HP-ICF-FAULT-FINDER-MIB
70 objects
This MIB module contains object definitions for managing the Fault Finder feature in web-capable HP devices.
Imported Objects
| ENTITY-MIB | PhysicalClass PhysicalIndex |
| HP-ICF-OID | hpicfCommon hpicfCommonTrapsPrefix hpicfObjectModules |
| IF-MIB | ifIndex InterfaceIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | TEXTUAL-CONVENTION TimeStamp |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11.2.14.10.2.12 | IdentityhpicfFaultFinderMib | This MIB module contains object definitions for managing the Fault Finder feature in web-capable HP devices. | ||
| 1.3.6.1.4.1.11.2.14.10.2.12.1 | NodehpicfFaultFinderConformance | |||
| 1.3.6.1.4.1.11.2.14.10.2.12.1.1 | NodehpicfFaultFinderCompliances | |||
| 1.3.6.1.4.1.11.2.14.10.2.12.1.1.1 | CompliancehpicfFaultFinderCompliance | read-only | current | The compliance statement for devices implementing the HP Fault Finder capability. |
| 1.3.6.1.4.1.11.2.14.10.2.12.1.1.2 | CompliancehpicfFaultFinder2Compliance | read-only | current | The compliance statement for devices implementing the HP Fault Finder capability. |
| 1.3.6.1.4.1.11.2.14.10.2.12.1.1.3 | CompliancehpicfFaultStatusCompliance | current | The compliance statement for devices implementing the switch fault status. | |
| 1.3.6.1.4.1.11.2.14.10.2.12.1.1.4 | CompliancehpicfFaultFinder3Compliance | current | The compliance statement for devices implementing the HP Fault Finder capability. | |
| 1.3.6.1.4.1.11.2.14.10.2.12.1.1.5 | CompliancehpicfFaultFinder4Compliance | current | The compliance statement for devices implementing the HP Fault Finder capability. | |
| 1.3.6.1.4.1.11.2.14.10.2.12.1.1.6 | CompliancehpicfFaultFinder5Compliance | current | The compliance statement for devices implementing the HP Fault Finder capability. | |
| 1.3.6.1.4.1.11.2.14.10.2.12.1.2 | NodehpicfFaultFinderGroups | |||
| 1.3.6.1.4.1.11.2.14.10.2.12.1.2.1 | GrouphpicfFaultConfigGroup | current | A collection of objects for configuring the Fault Finder feature. | |
| 1.3.6.1.4.1.11.2.14.10.2.12.1.2.2 | GrouphpicfFaultLogGroup | current | A collection of objects for accessing the log of discovered faults. | |
| 1.3.6.1.4.1.11.2.14.10.2.12.1.2.3 | GrouphpicfFaultNotifyGroup | current | A collection of notifications used to indicate the discovery of a network fault. | |
| 1.3.6.1.4.1.11.2.14.10.2.12.1.2.4 | GrouphpicfFaultConfig2Group | current | A collection of objects for configuring the Fault Finder feature, including the ability to reduce a port's media speed in the event of a fault. | |
| 1.3.6.1.4.1.11.2.14.10.2.12.1.2.5 | GrouphpicfFaultStatusGroup | current | A collection of objects used to indicate fault status. | |
| 1.3.6.1.4.1.11.2.14.10.2.12.1.2.6 | GrouphpicfFaultConfig3Group | current | A collection of objects for configuring the Fault Finder broadcast storm feature on a per per port basis, including the ability to disable a port in the event … | |
| 1.3.6.1.4.1.11.2.14.10.2.12.1.2.7 | GrouphpicfFaultConfig4Group | current | A collection of objects for configuring the Fault Finder Link Flap feature on a per per port basis, including the ability to disable a port in the event of a f… | |
| 1.3.6.1.4.1.11.2.14.10.2.12.1.2.8 | GrouphpicfFaultConfig5Group | current | A collection of objects for configuring the Fault Finder multicast storm feature on a per per port basis, including the ability to disable a port in the event … | |
| 1.3.6.1.4.1.11.2.14.11.1.7 | NodehpicfFaultFinder | |||
| 1.3.6.1.4.1.11.2.14.11.1.7.1 | TablehpicfFfControlTable | not-accessible | current | This table contains one entry per fault type that this agent is capable of monitoring. |
| 1.3.6.1.4.1.11.2.14.11.1.7.1.1 | RowhpicfFfControlEntry | not-accessible | current | Configuration information for a particular fault type. |
| 1.3.6.1.4.1.11.2.14.11.1.7.1.1.1 | ColumnhpicfFfControlIndex | not-accessible | current | The type of fault for which this entry contains configuration information. |
| 1.3.6.1.4.1.11.2.14.11.1.7.1.1.2 | ColumnhpicfFfAction | read-write | current | This object is used to configure the action, if any, to be taken if a fault of this type is detected by the agent. Setting an instance of this object to 'none'… |
| 1.3.6.1.4.1.11.2.14.11.1.7.1.1.3 | ColumnhpicfFfWarnTolerance | read-write | current | The tolerance level used to calculate the fault warning threshold for this fault type. The agent will periodically check relevant statistics for each port for … |
| 1.3.6.1.4.1.11.2.14.11.1.7.1.1.4 | ColumnhpicfFfDisablePortTolerance | read-write | current | The tolerance level used to calculate the port disable threshold for this fault type. The value of an instance of this object MUST be greater than the value of… |
| 1.3.6.1.4.1.11.2.14.11.1.7.1.1.5 | ColumnhpicfFfSpeedReduceTolerance | read-write | current | The tolerance level used to calculate the speed reduction threshold for this fault type. The value of an instance of this object MUST be greater than the value… |
| 1.3.6.1.4.1.11.2.14.11.1.7.2 | TablehpicfFfLogTable | not-accessible | current | A log of fault warnings and ports disabled by the Fault Finder. |
| 1.3.6.1.4.1.11.2.14.11.1.7.2.1 | RowhpicfFfLogEntry | not-accessible | current | An entry in the Fault Finder log, containing information about a single fault. |
| 1.3.6.1.4.1.11.2.14.11.1.7.2.1.1 | ColumnhpicfFfLogIndex | not-accessible | current | An arbitrary value which uniquely identifies this log entry. The index for a particular log entry must not change, even though entries with lower valued indice… |
| 1.3.6.1.4.1.11.2.14.11.1.7.2.1.2 | ColumnhpicfFfLogCreateTime | read-only | current | The value of sysUpTime when this log entry was added to the hpicfFfLogTable. |
| 1.3.6.1.4.1.11.2.14.11.1.7.2.1.3 | ColumnhpicfFfLogPhysEntity | read-only | current | The entPhysicalIndex of the device port or other physical component on which the fault was detected. On agents which do not implement the Entity MIB, this will… |
| 1.3.6.1.4.1.11.2.14.11.1.7.2.1.4 | ColumnhpicfFfLogFaultType | read-only | current | The type of fault which was detected on the physical entity indicated by hpicfFfLogPhysEntity. |
| 1.3.6.1.4.1.11.2.14.11.1.7.2.1.5 | ColumnhpicfFfLogAction | read-only | current | The action, if any, that was taken by the agent when this fault was detected. |
| 1.3.6.1.4.1.11.2.14.11.1.7.2.1.6 | ColumnhpicfFfLogSeverity | read-only | current | The severity level of the fault. Port disables will always be logged as 'critical'. An agent may need to remove faults from the fault log in order to reclaim r… |
| 1.3.6.1.4.1.11.2.14.11.1.7.2.1.7 | ColumnhpicfFfLogStatus | read-write | current | Log entries will initially be created with the value 'new'. A manager cannot set this object to 'new'. Setting this object to 'active' indicates that the fault… |
| 1.3.6.1.4.1.11.2.14.11.1.7.2.1.8 | ColumnhpicfFfLogPhysClass | read-only | current | The PhysicalClass as defined by Entity MIB to which this hpicfFfLogPhysIndex belongs. |
| 1.3.6.1.4.1.11.2.14.11.1.7.2.1.9 | ColumnhpicfFfLogInfoType | read-only | current | This field can be used to indicate the class of information that 'hpicfFfLogInfo' holds |
| 1.3.6.1.4.1.11.2.14.11.1.7.2.1.10 | ColumnhpicfFfLogInfo | read-only | current | This can be used to hold any relevant information about the current fault |
| 1.3.6.1.4.1.11.2.14.11.1.7.3 | ScalarhpicfFfFaultInfoURL | accessible-for-notify | current | A URL which a management station can use to access additional information about the fault which triggered the notification in which this object was sent. |
| 1.3.6.1.4.1.11.2.14.11.1.7.4 | ScalarhpicfFfFaultLightStatus | read-only | current | This indicates the current state of the switch fault light. Examples of faults that could cause the LED to be turned on include fan, power supply, and port lin… |
| 1.3.6.1.4.1.11.2.14.11.1.7.5 | NodehpicfFfBcastStormControlPortConfig | |||
| 1.3.6.1.4.1.11.2.14.11.1.7.5.1 | TablehpicfFfBcastStormControlPortConfigTable | not-accessible | current | This table provides information about Broadcast Storm control configuration of all ports. |
| 1.3.6.1.4.1.11.2.14.11.1.7.5.1.1 | RowhpicfFfBcastStormControlPortConfigEntry | not-accessible | current | This object provides information about Broadcast Storm Control configuration of each port. |
| 1.3.6.1.4.1.11.2.14.11.1.7.5.1.1.1 | ColumnhpicfFfBcastStormControlPortIndex | not-accessible | current | The ifIndex value which uniquely identifies a row in the Interfaces Table. |
| 1.3.6.1.4.1.11.2.14.11.1.7.5.1.1.2 | ColumnhpicfFfBcastStormControlMode | read-write | current | The Broadcast Storm Control mode of a port. A value of disable (1) indicates that no rising threshold value is set for broadcast storm traffic on this port. A … |
| 1.3.6.1.4.1.11.2.14.11.1.7.5.1.1.3 | ColumnhpicfFfBcastStormControlRisingpercent | read-write | current | This is the rising threshold Level in percent of bandwidth of the port. hpicfFfBcastStormControlAction occurs when broadcast traffic reaches this level. |
| 1.3.6.1.4.1.11.2.14.11.1.7.5.1.1.4 | ColumnhpicfFfBcastStormControlRisingpps | read-write | current | This object indicates the rising threshold for Broadcast Storm Control. This value is in packets-per-second of received broadcast traffic. hpicfFfBcastStormCon… |
| 1.3.6.1.4.1.11.2.14.11.1.7.5.1.1.5 | ColumnhpicfFfBcastStormControlAction | read-write | current | This object defines the action taken by the switch when a broadcast storm occurs on a port. A value of none (1) indicates that no action is performed. A value … |
| 1.3.6.1.4.1.11.2.14.11.1.7.5.1.1.6 | ColumnhpicfFfBcastStormControlPortDisableTimer | read-write | current | This object specifies the time period for which the port remains in disabled state. A port is disabled when broadcast traffic reaches the threshold value set o… |
| 1.3.6.1.4.1.11.2.14.11.1.7.6 | NodehpicfFfLinkFlapControlPortConfig | |||
| 1.3.6.1.4.1.11.2.14.11.1.7.6.1 | TablehpicfFfLinkFlapControlPortConfigTable | not-accessible | current | This table provides information about Link Flapping control configuration of all ports. |
| 1.3.6.1.4.1.11.2.14.11.1.7.6.1.1 | RowhpicfFfLinkFlapControlPortConfigEntry | not-accessible | current | This object provides information about Link Flapping Control configuration of each port. |
| 1.3.6.1.4.1.11.2.14.11.1.7.6.1.1.1 | ColumnhpicfFfLinkFlapControlPortIndex | not-accessible | current | The ifIndex value which uniquely identifies a row in the Interfaces Table. |
| 1.3.6.1.4.1.11.2.14.11.1.7.6.1.1.2 | ColumnhpicfFfLinkFlapControlSensitivity | read-write | current | The Link Flapping Control sensitivity of a port. A value of low (1) indicates that the sensitivity of the link flap threshold is set to 10 link flaps per 10 se… |
| 1.3.6.1.4.1.11.2.14.11.1.7.6.1.1.3 | ColumnhpicfFfLinkFlapControlAction | read-write | current | This object defines the action taken by the switch when link flaps occurs on a port. A value of none (1) indicates that no action is performed. A value of warn… |
| 1.3.6.1.4.1.11.2.14.11.1.7.6.1.1.4 | ColumnhpicfFfLinkFlapControlPortDisableTimer | read-write | current | This object specifies the time period for which the port remains in disabled state. A port is disabled when the number of link flaps reaches the threshold rate… |
| 1.3.6.1.4.1.11.2.14.11.1.7.7 | NodehpicfFfMcastStormPortConfig | |||
| 1.3.6.1.4.1.11.2.14.11.1.7.7.1 | TablehpicfFfMcastStormPortConfigTable | not-accessible | current | This table provides information about Multicast Storm Control configuration of all ports. |
| 1.3.6.1.4.1.11.2.14.11.1.7.7.1.1 | RowhpicfFfMcastStormPortConfigEntry | not-accessible | current | This object provides information about Multicast Storm Control configuration of each port. |
| 1.3.6.1.4.1.11.2.14.11.1.7.7.1.1.1 | ColumnhpicfFfMcastStormPortIndex | not-accessible | current | The ifIndex value which uniquely identifies a row in the Interfaces Table. |
| 1.3.6.1.4.1.11.2.14.11.1.7.7.1.1.2 | ColumnhpicfFfMcastStormMode | read-write | current | The Mroadcast Storm Control mode of a port. A value of disable (1) indicates that no rising threshold value is set for multicast storm traffic on this port. A … |
| 1.3.6.1.4.1.11.2.14.11.1.7.7.1.1.3 | ColumnhpicfFfMcastStormRisingpercent | read-write | current | This is the rising threshold Level in percent of bandwidth of the port. hpicfFfMcastStormControlAction occurs when multicast traffic reaches this level. |
| 1.3.6.1.4.1.11.2.14.11.1.7.7.1.1.4 | ColumnhpicfFfMcastStormRisingpps | read-write | current | This object indicates the rising threshold for Multicast Storm Control. This value is in packets-per-second of received multicast traffic. hpicfFfMcastStormCon… |
| 1.3.6.1.4.1.11.2.14.11.1.7.7.1.1.5 | ColumnhpicfFfMcastStormAction | read-write | current | This object defines the action taken by the switch when a multicast storm occurs on a port. A value of none (1) indicates that no action is performed. A value … |
| 1.3.6.1.4.1.11.2.14.11.1.7.7.1.1.6 | ColumnhpicfFfMcastStormPortDisablTimer | read-write | current | This object specifies the time period for which the port remains in disabled state. A port is disabled when multicast traffic reaches the threshold value set o… |
| 1.3.6.1.4.1.11.2.14.12.1.0.5 | NotificationhpicfFaultFinderTrap | current | This notification is sent whenever the Fault Finder creates an entry in the hpicfFfLogTable. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| HpicfFaultAction | INTEGER { none(1), warn(2), warnAndDisable(3), warnAndSpeedReduce(4), warnAndSpeedReduceAndDisable(5) } | current | Objects of this type are used to indicate actions taken on detection of a fault. |
| HpicfFaultTolerance | Integer32 (0..255) | current | Objects of this type are used to scale internal fault thresholds between hard-coded minimum and maximum threshold values as follows: actual = min + ((max - min) * tol)/maxTol where: actual - actual threshold used by Fau… |
| HpicfFaultType | INTEGER { badDriver(1), badXcvr(2), badCable(3), tooLongCable(4), overBandwidth(5), bcastStorm(6), partition(7), misconfiguredSQE(8), polarityReversal(9), networkLoop(10), lossOfLink(11), portSecurityViolation(12), backupLinkTransition(13), meshingFault(14), fanFault(15), rpsFault(16), stuck10MbFault(17), lossOfStackMember(18), hotSwapReboot(19), duplexMismatchHDX(20), duplexMismatchFDX(21), flowcntlJumbosFault(22), portSelftestFailure(23), xcvrUnidentified(24), xcvrUnsupported(25), crfNotify(26), crfThrottled(27), crfBlocked(28), xcvrNotYetSupported(29), xcvrBRevOnly(30), xcvrNotSupportedOnPort(31), phyReadFailure(32), linkFlap(33), intel82566dmportprotect(34), xcvrExceedQty(35), xcvrClone(36), xcvrCloneReminder(37), bcastStormPerPort(38), linkFlapPerPort(39), rxNonStdPreamble(40), mcastStorm(41), mcastStormPerPort(42) } | current | An enumerated value which indicates a type of fault which is monitored by the agent. |
| HpicfUrlString | OCTET STRING (SIZE(0..255)) | current | This TC describes an object which holds a reference to a (remote) resource by using the Uniform Resource Locator (URL) notation as defined in RFC 1738. The allowed character set and the encoding rules for this textual c… |