HP-ICF-GENERIC-RPTR
132 objects
This MIB module contains object definitions that are common to all repeater devices in the HP Integrated Communication Facility product line.
Imported Objects
| HP-ICF-OID | hpicfGenericRepeater hpicfGenRptrTrapsPrefix hpicfObjectModules icfHub |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE |
| SNMPv2-TC | DisplayString MacAddress RowStatus TimeStamp |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11.2.14.2.10 | NodehubSecurity | |||
| 1.3.6.1.4.1.11.2.14.2.10.1 | TablehubSecurePortTable | not-accessible | current | Table containing security configuration for each port. |
| 1.3.6.1.4.1.11.2.14.2.10.1.1 | RowhubSecurePortEntry | not-accessible | current | An entry in the hubSecurePortTable, containing the security configuration for a single port. |
| 1.3.6.1.4.1.11.2.14.2.10.1.1.1 | ColumnhubSecPtGroupIndex | read-only | current | This object identifies the group containing the port for which this entry contains security configuration information. |
| 1.3.6.1.4.1.11.2.14.2.10.1.1.2 | ColumnhubSecPtPortIndex | read-only | current | This object identifies the port within the group for which this entry contains security configuration information. |
| 1.3.6.1.4.1.11.2.14.2.10.1.1.3 | ColumnhubSecPtSecurityAddress | read-write | current | The desired authorized MAC address for this port. This can be either a regular station address to configure a specific address, or it can be one of the followi… |
| 1.3.6.1.4.1.11.2.14.2.10.1.1.4 | ColumnhubSecPtAuthorizedAddress | read-only | current | The MAC address of the station authorized to be on this port. This address could either have been configured by specifying a regular station address for hubSec… |
| 1.3.6.1.4.1.11.2.14.2.10.1.1.5 | ColumnhubSecPtPreventEavesdrop | read-write | current | If enabled, unicast packets not addressed to the authorized address for this port will be scrambled. |
| 1.3.6.1.4.1.11.2.14.2.10.1.1.6 | ColumnhubSecPtAlarmEnable | read-write | current | If enabled, the agent will generate an intrusionTrap if a packet is received on this port with a source MAC address that is different from the hubSecPtAuthoriz… |
| 1.3.6.1.4.1.11.2.14.2.10.1.1.7 | ColumnhubSecPtIntrusionFlag | read-write | current | This flag indicates if an intrusion has occurred on this port. The Security LED on the hub will blink if any instance of this flag has the value intrusion. Set… |
| 1.3.6.1.4.1.11.2.14.2.10.2 | TablehubIntruderLogTable | not-accessible | current | This table contains a record of the twenty most recent port security violations. The first entry in the table is the oldest. |
| 1.3.6.1.4.1.11.2.14.2.10.2.1 | RowhubIntruderLogEntry | not-accessible | current | A row in the hubIntruderLogTable containing information about a single port security violation. |
| 1.3.6.1.4.1.11.2.14.2.10.2.1.1 | ColumnhubIntruderIndex | read-only | current | The index of this entry in the intruder log table. Index 1 will always contain the oldest entry. If the table is full when a new intrusion occurs, the new entr… |
| 1.3.6.1.4.1.11.2.14.2.10.2.1.2 | ColumnhubIntruderGroup | read-only | current | This object identifies the group containing the port on which this intrusion occurred. |
| 1.3.6.1.4.1.11.2.14.2.10.2.1.3 | ColumnhubIntruderPort | read-only | current | This object identifies the port within the group on which this intrusion occurred. A port number of zero indicates that this entry is unused and the values for… |
| 1.3.6.1.4.1.11.2.14.2.10.2.1.4 | ColumnhubIntruderAddress | read-only | current | This object contains the source MAC address of the intruder. |
| 1.3.6.1.4.1.11.2.14.2.10.2.1.5 | ColumnhubIntruderTime | read-only | current | The value of sysUpTime when the intrusion occurred. This will be zero if the agent has been reset since the intruder was detected, since sysUpTime could be mis… |
| 1.3.6.1.4.1.11.2.14.2.10.2.1.6 | ColumnhubIntruderType | read-only | current | This object identifies the type of violation that occured: address, training, or both. The hubIntruderTrainingViolation object will indicate additional informa… |
| 1.3.6.1.4.1.11.2.14.2.10.2.1.7 | ColumnhubIntruderTrainingViolation | read-only | current | This object indicates the type of training violation. Note that for 802.3 ports, this object will always be equal to 'noViolation'. This object will be equal t… |
| 1.3.6.1.4.1.11.2.14.2.10.3 | TablehpSecurePortTable | not-accessible | current | Table containing security configuration for each port, where security for multiple MAC addresses per port is desired (e.g., switch systems). |
| 1.3.6.1.4.1.11.2.14.2.10.3.1 | RowhpSecurePortEntry | not-accessible | current | An entry in the hpSecurePortTable, containing the security configuration for a single port. |
| 1.3.6.1.4.1.11.2.14.2.10.3.1.1 | ColumnhpSecPtGroupIndex | not-accessible | current | This object identifies the group containing the port for which this entry contains security configuration information. On repeater systems, this can be used to… |
| 1.3.6.1.4.1.11.2.14.2.10.3.1.2 | ColumnhpSecPtPortIndex | not-accessible | current | This object identifies the port within the group for which this entry contains security configuration information. On a switch system, this index corresponds t… |
| 1.3.6.1.4.1.11.2.14.2.10.3.1.3 | ColumnhpSecPtAddressLimit | read-write | deprecated | This object identifies the maximum number of MAC addresses learned on this port when the hpSecPtLearnMode is set to learnFirstN or learnFirstNConditionally. Ch… |
| 1.3.6.1.4.1.11.2.14.2.10.3.1.4 | ColumnhpSecPtLearnMode | read-write | current | This object identifies the learning mode of the port. The modes are as follows: LearnContinuous. The port can learn all new MAC addresses. When a new address i… |
| 1.3.6.1.4.1.11.2.14.2.10.3.1.5 | ColumnhpSecPtPreventEavesdrop | read-write | deprecated | If enabled on a switch, outbound unknown unicast packets will not be forwarded out this port. If enabled on a repeater, outbound unknown unicast packets for th… |
| 1.3.6.1.4.1.11.2.14.2.10.3.1.6 | ColumnhpSecPtAlarmEnable | read-write | current | This object identifies the action taken when an intrusion occurs. See hpSecPtLearnMode for what constitutes an intrusion. disable. No trap is sent and the port… |
| 1.3.6.1.4.1.11.2.14.2.10.3.1.7 | ColumnhpSecPtIntrusionFlag | read-write | current | This flag indicates if an intrusion has occured on this port. Security-related LED(s) on the device will blink if any instance of this flag has the value intru… |
| 1.3.6.1.4.1.11.2.14.2.10.3.1.8 | ColumnhpSecPtAddressLimit2 | read-write | current | This object identifies the maximum number of MAC addresses learned on this port when the hpSecPtLearnMode is set to learnFirstN or learnFirstNConditionally. Th… |
| 1.3.6.1.4.1.11.2.14.2.10.4 | TablehpSecureCfgAddrTable | not-accessible | current | Table containing multiple configured authorized addresses per port. Facilitates security for ports whose hpSecPtLearnMode is set to configureSpecific. |
| 1.3.6.1.4.1.11.2.14.2.10.4.1 | RowhpSecureCfgAddrEntry | not-accessible | current | An entry in the hpSecureCfgAddrTable, containing the configured authorized address for a single port. Entries are stored in nonvolatile memory when either the … |
| 1.3.6.1.4.1.11.2.14.2.10.4.1.1 | ColumnhpSecCfgAddrGroupIndex | not-accessible | current | This object identifies the group containing the port for which this entry contains the configured authorized address. On repeater systems, this can be used to … |
| 1.3.6.1.4.1.11.2.14.2.10.4.1.2 | ColumnhpSecCfgAddrPortIndex | not-accessible | current | This object identifies the port within the group for which this entry contains the configured authorized address. On a switch, this index corresponds to the if… |
| 1.3.6.1.4.1.11.2.14.2.10.4.1.3 | ColumnhpSecCfgAddress | not-accessible | current | A specific authorized MAC address for this port configured by a management station. |
| 1.3.6.1.4.1.11.2.14.2.10.4.1.4 | ColumnhpSecCfgStatus | read-create | current | The row status of a hpSecureCfgAddrEntry. |
| 1.3.6.1.4.1.11.2.14.2.10.5 | TablehpSecureAuthAddrTable | not-accessible | current | Table containing the authorized addresses for each port. An authorized address is an address learned while the hpSecPtLearnMode for the port is set to learnCon… |
| 1.3.6.1.4.1.11.2.14.2.10.5.1 | RowhpSecureAuthAddrEntry | not-accessible | current | An entry in the hpSecureAuthAddrTable, containing the authorized address for a single port. Entries are stored in nonvolatile memory except when the port's hpS… |
| 1.3.6.1.4.1.11.2.14.2.10.5.1.1 | ColumnhpSecAuthAddrGroupIndex | not-accessible | current | This object identifies the group containing the port for which this entry contains authorized address information. On repeater systems, this can be used to ide… |
| 1.3.6.1.4.1.11.2.14.2.10.5.1.2 | ColumnhpSecAuthAddrPortIndex | not-accessible | current | This object identifies the port within the group for which this entry contains authorized address information. On a switch, this index corresponds to ifIndex o… |
| 1.3.6.1.4.1.11.2.14.2.10.5.1.3 | ColumnhpSecAuthAddress | read-only | current | The MAC address of the station authorized to be on this port. See hpSecureAuthAddrTable for the definition of 'authorized address'. |
| 1.3.6.1.4.1.11.2.14.10.2.8 | IdentityhpicfGenRptrMib | This MIB module contains object definitions that are common to all repeater devices in the HP Integrated Communication Facility product line. | ||
| 1.3.6.1.4.1.11.2.14.10.2.8.1 | NodehpicfGenRptrConformance | |||
| 1.3.6.1.4.1.11.2.14.10.2.8.1.1 | NodehpicfGenRptrCompliances | |||
| 1.3.6.1.4.1.11.2.14.10.2.8.1.1.1 | CompliancehpicfHubSecurityCompliance | deprecated | ********* THIS COMPLIANCE IS DEPRECATED ********* The compliance statement for agents implementing per-port security in a single-repeater 802.3 repeater system. | |
| 1.3.6.1.4.1.11.2.14.10.2.8.1.1.2 | CompliancehpicfGenRptrBasicCompliance | read-only | deprecated | ********* THIS COMPLIANCE IS DEPRECATED ********* The compliance statement for agents implementing management for a single repeater. |
| 1.3.6.1.4.1.11.2.14.10.2.8.1.1.3 | CompliancehpicfGenRptrSecurityCompliance | read-only | deprecated | ********* THIS COMPLIANCE IS DEPRECATED ********* The compliance statement for AdvanceStack 100VG slaves implementing security. |
| 1.3.6.1.4.1.11.2.14.10.2.8.1.1.4 | CompliancehpicfGenRptrCompliance | read-only | deprecated | ********* THIS COMPLIANCE IS DEPRECATED ********* The compliance statement for HP managed repeater systems. |
| 1.3.6.1.4.1.11.2.14.10.2.8.1.1.5 | CompliancehpicfGenRptrCompliance2 | read-only | current | The compliance statement for HP managed repeater systems. |
| 1.3.6.1.4.1.11.2.14.10.2.8.1.1.6 | CompliancehpicfGenRptrCompliance3 | read-only | current | The compliance statement for HP managed repeater systems. |
| 1.3.6.1.4.1.11.2.14.10.2.8.1.1.7 | CompliancehpicfGenRptrMultiSecOnlyCompliance | deprecated | ********* THIS COMPLIANCE IS DEPRECATED ********* The compliance statement for non-repeater devices that implement per-port security with multiple authorized a… | |
| 1.3.6.1.4.1.11.2.14.10.2.8.1.1.8 | CompliancehpicfGenRptrMultiSecOnlyCompliance2 | deprecated | ********* THIS COMPLIANCE IS DEPRECATED ********* The updated compliance statement for non-repeater devices that implement per-port security with multiple auth… | |
| 1.3.6.1.4.1.11.2.14.10.2.8.1.1.9 | CompliancehpicfGenRptrMultiSecOnlyCompliance3 | current | The updated compliance statement for non-repeater devices that implement per-port security with multiple authorized address per port. | |
| 1.3.6.1.4.1.11.2.14.10.2.8.1.2 | NodehpicfGenRptrGroups | |||
| 1.3.6.1.4.1.11.2.14.10.2.8.1.2.1 | GrouphpicfHubSecurityGroup | deprecated | ********* THIS GROUP IS DEPRECATED ********* A collection of objects for managing per-port security violations for a managed 802.3 repeater system. | |
| 1.3.6.1.4.1.11.2.14.10.2.8.1.2.2 | GrouphpicfGenRptrBasicGroup | current | A collection of objects for basic configuration of a system containing repeaters. | |
| 1.3.6.1.4.1.11.2.14.10.2.8.1.2.3 | GrouphpicfGenRptrSecPtGroup | current | A collection of objects for managing per-port security in a managed repeater system. | |
| 1.3.6.1.4.1.11.2.14.10.2.8.1.2.4 | GrouphpicfGenRptrInfoGroup | current | A collection of objects providing information about logical repeaters in a system. | |
| 1.3.6.1.4.1.11.2.14.10.2.8.1.2.5 | GrouphpicfGenRptrBkpLinkGroup | current | A collection of objects for configuring backup links in a managed repeater system. | |
| 1.3.6.1.4.1.11.2.14.10.2.8.1.2.6 | GrouphpicfGenRptrPortMappingGroup | current | A collection of objects for mapping repeater segments and repeater ports to logical repeaters. | |
| 1.3.6.1.4.1.11.2.14.10.2.8.1.2.7 | GrouphpicfGenRptrLoadBalanceGroup | current | A collection of objects for managing segment load balancing on multisegment repeaters with internal switches. | |
| 1.3.6.1.4.1.11.2.14.10.2.8.1.2.8 | GrouphpicfGenRptrSwitchConfigGroup | current | A collection of Objects for configuring internal and external switches for switching between repeater segments in a repeater system. | |
| 1.3.6.1.4.1.11.2.14.10.2.8.1.2.9 | GrouphpicfGenRptrSecNotifyGroup | current | A collection of notifications used to indicate per-port security violations. | |
| 1.3.6.1.4.1.11.2.14.10.2.8.1.2.10 | GrouphpicfGenRptrBkpLinkNotifyGroup | current | A collection of notifications used to indicate state changes on a backup link. | |
| 1.3.6.1.4.1.11.2.14.10.2.8.1.2.11 | GrouphpicfSecPtGroup | deprecated | ********* THIS GROUP IS DEPRECATED ********* A collection of objects for managing per-port security in a managed repeater or switch system. | |
| 1.3.6.1.4.1.11.2.14.10.2.8.1.2.12 | GrouphpicfGenRptrBridgeGroup | current | A collection of objects for basic configuration of repeater system containing internal bridging. | |
| 1.3.6.1.4.1.11.2.14.10.2.8.1.2.13 | GrouphpicfSecPtGroup2 | deprecated | ********* THIS GROUP IS DEPRECATED ********* A collection of objects for managing per-port security in a managed repeater or switch system. | |
| 1.3.6.1.4.1.11.2.14.10.2.8.1.2.14 | GrouphpicfSecPtGroup3 | current | A collection of objects for managing per-port security in a managed repeater or switch system. | |
| 1.3.6.1.4.1.11.2.14.11.4.1 | NodehpGRpBasic | |||
| 1.3.6.1.4.1.11.2.14.11.4.1.1 | NodehpGRpBasicGlobal | |||
| 1.3.6.1.4.1.11.2.14.11.4.1.1.1 | ScalarhpGRpSelfHealEnable | read-write | current | This flag controls whether or not the device will send self healing packets. Self healing packets are normally sent once per second by the agent when no other … |
| 1.3.6.1.4.1.11.2.14.11.4.1.1.2 | TablehpGRpRepeaterTable | not-accessible | current | A table containing generic information about the current logical repeaters in this managed system. |
| 1.3.6.1.4.1.11.2.14.11.4.1.1.2.1 | RowhpGRpRepeaterEntry | not-accessible | current | An entry in the table, containing information about a single logical repeater. |
| 1.3.6.1.4.1.11.2.14.11.4.1.1.2.1.1 | ColumnhpGRpRepeaterIndex | not-accessible | current | This object uniquely identifies the logical repeater in the managed system for which this entry contains information. This object will have the same value as t… |
| 1.3.6.1.4.1.11.2.14.11.4.1.1.2.1.2 | ColumnhpGRpRepeaterIfIndex | read-only | current | The interface on the agent that is used to transmit and receive packets through this repeater. The ifEntry identified by this value is the same entry identifie… |
| 1.3.6.1.4.1.11.2.14.11.4.1.1.2.1.3 | ColumnhpGRpRepeaterName | read-write | current | A friendly name for this repeater. Management applications can use this to configure a user friendly name for this logical repeater. |
| 1.3.6.1.4.1.11.2.14.11.4.1.1.2.1.4 | ColumnhpGRpRepeaterVlanIndex | read-write | current | The virtual LAN that this repeater is on. Note that setting this object does not affect the operation of the repeater in any way. It is a 'notepad' for managem… |
| 1.3.6.1.4.1.11.2.14.11.4.2 | NodehpicfGRpBackupLinks | |||
| 1.3.6.1.4.1.11.2.14.11.4.2.1 | ScalarhpicfBackupLinkNextIndex | read-write | current | A currently unassigned value of hpicfBackupLinkIndex. The value 0 indicates that no unassigned values are available. In order to cause a non-zero value of this… |
| 1.3.6.1.4.1.11.2.14.11.4.2.2 | TablehpicfBackupLinkTable | not-accessible | current | A table of backup link configuration entries. For a given backup link, the agent will periodically send a test packet to the device at the specified address. I… |
| 1.3.6.1.4.1.11.2.14.11.4.2.2.1 | RowhpicfBackupLinkEntry | not-accessible | current | A row in the table, containing information about a single backup link. |
| 1.3.6.1.4.1.11.2.14.11.4.2.2.1.1 | ColumnhpicfBackupLinkIndex | not-accessible | current | The value of this object uniquely identifies this backup link. |
| 1.3.6.1.4.1.11.2.14.11.4.2.2.1.2 | ColumnhpicfBackupLinkPrimaryGroup | read-create | current | The group containing the primary port for this backup link. |
| 1.3.6.1.4.1.11.2.14.11.4.2.2.1.3 | ColumnhpicfBackupLinkPrimaryPort | read-create | current | The port number within the group of the primary port for this backup link. |
| 1.3.6.1.4.1.11.2.14.11.4.2.2.1.4 | ColumnhpicfBackupLinkBackupGroup | read-create | current | The group containing the backup port for this backup link. |
| 1.3.6.1.4.1.11.2.14.11.4.2.2.1.5 | ColumnhpicfBackupLinkBackupPort | read-create | current | The port number within the group of the backup port for this backup link. |
| 1.3.6.1.4.1.11.2.14.11.4.2.2.1.6 | ColumnhpicfBackupLinkAddress | read-create | current | The MAC address of the device to which periodic test packets are sent in order to determine if the primary link is operational. |
| 1.3.6.1.4.1.11.2.14.11.4.2.2.1.7 | ColumnhpicfBackupLinkTestTime | read-create | current | The frequency, in seconds, between sending periodic test packets. The test packet response timeout is fixed at 500ms. |
| 1.3.6.1.4.1.11.2.14.11.4.2.2.1.8 | ColumnhpicfBackupLinkConsecFailures | read-create | current | The number of consecutive test packet failures which will cause the agent to switch to the backup port (i.e., backup port turned on, primary port turned off). … |
| 1.3.6.1.4.1.11.2.14.11.4.2.2.1.9 | ColumnhpicfBackupLinkState | read-only | current | The current state of this backup link. One of the following values: notActive - backup link not running because this row has not yet been made active usingPrim… |
| 1.3.6.1.4.1.11.2.14.11.4.2.2.1.10 | ColumnhpicfBackupLinkFailEventIndex | read-create | current | The index of the eventEntry in the RMON MIB that will be triggered whenever the value of hpicfBackupLinkState changes from 'usingPrimary' to 'usingBackup'. The… |
| 1.3.6.1.4.1.11.2.14.11.4.2.2.1.11 | ColumnhpicfBackupLinkStatus | read-create | current | The status of this entry. This object may not be set to 'active' unless the corresponding instance of hpicfBackupLinkAddress has been set to a valid unicast ad… |
| 1.3.6.1.4.1.11.2.14.11.4.3 | NodehpGRpPortMapping | |||
| 1.3.6.1.4.1.11.2.14.11.4.3.1 | TablehpGRpPMSegmentTable | not-accessible | current | A table for configuring segment-to-repeater mapping for repeater segments in this managed system. |
| 1.3.6.1.4.1.11.2.14.11.4.3.1.1 | RowhpGRpPMSegmentEntry | not-accessible | current | An entry in the table, containing mapping information about a single repeater segment. |
| 1.3.6.1.4.1.11.2.14.11.4.3.1.1.1 | ColumnhpGRpPMSegmentIndex | not-accessible | current | The value of an instance of this object uniquely identifies a physical repeater segment in this managed system. The value of an instance of this object will be… |
| 1.3.6.1.4.1.11.2.14.11.4.3.1.1.3 | ColumnhpGRpPMCurrentRptrIndex | read-write | current | The index of the repeater that this segment is currently connected to. Changing this value has the effect of moving all ports on this segment to a different re… |
| 1.3.6.1.4.1.11.2.14.11.4.3.2 | TablehpGRpPMSegAllowedRptrTable | not-accessible | current | This table is used to inform a management application about which repeaters a physical segment is able to be connected to. There is one row in this table for e… |
| 1.3.6.1.4.1.11.2.14.11.4.3.2.1 | RowhpGRpPMSegAllowedRptrEntry | not-accessible | current | A row in the table, containing a single allowable segment-to-repeater connection. The presence of a row indicates that the segment identified by hpGRpPMSegment… |
| 1.3.6.1.4.1.11.2.14.11.4.3.2.1.1 | ColumnhpGRpPMSegAllowedRptrIndex | read-only | current | The repeater index that identifies a repeater that this segment is able to be connected to. |
| 1.3.6.1.4.1.11.2.14.11.4.3.3 | TablehpGRpPMPortTable | not-accessible | current | A table for configuring port-to-repeater mapping for repeater ports in this managed system. |
| 1.3.6.1.4.1.11.2.14.11.4.3.3.1 | RowhpGRpPMPortEntry | not-accessible | current | An entry in the table, containing mapping information about a single repeater port. |
| 1.3.6.1.4.1.11.2.14.11.4.3.3.1.1 | ColumnhpGRpPMPortGroupIndex | not-accessible | current | The group containing the port for which this entry contains mapping information. |
| 1.3.6.1.4.1.11.2.14.11.4.3.3.1.2 | ColumnhpGRpPMPortIndex | not-accessible | current | The port within the group for which this entry contains mapping information. |
| 1.3.6.1.4.1.11.2.14.11.4.3.3.1.3 | ColumnhpGRpPMPortEntPhysicalIndex | read-only | current | This object indicates which entry in the Entity MIB's entPhysicalTable represents this port. The entPhysicalEntry identified by this value is the same entry id… |
| 1.3.6.1.4.1.11.2.14.11.4.3.3.1.4 | ColumnhpGRpPMPortCurrentRptrIndex | read-write | current | The index of the repeater that this port is currently mapped to. Changing this value has the effect of moving this port to a different repeater. The hpGRpPMPor… |
| 1.3.6.1.4.1.11.2.14.11.4.3.4 | TablehpGRpPMPortAllowedRptrTable | not-accessible | current | This table is used to inform a management application about which repeaters a logical port is able to be mapped to. There is one row in this table for each all… |
| 1.3.6.1.4.1.11.2.14.11.4.3.4.1 | RowhpGRpPMPortAllowedRptrEntry | not-accessible | current | A row in the table, containing a single allowable port to repeater mapping. The presence of a row indicates that the port identified by hpGRpPMPortGroupIndex, … |
| 1.3.6.1.4.1.11.2.14.11.4.3.4.1.1 | ColumnhpGRpPMPortAllowedRptrIndex | read-only | current | The repeater index that identifies a repeater that this port is able to be mapped to. |
| 1.3.6.1.4.1.11.2.14.11.4.4 | NodehpGRpLoadBalancing | |||
| 1.3.6.1.4.1.11.2.14.11.4.4.1 | ScalarhpGRpPortMapAutoConfigEnable | read-write | current | If this object has the value 'enabled', when a switch is discovered in the stack, the repeater ports will be evenly distributed across the repeater segments if… |
| 1.3.6.1.4.1.11.2.14.11.4.4.2 | ScalarhpGRpLoadBalanceNow | read-write | current | Setting this object to 'balancing' will cause the agent to distribute ports in the stack across the repeater segments, attempting to balance the traffic load o… |
| 1.3.6.1.4.1.11.2.14.11.4.4.3 | ScalarhpGRpLastLoadBalanceTime | read-only | current | This object contains the value of sysUpTime for the last time the hpGRPLoadBalanceNow object was set to 'balancing'. If load balancing has not been performed s… |
| 1.3.6.1.4.1.11.2.14.11.4.5 | NodehpicfGRpSwitchConfig | |||
| 1.3.6.1.4.1.11.2.14.11.4.5.1 | TablehpicfGRpSwitchTable | not-accessible | current | A table of switches, both internal and external, connected to ports in this repeater system. Typically, internal switches are added by the agent and cannot be … |
| 1.3.6.1.4.1.11.2.14.11.4.5.1.1 | RowhpicfGRpSwitchEntry | not-accessible | current | An entry in the table, representing a single attached switch. |
| 1.3.6.1.4.1.11.2.14.11.4.5.1.1.1 | ColumnhpicfGRpSwitchIndex | not-accessible | current | An index used to uniquely identify this switch. |
| 1.3.6.1.4.1.11.2.14.11.4.5.1.1.2 | ColumnhpicfGRpSwitchType | read-only | current | This object indicates whether this switch is an internal switch card or a switch external to the repeater system. This object will always be equal to 'external… |
| 1.3.6.1.4.1.11.2.14.11.4.5.1.1.3 | ColumnhpicfGRpSwitchEntPhysicalIndex | read-only | current | For an internal switch, this object is the index in the entPhysicalTable for the internal switch card. For an external switch, the value of this object will be… |
| 1.3.6.1.4.1.11.2.14.11.4.5.1.1.4 | ColumnhpicfGRpSwitchLinkCount | read-create | current | The number of links from this switch's ports to repeater ports in this repeater system. For internal switches, this object cannot be modified by a network mana… |
| 1.3.6.1.4.1.11.2.14.11.4.5.1.1.5 | ColumnhpicfGRpSwitchStatus | read-create | current | The status of this hpicfGRpSwitchEntry. An entry may not exist in the active state unless the associated instance of the hpicfGRpSwitchLinkCount has been set t… |
| 1.3.6.1.4.1.11.2.14.11.4.5.2 | TablehpicfGRpSwitchLinkTable | not-accessible | current | A table of links to switch ports for both internal and external switches that are connected to repeater ports in this repeater system. |
| 1.3.6.1.4.1.11.2.14.11.4.5.2.1 | RowhpicfGRpSwitchLinkEntry | not-accessible | current | An entry in the table, representing a single link to a switch port. |
| 1.3.6.1.4.1.11.2.14.11.4.5.2.1.1 | ColumnhpicfGRpSwitchLinkIndex | not-accessible | current | An identifier that uniquely identifies this switch link among all of the links associated with this switch. The values of this object are numbered consecutivel… |
| 1.3.6.1.4.1.11.2.14.11.4.5.2.1.2 | ColumnhpicfGRpSwitchLinkRptrGroup | read-write | current | The group containing the repeater port to which this switch link is attached. For internal switches, this object may not be modified by a network management op… |
| 1.3.6.1.4.1.11.2.14.11.4.5.2.1.3 | ColumnhpicfGRpSwitchLinkRptrPort | read-write | current | The repeater port within the group to which this switch link is attached. For internal switches, this object may not be modified by a network management operat… |
| 1.3.6.1.4.1.11.2.14.11.4.5.2.1.4 | ColumnhpicfGRpSwitchLinkState | read-write | current | This object indicates whether this switch link is enabled ('active') or disabled ('redundant') due to one of the following: - There are more links to this swit… |
| 1.3.6.1.4.1.11.2.14.11.4.5.3 | ScalarhpicfGRpCurrentPrimarySwitch | read-only | current | The hpicfGRpSwitchIndex of the switch that is currently the primary switch for this stack. The automatic port-to-segment distribution feature will make decisio… |
| 1.3.6.1.4.1.11.2.14.11.4.5.4 | ScalarhpicfGRpDesiredPrimarySwitch | read-write | current | The hpicfGRpSwitchIndex of the switch that the network administrator wants to be the primary switch for this stack. If the value of this object is zero, the ag… |
| 1.3.6.1.4.1.11.2.14.11.4.6 | NodehpicfGRpBridge | |||
| 1.3.6.1.4.1.11.2.14.11.4.6.1 | ScalarhpGRpBridgeAdminStatus | read-write | current | |
| 1.3.6.1.4.1.11.2.14.12.4.0.1 | NotificationhpicfIntrusionTrap | current | The hpicfIntrusionTrap signifies that a port security violation has been detected on a port which has the hubSecPtAlarmEnable flag set to 'enabled'. or hpSecPt… | |
| 1.3.6.1.4.1.11.2.14.12.4.0.2 | NotificationhpicfBackupLinkTrap | current | The hpicfBackupLinkTrap signifies that the primary link for a backup link configuration has failed, and the agent has switched over to using the backup link. T… |