MIB Viewer

HP-ENTITY-MIB

48 objects
The MIB module for representing multiple logical entities supported by a single SNMP agent. This is an exact copy of draft 7 of the IETF Entity MIB. The only changes are to actually assign an OID to it, and add hp to the beginning of all the labels. This was done only because a product that uses this MIB is scheduled to ship before the IETF MIB will be published as an RFC, and we needed to give it an OID. It is expected that this MIB module will only be supported until the IETF actually publishes the official version as an RFC. At that time, we will support the IETF version of this MIB.
Imported Objects
HP-ICF-OIDicf
SNMPv2-CONFMODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP
SNMPv2-SMIMODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE
SNMPv2-TCAutonomousType DisplayString RowPointer TAddress TDomain TEXTUAL-CONVENTION TimeStamp
OIDNameAccessStatusDescription
1.3.6.1.4.1.11.2.14.9IdentityhpEntityMIBThe MIB module for representing multiple logical entities supported by a single SNMP agent. This is an exact copy of draft 7 of the IETF Entity MIB. The only c…
1.3.6.1.4.1.11.2.14.9.1NodehpEntityMIBObjects
1.3.6.1.4.1.11.2.14.9.1.1NodehpEntityPhysical
1.3.6.1.4.1.11.2.14.9.1.1.1TablehpEntPhysicalTablenot-accessibleobsoleteThis table contains one row per physical entity. There is always at least one row for an 'overall' physical entity.
1.3.6.1.4.1.11.2.14.9.1.1.1.1RowhpEntPhysicalEntrynot-accessibleobsoleteInformation about a particular physical entity. Each entry provides objects (hpEntPhysicalDescr, hpEntPhysicalVendorType, and hpEntPhysicalClass) to help an NM…
1.3.6.1.4.1.11.2.14.9.1.1.1.1.1ColumnhpEntPhysicalIndexnot-accessibleobsoleteThe index for this entry.
1.3.6.1.4.1.11.2.14.9.1.1.1.1.2ColumnhpEntPhysicalDescrread-onlyobsoleteA textual description of physical entity. This object should contain a string which identifies the manufacturer's name for the physical entity, and should be s…
1.3.6.1.4.1.11.2.14.9.1.1.1.1.3ColumnhpEntPhysicalVendorTyperead-onlyobsoleteAn indication of the vendor-specific hardware type of the physical entity. Note that this is different from the definition of MIB-II's sysObjectID. An agent sh…
1.3.6.1.4.1.11.2.14.9.1.1.1.1.4ColumnhpEntPhysicalContainedInread-onlyobsoleteThe value of hpEntPhysicalIndex for the physical entity which 'contains' this physical entity. A value of zero indicates this physical entity is not contained …
1.3.6.1.4.1.11.2.14.9.1.1.1.1.5ColumnhpEntPhysicalClassread-onlyobsoleteAn indication of the general hardware type of the physical entity. An agent should set this object to the standard enumeration value which most accurately indi…
1.3.6.1.4.1.11.2.14.9.1.1.1.1.6ColumnhpEntPhysicalParentRelPosread-onlyobsoleteAn indication of the relative position of this 'child' component among all its 'sibling' components. Sibling components are defined as hpEntPhysicalEntries whi…
1.3.6.1.4.1.11.2.14.9.1.1.1.1.7ColumnhpEntPhysicalNameread-onlyobsoleteThe textual name of the physical entity. The value of this object should be the name of the component as assigned by the local device and should be suitable fo…
1.3.6.1.4.1.11.2.14.9.1.2NodehpEntityLogical
1.3.6.1.4.1.11.2.14.9.1.2.1TablehpEntLogicalTablenot-accessibleobsoleteThis table contains one row per logical entity. At least one entry must exist.
1.3.6.1.4.1.11.2.14.9.1.2.1.1RowhpEntLogicalEntrynot-accessibleobsoleteInformation about a particular logical entity. Entities may be managed by this agent or other SNMP agents (possibly) in the same chassis.
1.3.6.1.4.1.11.2.14.9.1.2.1.1.1ColumnhpEntLogicalIndexnot-accessibleobsoleteThe value of this object uniquely identifies the logical entity. The value is a small positive integer; index values for different logical entities are are not…
1.3.6.1.4.1.11.2.14.9.1.2.1.1.2ColumnhpEntLogicalDescrread-onlyobsoleteA textual description of the logical entity. This object should contain a string which identifies the manufacturer's name for the logical entity, and should be…
1.3.6.1.4.1.11.2.14.9.1.2.1.1.3ColumnhpEntLogicalTyperead-onlyobsoleteAn indication of the type of logical entity. This will typically be the OBJECT IDENTIFIER name of the node in the SMI's naming hierarchy which represents the m…
1.3.6.1.4.1.11.2.14.9.1.2.1.1.4ColumnhpEntLogicalCommunityread-onlyobsoleteAn SNMPv1 or SNMPv2C community-string which can be used to access detailed management information for this logical entity. The agent should allow read access w…
1.3.6.1.4.1.11.2.14.9.1.2.1.1.5ColumnhpEntLogicalTAddressread-onlyobsoleteThe transport service address by which the logical entity receives network management traffic, formatted according to the corresponding value of hpEntLogicalTD…
1.3.6.1.4.1.11.2.14.9.1.2.1.1.6ColumnhpEntLogicalTDomainread-onlyobsoleteIndicates the kind of transport service by which the logical entity receives network management traffic. Possible values for this object are presently found in…
1.3.6.1.4.1.11.2.14.9.1.3NodehpEntityMapping
1.3.6.1.4.1.11.2.14.9.1.3.1TablehpEntLPMappingTablenot-accessibleobsoleteThis table contains zero or more rows of logical entity to physical equipment associations. For each logical entity known by this agent, there are zero or more…
1.3.6.1.4.1.11.2.14.9.1.3.1.1RowhpEntLPMappingEntrynot-accessibleobsoleteInformation about a particular logical entity to physical equipment association. Note that the nature of the association is not specifically identified in this…
1.3.6.1.4.1.11.2.14.9.1.3.1.1.1ColumnhpEntLPPhysicalIndexread-onlyobsoleteThe value of this object identifies the index value of a particular hpEntPhysicalEntry associated with the indicated hpEntLogicalEntity.
1.3.6.1.4.1.11.2.14.9.1.3.2TablehpEntAliasMappingTablenot-accessibleobsoleteThis table contains zero or more rows, representing mappings of logical entity and physical component to external MIB identifiers. Each physical port in the sy…
1.3.6.1.4.1.11.2.14.9.1.3.2.1RowhpEntAliasMappingEntrynot-accessibleobsoleteInformation about a particular physical equipment, logical entity to external identifier binding. Each logical entity/physical component pair may be associated…
1.3.6.1.4.1.11.2.14.9.1.3.2.1.1ColumnhpEntAliasLogicalIndexOrZeronot-accessibleobsoleteThe value of this object uniquely identifies the logical entity which defines the naming scope for the associated instance of the 'hpEntAliasMappingIdentifier'…
1.3.6.1.4.1.11.2.14.9.1.3.2.1.2ColumnhpEntAliasMappingIdentifierread-onlyobsoleteThe value of this object identifies a particular conceptual row associated with the indicated hpEntPhysicalIndex and hpEntLogicalIndex pair. Since only physica…
1.3.6.1.4.1.11.2.14.9.1.3.3TablehpEntPhysicalContainsTablenot-accessibleobsoleteA table which exposes the container/containee relationships between physical entities. This table provides equivalent information found by constructing the vir…
1.3.6.1.4.1.11.2.14.9.1.3.3.1RowhpEntPhysicalContainsEntrynot-accessibleobsoleteA single container/containee relationship.
1.3.6.1.4.1.11.2.14.9.1.3.3.1.1ColumnhpEntPhysicalChildIndexread-onlyobsoleteThe value of hpEntPhysicalIndex for the contained physical entity.
1.3.6.1.4.1.11.2.14.9.1.4NodehpEntityGeneral
1.3.6.1.4.1.11.2.14.9.1.4.1ScalarhpEntLastChangeTimeread-onlyobsoleteThe value of sysUpTime at the time any of these events occur: * a conceptual row is created or deleted in any of these tables: - hpEntPhysicalTable - hpEntLogi…
1.3.6.1.4.1.11.2.14.9.2NodehpEntityMIBTraps
1.3.6.1.4.1.11.2.14.9.2.0NodehpEntityMIBTrapPrefix
1.3.6.1.4.1.11.2.14.9.2.0.1NotificationhpEntConfigChangeobsoleteAn hpEntConfigChange trap is sent when the value of hpEntLastChangeTime changes. It can be utilized by an NMS to trigger logical/physical entity table maintena…
1.3.6.1.4.1.11.2.14.9.3NodehpEntityConformance
1.3.6.1.4.1.11.2.14.9.3.1NodehpEntityCompliances
1.3.6.1.4.1.11.2.14.9.3.1.1CompliancehpEntityComplianceobsoleteThe compliance statement for SNMP entities which implement the Entity MIB.
1.3.6.1.4.1.11.2.14.9.3.2NodehpEntityGroups
1.3.6.1.4.1.11.2.14.9.3.2.1GrouphpEntityPhysicalGroupobsoleteThe collection of objects which are used to represent physical system components, for which a single agent provides management information.
1.3.6.1.4.1.11.2.14.9.3.2.2GrouphpEntityLogicalGroupobsoleteThe collection of objects which are used to represent the list of logical entities for which a single agent provides management information.
1.3.6.1.4.1.11.2.14.9.3.2.3GrouphpEntityMappingGroupobsoleteThe collection of objects which are used to represent the associations between multiple logical entities, physical components, interfaces, and port identifiers…
1.3.6.1.4.1.11.2.14.9.3.2.4GrouphpEntityGeneralGroupobsoleteThe collection of objects which are used to represent general entity information for which a single agent provides management information.
1.3.6.1.4.1.11.2.14.9.3.2.5GrouphpEntityNotificationsGroupobsoleteThe collection of notifications used to indicate Entity MIB data consistency and general status information.
Type Definitions
NameSyntaxStatusDescription
PhysicalClassINTEGER { other(1), unknown(2), chassis(3), backplane(4), container(5), powerSupply(6), fan(7), sensor(8), module(9), port(10) }currentAn enumerated value which provides an indication of the general hardware type of a particular physical entity.
PhysicalIndexINTEGER (1..2147483647)currentAn arbitrary value which uniquely identifies the physical entity. The value is a small positive integer; index values for different physical entities are not necessarily contiguous.