HP-AUTZ-MIB
89 objects
This MIB module contains the definitions of objects for managing the user authorization service on HP networking devices.
Imported Objects
| HP-ICF-OID | hpSwitch |
| HP-ICF-TC | VidList |
| INET-ADDRESS-MIB | InetAddress InetAddressType |
| Q-BRIDGE-MIB | VlanIndex |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | RowStatus TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.5.1.32 | IdentityhpSwitchAuthorizationMIB | This MIB module contains the definitions of objects for managing the user authorization service on HP networking devices. | ||
| 1.3.6.1.4.1.11.2.14.11.5.1.32.0 | NodehpicfSwitchAuthorizationNotifications | |||
| 1.3.6.1.4.1.11.2.14.11.5.1.32.0.1 | NotificationhpicfSwitchAuthServerFail | current | This notification indicates that the specified server is not reachable. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.32.1 | NodehpSwitchAuthorizationConfig | |||
| 1.3.6.1.4.1.11.2.14.11.5.1.32.1.1 | TablehpSwitchAutzServiceTable | not-accessible | current | The (conceptual) table listing the authorization service types. |
| 1.3.6.1.4.1.11.2.14.11.5.1.32.1.1.1 | RowhpSwitchAutzServiceEntry | not-accessible | current | An entry (conceptual row) in the hpSwitchAutzServiceTable. |
| 1.3.6.1.4.1.11.2.14.11.5.1.32.1.1.1.1 | ColumnhpSwitchAutzServiceType | not-accessible | current | Signifies the authorization service type for which this entry contains configuration information. |
| 1.3.6.1.4.1.11.2.14.11.5.1.32.1.1.1.2 | ColumnhpSwitchAutzServicePrimaryMethod | read-write | current | The primary method used for authorization. This object can be set only when the authorization service type is command. A value of local (1) indicates that auth… |
| 1.3.6.1.4.1.11.2.14.11.5.1.32.1.1.1.3 | ColumnhpSwitchAutzServiceSecondaryMethod | read-write | current | Specifies the secondary (backup) method used for authorization. |
| 1.3.6.1.4.1.11.2.14.11.5.1.32.1.1.1.4 | ColumnhpSwitchAutzServiceCommandsLevel | read-write | current | This object specifies the command level that requires authorization. A value of all (1) indicates that authorization is required for all commands. A value of m… |
| 1.3.6.1.4.1.11.2.14.11.5.1.32.1.2 | NodehpicfSwitchAuthObjects | |||
| 1.3.6.1.4.1.11.2.14.11.5.1.32.1.2.1 | ScalarhpicfSwitchAuthServerType | accessible-for-notify | current | Authorization server type reported in hpicfSwitchAuthorization notifications. |
| 1.3.6.1.4.1.11.2.14.11.5.1.32.1.2.2 | ScalarhpicfSwitchAuthServerIPType | accessible-for-notify | current | InetAddressType of the address reported in hpicfSwitchAuthServerIP. |
| 1.3.6.1.4.1.11.2.14.11.5.1.32.1.2.3 | ScalarhpicfSwitchAuthServerIP | accessible-for-notify | current | This object is used in an hpicfSwitchAuthorizationNotification to report the IP address of the affected server. |
| 1.3.6.1.4.1.11.2.14.11.5.1.32.1.3 | NodehpSwitchAuthConfigObjects | |||
| 1.3.6.1.4.1.11.2.14.11.5.1.32.1.3.1 | ScalarhpicfSwitchAuthServerNotifyEnable | read-write | current | The operational status of hpicfSwitchAuthServerFail notifications. The default value is 1 (Enabled). A value of 2 represents Disabled. Writing this object requ… |
| 1.3.6.1.4.1.11.2.14.11.5.1.32.1.4 | NodehpSwitchAuthLocalPrivConfigObjects | |||
| 1.3.6.1.4.1.11.2.14.11.5.1.32.1.4.1 | TablehpSwitchLocalMgmtPrivGroupsTable | not-accessible | current | This table lists the local management privilege group names. |
| 1.3.6.1.4.1.11.2.14.11.5.1.32.1.4.1.1 | RowhpSwitchLocalMgmtPrivGroupsEntry | not-accessible | current | Local Management Groups entry. |
| 1.3.6.1.4.1.11.2.14.11.5.1.32.1.4.1.1.1 | ColumnhpSwitchLocalMgmtPrivGroupIndex | not-accessible | current | The index value which uniquely identifies a row in the group table. The values, One (1) is reserved for a predefined manager group, Two (2) is reserved for use… |
| 1.3.6.1.4.1.11.2.14.11.5.1.32.1.4.1.1.2 | ColumnhpSwitchLocalMgmtPrivGroupName | read-create | current | The name of a given Local Management server group. |
| 1.3.6.1.4.1.11.2.14.11.5.1.32.1.4.1.1.3 | ColumnhpSwitchLocalMgmtPrivGroupStatus | read-create | current | The status of the local management privilege group row. |
| 1.3.6.1.4.1.11.2.14.11.5.1.32.1.4.2 | TablehpSwitchLocalMgmtPrivCommandsTable | not-accessible | current | This table lists the local management Privilege Command Match strings. |
| 1.3.6.1.4.1.11.2.14.11.5.1.32.1.4.2.1 | RowhpSwitchLocalMgmtPrivCommandsEntry | not-accessible | current | Local Management Commands entry. |
| 1.3.6.1.4.1.11.2.14.11.5.1.32.1.4.2.1.1 | ColumnhpSwitchLocalMgmtPrivCmdSequenceIndex | not-accessible | current | The index value which uniquely identifies a row in the command table. See the documentation for the number of sequences allowed. |
| 1.3.6.1.4.1.11.2.14.11.5.1.32.1.4.2.1.2 | ColumnhpSwitchLocalMgmtPrivCmdMatchStr | read-create | current | The syntax of a command within a group. See the documentation for the maximum length of the command name. |
| 1.3.6.1.4.1.11.2.14.11.5.1.32.1.4.2.1.3 | ColumnhpSwitchLocalMgmtPrivCmdPriv | read-create | current | The privilege associated with commands that match the command string. |
| 1.3.6.1.4.1.11.2.14.11.5.1.32.1.4.2.1.4 | ColumnhpSwitchLocalMgmtPrivCmdSendLog | read-create | current | Determines if a log message is generated when commands matching this command string are attempted. |
| 1.3.6.1.4.1.11.2.14.11.5.1.32.1.4.2.1.5 | ColumnhpSwitchLocalMgmtPrivCmdStatus | read-create | current | The status of the local management privilege command row. |
| 1.3.6.1.4.1.11.2.14.11.5.1.32.1.5 | NodehpSwitchAutzUserRole | |||
| 1.3.6.1.4.1.11.2.14.11.5.1.32.1.5.1 | ScalarhpSwitchAutzUserRoleEnabled | read-write | current | Enable user role-based authorization. When enabled, authenticated clients are assigned roles that determine authorization level. When disabled, roles are not u… |
| 1.3.6.1.4.1.11.2.14.11.5.1.32.1.5.2 | ScalarhpSwitchAutzUserRoleInitialRoleName | read-write | current | The value of this object must match the hpSwitchAutzUserRoleName of an entry in the hpSwithcAutzUserRoleTable. |
| 1.3.6.1.4.1.11.2.14.11.5.1.32.1.5.3 | TablehpSwitchAutzUserRoleTable | not-accessible | current | A table of configured user roles. The maximum number of entries is implementation dependent. |
| 1.3.6.1.4.1.11.2.14.11.5.1.32.1.5.3.1 | RowhpSwitchAutzUserRoleEntry | not-accessible | current | A user role table entry. |
| 1.3.6.1.4.1.11.2.14.11.5.1.32.1.5.3.1.1 | ColumnhpSwitchAutzUserRoleName | not-accessible | current | The name of this user role. |
| 1.3.6.1.4.1.11.2.14.11.5.1.32.1.5.3.1.2 | ColumnhpSwitchAutzUserRoleRowStatus | read-create | current | The Row Status of this entry. To create a new entry, send an SNMP SET request with a RowStatus of 'createAndGo'. active - the entry is ready to use. notInServi… |
| 1.3.6.1.4.1.11.2.14.11.5.1.32.1.5.3.1.3 | ColumnhpSwitchAutzUserRoleType | read-only | current | This object defines different user role types supported. Predefined user roles cannot be modified or deleted. Downloaded user roles cannot be modified or creat… |
| 1.3.6.1.4.1.11.2.14.11.5.1.32.1.5.3.1.4 | ColumnhpSwitchAutzUserRoleCaptivePortalProfileName | read-create | current | The name of the captive portal profile (hpicfUsrAuthCaptivePortalProfileName) associated with this role. All printable ASCII characters are allowed except '.',… |
| 1.3.6.1.4.1.11.2.14.11.5.1.32.1.5.3.1.5 | ColumnhpSwitchAutzUserRoleIngressUserPolicyName | read-create | current | The name associated with hpicfGppcv2NpPolicyName of hpicfGppcv2NpSubType 'policyUser' assigned to this role. |
| 1.3.6.1.4.1.11.2.14.11.5.1.32.1.5.3.1.6 | ColumnhpSwitchAutzUserRoleReauthPeriod | read-create | current | Specifies the period, in seconds, at which an authenticated client must re-authenticate. A value of 0 signifies that an authenticated client will never have to… |
| 1.3.6.1.4.1.11.2.14.11.5.1.32.1.5.3.1.7 | ColumnhpSwitchAutzUserRoleVlanId | read-create | current | The untagged VLAN ID for this role. A value of 0 indicates unset. This column is mutually exclusive with hpSwitchAutzUserRoleVlanName. |
| 1.3.6.1.4.1.11.2.14.11.5.1.32.1.5.3.1.8 | ColumnhpSwitchAutzUserRoleVlanName | read-create | current | The untagged VLAN name for this role. This column is mutually exclusive with hpSwitchAutzUserRoleVlanId. |
| 1.3.6.1.4.1.11.2.14.11.5.1.32.1.5.3.1.9 | ColumnhpSwitchAutzUserRoleTunneledNodeServerRedirect | read-create | current | Enables or disables the traffic redirection to the tunnel. If the MIB object 'hpSwitchAutzUserRoleCaptivePortalProfileName' is already enabled and an attempt i… |
| 1.3.6.1.4.1.11.2.14.11.5.1.32.1.5.3.1.10 | ColumnhpSwitchAutzUserRoleTunneledNodeServerSecondaryRole | read-create | current | The secondary role associated with this user role. This will be applied to user traffic at tunnel-node server end. All printable ASCII characters are allowed e… |
| 1.3.6.1.4.1.11.2.14.11.5.1.32.1.5.3.1.11 | ColumnhpSwitchAutzUserRoleTaggedVlanId | read-create | deprecated | The tagged VLAN ID for this role. A value of 0 indicates unset. This column is mutually exclusive with hpSwitchAutzUserRoleTaggedVlanName,. |
| 1.3.6.1.4.1.11.2.14.11.5.1.32.1.5.3.1.12 | ColumnhpSwitchAutzUserRoleTaggedVlanName | read-create | current | The tagged VLAN name for this role. This column is mutually exclusive with hpSwitchAutzUserRoleTaggedVlanId. |
| 1.3.6.1.4.1.11.2.14.11.5.1.32.1.5.3.1.13 | ColumnhpSwitchAutzUserRoleTunneledNodeServerDownloadableRole | read-create | current | This object indicates if the secondary roles is downloadable user role or not.The hpSwitchAutzUserRoleTunneledNodeServerRedirectobject should be enabled before… |
| 1.3.6.1.4.1.11.2.14.11.5.1.32.1.5.3.1.14 | ColumnhpSwitchAutzUserRoleLogOffPeriod | read-create | current | Specifies the period, in seconds, at which an authenticated client must automatically log-off. A value of 0 signifies that an authenticated client will never h… |
| 1.3.6.1.4.1.11.2.14.11.5.1.32.1.5.3.1.15 | ColumnhpSwitchAutzUserRoleCachedReauthPeriod | read-create | current | The value indicates the period in seconds, during which cached reauthentication is allowed on the port. A value of 0 signifies cached reauthentication period i… |
| 1.3.6.1.4.1.11.2.14.11.5.1.32.1.5.3.1.16 | ColumnhpSwitchAutzUserRoleTaggedVlanList | read-create | current | The set of tagged VLANs associated with this user-role. |
| 1.3.6.1.4.1.11.2.14.11.5.1.32.1.5.4 | ScalarhpSwitchAutzUserRoleDownloadedEnabled | read-write | current | This object enables or disables the downlodable user role feature. The hpSwitchAutzUserRoleEnabled object should be enabled before configuring this object. |
| 1.3.6.1.4.1.11.2.14.11.5.1.32.1.5.5 | TablehpSwitchAutzUserRoleSubTable | not-accessible | current | A table of configured sub user roles attributes. The maximum number of entries is implementation dependent. |
| 1.3.6.1.4.1.11.2.14.11.5.1.32.1.5.5.1 | RowhpSwitchAutzUserRoleSubEntry | not-accessible | current | A user role sub table entry. |
| 1.3.6.1.4.1.11.2.14.11.5.1.32.1.5.5.1.1 | ColumnhpSwitchAutzUserRoleSubType | not-accessible | current | This object specifies the sub type of user-role attributes. Device or other specific type. |
| 1.3.6.1.4.1.11.2.14.11.5.1.32.1.5.5.1.2 | ColumnhpSwitchAutzUserRoleAdminEdgePort | read-create | current | The administrative value of the Edge Port parameter. A value of true(1) indicates that the port associated with this user-role should be assumed as an edge-por… |
| 1.3.6.1.4.1.11.2.14.11.5.1.32.1.5.5.1.3 | ColumnhpSwitchAutzUserRolePoePriority | read-create | current | This object controls the priority of the port from the point of view of a power management algorithm. The priority that is set by this variable could be used b… |
| 1.3.6.1.4.1.11.2.14.11.5.1.32.1.5.5.1.4 | ColumnhpSwitchAutzUserRolePoeAllocBy | read-create | current | This object indicates the power allocation method for this port. The default value is usage. |
| 1.3.6.1.4.1.11.2.14.11.5.1.32.1.5.5.1.5 | ColumnhpSwitchAutzUserRoleSubTypeRowStatus | read-create | current | The Row Status of this entry. To create a new entry, send an SNMP SET request with a RowStatus of 'createAndGo'. active - the entry is ready to use. notInServi… |
| 1.3.6.1.4.1.11.2.14.11.5.1.32.1.5.5.1.7 | ColumnhpSwitchAutzUserRolePortMode | read-create | current | This object indicates if the auth method on a port will be operating on a port mode or not. |
| 1.3.6.1.4.1.11.2.14.11.5.1.32.2 | NodehpSwitchAuthorizationConformance | |||
| 1.3.6.1.4.1.11.2.14.11.5.1.32.2.1 | NodehpSwitchAuthorizationMIBCompliances | |||
| 1.3.6.1.4.1.11.2.14.11.5.1.32.2.1.1 | CompliancehpSwitchAuthorizationMIBCompliance | current | The compliance statement for devices implementing the HP-AUTZ-MIB. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.32.2.1.2 | CompliancehpSwitchLocalMgmtPrivGrpMIBCompliance | read-only | deprecated | The compliance statement for listing the local management privilege methods to be tried for granting different access levels through various access tasks |
| 1.3.6.1.4.1.11.2.14.11.5.1.32.2.1.3 | CompliancehpSwitchLocalMgmtPrivGrpMIBCompliance1 | deprecated | The compliance statement for listing the local management privilege methods to be tried for granting different access levels through various access tasks | |
| 1.3.6.1.4.1.11.2.14.11.5.1.32.2.1.4 | CompliancehpSwitchAuthorizationObjectsGrpMIBCompliance | current | The compliance statement for listing the local management privilege methods to be tried for granting different access levels through various access tasks | |
| 1.3.6.1.4.1.11.2.14.11.5.1.32.2.1.5 | CompliancehpSwitchAuthorizationNotificationGrpMIBCompliance | current | The compliance statement for listing the local management privilege methods to be tried for granting different access levels through various access tasks | |
| 1.3.6.1.4.1.11.2.14.11.5.1.32.2.1.6 | CompliancehpSwitchAutzRoleGrpCompliance | deprecated | The compliance statement for user roles. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.32.2.1.7 | CompliancehpSwitchAutzRoleGrpCompliance1 | deprecated | The compliance statement for user roles. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.32.2.1.8 | CompliancehpSwitchAutzRoleGrpCompliance2 | deprecated | The compliance statement for user roles. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.32.2.1.9 | CompliancehpSwitchAutzRoleGrpCompliance3 | deprecated | The compliance statement for user roles. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.32.2.1.10 | CompliancehpSwitchAutzRoleGrpCompliance4 | deprecated | The compliance statement for user roles. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.32.2.1.11 | CompliancehpSwitchLocalMgmtPrivGrpMIBCompliance2 | read-only | current | The compliance statement for listing the local management privilege methods to be tried for granting different access levels through various access tasks |
| 1.3.6.1.4.1.11.2.14.11.5.1.32.2.1.12 | CompliancehpSwitchLocalMgmtPrivGrpMIBCompliance3 | current | The compliance statement for listing the local management privilege methods to be tried for granting different access levels through various access tasks | |
| 1.3.6.1.4.1.11.2.14.11.5.1.32.2.1.13 | CompliancehpSwitchAutzRoleGrpCompliance5 | deprecated | The compliance statement for user roles. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.32.2.1.14 | CompliancehpSwitchAutzRoleGrpCompliance6 | current | The compliance statement for user roles. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.32.2.2 | NodehpSwitchAuthorizationMIBGroups | |||
| 1.3.6.1.4.1.11.2.14.11.5.1.32.2.2.1 | GrouphpSwitchAuthorizationConfigGroup | current | A collection of objects to support authorization service. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.32.2.2.2 | GrouphpicfSwitchAuthorizationNotificationGroup | current | A group of switch authorization notifications. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.32.2.2.3 | GrouphpicfSwitchAuthorizationObjectsGroup | current | A group of switch authorization objects. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.32.2.2.4 | GrouphpSwitchAutzLocalMgmtPrivGroup | current | A collection of objects for configuring Local Manangement Privilege Groups | |
| 1.3.6.1.4.1.11.2.14.11.5.1.32.2.2.5 | GrouphpSwitchAutzLocalMgmtPrivGroup1 | current | A collection of objects for configuring Local Mangement Privilege Groups | |
| 1.3.6.1.4.1.11.2.14.11.5.1.32.2.2.6 | GrouphpSwitchAutzUserRoleGroup | deprecated | A collection of objects for supporting local user roles. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.32.2.2.7 | GrouphpSwitchAutzUserRoleGroup1 | deprecated | A collection of objects for supporting local user roles. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.32.2.2.8 | GrouphpSwitchAutzUserRoleGroup2 | deprecated | A collection of objects for supporting local user roles. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.32.2.2.9 | GrouphpSwitchAutzUserRoleGroup3 | deprecated | A collection of objects for supporting local user roles. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.32.2.2.10 | GrouphpSwitchAutzUserRoleGroup4 | deprecated | A collection of objects for supporting local user roles. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.32.2.2.13 | GrouphpSwitchAutzUserRoleGroup5 | deprecated | A collection of objects for supporting local user roles. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.32.2.2.14 | GrouphpSwitchAutzUserRoleGroup6 | current | A collection of objects for supporting local user roles. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| HpAutzUserRoleName | OCTET STRING (SIZE(1..63)) | current | User role name type. All printable ASCII characters are allowed except '.', ' ', and '~'. |