MIB Viewer

HP-ICF-RIPNG-MIB

46 objects
This is a HP proprietary MIB module to describe the RIPng protocol.
Imported Objects
HP-ICF-OIDhpSwitch
IF-MIBInterfaceIndex
INET-ADDRESS-MIBInetAddress InetAddressType
SNMPv2-CONFMODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP
SNMPv2-SMICounter32 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32
SNMPv2-TCRowStatus TruthValue
OIDNameAccessStatusDescription
1.3.6.1.4.1.11.2.14.11.5.1.113IdentityhpicfRipngThis is a HP proprietary MIB module to describe the RIPng protocol.
1.3.6.1.4.1.11.2.14.11.5.1.113.0NodehpicfRipngNotifications
1.3.6.1.4.1.11.2.14.11.5.1.113.0.1NotificationhpicfRipngIfStateChangecurrentA hpicfRipngIfStateChange notification signifies that there has been a change in the state of a RIPng interface.
1.3.6.1.4.1.11.2.14.11.5.1.113.0.2NotificationhpicfRipngIfConfigErrorcurrentA hpicfRipngIfConfigError notification signifies that a packet has been received on an interface from a router whose configuration parameters conflict with thi…
1.3.6.1.4.1.11.2.14.11.5.1.113.0.3NotificationhpicfRipngIfRxBadPacketcurrentA hpicfRipngIfRxBadPacket notification signifies that a RIPng packet that cannot be parsed has been received on this interface.
1.3.6.1.4.1.11.2.14.11.5.1.113.1NodehpicfRipngObjects
1.3.6.1.4.1.11.2.14.11.5.1.113.1.1NodehpicfRipngBaseScalars
1.3.6.1.4.1.11.2.14.11.5.1.113.1.1.1ScalarhpicfRipngGlobalRouteChangesread-onlycurrentThe number of changes to the RIPng routing table, excluding the age refresh.
1.3.6.1.4.1.11.2.14.11.5.1.113.1.1.2ScalarhpicfRipngGlobalQueriesread-onlycurrentThe number of responses received from other systems that are sent to the RIPng queries.
1.3.6.1.4.1.11.2.14.11.5.1.113.1.1.3ScalarhpicfRipngAdminStatusread-writecurrentThe admin status of the RIPng routing protocol.
1.3.6.1.4.1.11.2.14.11.5.1.113.1.1.4ScalarhpicfRipngDefaultMetricread-writecurrentThe default metric value for the routes that are redistributed by RIPng.
1.3.6.1.4.1.11.2.14.11.5.1.113.1.1.5ScalarhpicfRipngDistanceread-writecurrentThe administrative distance to associate with routes learned by RIPng. Routes with distances lower than the other peers in the network are preferred.
1.3.6.1.4.1.11.2.14.11.5.1.113.1.1.6ScalarhpicfRipngUpdateTimeread-writecurrentThis timer defines the interval between RIPng update messages.
1.3.6.1.4.1.11.2.14.11.5.1.113.1.1.7ScalarhpicfRipngTimeoutTimeread-writecurrentThis timer defines the route aging time. If no update message related to that route is received within this period, the metric of this route is set to 16 in th…
1.3.6.1.4.1.11.2.14.11.5.1.113.1.1.8ScalarhpicfRipngGarbageCollectTimeread-writecurrentThe garbage-collect timer defines the time interval when the metric of a route is 16 to the time when it is deleted from the routing table.
1.3.6.1.4.1.11.2.14.11.5.1.113.1.1.9ScalarhpicfRipngNotificationEnableread-writecurrentA four-octet string serving as a bit map for the trap events defined by the RIPng traps. This object is used to enable or disable specific RIPng traps where a …
1.3.6.1.4.1.11.2.14.11.5.1.113.1.2TablehpicfRipngIfConfTablenot-accessiblecurrentA list of the interfaces that require separate configuration in RIPng.
1.3.6.1.4.1.11.2.14.11.5.1.113.1.2.1RowhpicfRipngIfConfEntrynot-accessiblecurrentA single routing domain in a single subnet.
1.3.6.1.4.1.11.2.14.11.5.1.113.1.2.1.1ColumnhpicfRipngIfConfIndexnot-accessiblecurrentThe interface index of this RIPng interface. It corresponds to the interface index of the IPv6 interface on which RIPng is configured.
1.3.6.1.4.1.11.2.14.11.5.1.113.1.2.1.2ColumnhpicfRipngIfConfInstIdnot-accessiblecurrentThis will allow multiple instances of RIPng to run on the same device. Currently, only one instance is supported.
1.3.6.1.4.1.11.2.14.11.5.1.113.1.2.1.3ColumnhpicfRipngIfConfMetricread-createcurrentThe RIPng metric for this interface.
1.3.6.1.4.1.11.2.14.11.5.1.113.1.2.1.4ColumnhpicfRipngIfConfStatusread-createcurrentThe row status variable for the hpicfRipngIfConf table.
1.3.6.1.4.1.11.2.14.11.5.1.113.1.2.1.5ColumnhpicfRipngIfConfSrcAddressTyperead-onlycurrentThe address type for hpicfRipngIfConfSrcAddress. Only IPv6 addresses without a zone index value are accepted.
1.3.6.1.4.1.11.2.14.11.5.1.113.1.2.1.6ColumnhpicfRipngIfConfSrcAddressread-onlycurrentThe link-local IPv6 address that this system will use as a source address on this interface.
1.3.6.1.4.1.11.2.14.11.5.1.113.1.2.1.7ColumnhpicfRipngIfConfDoPoisonReverseread-createcurrentA flag indicating whether the router should perform poison reverse on this interface.
1.3.6.1.4.1.11.2.14.11.5.1.113.1.3TablehpicfRipngPeerTablenot-accessiblecurrentA list of RIPng peers.
1.3.6.1.4.1.11.2.14.11.5.1.113.1.3.1RowhpicfRipngPeerEntrynot-accessiblecurrentInformation regarding a single routing peer.
1.3.6.1.4.1.11.2.14.11.5.1.113.1.3.1.1ColumnhpicfRipngPeerAddressTypenot-accessiblecurrentThe address type for hpicfRipngPeerAddress. Only IPv6 addresses without a zone index are expected.
1.3.6.1.4.1.11.2.14.11.5.1.113.1.3.1.2ColumnhpicfRipngPeerAddressnot-accessiblecurrentThe IPv6 address that the peer is using as its source address. On an unnumbered link, this IPv6 address might not be a member of any subnet on the system.
1.3.6.1.4.1.11.2.14.11.5.1.113.1.3.1.3ColumnhpicfRipngPeerLastUpdateread-onlycurrentThe value of sysUpTime when the most recent RIPng update was received from this peer.
1.3.6.1.4.1.11.2.14.11.5.1.113.1.3.1.4ColumnhpicfRipngPeerRcvBadPacketsread-onlycurrentThe number of RIPng invalid response packets that are received from this peer.
1.3.6.1.4.1.11.2.14.11.5.1.113.1.4NodehpicfRipngNotificationEntry
1.3.6.1.4.1.11.2.14.11.5.1.113.1.4.1ScalarhpicfRipngConfigErrorTypeaccessible-for-notifycurrentPotential types of configuration conflicts. Used by hpicfRipngConfigError notifications.
1.3.6.1.4.1.11.2.14.11.5.1.113.1.4.2ScalarhpicfRipngPacketTypeaccessible-for-notifycurrentRIPng packet types.
1.3.6.1.4.1.11.2.14.11.5.1.113.1.4.3ScalarhpicfRipngPacketSrcTypeaccessible-for-notifycurrentThe address type for hpicfRipngPacketSrc.
1.3.6.1.4.1.11.2.14.11.5.1.113.1.4.4ScalarhpicfRipngPacketSrcaccessible-for-notifycurrentThe IPv6 address of an inbound packet that cannot be identified by a peer instance. Only IPv6 addresses without a zone index are expected.
1.3.6.1.4.1.11.2.14.11.5.1.113.1.4.5ScalarhpicfRipngIfStateaccessible-for-notifycurrentRIPng interface state types.
1.3.6.1.4.1.11.2.14.11.5.1.113.2NodehpicfRipngConformance
1.3.6.1.4.1.11.2.14.11.5.1.113.2.1NodehpicfRipngCompliances
1.3.6.1.4.1.11.2.14.11.5.1.113.2.1.1CompliancehpicfRipngCompliancecurrentThe compliance statement for HP routing switches that support RIPng.
1.3.6.1.4.1.11.2.14.11.5.1.113.2.2NodehpicfRipngGroups
1.3.6.1.4.1.11.2.14.11.5.1.113.2.2.1GrouphpicfRipngBaseScalarsGroupcurrentThis group lists the basic scalars that are required for the RIPng configuration.
1.3.6.1.4.1.11.2.14.11.5.1.113.2.2.2GrouphpicfRipngIfConfGroupcurrentThis group lists the interface configuration of RIPng systems.
1.3.6.1.4.1.11.2.14.11.5.1.113.2.2.3GrouphpicfRipngPeerGroupcurrentA collection of objects that lists peer information.
1.3.6.1.4.1.11.2.14.11.5.1.113.2.2.4GrouphpicfRipngNotificationObjectGroupcurrentA collection of objects that are used to record RIPng notification parameters.
1.3.6.1.4.1.11.2.14.11.5.1.113.2.2.5GrouphpicfRipngNotificationGroupcurrentA collection of objects that lists RIPng notifications.