HNE-DEVICE-MIB
44 objects
This MIB module supplies the basic management objects for Home Networking Extenders. This MIB module is only supported by the Wi-Fi Gateway.
Imported Objects
| ARRIS-MIB | arrisProdIdRouter |
| IF-MIB | ifIndex |
| INET-ADDRESS-MIB | InetAddress InetAddressType |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DateAndTime DisplayString MacAddress RowStatus TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4115.1.20.3 | IdentityhneMib | This MIB module supplies the basic management objects for Home Networking Extenders. This MIB module is only supported by the Wi-Fi Gateway. | ||
| 1.3.6.1.4.1.4115.1.20.3.1 | NodehneMibObjects | |||
| 1.3.6.1.4.1.4115.1.20.3.1.1 | NodehneWiFiGWSupport | |||
| 1.3.6.1.4.1.4115.1.20.3.1.1.1 | ScalarhneWiFiGWSearch | read-write | current | Setting this value to 'true' will trigger a M-SEARCH message from the Wi-Fi Gateway. |
| 1.3.6.1.4.1.4115.1.20.3.1.1.2 | TablehneWiFiGWTable | not-accessible | current | A table of Home Networking Extenders that have attempted to connect to the WiFi Gateway. |
| 1.3.6.1.4.1.4115.1.20.3.1.1.2.1 | RowhneWiFiGWEntry | not-accessible | current | A row in the table of the Home Networking Extender table. |
| 1.3.6.1.4.1.4115.1.20.3.1.1.2.1.1 | ColumnhneWiFiGWIndex | not-accessible | current | Indicates the instance of this table row. |
| 1.3.6.1.4.1.4115.1.20.3.1.1.2.1.2 | ColumnhneWiFiGWMACAddr | read-only | current | The MAC Address of the Home Networking Extender. |
| 1.3.6.1.4.1.4115.1.20.3.1.1.2.1.3 | ColumnhneWiFiGWIPAddrType | read-only | current | IP Address type of the Home Networking Extender. |
| 1.3.6.1.4.1.4115.1.20.3.1.1.2.1.4 | ColumnhneWiFiGWIPAddress | read-only | current | IP Address of the Home Networking Extender. |
| 1.3.6.1.4.1.4115.1.20.3.1.1.2.1.5 | ColumnhneWiFiGWARRISAutoCfgSupport | read-only | current | Indicates if the GW determined if the Home Networking Extender supports the ARRIS auto-configuration protocol. |
| 1.3.6.1.4.1.4115.1.20.3.1.1.2.1.6 | ColumnhneWiFiGWLocation | read-only | current | The URL from the location header field of the NOTIFY/M-SEARCH response of device discovery. |
| 1.3.6.1.4.1.4115.1.20.3.1.1.2.1.7 | ColumnhneWiFiGWManufacturer | read-only | current | The manufacturer of the Home Networking Extender from the device description during discovery. |
| 1.3.6.1.4.1.4115.1.20.3.1.1.2.1.8 | ColumnhneWiFiGWModelName | read-only | current | The model name of the Home Networking Extender from the device description during discovery. |
| 1.3.6.1.4.1.4115.1.20.3.1.1.2.1.9 | ColumnhneWiFiGWModelNumber | read-only | current | The model number of the Home Networking Extender from the device description during discovery. |
| 1.3.6.1.4.1.4115.1.20.3.1.1.2.1.10 | ColumnhneWiFiGWConfigurationId | read-only | current | Represents the current configuration of the Home Networking Extender. |
| 1.3.6.1.4.1.4115.1.20.3.1.1.2.1.11 | ColumnhneWiFiGWLastSynchAttemptTime | read-only | current | Timestamp of the last synchronization attempt of the Home Networking Extender. |
| 1.3.6.1.4.1.4115.1.20.3.1.1.2.1.12 | ColumnhneWiFiGWLastSynchAttemptResult | read-only | current | Indicates whether the last synchronization case passed or failed with failure reason. |
| 1.3.6.1.4.1.4115.1.20.3.1.1.2.1.13 | ColumnhneWiFiGWSynchedWithGW | read-only | current | Indicates if the Home Networking Extender is synchronized with the WiFi Gateway. |
| 1.3.6.1.4.1.4115.1.20.3.1.1.2.1.14 | ColumnhneWiFiGWOverride24OutputPower | read-write | current | Sets the output power relative to the hardware's maximum capability. This value is for the 2.4 GHz radio. This value overrides the gateway value set via wecbWi… |
| 1.3.6.1.4.1.4115.1.20.3.1.1.2.1.15 | ColumnhneWiFiGWOverride50OutputPower | read-write | current | Sets the output power relative to the hardware's maximum capability. This value is for the 5.0 GHz radio. This value overrides the gateway value set via wecbWi… |
| 1.3.6.1.4.1.4115.1.20.3.1.1.2.1.16 | ColumnhneWiFiGWOverride24Channel | read-write | current | Controls and reflects the current channel number (802.11g) or control channel (802.11n). If set to (0), the device will be put in auto-channel mode where it au… |
| 1.3.6.1.4.1.4115.1.20.3.1.1.2.1.17 | ColumnhneWiFiGWOverride50Channel | read-write | current | Controls and reflects the current channel number on the 5.0 GHz radio (802.11 a/n). If set to (0), the device will be put in auto-channel mode where it automat… |
| 1.3.6.1.4.1.4115.1.20.3.1.1.2.1.18 | ColumnhneWiFiGWOverride24ChannelBW | read-write | current | Determines which Band Width that we will be operating in. Either the 20MHz or the 40MHz. Note: This is for 802.11n mode only. This value overrides the gateway … |
| 1.3.6.1.4.1.4115.1.20.3.1.1.2.1.19 | ColumnhneWiFiGWOverride50ChannelBW | read-write | current | Determines which Band Width that we will be operating in. Either the 20MHz 40MHz or 80MHz. Note: This is for 802.11n mode only. This value overrides the gatewa… |
| 1.3.6.1.4.1.4115.1.20.3.1.1.3 | TablehneWiFiGWSupportedTable | not-accessible | current | A table of Home Networking Extenders that are supported by the Wi-Fi GW. |
| 1.3.6.1.4.1.4115.1.20.3.1.1.3.1 | RowhneWiFiGWSupportedEntry | not-accessible | current | A row in the table of the supported Home Networking Extender table. |
| 1.3.6.1.4.1.4115.1.20.3.1.1.3.1.1 | ColumnhneWiFiGWSupportedIndex | not-accessible | current | Indicates the instance of this table row. |
| 1.3.6.1.4.1.4115.1.20.3.1.1.3.1.2 | ColumnhneWiFiGWSupportedManufacturer | read-create | current | Manufacturer for the supported Home Networking Extenders. |
| 1.3.6.1.4.1.4115.1.20.3.1.1.3.1.3 | ColumnhneWiFiGWSupportedModelNumber | read-create | current | Model number for the supported Home Networking Extenders. |
| 1.3.6.1.4.1.4115.1.20.3.1.1.3.1.4 | ColumnhneWiFiGWSupportedRowStatus | read-create | current | Row status for the supported Home Networking Extender entry. |
| 1.3.6.1.4.1.4115.1.20.3.1.1.4 | ScalarhneWiFiGWConfigAttempts | read-write | current | The number of allowed configuration mismatch detections over the time period hneWiFiGWConfigDuration before the GW stops attempting to configure the Home Netwo… |
| 1.3.6.1.4.1.4115.1.20.3.1.1.5 | ScalarhneWiFiGWConfigDuration | read-write | current | The timer period over which the number of configuration mismatch detections per hneWiFiGWConfigAttempts is counted. |
| 1.3.6.1.4.1.4115.1.20.3.1.1.6 | ScalarhneWiFiGWAutoConfigurationEnable | read-write | current | Enables/disables the ARRIS Home Networking Extender Auto-configuration support. |
| 1.3.6.1.4.1.4115.1.20.3.1.1.7 | ScalarhneWiFiGWSecurityEnable | read-write | current | Enables/disables the ARRIS Home Networking Extender security support. |
| 1.3.6.1.4.1.4115.1.20.3.1.2 | NodehneLAN | |||
| 1.3.6.1.4.1.4115.1.20.3.1.2.1 | TablehneLANTable | not-accessible | current | A table of the LAN interfaces on the Home Networking Extenders connected to the WiFi Gateway. |
| 1.3.6.1.4.1.4115.1.20.3.1.2.1.1 | RowhneLANEntry | not-accessible | current | A row in the table of the Home Networking Extender VLAN table. |
| 1.3.6.1.4.1.4115.1.20.3.1.2.1.1.1 | ColumnhneLANIndex | not-accessible | current | Indicates the instance of this table row. |
| 1.3.6.1.4.1.4115.1.20.3.1.2.1.1.2 | ColumnhneLANGWMappingIndex | not-accessible | current | The value is hneWiFiGWIndex in the hneWiFiGWTable that correlates to the specific Home Networking Extender being added to this HNE LAN table on the Gateway. |
| 1.3.6.1.4.1.4115.1.20.3.1.2.1.1.3 | ColumnhneLANInterface | read-only | current | TR-181i2 Interface object of the specific HNE LAN-side interface. |
| 1.3.6.1.4.1.4115.1.20.3.1.2.1.1.4 | ColumnhneLANInterfaceType | read-only | current | Indicates the interface type. |
| 1.3.6.1.4.1.4115.1.20.3.1.2.1.1.5 | ColumnhneLANBridgingMgmtPortInterface | read-only | current | TR-181i2 Bridge Port Table path name for management port entry for the specific HNE interface. Note: This column is not valid for hneLANInterfaceType values of… |
| 1.3.6.1.4.1.4115.1.20.3.1.2.1.1.6 | ColumnhneLANVLANID | read-only | current | Indicates the VLAN ID to be used for this VLAN mapping. Note: This column is not valid for hneLANInterfaceType values of 'radio24Ghz' and 'radio50Ghz'. |