HP-ICF-BRIDGE
109 objects
This MIB module contains HP proprietary extensions to the standard Bridge MIBs.
Imported Objects
| BRIDGE-MIB | dot1dBasePortEntry |
| HP-ICF-FTRCO | VidList |
| HP-ICF-OID | hpSwitch |
| HP-ICF-TC | ConfigStatus |
| IF-MIB | ifIndex |
| Q-BRIDGE-MIB | dot1qVlanStaticEntry VlanId VlanIndex |
| SMON-MIB | portCopyEntry |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE |
| SNMPv2-TC | TEXTUAL-CONVENTION TimeStamp TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.5.1.12 | IdentityhpicfBridge | This MIB module contains HP proprietary extensions to the standard Bridge MIBs. | ||
| 1.3.6.1.4.1.11.2.14.11.5.1.12.1 | NodehpicfBridgeObjects | |||
| 1.3.6.1.4.1.11.2.14.11.5.1.12.1.1 | NodehpicfBridgeBase | |||
| 1.3.6.1.4.1.11.2.14.11.5.1.12.1.1.1 | ScalarhpicfBridgeMaxVlans | read-write | current | Defines the number of VLANs that the switch will support for dynamic use without requiring a reboot. |
| 1.3.6.1.4.1.11.2.14.11.5.1.12.1.1.2 | ScalarhpicfBridgeVlanEnable | read-write | current | Administrative status of VLAN support on this switch. |
| 1.3.6.1.4.1.11.2.14.11.5.1.12.1.1.3 | ScalarhpicfBridgePrimaryVlan | read-write | current | The 802.1Q VLAN ID of the primary VLAN for this switch. |
| 1.3.6.1.4.1.11.2.14.11.5.1.12.1.1.4 | ScalarhpicfBridgeVlanConfigStatus | read-only | current | If one or more variables in this group has been reconfigured since the last reboot in such a way as to require a reboot to take effect, the value of this varia… |
| 1.3.6.1.4.1.11.2.14.11.5.1.12.1.2 | NodehpicfBridgeGvrp | |||
| 1.3.6.1.4.1.11.2.14.11.5.1.12.1.2.1 | TablehpicfBridgeGvrpPortTable | not-accessible | current | A table that contains information about the GVRP port configurations on this switch. |
| 1.3.6.1.4.1.11.2.14.11.5.1.12.1.2.1.1 | RowhpicfBridgeGvrpPortEntry | not-accessible | current | GVRP information associated with a single port. |
| 1.3.6.1.4.1.11.2.14.11.5.1.12.1.2.1.1.1 | ColumnhpicfBridgeGvrpRestrictedVlanReg | read-write | current | Controls GVRP's ability to learn new VLANs on this port. When set to 'false', GVRP will accept JOIN requests for new VLANs on this port. When set to 'true', GV… |
| 1.3.6.1.4.1.11.2.14.11.5.1.12.1.2.2 | TablehpicfBridgeGvrpStateMachineTable | not-accessible | current | A table that contains information about the GVRP state Machine(s) configuration. |
| 1.3.6.1.4.1.11.2.14.11.5.1.12.1.2.2.1 | RowhpicfBridgeGvrpStateMachineEntry | not-accessible | current | A row in a table, containing the VLAN ID and Portlist. |
| 1.3.6.1.4.1.11.2.14.11.5.1.12.1.2.2.1.1 | ColumnhpicfGenericVlanId | not-accessible | current | The VLAN ID to which this entry belongs. |
| 1.3.6.1.4.1.11.2.14.11.5.1.12.1.2.2.1.2 | ColumnhpicfApplicantStateMachine | read-only | current | This MIB provides the Applicant State Machine values of the GVRP enabled port as follows,0 = va, 1 = aa,2 = qa, 3 = la,4 = vp,5 = ap,6 = qp,7 = vo,8 = ao,9 = q… |
| 1.3.6.1.4.1.11.2.14.11.5.1.12.1.2.2.1.3 | ColumnhpicfRegistarStateMachine | read-only | current | This MIB provides the Registrar state machine value for the GVRP enabled port as follows,0 = inn,1 = lv,2 = l3,3 = l2, 4 = l1,5 = mt,6 = inr,7 = lvr,8 = l3r,9 … |
| 1.3.6.1.4.1.11.2.14.11.5.1.12.1.4 | NodehpicfBridgeRstp | |||
| 1.3.6.1.4.1.11.2.14.11.5.1.12.1.4.1 | ScalarhpicfBridgeRstpForceVersion | read-write | current | The operational mode of the Spanning Tree Protocol. A value of stpCompatibility (0) indicates that the Spanning Tree Protocol operates in IEEE 802.1d mode on a… |
| 1.3.6.1.4.1.11.2.14.11.5.1.12.1.4.2 | ScalarhpicfBridgeRstpConfigStatus | read-only | current | The configuration status of this group of objects. The value of this object is set to 'notInService' if any variable in this group is reconfigured since the la… |
| 1.3.6.1.4.1.11.2.14.11.5.1.12.1.4.3 | ScalarhpicfBridgeRstpProtocolVersion | read-write | current | The version of Spanning Tree Protocol currently running on the switch. - ieee8021d is the version of Spanning Tree Protocol defined as IEEE 802.1d (STP). - iee… |
| 1.3.6.1.4.1.11.2.14.11.5.1.12.1.4.4 | ScalarhpicfBridgeRstpAdminStatus | read-write | current | The operational status of the Spanning Tree Protocol |
| 1.3.6.1.4.1.11.2.14.11.5.1.12.1.4.5 | TablehpicfBridgeRstpPortTable | not-accessible | current | A table that contains information about STP configuration on all ports. |
| 1.3.6.1.4.1.11.2.14.11.5.1.12.1.4.5.1 | RowhpicfBridgeRstpPortEntry | not-accessible | current | An entry in the hpicfBridgeRstpPortTable which holds the information of STP configuration of a port. An entry is available for each port in this table. |
| 1.3.6.1.4.1.11.2.14.11.5.1.12.1.4.5.1.1 | ColumnhpicfBridgeRstpPortIndex | read-only | current | The port number of the port for which this entry contains Spanning Tree Protocol management information. |
| 1.3.6.1.4.1.11.2.14.11.5.1.12.1.4.5.1.2 | ColumnhpicfBridgeRstpAdminEdgePort | read-write | current | Indicate that port is connected to LAN segment that don't have any bridge connected to it |
| 1.3.6.1.4.1.11.2.14.11.5.1.12.1.4.5.1.3 | ColumnhpicfBridgeRstpOperEdgePort | read-only | current | Reflects the value of the operEdgePort parameter, as defined by the operation of the Bridge Detection state machine (Clause 18 of P802.1t). The value of this p… |
| 1.3.6.1.4.1.11.2.14.11.5.1.12.1.4.5.1.4 | ColumnhpicfBridgeRstpAdminPointToPointMac | read-write | current | forceTrue: This value indicates that the administrator requires the MAC to be treated as if it is connected to a point-to-point LAN segment, regardless of any … |
| 1.3.6.1.4.1.11.2.14.11.5.1.12.1.4.5.1.5 | ColumnhpicfBridgeRstpOperPointToPointMac | read-only | current | true: This value indicates that the MAC is connected to a point-to-point LAN segment; i.e., there is at most one other system attached to the LAN segment. fals… |
| 1.3.6.1.4.1.11.2.14.11.5.1.12.1.4.5.1.6 | ColumnhpicfBridgeRstpPortPathCost | read-write | current | The administratively assigned value for the contribution of this port to the path cost of paths toward the spanning tree root. Writing a value of '0' assigns t… |
| 1.3.6.1.4.1.11.2.14.11.5.1.12.1.4.5.1.7 | ColumnhpicfBridgeRstpForceBpduMigrationCheck | read-write | current | When operating in RSTP version 2 or later, writing TRUE(1) to this object forces this port to transmit RSTP BPDUs. Any other operation on this object always re… |
| 1.3.6.1.4.1.11.2.14.11.5.1.12.1.4.5.1.8 | ColumnhpicfBridgeRstpAutoEdgePort | read-write | current | This object determines the identification of edge ports. When set to TRUE, it is used by the bridge detection state machine for automatic identification of edg… |
| 1.3.6.1.4.1.11.2.14.11.5.1.12.1.4.5.1.9 | ColumnhpicfBridgeRstpPortBpduFiltering | read-write | current | This objects determines the BPDU filtering on ports. When set to TRUE, the port does not transmit any BPDU and all the received BPDUs are dropped. When set to … |
| 1.3.6.1.4.1.11.2.14.11.5.1.12.1.4.6 | NodehpicfBridgeStpBpduThrottleConfig | |||
| 1.3.6.1.4.1.11.2.14.11.5.1.12.1.4.6.1 | ScalarhpicfBridgeStpBpduThrottleStatus | read-write | current | This object is used to enable or disable the BPDU Throttling feature on the device. |
| 1.3.6.1.4.1.11.2.14.11.5.1.12.1.4.6.2 | ScalarhpicfBridgeStpBpduThrottleValue | read-write | current | This object provides the inbound rate limit value to throttle the MSTP BPDUs on the device. The valid throttle values are 64, 128, and 256 packets per second (… |
| 1.3.6.1.4.1.11.2.14.11.5.1.12.1.5 | NodehpicfBridgeLoopProtect | |||
| 1.3.6.1.4.1.11.2.14.11.5.1.12.1.5.0 | NodehpicfBridgeLoopProtectNotifications | |||
| 1.3.6.1.4.1.11.2.14.11.5.1.12.1.5.0.1 | NotificationhpicfBridgeLoopProtectLoopDetectedNotification | current | A hpicfBridgeLoopProtectLoopDetectedNotification signifies that a loop is detected by the Loop Protection Protocol. Generation of this notification is controll… | |
| 1.3.6.1.4.1.11.2.14.11.5.1.12.1.5.0.2 | NotificationhpicfBridgeVlanLoopProtectLoopDetectedNotification | current | A hpicfBridgeLoopProtectLoopDetectedNotification signifies that a loop is detected by the Loop Protection feature while operating in VLAN mode. Generation of t… | |
| 1.3.6.1.4.1.11.2.14.11.5.1.12.1.5.1 | NodehpicfBridgeLoopProtectBase | |||
| 1.3.6.1.4.1.11.2.14.11.5.1.12.1.5.1.1 | ScalarhpicfBridgeLoopProtectInterval | read-write | current | The interval in seconds at which Loop Protection packets are transmitted. The default value is 5 seconds. |
| 1.3.6.1.4.1.11.2.14.11.5.1.12.1.5.1.2 | ScalarhpicfBridgeLoopProtectTrapLoopDetectEnable | read-write | current | Indicates whether notifications should be sent when a loop is detected on a port. By default this object will have a value of false(2). |
| 1.3.6.1.4.1.11.2.14.11.5.1.12.1.5.1.3 | ScalarhpicfBridgeLoopProtectEnableTimer | read-write | current | The time in seconds to wait before re-enabling a port disabled by Loop Protection. When a port is disabled by Loop Protection, a re-enable timer for the port i… |
| 1.3.6.1.4.1.11.2.14.11.5.1.12.1.5.1.4 | ScalarhpicfBridgeLoopProtectMode | read-write | current | This object is used to configure the operational mode of Loop Protection feature. The Loop Protection feature can be configured to operate in port mode or VLAN… |
| 1.3.6.1.4.1.11.2.14.11.5.1.12.1.5.1.5 | ScalarhpicfBridgeLoopProtectVIDList | read-write | current | A list of VLANs on which Loop Protection is enabled. |
| 1.3.6.1.4.1.11.2.14.11.5.1.12.1.5.2 | NodehpicfBridgeLoopProtectPort | |||
| 1.3.6.1.4.1.11.2.14.11.5.1.12.1.5.2.1 | TablehpicfBridgeLoopProtectPortTable | not-accessible | current | Per-interface configuration for Loop Protection. |
| 1.3.6.1.4.1.11.2.14.11.5.1.12.1.5.2.1.1 | RowhpicfBridgeLoopProtectPortEntry | not-accessible | current | Loop Protection configuration information for a single port. |
| 1.3.6.1.4.1.11.2.14.11.5.1.12.1.5.2.1.1.1 | ColumnhpicfBridgeLoopProtectPortEnable | read-write | current | This object indicates whether the Loop Protection is enabled on a port. The default value is FALSE |
| 1.3.6.1.4.1.11.2.14.11.5.1.12.1.5.2.1.1.2 | ColumnhpicfBridgeLoopProtectPortLoopDetected | read-only | current | This object will be set to TRUE when a loop is detected on the port. The value of this object will be reset to FALSE when the port's hpicfBridgeLoopProtectPort… |
| 1.3.6.1.4.1.11.2.14.11.5.1.12.1.5.2.1.1.3 | ColumnhpicfBridgeLoopProtectPortLastLoopTime | read-only | current | The value of sysUpTime when a loop was last detected on this port. A value of 0 means that the timestamp has not been set. |
| 1.3.6.1.4.1.11.2.14.11.5.1.12.1.5.2.1.1.4 | ColumnhpicfBridgeLoopProtectPortLoopCount | read-only | current | This object provides the number of loops detected on a Loop Protection enabled port. The value of this object is set to zero when Loop Protection is disabled o… |
| 1.3.6.1.4.1.11.2.14.11.5.1.12.1.5.2.1.1.5 | ColumnhpicfBridgeLoopProtectPortReceiverAction | read-write | current | Controls the action taken when a Loop Protection packet is received on this port. When set to 'disableTx' the port that transmitted the packet is disabled. Whe… |
| 1.3.6.1.4.1.11.2.14.11.5.1.12.1.5.2.1.1.6 | ColumnhpicfBridgeLoopDetectedVlan | read-only | current | Refers to this object for the port on which loop is detected. |
| 1.3.6.1.4.1.11.2.14.11.5.1.12.1.6 | NodehpicfBridgeMirrorSession | |||
| 1.3.6.1.4.1.11.2.14.11.5.1.12.1.6.1 | NodehpicfBridgeMirrorSessionBase | |||
| 1.3.6.1.4.1.11.2.14.11.5.1.12.1.6.2 | NodehpicfBridgeMirrorSessionDestination | |||
| 1.3.6.1.4.1.11.2.14.11.5.1.12.1.6.2.1 | TablehpicfBridgeMirrorSessionTable | not-accessible | current | This table contains mirror session information related to a given specified destination. A mirror session is a group of one or more portCopyEntries all having … |
| 1.3.6.1.4.1.11.2.14.11.5.1.12.1.6.2.1.1 | RowhpicfBridgeMirrorSessionEntry | not-accessible | current | An entry in the hpicfBridgeMirrorSessionEntry contains mirror session specific identification information. |
| 1.3.6.1.4.1.11.2.14.11.5.1.12.1.6.2.1.1.1 | ColumnhpicfBridgeMirrorSessionID | read-create | current | This variable is valid only for mirroring transfers. It allows mirroring destinations to be grouped. A given hpicfBridgeMirrorSessionID can only be used with 1… |
| 1.3.6.1.4.1.11.2.14.11.5.1.12.1.6.2.1.1.2 | ColumnhpicfBridgeDontTagWithVlan | read-write | current | This objects determines whether to include IEEE 802.1Q tag in the mirrored copy of the packet. When the value of this object is set to 1 ('enabled'), the IEEE … |
| 1.3.6.1.4.1.11.2.14.11.5.1.12.1.6.2.1.1.3 | ColumnhpicfBridgeMirrorSessionType | read-write | current | This oid mentions what is the source type of traffic associated with mirror session. noMirror Not associated with any mirroring. mirrorAddresses Mirror traffic… |
| 1.3.6.1.4.1.11.2.14.11.5.1.12.1.7 | NodehpicfBridgeVoiceVlanConfig | |||
| 1.3.6.1.4.1.11.2.14.11.5.1.12.1.7.1 | TablehpicfBridgeVoiceVlanConfigTable | not-accessible | current | An HP proprietary extension to the dot1qVlanStaticTable to configure a Voice VLAN. |
| 1.3.6.1.4.1.11.2.14.11.5.1.12.1.7.1.1 | RowhpicfBridgeVoiceVlanConfigEntry | not-accessible | current | An entry for HP Specific extension table. |
| 1.3.6.1.4.1.11.2.14.11.5.1.12.1.7.1.1.1 | ColumnhpicfBridgeVoiceVlanEnable | read-write | current | Labels the VLAN as a Voice VLAN which allows to separate, prioritize, and authenticate voice traffic moving through the network. |
| 1.3.6.1.4.1.11.2.14.11.5.1.12.1.8 | NodehpicfBridgeJumboInterfaceConfig | |||
| 1.3.6.1.4.1.11.2.14.11.5.1.12.1.8.1 | TablehpicfBridgeJumboInterfaceConfigTable | not-accessible | current | This table contains the jumbo frame configuration of all interfaces. |
| 1.3.6.1.4.1.11.2.14.11.5.1.12.1.8.1.1 | RowhpicfBridgeJumboInterfaceConfigEntry | not-accessible | current | An entry in the hpicfBridgeJumboInterfaceConfigTable, which contains the jumbo frame configuration of an interface. |
| 1.3.6.1.4.1.11.2.14.11.5.1.12.1.8.1.1.1 | ColumnhpicfBridgeJumboInterfaceEnable | read-write | current | This object enables or disables the support for jumbo frames. This configuration is supported only on VLAN interfaces. |
| 1.3.6.1.4.1.11.2.14.11.5.1.12.1.9 | NodehpicfBridgeManagementInterfaceConfig | |||
| 1.3.6.1.4.1.11.2.14.11.5.1.12.1.9.1 | TablehpicfBridgeManagementInterfaceConfigTable | not-accessible | current | This table contains objects for configuring interface as Management interface. |
| 1.3.6.1.4.1.11.2.14.11.5.1.12.1.9.1.1 | RowhpicfBridgeManagementInterfaceConfigEntry | not-accessible | current | An entry in the hpicfBridgeManagementInterfaceConfigEntry contains objects for configuring interface as management interface. |
| 1.3.6.1.4.1.11.2.14.11.5.1.12.1.9.1.1.1 | ColumnhpicfBridgeManagementInterfaceEnable | read-write | current | This object configures a VLAN as a Secure Management VLAN. When the value of this object is set to TRUE, a VLAN acts as a Secure Management VLAN. The default v… |
| 1.3.6.1.4.1.11.2.14.11.5.1.12.2 | NodehpicfBridgeConformance | |||
| 1.3.6.1.4.1.11.2.14.11.5.1.12.2.1 | NodehpicfBridgeGroups | |||
| 1.3.6.1.4.1.11.2.14.11.5.1.12.2.1.1 | GrouphpicfBridgeVlanBaseGroup | current | Basic VLAN configuration information that is not in the standard 802.1Q Bridge MIB. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.12.2.1.2 | GrouphpicfBridgeGvrpPortGroup | deprecated | ********* THIS GROUP IS DEPRECATED ********* GVRP configuration information that is not (yet) in the standard 802.1Q Bridge MIB. Note that this information is … | |
| 1.3.6.1.4.1.11.2.14.11.5.1.12.2.1.3 | GrouphpicfBridgeRstpBaseGroup | current | Rapid Spanning Tree Protocol (RSTP) configuration information that is in neither the standard 802.1w MIB, nor the standard 802.1d (STP) MIB. Note that as RSTP … | |
| 1.3.6.1.4.1.11.2.14.11.5.1.12.2.1.4 | GrouphpicfBridgeLoopProtectBaseGroup | current | A collection of objects providing basic instrumentation and control of the HP Loop protection entity. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.12.2.1.5 | GrouphpicfBridgeMirrorSessionBaseGroup | current | A collection of objects providing identification of a mirroring session entity. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.12.2.1.7 | GrouphpicfBridgeVoiceVlanConfigGroup | current | A collection of objects for voice configuration on vlan. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.12.2.1.8 | GrouphpicfBridgeJumboInterfaceConfigGroup | current | A collection of objects providing Jumbo configuration on a interface. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.12.2.1.9 | GrouphpicfBridgeManagementInterfaceConfigGroup | current | A collection of objects for management interface configuration. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.12.2.1.10 | GrouphpicfBridgeLoopProtectVLANGroup | current | A collection of objects providing support for Loop Protect per VLAN feature. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.12.2.1.11 | GrouphpicfBridgeRstpPortEntryGroup | current | A collection of objects providing support for Rstp. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.12.2.1.12 | GrouphpicfBridgeMirrorSessionEntryGroup | current | A collection of objects providing mirror session information related to a given specific destination. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.12.2.1.13 | GrouphpicfBridgeRstpPortEntryGroup1 | current | A collection of objects providing support for Rstp. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.12.2.1.14 | GrouphpicfBridgeGvrpPortGroup1 | current | GVRP configuration information that is not (yet) in the standard 802.1Q Bridge MIB. Note that this information is very likely to be added to a future update of… | |
| 1.3.6.1.4.1.11.2.14.11.5.1.12.2.1.15 | GrouphpicfBridgeStpBpduThrottleConfigGroup | current | A group of objects that are used to configure the BPDU Throttling feature. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.12.2.2 | NodehpicfBridgeCompliances | |||
| 1.3.6.1.4.1.11.2.14.11.5.1.12.2.2.1 | CompliancehpicfBridgeCompliance | deprecated | The compliance statement for HP Switches with IEEE 802.1Q VLAN support for bridging objects not found in the standard Bridge MIBs. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.12.2.2.2 | CompliancehpicfBridgeComplianceRevTwo | deprecated | The compliance statement for HP Switches with IEEE 802.1W Rapid Spanning Tree Protocol support for bridging objects not found in the standard Bridge MIBs. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.12.2.2.3 | CompliancehpicfBridgeComplianceRevThree | deprecated | The compliance statement for HP Switches with IEEE 802.1W Rapid Spanning Tree Protocol support for bridging objects not found in the standard Bridge MIBs. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.12.2.2.4 | CompliancehpicfBridgeComplianceRevFour | deprecated | The compliance statement for HP Switches with IEEE 802.1W Rapid Spanning Tree Protocol support for bridging objects not found in the standard Bridge MIBs. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.12.2.2.5 | CompliancehpicfBridgeLoopProtectCompliance | current | The compliance statement for HP Switches with support for hpicfBridge loop protection objects. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.12.2.2.6 | CompliancehpicfBridgeVlanBaseConfigCompliance | current | The compliance statement for HP Switches that support basic vlan configuration. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.12.2.2.7 | CompliancehpicfBridgeInterfaceConfigCompliance | current | The compliance statement for HP Switches that support basic interface configuration. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.12.2.2.8 | CompliancehpicfBridgeVlanLoopProtConfigCompliance | current | The compliance statement for HP Switches that support loop protect per VLAN feature. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.12.2.2.9 | CompliancehpicfBridgeRstpPortEntryCompliance | current | The compliance statement for HP Switches that support Rstp. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.12.2.2.10 | CompliancehpicfBridgeMirrorSessionEntryCompliance | current | The compliance statement for HP Switches that support mirror sessions. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.12.2.2.11 | CompliancehpicfBridgeRstpPortEntryCompliance1 | current | The compliance statement for HP Switches that support Rstp. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.12.2.2.12 | CompliancehpicfBridgeComplianceRevFour1 | current | The compliance statement for HP Switches with IEEE 802.1W Rapid Spanning Tree Protocol support for bridging objects not found in the standard Bridge MIBs. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.12.2.2.13 | CompliancehpicfBridgeStpBpduThrottleConfigCompliance | current | The compliance statement for the MSTP BPDU Throttling feature. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.12.2.3 | NodehpicfBridgeNotGroups | |||
| 1.3.6.1.4.1.11.2.14.11.5.1.12.2.3.1 | GrouphpicfBridgeLoopProtectNotGrp | current | Notifications for Loop protection. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.12.2.3.2 | GrouphpicfBridgeVlanLoopProtectNotGrp | current | Notifications for Loop protect per VLAN |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| BridgeId | OCTET STRING (SIZE (8)) | current | The Bridge Identifier as used in the Spanning Tree Protocol to uniquely identify a bridge. |
| LoopProtectReceiverAction | INTEGER { disableTx(1), noDisable(2), disableTxRx(3), disableRx(4) } | current | This TC describes the actions a port that receives a Loop Protection Protocol packet can take. The disableTx(1) enumeration indicates that the sender of the Loop Protect packet will be disabled. The noDisable(2) enumera… |