HP-ICF-PIM
70 objects
This MIB module contains HP proprietary extensions to the standard PIM MIB (RFC 2934).
Imported Objects
| HP-ICF-OID | hpSwitch |
| INET-ADDRESS-MIB | InetAddress InetAddressPrefixLength InetAddressType |
| PIM-MIB | pimComponentEntry pimInterfaceEntry pimRPSetComponent |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks Unsigned32 |
| SNMPv2-TC | RowStatus TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.5.1.20 | IdentityhpicfPimMIB | This MIB module contains HP proprietary extensions to the standard PIM MIB (RFC 2934). | ||
| 1.3.6.1.4.1.11.2.14.11.5.1.20.1 | NodehpicfPimObjects | |||
| 1.3.6.1.4.1.11.2.14.11.5.1.20.1.0 | NodehpicfPimTraps | |||
| 1.3.6.1.4.1.11.2.14.11.5.1.20.1.0.1 | NotificationhpicfPimHardMRTFull | current | This notification signifies that the MRT table is full and the error has been originated by hardware. This trap should be generated whenever a multicast flow o… | |
| 1.3.6.1.4.1.11.2.14.11.5.1.20.1.0.2 | NotificationhpicfPimSoftMRTFull | current | This notification signifies that the MRT table is full and the error has been originated by software. This trap should be generated whenever a multicast flow o… | |
| 1.3.6.1.4.1.11.2.14.11.5.1.20.1.1 | NodehpicfPim | |||
| 1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.1 | ScalarhpicfPimAdminStatus | read-write | current | The operational status of the PIM routing protocol on this router. Default is disabled. |
| 1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.2 | ScalarhpicfPimStateRefreshInterval | read-write | current | The interval between successive State Refresh messages originated by this router. Default is 60 seconds. |
| 1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.3 | ScalarhpicfPimSPTThreshold | read-write | current | Specifies a threshold for switching to the Shortest Path Tree (SPT) on this router. If the object has the special value of -1, the Shared Tree rooted to the Re… |
| 1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.4 | ScalarhpicfPimTrapControl | read-write | current | Indicates whether the PIM-enabled router will generate SNMP traps for PIM events. The set bit means 'enabled'. - neighborLoss(0) This bit controls whether the … |
| 1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.5 | TablehpicfPimStaticRPSetTable | not-accessible | current | The (conceptual) table containing statically configured Rendezvous Points (RPs) for IP multicast group mappings. This information is being used in the PIM Spar… |
| 1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.5.1 | RowhpicfPimStaticRPSetEntry | not-accessible | current | An entry (row) in the hpicfPimStaticRPSetTable. NOTE: the pimRPSetComponent is an index that uniquely identifies the component. Each protocol instance connecte… |
| 1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.5.1.1 | ColumnhpicfPimStaticRPSetGroupAddress | not-accessible | current | The IP multicast group address which, when combined with hpicfPimStaticRPSetGroupMask, gives the group prefix for which this entry contains information about t… |
| 1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.5.1.2 | ColumnhpicfPimStaticRPSetGroupMask | not-accessible | current | The multicast group address mask which, when combined with hpicfPimStaticRPSetGroupAddress, gives the group prefix for which this entry contains information ab… |
| 1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.5.1.3 | ColumnhpicfPimStaticRPSetAddress | not-accessible | current | The IP address of statically configured RP for the given IP multicast group(s). |
| 1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.5.1.4 | ColumnhpicfPimStaticRPSetOverride | read-create | current | If true, indicates that the router should ignore the information learned by a BSR if there is a conflict between the information this static entry contains and… |
| 1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.5.1.5 | ColumnhpicfPimStaticRPSetRowStatus | read-create | current | The status of this row, by which new entries may be created, or old entries deleted from this table. |
| 1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.6 | TablehpicfPimIfTable | not-accessible | current | HP extensions to the pimInterfaceTable. |
| 1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.6.1 | RowhpicfPimIfEntry | not-accessible | current | HP extensions for an entry in the pimInterfaceTable. |
| 1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.6.1.1 | ColumnhpicfPimIfAddress | read-create | current | This is copy of pimInterfaceAddress with read-create access. PIM uses this source address to send its protocol packets out on this interface. This address can … |
| 1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.6.1.2 | ColumnhpicfPimIfTrigHelloInterval | read-create | current | The maximum time before a triggered PIM Hello message is transmitted on this interface. Default is 5 seconds. |
| 1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.6.1.3 | ColumnhpicfPimIfHelloHoldtime | read-create | current | The value set in the Holdtime field of Hello messages transmitted on this interface. This should be 3.5 times the value of pimInterfaceHelloInterval. Default i… |
| 1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.6.1.4 | ColumnhpicfPimIfLanPruneDelay | read-create | current | Turns the LAN Prune Delay options ON and OFF, on this interface. Default is true. |
| 1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.6.1.5 | ColumnhpicfPimIfPropagationDelay | read-create | current | The value inserted into the LAN Prune Delay field of a LAN Prune Delay option on this interface. Default is 500 milliseconds. |
| 1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.6.1.6 | ColumnhpicfPimIfOverrideInterval | read-create | current | The value inserted into the Override Interval field of a LAN Prune Delay option on this interface. Default is 2500 milliseconds. |
| 1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.6.1.7 | ColumnhpicfPimIfGenerationID | read-create | current | Turns the Generation ID option ON and OFF, on this interface. Default is false. |
| 1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.6.1.8 | ColumnhpicfPimIfJoinPruneHoldtime | read-create | current | The value inserted into the Holdtime field of a Join/ Prune message sent on this interface. The value should be 3.5 times pimInterfaceJoinPruneInterval. Defaul… |
| 1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.6.1.9 | ColumnhpicfPimIfGraftRetryInterval | read-create | current | The interval a PIM router waits for a Graft Ack before re-sending a Graft on this interface. Default is 3 seconds. |
| 1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.6.1.10 | ColumnhpicfPimIfMaxGraftRetries | read-create | current | The maximum number of times this router will re-send a Graft on this interface. Default is 2. |
| 1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.6.1.11 | ColumnhpicfPimIfSRTTLThreshold | read-create | current | The Time To Live in a PIM-DM State Refresh message at which it is not forwarded on this interface. Default is 0. |
| 1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.6.1.12 | ColumnhpicfPimIfLanDelayEnabled | read-only | current | Evaluates to TRUE if all routers on this interface are using the LAN Prune Delay Option. |
| 1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.6.1.13 | ColumnhpicfPimIfSRCapable | read-only | current | Evaluates to TRUE if all routers on this interface are using the State Refresh Capable Option. |
| 1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.6.1.14 | ColumnhpicfPimIfDRPriority | read-create | current | The Designated Router Priority inserted into the DR priority option on this interface. Default is 1. |
| 1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.6.1.15 | ColumnhpicfPimIfNBRTimeout | read-create | current | Time interval after which the router will consider a neighbor to not be present, if no PIM Hello messages arrived on the interface. Default is 180 seconds. |
| 1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.7 | TablehpicfPimComponentTable | not-accessible | current | HP extensions to the pimComponentTable - the (conceptual) table containing objects specific to a PIM domain. One row exists for each domain to which the router… |
| 1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.7.1 | RowhpicfPimComponentEntry | not-accessible | current | HP extensions for an entry in the pimComponentTable. |
| 1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.7.1.1 | ColumnhpicfPimComponentCBSRAdminStatus | read-create | current | This objects specifies whether or not the router configured to be a Candidate BSR for the local PIM region. Default is disabled. |
| 1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.7.1.2 | ColumnhpicfPimComponentCBSRAddress | read-create | current | The IP address the Candidate BSR router will advertise for the local PIM region. |
| 1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.7.1.3 | ColumnhpicfPimComponentCBSRPriority | read-create | current | The priority for Candidate BSR router. In BSR election process the candidate BSR with the highest (numerically bigger) priority becomes the BSR. If the priorit… |
| 1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.7.1.4 | ColumnhpicfPimComponentCBSRHashMaskLength | read-create | current | Specifies the length (in bits) of a multicast group address to use when mapping a group to one of the candidate RPs from the RP-Set whose group-prefix includes… |
| 1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.7.1.5 | ColumnhpicfPimComponentCBSRMessageInterval | read-create | current | If this router is the elected BSR, then this is the interval for sending (multicast out) periodic Bootstrap (RP-Set) messages on all PIM SM interfaces. Default… |
| 1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.7.1.6 | ColumnhpicfPimComponentCRPPriority | read-create | current | The priority for the Candidate RP for the local PIM domain. Determines which Candidate RPs get selected by the BSR to be in the RP Set. The smaller value means… |
| 1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.7.1.7 | ColumnhpicfPimComponentCRPAdvInterval | read-only | current | The interval at which the Candidate RP transmits (unicast to the elected BSR) advertise messages in the local PIM domain. |
| 1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.7.1.8 | ColumnhpicfPimComponentBSRPriority | read-only | current | The priority of the Bootstrap Router (BSR) elected for the local PIM region. |
| 1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.7.1.9 | ColumnhpicfPimComponentBSRHashMaskLength | read-only | current | The hash mask length of the elected Bootstrap Router (BSR). |
| 1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.7.1.10 | ColumnhpicfPimComponentBSRUpTime | read-only | current | Length of time that the elected Bootstrap Router (BSR) has been up. |
| 1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.7.1.11 | ColumnhpicfPimComponentBSRNextMessage | read-only | current | Time in which the next bootstrap message is due from the elected Bootstrap Router (BSR). |
| 1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.8 | ScalarhpicfPimRemoveConfig | read-write | current | PIM is halted. This objects clears all existing PIM configuration, intializes the pim config to the default state. SnmpGet on this will always return false. An… |
| 1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.9 | TablehpicfPimStaticRpfTable | not-accessible | current | The (conceptual) table containing statically configured reverse path forwarding (RPF) source address to interface mappings. This information is currently used … |
| 1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.9.1 | RowhpicfPimStaticRpfEntry | not-accessible | current | A row in the hpicfPimStaticRpfTable. |
| 1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.9.1.1 | ColumnhpicfPimStaticRpfSourceAddressType | not-accessible | current | The IP address type of the statically configured multicast source. |
| 1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.9.1.2 | ColumnhpicfPimStaticRpfSourceAddress | not-accessible | current | The IP address of the statically configured multicast source. |
| 1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.9.1.3 | ColumnhpicfPimStaticRpfSourcePrefixLength | not-accessible | current | The prefix length of the statically configured multicast source. |
| 1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.9.1.4 | ColumnhpicfPimStaticRpfAddressType | not-accessible | current | The type of RPF address for this route. The value of this object must be equal to a value appropriate for the corresponding instance of the hpicfPimStaticRpfSo… |
| 1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.9.1.5 | ColumnhpicfPimStaticRpfAddress | not-accessible | current | The IP address of the interface to use for RPF checks. |
| 1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.9.1.6 | ColumnhpicfPimStaticRpfRowStatus | read-create | current | The status of this row, by which new entries may be created, or old entries deleted from this table. |
| 1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.9.1.7 | ColumnhpicfPimStaticRpfOverrideState | read-only | current | The state of this RPF override entry. |
| 1.3.6.1.4.1.11.2.14.11.5.1.20.2 | NodehpicfPimConformance | |||
| 1.3.6.1.4.1.11.2.14.11.5.1.20.2.1 | NodehpicfPimGroups | |||
| 1.3.6.1.4.1.11.2.14.11.5.1.20.2.1.1 | GrouphpicfPimNotificationGroup | current | A collection of notifications that extends notifications defined in RFC 2934 - used for signaling important PIM events. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.20.2.1.2 | GrouphpicfPimBaseGroup | current | A collection of objects to support basic PIM configuration information on HP routers. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.20.2.1.3 | GrouphpicfPimStaticRPSetMappingGroup | current | A collection of objects to support management of static Rendezvous Point (RP) to IP multicast group mappings. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.20.2.1.4 | GrouphpicfPimSparseIfGroup | current | A collection of objects that extends objects defined in pimInterfaceTable and used to support management of interfaces operating in PIM Sparse Mode. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.20.2.1.5 | GrouphpicfPimDenseIfGroup | current | A collection of objects that extends objects defined in pimInterfaceTable and used to support management of interfaces operating in PIM Dense Mode. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.20.2.1.6 | GrouphpicfPimComponentGroup | current | A collection of objects that extends objects defined in pimComponentTable (RFC 2934). | |
| 1.3.6.1.4.1.11.2.14.11.5.1.20.2.1.7 | GrouphpicfPimStaticRpfGroup | current | A collection of objects defined in hpicfPimStaticRpfTable. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.20.2.2 | NodehpicfPimCompliances | |||
| 1.3.6.1.4.1.11.2.14.11.5.1.20.2.2.1 | CompliancehpicfPimSparseMIBCompliance | current | The compliance statement for HP routers running PIM Sparse Mode and implementing the HP-ICF-PIM MIB. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.20.2.2.2 | CompliancehpicfPimDenseMIBCompliance | current | The compliance statement for HP routers running PIM Dense Mode and implementing the HP-ICF-PIM MIB. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.20.2.2.3 | CompliancehpicfPimNotificationCompliance | current | The collection of notifications that extends notifications defined in RFC 2934 - used for signalling important PIM events. |