HP-ICF-SNMP-MIB
34 objects
This MIB module contains HP proprietary objects for managing SNMP entity.
Imported Objects
| HP-ICF-OID | hpSwitch |
| IF-MIB | InterfaceIndexOrZero |
| INET-ADDRESS-MIB | InetAddress InetAddressType |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.5.1.38 | IdentityhpicfSnmpMIB | This MIB module contains HP proprietary objects for managing SNMP entity. | ||
| 1.3.6.1.4.1.11.2.14.11.5.1.38.0 | NodehpicfSnmpNotification | |||
| 1.3.6.1.4.1.11.2.14.11.5.1.38.0.1 | NotificationhpicfSnmpAuthFail | current | The switch sends this notification when an SNMP SET command fails at the authorization check stage. This notification applies to SETs within the hpicf tree tha… | |
| 1.3.6.1.4.1.11.2.14.11.5.1.38.1 | NodehpicfSnmpObjects | |||
| 1.3.6.1.4.1.11.2.14.11.5.1.38.1.1 | NodehpicfSnmpConfig | |||
| 1.3.6.1.4.1.11.2.14.11.5.1.38.1.1.1 | NodehpicfSnmpGlobalCfg | |||
| 1.3.6.1.4.1.11.2.14.11.5.1.38.1.1.1.1 | TablehpicfSnmpResponseSourceAddrPolicyTable | not-accessible | current | A table of entries used to configure the policy for selecting source address while sending SNMP response. When this entry is configured, the source address fie… |
| 1.3.6.1.4.1.11.2.14.11.5.1.38.1.1.1.1.1 | RowhpicfSnmpResponseSourceAddrPolicyEntry | not-accessible | current | An entry in the table, containing information about a single source address. This table allows only 2 values that can be used as index to this table. These are… |
| 1.3.6.1.4.1.11.2.14.11.5.1.38.1.1.1.1.1.1 | ColumnhpicfSnmpResponseSourceAddressType | accessible-for-notify | current | We allow only 2 values for this object as an index for hpicfSnmpResponseSourceAddrPolicyEntry - 1) hpicfSnmpResponseSourceAddressType = ipv4 Where user wants t… |
| 1.3.6.1.4.1.11.2.14.11.5.1.38.1.1.1.1.1.2 | ColumnhpicfSnmpResponseSourceAddrPolicy | read-create | current | This specifies the policy for selecting the source address for outgoing SNMP responses. a) rfc1517 This is the default behavior if no other policy is configure… |
| 1.3.6.1.4.1.11.2.14.11.5.1.38.1.1.1.1.1.3 | ColumnhpicfSnmpResponseSourceAddress | read-create | current | This object is used to set the IP address which will be used as source IP while sending the SNMP response. This object should be used in conjunction with the h… |
| 1.3.6.1.4.1.11.2.14.11.5.1.38.1.1.1.1.1.4 | ColumnhpicfSnmpResponseSourceAddrIfIndex | read-create | current | This object is used to set the interface whose IP address will be used as source IP while sending the SNMP response. This object should be used in conjunction … |
| 1.3.6.1.4.1.11.2.14.11.5.1.38.1.1.1.2 | TablehpicfSnmpTrapSourceAddrTable | not-accessible | current | A table of entries used to configure the source address used while generating SNMP Traps. When this entry is configured, the source address field in the IP PKT… |
| 1.3.6.1.4.1.11.2.14.11.5.1.38.1.1.1.2.1 | RowhpicfSnmpTrapSourceAddrEntry | not-accessible | current | An entry in the table, containing information about a single source address. This table allows only 2 values that can be used as index to this table. These are… |
| 1.3.6.1.4.1.11.2.14.11.5.1.38.1.1.1.2.1.1 | ColumnhpicfSnmpTrapSourceAddressType | accessible-for-notify | current | This table allows only 2 values that can be used as index to this table. These are: 1) hpicfSnmpResponseSourceAddressType = ipv4 Where user wants to configure … |
| 1.3.6.1.4.1.11.2.14.11.5.1.38.1.1.1.2.1.2 | ColumnhpicfSnmpTrapSourceAddrPolicy | read-create | current | This specifies the policy for selecting the source address for outgoing SNMP responses. a) rfc1517 This is the default behavior if no other policy is configure… |
| 1.3.6.1.4.1.11.2.14.11.5.1.38.1.1.1.2.1.3 | ColumnhpicfSnmpTrapSourceAddress | read-create | current | This object is used to set the IP address which will be used as source IP while sending the SNMP TRAPs. This object should be used in conjunction with the hpic… |
| 1.3.6.1.4.1.11.2.14.11.5.1.38.1.1.1.2.1.4 | ColumnhpicfSnmpTrapSourceAddrIfIndex | read-create | current | This object is used to set the interface whose IP address will be used as source IP while sending the SNMP TRAPs. This object should be used in conjunction wit… |
| 1.3.6.1.4.1.11.2.14.11.5.1.38.1.1.1.3 | ScalarhpicfSnmpAuthNotifyEnable | read-write | current | Controls whether hpicfSnmpAuthFail notifications will be generated. The default value is 1 (Enabled). A value of 2 represents Disabled. Writing this object req… |
| 1.3.6.1.4.1.11.2.14.11.5.1.38.1.2 | NodehpicfSnmpNotificationObjects | |||
| 1.3.6.1.4.1.11.2.14.11.5.1.38.1.2.1 | ScalarhpicfSnmpAuthFailCount | accessible-for-notify | current | A count of SNMP authorization failures detected by the SNMP entity. |
| 1.3.6.1.4.1.11.2.14.11.5.1.38.1.2.2 | ScalarhpicfSnmpAuthFailIPType | accessible-for-notify | current | Type of IP address contained in hpicfSnmpAuthFailIP. |
| 1.3.6.1.4.1.11.2.14.11.5.1.38.1.2.3 | ScalarhpicfSnmpAuthFailIP | accessible-for-notify | current | IP address of sender of message that failed authentication. |
| 1.3.6.1.4.1.11.2.14.11.5.1.38.2 | NodehpicfSnmpConformance | |||
| 1.3.6.1.4.1.11.2.14.11.5.1.38.2.1 | NodehpicfSnmpCompliances | |||
| 1.3.6.1.4.1.11.2.14.11.5.1.38.2.1.1 | CompliancehpicfSnmpCompliance | current | A compliance statement for HP Routing switches with SNMP | |
| 1.3.6.1.4.1.11.2.14.11.5.1.38.2.1.2 | CompliancehpicfSnmpCompliance1 | current | A compliance statement for HP Routing switches with SNMP | |
| 1.3.6.1.4.1.11.2.14.11.5.1.38.2.2 | NodehpicfSnmpCompliancesGroups | |||
| 1.3.6.1.4.1.11.2.14.11.5.1.38.2.2.1 | GrouphpicfSnmpResponseSourceAddrTableCompliancesGroup | current | A collection of objects allowing configuration of policies in the switch for selecting the source address used while generating SNMP response | |
| 1.3.6.1.4.1.11.2.14.11.5.1.38.2.2.2 | GrouphpicfSnmpTrapSourceAddrTableCompliancesGroup | current | A collection of objects allowing configuration of source addresses for SNMP traps generated by the switch. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.38.2.2.3 | GrouphpicfSnmpResponseSourceAddrTableGroup | current | Description. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.38.2.2.4 | GrouphpicfSnmpTrapSourceAddrTableGroup | current | Description. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.38.2.2.5 | GrouphpicfSnmpNotifyObjectGroup | current | The operational status of hpicfSwitchAuthServerFail notifications. The default value is 1 (Enabled). A value of 2 represents Disabled. Writing this object requ… | |
| 1.3.6.1.4.1.11.2.14.11.5.1.38.2.2.6 | GrouphpicfSnmpNotificationGroup | current | Description. |