HP-ICF-MAD-MIB
20 objects
The MIB module is for Multi Active Detection Technology (MAD).
Imported Objects
| HP-ICF-OID | hpSwitch |
| IF-MIB | InterfaceIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Integer32 MODULE-IDENTITY OBJECT-TYPE |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.5.1.95 | IdentityhpicfMadMIB | The MIB module is for Multi Active Detection Technology (MAD). | ||
| 1.3.6.1.4.1.11.2.14.11.5.1.95.0 | NodehpicfMadNotifications | |||
| 1.3.6.1.4.1.11.2.14.11.5.1.95.1 | NodehpicfMadObjects | |||
| 1.3.6.1.4.1.11.2.14.11.5.1.95.1.1 | NodehpicfMadLacpAggObjects | |||
| 1.3.6.1.4.1.11.2.14.11.5.1.95.1.1.1 | TablehpicfMadLacpAggTable | not-accessible | current | Information describing the MAD configuration on LACP trunks. |
| 1.3.6.1.4.1.11.2.14.11.5.1.95.1.1.1.1 | RowhpicfMadLacpAggEntry | not-accessible | current | Information describing the MAD configuration on LACP trunks. |
| 1.3.6.1.4.1.11.2.14.11.5.1.95.1.1.1.1.1 | ColumnhpicfMadLacpAggTrunkId | not-accessible | current | A LACP trunk ID to uniquely identify each entry in the table. |
| 1.3.6.1.4.1.11.2.14.11.5.1.95.1.1.1.1.2 | ColumnhpicfMadPassthroughLacpAggAdminStatus | read-write | current | The desired administrative state of MAD passthrough on LACP trunk interface.By default lacp mad passthrough will be enabled on all LACP trunks. |
| 1.3.6.1.4.1.11.2.14.11.5.1.95.1.1.2 | TablehpicfMadLacpAggPortStatsTable | not-accessible | current | A table that contains MAD( Multi Active Detection) information of every port that is associated with LACP trunk. A row appears in this table for each physical … |
| 1.3.6.1.4.1.11.2.14.11.5.1.95.1.1.2.1 | RowhpicfMadLacpAggPortStatsEntry | not-accessible | current | A list of Link Aggregation Control Protocol statistics for each port on this device. |
| 1.3.6.1.4.1.11.2.14.11.5.1.95.1.1.2.1.1 | ColumnhpicfMadLacpAggPortIndex | not-accessible | current | Physical port to uniquely identify an entry. |
| 1.3.6.1.4.1.11.2.14.11.5.1.95.1.1.2.1.2 | ColumnhpicfMadPassthroughLacpAggPDUsRx | read-only | current | The number of valid LACP PDUs with MAD TLV received on this aggregation port. This value is read-only. |
| 1.3.6.1.4.1.11.2.14.11.5.1.95.1.1.2.1.3 | ColumnhpicfMadPassthroughLacpAggPDUsTx | read-only | current | The number of LACP PDUs with MAD TLV transmitted on this aggregation port. This value is read-only. |
| 1.3.6.1.4.1.11.2.14.11.5.1.95.1.1.2.1.4 | ColumnhpicfMadPassthroughLacpAggPDUsDropped | read-only | current | The number of LACPDUs with MAD TLV dropped on this aggregation port. This value is read-only. |
| 1.3.6.1.4.1.11.2.14.11.5.1.95.2 | NodehpicfMadConformance | |||
| 1.3.6.1.4.1.11.2.14.11.5.1.95.2.1 | NodehpicfMadLacpAggGoups | |||
| 1.3.6.1.4.1.11.2.14.11.5.1.95.2.1.1 | GrouphpicfMadLacpAggConfigGroup | current | These objects are used for managing LACP MAD configuration parameters. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.95.2.1.2 | GrouphpicfMadLacpAggStatisticsGroup | current | These objects are used for providing information about each port. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.95.2.2 | NodehpicfMadLacpAggCompliances | |||
| 1.3.6.1.4.1.11.2.14.11.5.1.95.2.2.1 | CompliancehpicfMadLacpAggCompliance1 | current | The compliance statement |