |||
| 1.3.6.1.4.1.248.14.10.76 | Nodemach4002-48G-3X | |||
| 1.3.6.1.4.1.248.14.10.90 | Noderuggedswitch | |||
| 1.3.6.1.4.1.248.14.10.100 | Noderailswitchrugged | |||
| 1.3.6.1.4.1.248.14.10.110 | Nodemach100 | |||
| 1.3.6.1.4.1.248.14.10.120 | Nodeoctopus-os | |||
| 1.3.6.1.4.1.248.14.10.130 | Nodemach100ge | |||
| 1.3.6.1.4.1.248.14.10.131 | Nodemach1000ge | |||
| 1.3.6.1.4.1.248.14.10.200 | Nodeeem1 | |||
| 1.3.6.1.4.1.248.14.10.300 | Nodegecko | |||
| 1.3.6.1.4.1.248.14.17 | NodehmMACNotificationGroup | |||
| 1.3.6.1.4.1.248.14.17.1 | NodehmMACNotifyMibObjects | |||
| 1.3.6.1.4.1.248.14.17.1.1 | ScalarhmMACNotifyAdminState | read-write | current | Enable or disable MAC Notification global. |
| 1.3.6.1.4.1.248.14.17.1.2 | ScalarhmMACNotifyInterval | read-write | current | MAC Notification interval in seconds. Range is between 0 and 2147483647. |
| 1.3.6.1.4.1.248.14.17.2 | NodehmMACNotifyInterfaceMibObjects | |||
| 1.3.6.1.4.1.248.14.17.2.1 | TablehmMACNotifyInterfaceTable | not-accessible | current | A table containing current configuration information for each interface. |
| 1.3.6.1.4.1.248.14.17.2.1.1 | RowhmMACNotifyInterfaceEntry | not-accessible | current | A logical row in the hmMACNotifyInterfaceTable. |
| 1.3.6.1.4.1.248.14.17.2.1.1.1 | ColumnhmMACNotifyInterfaceAdminState | read-write | current | Enable or disable MAC Notification on this interface. |
| 1.3.6.1.4.1.248.14.17.2.1.1.2 | ColumnhmMACNotifyInterfaceMACAddr | read-only | current | Last MAC address on this interface that have been added or removed from the address table. |
| 1.3.6.1.4.1.248.14.17.2.1.1.3 | ColumnhmMACNotifyInterfaceMACStatus | read-only | current | Status of the last MAC address on this interface. |
| 1.3.6.1.4.1.248.14.17.2.1.1.4 | ColumnhmMACNotifyInterfaceMode | read-write | current | Setting this object to 'add' (1) causes that only notifications are sent when entries are added to the FDB. Setting this object to 'remove' (2) causes that onl… |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| BridgeIdOrNull | OCTET STRING (SIZE (0|8)) | current | The Bridge-Identifier as used in the Spanning Tree or Null, if no valid data is available |
| DIPSwitchState | INTEGER { on(1), off(2) } | current | Status of the DIP switch. |
| HmAgentLogSeverity | INTEGER { emergency(0), alert(1), critical(2), error(3), warning(4), notice(5), informational(6), debug(7) } | current | Severity code used in determining the SysLog Priority value. |
| HmLargeDisplayString | OCTET STRING (SIZE (0..2048)) | current | Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of character codes 0-127 (decimal) - th… |
| LEDState | INTEGER { off(1), green(2), yellow(3), red(4) } | current | Color of the LED |
| PTPClockIdentity | OCTET STRING (SIZE (8)) | current | The PTPClockIdentity type identifies a PTP clock. The PTPClockIdentity shall be in the IEEE EUI-64 format. For example: '008063FFFF000000' |
| PTPClockQuality | OCTET STRING (SIZE (4)) | current | The PTPClockQuality represents the quality of a clock. The first octet represents the clock class. The second octet represents the clockAccuracy and the last two octets represent the offsetScaledLogVariance For example: |
| PTPPortIdentity | OCTET STRING (SIZE (10)) | current | The PTPPortIdentity type identifies a PTP port. The first 8 octets within this value specifies the ClockIdentity. The last 2 octetes within this value specifies the port number. For example: '00 80 63 FF FF 00 00 00 00 … |
| PTPSubdomainName | OCTET STRING (SIZE (16)) | current | The values of the octets for the subdomain name may be chosen from the set consisting of the values of the printable ASCII characters starting with hex value 0x21 (!) up to and including hex value 0x7E (~). |
| PTPTimeInterval | OCTET STRING (SIZE (8)) | current | The scaledNanoseconds member is the time interval expressed in units of nanoseconds and multiplied by 2^+16. Positive or negative time intervals outside the maximum range of this data type shall be encoded as the larges… |